Fits select 2008-2017 Subaru Impreza, WRX, STI, Forester, and XV Crosstrek.

Chassis rigidity is essential for maintaining consistent suspension geometry. The Whiteline KBR14 Control Arm Support Brace is engineered to replace the factory OE plates, which are susceptible to bowing or warping under stress. By reinforcing the control arm mounting points, this lightweight alloy brace significantly reduces chassis flex, ensuring your suspension components operate as intended.

Crafted from premium anodized alloy, this brace provides a durable, corrosion-resistant barrier designed for longevity. On the road or track, this translates to sharper steering response, more predictable turn-in, and increased steering feedback by preventing alignment shifts during high-load cornering.

• Reduces chassis flex at critical control arm mounting points
• Improves turn-in precision and steering wheel feedback
• Maintains alignment angles and effective spring rates under load
• Constructed from high-grade, lightweight anodized alloy
• Direct replacement for warped or thin factory mounting plates
• Includes detailed installation guide for a straightforward bolt-on process
• Manufacturer Part Number: KBR14

Fits select 1960-1985 Chevrolet Corvette, Impala, Ford Falcon, Mustang, and Mazda RX-7.

The Whiteline KBR10 sway bar mount saddle is a high-strength replacement for worn, bent, or corroded factory brackets. Precision-engineered from premium alloy, this saddle features a protective anodized finish that creates a long-lasting barrier against wear and environmental corrosion. This is a critical component for maintaining the structural integrity of your vehicle's stabilizer system, ensuring that sway bar bushings remain securely seated during hard cornering.

• Manufacturer Part Number: KBR10
• Mounting Dimensions: 65mm center-to-center bolt hole spacing
• Material: High-grade anodized alloy for superior corrosion resistance
• Application: Direct replacement for OE sway bar mounting saddles on various classic domestic and import chassis

Whether restoring a C2/C3 Corvette or stiffening the front end of a first-generation Mustang, the KBR10 provides the durability and exact tolerances required for performance suspension setups.

Fits select 2022-2026 Audi A3 Quattro, S3, and Volkswagen Golf R. This Whiteline 24mm 2-point adjustable rear sway bar is designed to neutralize body roll and improve lateral grip by more effectively distributing cornering loads across all four tires.

By increasing the rear roll stiffness, this sway bar (MPN BWR29Z) significantly improves handling balance and turn-in response. The 2-point adjustability allows drivers to fine-tune the stiffness, making it a versatile upgrade for both daily driving and performance environments without compromising ride quality. Constructed from high-strength materials and finished for long-term durability, it replaces the factory bar to provide consistent, dependable performance.

• Bore Diameter: 24mm
• Adjustment: 2-Point adjustable for fine-tuning roll resistance
• Direct fitment for MQB Evo chassis models
• Reduces body roll and improves steering precision
• Includes all necessary hardware for installation
• Part Number: BWR29Z

Vehicle Fitment:

Designed to reduce body roll and improve handling, the Whiteline BWR25Z 22mm 2-point adjustable rear sway bar kit increases cornering grip by spreading lateral loads more evenly across the tires. This kit allows drivers to fine-tune vehicle balance without sacrificing ride quality, making it a critical upgrade for performance driving or correcting understeer.

Fits select 2015-2025 Audi A3 Quattro, Q3, RS3, S3, TT Quattro, TTS Quattro, and Volkswagen Arteon, Golf Alltrack, Golf R, and Golf SportWagen models.

• 2-Point Adjustability: Allows for precise tuning of the rear roll stiffness to suit driving conditions or track setups.
• Forged Ends: Ensures maximum strength and structural integrity at the sway bar link mounting points.
• Advanced Bushings: Includes synthetic elastomer bushings with a PTFE lining for a low coefficient of friction, eliminating the need for periodic lubrication.
• Bore Knurling: Internal bushing knurling and grease retention lips ensure optimum lubrication and performance.
• Lateral Locks: Includes DIY lateral locks to prevent sideways movement or shifting of the bar under heavy cornering loads.
• Superior Finish: Features protective powder coating and plating to resist corrosion and weathering in harsh environments.
• Part Number: BWR25Z
• Kit Includes: 22mm adjustable sway bar, synthetic elastomer bushings, lateral locks, and installation guide.

