Increase your vehicle's track width and improve off-road stability with Borne Off-Road wheel spacers. These 25mm spacers provide the necessary clearance to run larger tires or wider wheels without rubbing against suspension components or inner wheel wells. Precision-engineered with an 8x170mm bolt pattern and a 125mm center bore, these spacers are designed for a precise fit that maintains hub-centric integrity to minimize vibration at highway speeds.

• Thickness: 25mm
• Bolt Pattern: 8x170mm
• Center Bore: 125mm
• Hardware: M14 pre-installed studs
• Finish: Durable Black
• Manufacturer Part Number: BNWS-002-250BK

Increase your vehicle's track width and improve its stance with Borne Off-Road 50mm wheel spacers. These spacers provide the necessary clearance to install larger tires while preventing contact with suspension or frame components. The hub-centric design with a 93.1mm bore ensures a precise, secure fitment that maintains wheel balance and reduces vibration.

Constructed for durability and finished in a resilient black coating, these spacers are built to withstand the rigors of off-road use. They come equipped with M12 studs to facilitate a direct installation on compatible hubs.

• Thickness: 50mm
• Bolt Pattern: 6x139.7
• Hub Bore: 93.1mm
• Stud Thread: M12
• Finish: Black
• Manufacturer Part Number: BNWS-001-500BK

Increase your vehicle's track width and improve off-road stability with Borne Off-Road Wheel Spacers. These spacers provide an additional 35mm of clearance, allowing you to fit larger tires or aftermarket wheels while preventing contact with suspension components or wheel wells. The hub-centric design ensures a precise fit by centering the wheel directly onto the hub, minimizing vibration for a smoother ride.

Constructed for durability in harsh environments, these spacers feature a sleek black finish to resist corrosion. Each unit comes with pre-installed M12 studs to maintain thread engagement and structural integrity. This is a direct bolt-on solution for vehicles sharing the 6x139.7 bolt pattern and 93.1mm hub bore.

• Manufacturer Part Number: BNWS-001-350BK
• Thickness: 35mm
• Bolt Pattern: 6x139.7
• Center Bore: 93.1mm
• Hardware Thread Pitch: M12
• Finish: Black

Borne Off-Road wheel spacers provide the necessary clearance and track width for aggressive tire fitment and improved off-road stability. These 30mm spacers are engineered to widen the vehicle's footprint, pushing the wheels further out to clear larger suspension components or to achieve a flush aesthetic with the fenders.

Precision-machined to match a 6x139.7 bolt pattern and a 93.1mm center bore, these spacers ensure a hub-centric fit to maintain wheel balance and minimize vibration during high-speed travel. The assembly features pre-installed M12 wheel studs and a durable black finish for corrosion resistance.

• Thickness: 30mm
• Bolt Pattern: 6x139.7
• Hub Bore: 93.1mm
• Stud Thread Pitch: M12
• Color: Black
• Manufacturer Part Number: BNWS-001-300BK

Increase your vehicle's track width and improve its stance with Borne Off-Road Wheel Spacers. These 25mm spacers provide the necessary clearance for larger tires or upgraded suspension components that might otherwise rub against the frame or control arms. Each spacer is engineered with a specific center bore to ensure a precise fit and reduce vibration at highway speeds.

• Thickness: 25mm
• Bolt Pattern: 6x139.7
• Center Bore: 93.1mm
• Stud Thread: M12
• Finish: Black
• Manufacturer Part Number: BNWS-001-250BK

Ensure a vibration-free connection between your BBS wheels and vehicle hub with the BBS Precision Fit System (PFS) Ring. This hub-centric adapter is engineered to bridge the gap between a 70mm wheel bore and a 57mm vehicle hub, specifically for select Volkswagen models featuring a 5x100 bolt pattern.

By centering the wheel perfectly on the hub rather than relying solely on the lug bolts, this BBS PFS ring eliminates steering wheel shimmy and promotes even tire wear. This is a genuine BBS component designed for a precise, snug fit into wheels equipped with the PFS bore, ensuring the wheel remains concentric to the hub during installation.

