Ensure you can safely remove and install your wheels with this genuine Project Kics replacement lock key. This spare key is specifically designed for the Project Kics R40 and R26 series racing lug nut sets, providing a precise interface for the unique internal-drive locking nuts.

• Fits Project Kics Leggdura Racing R40 and R26 series lug nuts
• Key Number Identification: #15 (num15)
• Genuine Project Kics replacement hardware
• Durable construction for high-torque applications
• Manufacturer Part Number: W315SLK (Ref: K-42815)

If you have lost or damaged your original socket, this exact replacement restores the ability to service your vehicle without risking damage to the lug nuts or the wheel finish. Always verify your key pattern number (stamped on the original key or the packaging code) matches #15 before ordering.

Designed specifically for 17-inch Dirty Life 9302, 9303, and 9304 series wheels, this matte black race ring allows you to replace damaged hardware or refresh the appearance of your off-road wheel set. Built to withstand the rigors of aggressive trail use, these rings provide the structural integrity and fitment precision required for Dirty Life's specialized wheel designs.

• Finish: Matte Black
• Diameter: 17-inch
• Compatibility: Fits Dirty Life 9302, 9303, and 9304 series wheels
• Application: Replacement or custom race ring for off-road use
• Brand: Dirty Life

This Method Race Wheels forged beadlock ring is engineered for 20-inch wheels requiring a Style 1 configuration. Forged from high-grade aluminum, this ring is built to withstand the extreme lateral loads and impacts encountered during off-road use while maintaining a secure bead seat at low tire pressures.

• Compatible with 20-inch Method Race Wheels beadlock series wheels
• High-strength forged aluminum construction for maximum density and durability
• Style 1 ring profile design
• Corrosion-resistant Gloss Black finish
• Engineered for off-road bead security

This Method Race Wheels Style 1 forged beadlock ring is engineered for high-strength performance and tire security in demanding off-road environments. Designed as a direct replacement or upgrade for 20-inch Method forged beadlock wheels, this ring provides the precise clamping force required to lock the tire bead to the wheel, allowing for reliable operation at low tire pressures. The forged construction offers superior structural integrity and impact resistance over standard cast rings.

• Precision forged for maximum strength and durability
• Sized specifically for 20-inch Method forged beadlock wheel applications
• Style 1 design with a raw machined finish
• Ensures proper tire bead retention during technical off-road driving

Maintain maximum traction on technical terrain with this Method Race Wheels 18-inch forged beadlock ring. Engineered for off-road enthusiasts who air down to low pressures for increased footprint, this Style 1 ring provides the essential clamping force required to keep the tire bead secured to the wheel under heavy side loads and high torque.

Forged construction ensures superior grain structure and strength compared to standard cast rings, allowing it to withstand direct impacts from rocks and trail debris. This replacement or upgrade ring features the distinctive Style 1 design and a durable red finish for long-lasting performance and a custom look.

• Product Series: Style 1 Beadlock Ring
• Wheel Diameter: 18 inch
• Construction: Forged Aluminum
• Finish: Red
• Application: Compatible with Method Race Wheels 18" beadlock wheels

Upgrade or replace your hardware with this Method Race Wheels Style 1 Forged Beadlock Ring. Engineered for 18-inch Method beadlock wheels, this ring is precision-forged to provide maximum clamping force, ensuring your tire beads remain seated even during high-torque, low-pressure off-road maneuvers.

• Forged aluminum construction for exceptional strength and reduced rotational mass
• Designed for 18-inch Method Race Wheels beadlock applications
• Gloss black finish provides a clean look and high resistance to trail debris
• Style 1 design maintains the classic Method off-road aesthetic
• Critical component for maintaining tire security in rugged terrain

This 18-inch forged beadlock ring from Method Race Wheels is engineered for high-stress off-road environments where tire retention is critical. Designed for use with Method beadlock wheels, this ring secures the tire bead to the wheel flange, allowing you to run significantly lower air pressures for maximum traction without the risk of de-beading. The forged construction provides a superior strength-to-weight ratio over cast components, offering the durability needed to withstand impacts from rocks and trail debris.