Fits select 2015-2025 Audi A3 Quattro, Q3, RS3, S3, TT, and Volkswagen Arteon, Golf R, Golf Alltrack, and Tiguan. This Whiteline 24mm 2-point adjustable sway bar is engineered to reduce body roll and spread lateral loads more evenly across the contact patch, significantly increasing cornering grip and handling balance.

Constructed with forged ends for maximum strength at the link mounting points, the bar features a heavy-duty protective coating designed to resist corrosion in harsh undercar environments. The kit includes Whiteline’s latest synthetic elastomer bushings, featuring internal bore knurling and grease retention lips for consistent lubrication. These bushings utilize a PTFE lining to provide an exceptionally low coefficient of friction, eliminating the need for periodic re-greasing and preventing binding.

The 2-point adjustability allows drivers to fine-tune the vehicle's oversteer or understeer characteristics to match specific driving conditions or performance needs. Included DIY lateral locks prevent the bar from shifting horizontally under heavy cornering loads, ensuring the suspension geometry remains consistent.

• Part Number: BWR25XZ
• Diameter: 24mm solid spring steel
• Adjustment: 2-point adjustable for precise tuning
• Bushings: PTFE-lined synthetic elastomer (maintenance-free)
• Hardware: Includes DIY lateral locks and high-quality mounting hardware
• Finish: Protective powder coating and corrosion-resistant plating
• Benefit: Reduces body roll and improves tire wear without compromising ride quality

Fits select 2015-2026 Audi A3, Volkswagen GTI, Golf, Arteon, and Jetta GLI models. This Whiteline BWR24Z 22mm 2-point adjustable sway bar is engineered to reduce body roll and increase cornering grip by spreading lateral loads more evenly across the tires. By improving the vehicle's balance, this upgrade enhances handling and safety without sacrificing ride quality or comfort.

Constructed with forged ends for maximum strength at the link mounting points, this heavy-duty sway bar features a multi-point adjustment system that allows you to fine-tune your suspension's stiffness to match your driving style. The kit includes advanced synthetic elastomer bushings featuring internal bore knurling and grease retention lips to ensure consistent lubrication and silent operation.

• Diameter: 22mm heavy-duty construction.
• Adjustability: 2-point adjustment for precise handling tuning.
• Bushing Material: Oil, grease, and ozone-resistant synthetic elastomer.
• Bushings: PTFE-lined for low friction; includes internal knurling for grease retention.
• Finish: Corrosion-resistant protective plating and powder coating.
• Lateral Locks: Includes DIY lateral locks to prevent sideways movement under cornering loads.
• Hardware: Forged ends and complete mounting hardware included.
• MPN: BWR24Z

Fits select 1998-2012 Audi TT and Volkswagen Beetle, Cabrio, Golf, Jetta, and R32 (1.8T).

Engineered to "Activate More Grip," the Whiteline BWR22XZ 24mm 3-point adjustable sway bar is the most effective way to reduce body roll and improve handling. By increasing the vehicle's roll stiffness, this bar ensures lateral loads are spread more evenly across the tires, resulting in increased cornering grip and sharper turn-in response without sacrificing ride comfort.

• 24mm diameter manufactured from high-quality spring steel for maximum rigidity.
• 3-point adjustability allows drivers to fine-tune handling balance to suit specific driving conditions.
• Includes synthetic elastomer bushings featuring internal bore knurling and grease retention lips for consistent lubrication and long-term performance.
• Finished with protective plating and powder coating for superior corrosion resistance against the elements.
• DIY lateral locks are included to prevent sideways movement of the bar under heavy cornering loads.
• Designed to eliminate the flex associated with original equipment components.
• Manufacturer Part Number: BWR22XZ

Fits select 2004-2018 Audi A3, Q3, TT, and Volkswagen Golf, GTI, Jetta, and Tiguan (2.0T / 1.8T).

Engineered to "Activate More Grip," the Whiteline BWR21XZ is a 24mm 2-point adjustable X-Heavy Duty rear sway bar designed to reduce body roll and improve handling. By more evenly distributing lateral loads across the tires, this bar increases cornering grip and performance without compromising ride quality or comfort. The multi-point adjustment allows drivers to fine-tune the vehicle's characteristics to suit specific driving conditions or personal preferences.

