Fits select 2019-2026 Chevrolet Silverado 1500 and GMC Sierra 1500 models with a 6ft 6in bed.

The BAKFlip MX4 (GEN 3) is a premium hard folding truck bed cover engineered for maximum durability and a sleek, low-profile appearance. Constructed with heavy-duty aluminum top panels reinforced by a high-density polymer core, this next-generation cover is 22% stronger than previous versions. Its textured matte black finish is UV and scratch-resistant, providing a flush-mount look that practically disappears into your truck's profile.

Security and weather protection are significantly enhanced in this generation. The MX4 features a patented automatic latching system with re-engineered lock components for better resistance against forced entry. Revised EPDM rubber perimeter seals and tight-fit clamps minimize water intrusion, while an extra-long dual-action tailgate seal allows you to close the tailgate regardless of the cover's position. When you need full bed access, the panels fold upright against the cab, secured by prop rods and protected by premium rubber bumpers.

• Manufacturer Part Number: 448131
• Construction: Polymer-reinforced aluminum panels
• Weight Capacity: 400 lbs (evenly distributed)
• Finish: Textured matte black
• Installation: Click-in design for 12% faster setup compared to Gen 2
• Bed Access: 100% bed access with panels folded against the cab
• Safety: Maintains 3rd brake light visibility
• Warranty: 5-year manufacturer warranty
• Origin: Assembled in Missouri, USA

Fits select 2019-2026 Chevrolet Silverado 1500 and GMC Sierra 1500 models (including LTD/Limited) with a 5' 8" bed.

The BAKFlip MX4 (GEN 3) is the next evolution of the industry's most popular hard folding tonneau cover. Engineered for maximum durability and security, this latest generation features high-density polymer-reinforced aluminum top panels that are 22 percent stronger than the original design. The heavy-duty panels and side rails support up to 400 lbs of evenly distributed weight while maintaining a sleek, flush-mount profile that sits level with your truck's bed rails.

Weather protection is enhanced through revised EPDM rubber perimeter seals and a 13 percent longer dual-action tailgate seal that allows you to close the tailgate regardless of the cover's position. Security is handled by a patented automatic latching system with re-engineered components to resist forced entry. The textured matte black finish provides a premium look that is scratch and UV-resistant.

• Manufacturer Part Number: 448130
• 400 lbs. weight capacity (evenly distributed)
• High-density polymer-reinforced aluminum panels
• Textured matte black finish on all surfaces
• EPDM rubber perimeter seals for superior weather resistance
• Folds against the cab for 100% bed access with protective bumpers
• Integrated water drainage system with precision-engineered rails
• Simple, one-person installation with all-new click-in design
• Assembled in the USA and backed by a 5-year warranty

Fits select 2015-2024 Chevrolet Colorado and GMC Canyon models with a 5ft bed.

The BAKFlip MX4 (GEN 3) is a heavy-duty hard folding tonneau cover designed to provide maximum security and utility without sacrificing style. This third-generation upgrade features reinforced high-density polymer cores within heavy-duty aluminum top panels, resulting in a 22% increase in strength over previous models. The flush-mount design sits level with your bed rails for a clean, aerodynamic profile, finished in a premium textured matte black that resists UV damage and scratches.

Security is handled by BAK's patented auto-latching system and re-engineered lock components for superior resistance to forced entry. For weather protection, the MX4 utilizes revised EPDM rubber perimeter seals and a 13% longer dual-action tailgate seal that allows you to close the tailgate regardless of the cover's position. When you need full bed access, the panels fold up against the cab, secured by prop rods to keep your cargo space clear.

• Part Number: 448126
• Construction: Aluminum panels with high-density polymer cores
• Load Rating: 400 lbs. (evenly distributed)
• Finish: Textured matte black
• Installation: Clamp-on design with no drilling required
• Accessibility: Folds against the cab for 100% bed access
• Features: Dual-action tailgate seal and integrated water drainage system
• Origin: Assembled in Missouri
• Warranty: 5-year manufacturer warranty

Fits 2014-2020 Chevrolet Silverado and GMC Sierra 1500, 2500 HD, and 3500 HD models with an 8ft bed.

The BAKFlip MX4 Gen 3 represents the next evolution of the industry's most popular hard folding truck bed cover. Re-engineered for maximum durability and security, this low-profile cover features heavy-duty aluminum panels reinforced with high-density polymer cores, making it 22% stronger than previous models. The sleek, textured matte black finish is designed to resist UV damage and scratches while maintaining a flush fit with your pickup's bed rails.

Functionality is at the core of the MX4 design. It provides 100% bed access by folding upright against the cab, secured by re-engineered prop rod clips. Weather protection is significantly enhanced with revised EPDM rubber perimeter seals and a 13% longer dual-action tailgate seal that allows you to close the tailgate regardless of the cover's position. Installation is faster than ever thanks to a new click-in design, and the integrated water drainage system keeps your cargo dry in any conditions.