• Diameter: 18 inch
• Material: Forged Aluminum
• Design Series: Style 1
• Finish: Machined
• Function: Secure tire bead for low-pressure off-road use

Upgrade or replace your hardware with this Method Race Wheels 17-inch forged beadlock ring. Engineered for off-roaders who demand maximum reliability at low tire pressures, this ring provides the clamping force necessary to keep tire beads securely seated during aggressive maneuvers in rock, sand, and silt.

• Forged construction provides superior strength and impact resistance compared to cast alternatives
• Designed specifically for Method Style 1 17-inch beadlock wheels
• Durable red finish offers corrosion resistance and a distinct custom aesthetic
• Precision-machined tolerances ensure even pressure across the tire bead
• Direct replacement for Method Style 1 beadlock hardware

Secure your tire beads for demanding off-road terrain with this Method Race Wheels Style 1 forged beadlock ring. Specifically engineered for 17-inch Method beadlock wheels, this ring provides the mechanical clamping force required to prevent de-beading when running low tire pressures during rock crawling or desert racing.

• Forged aluminum construction for maximum structural integrity and weight savings
• 17-inch diameter designed for Method Style 1 beadlock wheel configurations
• Durable gloss black finish provides excellent corrosion resistance in harsh environments
• Critical component for maintaining tire seating during high-torque, low-PSI maneuvers

This Method Style 1 Forged Beadlock Ring is engineered to provide maximum tire security for high-performance off-road applications. Designed for use with 17-inch Method beadlock wheels, the ring is manufactured using a forging process that results in a denser, stronger component compared to traditional cast rings. This ensures your tire beads remain locked in place when running low air pressures on technical terrain.

• Diameter: 17 Inch
• Construction: Forged Aluminum
• Design: Style 1
• Finish: Machined
• Compatible with Method 17" beadlock-capable wheels requiring Style 1 hardware

Maintain the clamping force and security of your beadlock rings with the Method Beadlock Hardware Kit. This replacement fastener set is specifically designed to handle the stresses of off-road driving, ensuring the outer ring remains properly seated against the tire bead even at low air pressures.

This 24-piece kit is a direct replacement for lost, stripped, or fatigued hardware on Method Race Wheels beadlock series wheels. Using fresh hardware prevents thread galling and ensures consistent torque across the entire ring for a reliable, leak-free seal.

• Thread Pitch: 5/16-18
• Bolt Length: 1.25 inches
• Kit Contents: 24 individual bolts
• Compatibility: Method Race Wheels Beadlock series

The Raceline Beadlock Bolt Kit (RBL-BOLT1" 20PCS. KIT) provides the high-strength hardware necessary to properly secure beadlock rings for off-road use. Manufactured from Grade 8 steel, these bolts offer the required tensile and shear strength to maintain a consistent clamp load on the tire bead, preventing air leaks or ring failure during low-pressure operation or heavy rock crawling. This kit includes a full set of 20 bolts plus two additional spares to keep in your trail kit for unexpected maintenance.

• Material: Grade 8 high-tensile steel hardware
• Thread Pitch: 5/16-18
• Length: 1.00 inch
• Quantity: 20 piece set with 2 additional extra bolts (22 total)
• Manufacturer Part Number: RBL-BOLT1" 20PCS. KIT

Fits select 2023-2025 Ford Expedition, F-150, F-250/F-350 Super Duty, and Lincoln Navigator models. This kit is specifically engineered for vehicles equipped with 433MHz tire pressure monitoring systems.

This Ford Racing TPMS kit is essential when installing new wheels or replacing faulty sensors to ensure your vehicle correctly monitors and reports tire pressure. Maintaining a functional TPMS is critical for optimal fuel economy, tire wear, and safety. The kit includes the 433MHz sensor and the required handheld activation tool, allowing you to sync the new hardware to your vehicle's computer without a trip to the dealership.

