Fits select 1991-2020 Acura and Honda models, including Accord, Civic, NSX, S2000, and TL (5/114.3 bolt pattern).

H&R Trak+ DRS Series wheel spacers widen your vehicle's track for a flush fender-to-wheel fitment, improved lateral stability, and a more aggressive stance. Unlike generic spacers, these are hubcentric, featuring a full-contact hub face that mimics the factory design to ensure even load distribution and a vibration-free ride at highway speeds.

The DRS Series is designed for applications where the factory studs are replaced with the included longer H&R studs to maintain proper thread engagement. Each spacer is precision-machined from a proprietary aluminum/magnesium alloy specifically engineered for H&R to provide higher tensile strength than standard 6061-T6 billet aluminum.

• Width: 15mm
• Bolt Pattern: 5/114.3
• Center Bore: 64.1mm
• Thread Type: 12x1.5
• Series: Trak+ DRS
• Material: High-tensile proprietary aluminum/magnesium alloy
• Finish: Hard-anodized Black
• Origin: Made in Germany
• Manufacturer Part Number: 3065640SW

Fits select 1991-2020 Acura and Honda models, including Accord, Civic, CR-V, NSX, S2000, and TL.

H&R Trak+ Wheel Spacers widen your vehicle's track for improved lateral stability and a flush, aggressive stance. The DRS Series 15mm spacers are engineered to fit between the wheel and the hub, utilizing the included longer wheel studs to ensure proper thread engagement and safety. Unlike generic alternatives, H&R Trak+ components are hubcentric, featuring a full-contact hub design that mimics factory geometry for even load distribution and vibration-free performance.

Manufactured in Germany from a proprietary aluminum/magnesium alloy, these spacers provide higher tensile strength than standard 6061-T6 billet aluminum while reducing unsprung weight. The DRS series is ideal for enthusiasts looking to optimize wheel fitment without compromising structural integrity.

• Width: 15mm
• Bolt Pattern: 5/114.3
• Center Bore: 64.1mm
• Thread Pitch: 12x1.5
• Series: Trak+ DRS (Includes extended studs)
• Material: High-tensile proprietary alloy
• Manufacturer Part Number: 3065640
• Manufacturing: Made in Germany

Fits select 1996-2020 Toyota C-HR, Corolla iM, and RAV4.

H&R Trak+ DRM series wheel spacers widen your vehicle's track for a flush, aggressive stance and improved lateral stability. These 15mm spacers feature a hubcentric design that provides a full-contact hub extension, ensuring even load distribution and a vibration-free fitment that mirrors the factory geometry. The DRM series is designed to bolt directly to the existing vehicle hub using the included hardware, while the wheel is then secured to the high-strength studs integrated into the spacer itself.

Manufactured in Germany from a proprietary aluminum/magnesium alloy, these spacers possess a higher tensile strength than standard 6061-T6 billet aluminum while maintaining a lightweight profile. This specialized construction ensures long-term durability and resistance to the stresses of daily driving and performance use.

• Manufacturer Part Number: 3065602
• Thickness: 15mm
• Bolt Pattern: 5/114.3
• Center Bore: 60.1mm
• Thread Type: 12x1.5 Studs
• Material: Proprietary High-Strength Alloy
• Design: DRM Series (Bolts to Hub)
• Country of Origin: Germany

Fits select 1986-2015 Lexus and Toyota models, including GS, IS, LS, SC, Camry, Matrix, MR2, Solara, and Supra. These H&R Trak+ Wheel Spacers push your wheels out to be flush with the fender, instantly improving the vehicle's stance and lateral stability. By widening the track width, you achieve more than just an aggressive look; you improve handling characteristics and turn-in response.

H&R Trak+ spacers are manufactured from a proprietary aluminum/magnesium alloy specifically engineered for higher tensile strength than standard 6061-T6 billet. Every spacer is hubcentric, featuring a full-contact hub design—identical to the factory hub—to ensure even load force distribution and precise wheel centering. The DRS Series includes longer studs that must be swapped with the factory studs for a secure fitment.

• Thickness: 15mm
• Bolt Pattern: 5/114.3
• Center Bore: 60.1mm
• Stud Thread: 12x1.5
• Series: DRS
• Material: High-strength proprietary alloy
• Finish: Hard anodized for durability
• MPN: 30656014
• Origin: Made in Germany

Fits select 2004-2020 Subaru WRX and WRX STI models (5/114.3 bolt pattern).

H&R Trak+ Wheel Spacers widen your vehicle's track to improve lateral stability and provide a flush, aggressive stance. The DRS Series spacers are precision-engineered to fit between the wheel and the hub; they include extended-length wheel studs that must be pressed into the hub to ensure proper thread engagement and safety.

Manufactured in Germany from a proprietary lightweight aluminum/magnesium alloy, these spacers provide higher tensile strength than standard 6061-T6 billet aluminum. Every Trak+ spacer is hubcentric, featuring a full-contact hub face that mimics the factory hub design for precise load distribution and vibration-free performance.

