Upgrade or replace your wheel hardware with this set of H&R specialty wheel bolts. Precision-engineered for durability and exact fitment, these bolts are ideal for securing aftermarket wheels or accommodating spacers that require specific shank lengths and seat types. The 1454301SW SET features a clean black finish for a stealthy look and improved corrosion resistance compared to standard zinc hardware.

• Thread Size: M14 x 1.5
• Shank Length: 43mm
• Seat Type: Tapered (Conical)
• Head Size: 17mm Hex
• Finish: Black
• Quantity: Set of 10
• Manufacturer Part Number: 1454301SW SET

Always verify the required seat type (tapered vs. ball seat) and thread engagement for your specific wheel and hub combination before installation to ensure a safe and secure fit.

H&R specialty wheel bolts are engineered for precision and durability, providing a secure mounting solution for Audi vehicles using M14 x 1.50 hardware. This bolt features a 42mm shank length, making it a necessary component when installing wheel spacers or aftermarket wheels that require additional thread engagement beyond the factory bolt length.

Finished in a sleek black coating for improved corrosion resistance and a clean aesthetic, these bolts utilize a standard 17mm hex head for compatibility with your factory or shop lug wrenches. The Audi-specific ball seat ensures proper load distribution and consistent torque retention against the wheel interface, preventing vibration and hardware fatigue.

• Thread Pitch: M14 x 1.50
• Shank Length: 42mm
• Seat Type: Ball Seat (Audi Style)
• Head Size: 17mm Hex
• Finish: Black
• Manufacturer Part Number: 14542033SW

Secure your wheels with this set of 10 premium H&R wheel bolts (MPN: 1454003SW SET), engineered for precision and durability. Featuring a 14x1.5 thread pitch and an extended 40mm shank length, these bolts are ideal for vehicles utilizing wheel spacers or aftermarket setups that require additional reach over factory hardware. The R13 ball seat profile is designed to match the radius of most original equipment VW and Audi wheels, ensuring maximum surface contact and proper torque retention.

Manufactured from high-tensile strength alloy steel and finished in a corrosion-resistant black coating, these bolts provide a clean, stealthy aesthetic while maintaining structural integrity under high load conditions. These are essential for any specialist looking to replace worn OE hardware or complete a custom wheel fitment project.

• Brand: H&R
• Part Number: 1454003SW SET
• Thread: 14 x 1.5
• Shank Length: 40mm
• Seat Type: Ball Seat (VW/Audi Style)
• Head/Hex Size: 17mm
• Finish: Black
• Quantity: Set of 10 Bolts

H&R specialty wheel bolts (MPN 1454002SW) provide a high-strength hardware solution for securing your wheels, whether you are replacing worn factory lugs or accommodating the added thickness of wheel spacers. These M14 x 1.5 bolts are engineered with precision-cut threads and high-tensile strength materials to ensure reliable torque retention and safety.

• Thread Pitch: M14 x 1.5
• Shank Length: 40mm
• Seat Type: Mercedes-style Ball Seat
• Wrench Size: 17mm Hex
• Finish: Durable Black Coating
• Part Number: 1454002SW

Each bolt is designed for exact compatibility with Mercedes-style ball seat applications, offering a clean, stealthy appearance with a black finish that resists corrosion and wear. These are ideal for enthusiasts looking for precision-engineered hardware that meets or exceeds OE standards.

H&R specialty wheel bolts provide a secure mounting solution for aftermarket wheels or vehicles utilizing wheel spacers. These M14 x 1.5 bolts feature a 40mm shank length, designed for applications where factory hardware does not provide sufficient thread engagement. The tapered (cone) seat ensures precise centering and optimal clamping force for wheels engineered for tapered hardware.

• Thread Pitch: M14 x 1.5
• Shank Length: 40mm
• Seat Type: Tapered / Cone Seat
• Head Size: 17mm Hex
• Finish: Black
• Quantity: Set of 10
• Manufacturer Part Number: 1454001SW SET

Manufactured for durability and corrosion resistance, these H&R bolts are suitable for both replacement use and performance upgrades. Always verify the required thread pitch, seat type, and shank length for your specific wheel and spacer configuration before installation to ensure safe operation.

