These NX switch panels offer a clean and attractive switching solution for nitrous systems as well as many other electrical devices. These switch panels include a variety of interchangeable laser engraved switch nameplates allowing you to change any switch to any location.

• Includes A Variety Of Interchangeable Laser Engraved Nameplates

This Part Fits:

The BantamX will save hours of wiring & installation time! It is a small, 8-circuit (expandable) control system that provides a clean (one ethernet cable into the cab!) and safe way to power and control 12/24VDC accessories. Due to the small footprint of the BantamX, the placement options are endless! No cutting, fishing wires into the cab or tapping into the vehicle‘s electrical system. It’s the perfect over-all solution for all your aftermarket electrical accessories with options unmatched by anyone.

• It’s the perfect over-all solution for all your aftermarket electrical accessories with options unmatched by anyone

The BantamX will save hours of wiring & installation time! It is a small, 8-circuit (expandable) control system that provides a clean (one ethernet cable into the cab!) and safe way to power and control 12/24VDC accessories. Due to the small footprint of the BantamX, the placement options are endless! No cutting, fishing wires into the cab or tapping into the vehicle‘s electrical system. It’s the perfect over-all solution for all your aftermarket electrical accessories with options unmatched by anyone.• Fully programmable, digital controlled system• 8 circuits rated at 30 amps at 12.5 VDC per circuit• 16-position terminal block (easily attach accessories)• 2 controller ports (RJ45) for Ethernet cables• Integrated low voltage cutoff (LVCO) battery protection w/ optional override• One ATM mini-style fuse for LVCO protection & reset• Failsafe self-healing fault protection system (from 1.5 to 30amps)• Current-sensing MOSFETs controlled by a microprocessor (no fuses & relays)• 100amp in-line fuse• Nylon braided battery cables are hi-strand crosslinked copper wire with a silicone jacket• Operates on 12VDC or 24VDC• 8-position input terminal block for controlling outputs• Built-in Bluetooth capabilities for remote control• Protection against: overheating, over-current, shorts, reverse polarity & field collapse• Ignition control and safety lock-out for switches 1 and 2 (optional)• Up to 4 BantamX units can be daisy chained & controlled by one Touchscreen• On-demand wireless software updates/upgradesHARDWARE:• Powder coated steel base w/ built in hardware• Silicone gasket for weatherproofing• Simple thumb screw fastening aluminum lid with convenient silkscreened outlines for supplied legend placement• Universal & vehicle specific mounting options• Robust insulated base and coverFEATURES AVAILABLE THROUGH sPOD MOBILE APP (free):Each switch can be programmed for:•Dimming•Strobe•Flash•Momentary•Switch Linking•On Road

• ‚Ä¢ Fully programmable, digital controlled system‚Ä¢ 8 circuits rated at 30 amps at 12

sPOD BantamX Touchscreen vehicle-specific kit for Ford F150 (’21-on) and Ford F-150 Raptor (’21-on) has been designed specifically to integrate the sPOD Touchscreen panel into your cabin seamlessly while providing a safe place to access all your controls. Designed to replace the in-cab sunglass holder, our plate has been specifically designed at the perfect angle to access switches easily.

• Designed to replace the in-cab sunglass holder, our plate has been specifically designed at the perfect angle to access switches easily

This Part Fits:

Add-On Touchscreen For 8 Circuit Systems (BantamX)Time to add a Touchscreen to your 8 Circuit systems? This can be added to your existing 8 circuit systems or used as a second Touchscreen for your existing 8 circuit system. The Touchscreen is not compatible with the 6 circuit systems. Available with 10' or 30' control cable.The industry leader in power and control solutions.sPOD systems utilize automotive grade approved high-power, high-temp, ultra-reliable components with a maximum 100 amp capacity! OEM vehicle specific simple installation hardware, engineered and 100 percent manufactured in the United States since 2006.The touchscreen controller is small but packs a big punch! (3-3/4w X 2-7/8h X 5/8 thick) The control module is a 3.5-inch LED-backlit TFT LCD screen with a resolution of 320 x 240, 16.7m colors, and a viewing angle of 180 degrees housed in a billet aluminumcase. The touchscreen comes with its ownuniversal mounting bracket. The connection between the 8 Circuit System and the touchscreen uses a standard Ethernet cable that is 10 feet long.The sPOD Touchscreen is a resistive touchscreen – meaning unlike most smartphones, it works based on pressure. A stronger touch is necessary for it to respond. This type of touchscreen is very common in industrial electronics, like what you may find for many vehicle touchscreens. For more information, please refer to the Get To Know Your Touchscreen booklet.!!! NOTE !!! The touchscreen is NOT weather resistant and should NOT be exposed to the elements. Water or any liquids will damage the touchscreen and void the warranty.Please note:The touchscreen display will become inoperable if ambient temperatures drop below 45 degrees F.Let the temperature of the cab of the vehicle warm up before operation.Benefits:Reduced installation time and labor allowing for mounting and connection of eight switches at one time versus individually.Reduced wire harness complexity, using one harness to our controller to accommodate up to