• Outside Diameter (OD): 70mm
• Inside Diameter (ID): 57mm
• Vehicle Application: Select VW with 5x100 bolt pattern
• System: BBS Precision Fit System (PFS)
• Manufacturer Part Number: X0923627

Achieve a precise, vibration-free mount for your BBS wheels with the BBS PFS (Precision Fit System) Centering Ring. This component is engineered to bridge the gap between an 82mm wheel bore and a 66.5mm vehicle hub, ensuring the wheel is perfectly centered for smooth rotation and optimal load distribution.

Specifically used on select Audi and BMW applications, the BBS PFS system allows for modular fitment across different hub diameters while maintaining the tight tolerances required for high-performance driving. Installing these rings is essential to prevent steering wheel shimmy and hub-related vibrations that can occur when using wheels with a larger center bore than the vehicle spindle.

• Outer Diameter (OD): 82mm
• Inner Diameter (ID): 66.5mm
• Manufacturer Part Number: X0923607
• Compatibility: Adapts 82mm BBS wheels to 66.5mm vehicle hubs

Ensure a vibration-free ride with the BBS PFS (Precision Fit System) Hub Centering Ring. This component is engineered to adapt BBS wheels featuring an 82mm bore to the 57mm hub assembly commonly found on select Volkswagen and Audi vehicles. By filling the gap between the wheel center bore and the vehicle hub, this ring ensures the wheel is perfectly centered, preventing wheel wobble and steering wheel oscillation at highway speeds.

• Manufacturer Part Number: X0923585
• Outer Diameter (OD): 82mm
• Inner Diameter (ID): 57mm
• System: BBS Precision Fit System (PFS)
• Function: Hub-centric conversion and centering

The BBS PFS system allows for modularity across different vehicle platforms, making it possible to fit specific wheel sets to various hub diameters by using the correct centering ring. This ring replaces worn, damaged, or missing PFS components to maintain factory-level tolerances and safety.

The BBS Precision Fit System (PFS) ring is an essential component for mounting BBS wheels with an 82mm center bore onto BMW vehicles with a 72.5mm hub. By filling the gap between the wheel's bore and the vehicle hub, this ring ensures the wheel is perfectly centered, eliminating the steering wheel vibrations often caused by lug-centric mounting.

This genuine BBS component (MPN X0923490) is machined to exacting tolerances to maintain a secure, hub-centric connection for a smoother, safer driving experience. It is designed to snap into the back of BBS PFS-specific wheels to adapt them to the factory BMW hub size.

• Outer Diameter (OD): 82mm
• Inner Diameter (ID): 72.5mm
• System: BBS Precision Fit System (PFS)
• Compatibility: Select BMW models with 72.5mm hubs
• Manufacturer Part Number: X0923490

Fits select Mercedes-Benz vehicles with a 66.5mm hub bore.

The BBS PFS (Precision Fit System) centering ring is a critical component for achieving a perfectly hub-centric fitment. This adapter ring allows BBS wheels featuring the standard 82mm PFS bore to mount securely and accurately onto the 66.5mm hubs common on Mercedes-Benz chassis. By ensuring the wheel is centered precisely on the hub rather than relying solely on the lug hardware, this ring helps eliminate high-speed vibrations and ensures even load distribution.

• Manufacturer Part Number: X0923444
• Outer Diameter (OD): 82mm (Fits BBS PFS wheel bore)
• Inner Diameter (ID): 66.5mm (Fits vehicle hub)
• System: BBS Precision Fit System (PFS)
• Application: Adapts PFS wheels to Mercedes-specific hub diameters

This genuine BBS PFS (Precision Fitment System) hub centric ring is engineered for select Nissan and Infiniti applications to provide a precise, vibration-free connection between your BBS wheels and the vehicle hub. By centering the wheel perfectly on the hub bore, this ring transfers the load away from the lug studs, ensuring a secure and balanced fitment.