• Heavy-duty aluminum panels with high-density polymer cores (22% stronger than original MX4)
• Patented automatic latching system with re-engineered lock components for improved security
• Textured matte black finish across all surfaces for a premium look and feel
• 100% bed access with 3rd brake light visibility in all positions
• Enhanced weather protection with EPDM seals and 13% longer dual-action tailgate seal
• Load rating of 400 lbs. (evenly distributed)
• 12% quicker installation with click-in design and precision-fit clamps
• Assembled in the USA (Missouri)

• Brand: BAK
• Series: BAKFlip MX4 (Gen 3)
• Part Number: 448122
• Bed Length: 8 Feet
• Finish: Textured Matte Black
• Warranty: 5 Years

Fits 2014-2020 Chevrolet Silverado and GMC Sierra 1500, 2500 HD, and 3500 HD models with a 6' 6" bed (including 1500 LD and 1500 Limited).

The BAKFlip MX4 (Gen 3) is an evolution of the industry-leading hard folding tonneau cover, re-engineered for increased durability and security. Constructed with heavy-duty aluminum top panels reinforced by high-density polymer cores, the MX4 is 22% stronger than previous models. Its sleek, flush-mount design sits level with your truck's bed rails, finished in a scratch-resistant, textured matte black for a premium appearance.

• 400 lbs. weight capacity (evenly distributed)
• High-density polymer-reinforced aluminum panels for maximum impact resistance
• Re-engineered automatic latching system for improved security against forced entry
• Revised EPDM rubber perimeter seals and tight-fit clamps for superior weather protection
• Extra-long dual-action tailgate seal allows for tailgate operation whether the cover is open or closed
• Folds 100% open against the cab with protective rubber bumpers and secure prop rods
• Integrated water drainage system channels moisture away from the bed
• Simple no-drill installation with all-new click-in rail design
• Manufacturer Part Number: 448121
• Assembled in the USA with a 5-year warranty

Fits select 2014-2020 Chevrolet Silverado 1500 and GMC Sierra 1500 with a 5ft 8in bed.

The BAKFlip MX4 (Gen 3) is a heavy-duty hard folding tonneau cover designed to blend high-end aesthetics with rugged utility. Featuring heavy-duty aluminum top panels reinforced with high-density polymer cores, this third-generation upgrade is 22% stronger than the original model. The sleek, low-profile design sits flush with your truck's bed rails, while the textured matte black finish provides superior scratch and UV resistance.

This cover is engineered for convenience and security. The patented auto-latching system allows you to secure the bed simply by closing the panels. For full bed access, the MX4 folds completely forward against the cab, secured by re-engineered prop rod clips. Weather protection is handled by revised EPDM rubber perimeter seals and a 13% longer dual-action tailgate seal that allows you to operate the tailgate regardless of whether the cover is open or closed.

• Heavy-duty aluminum panels with high-density polymer cores for 400 lbs. weight capacity
• Flush-mount, low-profile design with premium textured matte black finish
• Re-engineered automatic latching system for enhanced security
• 13% longer dual-action tailgate seal and EPDM rubber seals for weather protection
• Integrated water drainage system and prop rod storage clips
• 5-year manufacturer warranty
• Manufacturer Part Number: 448120
• Assembled in the USA

Fits 1988-2014 Chevrolet Silverado and GMC Sierra 1500, 2500, and 3500 HD models with a 6' 6" bed.

The BAKFlip MX4 (Gen 3) is the next evolution of the industry's most popular hard folding tonneau cover. Engineered with heavy-duty aluminum top panels reinforced by high-density polymer cores, this third-generation upgrade provides a 22 percent increase in overall panel strength compared to previous models. The MX4 sits flush with your truck's bed rails, offering a sleek, low-profile appearance while maintaining a robust 400-pound weight capacity.

For superior weather protection, the MX4 features revised EPDM rubber perimeter seals and tight-fit clamps designed to minimize water intrusion. The updated dual-action tailgate seal is 13 percent longer than previous iterations, allowing the tailgate to be closed with the cover either open or shut. Security is handled by a re-engineered automatic latching system that secures each panel as it is closed, while upgraded lock components provide enhanced resistance to forced entry.

• Premium textured matte black finish on all surfaces
• Heavy-duty aluminum construction with high-density polymer cores
• Supports up to 400 lbs. of evenly distributed weight
• Folds against the cab for 100% bed access with updated prop rod clips
• Revised EPDM rubber perimeter seals for superior weather resistance
• Dual-action tailgate seal enables factory tailgate operation in any position
• Simple, one-person installation with a new click-in design
• Assembled in Missouri, USA
• Manufacturer Part Number: 448101
• 5-year warranty

The best-selling truck bed cover in the world just got better.Introducing the new and improved RealTruck BAKFlip® MX4 (GEN 3)—an evolution of RealTruck's most popular tonneau cover. This next-generation upgrade builds on everything truck owners already love about MX4, now enhanced with improved functionality, greater durability, and elevated security.The new and improved BAKFlip MX4 is constructed primarily from alloy materials, including heavy-duty aluminum top panels and side rails. Reinforced with high-density polymer cores, each panel delivers a 22 percent increase in overall strength compared to the original model.Security is also enhanced. In addition to BAK's patented auto-latching system, which automatically secures the cover when closed, the BAKFlip MX4 (GEN 3) features re-engineered lock components for improved resistance to forced entry compared to the GEN 2. No matter the cargo you're transporting, you can rest assured knowing your gear's protected.When the weather turns, the BAKFlip MX4 (GEN 3) holds strong. Revised EPDM rubber perimeter seals and tight-fit clamps provide our best seal yet, preventing seepage between the bed cover and bed rails. At the rear of the cover, a 13 percent longer dual-action tailgate seal provides weather protection for the tailgate. This innovative design also improves operation, maintaining factory tailgate functionality regardless of the cover's position.The BAKFlip MX4 isn't only durable, it's also sleek and stylish. Unlike competitors, the BAKFlip MX4 sits flush with your pickup's bed rails, practically disappearing into your truck's profile. And with a sleek, textured matte black finish across all surfaces, the MX4 looks great whether open or closed.

