The Method Race Wheels Cap T080 (CP-T080K104) is a direct replacement snap-in center cap designed to provide a clean, finished look for your Method wheels. Engineered for durability and a precise fit, this cap protects the center hub and lug nut area from road grime and debris while maintaining the rugged aesthetic Method is known for.

• Series: Cap T080
• Part Number: CP-T080K104
• Diameter: 104mm
• Attachment Style: Snap-In
• Finish: Black

Designed for easy installation, this cap snaps directly into the wheel's center bore. Please verify your wheel model and bore size to ensure compatibility with the 104mm specification.

Maintain the clean look and hub protection of your Method Race Wheels with this authentic 1717-series replacement center cap. This 83mm cap (Part #CP-1717B89-S1) is engineered for a precise fit on wheels featuring an 83mm bore diameter, finished in a durable black coating to withstand harsh road conditions and off-road environments.

Designed as a push-thru component, this cap installs from the rear of the wheel center bore, providing a secure mechanical seat once the wheel is bolted to the hub. This ensures the cap remains firmly in place during high-vibration driving while effectively shielding the axle nut and hub assembly from dust, mud, and debris.

• Brand: Method Race Wheels
• Series: 1717
• Bore Diameter: 83mm
• Finish: Black
• Mounting Style: Push Thru
• Manufacturer Part Number: CP-1717B89-S1

Fits select 1980-2003 American Motors, Buick, Cadillac, Chevrolet, Chrysler, Dodge, and Ford vehicles (5.9L).

Standard lug nuts often fail under the stress of overzealous impact guns, road salt, and corrosive wheel cleaners. McGard Tough Nuts are engineered to withstand the real-world punishment of daily driving while maintaining a premium appearance. Each nut is fully machined from restricted chemistry steel specifically manufactured for McGard and is through-hardened for maximum safety and structural integrity.

The 64029 series uses a sophisticated multi-layer plating process, combining several layers of nickel and microporous chrome with a black PVD finish. This provides a durable, superior finish that is guaranteed for life not to rust, chip, or peel. The Bulge Style Cone Seat provides an extended seating surface to properly secure aluminum wheels with wider seating requirements.

• Thread Size: 1/2-20
• Hex Size: 3/4 in.
• Overall Length: 1.45 in.
• Seat Style: Cone Seat (Bulge Style)
• Finish: Black PVD over Chrome
• Quantity: Set of 4
• Material: Through-hardened restricted chemistry steel
• Standards: Meets or exceeds O.E.M. safety and durability standards
• Origin: Manufactured in the USA
• Manufacturer Part Number: 64029

Fits select 1965-2014 Chevrolet, Dodge, Ford, and GMC models.

Protect your wheels and tires from theft with the McGard 24144 Wheel Lock Nut Set. These locks are engineered to function like standard lug nuts but require a unique, computer-generated key for installation and removal. Each lock is fully machined from restricted chemistry steel and through-hardened for maximum security and structural integrity. The extra-narrow pattern groove is designed to resist the intrusion of removal tools, ensuring only your unique key can access the hardware.

The black PVD finish is applied over layers of nickel and microporous chrome, providing superior corrosion resistance and a durable, sleek appearance. The included key tool features a steel collar that guides the key into the pattern and holds it in alignment for easier installation. This set is manufactured in the USA to meet or exceed OEM standards for safety and durability.

• Part Number: 24144
• Thread Size: 9/16-18
• Seat Style: Cone Seat Duplex
• Hex Size: 7/8 in.
• Overall Length: 2.5 in.
• Finish: Black PVD
• Material: Through-Hardened Steel
• Includes: 4 Wheel Locks and 1 Unique Key Tool

Fits select 1991-2020 Acura and Honda models, including Civic, Accord, NSX, S2000, and CR-V (5x114.3 bolt pattern).

H&R Trak+ DRM Series wheel adapters are engineered to widen your vehicle's track for improved lateral stability and a flush, aggressive stance. These 25mm spacers bolt directly to your factory hub using the existing studs, while the integrated 12x1.5 studs provide a secure mounting point for your wheels. Unlike generic spacers, these are hubcentric, featuring a full-contact hub design that ensures even load distribution and eliminates vibrations by mimicking the factory hub profile.