These H&R wheel bolts are precision-engineered to provide a secure, high-strength mounting solution for your vehicle's wheels. Featuring a 14 x 1.5 thread pitch and an extended 38mm shank length, these bolts are ideal for applications where extra thread engagement is required, such as when using wheel spacers or specific aftermarket wheel configurations.

Every H&R bolt is manufactured to exacting tolerances to ensure consistent torque delivery and structural integrity. The tapered (conical) seat design is specifically intended for use with wheels that utilize a matching tapered lug pocket. The durable black finish provides a clean, stealthy look while offering added resistance against corrosion and road debris.

• Thread Size: 14 x 1.5
• Shank Length: 38mm
• Seat Type: Tapered (Conical)
• Head Size: 17mm Hex
• Finish: Black
• Quantity: Set of 10
• Manufacturer Part Number: 1453801SW SET

H&R Wheel Bolts provide a precision-engineered mounting solution for securing your vehicle's wheels. These M14 x 1.5 bolts feature a 38mm shank length and a 60-degree tapered (conical) seat, making them an essential choice for applications requiring extended thread engagement, such as when using wheel spacers or specific aftermarket wheels.

• Thread Size: M14 x 1.5
• Shank Length: 38mm
• Seat Type: 60 Degree Tapered (Conical)
• Hex Head Size: 17mm
• Quantity: Set of 10 Bolts
• Manufacturer Part Number: 1453801 SET

Manufactured to exacting standards, these bolts are designed for durability and consistent torque retention. Whether you are replacing damaged hardware or completing a suspension upgrade with H&R components, these specialty bolts ensure a proper fit. Always verify your wheel's seat type and required bolt length prior to installation.

Ensure secure wheel fitment with this set of 10 H&R specialty wheel bolts. Specifically engineered for applications requiring a 14x1.5 thread pitch and an R13 ball seat, these bolts feature a 37mm shank length, making them suitable for use as replacements or with select wheel spacer configurations on Volkswagen and Audi vehicles.

Each bolt is precision-machined to H&R's rigorous standards, ensuring accurate thread engagement and consistent torque application. The black finish provides a durable, corrosion-resistant surface that maintains a clean aesthetic on the hub. Whether you are replacing damaged factory hardware or optimizing your wheel offset, these high-strength fasteners deliver the reliability required for performance driving.

• Manufacturer Part Number: 1453703SW SET
• Thread Pitch: 14 x 1.5
• Shank Length: 37mm
• Seat Type: R13 Ball Seat
• Hex Head: 17mm
• Finish: Black
• Quantity: Set of 10 Bolts

Secure your wheels with high-strength H&R Specialty Wheel Bolts, engineered for precision fitment and long-term durability. These bolts are designed to replace worn factory hardware or provide the necessary shank length for use with wheel spacers. Featuring a specific R14 radius ball seat, they are correctly profiled for many Mercedes-Benz applications and other wheels requiring an R14 seat.

• Thread Pitch: M14 x 1.5
• Shank Length: 37mm
• Seat Type: R14 Ball Seat (Radius 14)
• Hex Head: 17mm
• Finish: Corrosion-resistant Black
• Quantity: Set of 10
• Manufacturer Part Number: 1453702SW SET

Secure your wheels with the precision and reliability of H&R wheel hardware. This single wheel bolt (MPN: 1453702SW) is engineered to meet the strict tolerances required for safe wheel fitment, whether you are replacing worn factory hardware or selecting a specific length for use with wheel spacers.