• Outer Diameter (OD): 82mm (BBS Wheel Bore)
• Inner Diameter (ID): 66mm (Vehicle Hub Size)
• Material: High-tolerance durable alloy
• Manufacturer Part Number: X0923413

Using the correct BBS PFS hardware is essential for maintaining the performance and safety standards of your wheel assembly. This component is a direct replacement for lost or damaged rings in BBS wheels utilizing the PFS interchangeable system.

Fits select Toyota and Lexus models equipped with BBS wheels requiring a 60mm center bore adaptation.

This genuine BBS Precision Fit System (PFS) ring is engineered to ensure a vibration-free ride by perfectly centering your BBS wheel on the vehicle's hub. By filling the gap between the wheel's 82mm center bore and the vehicle's 60mm hub diameter, this centering ring maintains precise concentricity and prevents the mounting hardware from bearing the full load of the vehicle's weight.

• Manufacturer Part Number: X0923412
• Outer Diameter (OD): 82mm (BBS PFS Wheel Bore)
• Inner Diameter (ID): 60mm (Vehicle Hub Pilot)
• System: BBS Precision Fit System (PFS)
• Construction: High-strength composite or alloy for thermal stability
• Function: Eliminates steering wheel vibration by ensuring a hub-centric fit

Ensure a secure and vibration-free wheel setup with this genuine BBS PFS Retaining Clip (MPN X0923409). Designed specifically for BBS wheels utilizing the Precision Fit System (PFS), this 70mm spring-steel clip provides the necessary tension to lock the hub-centric centering ring firmly into the wheel's center bore.

Replacing a missing or fatigued clip is critical for maintaining a proper hub-centric fitment, which prevents wheel wobble and protects your wheel studs from shear stress. This clip is engineered to the exact tolerances required for BBS 70mm PFS rings, ensuring a snap-in installation and a reliable mechanical hold.

• Manufacturer Part Number: X0923409
• Compatible Diameter: 70mm PFS Centering Rings
• Material: High-tension spring steel for long-term retention
• Application: Secures PFS rings within BBS wheel hub bores

Fits Tesla Model 3 (Including Performance).

BBS PFS (Precision Fitment System) rings are engineered to provide a true hub-centric connection between BBS wheels and your vehicle's hub. This adapter ring converts an 82mm wheel bore to a 64.1mm vehicle hub diameter, ensuring the wheel is perfectly centered. Proper centering is critical for the Tesla Model 3 to eliminate high-speed vibrations and reduce shear stress on the wheel studs, especially under the high torque loads of Performance models.

• Outside Diameter: 82mm
• Inside Diameter: 64.1mm
• Manufacturer Part Number: 10023944
• Application: Tesla Model 3 (All trims)
• Engineered for BBS wheels utilizing the PFS interchangeable centering system
• Precision machined to tight tolerances for a secure, vibration-free fit

Fits select Subaru models with a 5x114.3 bolt pattern. This BBS PFS (Precision Fit System) kit is engineered to provide a true hub-centric connection between BBS wheels and your vehicle's hub, eliminating wheel vibration and ensuring proper load distribution.

This comprehensive hardware kit (MPN: 10.01.5003) includes everything needed to adapt BBS wheels with an 82mm center bore to the standard 56mm Subaru hub. The precision-machined rings and high-strength lug nuts maintain the strict tolerances required for performance driving and track use.

• BBS PFS Hub-Centric Rings: 82mm Outside Diameter (OD) to 56mm Inside Diameter (ID)
• Retaining Clips: 82mm snap-in style
• Complete set of application-specific lug nuts included
• Manufacturer Part Number: 10.01.5003

Fits select Audi vehicles with a 5x112 bolt pattern and 66.5mm center bore.

Correct your wheel offset and enhance your vehicle's stance with this BBS 10mm Wheel Spacer Kit (MPN: 09.50.361). These precision-engineered hub-centric spacers are designed specifically to interface with BBS wheels, ensuring a vibration-free fit and proper load distribution across the hub. The 10mm thickness provides additional clearance for larger brake calipers or a more flush fitment within the wheel well.