Manufactured in Germany, Trak+ spacers are crafted from a proprietary aluminum/magnesium alloy that offers higher tensile strength than standard 6061-T6 billet aluminum. This provides a significant weight reduction without compromising the structural integrity required for spirited driving or heavy daily use.

• Thickness: 25mm
• Bolt Pattern: 5/114.3
• Center Bore: 64.1mm
• Stud Thread: 12x1.5
• Finish: Black Anodized
• Series: Trak+ DRM
• MPN: 5065640SW

Fits select 1972-2020 Audi, Mercedes-Benz, Porsche, and Chrysler vehicles (including A4, C-Class, E-Class, S-Class, and Macan) with a 5/112 bolt pattern and 66.5mm center bore.

H&R Trak+ DR Series Wheel Spacers are engineered to move your wheels outward from the hub, effectively widening the vehicle track for improved lateral stability and a flush fender-to-wheel fitment. Unlike generic spacers, these are hubcentric and feature a full-contact hub face—mirroring the factory design—to ensure even load distribution and eliminate vibration at highway speeds.

Manufactured in Germany, these spacers are CNC-machined from a proprietary aluminum/magnesium alloy that offers higher tensile strength than standard 6061-T6 billet. This allows for a lighter, thinner profile without sacrificing the structural integrity required for spirited driving or heavy luxury sedans. The 20mm thickness provides a significant correction for high-offset wheels or for clearing larger brake calipers.

• Part Number: 4055665
• Series: Trak+ DR
• Spacer Thickness: 20mm
• Bolt Pattern: 5/112
• Center Bore: 66.5mm
• Thread Pitch: 12x1.5
• Material: High-strength proprietary light alloy
• Design: Hubcentric for precise fit and load distribution
• Origin: Made in Germany

Note: DR Series spacers require longer wheel bolts which are sold separately. Please verify your current bolt length before ordering to ensure correct engagement.

Fits select 1987-2015 Nissan and Infiniti models, including 240SX, 300ZX, 350Z, G35, G37, Maxima, and Q60.

H&R Trak+ Wheel Spacers are engineered to move your wheels outward from the hub, creating a wider track for improved handling and a flush, aggressive stance. Unlike generic spacers, the DRM Series features integrated wheel studs, allowing the spacer to bolt directly to your factory hub with the included hardware. This design is ideal for vehicles where the original studs are too short to accommodate a slip-on spacer.

Manufactured in Germany from a proprietary aluminum/magnesium alloy, these spacers offer higher tensile strength than standard 6061-T6 billet. Each spacer is hubcentric, featuring a full-contact hub-centric lip that mirrors the factory hub to ensure even load distribution, lateral support, and a vibration-free ride.

• Thickness: 15mm
• Bolt Pattern: 5/114.3 (5x4.5)
• Center Bore: 66.2mm
• Stud Thread: 12x1.25
• Series: Trak+ DRM Series
• Material: Proprietary High-Strength Light Alloy
• Manufacturer Part Number: 3065663

Fits select 2018-2020 Volkswagen Arteon, Jetta, and Tiguan models.

H&R Trak+ DR Series Wheel Spacers move your wheels outward to sit flush with the fender, instantly improving your vehicle's stance and lateral stability. These spacers are engineered from a proprietary lightweight aluminum/magnesium alloy that provides a higher tensile strength than standard 6061-T6 billet aluminum. Each spacer is hubcentric, featuring a full-contact hub design that ensures even load distribution and maintains precise wheel centering for a vibration-free ride.

• Thickness: 12mm
• Bolt Pattern: 5/112 (5x112)
• Center Bore: 57.1mm
• Bolt Thread: 14x1.5
• Series: DR Series
• Material: Proprietary High-Strength Alloy
• Manufactured in Germany
• Manufacturer Part Number: 2455577

Note: DR Series spacers require longer wheel bolts which are sold separately. Always verify the correct bolt seat type and length required for your specific wheel and spacer combination before installation.

Fits select 1994-2020 Audi, Chrysler, and Mercedes-Benz vehicles including S8, Crossfire, and various C-Class, E-Class, S-Class, and GLE-Class models.