• Series: Trak+ DRS
• Thickness: 15mm
• Bolt Pattern: 5/114.3
• Center Bore: 56mm
• Thread Type: 12x1.25
• Finish: Black
• Material: High-strength proprietary alloy
• Manufacturing: Made in Germany
• MPN: 30655600SW

Fits select 2008-2020 Audi A4, A5, A6, A7, A8, Q5, Q7, Q8, and S/RS performance variants, along with 2015-2019 Porsche Macan models.

H&R Trak+ DR Series Wheel Spacers are engineered to move your wheels out from the hub, creating a wider track for improved handling and a flush, aggressive stance. These DR Series spacers fit between the wheel and the hub and require the use of longer wheel bolts (sold separately) to ensure proper thread engagement.

Unlike generic spacers, Trak+ spacers are manufactured from a proprietary aluminum/magnesium alloy specifically developed for H&R. This material provides higher tensile strength than standard 6061-T6 billet aluminum while remaining exceptionally lightweight. The hubcentric design features a full-contact hub—matching the factory geometry—to ensure even load distribution and eliminate vibration.

• Thickness: 15mm
• Bolt Pattern: 5/112
• Center Bore: 66.5mm
• Thread Type: 14x1.5
• Finish: Black Anodized
• Hubcentric: Yes
• Manufacturer Part Number: 3055668SW
• Made in Germany

Fits select 2010-2020 Audi A6, A7, A8, Q5, Q7, Q8, RS5, RS7, S6, S7, S8, and SQ5 models.

H&R Trak+ DR Series Wheel Spacers widen the track of your vehicle to improve lateral stability and provide a flush, aggressive stance. These hubcentric spacers feature a full-contact hub design that replicates the factory mounting surface for even load distribution and precise wheel centering. Unlike generic spacers, Trak+ components are engineered from a proprietary aluminum/magnesium alloy specifically developed for H&R, offering higher tensile strength than standard 6061-T6 billet aluminum.

The DR Series spacers fit between the wheel and the hub, requiring longer wheel bolts for installation (sold separately). Each spacer is precision-machined for a perfect fit and features a hard-anodized finish for long-term durability and corrosion resistance. All Trak+ wheel spacers are manufactured in Germany to ensure the highest quality standards.

• Thickness: 15mm per side (30mm per axle)
• Bolt Pattern: 5/112
• Center Bore: 66.5mm
• Thread Pitch: M14 x 1.5
• Series: DR Series
• Material: Proprietary high-strength lightweight alloy
• Finish: Silver Anodized
• Origin: Made in Germany
• Manufacturer Part Number: 3055668

Fits select 1972-2020 Audi, Mercedes-Benz, and Chrysler models (5x112 bolt pattern, 66.5mm center bore).

H&R Trak+ DR Series Wheel Spacers widen your vehicle's track to push wheels flush with the fenders, providing an aggressive stance and improved lateral stability. These spacers are engineered to solve the common issue of wheels sitting too far inside the wheel well, which can detract from the vehicle's appearance and handling. Unlike generic spacers, these are hubcentric, featuring a full-contact hub face that mimics the factory geometry for precise load distribution and a vibration-free ride.

Each spacer is manufactured in Germany from a proprietary aluminum/magnesium alloy that offers higher tensile strength than standard 6061-T6 billet aluminum. The black anodized finish provides a stealthy look while protecting against corrosion and road salt.

• Thickness: 15mm per side
• Bolt Pattern: 5/112
• Center Bore: 66.5mm
• Thread Pitch: 14x1.5
• Finish: Black Anodized
• Material: Proprietary lightweight high-tensile alloy
• Series: Trak+ DR
• Manufacturer Part Number: 3055665SW

Note: DR Series spacers require longer wheel bolts (sold separately) for safe installation. Please verify your factory bolt seat type (Ball or Cone) and ensure the additional 15mm of length is added to your new hardware.

Fits select 2001-2018 Mercedes-Benz C-Class, CL, CLK, CLS, E-Class, S-Class, SL, and SLK-Class models. These H&R Trak+ DR Series wheel spacers widen the track of your vehicle by 15mm per side, moving the wheels out to sit flush with the fender for an improved stance and increased lateral stability.

Engineered for precision and safety, these hubcentric spacers feature a full-contact hub design that mirrors the factory geometry, ensuring even load distribution and eliminating vibration. Manufactured in Germany from a proprietary lightweight aluminum/magnesium alloy, they offer higher tensile strength than standard 6061-T6 billet aluminum.

• Thickness: 15mm
• Bolt Pattern: 5/112
• Center Bore: 66.5mm
• Thread Pitch: 12x1.5
• Series: Trak+ DR
• Material: High-tensile proprietary alloy
• Manufacturer Part Number: 30556659

Note: DR Series spacers fit between the wheel and hub and require longer wheel bolts (sold separately). Please verify bolt seat type and length before installation.

Fits 2013-2020 Mercedes-Benz GL-Class and GLS-Class (GL350, GL450, GL550, GL63 AMG, GLS450, GLS550, and GLS63 AMG).