This kit includes a single spacer and five extended M14x1.5 lug bolts to ensure sufficient thread engagement. Please note that this hardware is designed exclusively for use with BBS wheels; verify compatibility with your specific wheel seat before installation.

• Thickness: 10mm
• Bolt Pattern: 5x112
• Center Bore: 66.5mm
• Thread Pitch: M14x1.5
• Includes: (1) Spacer and (5) Extended Lug Bolts
• MPN: 09.50.361

Fits select BMW and Mini models with a 5x112 bolt pattern. This BBS Precision Fit System (PFS) kit is engineered to provide a true hub-centric connection between your vehicle's hub and BBS wheels designed with an 82mm center bore. By filling the gap between the 66.5mm vehicle hub and the 82mm wheel bore, these rings eliminate high-speed steering wheel vibrations and ensure proper load distribution.

• Precision Fit: Specifically designed for BBS wheels with an 82mm bore.
• Hub-Centric Alignment: Reduces the center bore to a 66.5mm inner diameter for a factory-level fit.
• Complete Set: Includes the 82mm OD / 66.5mm ID hub ring and the necessary 82mm retention clip.
• MPN: 09.31.389

Ensure a vibration-free ride and precise wheel alignment with the BBS PFS (Precision Fit System) Kit. This kit is engineered to adapt BBS wheels featuring an 82mm bore to the 72.5mm hub diameter common on many BMW models. By centering the wheel perfectly on the hub, it eliminates the steering wheel shake often caused by lug-centric mounting.

This genuine BBS hardware kit replaces worn or missing centering components to maintain factory-level tolerances. The high-quality construction ensures durability under high heat and heavy cornering loads.

• Manufacturer Part Number: 09.31.368
• Outside Diameter (OD): 82mm
• Inside Diameter (ID): 72.5mm
• Included Hardware: 82mm Retaining Clip
• Application: Fits select BMW models with a 72.5mm hub bore

This BBS Precision Fit System (PFS) Kit is engineered for select Audi vehicles to provide a perfectly centered, vibration-free wheel interface. By adapting a BBS wheel's 82mm bore to the vehicle's specific 66.5mm hub diameter, this hardware ensures the wheel remains hub-centric rather than relying solely on the lug bolts for centering.

Unlike generic plastic centering rings, the BBS PFS system utilizes high-tolerance components and a secure retaining clip to stay seated during wheel changes. This kit includes the necessary application-specific lug bolts to ensure correct thread engagement and seat profile for your BBS wheels.

• BBS Precision Fit System (PFS) kit for Audi fitments
• Adapts 82mm wheel bore to 66.5mm vehicle hub
• Includes (1) 82mm OD / 66.5mm ID hub-centric ring
• Includes (1) 82mm retaining clip
• Includes vehicle-specific lug bolts
• Manufacturer Part Number: 09.31.360

Ensure a vibration-free ride and precise wheel centering with the BBS Precision Fitment System (PFS) Kit, manufacturer part number 09.31.151. This specialized hardware set is engineered to adapt BBS wheels featuring an 82mm center bore to the 66.5mm hub diameter standard on many Mercedes-Benz vehicles.

The BBS PFS system utilizes a high-quality interchangeable hub-centric ring and retaining clip design. Unlike generic spacers, this system provides a true hub-centric connection, transferring the load from the lug bolts to the hub for improved safety and smoother handling at highway speeds. This kit comes complete with the necessary lug bolts and hardware required for a secure installation.

• Manufacturer Part Number: 09.31.151
• Outer Diameter (OD): 82mm (Matches BBS PFS wheel bore)
• Inner Diameter (ID): 66.5mm (Matches Mercedes hub diameter)
• Included Hardware: 82mm Retaining Clip and vehicle-specific Lug Bolts

This BBS PFS (Precision Fit System) kit is designed to ensure a perfect hub-centric fitment for BBS wheels on select BMW vehicles with a 72.5mm hub diameter. By utilizing the BBS PFS system, you eliminate vibration caused by wheel-to-hub gaps, ensuring the wheel is centered purely by the hub rather than the lug bolts alone.