H&R Trak+ DR Series Wheel Spacers broaden your vehicle's track to move wheels flush with the fenders, improving both lateral stability and visual stance. Engineered from a proprietary lightweight aluminum/magnesium alloy, these spacers offer a higher tensile strength than standard 6061-T6 billet aluminum. This ensures maximum durability under high-stress driving conditions while minimizing unsprung weight.

These hubcentric spacers feature a full-contact hub design, mirroring the factory hub to ensure even load distribution and precise lateral support. The DR Series is designed for a slip-on fit between the wheel and the hub, requiring the use of extended-length wheel bolts (sold separately) for a secure installation.

• Manufacturer Part Number: 2055665SW
• Thickness: 10mm
• Bolt Pattern: 5/112
• Center Bore: 66.5mm
• Hardware Thread: 12x1.5 (Vehicle Reference)
• Finish: Black Anodized
• Material: Proprietary High-Strength Alloy
• Series: Trak+ DR
• Country of Origin: Germany

The H&R Quick-Safe Wheel Bolt-to-Stud Conversion Kit (MPN 1457005) streamlines wheel changes by replacing cumbersome factory wheel bolts with high-strength wheel studs. Ideal for track applications and enthusiasts who frequently swap wheel sets, this conversion kit allows for faster, easier alignment and secure mounting.

• Specifications: M14 x 1.5 thread pitch and 70mm total length.
• Secure Installation: Each stud features a shouldered design for precise seating against the hub and an integrated hex key socket for straightforward installation.
• Ready to Install: Pre-treated with a specialized thread-locking compound to ensure a permanent, vibration-resistant bond to the hub.
• Durability: Finished in a corrosion-resistant silver coating to withstand environmental exposure and repeated use.
• Quality Engineering: Precision-manufactured in Germany to H&R's rigorous standards for fitment and material strength.

Ensure proper thread engagement and wheel security with this H&R specialty wheel bolt. This M14 x 1.5 hardware is engineered for vehicles requiring an R14 ball seat, a common specification for Audi applications. With an extended 50mm shank length, this bolt is designed for use when additional reach is required, such as when installing aftermarket wheel spacers to maintain safe hub-to-wheel connectivity.

• Thread Size: M14 x 1.5
• Shank Length: 50mm
• Seat Type: R14 Removable Ball Seat
• Hex Head: 17mm
• Finish: Corrosion-resistant Black
• Manufacturer Part Number: 1455007ASW

Each H&R bolt is manufactured to exacting tolerances from high-tensile strength materials to ensure durability under both street and performance driving conditions. The removable ball seat design allows for precise torque distribution and seating against the wheel surface.

H&R Wheel Studs are precision-engineered for secure wheel fitment, whether you are performing an OE replacement or installing wheel spacers that require extended hardware. Manufactured in Germany to exacting standards, these studs provide the high tensile strength and reliable thread engagement necessary for safe vehicle operation.

• Thread Size: 12 x 1.5
• Overall Length: 35mm
• Application: Suitable for OE replacement or use with wheel spacers
• Origin: Made in Germany
• Manufacturer Part Number: 1253544

H&R hardware is designed for durability and corrosion resistance. Always verify your specific thread pitch and length requirements before installation to ensure proper seating and torque specs. Sold individually.

Finish your wheel assembly with the genuine Gram Lights WR Center Cap. These caps provide a clean, flush aesthetic while shielding the hub assembly and axle nut from moisture and road grit. Engineered for a precise snap-in fit, they ensure your wheels look complete and professional on both street and track applications.

Constructed with the durability and tight tolerances expected from RAYS, these caps feature a signature red and black color scheme designed to complement the aggressive profile of the Gram Lights series. This specific model is tailored for compatibility across several popular 57-series platforms.

• Fits Gram Lights wheel models: 57CR, 57DR, and 57ANA
• Color/Finish: Red logo on black background
• Authentic Gram Lights/RAYS accessory
• Manufacturer Part Number: WCGLRDBK

Complete your wheel assembly with the Gram Lights WR Center Cap, designed for a precision snap-in fit on select 57-series wheels. These caps provide a clean, finished aesthetic while protecting the wheel hub and axle nut from road debris and moisture.

This WR series cap features a high-contrast Blue/Chrome finish that complements the aggressive styling of the Gram Lights lineup. Manufactured to exacting tolerances, they ensure a secure seat that won't vibrate loose during spirited driving or track use.

• Fits Gram Lights 57CR and 57DR wheel models
• Finish: Blue and Chrome
• Series: WR
• Authentic Gram Lights component
• Manufacturer Part Number: WCGLBLCH

This genuine BBS PFS Retaining Clip is a critical component of the BBS Precision Fitment System (PFS). It is engineered to securely lock the centering ring into the wheel hub bore, ensuring a stable, hub-centric connection that eliminates vibrations and maintains precise wheel alignment.

• Manufacturer Part Number: X0923415
• System Compatibility: BBS Precision Fitment System (PFS)
• Wheel Bore Size: 82mm
• Construction: High-tensile spring steel for consistent retention force
• Function: Replaces lost or damaged clips to secure hub-centric rings

Fits 2002-2006 Mitsubishi Lancer and Evolution models including ES, LS, Ralliart, and Evolution MR/RS/SE.

Secure your wheels with the industry-standard strength of ARP wheel studs. This kit is designed to replace factory hardware that may be prone to stretching or fatigue under the high loads of performance driving, track use, or when using aftermarket wheels and spacers. Engineered for precision and durability, these studs provide the consistent clamping force necessary for safe operation on and off the circuit.

• Manufacturer Part Number: 100-7717
• Quantity: 5 Studs (Covers one wheel)
• Direct replacement for OE Mitsubishi wheel studs
• Compatible with 2002-2006 Mitsubishi Lancer (all trims) and Evolution 8/9

Fits 1990-1997 Toyota Land Cruiser and 1996-1997 Lexus LX450 Base models (80 Series).

The ARB Left Hand Side (LHS) Spare Tire Carrier provides a rugged, practical solution for relocating your spare wheel from the vulnerable under-vehicle position or the factory door hinges. By mounting the tire directly to the ARB rear bumper assembly via a heavy-duty swing-out arm, you eliminate stress on the rear door assembly and prevent rattles and seal failure. This carrier is specifically designed for 80 Series models equipped with fender flares and features a durable black powder-coated finish.

Operation is engineered for ease of use, utilizing a gas-strut-assisted opening mechanism that holds the carrier in position even on uneven terrain. The dual shear pivot design ensures maximum structural integrity, while the multi-fit wheel stud system accommodates various rim selections. This unit requires an ARB rear bumper to complete the installation and is capable of carrying up to a 35-inch tire.

• Manufacturer Part Number: 5711231
• Gas strut assisted swing-out operation for simple one-handed use
• Dual shear pivots for superior arm strength and durability
• Secure locking system with provision for a padlock
• High-quality black powder coat finish
• Compatible with models featuring OE fender flares
• Provision for optional camp light or HF antenna brackets
• Accommodates up to a 35-inch spare tire
• Note: Requires ARB rear bumper for installation

Fits select 1977-2021 BMW and Mini models with a 5x120 bolt pattern and 72.6mm center bore. This pair of aFe CONTROL wheel spacers provides a 12.5mm offset reduction to improve wheel fitment, clear larger brake calipers, and widen the track for enhanced handling stability.

Precision-engineered for high-performance applications, these spacers feature a hub-centric design. This ensures the wheel is centered perfectly on the hub, transferring loads directly to the vehicle's platform and eliminating the steering vibration common with universal spacers. For ease of maintenance, integrated pry pockets allow for safe removal even after heat cycles or road debris buildup, preventing damage to the spacer or hub surfaces.

• Material: CNC-machined 6061-T6 billet aluminum for high strength-to-weight ratio
• Finish: Durable black anodized coating with laser-etched logo and sizing
• Dimensions: 12.5mm thickness, 5x120mm bolt pattern, 72.6mm center bore
• Features: Hub-centric design and integrated pry pockets for easy removal
• Installation: Requires longer wheel bolts or studs (sold separately)
• Quantity: Sold as a pair
• Manufacturer Part Number: 610-502001-B