• Thread Pitch: 14 x 1.5
• Shaft Length: 37mm
• Seat Type: R14 Ball Seat (Mercedes-specific radius)
• Head Size: 17mm Hex
• Finish: Corrosion-resistant Black
• Manufacturer Part Number: 1453702SW

Each H&R bolt is manufactured from high-strength alloys to ensure consistent torque tension and thread integrity. The R14 ball seat is specifically designed to match the seating profile of select Mercedes-Benz wheels, ensuring full contact and preventing loosening due to vibration. The durable black coating provides a sleek look while protecting the substrate from road salt and oxidation.

Secure your wheels with precision-engineered H&R Wheel Bolts, designed for high-strength durability and exact fitment. This wheel bolt is an essential component for maintaining proper torque and wheel centering, whether you are replacing factory hardware or adjusting for different wheel offsets. It features a 37mm shank length and an R14 radius ball seat specifically designed for Mercedes-style wheel interfaces.

• Thread Pitch: M14 x 1.5
• Shank Length: 37mm
• Seat Type: R14 Radius Ball Seat (Mercedes-style)
• Hex Head Size: 17mm
• Finish: Zinc Plated for corrosion resistance
• Manufacturer Part Number: 1453702

Each H&R bolt is manufactured to meet rigorous standards, ensuring reliable thread engagement and resistance to shear stress. Before installation, always verify that the 37mm length provides sufficient thread engagement for your specific hub and wheel combination.

Fits select VW and Audi models requiring 14x1.5mm ball seat hardware. H&R wheel bolts are engineered for precision and durability, making them an essential choice for securing your wheels or installing spacers. This set of 10 high-tensile bolts features a 14x1.5mm thread pitch and the ball seat profile required for factory VW and Audi wheel applications.

Finished in a resilient black coating for corrosion resistance and a clean aesthetic, these bolts utilize a standard 17mm hex head for compatibility with common shop tools. Whether you are replacing worn hardware or matching a specific shank length for aftermarket setups, these H&R bolts provide the strength and fitment accuracy required for performance driving.

• Thread Size: 14 x 1.5mm
• Shank Length: 35mm
• Seat Type: Ball Seat
• Head Size: 17mm Hex
• Finish: Black
• Quantity: Set of 10
• Manufacturer Part Number: 1453503SW SET

These H&R wheel bolts are engineered for Mercedes-Benz applications requiring a 14x1.5 thread pitch and a radius (ball) seat. Designed to meet or exceed OEM standards, these high-strength fasteners provide the necessary thread engagement when installing wheel spacers or replacing worn factory hardware.

• Thread Pitch: M14 x 1.5
• Shank Length: 35mm
• Seat Type: Mercedes Ball Seat (Radius)
• Hex Head: 17mm
• Quantity: Set of 10
• Manufacturer Part Number: 1453502 SET

Each bolt is manufactured from high-tensile steel and features a durable finish to resist corrosion and ensure consistent torque values. Always verify the required shank length and seat type for your specific wheel and spacer combination before installation.

Upgrade or replace your hardware with this set of 10 H&R high-strength wheel bolts. Designed for precision and durability, these bolts feature a black finish for a clean look and excellent corrosion resistance. They are specifically engineered with a 60-degree tapered (conical) seat, a standard requirement for many aftermarket wheel designs.

Whether you are replacing worn hardware or matching a specific 35mm shank length for use with wheel spacers, these H&R bolts provide the necessary clamping force and thread engagement for secure operation. Always verify the required thread pitch, seat type, and shank length for your specific wheel and vehicle application before installation.

• Thread Pitch: M14 x 1.5
• Shank Length: 35mm
• Seat Type: Tapered (Conical)
• Head Size: 17mm Hex
• Finish: Black
• Quantity: Set of 10 Bolts
• Manufacturer Part Number: 1453501SW SET

H&R Specialty Wheel Bolts provide the precision and strength required for secure wheel fitment, whether you are replacing damaged hardware or sourcing longer bolts for wheel spacers. These high-tensile bolts are engineered for durability and consistent torque retention, ensuring your wheels remain properly seated under various driving conditions.

This set of 10 features an M14 x 1.5 thread pitch with a 30mm shaft length and a 60-degree tapered (cone) seat, making them compatible with many aftermarket wheels. The black finish provides a clean, understated look that resists corrosion and complements darker wheel finishes. Always verify your wheel's seat type (tapered vs. ball) before installation to ensure a safe and proper interface.

• Thread Size: M14 x 1.5
• Shaft Length: 30mm
• Seat Type: Tapered (Cone)
• Wrench/Hex Size: 17mm
• Finish: Black
• Quantity: Set of 10
• Manufacturer Part Number: 1453001SW SET

H&R specialty wheel bolts are precision-engineered to provide secure fastening for performance and replacement applications. This set of 10 bolts features an M14 x 1.25 thread pitch and an extended 50mm shaft length, making them an ideal choice for use as OE replacements or in conjunction with wheel spacers where additional thread engagement is required.

Each fastener is designed with a tapered (conical) seat to ensure proper centering and uniform torque distribution against the wheel hub. Finished in a durable black coating for superior corrosion resistance and a low-profile aesthetic, these bolts utilize a standard 17mm hex head for compatibility with factory and aftermarket lug wrenches. Manufactured to H&R's exacting standards, these bolts offer the reliability needed for high-stress automotive environments.

• Thread Pitch: M14 x 1.25
• Shaft Length: 50mm
• Seat Type: Tapered / Conical
• Head Size: 17mm Hex
• Finish: Black
• Quantity: Set of 10
• Manufacturer Part Number: 14255001SW SET

Secure your wheels with precision-engineered H&R wheel bolts, designed for high-strength performance and exact tolerances. These M14 x 1.25 thread bolts feature a 43mm shank length, providing the necessary reach for specific aftermarket wheels or when installing wheel spacers. Manufactured to H&R's rigorous standards, each bolt is finished in a durable black coating to provide long-lasting corrosion resistance while maintaining a sleek, low-profile look.

• Thread Size: 14 x 1.25
• Shank Length: 43mm
• Seat Type: Tapered (Cone Seat)
• Wrench Size: 17mm Hex
• Finish: Black
• Quantity: Set of 10 Bolts
• Manufacturer Part Number: 14254301SW SET

Whether you are replacing worn hardware or matching new components to your suspension setup, these specialty fasteners ensure a reliable and secure fitment.

Ensure secure wheel fitment with this set of 10 H&R specialty wheel bolts. Engineered for strength and precision, these bolts are designed for vehicles requiring an M14 x 1.25 thread pitch and a tapered (conical) seat. The 40mm shank length makes these an ideal solution when installing wheel spacers or aftermarket wheels that require additional thread engagement compared to factory hardware.

• Thread Pitch: M14 x 1.25
• Shank Length: 40mm
• Seat Type: Tapered (Conical)
• Hex Head Size: 17mm
• Finish: Black
• Quantity: Set of 10
• Manufacturer Part Number: 14254001SW SET

Upgrade or replace your wheel hardware with this set of 10 H&R specialty wheel bolts. Engineered for precision and durability, these high-tensile fasteners are ideal for securing wheels that require a tapered seat. The 35mm shank length provides the necessary reach for various wheel and spacer configurations, while the 17mm hex head ensures compatibility with standard lug wrenches.

Each bolt is finished in a corrosion-resistant black coating, providing a clean, low-profile look that complements dark or performance-oriented wheels. These are designed as direct replacements for hardware with matching specifications or for use as part of a custom wheel setup.

• Thread Pitch: 14 x 1.25
• Shank Length: 35mm
• Seat Type: Tapered (Conical)
• Head/Hex Size: 17mm
• Finish: Black
• Quantity: Set of 10
• Manufacturer Part Number: 14253501SW SET

Complete your wheel assembly with the Fifteen52 Super Touring Threaded Snout. Engineered as a core component of the Super Touring center cap system, this threaded snout provides the secure mounting point required for a modular, motorsport-inspired look on compatible Fifteen52 wheel styles.

• Part Number: 52-ST-SNOUT-SILVER
• Series: Super Touring
• Finish: Anodized Silver
• Protective Coating: Satin Clear Cover Plate
• Construction: Durable, corrosion-resistant alloy for long-term wheel center protection

Designed for enthusiasts who demand precision, this component features a high-quality anodized silver finish protected by a satin clear cover plate to resist road debris and environmental wear. It ensures a perfect fit and finish for your Super Touring setup.

The Fifteen52 Super Touring Threaded Snout is a precision-engineered replacement component for the Super Touring wheel line's modular center cap system. This snout provides the necessary threaded mounting point for center-lock style caps, ensuring the iconic motorsport-inspired aesthetic of your wheels remains secure and intact.

• Material: Precision-machined construction for exact tolerances and vibration resistance.
• Finish: Durable Anodized Black with a Satin Clear topcoat for enhanced protection against road debris and corrosion.
• System Compatibility: Designed specifically for use with Fifteen52 Super Touring series wheels (Integrale, Chicane, etc.).
• Installation: Direct replacement for original hardware; installs onto the wheel center to accept the locking nut.
• Manufacturer Part Number: 52-ST-SNOUT-BLACK

Complete the motorsport-inspired aesthetic of your wheels with the Fifteen52 Super Touring Small Cover Plate. Designed as a direct accessory for the Super Touring wheel series, this small-diameter plate provides the signature clean, aerodynamic look that defines Fifteen52's rally-bred heritage.

This cover plate is finished in Fifteen52's durable Rally White, ensuring a seamless match for your existing wheel set. Whether you are replacing a lost component or refreshing your wheel's appearance, this genuine part offers the precise tolerances and fitment expected from Fifteen52 hardware.

• Product Series: Super Touring
• Component: Small Cover Plate
• Finish: Rally White
• Manufacturer Part Number: 52-ST-COVER-S-RW
• Designed for use with select Super Touring wheel models

Complete your wheel assembly with the authentic fifteen52 Super Touring Small Cover Plate. Specifically engineered for the Super Touring wheel line, this component provides a clean, motorsport-inspired aesthetic while concealing and protecting the center bore area. The Frosted Graphite finish is applied to ensure a seamless match for wheels in the same colorway, maintaining the high-end, purposeful look of your fifteen52 setup.

• Part Type: Wheel Center Cover Plate
• Series: Super Touring
• Size Configuration: Small
• Finish: Frosted Graphite
• Manufacturer Part Number: 52-ST-COVER-S-FG
• Compatibility: Designed specifically for fifteen52 Super Touring series wheels

Eliminate steering wheel vibration and ensure a precise wheel-to-hub fit with this set of Konig Aluminum Hub Centric Rings. These rings are designed to bridge the gap between a wheel with a 73.1mm center bore and a vehicle hub with a 60.1mm diameter. By centering the wheel perfectly on the hub, these rings move the load-bearing stress away from the lug studs, improving safety and ride quality.

Constructed from high-grade aluminum, these rings offer significantly better heat resistance and longevity than plastic alternatives, making them ideal for high-performance driving and track applications where brake heat is a factor.

• Outside Diameter (O.D.): 73.1mm
• Inside Diameter (I.D.): 60.1mm
• Material: Machined Aluminum
• Quantity: Set of 4 rings
• Manufacturer Part Number: HR736010AL

The Vossen LUG-N-SOCKET-19 is a specialized 19mm socket engineered for the safe installation and removal of lug nuts on premium wheels. This tool features a durable non-marring protective sleeve that acts as a buffer between the socket's steel wall and the wheel's lug nut bore. This critical layer of protection prevents the scratches, chips, and finish damage often caused by standard deep-well sockets during torqueing or removal.

• Precision 19mm hex fitment
• Integrated non-marring outer sleeve to protect wheel finishes
• Heavy-duty construction suitable for hand tools and impact use
• Essential for maintaining the aesthetic integrity of high-end wheels
• Manufacturer Part Number: LUG-N-SOCKET-19

Fits select 1988-2025 Acura, Buick, Cadillac, Chevrolet, Chrysler, Dodge, GMC, and Honda vehicles equipped with M14x1.5 wheel studs.

The Mishimoto MMLG-M14-20LSL Steel Locking Lug Nut Set is engineered to provide a high-strength alternative to failure-prone two-piece OEM lug nuts. Each lug is forged from high-strength steel with a solid one-piece construction that prevents the common issues of swelling, cracking, and impact-related stress. The open-ended design allows these nuts to be used with standard or extended wheel studs, while the 19mm hex provides compatibility with most aftermarket wheel pockets.

This 20-piece kit includes 16 standard lug nuts and 4 locking lug nuts to enhance vehicle security. A specialized 7-point, non-marring locking tool is included to ensure a secure fit without damaging the finish of your wheels. These lug nuts are finished in silver and backed by the Mishimoto Lifetime Warranty.

• Thread Pitch: M14x1.5
• Hex Size: 19mm
• Construction: One-piece high-strength steel
• Quantity: 20-piece kit (16 standard, 4 locking)
• Seat Style: Conical
• Design: Open-ended for extended studs
• Includes 7-point non-marring locking tool
• Manufacturer Part Number: MMLG-M14-20LSL

This Mickey Thompson Classic III Open Center Cap is engineered specifically for heavy-duty 8-lug applications requiring access to manual locking hubs. Built for the Classic III wheel series, this center cap provides a secure, screw-on fit and a durable, non-corrosive construction that withstands the elements on the street or the trail.

Featuring a distinct two-tone finish and the iconic Mickey Thompson logo, this cap balances aesthetics with functional utility for 4WD vehicles. The open-center design allows for easy hub engagement while maintaining a finished look for your wheel assembly.

• Part Number: 224400048
• Design: Open-center for manual locking hub access
• Compatibility: Mickey Thompson Classic III wheels
• Bolt Patterns: 8x6.5 and 8x170
• Mounting Type: Screw-on
• Finish: Two-tone
• Construction: Corrosion-resistant material

The Mickey Thompson Classic III Closed Center Cap is a durable, corrosion-resistant replacement designed specifically for Classic III series wheels. Engineered for vehicles with an 8x6.5 bolt pattern, this cap features a secure screw-on mounting style to ensure it remains seated during high-vibration off-road or street use.

• Compatible with Mickey Thompson Classic III wheels with 8x6.5 bolt pattern
• Two-tone finish provides a clean, professional aesthetic
• Corrosion-resistant construction designed to withstand harsh environments
• Secure screw-on installation prevents cap loss
• Features the iconic Mickey Thompson logo
• Closed style design for non-locking hub applications
• Manufacturer Part Number: 224400044

Maintain the clean aesthetic of your Method Race Wheels with this genuine T082 series screw-on center cap. Designed for durability and a precise fit, this cap is a direct replacement for lost or damaged components, ensuring your wheel assembly remains complete and protected from debris.

This cap utilizes a secure threaded screw-on mounting style, specifically engineered to withstand the vibrations of off-road and street use. It is compatible with various bore diameters ranging from 71.5mm to 132mm, depending on your specific wheel configuration.

• Manufacturer Part Number: CP-T082L90-H48
• Series: T082
• Mounting Type: Screw-On/Threaded
• Compatibility Bores: 71.5mm, 87mm, 106mm, 132mm
• Application: Direct replacement center cap for select Method Race Wheels

Replace a missing or damaged center cap with a genuine Method Race Wheels T080 snap-in cap. This replacement component is engineered specifically for Method wheels with an 86mm center bore, providing a secure, flush fit that restores the original look of your wheel setup.

• Manufacturer Part Number: CP-T080K86
• Series/Model: T080
• Outer Diameter: 86mm
• Finish: Black
• Mounting Type: Snap-In (No bolts required)

Built to withstand the rigors of both street and off-road driving, this cap features durable construction designed to resist debris and corrosion. To ensure compatibility, verify that your existing wheels utilize the snap-in T080 series cap and match the 86mm bore specification.