Built for durability and precision, the sway bar features forged ends for maximum strength at the link mounting points. It includes DIY lateral locks to prevent shifting or sideways movement under heavy cornering loads. The bar is finished with a protective plating and powder coating to resist corrosion in the harshest environments.

• Part Number: BWR21XZ
• Diameter: 24mm
• Adjustment: 2-point multi-adjustment
• Construction: Forged ends with protective powder coating
• Bushings: Synthetic elastomer with internal knurling and grease retention lips
• Features: PTFE lining for low friction and DIY lateral locks
• Included: Sway bar, bushings, mounting hardware, and installation guide

Fits select 2004-2019 Audi A3, Q3, TT, and Volkswagen Beetle, CC, Eos, Golf, GTI, Jetta, Passat, and Rabbit models (2.0T / 1.8T). This fitment is specific to Front-Wheel Drive (FWD) applications.

Engineered to "Activate More Grip," the Whiteline BWR20XZ X-Heavy Duty sway bar is designed to significantly reduce body roll and lateral sway. By minimizing roll during cornering, this 24mm bar spreads lateral loads more evenly across all four tires, increasing the contact patch and improving overall handling balance. The 3-point adjustability allows drivers to fine-tune the vehicle's oversteer or understeer characteristics to suit specific driving conditions or personal preference.

• Diameter: 24mm solid spring steel construction.
• Adjustability: 3-point multi-hole adjustment for precision tuning.
• Forged Ends: Ensures maximum strength and durability at the link mounting points.
• Bushings: Synthetic elastomer formulation resistant to oil, grease, and ozone weathering.
• Lubrication: Internal bore knurling and grease retention lips for consistent performance.
• Finish: Protective plating and heavy-duty powder coating for superior corrosion resistance.
• Lateral Locks: Includes DIY lateral locks to prevent shifting under high cornering loads.
• Installation: Includes all necessary bushings and a detailed installation guide.
• Manufacturer Part Number: BWR20XZ

Fits select 2004-2019 Audi A3, TT, and Volkswagen Beetle, CC, Eos, Golf, GTI, Jetta, Passat, Rabbit, and Tiguan (2.0T / 1.8T).

The Whiteline BWK002 Sway Bar Kit is a comprehensive handling solution designed to reduce body roll and increase cornering grip. This kit features 24mm front and rear sway bars, both engineered with 3-point adjustability. This allow drivers to fine-tune the vehicle's balance and roll stiffness to suit specific driving conditions or track setups.

Each kit includes heavy-duty sway bar links manufactured from high-quality alloy with steel ball joint ends. These links allow for on-car length adjustment of up to 25mm, enabling you to eliminate sway bar preload during installation. To ensure consistent performance and quiet operation, the included bushings are made from a proprietary synthetic elastomer that is resistant to oil, grease, and ozone. The internal bore knurling and grease retention lips provide superior lubrication and longevity.

• Part Number: BWK002
• Bar Diameter: 24mm Front / 24mm Rear
• Adjustment: 3-Point Front and Rear
• Construction: Forged ends for maximum strength at mounting points
• Finish: Protective powder coating and plating for superior corrosion resistance
• Hardware: Includes heavy-duty adjustable links and DIY lateral locks to prevent bar shifting
• Bushings: Synthetic elastomer with internal knurling for grease retention

Fits select 2015-2020 Audi A3 Quattro, S3, and RS3, and 2015-2019 Volkswagen Golf R, Alltrack, and SportWagen. This Whiteline 26mm 2-point adjustable sway bar is engineered to reduce body roll and improve handling by spreading lateral loads more evenly across the tires during cornering.

The BWF22Z sway bar features forged ends for maximum strength at the link mounting points and is finished with a protective powder coating to resist corrosion. It includes high-performance bushings made from a synthetic elastomer formulation resistant to oil and ozone. These bushings utilize a PTFE lining to eliminate the need for lubrication, while the internal bore knurling and grease retention lips ensure quiet operation and long-term performance.

• 26mm heavy-duty spring steel construction
• 2-point multi-adjustment for fine-tuning handling characteristics
• Forged ends for superior structural integrity
• PTFE-lined synthetic elastomer bushings (no grease required)
• DIY lateral locks to prevent sway bar shifting under load
• Protective plating and powder coat finish for corrosion resistance
• Manufacturer Part Number: BWF22Z

Fits select 2015-2026 Audi A3 and Volkswagen Golf, Golf SportWagen, and GTI models. Check the fitment table for specific submodel compatibility.