The 09.31.149 kit includes precision-machined centering rings that convert an 82mm wheel bore to a 72.5mm vehicle hub, along with the necessary retaining clips and a full set of lug bolts matched for this application.

• Manufacturer Part Number: 09.31.149
• Ring Specifications: 82mm Outside Diameter (OD) / 72.5mm Inside Diameter (ID)
• Clip Size: 82mm retaining clip
• Vehicle Fitment: Select BMW models with 72.5mm hub bore
• Included Hardware: BBS centering rings, retaining clips, and lug bolts

The BBS PFS (Precision Fitment System) kit provides the necessary hardware to achieve a true hub-centric fitment for BBS wheels on select Audi and Volkswagen vehicles. This system adapts an 82mm wheel bore to the 57mm hub diameter, ensuring the wheel is centered by the hub rather than the lug bolts alone. This precise alignment eliminates high-speed vibrations and ensures a secure, balanced mounting surface.

• Manufacturer Part Number: 09.31.138
• Adapts 82mm wheel bore to 57mm vehicle hub diameter
• Includes precision-machined 82mm OD / 57mm ID centering rings
• Includes 82mm retaining clips for secure ring seating
• Includes application-specific lug bolts for complete installation
• Designed for hub-centric wheel stability

Fits select 1994-2026 Audi, BMW, and Mercedes-Benz vehicles with a 5x112 bolt pattern and 66.6mm center bore.

aFe CONTROL billet wheel spacers provide a precision-engineered solution for improving vehicle stance, wheel fitment, and handling. By reducing the effective offset of your wheels, these 18mm spacers widen the track width for increased lateral stability and provide the necessary clearance for upgraded big brake kits or suspension components. The hub-centric design ensures a perfect load-bearing connection between the wheel and the hub, eliminating the vibration issues common with universal spacers.

Each spacer is CNC-machined from high-strength 6061-T6 aluminum and finished in a durable black anodize for superior corrosion resistance. To address the common issue of spacers seizing to the hub due to heat and debris, aFe includes integrated pry pockets for safe, damage-free removal. These spacers feature laser-etched sizing and logos for easy identification and a professional look.

• Thickness: 18mm
• Bolt Pattern: 5x112
• Center Bore: 66.6mm
• Material: CNC-Machined 6061-T6 Billet Aluminum
• Finish: Black Anodized
• Includes: Sold as a pair
• Features: Integrated pry pockets for easy removal; Hub-centric design
• Requirement: Requires longer wheel bolts or studs (Not Included)
• Manufacturer Part Number: 610-721003-B

Fits select 1994-2026 Audi, BMW, Mercedes-Benz, and Toyota models. aFe CONTROL wheel spacers provide an effective solution for improving vehicle aesthetics, functionality, and wheel fitment. By reducing the offset of your factory or aftermarket wheels, these spacers allow for a more aggressive stance and provide essential clearance for upgraded brake and suspension components. The increased track width also enhances handling and cornering stability.

These spacers are CNC-machined from 6061-T6 billet aluminum to extremely tight tolerances, ensuring precise fitment and long-term durability. The hub-centric design ensures the wheel is perfectly centered on the hub, allowing wheel loads to be transferred safely and eliminating the vibration often associated with lug-centric alternatives. To simplify maintenance, aFe has integrated pry pockets into the design, allowing for easy removal even after exposure to corrosion, debris, and heat buildup.

• CNC-machined 6061-T6 billet aluminum construction
• Precision hub-centric design for vibration-free performance
• Integrated pry pockets for easy removal from the hub
• Durable black anodized finish with laser-etched logo and sizing
• Bolt Pattern: 5x112
• Center Bore: 66.6mm
• Thickness: 15mm
• Quantity: Sold as a pair
• Note: Requires longer wheel bolts for installation (not included)
• Manufacturer Part Number: 610-721002-B

Fits select 1994-2026 Audi, BMW, and Mercedes-Benz models with a 5x112 bolt pattern and 66.6mm hub bore.

Improve your vehicle's stance, functionality, and wheel fitment with aFe CONTROL billet aluminum wheel spacers. By effectively lowering the offset of your factory or aftermarket wheels, these 12.5mm spacers allow you to dial in a more aggressive fitment and provide essential clearance for upgraded brake kits and suspension components. The resulting increase in track width directly improves handling and lateral stability.

Each spacer is CNC-machined in-house from high-strength 6061-T6 billet aluminum to exacting tolerances for a perfect fit. The hub-centric design ensures the wheels are perfectly centered, allowing wheel loads to be transferred to the hub to maintain a strong platform and eliminate high-speed vibrations. To simplify maintenance, integrated pry pockets provide a dedicated space to safely remove the spacers if they become stuck to the hub due to corrosion or heat buildup.

• Manufacturer Part Number: 610-721001-B
• Thickness: 12.5mm
• Bolt Pattern: 5x112
• Center Bore: 66.6mm
• Material: 6061-T6 Billet Aluminum
• Finish: Black Anodized
• Design: Hub-centric with integrated pry pockets
• Laser-etched logo and sizing for easy identification
• Sold as a pair
• Note: Requires longer wheel bolts for installation (not included)

Fits select 1990-2026 Audi and Volkswagen models (2.0T / 1.8T).

aFe CONTROL 20mm wheel spacers are a precision-engineered solution to improve the aesthetics, handling, and clearance of your vehicle. By effectively lowering the offset of factory or aftermarket wheels, these spacers allow for a more aggressive stance and provide essential clearance for upgraded brake or suspension components. The resulting increase in track width improves stability and cornering performance.

CNC machined from high-strength 6061-T6 billet aluminum, these spacers feature a hub-centric design that ensures the wheel is perfectly centered. This allows wheel loads to be transferred correctly to the hub, providing a stronger platform and eliminating the steering wheel vibration common with universal spacers. Integrated pry pockets are machined into the design to provide a safe leverage point for removal if the spacer becomes stuck due to heat or corrosion.

• Construction: CNC Machined 6061-T6 Billet Aluminum
• Finish: Corrosion-Resistant Black Anodized
• Thickness: 20mm
• Bolt Pattern: Dual 5x100 and 5x112
• Center Bore: 57.1mm
• Quantity: Sold as a Pair
• Design: Hub-centric with integrated pry pockets
• Markings: Laser-etched logo and sizing
• Manufacturer Part Number: 610-611004-B

Note: These spacers require longer wheel bolts or studs for safe installation, which are not included.

Fits select 1990-2026 Audi and Volkswagen models (1.8T / 2.0T). These aFe CONTROL wheel spacers are engineered to improve vehicle stance, wheel fitment, and handling performance. By effectively reducing the offset of your factory or aftermarket wheels, these spacers provide the necessary clearance for upgraded brake calipers or suspension components while increasing the track width for improved lateral stability.

Precision CNC-machined from high-strength 6061-T6 billet aluminum, these 10mm spacers feature a hub-centric design. This ensures the wheel is perfectly centered on the hub, allowing rotational loads to be transferred through the hub rather than the wheel bolts to eliminate vibrations. To solve the common issue of spacers seizing to the hub due to heat and corrosion, integrated pry pockets allow for safe removal without damaging the vehicle or the spacer surface.

• Thickness: 10mm
• Bolt Pattern: 5x100 and 5x112
• Center Bore: 57.1mm
• Material: CNC Machined 6061-T6 Billet Aluminum
• Finish: Black Anodized with Laser Etched Logo and Sizing
• Installation Note: Requires longer wheel bolts or studs (not included)
• Quantity: Sold as a pair (Set of 2)
• Manufacturer Part Number: 610-611001-B