• Manufacturer Part Number: M-1180-433MHZ
• Frequency: 433MHz
• Included Hardware: TPMS sensor and handheld activation tool
• Installation: Mounts to factory or compatible aftermarket valve stem locations
• Compatibility: Designed for late-model Ford and Lincoln trucks and SUVs

Enhance the aerodynamics and visual profile of your vehicle with the Konig AROCOVER, specifically engineered for the 15-inch Konig MRK1 wheel series. This aerodynamic insert provides a distinct motorsport-inspired "turbofan" aesthetic while assisting with airflow management around the wheel assembly.

Constructed for a precise fit, the AROCOVER integrates directly with the MRK1's design, offering an easy way to customize your wheel setup for a unique, functional look. These covers are an ideal choice for enthusiasts looking to bridge the gap between street styling and track-ready aerodynamics.

• Designed exclusively for 15" Konig MRK1 wheels
• Delivers a functional aerodynamic "turbofan" appearance
• Precision fitment for secure installation
• Sold individually (Single cover)
• Manufacturer Part Number: AROCOVER15

Ensure a secure and consistent seal on your off-road wheels with the Raceline 17-Inch 32-Hole Beadlock Spacer Kit. These 1/8-inch spacers are specifically engineered to provide the necessary clearance between the wheel and the beadlock ring when running tires with exceptionally thick beads. By utilizing these spacers, you maintain optimal clamping force across the entire bead circumference, preventing air leaks and ensuring the tire remains properly seated during low-pressure technical maneuvers.

This kit is a critical hardware solution for racers and off-road enthusiasts who encounter mounting challenges with specific tire carcasses on 32-hole Raceline beadlock wheels. Precision-cut for an exact fit, these spacers facilitate a flat, even mounting surface for the ring to bolt down securely.

• Specifically designed for 17-inch 32-hole Raceline beadlock wheels
• 1/8-inch thickness provides essential clearance for thick tire beads
• Ensures even clamping pressure for improved tire retention
• Includes a complete set of 4 spacers
• Manufacturer Part Number: RBL17-SPACER

Complete your wheel setup with the Fifteen52 Valve Stem Cap Set. These gold-finished caps provide a clean, finished aesthetic while serving the critical function of protecting your valve cores from road debris, dust, and moisture. Designed for a precise fit on standard Schrader valve stems, this set is the ideal finishing touch for Fifteen52 wheels or any aftermarket wheel application.

• Finish: Gold
• Quantity: 4-Piece Set
• Compatibility: Standard Schrader valve stems
• Manufacturer Part Number: 52-VALVE-PACK-GOLD

Eliminate steering wheel vibration and ensure a precise wheel-to-hub fit with this set of Konig Aluminum Hub Centric Rings. These rings are designed to bridge the gap between a wheel with a 73.1mm center bore and a vehicle hub with a 60.1mm diameter. By centering the wheel perfectly on the hub, these rings move the load-bearing stress away from the lug studs, improving safety and ride quality.

Constructed from high-grade aluminum, these rings offer significantly better heat resistance and longevity than plastic alternatives, making them ideal for high-performance driving and track applications where brake heat is a factor.

• Outside Diameter (O.D.): 73.1mm
• Inside Diameter (I.D.): 60.1mm
• Material: Machined Aluminum
• Quantity: Set of 4 rings
• Manufacturer Part Number: HR736010AL

Maintain proper wheel balance without sacrificing aesthetics or clearance with the Wheel Mate 39922 Low Profile Wheel Weight. These 1/4oz segments are engineered with a slim profile to ensure they clear high-performance brake calipers and other tight suspension components where standard weights might interfere. The durable black finish is specifically designed to blend into dark or black wheel barrels for a clean, professional look.

• Manufacturer Part Number: 39922
• Weight: 1/4oz per segment
• Profile: Low-profile design for maximum caliper clearance
• Finish: Corrosion-resistant black
• Attachment: High-strength adhesive backing for secure fitment

The Wheel Mate Muteki Key Adapter (MPN 30809G) is a precision-engineered replacement tool designed specifically for Muteki lug nuts featuring a 12x1.25 thread pitch pattern. Whether you are replacing a lost key or adding a spare to your tool kit, this adapter provides a secure, flush interface to prevent rounding or marring your wheel hardware during installation and removal.

• Direct Replacement: Engineered specifically for Muteki series lug nuts with 12x1.25 geometry.
• Heavy-Duty Construction: Manufactured from high-strength steel to withstand the high torque requirements of wheel installation.
• Low Profile Design: Slim wall thickness allows for easier access within tight wheel lug holes.
• Manufacturer Part Number: 30809G

This tool is essential for any technician or DIY enthusiast running Muteki hardware, ensuring you can safely perform tire rotations or brake service without damaging your specialized fasteners.

Maintain your wheels properly with the genuine Rays Key Number 27 replacement tool. This socket is specifically engineered to fit Rays L32 Short Type security hardware, ensuring a precise interface for installation and removal without damaging the finish of your lug nuts.

Whether you are replacing a lost tool or keeping a spare in your track-day kit, this high-strength key is built to handle the necessary torque for automotive wheel applications. Using the correct coded key is essential for preventing the rounding of hardware and ensuring vehicle safety.

• Manufacturer Part Number: WRKEY27
• Key Code: Number 27
• Series Compatibility: L32 Short Type
• Direct replacement for lost or damaged Rays security keys

Lost or damaged your wheel lock socket? The Project Kics Spare Lock Key No. 14 (W314SLK) is the genuine replacement component designed to restore access to your wheels. This key is specifically engineered to interface with the unique pattern of Number 14 locks found in Project Kics R40 and R26 series Racing Composite lug nut sets.

• Fits Project Kics R40 and R26 series lug nut sets
• Key Pattern: No. 14
• High-strength construction for reliable torque transfer during wheel removal and installation
• Essential for routine maintenance, brake service, and tire rotations
• Manufacturer Part Number: W314SLK

Precision fitment is critical for wheel locks; ensure your current lock set matches the No. 14 pattern before ordering. This key replaces the original socket provided with your R40 or R26 hardware kit, allowing for use with standard hand tools.

This is a genuine Project Kics replacement lock key designed specifically for the R40 and R26 series lug nut sets. If your original socket is lost or damaged, this replacement allows you to safely remove and install your wheel locks without compromising the specialized keyed pattern.

Precision-engineered from high-strength steel, this socket is built to handle the torque requirements of performance wheel applications. It is essential to verify your specific key number before ordering; this socket is matched exclusively to Key Number 12 (num12) patterns.

• Compatible Series: Project Kics R40 and R26
• Key Identifier: Number 12 (num12)
• Material: High-strength steel alloy
• Application: Direct replacement for lost or damaged R40/R26 lock keys
• Manufacturer Part Number: W312SLK

The Project Kics Replacement Spare Lock Key is a precision-engineered tool designed to service the security lock nuts found in Project Kics R26 and R40 series lug nut sets. This genuine replacement key is essential for owners who have lost or damaged their original security tool, ensuring you can safely remove and install your wheels without damaging the lug nut engagement pattern.

• Specifically designed for Project Kics R26 and R40 Racing Composite lug nut series
• Key Pattern ID: Number 11
• Durable steel construction provides reliable torque transfer and longevity
• Direct replacement for the original lock key included with lock sets
• Manufacturer Part Number: W311SLK

Always verify your specific lock pattern number (located on your original key or documentation) before ordering to ensure compatibility with your vehicle's current security hardware.

Ensure you can safely remove your wheels with the genuine Rays Engineering L32 Short Type replacement key. This specialized socket is designed to interface perfectly with the internal drive splines of the L32 Short Type lug nut series, providing a secure grip that prevents slipping or rounding off the hardware during high-torque applications.

Whether you are replacing a lost tool or adding a spare to your emergency road kit, this key ensures you have the correct fitment for your Rays hardware. It is manufactured to the tight tolerances required for precision automotive fasteners, maintaining the integrity of your wheel installation.

• Product Type: Replacement Lug Nut Key
• Key Identification: Number 37
• Lug Nut Series: L32 Short Type
• Manufacturer Part Number: WRKEY37
• Construction: High-strength steel alloy

Ensure you can securely remove or install your wheels with this genuine Rays Replacement Key Number 27. Specifically engineered for use with the Rays L42 Long Type series wheel locks and lug nuts, this specialized tool provides the precise interface required to engage the lock pattern without slipping or damaging the finish.

Whether you are replacing a lost tool or adding a spare to your emergency roadside kit, this authentic Rays component is manufactured from high-strength steel to handle the torque specifications required for automotive wheel hardware. Its extended length is designed to clear deep-dish wheel pockets and provide better leverage during use.

• Manufacturer Part Number: WRKEY27L
• Key Pattern: Number 27
• Series Compatibility: Rays L42 Long Type
• Material: High-tensile hardened steel
• Application: Direct replacement for lost or damaged L42 series keys

Enhance the finish of your wheel hardware with Project Kics Monolith M14 Lug Nut Caps. These caps are specifically engineered to fit Project Kics Monolith series lug nuts, providing a clean, closed-end appearance while shielding the internal threads and wheel studs from road grime, moisture, and debris accumulation.

• Compatibility: Specifically for M14 Project Kics Monolith Lug Nuts only
• Quantity: Set of 20 pieces
• Finish: Red
• Construction: Durable, lightweight aluminum
• Installation: Threads directly into the Monolith lug nut body
• Manufacturer Part Number: WCMF4R

By sealing the open-end design of the Monolith series, these caps offer an extra layer of protection for your studs and hardware, making them ideal for both street and show applications where aesthetics and maintenance are priorities.

Protect your wheel hardware and refine your vehicle's aesthetic with the Project Kics Monolith M14 Wheel Lug Nut Caps. These caps are specifically engineered to thread into Project Kics M14 Monolith series lug nuts, providing a clean, finished appearance while shielding the internal threads and wheel studs from road debris, moisture, and corrosion.

Constructed for a precise fit, these caps ensure that the open-ended design of the Monolith lugs remains free of grime and salt buildup. This set of 20 is finished in a durable black coating to match or contrast your wheel setup. Please note that these caps are designed exclusively for the M14 Monolith series and are not compatible with other lug nut models.

• Manufacturer Part Number: WCMF4K
• Series: Monolith
• Thread Size Compatibility: M14
• Finish: Black
• Quantity: Set of 20 caps

Complete your wheel setup with the Project Kics Monolith M12 Lug Nut Caps. Specifically engineered to work exclusively with M12 Monolith series lug nuts, these caps provide a clean, flush appearance while protecting the internal threads and hardware from road debris, moisture, and corrosion.

• Designed specifically for Project Kics Monolith M12 lug nut series
• Creates a sleek, finished look for open-ended lug nuts
• Protects internal hardware from dirt and environmental buildup
• Color: Black
• Quantity: Set of 20
• Manufacturer Part Number: WCMF1K

Note: These caps are compatible ONLY with M12 Project Kics Monolith lug nuts. They will not fit other series or thread sizes.

Upgrade your wheel assembly with the Project Kics Leggdura Racing Valve Cap Set in Blue. These precision-engineered caps serve as a high-quality replacement for standard plastic caps, providing a refined aesthetic accent to performance wheels while offering superior protection for your valve cores.

Constructed to the exacting standards of the Leggdura Racing line, these caps are designed to shield Schrader valve stems from road grime, moisture, and debris that can lead to pressure leaks. The durable finish is resistant to the elements, ensuring long-lasting color and corrosion resistance for both daily driving and track use.

• Brand: Project Kics
• Series: Leggdura Racing
• Part Number: WCKIVU
• Color: Blue
• Quantity: Set of 4
• Fitment: Universal for standard Schrader valve stems

Protect your tire valve cores and enhance your wheel aesthetics with the Project Kics Leggdura Racing Valve Cap Set in Red (WCKIVR). These caps are designed to provide a secure seal for standard Schrader valve stems, preventing dust, moisture, and road debris from compromising your valve cores.

• Color: Red finish
• Quantity: Set of 4 caps
• Fitment: Universal for standard Schrader valve stems
• Installation: Thread-on design with knurled grip for easy handling
• Manufacturer Part Number: WCKIVR

Ideal for enthusiasts seeking a durable, high-visibility replacement for factory plastic caps, these units are built to withstand daily driving conditions while maintaining a clean, racing-inspired look on any wheel set.