Bang For Your Buck! Whiteline's Positive Shift Kit inserts into the factory gearbox mount and results in a greatly improved shift feel and response by reducing the compliance of the heavily voided factory mount.

• The latest in material formulation technology boasts resistance to oil, grease, ozone and weathering.
• Designed with the installer in mind by reducing the need of specialised skills, tools and equipment.
• Install guide included providing detailed instructions on how to install your new purchase .
• Supplied with extreme pressure molybdenum disulphide (LM) based grease for extended life.
• Inserts are designed to work with the original factory bushing rather than replacing it.

This Part Fits:

The Whiteline shifter bushing kit has been engineered to eliminate that sloppy, plush shifter feel found in the rubber OEM bushings. By drastically reducing the bushing compliance, improves the crispness of cross gate up and downshifts removing the potential of missed and poor shifts. Also incorporating a radius edged flanged bushing head reduces any potential of bushing grab or stiction on the mounting faces during the initial shifting moment allowing a bind free clean gear shift.

• Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
• Protective powder coating acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
• Whiteline's latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
• Install guide included providing detailed instructions on how to install your new Whiteline purchase.
• Internal grease reservoirs provide continual self lubrication for optimum friction management.
• Supplied with extreme pressure molybdenum disulphide (LM) based grease for extended life.

This Part Fits:

Factory Transmission mounts are built for comfort and the heavily voided Subaru transmission mounts are no exception. Reduce the lag in your shift response and feel by removing the slop from the rubber transmission mounting by inserting Whiteline's low compliance polymer insert. Designed to fill the voided areas in the transmission mount this achieves a crisp feel through gear changes and on/off throttle applications.

• Whiteline's latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
• Specially bonded design for optimised strength typically required in high load bearing applications.
• Specially bonded design for optimized strength typically required in high load bearing applications.
• Inserts are designed to work with the original factory bushing rather than replacing it.

This Part Fits:

Not your typical remove and replace bushing kit but simple installation means great for the DIYer's. Designed to work with the original bushing and eliminate over compliance or better known in motorsport as 'lost motion' of the rear crossmember. This Whiteline kit dramatically reduces rear cross member misalignment and movement which allows a more positive feel from the rear end during cornering.

• Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
• Protective powder coating acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
• Featuring premium anodized alloy materials, Whiteline alloy products are anodized providing a long-lasting protective barrier to corrosion and wear but they look great too.
• Whiteline's latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
• Install guide included providing detailed instructions on how to install your new Whiteline purchase.
• Internal grease reservoirs provide continual self lubrication for optimum friction management.
• Supplied with extreme pressure molybdenum disulphide (LM) based grease for extended life.

This Part Fits:

Not your typical remove and replace bushing kit but simple installation means great for the DIYer's. Designed to work with the original bushing and eliminate over compliance or better known in motorsport as 'lost motion' of the rear crossmember. This Whiteline kit dramatically reduces rear cross member misalignment and movement which allows a more positive feel from the rear end during cornering.

• Whiteline's latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
• Install guide included providing detailed instructions on how to install your new Whiteline purchase.
• Specially bonded design for optimised strength typically required in high load bearing applications.
• Internal grease reservoirs provide continual self lubrication for optimum friction management.
• Supplied with extreme pressure molybdenum disulphide (LM) based grease for extended life.
• Inserts are designed to work with the original factory bushing rather than replacing it.

This Part Fits:

Not your typical remove and replace bushing kit but simple installation means great for the DIYer's. Designed to work with the original bushing and eliminate over compliance or better known in motorsport as 'lost motion' of the rear crossmember. This Whiteline kit dramatically reduces rear cross member misalignment and movement which allows a more positive feel from the rear end during cornering.

• Whiteline's latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
• Install guide included providing detailed instructions on how to install your new Whiteline purchase.
• Specially bonded design for optimised strength typically required in high load bearing applications.
• Internal grease reservoirs provide continual self lubrication for optimum friction management.
• Supplied with extreme pressure molybdenum disulphide (LM) based grease for extended life.
• Inserts are designed to work with the original factory bushing rather than replacing it.

This Part Fits:

Subaru's rear subframe is mounted on rubber voided bushings which allows for a significant amount of compliance/movement in the frame during high cornering loads. Whiteline's low compliance polymer bushings eliminate this condition by positively locking in the frame position and removing the 'lateral walking' found when using high grip tires. The polymer bushing design has soft 'stand-off' buffers on the top and bottom surfaces of the bushing to allow slight vertical bushing movement of the subframe to eliminate that 'rock-solid' NVH feel and cushion against minor bumps and allow solid positive location when high torque and power is applied.

• Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
• Protective powder coating acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
• Whiteline's latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
• Install guide included providing detailed instructions on how to install your new Whiteline purchase.
• Internal grease reservoirs provide continual self lubrication for optimum friction management.
• Supplied with extreme pressure molybdenum disulphide (LM) based grease for extended life.

This Part Fits:

Bang For Your Buck! Whiteline's Positive Shift Kit inserts into the factory gearbox mount and results in a greatly improved shift feel and response by reducing the compliance of the heavily voided factory mount.

• Whiteline's latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
• Install guide included providing detailed instructions on how to install your new Whiteline purchase.
• Specially bonded design for optimised strength typically required in high load bearing applications.
• Specially bonded design for optimized strength typically required in high load bearing applications.
• Inserts are designed to work with the original factory bushing rather than replacing it.

This Part Fits:

Not your typical remove and replace bushing kit but simple installation means great for the DIYer's. Designed to work with the original bushing and eliminate over compliance or better known in motorsport as 'lost motion' of the rear crossmember. This Whiteline kit dramatically reduces rear cross member misalignment and movement which allows a more positive feel from the rear end during cornering.

• Featuring premium anodized alloy materials, Whiteline alloy products are anodized providing a long-lasting protective barrier to corrosion and wear but they look great too.
• Whiteline's latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
• Install guide included providing detailed instructions on how to install your new Whiteline purchase.
• Specially bonded design for optimised strength typically required in high load bearing applications.
• Internal grease reservoirs provide continual self lubrication for optimum friction management.
• Supplied with extreme pressure molybdenum disulphide (LM) based grease for extended life.
• Inserts are designed to work with the original factory bushing rather than replacing it.

This Part Fits:

The Whiteline kit replaces the bushings in the rear subframe to dramatically reduce rear cross member misalignment and movement which allows a more positive feel from the rear end during cornering. Recommended for motorsport applications.

• Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
• Protective powder coating acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
• Whiteline's latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
• Install guide included providing detailed instructions on how to install your new Whiteline purchase.
• Internal grease reservoirs provide continual self lubrication for optimum friction management.
• Supplied with extreme pressure molybdenum disulphide (LM) based grease for extended life.

This Part Fits:

Soft factory bushings whilst they do a good job of not transmitting engine vibration, they do create vague and unresponsiveness in the vehicles drive train. Under hard acceleration, the engine and transmission rotates, Whiteline's synthetic elastomer torque arm inserts work in conjunction with the OE rubber bushing giving your car better throttle response as well as more crisp and defined gear shifts. Suits both Automatic or manual transmissions .

• Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
• Whiteline's latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
• Install guide included providing detailed instructions on how to install your new Whiteline purchase.
• Designed with the installer in mind by reducing the need of specialised skills, tools and equipment.
• Supplied with extreme pressure molybdenum disulphide (LM) based grease for extended life.
• Inserts are designed to work with the original factory bushing rather than replacing it.

This Part Fits:

The Whiteline kit replaces the bushings in the rear subframe to dramatically reduce rear cross member misalignment and movement which allows a more positive feel from the rear end during cornering. Recommended for motorsport applications.

• Whiteline's latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
• Install guide included providing detailed instructions on how to install your new Whiteline purchase.
• Specially bonded design for optimised strength typically required in high load bearing applications.
• Internal grease reservoirs provide continual self lubrication for optimum friction management.
• Supplied with extreme pressure molybdenum disulphide (LM) based grease for extended life.
• Inserts are designed to work with the original factory bushing rather than replacing it.

This Part Fits:

Whiteline caster kits are designed to improve cornering grip and vehicle straight line stability. This kit is supplied with dual offset bushings to give greater steering feel, more steering weight, greater precision all through increased static caster and dynamic negative camber gain. In addition, Whiteline bushings provide improved braking performance, and less under load alignment change.

• Reduces compliance and deflection
• Improves alignment stability
• Long lasting material design
• Sharper handling response
• Direct fit bushing kit

This Part Fits:

A must for lowered Civics, Whiteline roll center and bump steer correction kits are designed to correct roll-center geometry using specially engineered ball-joints and tie rod ends. Raising the front roll-center results in a substantial increase to front roll resistance and a significant reduction in suspension compression of the outside front wheel during cornering. The result is more even weight distribution and improved tire contact ultimately improving front end grip and cornering speeds.

• Improved grip

This Part Fits:

Worn control arm bushings have a huge influence on vehicle stability, steering precision and braking efficiency. Replace worn bushings to as new condition utilising Whiteline's sealed spherical bearing.

• Engineered for dependable performance across a wide range of conditions
• Durable materials support long-term use and consistent reliability
• Designed for straightforward installation and dependable fit
• Kit contains 2 Bearings, 4 Tubes

This Part Fits:

Whiteline caster/camber kits are designed to improve cornering grip and vehicle straight line stability. This kit is supplied with dual offset bushings to give greater steering feel, more steering weight, greater precision all through increased static caster and dynamic negative camber gain. In addition, Whiteline bushings provide improved braking performance, and less under load alignment change.

• Kit contains: 2 Shell Bushings, 4 Bushings, 2 Tubes, 2 Washers, 1 Spanner Wrench
• Engineered fit supports consistent stability and handling performance
• High-quality material helps resist wear and extend service life
• Reduces noise and vibration for a smoother and quieter ride

This Part Fits:

Whiteline caster kits are designed to improve cornering grip and vehicle straight line stability. This kit is supplied with dual offset bushings to give greater steering feel, more steering weight, greater precision all through increased static caster and dynamic negative camber gain. In addition, Whiteline bushings provide improved braking performance, and less under load alignment change.

• Engineered to alter vehicles roll centre, increasing tyre grip to the road, optimising the vehicles steering and handling characteristics.
• Internal grease reservoirs on bushing provide continual self lubrication for optimum friction management.
• Specially bonded design for optimised strength typically required in high load bearing applications.
• The latest in material formulation technology boasts resistance to oil, grease, ozone and weathering
• Supplied with extreme pressure molybdenum disulphide (LM) based grease for extended life.
• Kit Contains 2 Shell Bushing

This Part Fits:

Whiteline caster kits are designed to improve cornering grip and vehicle straight line stability. This kit is supplied with dual offset bushings to give greater steering feel, more steering weight, greater precision all through increased static caster and dynamic negative camber gain. In addition, Whiteline bushings provide improved braking performance, and less under load alignment change.

• Engineered to alter/ optimise caster alignment to maximize tyre contact patch during roll, improve turn-in response & increase directional stability.
• Whiteline's latest technology synthetic elastomer formulation boasts resistance to oil, grease, ozone and weathering.
• Internal grease reservoirs provide continual self lubrication for optimum friction management.
• Kit Contains 2 Shell Bushings, 2 Spaces

This Part Fits:

A must for lowered vehicles, Whiteline roll centre correction kit, is designed to correct roll-centre geometry using specially engineered ball-joints. Raising the front roll-centre results in a substantial increase to front roll resistance and a significant reduction in suspension compression on the outside front tyre during cornering. The result is more even weight distribution and improved tyre contact ultimately improving front end grip, cornering speeds and tyre life when driving the vehicle to it?s potential.

• Engineered to alter vehicles roll centre, increasing tyre grip to the road, optimising the vehicles steering and handling characteristics.
• Kit Contains 2 Ball Joints

This Part Fits:

A must for lowered vehicles, Whiteline roll centre correction kit, is designed to correct roll-centre geometry using specially engineered ball-joints. Raising the front roll-centre results in a substantial increase to front roll resistance and a significant reduction in suspension compression on the outside front tyre during cornering. The result is more even weight distribution and improved tyre contact ultimately improving front end grip, cornering speeds and tyre life when driving the vehicle to it?s potential.

• Engineered to alter vehicles roll centre, increasing tyre grip to the road, optimising the vehicles steering and handling characteristics.
• Kit Contains 2 Ball Joints

This Part Fits:

A must for lowered vehicles, Whiteline roll centre correction kit, is designed to correct roll-centre geometry using specially engineered ball-joints. Raising the front roll-centre results in a substantial increase to front roll resistance and a significant reduction in suspension compression on the outside front tyre during cornering. The result is more even weight distribution and improved tyre contact ultimately improving front end grip, cornering speeds and tyre life when driving the vehicle to it?s potential.

• Engineered to alter vehicles roll centre, increasing tyre grip to the road, optimising the vehicles steering and handling characteristics.
• Kit Contains 2 Ball Joints

This Part Fits:

This easy to install kit is designed to change the inclination of the rear sub-frame whilst reducing bushing compliance. By arranging in different planes it is possible to induce rear squat (maximum traction) or anti-squat (drift) properties. This product may induce increased NVH levels.

• Internal grease reservoirs on bushing provide continual self lubrication for optimum friction management.
• Designed with the installer in mind by reducing the need of specialised skills, tools and equipment.
• The latest in material formulation technology boasts resistance to oil, grease, ozone and weathering
• Install guide included providing detailed instructions on how to install your new purchase .
• Supplied with extreme pressure molybdenum disulphide (LM) based grease for extended life.
• 2 Arms, Install Guide

This Part Fits:

Whiteline bump steer kit is designed to change bump steer characteristics depending on driving conditions. For racing it is beneficial to reduce the amount of bump steer to give a more positive feel - sharper handling - reduced understeer.

• Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come
• Engineered to alter/ eliminate unwanted bump steer, optimising the vehicles steering characteristics.
• 1 Bracket

This Part Fits:

Whiteline caster kits are designed to improve cornering grip and vehicle straight line stability. This kit is supplied with dual offset bushings to give greater steering feel, more steering weight, greater precision all through increased static caster and dynamic negative camber gain. In addition, Whiteline bushings provide improved braking performance, and less under load alignment change.

• 2 Shell Bushings, 2 Washers

This Part Fits:

A must for lowered vehicles, Whiteline camber adjusting correction kit, is designed to correct via fine tunning of camber settings with up to -3 degree in 1 deg increments of negative camber gain, perfect for track days and spirited driving! Resulting in a substantial increase to front roll resistance and a significant reduction in suspension compression on the outside front tire during cornering. The result is more even weight distribution and improved tire contact ultimately improving front end grip, cornering speeds and tire life when driving the vehicle to it's full potential.

• Engineered to alter/ optimise camber alignment to compensate for body roll, body distortion and tyre roll when cornering.
• Provides a window of adjustment to rectify or optimise a vehicles wheel alignment.
• Provides a window of adjustment to rectify or optimize a vehicles wheel alignment.
• Kit Contains 2 Ball Joints

This Part Fits:

Whiteline caster kits are designed to improve cornering grip and vehicle straight line stability. This kit is supplied with dual offset bushings to give greater steering feel, more steering weight, greater precision all through increased static caster and dynamic negative camber gain. In addition, Whiteline bushings provide improved braking performance, and less under load alignment change.