Engineered to improve cornering grip and overall handling, the Whiteline BWF21XZ 24mm heavy-duty front sway bar reduces body roll by more evenly spreading lateral loads across all four tires. This 2-point adjustable bar allows drivers to fine-tune the vehicle's roll stiffness to suit specific driving conditions or personal preferences without compromising ride quality.

This sway bar features forged ends for maximum strength at the link mounting points and comes equipped with DIY lateral locks to prevent shifting or sideways movement under heavy cornering loads. The included bushings utilize Whiteline's latest synthetic elastomer formulation with a PTFE lining, providing an extremely low coefficient of friction that eliminates the need for periodic lubrication.

• Diameter: 24mm solid spring steel construction
• Adjustment: 2-point adjustable for precise handling tuning
• Corrosion Protection: Protective plating and powder coating for long-lasting durability
• Grease-Free Bushings: Internal PTFE lining removes the need for grease and prevents squeaking
• Lateral Locks: Included to maintain horizontal alignment of the bar
• MPN: BWF21XZ

Fits select 2004-2018 Audi A3, Q3, TT, TTS and Volkswagen Eos, Golf, GTI, Jetta, Rabbit, and Tiguan (2.0T / 1.8T).

Engineered to improve cornering grip and handling balance, the Whiteline 24mm 3-point adjustable sway bar is designed to significantly reduce body roll. By distributing lateral loads more evenly across the tires, this bar increases overall performance and safety without compromising ride quality. The multi-point adjustment allows for precise fine-tuning of your vehicle's handling characteristics to suit specific driving conditions or preferences.

This X-heavy duty bar features forged ends for maximum strength at the link mounting points and comes equipped with DIY lateral locks to prevent shifting under cornering loads. The included bushings utilize synthetic elastomer technology with internal bore knurling and grease retention lips for consistent lubrication and noise-free operation. Every metal component is finished with a protective coating to resist corrosion and weathering in harsh environments.

• Part Number: BWF20XZ
• Diameter: 24mm
• Adjustment: 3-Point adjustable for fine-tuned handling
• Material: High-strength steel with forged ends
• Bushings: Synthetic elastomer with grease retention lips
• Hardware: Includes lateral locks and premium mounting hardware
• Finish: Protective powder coating for superior corrosion resistance

Fits select 2004-2019 Audi A3, TT, and Volkswagen Beetle, CC, Eos, Golf, GTI, Jetta, Passat, and Rabbit (1.8T / 2.0T).

Engineered to "Activate More Grip," the Whiteline 24mm X-Heavy Duty front sway bar is designed to significantly reduce body roll and improve cornering performance. By spreading lateral loads more evenly across the tires, this bar increases mechanical grip and provides more predictable handling without compromising ride quality. The 3-point adjustability allows drivers to fine-tune the vehicle's balance to suit specific driving conditions or track layouts.

Construction features forged ends for maximum strength at the link mounting points, protected by a heavy-duty powder coating and plating to resist corrosion. The kit includes Whiteline's latest synthetic elastomer bushings, featuring an internal bore knurling and grease retention lips for optimal lubrication and silent operation. DIY lateral locks are also included to prevent the bar from shifting sideways under heavy cornering loads.

• Part Number: BWF19XZ
• Diameter: 24mm
• Adjustment: 3-Point adjustable
• Material: Forged steel with protective powder coating
• Bushings: Synthetic elastomer with grease retention knurling
• Installation: DIY lateral locks and detailed guide included

Fits select 2019-2026 BMW Z4 and Toyota GR Supra models.

Engineered to "Activate More Grip," the Whiteline BTR99Z heavy-duty rear sway bar is designed to reduce body roll and improve lateral load distribution across your tires. By increasing roll stiffness with a larger 18mm diameter, this adjustable bar enhances cornering grip and handling precision without compromising ride quality. The multi-point adjustment allows you to fine-tune your vehicle's handling characteristics to suit specific driving conditions or personal preference.

This kit features high-quality synthetic elastomer bushings designed with internal bore knurling and grease retention lips for superior lubrication and service life. The bar itself is finished in a durable protective powder coating to resist corrosion, while forged ends ensure maximum strength at the sway bar link mounting points.

• Manufacturer Part Number: BTR99Z
• Diameter: 18mm
• Adjustment: Multi-point adjustable for fine-tuning
• Construction: Forged ends for maximum strength and performance
• Bushings: Advanced synthetic elastomer with internal grease reservoirs
• Hardware: DIY lateral locks included to prevent sideways shifting under load
• Finish: Corrosion-resistant powder coating with anodized alloy components
• Includes: Extreme pressure molybdenum disulphide (LM) based grease

Fits 1992-2000 Lexus SC300 and SC400 (Base).

Engineered to reduce body roll and spread lateral loads more evenly across the tires, the Whiteline 22mm heavy-duty rear sway bar is designed to increase cornering grip and improve outright handling. This suspension upgrade provides a significant improvement in vehicle balance and safety without negatively affecting ride quality or comfort.

The BTR79Z features a 3-point adjustable design, allowing you to fine-tune the handling characteristics of your Lexus to suit your driving style or specific road conditions. The kit includes Whiteline’s proprietary synthetic elastomer bushings, which utilize internal bore knurling and grease retention lips for superior lubrication and long-term friction management. The bar is finished in a durable protective powder coating to resist corrosion and withstand harsh undercar environments.

• Diameter: 22mm heavy-duty construction
• Adjustability: 3-point multi-point adjustment holes
• Bushings: Synthetic elastomer resistant to oil, grease, ozone, and weathering
• Finish: Silver powder coating for maximum durability
• Hardware: Includes DIY lateral locks to prevent bar shifting under load
• Lubrication: Supplied with extreme pressure molybdenum disulphide (LM) grease
• Installation: Includes detailed install guide; replaces factory sway bar
• Part Number: BTR79Z

Fits 2000-2005 Toyota Celica GT and GTS.

The Whiteline BTR74Z rear sway bar is engineered to reduce body roll and increase cornering grip by spreading lateral loads more evenly across the tires. This 20mm heavy-duty bar features a 3-point adjustable design, allowing you to fine-tune your vehicle's handling characteristics to suit your driving style or specific road conditions without compromising ride quality or comfort.

• 20mm solid spring steel construction for increased torsional stiffness.
• 3-point adjustability for precise handling calibration and vehicle balance.
• Forged ends ensure maximum strength and reliability at the sway bar link mounting points.
• High-performance synthetic elastomer bushings with internal bore knurling and grease retention lips for optimum lubrication.
• Included DIY lateral locks prevent the bar from shifting sideways under heavy cornering loads.
• Protective powder coating and plating provide a durable barrier against corrosion and environmental wear.
• Manufacturer Part Number: BTR74Z
• Includes sway bar, bushings, lateral locks, and a detailed installation guide.

Fits 1993-1997 Toyota Corolla models including Base, CE, DX, and LE trim levels.

The Whiteline BTR71 rear sway bar is engineered to "Activate More Grip" by significantly reducing body roll and sway during cornering. By increasing the lateral stiffness of the rear suspension, this 18mm heavy-duty fixed bar spreads cornering loads more evenly across the tires. This results in increased grip and improved overall handling balance without compromising ride quality or comfort. Constructed from solid spring steel and finished with a protective powder coating, this bar is built to withstand harsh road conditions while resisting corrosion.

• Diameter: 18mm solid spring steel construction for increased torsional stiffness.
• Advanced Bushings: Includes synthetic elastomer mounts with internal bore knurling and grease retention lips for optimum lubrication and quiet operation.
• Lateral Locks: Includes DIY lateral locks to prevent the sway bar from shifting sideways under heavy cornering loads.
• Resilient Finish: Protective powder coating acts as a durable skin against oil, grease, ozone, and weathering.
• Installation: Direct fitment for factory mounting points; includes comprehensive installation guide.
• Manufacturer Part Number: BTR71

Fits 1986-1992 Toyota Supra Base and Turbo models.

Engineered to "Activate More Grip," the Whiteline BTR70Z heavy-duty rear sway bar is a 22mm upgrade designed to significantly reduce body roll and improve handling on the MK3 Supra. By increasing roll stiffness, this bar spreads lateral loads more evenly across the tire contact patches, resulting in increased cornering grip and better overall performance without compromising ride quality.

This kit features 3-point adjustability, allowing you to fine-tune your vehicle's handling balance to suit your driving style or specific road conditions. The included bushings utilize Whiteline's latest synthetic elastomer formulation with internal bore knurling and PTFE lining, providing a low coefficient of friction and eliminating the need for periodic lubrication.

• Diameter: 22mm solid spring steel
• Adjustment: 3-point multi-hole design for precise tuning
• Bushings: PTFE-lined synthetic elastomer for quiet, grease-free operation
• Lateral Locks: Included DIY locks prevent sideways movement under cornering loads
• Finish: Protective powder coating and plating for superior corrosion resistance
• Installation: Includes all necessary hardware and detailed install guide
• MPN: BTR70Z

Fits 1993-1998 Toyota Supra Base and Twin Turbo models.

The Whiteline BTR68Z rear sway bar is engineered to reduce body roll and maximize cornering grip on the JZA80 chassis. By increasing the rear roll stiffness, this 20mm heavy-duty bar helps distribute lateral loads more evenly across the tire contact patches, improving overall handling balance and stability without sacrificing ride comfort. The 3-point adjustability allows you to fine-tune the vehicle's oversteer/understeer characteristics to suit your driving style or specific track conditions.

• 20mm heavy-duty solid spring steel construction for increased torsional stiffness.
• 3-point adjustability for precise handling calibration.
• Protective powder coating for long-term corrosion resistance in harsh environments.
• Advanced synthetic elastomer bushings featuring internal bore knurling and grease retention lips for consistent lubrication.
• Included DIY lateral locks prevent the bar from shifting sideways under high cornering loads.
• Direct-fit design mounts to factory locations with the included installation guide.
• Manufacturer Part Number: BTR68Z

Fits select 1990-2007 Toyota Land Cruiser and 1996-1997 Lexus LX450 (Base).

The Whiteline BTR46X 30mm fixed position sway bar is engineered to reduce body roll and increase cornering grip for the 80 and 105 series chassis. By better distributing lateral loads across the tires, this heavy-duty upgrade improves handling stability and safety without compromising ride quality. The 30mm solid spring steel construction replaces the smaller factory bar to provide a more stable platform during cornering and off-road articulation.

This kit features Whiteline's advanced synthetic elastomer bushings, designed with internal bore knurling and grease retention lips for consistent lubrication and silent operation. The bar is finished with a durable protective plating and powder coating to resist corrosion in harsh underbody environments. For a complete installation, the kit includes DIY lateral locks to prevent the bar from shifting sideways under heavy cornering loads.

• Part Number: BTR46X
• Diameter: 30mm
• Type: Fixed Position
• Bushing Material: High-durability synthetic elastomer
• Installation: Direct bolt-on, estimated 1-hour install time
• Included: Sway bar, bushings, lateral locks, molybdenum disulphide grease, and installation guide
• Warranty: 3 Year / 60,000 Mile Limited Warranty

Fits 1997-2006 Toyota Camry (Base, CE, LE, SE, XLE). This Whiteline 20mm fixed-position rear sway bar is engineered to reduce body roll and spread lateral loads more evenly across the tires, resulting in increased cornering grip and improved vehicle handling without compromising ride comfort.

Constructed for durability and precision, the BTR39 features forged ends for maximum strength at the sway bar link mounting points and a protective powder-coated finish to resist corrosion. The kit includes synthetic elastomer bushings designed with internal bore knurling and grease retention lips for consistent lubrication and noise-free operation. DIY lateral locks are also provided to prevent shifting or sideways movement of the bar under heavy cornering loads.

• Bar Diameter: 20mm
• Configuration: Fixed position
• Material: High-quality spring steel with forged ends
• Bushings: Synthetic elastomer with internal grease reservoirs
• Finish: Heavy-duty powder coating
• Included Hardware: Bushings, lateral locks, installation guide, and extreme pressure molybdenum disulphide (LM) grease
• Manufacturer Part Number: BTR39

Fits 1990-1993 Toyota Celica All Trac and GTS All Trac (ST185) models.

Engineered to 'Activate More Grip,' this Whiteline 20mm heavy-duty rear sway bar is the primary tool for correcting the handling balance of your AWD Celica. By reducing body roll, this bar spreads lateral loads more evenly across the tire contact patches, increasing cornering grip and improving outright performance. The 3-point adjustable design allows you to fine-tune your suspension's stiffness to suit specific driving conditions or tire setups without compromising daily ride comfort.

Built for durability and precision, the BTR29Z features forged ends for maximum strength at the link mounting points and a protective powder-coated finish to resist corrosion. The kit includes high-performance synthetic elastomer bushings designed with internal bore knurling and grease retention lips for consistent, quiet lubrication. DIY lateral locks are also provided to prevent the bar from shifting sideways under heavy cornering loads.

• Part Number: BTR29Z
• Diameter: 20mm
• Adjustment: 3-Point Adjustable
• Material: Heavy-duty spring steel with forged ends
• Bushings: Synthetic elastomer with grease retention knurling
• Finish: Protective powder coating and corrosion-resistant plating
• Includes: Sway bar, bushings, lateral locks, and installation guide

Fits 1985-1995 Toyota MR2 (Base, GT, Super Charged, and Turbo).

This Whiteline 20mm heavy duty rear sway bar is engineered to reduce body roll and improve handling by spreading lateral loads more evenly across the tires. By increasing cornering grip and improving chassis balance, this 3-point adjustable bar allows you to fine-tune your vehicle's characteristics to suit your driving style without compromising ride quality or comfort.

The sway bar is finished with a protective powder coating for superior corrosion resistance. It features Whiteline’s advanced synthetic elastomer bushings, designed with internal bore knurling and grease retention lips for consistent lubrication and friction management. Included DIY lateral locks prevent the bar from shifting sideways under heavy cornering loads.

• Diameter: 20mm
• Adjustment: 3-point multi-point adjustment
• Material: High-strength spring steel with powder-coated finish
• Bushings: Synthetic elastomer with resistance to oil, grease, and ozone
• Hardware: Lateral locks and extreme pressure molybdenum disulphide (LM) grease included
• Manufacturer Part Number: BTR28Z

Fits 1984-1987 Toyota Corolla Sport DLX, GTS, and SR5 (AE86).

The Whiteline BTR25Z 20mm heavy-duty rear sway bar is engineered to reduce body roll and improve lateral grip by spreading cornering loads more evenly across all four tires. This 3-point adjustable bar allows you to fine-tune your AE86's handling characteristics to suit your driving style or track conditions without sacrificing ride quality. By eliminating the flex associated with original equipment, these high-strength components increase rigidity and steering responsiveness during initial turn-in and high-speed lane changes.

Constructed from high-quality steel with a protective powder coating and plating, this sway bar is built to resist corrosion and weathering. The kit includes Whiteline's advanced synthetic elastomer bushings, featuring internal bore knurling and grease retention lips for consistent lubrication and noise-free operation. DIY lateral locks are also provided to prevent the bar from shifting or moving sideways under heavy lateral loads.

• Bar Diameter: 20mm
• Adjustment: 3-Point Adjustable for precise handling tuning
• Material: High-quality steel with protective plating and powder coating
• Bushings: Oil, grease, and ozone-resistant synthetic elastomer
• Installation: Includes DIY lateral locks and molybdenum disulphide (LM) grease
• Manufacturer Part Number: BTR25Z

Fits 1981-1985 Toyota Celica Supra.

The Whiteline BTR21Z is an 18mm 3-point adjustable heavy duty rear sway bar engineered to reduce body roll and improve handling performance. By increasing the torsional stiffness of the rear suspension, this bar spreads lateral loads more evenly across the tires, resulting in significantly enhanced cornering grip and vehicle stability without compromising ride comfort.

Whiteline utilizes high-quality synthetic elastomer bushings featuring internal bore knurling and grease retention lips for superior lubrication and noise-free operation. The sway bar is finished in a durable protective powder coating that acts as a hard skin to resist corrosion and endure harsh driving conditions. The 3-point adjustability provides the flexibility to fine-tune your suspension's roll stiffness for specific driving needs.

• Part Number: BTR21Z
• Diameter: 18mm
• Adjustability: 3-Point
• Finish: Powder Coated
• Bushing Material: Synthetic Elastomer
• Hardware: High-strength bolts, nuts, and molybdenum disulphide (LM) based grease

Kit Includes: 1 Sway Bar, 2 Bushings, 2 Links, 2 Plates, 10 Washers, 4 Bolts, 4 Nuts, and Grease.