• High-density polymer-reinforced aluminum top panels are 22 percent stronger than the original MX4
• Re-engineered automatic latching panels offer improved security over the GEN 2 design
• Re-engineered perimeter seals and tight-fit clamps for superior weather protection
• Premium rubber bumpers protect the cab when folded into the upright position
• Extra-long, dual-action tailgate seal available on most applications
• Extra Long Dual Action Tailgate Seal Available On Most Applications
• 12 percent quicker installation with all-new click-in design
• 12 Percent Quicker Installation With All New Click In Design
• Comprehensive 3rd brake light visibility in all positions
• Striking textured black finish across all components
• Precision-engineered aluminum side rails and frame
• Precision Engineered Aluminum Side Rails And Frame
• Folds against the cab for 100 percent bed access
• Re-engineered prop rod clips for a secure hold
• Re Engineered Prop Rod Clips For A Secure Hold
• 400 lbs. weight capacity (evenly distributed)
• Integrated Water Drainage System
• Simple one-person installation
• 400 Lbs Weight Capacity
• Assembled in Missouri
• 5-year warranty
• 5 Year Warranty

This Part Fits:

Fits 2017-2026 Ford F-250 and F-350 Super Duty models equipped with an 8ft bed.

The BAK Revolver X2 offers the convenience of a soft roll-up cover combined with the structural integrity of a hard tonneau. This hybrid design features patented interlocking aluminum slats topped with heavy-duty DualShield vinyl, providing a weather-resistant surface that supports up to 400 lbs. of evenly distributed cargo. Engineered for security, the Revolver X2 utilizes rotational locking rails that secure the entire length of the bed, defending against prying and forced entry without the need for hook-and-loop fasteners.

• Maximum Security: Features patented rotational locking rails and automatic slam latches that lock the cover at the tailgate for Level-3 security.
• Low-Profile Aesthetics: Designed to sit nearly flush with the truck bed rails for a clean, aerodynamic appearance.
• Full Bed Utility: PrecisionRoll technology allows the cover to roll tightly against the cab, providing 100% bed access and maintaining rear-view mirror visibility.
• Simple Installation: The clamp-on mounting system requires no drilling and can be installed with basic hand tools in approximately one hour.

• Material: Aluminum slats with textured DualShield vinyl
• Weight Capacity: 400 lbs. (evenly distributed)
• Installation: No-drill clamp-on
• Bed Length: 8 feet
• Warranty: 3-year limited warranty
• Manufacturer Part Number: 39331
• Made in the USA with global materials

Fits select 2017-2026 Ford F-250 and F-350 Super Duty trucks with a 6' 9" bed, including King Ranch, Lariat, Limited, Platinum, XL, and XLT trims.

The BAK Revolver X2 combines the security of a hard tonneau cover with the simple operation of a soft roll-up. Constructed with patented interlocking aluminum slats and topped with RealTruck's exclusive DualShield 60-grade vinyl, this cover provides Level-3 security and slash protection while maintaining a soft-to-the-touch, textured finish. The low-profile design sits nearly flush with the bed rails, optimizing both aerodynamics and vehicle aesthetics.

For maximum security, the Revolver X2 features patented rotational locking rails that secure the full length of the bed and automatic slam latches that can be operated from either side. When open, the PrecisionRoll technology allows for 100% bed access without obstructing the rear window or camera. The heavy-duty aluminum construction supports up to 400 lbs. of evenly distributed cargo and remains compatible with BAKBox2 and most 5th-wheel hitches.

• Material: Aluminum-reinforced DualShield vinyl over heavy-duty aluminum slats
• Security: Patented rotational locking rails and Level-3 slash resistance
• Load Rating: 400 lbs. (evenly distributed)
• Installation: Clamp-on, no-drill system (estimated 1-hour install)
• MPN: 39330
• Warranty: Limited 3-year warranty
• Origin: Made in the USA with global materials

Fits 2023-2026 Chevrolet Colorado (LT, Trail Boss, WT, Z71, ZR2) and GMC Canyon (AT4, AT4X, Denali, Elevation) with the 5ft 2in bed.

The BAK Revolver X2 (MPN: 39146) provides the sleek, low-profile appearance of a soft rolling tonneau cover with the structural security of a hard-shell design. Engineered for truck owners who require 100% bed access without sacrificing cargo protection, the Revolver X2 features a series of patented interlocking aluminum slats capable of supporting up to 400 lbs of evenly distributed weight.

Security is managed by patented rotational locking rails that secure the full length of the bed and automatic slam latches that engage with the tailgate. The cover is finished with a textured DualShield 60-grade vinyl top layer for superior moisture resistance and a clean look that sits nearly flush with the bed rails. Installation is straightforward using a clamp-on system that requires no drilling, typically completed in under an hour.