Achieve a flush, aggressive stance and improved handling with H&R Trak+ DR Series Wheel Spacers. Designed to move your wheels 15mm outward, these spacers eliminate fender gap and increase lateral stability. Manufactured in Germany from a proprietary lightweight alloy with a higher tensile strength than 6061-T6 aluminum, these spacers are hubcentric to provide a full contact hub surface for vibration-free performance and even load distribution.

• Thickness: 15mm
• Bolt Pattern: 5/112
• Center Bore: 66.5mm
• Bolt Thread: 14x1.5
• Series: DR (Requires extended length wheel bolts)
• Material: High-strength proprietary aluminum/magnesium alloy
• Manufacturing: CNC machined in Germany
• Part Number: 30556650SW

Fits select 1972-2020 Audi, Chrysler, and Mercedes-Benz vehicles including A4, A5, Q5, S4, S5, Crossfire, and C/E/S-Class models.

H&R Trak+ DR Series Wheel Spacers widen your vehicle's track by 15mm, moving the wheels outward to sit flush with the fenders for a corrected stance and improved lateral stability. These hubcentric spacers feature a full-contact hub design that mirrors the factory geometry, ensuring even load distribution and a vibration-free fit. This specific DR Series kit is engineered for rear-axle fitment only and requires longer wheel bolts (sold separately) for proper installation.

Manufactured in Germany, Trak+ spacers are CNC-machined from a proprietary aluminum/magnesium alloy that provides higher tensile strength than standard 6061-T6 billet aluminum while reducing unsprung weight. Every spacer is hard-anodized for long-term durability and corrosion resistance.

• Thickness: 15mm
• Bolt Pattern: 5/112
• Center Bore: 66.5mm
• Bolt Thread: 14x1.5
• Series: DR Series (requires longer bolts)
• Placement: Rear Only
• Material: Proprietary High-Strength Lightweight Alloy
• Manufacturer Part Number: 3055665

Fits select 2014-2020 BMW and Mini models (5x112 bolt pattern, 66.5mm hub bore).

H&R Trak+ DR Series Wheel Spacers allow you to fine-tune your vehicle's track width by moving the wheels out 15mm. This creates a flush look with the fender, improving both the aesthetic stance and lateral stability. Unlike generic spacers, these are manufactured in Germany from a proprietary aluminum/magnesium alloy specifically engineered for higher tensile strength than standard 6061-T6 billet aluminum.

The hubcentric design features a full-contact hub that mimics the factory geometry, ensuring even load distribution and preventing the steering vibration often associated with non-hubcentric alternatives. The DR Series spacers fit between the wheel and the hub and require longer wheel bolts for a safe installation (sold separately).

• Thickness: 15mm
• Bolt Pattern: 5/112
• Center Bore: 66.5mm
• Thread Type: 14x1.25
• Finish: Black Anodized (SW)
• Design: Hubcentric for precise fitment and load support
• Material: High-tensile proprietary light alloy
• Manufacturing: Made in Germany
• MPN: 3055664SW

Fits select 2014-2020 BMW and Mini models, including 3-Series, 5-Series, 7-Series, X-Series, i3/i8, and Cooper variants (5/112 bolt pattern, 66.5mm center bore).

H&R Trak+ DR Series Wheel Spacers are engineered to widen the vehicle track, moving your wheels out to be flush with the fender for an improved stance and increased lateral stability. This DR Series spacer fits between the wheel and the hub and requires longer wheel bolts for installation (sold separately). By increasing the track width, these spacers provide improved handling characteristics and better clearance for aftermarket brake or suspension components.

Manufactured in Germany, Trak+ spacers are crafted from a proprietary aluminum/magnesium alloy that provides higher tensile strength than standard 6061-T6 billet aluminum. Every unit is hubcentric, featuring a full-contact hub face to ensure even load distribution and maintain the lateral support of the factory hub, which is critical for preventing wheel vibration at highway speeds.

• Width: 15mm
• Bolt Pattern: 5/112
• Center Bore: 66.5mm
• Thread Pitch: M14x1.25
• Series: Trak+ DR Series
• Construction: High-strength proprietary lightweight alloy
• Manufacturing: Made in Germany
• Part Number: 3055664

Fits select 1990-2020 Audi, Volkswagen, and Bentley models including A3, A4, A6, Jetta, Passat, and Continental (2.0T).

Enhance your vehicle's stance and handling with H&R Trak+ DR Series Wheel Spacers. These 15mm spacers move your wheels flush with the fender, widening the track for improved lateral stability and a more aggressive appearance. Unlike generic alternatives, Trak+ spacers are engineered from a proprietary lightweight aluminum/magnesium alloy that provides higher tensile strength than standard 6061-T6 billet aluminum.

These spacers are fully hubcentric, featuring a full-contact hub design that mirrors the factory geometry. This ensures even load distribution and eliminates the vibrations often associated with non-hubcentric spacers. Finished in a durable black coating, they offer a discrete look while resisting corrosion in harsh environments.

• Thickness: 15mm
• Bolt Pattern: 5/112
• Center Bore: 57.1mm
• Thread Type: 14x1.5
• Material: High-strength proprietary aluminum/magnesium alloy
• Finish: Black Anodized
• Series: DR Series
• Manufacturing: Made in Germany
• Manufacturer Part Number: 3055571SW