• The industry leader in power and control solutions

Upgrade your Ram 1500, 2500, 3500, 4500, and 5500 gas or diesel truck, as well as select 2018 to 2024 Ram, Jeep, Dodge, and Chrysler vehicles with the Kleinn RSRAM72 wireless remote start system. Built for ultimate compatibility, this premium upgrade works flawlessly with both traditional key-to-start and modern push-to-start systems, and is designed specifically for automatic transmission vehicles only. This kit allows you to effortlessly cool down your truck in the summer and warm it up in the winter before you ever step inside the cab. Featuring a simple installation, the system utilizes plug-and-play T-harness connectors, though some specific vehicle models may require one to three wire-to-wire connections. Once physical installation is complete, programming the remote start unit is required. A Fortin programmer interface is included with the kit, and you will need a Windows personal computer or laptop with a universal serial bus port to complete the module programming. Once configured, it works perfectly with your factory keyless remote control using a convenient lock, unlock, lock sequence, completely eliminating the need to carry around two separate remotes while providing a dependable 15-minute runtime. For those looking to expand their setup, the system is compatible with single upgrades such as long-range remote kits or a smartphone control module.

• Notes: Includes Programmer (Requires Windows PC), 15 Minute Runtime, 45 Minute Install, 1-2 Wire Splices Required on Ram Trucks
• Simple Installation includes Plug-n-Play T-harness connectors, Ram Trucks require 1-2 wire to wire connections
• Compatible Upgrades: RFKIT1, RFKIT4, RFKIT2W, SMARTPHONE CONTROL - (Module supports one upgrade at a time)
• Cool down your truck in the summer and Warm it in the winter
• Remotes: Uses Factory Remote (Lock, Unlock, Lock)
• Ignition Type: Key-to-Start or Push-to-Start
• Fuel Type: Gas or Diesel

This Part Fits:

Several TRIGGER 4 PLUS Wireless Accessory Controllers can be used together to control up to 24 accessories. When mounted to a UTV roll bar, the buttons on the remote are more easily accessible than dash switches. There is no straining against seat belts to reach the dash, just a quick reach up to flip a switch on the remote. We get asked this a lot, so...Please do not swap higher capacity fuses into lower capacity circuits. Each circuit is engineered to handle only the stated load, and doing so will damage the TRIGGER and void its warranty.Extend Control With The TRIGGER ACS Plus app for iOS and Android Devices! The Bluetooth App will control on/off and dimming functions as well as flashing when used with LED or conventional lighting. Of course, it's quick and easy to set up and allows for extended control and user customization. Set switch functionality to either standard rocker or momentary, and edit individual accessory names. Use the app to "TRIGGER" lights from outside the vehicle whenever you might need to activate an accessory on demand. Save time, simplify your installs, and get out on the trail: Pull The TRIGGER!

• Please note: Due to Federal regulations surrounding lithium battery cells, any TRIGGER Controller products shipping by air (FedEx 2nd Day or FedEx Overnight services) will have their batteries removed before shipment.
• You can control it from your mobile device with our free TRIGGER ACS PLUS App for iOS/Android!
• High intensity LED's indicate circuit status, blue for circuit on, red for blown fuse
• Includes 4 wire harnesses with waterproof connectors: two 10 gauge and two 12 gauge
• Waterproof case design, withstands temps from below freezing to 250 degrees F
• Wireless Battery Operated RF remote switch module with ambient backlight
• Built in fuses with o-ring sealed cover: two 30 amp and two 10 amp
• Free 3-year warranty that covers manufacturing defects
• Two 10 amp fused circuits w/12-24 Volt output
• Two 30 amp fused circuits w/12-24 Volt output
• Comes with switch labels too!
• Accepts 12-24 Volt input

sPOD BantamX Touchscreen vehicle-specific kit for Toyota Tundra (’22-on) has been designed specifically to integrate the sPOD Touchscreen panel into your cabin seamlessly while providing a safe place to access all your controls. Designed to replace the in-cab sunglass holder, our plate has been specifically designed at the perfect angle to access switches easily.

• Designed to replace the in-cab sunglass holder, our plate has been specifically designed at the perfect angle to access switches easily

sPOD BantamX HD vehicle-specific kit for Ford F150 (’21-on) and Ford F-150 Raptor (’'21-on) has been designed specifically to integrate the sPOD HD panel into your cabin seamlessly while providing a safe place to access all your controls. Designed to replace the in-cab sunglass holder, our plate has been specifically designed at the perfect angle to access switches easily.

• Designed to replace the in-cab sunglass holder, our plate has been specifically designed at the perfect angle to access switches easily

This Part Fits:

The SourceLT will save hours of wiring & installation time! It is a small,solid-state6-circuit control system that provides a clean (one cable into the cab!) and safe way to power and control 12VDC accessories. Due to the small footprint of the SourceLT, the placement options are endless! No cutting, fishing wires into the cab or tapping into the vehicle‘s electrical system. It’s the perfect over-all solution for all your aftermarket electrical accessories with options unmatched by anyone.

• It’s the perfect over-all solution for all your aftermarket electrical accessories with options unmatched by anyone

The SourceLT will save hours of wiring & installation time! It is a small,solid-state6-circuit control system that provides a clean (one cable into the cab!) and safe way to power and control 12VDC accessories. Due to the small footprint of the SourceLT, the placement options are endless! No cutting, fishing wires into the cab or tapping into the vehicle‘s electrical system. It’s the perfect over-all solution for all your aftermarket electrical accessories with options unmatched by anyone.

• It’s the perfect over-all solution for all your aftermarket electrical accessories with options unmatched by anyone

This is an add-on BantamX for existing sPOD systems/controllers only! Controller not included. !!! NOTE !!! At least one sPOD controller must be connected in order for the system to work properly.The BantamX will save hours of wiring & installation time! It is a small, 8-circuit (expandable) control system that provides a clean (one ethernet cable into the cab!) and safe way to power and control 12/24VDC accessories. Due to the small footprint of the BantamX, the placement options are endless! No cutting, fishing wires into the cab or tapping into the vehicle‘s electrical system. It’s the perfect over-all solution for all your aftermarket electrical accessories with options unmatched by anyone.• Fully programmable, digital controlled system• 8 circuits rated at 30 amps at 12.5 VDC per circuit• 16-position terminal block (easily attach accessories)• 2 controller ports (RJ45) for Ethernet cables• Integrated low voltage cutoff (LVCO) battery protection w/ optional override• One ATM mini-style fuse for LVCO protection & reset• Failsafe self-healing fault protection system (from 1.5 to 30amps)• Current-sensing MOSFETs controlled by a microprocessor (no fuses & relays)• 100amp in-line fuse• Nylon braided battery cables are hi-strand crosslinked copper wire with a silicone jacket• Operates on 12VDC or 24VDC• 8-position input terminal block for controlling outputs• Built-in Bluetooth capabilities for remote control• Protection against: overheating, over-current, shorts, reverse polarity & field collapse• Ignition control and safety lock-out for switches 1 and 2 (optional)• Up to 4 BantamX units can be daisy chained & controlled by one Touchscreen• On-demand wireless software updates/upgradesHARDWARE:• Powder coated steel base w/ built in hardware• Silicone gasket for weatherproofing• Aluminum lid• Vehicle specific mounting options• Robust insulated base and coverFEATURES AVAILABLE THROUGH sPOD MOBILE APP (free):Each switch ca

• Due to the small footprint of the BantamX, the placement options are endless! No cutting, fishing wires into the cab or tapping into the vehicle‚Äòs electrical system

The BantamX will save hours of wiring & installation time! It is a small, 8-circuit (expandable) control system that provides a clean (one ethernet cable into the cab!) and safe way to power and control 12/24VDC accessories. Due to the small footprint of the BantamX, the placement options are endless! No cutting, fishing wires into the cab or tapping into the vehicle‘s electrical system. It’s the perfect over-all solution for all your aftermarket electrical accessories with options unmatched by anyone.