• Engineered to alter/ optimise camber alignment to maximize tyre contact patch during roll, improve turn-in response & increase directional stability.
• Specially bonded design for optimised strength typically required in high load bearing applications.
• Kit Contains 2 Bushings, 2 Tubes, 1 Tool

This Part Fits:

A must for lowered vehicles, Whiteline roll centre and bump steer correction kit, is designed to correct roll-centre geometry using specially engineered ball-joints. Raising the front roll-centre results in a substantial increase to front roll resistance and a significant reduction in suspension compression on the outside front tyre during cornering. The result is more even weight distribution and improved tyre contact ultimately improving front end grip, cornering speeds and tyre life when driving the vehicle to it’s potential.

• Durable materials help extend service life and reduce future maintenance needs
• Engineered components support consistent performance across the entire system
• Complete set designed to simplify installation and replacement process

This Part Fits:

Whiteline caster kits are designed to improve cornering grip and vehicle straight line stability. This kit is supplied with dual offset bushings to give greater steering feel, more steering weight, greater precision all through increased static caster and dynamic negative camber gain. In addition, Whiteline bushings provide improved braking performance, and less under load alignment change.

• Engineered to alter/ optimise caster alignment to maximize tyre contact patch during roll, improve turn-in response & increase directional stability.
• Engineered to alter/ optimize caster alignment to maximize tire contact patch during roll, improve turn-in response & increase directional stability.
• Provides a window of adjustment to rectify or optimise a vehicles wheel alignment.
• Kit Contains 2 Shell Bushings, 4 Bushings, 2 Tubes

This Part Fits:

Hard acceleration and braking allow the lower control arms to move around significantly causing axle tramp, poor launch and power delivery. Due to the dynamic nature of these lower control arm bushings this also alters the bump steer characteristics effectively generating significant 'toe in' under hard braking. When replacing the rear caster bushing with a low compliance bushing this alters the dynamic effect within the bump steer so Whiteline has cleverly packaged these items together to give you additional camber during turn in which is achieved through the offset in the low compliance bushing, improved anti dive geometry and neutralised bump steer correction. This kit tightens up the front suspension and makes it more nimble and responsive during acceleration, braking and cornering.

• Featuring anti geometry that works to aid traction by allowing the wheel to track the ground more precisely resulting in superior traction under power including cornering and dramatically reducing understeer and front wheel spin.
• Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
• Engineered to alter/ optimise caster alignment to maximize tyre contact patch during roll, improve turn-in response & increase directional stability.
• The latest in material formulation technology boasts resistance to oil, grease, ozone and weathering.
• Specially bonded design for optimised strength typically required in high load bearing applications.
• Install guide included providing detailed instructions on how to install your new purchase .
• Provides a window of adjustment to rectify or optimise a vehicles wheel alignment.

This Part Fits:

Whiteline caster kits are designed to improve cornering grip and vehicle straight line stability through increased static caster and dynamic negative camber gain. In addition, synthetic elastomer bushings provide improved steering feedback and braking performance.

• Protective plating on all metal components acts as a hard skin that is much tougher than conventional paint allowing this product to withstand the toughest conditions and resist corrosion for years to come.
• Engineered to alter/ optimise caster alignment to maximize tyre contact patch during roll, improve turn-in response & increase directional stability.
• Engineered to alter/ optimize caster alignment to maximize tire contact patch during roll, improve turn-in response & increase directional stability.
• The latest in material formulation technology boasts resistance to oil, grease, ozone and weathering.
• Internal grease reservoirs provide continual self-lubrication for optimum friction management.
• Articulation voids deliver necessary suspension articulation and/or compression under loads.
• Install guide included providing detailed instructions on how to install your new purchase .
• Supplied with extreme pressure molybdenum disulphide (LM) based grease for extended life.
• Precisely placed dampening voids further reduces harshness from sudden road inputs.
• Provides a window of adjustment to rectify or optimise a vehicles wheel alignment.

This Part Fits: