Fits 1989-1998 Nissan 240SX (Base, LE, SE, and XE models).

Engineered to reduce body roll and improve lateral load distribution, the Whiteline 24mm heavy-duty rear sway bar is designed to increase cornering grip and overall handling performance. This 2-point blade adjustable bar allows drivers to fine-tune the vehicle's chassis balance to suit specific driving conditions or preferences without compromising ride quality.

• Adjustable Performance: 2-point multi-point adjustment for precise handling calibration.
• Advanced Bushings: Includes synthetic elastomer bushings resistant to oil, grease, ozone, and weathering.
• Grease Retention: Internal bore knurling and grease reservoirs ensure continual self-lubrication for optimum friction management.
• Corrosion Resistance: Features a protective plating and powder coating finish to withstand harsh conditions.
• Lateral Locks: DIY lateral locks prevent the sway bar from shifting or moving sideways under heavy cornering loads.
• High-Strength Construction: Manufactured from high-quality spring steel for maximum rigidity and responsiveness.

This kit (MPN: BNR11XXZ) includes the 24mm adjustable sway bar, synthetic elastomer bushings, lateral locks, installation guide, and extreme pressure molybdenum disulphide (LM) based grease.

Fits select 2003-2009 Nissan 350Z and 2003-2008 Infiniti G35. This comprehensive Whiteline suspension kit is designed to significantly reduce body roll and improve cornering grip by replacing compliant factory sway bars with high-rigidity, adjustable alternatives.

The BNK006 kit features a 32mm 2-point adjustable front bar and a 20mm 3-point adjustable rear bar, allowing for precise tuning of the vehicle's handling balance to suit specific driving conditions. Included heavy-duty adjustable end links eliminate sway bar preload and allow for up to 25mm of on-car length adjustment. The synthetic elastomer bushings utilize internal bore knurling and grease retention lips to ensure consistent lubrication and silent operation.

• 32mm 2-point adjustable front sway bar and 20mm 3-point adjustable rear sway bar
• Heavy-duty end links with steel ball joints for increased rigidity and responsiveness
• Synthetic elastomer bushings resistant to oil, grease, and ozone
• DIY lateral locks prevent sideways bar movement under high lateral loads
• Forged ends for maximum strength at critical mounting points
• Protective powder coating and plating for long-term corrosion resistance
• Includes molybdenum disulphide (LM) grease and installation guide
• Manufacturer Part Number: BNK006

Fits 2012-2021 Nissan GT-R (Premium, Black Edition, Nismo, Track Edition, Pure, and 50th Anniversary Edition).

Engineered to reduce body roll and improve lateral load distribution, the Whiteline 33mm heavy-duty front sway bar increases cornering grip and overall handling performance. By spreading cornering forces more evenly across all four tires, this bar enhances safety and reduces tire wear without compromising ride quality or comfort. The 2-point blade adjustment allows drivers to fine-tune the vehicle's roll stiffness to suit specific driving conditions or track preferences.

This sway bar is finished with a durable protective powder coating designed to resist corrosion and withstand harsh undercar environments. It includes Whiteline's advanced synthetic elastomer bushings, featuring internal bore knurling and grease retention lips for consistent lubrication and noise-free operation. The elastomer formulation is specifically resistant to oil, grease, ozone, and weathering.

• Part Number: BNF87Z
• Diameter: 33mm
• Adjustment: 2-Point Adjustable
• Material: Heavy-duty spring steel with synthetic elastomer bushings
• Finish: Protective powder coating
• Kit Includes: (1) Sway bar, (2) End links, (2) Bushings, and (8) Washers

Fits select 2011-2023 Infiniti QX56, QX80, and Nissan Armada models. This Whiteline Heavy Duty Front Sway Bar is engineered to reduce body roll and improve cornering grip by distributing lateral loads more evenly across the tires. By increasing the front roll stiffness, this 38mm fixed-position bar enhances overall handling and stability without compromising ride quality or comfort.

Constructed for long-term durability on varied road conditions, this sway bar helps provide a more confident driving experience, particularly in high-center-of-gravity SUVs. It contributes to more uniform tire wear by maintaining a better contact patch during cornering and effective load distribution across the front axle.

• Diameter: 38mm
• Adjustment: Non-Adjustable (Fixed)
• Position: Front
• Manufacturer Part Number: BNF86
• Construction: Heavy Duty steel with durable finish
• Kit Includes: 1 Sway Bar, 2 Bushings, 2 Saddles

Fits 1989-1998 Nissan 240SX (Base, LE, SE, XE).

The Whiteline Heavy Duty BNF42Z front sway bar is engineered to reduce body roll and distribute lateral loads more evenly across the contact patches, significantly increasing cornering grip. This 27mm 3-point adjustable bar allows drivers to fine-tune the chassis balance to suit specific driving conditions or preferences without compromising ride quality.

Manufactured from high-strength steel, the sway bar is finished with protective plating and powder coating to resist corrosion and weathering. The kit includes Whiteline’s proprietary synthetic elastomer bushings, which feature internal bore knurling and grease reservoirs for consistent lubrication and friction management. Included DIY lateral locks prevent the bar from shifting during high-load cornering, maintaining precise suspension geometry.

• Part Number: BNF42Z
• Diameter: 27mm
• Adjustment: 3-point adjustable
• Material: High-strength steel with synthetic elastomer bushings
• Hardware: Includes DIY lateral locks and installation guide
• Lubrication: Molybdenum disulphide (LM) based grease included
• Finish: Multi-layer protective plating and powder coating

Fits select 2007-2025 Infiniti G35, G37 and Nissan 370Z, Z models.

The Whiteline BNF41Z front sway bar is a 27mm heavy-duty upgrade designed to reduce body roll and improve cornering grip by more evenly distributing lateral loads across the tires. This 2-point adjustable bar allows drivers to fine-tune the vehicle's handling characteristics to suit specific driving conditions or performance preferences without compromising ride quality.

Constructed with forged ends for maximum strength at the link mounting points, this sway bar features a protective powder-coated finish for superior corrosion resistance. The kit includes Whiteline’s advanced synthetic elastomer bushings, which utilize internal bore knurling and grease retention lips for consistent lubrication and friction management.

• Diameter: 27mm heavy-duty solid spring steel
• Adjustment: 2-point adjustable for fine-tuning
• Bushings: Oil and ozone-resistant synthetic elastomer
• Lateral Locks: Included to prevent sideways shifting under load
• Finish: Corrosion-resistant protective plating and powder coating
• Hardware: Includes molybdenum disulphide (LM) based grease and installation guide
• Manufacturer Part Number: BNF41Z

Fits 2009-2018 Nissan GT-R models (Base, Premium, Black Edition, Nismo, and Track Edition).

The Whiteline BNF40Z front sway bar is engineered to improve vehicle handling by reducing body roll and spreading lateral loads more evenly across the tires. This 33mm heavy-duty sway bar features a 2-point adjustable design, allowing drivers to fine-tune the GT-R's cornering characteristics to suit specific driving conditions or preferences without compromising ride quality.

• 33mm heavy-duty solid spring steel construction for maximum torsional stiffness.
• 2-point adjustability for precise handling calibration.
• Forged ends provide superior strength at the link mounting points.
• High-performance synthetic elastomer bushings with internal bore knurling for optimum grease retention.
• DIY lateral locks prevent sideways movement of the bar under heavy cornering loads.
• Protective powder coating for long-lasting corrosion resistance.
• Includes installation guide and all necessary mounting hardware.
• Manufacturer Part Number: BNF40Z

Fits 2003-2009 Nissan 350Z and 2003-2008 Infiniti G35. This Whiteline 33mm heavy-duty front sway bar is engineered to reduce body roll and improve cornering grip by spreading lateral loads more evenly across the tires. By flattening the car through the turns, the BNF33Z improves handling precision, safety, and tire wear without compromising ride quality.

Built for durability and performance, the bar features forged ends for maximum strength at the link mounting points. The 2-point adjustment allows drivers to fine-tune the stiffness of the front suspension to suit specific driving conditions or preferences. The kit includes Whiteline's advanced synthetic elastomer bushings, featuring internal bore knurling and grease retention lips to ensure consistent lubrication and silent operation.

• 33mm heavy-duty diameter for significant reduction in body roll
• 2-point adjustability for custom handling calibration
• Forged ends for superior strength and link alignment
• Synthetic elastomer bushings resistant to oil, grease, ozone, and weathering
• Internal grease reservoirs and supplied molybdenum disulphide (LM) grease for extended service life
• DIY lateral locks prevent sideways bar movement under heavy cornering loads
• Protective powder coating for high-level corrosion resistance
• Manufacturer Part Number: BNF33Z

Fits 1990-1998 Nissan 240SX (Base, LE, SE, XE).

Engineered to "Activate More Grip," the Whiteline BNF28Z 24mm heavy-duty front sway bar is designed to reduce body roll and lateral sway. By minimizing roll during cornering, lateral loads are spread more evenly across the tire contact patches, significantly increasing cornering grip and improving overall vehicle handling and safety without sacrificing ride quality or comfort.

This 2-point adjustable bar allows drivers to fine-tune the suspension stiffness to match specific driving conditions or track requirements. Built from durable materials for consistent reliability, this kit is designed for a straightforward installation as a direct upgrade to factory components.

• Manufacturer Part Number: BNF28Z
• Diameter: 24mm
• Adjustment: 2-point adjustable
• Kit Contents: 1 Sway Bar, 2 Bushings
• Position: Front

Fits 1994-2004 Nissan Skyline R33 GTS and R34 GT-T RWD models.

The Whiteline BNF24Z heavy-duty front sway bar is engineered to reduce body roll and spread lateral loads more evenly across the tires, significantly increasing cornering grip. This 24mm 4-point adjustable bar allows drivers to fine-tune the suspension's roll stiffness to suit specific track conditions or street driving preferences without compromising ride quality.

Constructed with a durable powder coating to resist corrosion, this kit is built for longevity. It features Whiteline's synthetic elastomer bushings designed with internal bore knurling and grease retention lips, ensuring the included molybdenum disulphide grease stays in place for silent, consistent performance.

• Part Number: BNF24Z
• Diameter: 24mm
• Adjustment: 4-point adjustable design
• Material: Heavy-duty steel with protective powder coating
• Bushings: Synthetic elastomer with internal grease reservoirs
• Installation: Replaces factory front sway bar

Kit Contains: 1 Sway Bar, 2 Bushings, and molybdenum disulphide (LM) grease.

Fits 2001-2011 Mercedes-Benz C-Class models, including C230, C240, C280, C300, C320, C350, and AMG variants (C32, C55, C63).

The Whiteline BMR99 22mm rear heavy-duty sway bar is engineered to reduce body roll and sway by spreading lateral loads more evenly across the tires. This increases cornering grip and improves overall vehicle balance. Unlike thinner OE bars, this 22mm fixed-rate bar offers higher torsional resistance, providing a significant handling upgrade without compromising ride quality or daily-driver comfort.

Constructed for longevity and precision, this sway bar features a protective powder coating that resists corrosion and weathering. The included mounts utilize advanced synthetic elastomer technology, designed with internal bore knurling and grease retention lips to ensure consistent lubrication and silent operation.

• Fixed 22mm diameter for increased roll stiffness
• High-strength material with a durable powder-coated finish
• Synthetic elastomer bushings resistant to oil, grease, and ozone
• Internal grease reservoirs for self-lubrication and friction management
• DIY Lateral locks to prevent shifting under heavy cornering loads
• Includes extreme pressure molybdenum disulphide (LM) grease for installation
• Manufacturer Part Number: BMR99

Fits select 2014-2020 Mercedes-Benz CLA250, CLA45 AMG, GLA250, and GLA45 AMG.

The Whiteline BMR96Z 24mm 2-hole adjustable sway bar is engineered to reduce body roll and sway by spreading lateral loads more evenly across the tires. This heavy-duty upgrade increases cornering grip and improves overall handling performance and safety without compromising ride quality or comfort. The 2-point adjustment allows drivers to fine-tune the vehicle's characteristics to suit specific driving preferences and conditions.

• Diameter: 24mm solid spring steel construction for increased torsional stiffness.
• Adjustability: 2-hole multi-point adjustment for precise handling balance.
• Bushing Technology: Synthetic elastomer bushings feature internal bore knurling and grease retention lips for superior lubrication and friction management.
• Finish: Heavy-duty powder coating provides a hard skin to resist corrosion and weathering.
• Lateral Locks: Included DIY lateral locks prevent the bar from shifting sideways under heavy cornering loads.
• Maintenance: Internal grease reservoirs and supplied molybdenum disulphide (LM) based grease ensure extended component life.
• Manufacturer Part Number: BMR96Z

Fits 2016-2025 Mazda MX-5 Miata and 2017-2020 Fiat 124 Spider.

The Whiteline BMR94Z 16mm 3-point adjustable sway bar is engineered to reduce body roll and improve cornering grip by distributing lateral loads more evenly across the tires. This kit allows you to fine-tune your vehicle's handling characteristics without compromising ride quality or comfort, making it a highly effective suspension upgrade for both the ND Miata and the Fiat 124 platform.

• Diameter: 16mm solid spring steel construction.
• Adjustability: 3-point multi-point adjustment allows for precision tuning to suit driving conditions.
• Forged Ends: Ensures maximum strength and integrity at the sway bar link mounting points.
• Premium Bushings: Utilizes synthetic elastomer formulation resistant to oil, grease, and ozone, featuring internal bore knurling for grease retention.
• Lateral Locks: Included DIY lateral locks prevent the sway bar from shifting sideways under heavy cornering loads.
• Finish: Protective powder coating and plating for superior corrosion resistance and durability.
• Maintenance: Internal grease reservoirs provide continual self-lubrication; supplied with molybdenum disulphide (LM) based grease.
• MPN: BMR94Z.

Each kit comes complete with a detailed installation guide and all necessary hardware for a direct bolt-on upgrade.

Fits select 2012-2018 Ford Focus models including Electric, S, SE, SEL, ST, and Titanium.

The Whiteline BMR93Z 24mm heavy-duty rear sway bar is engineered to reduce body roll and spread lateral loads more evenly across your tires. By increasing the roll stiffness of the rear suspension, this 2-point adjustable bar allows you to fine-tune your vehicle's handling characteristics for improved cornering grip and more predictable performance without compromising daily ride quality.

Constructed with forged ends for maximum strength at the link mounting points, this sway bar features a high-grade protective powder coating to resist corrosion in harsh environments. The kit includes DIY lateral locks to prevent sideways movement under heavy cornering loads and high-performance synthetic elastomer bushings. These bushings utilize internal bore knurling and grease retention lips for superior lubrication, while the PTFE lining eliminates the need for ongoing maintenance.

• Part Number: BMR93Z
• Diameter: 24mm
• Adjustment: 2-Point Multi-point adjustment
• Material: Heavy-duty spring steel with forged ends
• Bushings: PTFE-lined synthetic elastomer with lateral locks
• Finish: Protective plating and powder coating for corrosion resistance
• Includes: Sway bar, bushings, lateral locks, and installation guide

Fits 2006-2013 Mazda 3 i, S, and Mazdaspeed models.

The Whiteline BMR88Z Rear Heavy Duty Adjustable Sway Bar is engineered to reduce body roll and increase cornering grip by spreading lateral loads more evenly across the tires. This 27mm solid spring steel bar allows for precision handling improvements without sacrificing ride comfort, providing a significant upgrade over the factory rear stabilizer.

This kit features 2-point adjustability, enabling drivers to fine-tune the vehicle's balance to suit specific driving conditions or personal preferences. The bar is constructed with forged ends for maximum strength at the link mounting points and is finished in a durable powder coating to resist corrosion. Included synthetic elastomer bushings utilize internal bore knurling and grease retention lips to ensure consistent lubrication and silent operation.

• Part Type: Rear Sway Bar
• Diameter: 27mm heavy-duty solid steel
• Adjustability: 2-point multi-point adjustment
• Bushings: Synthetic elastomer with grease retention knurling
• Lateral Locks: Includes DIY lateral locks to prevent sideways shifting under load
• Finish: Protective powder coating for long-term corrosion resistance
• Hardware: High-quality mounting hardware and installation guide included
• Manufacturer Part Number: BMR88Z

Fits 2007-2017 Mitsubishi Lancer and Outlander models.

Engineered to "Activate More Grip," the Whiteline BMR86XZ rear sway bar is a 24mm heavy-duty blade-adjustable upgrade designed to minimize body roll and distribute lateral loads more evenly across your tires. This 3-point adjustable bar allows drivers to fine-tune vehicle handling characteristics to suit specific driving preferences or conditions without compromising ride quality or comfort.

The BMR86XZ kit features forged ends for maximum strength at the link mounting points and DIY lateral locks to prevent the bar from shifting sideways under heavy cornering loads. The included bushings are manufactured from a high-grade synthetic elastomer that resists oil, grease, and ozone, featuring internal bore knurling and grease retention lips for consistent lubrication and quiet operation.

• Part Number: BMR86XZ
• Diameter: 24mm
• Adjustment: 3-point blade adjustable for precise tuning
• Materials: Forged ends with a protective powder-coated finish for corrosion resistance
• Bushings: Synthetic elastomer with internal grease reservoirs
• Includes: Sway bar, bushings, lateral locks, molybdenum disulphide grease, and installation guide

Fits 2009-2015 Mitsubishi Lancer Ralliart and Ralliart Sportback.

The Whiteline BMR85XZ is a 24mm heavy-duty rear sway bar engineered to reduce body roll and improve lateral load distribution across your tires. By increasing the chassis's resistance to sway, this bar improves cornering grip and overall handling performance without sacrificing ride comfort. The 3-point blade adjustable design allows you to fine-tune your vehicle's roll stiffness to match your driving style or road conditions.

• Precision Tuning: 3-point adjustability provides multiple settings to dial in the perfect handling balance.
• Premium Construction: Forged ends ensure maximum strength and durability at the sway bar link mounting points.
• Advanced Bushing Technology: Includes synthetic elastomer mounts featuring internal bore knurling and grease retention lips for consistent lubrication.
• Corrosion Resistance: Finished in a heavy-duty powder coating to protect against the elements and road debris.
• Zero Shift: Supplied with DIY lateral locks to prevent the sway bar from sliding sideways under heavy cornering loads.
• Complete Installation Kit: Includes high-pressure molybdenum disulphide (LM) grease, hardware, and a detailed install guide.

Part Number: BMR85XZ

Fits 2008-2015 Mitsubishi Lancer Evolution X (GSR, MR, MR Touring, SE, and Final Edition).

The Whiteline BMR84Z heavy-duty rear sway bar is engineered to "Activate More Grip" by significantly reducing body roll during high-speed cornering. By stiffening the rear suspension's resistance to lateral movement, this 27mm bar spreads cornering loads more evenly across the tires. This results in increased grip and improved outright performance without compromising daily ride quality or comfort.

This 3-point adjustable bar allows drivers to fine-tune the vehicle's handling characteristics to match specific driving conditions or track requirements. The kit includes high-quality synthetic elastomer bushings featuring internal bore knurling and grease retention lips for consistent lubrication and silent operation.

• 3-Point Adjustability: Multi-point holes allow for precise tuning of roll stiffness to suit your driving style.
• Forged Ends: Ensures maximum strength and reliability at the sway bar link mounting points.
• Protective Finish: Durable powder coating acts as a hard skin to resist corrosion and weathering for years of service.
• DIY Lateral Locks: Prevents sideways shifting of the bar under heavy lateral loads during aggressive cornering.
• Premium Bushings: Advanced synthetic elastomer formulation is resistant to oil, grease, ozone, and weathering.

• Diameter: 27mm
• Adjustment: 3-Point Adjustable
• MPN: BMR84Z
• Includes: Sway bar, synthetic elastomer bushings, lateral locks, and installation guide

Fits 2006-2012 Ford Fusion, 2006-2007 Mazda 6 Mazdaspeed, and 2006-2011 Mercury Milan. This Whiteline 24mm 2-point adjustable sway bar is engineered to reduce body roll and spread lateral loads more evenly across the tires. By increasing cornering grip, this upgrade significantly improves handling, safety, and tire wear without compromising ride quality or comfort.

Constructed with durability in mind, the sway bar features a protective powder coating to resist corrosion and weathering. It includes Whiteline's latest synthetic elastomer bushings, featuring an internal bore knurling and grease retention lips for superior lubrication. The maintenance-free PTFE lining eliminates the need for periodic greasing, while the included DIY lateral locks prevent side-to-side shifting under heavy cornering loads.

• Part Number: BMR82Z
• Diameter: 24mm heavy-duty spring steel
• Adjustment: 2-point multi-adjustment to fine-tune handling characteristics
• Bushings: Synthetic elastomer with PTFE lining for low friction
• Hardware: Includes lateral locks and detailed installation guide
• Finish: Silver powder coating for maximum corrosion resistance

Fits 2006-2015 Mazda MX-5 Miata (All Submodels).

Engineered to reduce body roll and increase cornering grip, the Whiteline 16mm 3-point adjustable rear sway bar is designed to spread lateral loads more evenly across the tires. This heavy-duty upgrade improves handling and chassis response without compromising ride quality or comfort. The multi-point adjustment allows drivers to fine-tune the vehicle's roll stiffness to suit specific driving conditions or performance preferences.

Whiteline sway bar kits feature advanced synthetic elastomer bushings designed for longevity and performance. The internal bore knurling and grease retention lips ensure constant lubrication, while the included DIY lateral locks prevent the bar from shifting sideways under heavy cornering loads. The bar is finished in a protective powder coating for superior corrosion resistance.

• Part Number: BMR81Z
• Diameter: 16mm
• Adjustment: 3-Point Adjustable
• Material: High-strength spring steel with powder-coated finish
• Bushings: Synthetic elastomer with internal grease reservoirs
• Included Hardware: Lateral locks, mounting bushings, and molybdenum disulphide (LM) grease
• Installation: Replaces factory rear sway bar; installation guide included

Fits select 2002-2007 Mitsubishi Lancer models including ES, LS, OZ Rally, Ralliart, SE, and Sportback (Excludes Evolution models).

The Whiteline BMR79 Rear Heavy Duty Sway Bar is engineered to reduce body roll and improve vehicle handling by spreading lateral loads more evenly across the contact patch. This 18mm fixed-position bar provides a significant upgrade over the factory component, increasing cornering grip and improving overall stability without compromising ride quality or comfort.

Built to withstand harsh conditions, the bar features protective plating and powder coating for long-term corrosion resistance. The kit includes mounts utilizing Whiteline's synthetic elastomer formulation with internal bore knurling and grease retention lips for consistent lubrication. The addition of PTFE lining eliminates the need for frequent re-greasing by providing an exceptionally low coefficient of friction.

• Manufacturer Part Number: BMR79
• Diameter: 18mm
• Type: Heavy Duty Fixed Position
• Material: High-quality spring steel with protective powder coating
• Bushings: Synthetic elastomer with PTFE lining and grease retention lips
• Inclusions: DIY lateral locks and detailed installation guide

Fits select 2004-2018 Ford Focus and Mazda 3 models. The Whiteline BMR78XZ Heavy Duty 24mm 2-point adjustable rear sway bar is engineered to reduce body roll and sway during cornering. By minimizing lateral lean, this sway bar spreads cornering loads more evenly across the tires, increasing grip and improving overall handling performance without sacrificing ride comfort.

Constructed with a heavy-duty blade design, this bar features two points of adjustment, allowing you to fine-tune your vehicle's handling characteristics for different driving conditions. The kit includes Whiteline's proprietary synthetic elastomer bushings, which feature internal bore knurling and grease retention lips for optimal lubrication and resistance to oil, ozone, and weathering.

• Diameter: 24mm heavy-duty solid spring steel construction.
• Adjustability: 2-point adjustable blade for precise handling tuning.
• Bushing Technology: Synthetic elastomer bushings with knurled bores for superior grease retention.
• Finish: Protective powder coating for long-term corrosion resistance.
• Lateral Locks: Includes DIY lateral locks to prevent the sway bar from shifting under high cornering loads.
• Installation: Includes a detailed install guide; designed to replace factory components.
• MPN: BMR78XZ

Fits 2004-2011 Mazda RX-8 (Base, R3, Grand Touring, Sport, Touring, 40th Anniversary Edition, and Shinka).

Engineered to "Activate More Grip," the Whiteline BMR77Z rear sway bar is designed to reduce body roll and sway by spreading lateral loads more evenly across the contact patches. This 18mm heavy-duty bar features a 2-point adjustable design, allowing you to fine-tune your Mazda's handling characteristics for specific driving conditions or preferences without compromising ride quality.

The bar is constructed with forged ends for maximum strength at the mounting points and finished in a protective powder coating to resist corrosion. This kit includes Whiteline's advanced synthetic elastomer bushings, which utilize internal bore knurling and grease retention lips for consistent lubrication and friction management.

• Bar Diameter: 18mm
• Adjustment: 2-point multi-point adjustment for fine-tuning
• Forged ends for maximum structural integrity at the links
• Includes DIY lateral locks to prevent sideways movement under load
• Synthetic elastomer bushings resistant to oil, grease, and ozone
• Internal grease reservoirs for self-lubrication
• Supplied with molybdenum disulphide (LM) based grease
• Manufacturer Part Number: BMR77Z

Fits select 2007-2024 Mini Cooper, Cooper Clubman, and Cooper Paceman (Base, S, JCW, SE, and GP).

The Whiteline BMR74Z Rear Heavy Duty Adjustable Sway Bar is engineered to reduce body roll and improve handling by spreading lateral loads more evenly across the tires during cornering. By increasing roll stiffness, this 24mm sway bar helps maintain a flat cornering attitude, providing more grip and predictable performance without sacrificing ride comfort or quality.

• Reduces body roll and improves stability during high-speed cornering
• Durable 24mm construction designed for long-term reliability in various driving conditions
• Adjustable design allows for fine-tuning of the vehicle's handling balance
• Improves tire wear by distributing loads more effectively across the contact patch
• Direct-fit component replaces or upgrades the factory rear sway bar
• Manufacturer Part Number: BMR74Z

Fits select 2002-2018 Mini Cooper, Clubman, Coupe, Roadster, Countryman, and Paceman models. This Whiteline 20mm heavy-duty rear sway bar is engineered to reduce body roll and neutralize understeer by spreading lateral loads more evenly across all four tires. By increasing cornering grip and improving chassis balance, this 3-point adjustable bar allows you to fine-tune your Mini's handling characteristics to suit your driving style or specific track conditions.

Constructed for longevity and performance, the BMR72Z features a protective powder coating to resist corrosion and weathering. The kit includes Whiteline’s advanced synthetic elastomer bushings, designed with internal bore knurling and grease retention lips for consistent lubrication and quiet operation. To prevent shifting under heavy cornering, DIY lateral locks are included to maintain the bar's alignment within the chassis.

• Part Number: BMR72Z
• Diameter: 20mm solid spring steel
• Adjustment: 3-point multi-hole adjustment
• Bushings: Oil and ozone resistant synthetic elastomer
• Hardware: Lateral locks and molybdenum disulphide (LM) grease included
• Finish: Heavy-duty powder coating
• Installation: Direct bolt-on with included DIY guide

Fits select 2014-2016 Mazda 3 models including i Grand Touring, i Sport, i SV, i Touring, s Grand Touring, and s Touring.

The Whiteline BMR66Z Heavy Duty Adjustable Sway Bar is engineered to "Activate More Grip" by reducing body roll and lateral sway. By connecting the left and right suspension components, this 18mm rear sway bar ensures lateral loads are spread more evenly across the tires, increasing cornering grip and improving outright performance. The adjustable design allows enthusiasts to fine-tune the handling balance for specific driving conditions without sacrificing ride quality or comfort.

• Part Number: BMR66Z
• Diameter: 18mm
• Position: Rear
• Feature: Heavy-duty adjustable design for precision tuning
• Benefit: Reduces body roll and improves stability during cornering
• Construction: Durable materials designed for varied road conditions

Fits 2003-2008 Mitsubishi Lancer Evolution (including GSR, MR, RS, and SE submodels).

The Whiteline BMR65XZ Swaybar-X is engineered to "Activate More Grip" by significantly reducing body roll and lateral sway. This 24mm heavy-duty rear sway bar spreads lateral loads more evenly across the tire contact patches, increasing cornering grip and improving chassis balance without sacrificing ride quality. The 3-point blade adjustment allows drivers to fine-tune the vehicle's handling characteristics to suit specific track conditions or driving preferences.

• Diameter: 24mm solid spring steel construction for increased torsional stiffness
• Adjustability: 3-point multi-point blade adjustment for precision tuning
• Bushings: High-grade synthetic elastomer mounts featuring internal bore knurling and grease retention lips for optimal lubrication
• Durability: Forged ends provide maximum strength at the link mounting points, finished with a corrosion-resistant powder coating
• Stability: Included DIY lateral locks prevent the bar from shifting sideways under heavy cornering loads
• Manufacturer Part Number: BMR65XZ
• Included: Rear sway bar, synthetic elastomer bushings, lateral locks, and detailed installation guide

Fits 2003-2008 Mitsubishi Lancer Evolution (GSR, MR, RS, SE).

The Whiteline BMR65XXZ 26mm heavy-duty rear sway bar is engineered to reduce body roll and improve lateral grip by distributing cornering loads more evenly across the tires. This 3-point adjustable bar allows you to fine-tune your Lancer Evolution's handling characteristics to suit specific driving conditions or personal preference without compromising ride quality.

Constructed with forged ends for maximum strength at the link mounting points, the bar features a protective powder coating and plating to resist corrosion in harsh environments. It includes high-quality synthetic elastomer bushings featuring internal bore knurling and grease retention lips for consistent lubrication. The included DIY lateral locks prevent the bar from shifting or sliding under high lateral loads, maintaining precise suspension geometry.

• Manufacturer Part Number: BMR65XXZ
• Diameter: 26mm
• Adjustment: 3-point multi-point adjustment
• Construction: Forged ends with protective plating and powder coating
• Bushings: Synthetic elastomer resistant to oil, grease, and ozone
• Hardware: Includes DIY lateral locks and molybdenum disulphide (LM) grease
• Installation: Installation guide included with specific instructions

Fits 1990-2005 Mazda Miata (All models including Base, LS, Mazdaspeed, and M Edition).

Engineered to reduce body roll and neutralize handling, the Whiteline BMR12Z rear sway bar is a critical upgrade for NA and NB Miata owners looking to improve cornering grip. By distributing lateral loads more evenly across the tires, this 16mm heavy-duty bar increases stability and outright performance without sacrificing ride quality or comfort. The 3-point blade adjustment allows you to fine-tune the suspension balance to suit your driving preference or specific track conditions.

• 16mm solid spring steel construction for increased torsional stiffness
• 3-point blade adjustability for precise vehicle chassis tuning
• Synthetic elastomer bushings featuring internal bore knurling and grease retention lips for optimum lubrication
• Included DIY lateral locks prevent the bar from shifting sideways under high cornering loads
• Protective powder coating provides a durable skin that resists corrosion in harsh environments
• Internal grease reservoirs in the mounts ensure maintenance-free, quiet operation
• Supplied with extreme pressure molybdenum disulphide (LM) based grease
• Manufacturer Part Number: BMR12Z

Fits 2012-2018 Ford Focus models, including ST, Electric, S, SE, SEL, and Titanium.

The Whiteline BMK012 Front and Rear Sway Bar Kit is engineered to "Activate More Grip" by significantly reducing body roll and improving the distribution of lateral loads across your tires. By replacing the flexible factory components with high-strength alloy bars and rigid hardware, this kit enhances steering response and cornering stability without compromising daily ride quality. The multi-point adjustment allows drivers to fine-tune vehicle characteristics to suit specific driving preferences or road conditions.

• Precision Handling: Reduces sway and body roll to keep the tire contact patch flat during aggressive cornering and rapid lane changes.
• 3-Point Adjustment: Features a 16mm 3-point adjustable bar for customizable stiffness and handling balance.
• Heavy-Duty Links: Includes adjustable links that allow for up to 25mm of on-car length adjustment to eliminate sway bar preload.
• Advanced Bushings: Utilizes synthetic elastomer bushings resistant to oil, grease, and ozone, featuring internal bore knurling and grease retention lips for optimum lubrication.
• Superior Durability: Constructed from high-quality alloy with forged ends and finished with a protective powder coating that resists corrosion and weathering.
• Installation Hardware: Supplied with DIY lateral locks to prevent sideways movement, heavy-duty steel ball joint ends, and molybdenum disulphide (LM) based grease.

Manufacturer Part Number: BMK012