• It’s the perfect over-all solution for all your aftermarket electrical accessories with options unmatched by anyone

The BantamX will save hours of wiring & installation time! It is a small, 8-circuit (expandable) control system that provides a clean (one ethernet cable into the cab!) and safe way to power and control 12/24VDC accessories. Due to the small footprint of the BantamX, the placement options are endless! No cutting, fishing wires into the cab or tapping into the vehicle‘s electrical system. It’s the perfect over-all solution for all your aftermarket electrical accessories with options unmatched by anyone.

• It’s the perfect over-all solution for all your aftermarket electrical accessories with options unmatched by anyone

Have the freedom to control anywhere with the BantamX wireless switch controller from sPOD™. Designed to be paired with the sPOD™ app on your phone or tablet while saving hours on wiring and installation time. It is a small solid-state 8-circuit (expandable) control system that provides a clean and safe way to power and control 12/24VDC accessories. Due to the small footprint of the BantamX power control module, the mounting location options are endless! No cutting, fishing wires into the cab or tapping into the vehicle ‘s electrical system. It’s the perfect overall solution for all your aftermarket electrical accessories with options unmatched by anyone. Pair the BantamX with the sPOD app on your phone or tablet, you have a controller that can be used anywhere. Backed by sPOD's 5-year manufacturer warranty*, stay in control with the sPOD™ BantamX power management system. Download the sPOD app from Apple App Store or Google Play.

• Due to the small footprint of the BantamX power control module, the mounting location options are endless! No cutting, fishing wires into the cab or tapping into the vehicle ‘s electrical system

sPOD SourceLT Mini6 vehicle-specific kit for Ford F-150 (’21-on) and Ford F-150 Raptor (’21-on) has been designed specifically to integrate the sPOD Mini6 panel into your cabin seamlessly while providing a safe place to access all your controls. Designed to replace the in-cab sunglass holder, our plate has been specifically designed at the perfect angle to access switches easily.

• Designed to replace the in-cab sunglass holder, our plate has been specifically designed at the perfect angle to access switches easily

This Part Fits:

NOTE: This system will not fit the Jeep Wrangler 392 V8.

• Battery protection

This Part Fits:

**Please expect a 2-4 week lead time on product**The BantamX will save hours of wiring & installation time! It is a small, 8-circuit (expandable) control system that provides a clean (one ethernet cable into the cab!) and safe way to power and control 12/24VDC accessories. Due to the small footprint of the BantamX, the placement options are endless! No cutting, fishing wires into the cab or tapping into the vehicle‘s electrical system. It’s the perfect over-all solution for all your aftermarket electrical accessories with options unmatched by anyone.• Fully programmable, digital controlled system• 8 circuits rated at 30 amps at 12.5 VDC per circuit• 16-position terminal block (easily attach accessories)• 2 controller ports (RJ45) for Ethernet cables• Integrated low voltage cutoff (LVCO) battery protection w/ optional override• One ATM mini-style fuse for LVCO protection & reset• Failsafe self-healing fault protection system (from 1.5 to 30amps)• Current-sensing MOSFETs controlled by a microprocessor (no fuses & relays)• 100amp in-line fuse• Nylon braided battery cables are hi-strand crosslinked copper wire with a silicone jacket• Operates on 12VDC or 24VDC• 8-position input terminal block for controlling outputs• Built-in Bluetooth capabilities for remote control• Protection against: overheating, over-current, shorts, reverse polarity & field collapse• Ignition control and safety lock-out for switches 1 and 2 (optional)• Up to 4 BantamX units can be daisy chained & controlled by one Touchscreen• On-demand wireless software updates/upgradesHARDWARE:• Powder coated steel base w/ built in hardware• Silicone gasket for weatherproofing•Simple thumb screw fastening aluminum lid with convenient silkscreened outlines for supplied legend placement• Universal & vehicle specific mounting options• Robust insulated base and coverFEATURES AVAILABLE THROUGH sPOD MOBILE APP (free):Each switch can be programmed for:•Dimming•Strobe

• ‚Ä¢ Fully programmable, digital controlled system‚Ä¢ 8 circuits rated at 30 amps at 12

This Part Fits:

The BantamX will save hours of wiring & installation time! It is a small, 8-circuit (expandable) control system that provides a clean (one ethernet cable into the cab!) and safe way to power and control 12/24VDC accessories. Due to the small footprint of the BantamX, the placement options are endless! No cutting, fishing wires into the cab or tapping into the vehicle‘s electrical system. It’s the perfect over-all solution for all your aftermarket electrical accessories with options unmatched by anyone.