• Patented interlocking aluminum slats with 400-lb capacity
• Automatic slam latches operate from either side for quick access
• PrecisionRoll technology ensures 100% bed access and full rear window visibility
• Weather-resistant bulkhead and side rail seals with flush-fitting design
• Compatible with BAKBox2 and most 5th-wheel hitches
• Drill-free, clamp-on mounting system
• Made in the USA with a limited 3-year warranty

Fits select 2020-2026 Chevrolet Silverado 2500/3500 HD and GMC Sierra 2500/3500 HD models with a 6' 9" bed.

The BAK Revolver X2 (MPN 39133) provides the sleek, low-profile look of a soft roll-up cover with the heavy-duty security of a hard-shell tonneau. Engineered with patented interlocking aluminum slats topped with DualShield 60-grade vinyl, this cover supports up to 400 lbs of evenly distributed weight while providing Level-3 security against theft. The PrecisionRoll technology allows for easy one-handed operation, rolling tight to the bulkhead for 100% bed access without obstructing your rearview mirror or third brake light.

• Construction: Heavy-duty interlocking aluminum slats with textured DualShield vinyl overlay
• Security: Patented rotational locking rails and automatic slam latches protect against prying
• Weight Capacity: Supports up to 400 lbs of evenly distributed cargo
• Profile: Ultra-low profile design sits nearly flush with the truck bed rails
• Installation: Simple clamp-on mounting system requires no drilling and takes less than an hour
• Compatibility: Works with most 5th-wheel hitches and the BAKBox2 storage system
• Manufacturing: Made in the USA with global materials
• Warranty: Limited 3-year manufacturer warranty

Fits select 2019-2026 Chevrolet Silverado 1500 and GMC Sierra 1500 models equipped with the 5' 8" short bed.

The BAK Revolver X2 (MPN 39130) provides the security of a hard-shell tonneau cover with the effortless operation of a soft roll-up. Designed with a core of patented interlocking aluminum slats topped with heavy-duty DualShield vinyl, this cover offers Level-3 security to protect your gear from prying and slashing. When closed, the rotational locking rails secure the full length of the bed, while the automatic slam latches allow you to lock the cover from either side of the tailgate.

This low-profile cover sits nearly flush with your bed rails, improving aerodynamics and aesthetics without sacrificing utility. For full bed access, simply roll the cover toward the cab; it secures with integrated straps, allowing you to drive with the cover open while maintaining full rear-window visibility. The no-drill, clamp-on installation typically takes under an hour using basic hand tools.

• Load Capacity: 400 lbs. (evenly distributed)
• Construction: Aluminum-reinforced slats with textured DualShield vinyl
• Locking System: Patented rotational locking rails and automatic slam latches
• Installation: Easy clamp-on mounting; no drilling required
• Accessibility: Provides 100% bed access and maintains stake pocket visibility
• Compatibility: Works with most 5th-wheel hitches and BAKBox2 accessories
• Warranty: 3-Year Limited Warranty
• Manufacturer Part Number: 39130

Fits 2022-2026 Nissan Frontier models (S, SV, PRO-X, PRO-4X, SL) equipped with a 5ft bed.

The BAK BAKFlip G2 is the original hard folding truck bed cover designed for maximum security and utility. Built with aircraft-grade aluminum skins over durable solid-core panels, the G2 offers a low-profile, flush-mount design that protects your cargo without compromising your truck's lines. The semi-gloss black powder coat finish is UV-resistant and meeting ISO quality benchmarks for long-term durability against fading and corrosion.

Operation is seamless with a patented rail and clamp system featuring automatic slam latches that lock each panel as you close the cover. For full bed access, the G2 folds forward against the cab, where integrated struts hold it securely for safe driving at highway speeds. This design ensures you can haul oversized cargo without removing the cover, providing 100% bed access whenever needed.

• Solid Construction: High-density solid-core panels with aircraft-grade aluminum skins support up to 300 lbs of evenly distributed weight.
• Weather Defense: Premium EPDM rubber perimeter seals and integrated drainage tubes channel water away from the bed to keep cargo dry.
• Secure Locking: Automatic slam latches secure the panels to the side rails; the cover locks automatically when the tailgate is closed.
• No-Drill Install: Simple clamp-on mounting system allows for a hassle-free installation with no drilling required.
• Storage Compatible: Designed to work with the BAKBox2 storage system for added organization.

• Manufacturer Part Number: 226538
• Load Rating: 300 lbs (Evenly Distributed)
• Finish: Semi-Gloss Black Powder Coat
• Warranty: 3-Year Warranty
• Installation: Clamp-on, No-Drill

Fits 2024-2026 Toyota Tacoma (5ft Bed) including SR, SR5, Limited, TRD Sport, TRD Off-Road, TRD Pro, and Trailhunter models.

The BAKFlip G2 (MPN: 226446) is a versatile hard folding truck bed cover engineered for durability and full bed utility. Constructed with solid core panels and premium aluminum skins, this cover provides maximum theft protection by securing your cargo behind a locked tailgate. The integrated buckle system allows for safe driving with the cover in the closed, folded, or flipped-up position, ensuring you have 100% bed access when your haul requires it.

Built to withstand the elements, the G2 features premium UV resistance to prevent fading or chalking and a weather-resistant design to keep your gear dry. The simple clamp-on installation requires no drilling, and the low-profile design maintains third brake light visibility on short and standard bed configurations. It is also fully compatible with the BAKBox2 cargo management system.

• Durable solid core panels with aluminum skins for impact resistance
• Weight rated up to 300 lbs of evenly distributed weight
• Automatic latching panels for quick security
• Patented latch system concealed under the cover for theft prevention
• Simple clamp-on installation with no drilling required
• Premium UV resistance to maintain finish
• 3-Year Manufacturer Warranty

Fits 2022-2026 Toyota Tundra 5.5-foot beds across all trim levels, including SR, SR5, Limited, Platinum, 1794 Edition, TRD Pro, and Capstone.

The BAK BAKFlip G2 is the original hard folding truck bed cover, engineered to provide maximum security and all-season durability without sacrificing utility. This cover features a low-profile design that sits flush with your bed rails, constructed from solid-core panels with aircraft-grade aluminum skins. The semi-gloss black powder coat finish is corrosion-resistant and provides premium UV resistance to prevent fading or chalking over time.

When you need full bed access, the G2 folds forward against the cab, secured by integrated struts for a rattle-free ride at highway speeds. The patented rail and clamp system pairs with automatic slam latches to lock the cover in place as you close each panel, securing your gear when the tailgate is locked. Installation is straightforward with a no-drill, clamp-on mounting system.

• Aircraft-grade aluminum construction with durable solid-core panels
• 300 lbs. weight capacity (evenly distributed)
• EPDM rubber perimeter seals and integrated water drainage system
• 100% bed access when folded and secured against the cab
• Automatic slam latches lock each panel as it closes
• Compatible with the BAKBox2 storage system
• No-drill, clamp-on installation for a precise fit
• Manufacturer Part Number: 226440
• Proudly assembled in the USA with a 3-year warranty

Fits 2016-2023 Toyota Tacoma models with a 5ft bed. Includes Limited, SR, SR5, Trail, and TRD (Sport/Off-Road/Pro) trims.

The BAKFlip G2 is the original hard folding truck bed cover designed for owners who need a balance of security, strength, and full bed utility. Built with solid-core panels surfaced with aircraft-grade aluminum skins, the G2 provides a durable barrier against theft and the elements while maintaining a sleek, low-profile appearance. The semi-gloss black powder coat finish is UV-resistant and meets ISO quality benchmarks to prevent fading and chipping over time.

When you need to haul oversized cargo, the G2 folds completely forward to the cab, providing 100% bed access without removing the cover. Integrated struts secure the panels in the upright position for safe driving at highway speeds. Security is managed by a patented rail and clamp system featuring automatic slam latches that lock the cover to the side rails whenever it is closed. The system works in tandem with your factory tailgate lock for a fully secure cargo area.

• Construction: Aircraft-grade aluminum skins over durable solid-core panels
• Load Rating: Supports up to 300 lbs. of evenly distributed weight
• Weather Protection: Precision-fit EPDM rubber perimeter seals and integrated water drainage channels
• Installation: Hassle-free, no-drill clamp-on mounting system
• Finish: Corrosion-resistant semi-gloss black powder coat
• Access: 100% bed access with panels secured against the cab
• Manufacturer Part Number: 226426
• Warranty: 3-Year manufacturer warranty

Fits select 2007-2023 Toyota Tundra models with a 5ft 6in bed.

Protect your cargo with the original hard-folding truck bed cover: the BAKFlip G2. Engineered for durability and a sleek, low-profile appearance, the G2 features solid-core panels with aircraft-grade aluminum skins. This construction provides a 300 lb. weight capacity (evenly distributed) while maintaining a lightweight profile that won't strain your tailgate.

The G2 is designed for maximum utility, offering 100% bed access. Simply fold the panels toward the cab and secure them with the integrated struts for safe driving with the cover fully open. For security, the patented rail and clamp system works with automatic slam latches to lock the cover as it closes, keeping your gear hidden and protected when the tailgate is locked. Installation is straightforward and requires no drilling, utilizing a clamp-on mounting system that preserves your truck bed's integrity.

• Manufacturer Part Number: 226409
• Durable aircraft-grade aluminum skins with a corrosion-resistant semi-gloss black powder coat
• 300 lb. weight capacity (evenly distributed)
• Full bed access with integrated struts for secure open-position driving
• Premium EPDM rubber perimeter seals and integrated water drainage system
• Automatic slam latches for intuitive security
• Compatible with the BAKBox2 storage system
• No-drill, clamp-on installation
• Proudly assembled in Missouri with a 3-year warranty

Fits 2005-2015 Toyota Tacoma Base, Pre Runner, and TRD Pro models equipped with a 5ft bed.

Protect your gear with the original hard-folding tonneau cover that defines the category: the BAK BAKFlip G2. This heavy-duty cover is engineered with solid-core panels skinned in aircraft-grade aluminum and finished with a semi-gloss black powder coat for superior corrosion resistance and UV protection. Capable of supporting up to 300 lbs. of evenly distributed weight, the G2 provides a secure, low-profile barrier against the elements and theft.

The BAKFlip G2 is designed for maximum utility, offering 100% truck bed access when fully folded against the cab. Integrated struts secure the panels for safe driving at highway speeds, while the patented rail and clamp system ensures a precise, no-drill installation. For security, automatic slam latches lock the panels as you close them, keeping your valuables hidden and safe when the tailgate is locked.

• Manufacturer Part Number: 226406
• Aircraft-grade aluminum skins with durable solid-core panels
• 300 lbs. weight capacity (evenly distributed)
• Premium EPDM rubber perimeter seals and integrated water drainage system
• Automatic slam latches and patented rail/clamp mounting system
• No-drill, clamp-on installation for a clean finish
• Maintains third brake light visibility on short and standard beds
• Assembled in the USA and backed by a 3-year warranty
• Compatible with BAKBox2 storage systems

Fits 2004-2006 Toyota Tundra Limited and SR5 models with the Double Cab and 6ft 2in bed.

The BAKFlip G2 is the original hard-folding truck bed cover designed to provide maximum security without sacrificing utility. Engineered with durable solid-core panels and aircraft-grade aluminum skins, the G2 (MPN 226405) offers a 300-lb weight capacity and a low-profile aesthetic that sits flush with your Tundra's bed rails. The semi-gloss black powder coat finish is UV-resistant and earns ISO quality benchmarks for resisting fading, chipping, and corrosion.

Functionality is at the core of the G2 design. When you need to haul oversized cargo, the panels fold forward to the cab, providing 100% bed access. Integrated struts hold the cover securely in place for a rattle-free ride at highway speeds. Security is handled by a patented rail and clamp system featuring automatic slam latches that lock each panel as it closes, keeping your gear protected behind your locking tailgate.

• Durable Construction: Solid-core panels with aircraft-grade aluminum skins for all-season strength.
• Complete Bed Access: Folds forward to the cab for full hauling capacity without removing the cover.
• Weather Protection: Premium EPDM rubber perimeter seals and integrated drainage channels divert water away from the bed.
• No-Drill Installation: Simple clamp-on mounting system requires only basic hand tools.
• Specifications: 300 lbs weight capacity (evenly distributed), compatible with BAKBox2.

• Manufacturer Part Number: 226405
• Finish: Semi-Gloss Black Powder Coat
• Warranty: 3-Year Limited
• Assembly: Proudly Assembled in Missouri, USA

Fits select 2021-2025 Ford F-150 and 2022-2025 Ford F-150 Lightning models with a 5.7ft bed. This includes XL, XLT, Lariat, King Ranch, Platinum, Limited, Raptor, Tremor, and Lightning (Pro, Flash) trims.

The BAK BAKFlip G2 (MPN: 226339) is the industry-standard hard folding truck bed cover, engineered to provide a balance of security, durability, and full bed utility. Constructed with solid-core panels protected by aircraft-grade aluminum skins, the G2 offers a robust 300-pound weight capacity (evenly distributed) while maintaining a sleek, low-profile appearance. The semi-gloss black powder coat finish is UV-resistant to prevent fading and chalking, while ISO-certified manufacturing ensures long-lasting component quality.

Security is managed via a patented rail and clamp system combined with automatic slam latches, allowing you to lock your cargo away simply by closing the cover and the tailgate. For oversized hauling, the G2 provides 100% bed access; the panels fold forward to the cab and are held securely by integrated struts for safe driving at highway speeds. Installation is straightforward with a no-drill, clamp-on design that requires only basic hand tools.

• Durable solid-core panels with aircraft-grade aluminum skins
• Weather-resistant EPDM rubber perimeter seals and rounded hinges
• Integrated water drainage system to channel moisture away from the bed
• 300 lbs. weight capacity (evenly distributed)
• Automatic slam latches for secure, one-handed operation
• Compatible with the BAKBox2 storage system
• Proudly assembled in Missouri
• 3-Year Limited Warranty

Fits 2021-2025 Ford F-150 King Ranch, Lariat, Platinum, SSV, STX, XL, and XLT models with a 6.5ft bed.

Protect your cargo with the original hard-folding truck bed cover that set the industry standard: the BAKFlip G2. Engineered for maximum security and all-season performance, the G2 features a low-profile design that sits flush with your truck bed rails. Constructed with solid-core panels and aircraft-grade aluminum skins, this cover provides a 300 lb. weight capacity (evenly distributed) while remaining lightweight enough for easy operation.

The BAKFlip G2 is designed for utility, offering 100% bed access when folded forward against the cab. Integrated struts and a patented rail and clamp system ensure the cover remains secure and rattle-free even at highway speeds. For security, the automatic slam latch system locks each panel as it is closed, keeping your gear hidden and protected once the tailgate is locked. Installation is straightforward with a no-drill, clamp-on mounting system that requires only basic hand tools.

• Manufacturer Part Number: 226337
• Aircraft-grade aluminum construction with solid-core panels
• Corrosion-resistant semi-gloss black powder coat finish
• 300 lbs. weight capacity (evenly distributed)
• Premium EPDM rubber perimeter seals and integrated water drainage system
• Intuitive automatic slam latches for enhanced security
• Full bed access with integrated struts to secure the cover against the cab
• Compatible with the BAKBox2 storage system
• Proudly assembled in Missouri with a 3-year warranty

Fits select 2017-2026 Ford F-250 and F-350 Super Duty models with an 8-foot bed (King Ranch, Lariat, Limited, Platinum, XL, XLT).

The RealTruck BAKFlip G2 is the original hard folding tonneau cover that defines durability and functionality. Built with solid-core panels and aircraft-grade aluminum skins, this cover provides a 300-pound weight capacity (evenly distributed) while maintaining a sleek, low-profile appearance. The panels are finished in a corrosion-resistant, semi-gloss black powder coat that resists UV fading, chipping, and flaking, meeting ISO quality standards for long-term exterior use.

Engineered for maximum utility, the G2 offers 100% bed access. Simply fold the panels forward toward the cab and secure them with the integrated struts for a vibration-free ride when hauling oversized cargo. For security, the patented rail and clamp system uses automatic slam latches that lock the cover whenever it is closed, securing your gear once the tailgate is locked.

• Aircraft-grade aluminum skins with durable solid-core panels
• 300 lb. evenly distributed weight capacity
• Premium EPDM rubber perimeter seals for superior weather resistance
• Intuitive automatic slam latches for secure, one-handed operation
• Integrated water drainage system to keep the bed dry
• Simple, no-drill, clamp-on installation
• Compatible with BAKBox2 storage systems
• Proudly assembled in Missouri, USA
• Manufacturer Part Number: 226331

Fits 2017-2026 Ford F-250 and F-350 Super Duty models with a 6' 9" bed.

Protect your cargo with the BAKFlip G2, the original hard-folding truck bed cover that established the industry standard for durability and utility. Engineered with solid-core panels and aircraft-grade aluminum skins, the G2 provides a secure, low-profile solution that withstands heavy use while maintaining a sleek appearance. The semi-gloss black powder coat finish is corrosion-resistant and UV-protected to prevent fading, chipping, and flaking over the life of the vehicle.

The BAKFlip G2 is designed for maximum versatility, offering 100% bed access when needed. Simply fold the panels toward the cab and secure them with the integrated struts to haul oversized items without removing the cover. For security, the patented rail and clamp system utilizes automatic slam latches that lock each panel as it closes. When paired with your locking tailgate, the bed becomes a secure vault for your tools and equipment.

Weather protection is handled by a comprehensive system of EPDM rubber perimeter seals and an integrated water drainage system that channels runoff away from the bed. Installation is straightforward with a no-drill, clamp-on mounting system that requires only basic hand tools.

• Fits 6' 9" truck beds
• Construction: Aircraft-grade aluminum skins with solid-core panels
• Finish: UV-resistant semi-gloss black powder coat
• Load Rating: 300 lbs. (evenly distributed)
• Full bed access with integrated upright storage struts
• Automatic slam latches for quick security
• Weather-resistant EPDM rubber seals and drainage channels
• Compatible with BAKBox2 toolboxes
• ISO-certified quality standards
• Proudly assembled in Missouri, USA
• Manufacturer Part Number: 226330
• Warranty: 3-Year Limited Warranty

Fits select 2015-2020 Ford F-150 models with a 5ft 6in bed.

Protect your cargo with the original hard-folding truck bed cover that defined the category: the BAKFlip G2. Engineered for maximum security and all-season performance, the G2 features a low-profile design that sits flush with your truck's bed rails. The solid-core panels are constructed with aircraft-grade aluminum skins and finished in a corrosion-resistant, semi-gloss black powder coat that resists fading and UV damage.

The BAKFlip G2 is designed for versatility, offering 100% bed access when needed. Simply fold the panels forward toward the cab and secure them with the integrated struts to haul oversized items safely at highway speeds. For security, the patented rail and clamp system works with automatic slam latches, locking the cover automatically as you close it. When your tailgate is locked, your cargo is fully secured.

• Manufacturer Part Number: 226329
• Material: Aircraft-grade aluminum skins over solid-core panels
• Finish: UV-resistant semi-gloss black powder coat
• Load Rating: 300 lbs. (evenly distributed)
• Installation: No-drill, clamp-on mounting system
• Weather Protection: EPDM rubber perimeter seals and integrated drainage system
• Accessibility: Full bed access with integrated cab-protection struts
• Compatibility: Works with BAKBox2 storage systems
• Warranty: 3-year limited warranty

Fits 2022-2026 Ford Maverick Lariat, Lobo, Tremor, XL, and XLT (4.5ft Bed).

Protect your cargo with the industry-standard hard folding cover: the BAK BAKFlip G2. Engineered for heavy-duty security and all-season utility, the G2 features a low-profile design that sits flush with your bed rails. Constructed with durable, solid-core panels and aircraft-grade aluminum skins, this cover provides a 300 lb. evenly distributed weight capacity while remaining lightweight enough for easy operation.

The semi-gloss black powder coat finish is corrosion-resistant and UV-treated to prevent fading, chipping, or chalking. For maximum utility, the G2 offers 100% bed access; simply fold the panels toward the cab and secure them with the integrated struts to haul oversized loads safely at highway speeds. Security is handled by a patented rail and clamp system with automatic slam latches that lock the panels as you close them, securing your gear when the tailgate is locked.

• Aircraft-grade aluminum construction with solid-core panels
• 300 lbs. weight capacity (evenly distributed)
• 100% truck bed access with integrated support struts
• Weather-resistant EPDM rubber perimeter seals and integrated drainage system
• No-drill, clamp-on installation for a precise fit
• Automatic slam latches for secure, one-handed operation
• Compatible with BAKBox2 storage solutions
• Proudly assembled in Missouri; includes 3-year warranty
• Manufacturer Part Number: 226324

Fits select 2008-2016 Ford F-250 and F-350 Super Duty models with an 8-foot bed.

The BAK BAKFlip G2 (MPN: 226311) is the original hard-folding tonneau cover designed to balance security, durability, and full bed utility. Constructed with aircraft-grade aluminum skins over durable solid-core panels, the G2 provides a 300-pound weight capacity (evenly distributed) while maintaining a low-profile aesthetic. The semi-gloss black powder coat finish is UV-resistant and meets ISO quality benchmarks for resistance against fading, chipping, and corrosion.

Engineered for maximum versatility, the G2 allows for driving in the closed, folded, or flipped-up position. When fully opened, integrated struts secure the panels against the cab for 100% bed access without the need to remove the cover. For weather protection, the system utilizes premium EPDM rubber perimeter seals, rounded hinges, and an integrated water drainage system to channel moisture away from your cargo.

Security is managed via a patented rail and clamp system featuring automatic slam latches that lock each panel as they are closed. Installation is a straightforward bolt-on process using a no-drill, clamp-on mounting system that preserves the integrity of your factory bed rails.

• Aircraft-grade aluminum skins with solid-core panels
• 300 lb. weight capacity (evenly distributed)
• UV-resistant semi-gloss black powder coat finish
• Premium EPDM rubber perimeter seals and integrated drainage system
• Automatic slam latches for hands-free locking
• Full bed access with integrated struts for secure driving
• No-drill, clamp-on installation
• Compatible with BAKBox2 storage systems
• Assembled in the USA and backed by a 3-year warranty

Fits select 2004-2014 Ford F-150 and 2006-2008 Lincoln Mark LT with a 5' 6" bed.

Protect your cargo with the original hard-folding truck bed cover that set the industry standard: the BAK BAKFlip G2. Built for strength and security, the G2 features solid-core panels with aircraft-grade aluminum skins that provide a 300 lb. weight capacity (evenly distributed) without adding excessive weight to your truck. The semi-gloss black powder coat finish is corrosion-resistant and engineered to resist fading, chipping, and flaking even under heavy UV exposure.

The BAKFlip G2 offers 100% truck bed access when you need it. Simply fold the panels forward to the cab and secure them with the integrated struts for a stable, rattle-free ride at highway speeds. For security, the patented rail and clamp system works with automatic slam latches to lock each panel individually. When your tailgate is locked, your gear is completely hidden and secure.

Installation is straightforward with a no-drill, clamp-on mounting system. Weather protection is handled by premium EPDM rubber perimeter seals and an integrated drainage system that channels water away from your cargo, ensuring all-weather performance in the toughest conditions.

• Manufacturer Part Number: 226309
• Load Rating: 300 lbs. (evenly distributed)
• Construction: Aircraft-grade aluminum skins with solid core
• Finish: UV-resistant semi-gloss black powder coat
• Mounting: No-drill, clamp-on installation
• Access: Full bed access with integrated cab struts
• Compatibility: Works with BAKBox2 storage systems
• Warranty: 3-Year Limited Warranty
• Origin: Proudly assembled in Missouri, USA

Fits 1999-2007 Ford F-250 and F-350 Super Duty models equipped with an 8-foot long bed. This BAKFlip G2 hard folding tonneau cover (MPN 226304) provides heavy-duty security and all-weather protection without sacrificing full bed utility.

The BAKFlip G2 is engineered with solid-core panels surfaced with aircraft-grade aluminum skins for a high strength-to-weight ratio. The exterior is finished in a semi-gloss black powder coat that is UV-resistant and ISO-certified to resist chipping and fading. The patented rail system includes automatic slam latches, allowing you to secure the cover simply by closing the panels; it locks in conjunction with your factory tailgate for a complete cargo security solution.

When you need to haul oversized gear, the G2 folds completely forward against the cab. Integrated struts hold the cover securely in place, allowing for highway-speed driving with 100% bed access. The installation is straightforward with a no-drill, clamp-on mounting system that preserves the integrity of your truck bed.

• Durable aircraft-grade aluminum skins with solid core panels
• 300 lbs. weight capacity (evenly distributed)
• Integrated water drainage system with EPDM rubber perimeter seals
• Semi-gloss black powder coat finish for corrosion resistance
• No-drill, clamp-on installation for a precise fit
• Compatible with BAKBox2 toolboxes
• Assembled in the USA and backed by a 3-year warranty

Fits 2019-2026 Ram 1500 models equipped with a 5' 7" bed and the RamBox Cargo Management System.

The BAK BAKFlip G2 is the industry-standard hard folding truck bed cover, engineered for owners who require a balance of security, durability, and a clean, low-profile aesthetic. Constructed from aircraft-grade aluminum skins over solid-core panels, the G2 provides a 300-pound weight capacity (evenly distributed) while remaining light enough for effortless operation. The semi-gloss black powder coat finish is UV-resistant and meets ISO quality benchmarks to resist chipping, fading, and corrosion in all-season conditions.

Functionality is central to the G2 design. The patented rail and clamp system allows for a straightforward, no-drill installation, while the automatic slam latches secure each panel as it closes. For full bed access, the panels fold forward and lock securely against the cab with integrated struts, allowing you to haul oversized items without removing the cover. Professional-grade weather protection is provided by a comprehensive system of EPDM rubber perimeter seals and integrated drainage channels that direct water away from the truck bed.

• Manufacturer Part Number: 226227RB
• Construction: Aircraft-grade aluminum panels with solid cores
• Finish: Corrosion-resistant semi-gloss black powder coat
• Capacity: 300 lbs (evenly distributed)
• Mounting: No-drill, clamp-on system
• Access: 100% bed access with panels secured at the cab
• Compatibility: Works with BAKBox2 toolboxes
• Warranty: 3-year limited warranty
• Origin: Proudly assembled in Missouri, USA