• It’s the perfect over-all solution for all your aftermarket electrical accessories with options unmatched by anyone

This Part Fits:

The Trigger 6 SHOOTER Wireless Accessory Control System substantially saves your electronic accessories' installation time! Eliminate the need to run wires under the dash or through the firewall of a vehicle when wiring accessories. It also adds functionality such as an RF remote control for activating installed accessories from outside the vehicle and dimming/flashing functions for installed lighting. In addition, fused circuits with LED indicators notify you of blown fuses. The included battery-powered RF remote utilizes a universal mounting system that will accommodate round surfaces as well as flat surfaces. Its buttons are back-lit and it is programmable for security or use with additional remotes. Several Trigger control boxes and remotes can be used together to control up to 24 accessories. When mounted to a UTV roll bar, the buttons on the remote are more easily accessible than dash switches. No straining against seat belts to reach the dash, just a quick reach up to tap the remote. The Bluetooth App will control on/off and dimming functions as well as flashing when used with LED or conventional lighting. It is simple to set up and allows for user customization. Use the app to "Trigger" lights from outside the vehicle whenever you might need to activate an accessory on demand.

• Built-in Bluetooth battery monitor - see connected battery voltage in real-time on the TRIGGER ACS PLUS app
• Backlit switches when optionally connected to 12 Volt power via an 8' long, thin 28 gauge harness
• You can control it from your mobile device with our free TRIGGER ACS PLUS App for iOS/Android!
• Built in DIN connector for use of conventional toggle switches (harness sold separately)
• High intensity LED's indicate circuit status, blue for circuit on, red for blown f
• Low voltage cut off will shut down the 6 Shooter if battery voltage gets too low
• Waterproof case design, withstands temps from below freezing to 250 degrees F
• Built in fuses with o-ring sealed cover: two 30 amp, two 10 amp, two 5 amp
• RF Remote with rocker-style switches usable inside or outside the vehicle
• 100 amp fuse installed on positive input wire for whole system protection
• 12 to 24 volt input, 3 wires, ground, switched positive, battery positive
• Six 12-24 volt output harnesses with pre-installed waterproof connectors
• Includes six 8-foot-long wire harnesses with waterproof connectors
• Manual buttons for individual circuit power on top of control box
• Free 3-year warranty that covers manufacturing defects
• Wireless back-lit RF remote rocker switch module
• Two 30, two 10, and two 5 amp fused circuits
• Set custom backlight colors on the remote!
• Comes with switch labels too!
• Accepts 12-24 Volt input

Custom Switch Panel for 6th Gen Camaros. Switch panel mounts discretely in the center console by drilling 2 small holes in the bottom of the console. Keeps your unsuspecting passenger completely unaware of your extra power until the console is opened.Includes:Aluminum laser engraved and anodized switch panel.Switches for Nitrous Arm, Purge, Bottle Heater and Bottle Opener.Mounting tabs

• Quick and Easy Installation

This Part Fits:

If you have room for a gauge you can now also have a custom NX switch panel!! These switch panels fit into any 2-1/16 gauge pod and come with all the switches and LED indicator lights. The switch panel is a full billet aluminum design with laser etching for Nitrous, Bottle Heater, Purge, and Bottle Opener. The switch panel fits tightly in any 2 and 1/16 in. gauge pod, and comes with a keeper on the back side to keep it from moving or twisting. Comes with switches for, Bottle Opener, Nitrous Arm (with LED), Bottle Opener (with LED), Purge.

• Comes w/ Switches For Bottle Opener/Bottle Heater/ Nitrous/Purge

These NX switch panels offer a clean and attractive switching solution for nitrous systems as well as many other electrical devices. These switch panels include a variety of interchangeable laser engraved switch nameplates allowing you to change any switch to any location.

• Includes A Variety Of Interchangeable Laser Engraved Nameplates

This Part Fits: