Fits 2021-2024 Ram 1500 TRX (V8-6.2L SC).

The aFe Magnum FORCE Stage-2 Cold Air Intake System is engineered to maximize airflow and performance for the supercharged Ram TRX. At its core is a massive 18-inch tall, 360-degree radial flow air filter utilizing Pro 5R media. This five-layer, progressively finer oiled cotton gauze provides maximum airflow for street and track use, reinforced by expanded metal to prevent filter collapse under high-boost conditions.

The system features a durable, heat-soak resistant XLPE (cross-linked polyethylene) polymer housing. This open-element design is specifically sculpted to integrate with both the factory hood air inlet scoop and the grille inlet, ensuring a constant supply of cold air. The computer-designed, dyno-tuned intake tube is crafted for precise fitment and optimal flow while maintaining compatibility with all factory mounting locations for a secure, professional installation.

• Massive 18-inch tall 360-degree Pro 5R oiled cotton gauze air filter
• Durable XLPE housing utilizes factory hood scoop and grille air inlets
• Computer-designed, dyno-tuned intake tube maximizes airflow
• Heavy-duty stainless steel T-bolt clamps and premium silicone couplings
• Direct bolt-on installation using factory mounting points (approx. 60 minutes)
• Manufacturer Part Number: 54-13072R

Fits 2015-2020 BMW M3 and M4 models (Base, CS, and GTS). These aFe POWER Magnum FORCE Dynamic Air Scoops (D.A.S.) are engineered to lower intake air temperatures by capturing and forcing cool, high-pressure air from behind the front kidney grilles directly into the factory intake tracts. By increasing the volume of fresh air available, these scoops help improve throttle response and maintain performance during spirited driving.

Built for the harsh environment behind the grille, these scoops are CAD-designed from high-quality red linear low-density polyethylene (LLDPE). This material is selected for its extreme impact resistance, durability, and heat stability. The vibrant red finish provides a distinct performance aesthetic that is visible through the vehicle's kidney grilles.

Installation is straightforward and requires no permanent vehicle modifications. The scoops secure to the factory reinforcement support bar using the included plastic push-in rivets and are designed to maintain full compatibility with both factory intake systems and aFe POWER intake upgrades.

• Durable Construction: Made from impact-resistant, 100% recyclable LLDPE for long-term reliability.
• Temperature Reduction: Specifically designed to lower IATs by increasing cool air recovery.
• Hassle-Free Install: Bolts to factory mounting points with no cutting or drilling required.
• Compatibility: Works with OEM and aFe POWER intake systems.
• MPN: 54-13032SR

Fits 2010-2015 Chevrolet Camaro SS and 2012-2014 Chevrolet Camaro ZL1 (V8-6.2L).

The aFe MagnumFORCE Stage-2 Cold Air Intake System is engineered to replace the restrictive factory air box with a high-flow induction setup that maximizes airflow volume and velocity. This system utilizes a precision-molded plastic intake tube that is rotomolded to provide a smooth, aerodynamic path for air to travel from the filter to the engine, resulting in a 35% CFM flow gain over the stock intake. The 16-gauge powder-coated heat shield isolates the intake charge from engine bay heat and mounts directly to factory points without the need for cutting or drilling.

• Pro 5R Filter Media: Features a 360-degree, 5-layer washable and reusable cotton gauze filter for maximum airflow and engine protection.
• Optimized Airflow: Rotomolded plastic intake tube maintains high-velocity air delivery for improved throttle response.
• Heat Isolation: One-piece powder-coated steel heat shield blocks heat soak and directs cool air toward the filter.
• Easy Installation: Bolt-on design requires no vehicle modifications and uses existing mounting locations.

• Manufacturer Part Number: 54-11762
• Flow Increase: +35% CFM
• Filter Type: Pro 5R (5-Layer Cotton Gauze)
• Warranty: 2-Year Limited Warranty

Fits 1994-2002 Dodge Ram 2500 and 3500 (L6-5.9L / 6.7L).

The aFe POWER Quantum Pro 5R Cold Air Intake System (Part Number: 53-10001R) is engineered to optimize airflow for your Dodge Cummins truck. This system features a unique, patent-pending filter-to-housing interface that simplifies installation while ensuring a secure seal. The heart of the system is the Pro 5R air filter, a five-layer progressively finer medical-grade cotton gauze media that is washable and reusable, providing maximum airflow and performance.

Constructed from high-quality XLPE (cross-linked polyethylene), the roto-molded intake tube is designed to resist heat soak and maintain durability under extreme under-hood temperatures. The housing includes a built-in 3-angle velocity stack to smooth out turbulent air, directing it efficiently into the turbocharger. This kit includes heavy-duty stainless steel clamps and a silicone bellows coupling to handle engine movement and provide a long-lasting, leak-free connection.

• MPN: 53-10001R
• Filter Media: Pro 5R five-layer oiled cotton gauze
• Tube Material: Heat-resistant CAD-designed XLPE roto-molded plastic
• Design: Integrated filter-to-housing interface for easy maintenance
• Hardware: Includes premium stainless steel clamps and silicone bellows coupling
• Installation: Direct bolt-on design requiring no cutting or drilling

Fits 2015-2016 Dodge Challenger and Charger SRT Hellcat (V8-6.2L).

Maximize the performance of your supercharged Hellcat with the aFe Power Momentum GT Black Series intake. Engineered for superior airflow and thermal management, this system features a lightweight, high-gloss plain weave carbon fiber housing and intake tube. The unique one-piece sealed housing utilizes a patent-pending filter-to-housing interface and integrates directly with the factory headlamp cold air inlet on the driver's side to draw in the densest air available. A built-in clear sight window allows for quick filter inspections without disassembling the airbox.

This kit includes two performance air filters to suit your maintenance preference: the Pro 5R for maximum airflow and the Pro DRY S for oil-free convenience. Both filters feature a massive 6.75" x 4.75" oval flange and stand 8.5" tall to ensure high-capacity filtration. Installation is a straightforward bolt-on process that requires no cutting, drilling, or aftermarket tuning.

• Performance Gains: +37 HP / +33 lbs. x ft. Torque
• Flow Increase: Outflows factory intake by 13%
• Housing Material: Clear-coated plain weave carbon fiber
• Filter Types: Includes both Pro 5R (oiled) and Pro DRY S (dry) media
• Direct Fit: Mounts to factory locations and headlamp air inlet
• Manufacturer Part Number: 52-72204-CF

Fits select 2021-2026 Ford F-150, Expedition, and Lincoln Navigator models (V6-3.5L).

The aFe POWER Rapid Induction Cold Air Intake System is engineered to improve airflow and performance while maintaining ease of maintenance. This system features a high-quality, computer-designed, roto-molded intake tube made from heat-soak resistant XLPE (cross-linked polyethylene) to ensure durability and maximum power gains. The one-piece powder-coated heat shield is designed to snap onto the lower half of the factory air box, utilizing factory mounting locations for a straightforward installation that requires no cutting or drilling of OEM parts.

This system includes a 5-3/4" tall 360-degree radial flow air filter with a 5-1/2" flange. The Pro DRY S filter uses three layers of oil-free synthetic media, providing high filtration efficiency and dust holding capacity without the need for recharge oils. An inverted top design increases filter surface area to extend service intervals. For additional performance, this system is compatible with aFe POWER Dynamic Air Scoops (D.A.S.).

• Manufacturer Part Number: 52-10010D
• Filter Type: Pro DRY S oil-free 3-layer synthetic media
• Tube Material: Heat-resistant XLPE (cross-linked polyethylene)
• Heat Shield: Powder-coated one-piece steel
• Hardware Included: Premium stainless-steel clamps and silicone coupling
• Installation: Direct bolt-on utilizing factory mounting points
• Filter Dimensions: 5-3/4" height, 5-1/2" flange diameter

Fits 2010-2024 Toyota 4Runner and 2010-2014 Toyota FJ Cruiser (V6-4.0L) equipped with a Magnuson supercharger.

The aFe Momentum GT intake system is engineered around a custom, one-piece, roto-molded housing that manages airflow better than multi-component stock airboxes. Constructed from black cross-linked polyethylene (XLPE), this housing is highly resistant to engine bay heat soak. A unique, built-in clear sight window allows for quick filter inspections without disassembling the system, while an included urethane plug provides the option to completely seal the housing for maximum protection.

This system features a massive Pro DRY S performance air filter, utilizing three layers of progressively finer porosity synthetic media for oil-free convenience and high filtration efficiency. The filter-to-housing interface (US PAT 9440175) ensures a secure seal and easy installation. The system is completed with a dyno-tuned, roto-molded intake tube designed to achieve maximum power gains while maintaining precise factory-style fitment.

• Manufacturer Part Number: 51-76013
• Filter Type: Pro DRY S (3-Layer Oil-Free Synthetic Media)
• Housing Material: Black Cross-Linked Polyethylene (XLPE)
• Filter Dimensions: 7" x 4-3/4" Oval Flange, 8" Tall with Inverted Top
• Hardware Included: Premium stainless steel clamps and silicone coupling
• Installation: Bolt-on design requires no cutting or drilling of factory parts

Fits 2001-2004 Chevrolet Silverado and GMC Sierra 2500 HD/3500 (V8-6.6L LB7).

The aFe Momentum HD PRO 10R Stage-2 Si sealed air intake system is engineered using advanced CAD tools to deliver the optimal balance of power and engine protection for the LB7 Duramax. This system features a unique one-piece sealed housing with a built-in clear sight window for easy filter inspection. The intake utilizes a massive 1,000 CFM air filter with 10 layers of progressive cotton gauze oiled media, providing maximum filtration and flow for high-performance diesel applications.

• High-Flow Filtration: Includes a 360-degree radial flow PRO 10R air filter with a 6-inch flange and inverted top.
• Robust Construction: One-piece sealed housing reduces intake temperatures and features a patent-pending filter-to-housing interface.
• Premium Hardware: Equipped with heavy-duty stainless steel T-bolt clamps and a reinforced silicone coupler for a secure, durable seal.
• Airflow Versatility: Features an auxiliary air scoop with an included urethane plug for varied driving conditions.
• Serviceable Design: The 10-layer cotton gauze filter is fully washable and reusable for long-term service life.
• Manufacturer Part Number: 50-74001

Fits 2008-2010 Ford F-250 and F-350 Super Duty trucks equipped with the V8-6.4L Power Stroke diesel engine.

The aFe Power Momentum HD Stage-2 Si intake system is engineered for maximum airflow and filtration efficiency. Featuring a unique one-piece sealed housing with a built-in clear sight window for easy filter inspection, this system protects your engine from heat soak while delivering a steady supply of cool, dense air. At its core is the massive PRO 10R air filter, capable of flowing up to 1,000 cfm to meet the demands of high-output diesel applications.

• PRO 10R Filtration: 10 layers of progressive cotton gauze oiled media provide the highest level of protection and performance.
• Reinforced Construction: Filter is wrapped in reinforced metal mesh for maximum structural integrity under high boost.
• High Flow: 1,000 cfm 360-degree radial flow design maximizes available air volume.
• Direct Fit: Designed to bolt into factory mounting points with premium hardware and a unique filter-to-housing interface.
• MPN: 50-73004

Fits 2025 Ram 2500 and 3500 models equipped with the 6.7L Cummins turbo diesel engine.

The aFe POWER Momentum HD intake system is engineered to meet the high airflow demands of the 6.7L Cummins engine while providing maximum protection. This sealed intake system features a rotomolded, heat-resistant XLPE housing that blocks out engine heat and contaminants. The integrated clear sight window allows for quick filter inspections without requiring disassembly. A dyno-tuned intake tube ensures smooth, laminar airflow to the turbocharger, optimizing power and torque delivery across the RPM range.

This system includes the massive Pro 10R air filter, featuring ten layers of oiled cotton gauze media. This high-performance media provides maximum filtration efficiency for fine dust and debris while maintaining high flow rates. The innovative filter-to-housing interface ensures a secure seal and simplifies the installation process. The system is completed with premium stainless-steel worm-gear clamps and a reinforced silicone coupler for long-term durability under heavy boost and high heat.

• Manufacturer Part Number: 50-70137T
• Filter Type: Pro 10R 10-Layer Oiled Cotton Gauze
• Housing Material: Heat-Resistant XLPE (Cross-linked Polyethylene)
• Hardware Included: Stainless-steel clamps and silicone coupler
• Features: Built-in clear sight window and filter-to-housing interface
• Patents: 9440175, 10252202, 10532304, 11219850, 11331607, 11376536, 11135538, 11745129

Fits 2025 Ram 2500 and 3500 (L6-6.7L).

The aFe POWER Momentum HD cold air intake system is engineered to provide the 6.7L Cummins turbo diesel engine with maximum airflow and superior filtration. This system replaces the restrictive factory intake with a sealed, rotomolded housing made from heat-resistant cross-linked polyethylene (XLPE) to block out engine heat and deliver a cooler, denser air charge. The innovative filter-to-housing interface ensures a secure fit, while a clear sight window allows for instant filter inspection without disassembling the airbox.

The system features a dyno-tuned intake tube designed to optimize airflow velocity and volume straight to the turbocharger. Included is the Pro DRY S air filter, which uses three layers of oil-free synthetic media for high-efficiency filtration and easy maintenance. The installation is completed with premium stainless-steel clamps and a custom-made silicone coupler for lasting durability and flexibility.

• Manufacturer Part Number: 50-70137D
• Filter Type: Pro DRY S (3-Layer Synthetic, Oil-Free)
• Housing Material: Heat-resistant XLPE (Cross-linked Polyethylene)
• Hardware Included: Stainless-steel clamps and silicone coupler
• Patented Design: Covered by patents 9440175, 10252202, 10532304, 11219850, 11331607, 11376536, 11135538, and 11745129

Fits 2024-2026 Volkswagen Atlas and Atlas Cross Sport (L4-2.0L).

The aFe Momentum GT Cold Air Intake System is engineered to provide maximum airflow and protection for your Volkswagen Atlas. This system features a unique, sealed housing made from cross-linked polyethylene (XLPE) that resists impact and high engine bay temperatures. The housing includes a clear sight window, allowing for quick filter inspections without requiring disassembly of the intake. To further reduce intake temperatures, an included aluminum heat shield panel deflects hot air from the turbocharger, while the system utilizes the factory air inlet for maximum efficiency.

At the core of this system is a 7.5-inch tall, 360-degree radial flow air filter. This Pro 5R media features five layers of progressively finer cotton gauze to balance maximum performance and engine safety. The intake uses a flexible, three-layer nylon-reinforced silicone intake tube with an internal aluminum insert to ensure a secure, leak-free connection to the air filter.

• Manufacturer Part Number: 50-70128R
• Filter Media: Washable and reusable Pro 5R 5-layer oiled cotton gauze
• Housing Construction: Heat-resistant Cross-Linked Polyethylene (XLPE) with clear sight window
• Intake Tube: 3-layer nylon-reinforced silicone with internal aluminum insert
• Components: Includes stainless-steel clamps and a silicone coupling
• Installation: Direct bolt-on to factory mounting locations with no additional hardware required

Fits 2020-2025 Ford Explorer models equipped with the L4-2.3L engine.

Optimize the performance of your Ford Explorer with the aFe Power Momentum GT Cold Air Intake System. This system features a smooth, one-piece sealed housing manufactured from heat-resistant cross-linked polyethylene (XLPE), which is designed to resist heat soak and protect the intake charge from engine bay temperatures. The innovative filter-to-housing interface reduces the number of components for a streamlined installation, while the integrated clear sight window allows for quick filter inspections without disassembling the airbox.

At the core of this system is the Pro 5R air filter, a 360-degree radial flow filter featuring five layers of progressively finer oiled cotton gauze media. This design delivers maximum airflow for performance gains while maintaining high filtration efficiency. The intake is completed with a computer-designed, dyno-tuned intake tube, premium silicone coupling for flexibility, and high-quality stainless-steel clamps for a secure, leak-free seal.

• Filter Media: Pro 5R 5-layer progressively finer oiled cotton gauze
• Housing Material: Heat-resistant cross-linked polyethylene (XLPE)
• Hardware Included: Stainless-steel clamps and premium silicone coupling
• Installation: Utilizes factory mounting locations for a secure, bolt-on fit
• Filter Inspection: Large clear sight window for hassle-free monitoring
• Manufacturer Part Number: 50-70108R

Fits select 2003-2024 Toyota 4Runner and 2007-2014 FJ Cruiser (V6-4.0L).

The aFe Power Momentum GT Pro 5R Cold Air Intake System is engineered to maximize airflow and performance for Toyota’s 4.0L V6 engine. This system features a unique, one-piece sealed housing made from heat-resistant cross-linked polyethylene (XLPE), which incorporates a patented filter-to-housing interface (US PAT 9440175). A large, clear sight window allows for quick filter inspections without requiring disassembly, while an auxiliary air inlet provides the option for additional airflow or can be sealed using the included plug.

At the heart of this system is an 8” tall, 360-degree radial flow air filter utilizing Pro 5R media. This pre-oiled, five-layer progressively finer cotton gauze media delivers maximum airflow for street and track performance. The system also includes a computer-designed, dyno-tuned intake tube with a built-in resonance chamber to manage intake noise on 2010 and newer models. Installation is straightforward, utilizing factory mounting points with no cutting or drilling required.

• MPN: 50-70095R
• Filter Media: Pro 5R 5-layer pre-oiled cotton gauze for maximum performance
• Housing: Heat-resistant XLPE one-piece sealed housing with sight window
• Intake Tube: Dyno-tuned XLPE tube with resonance chamber (2010+ models)
• Hardware: Includes premium bellows coupling and stainless-steel T-bolt clamps
• Installation: Direct fit using factory mounting points; no modifications necessary
• Filter Dimensions: 8" tall 360-degree radial flow filter with inverted top

Fits 2021-2025 Ford Bronco models (V6-2.7L).

The aFe Power Momentum GT cold air intake system is engineered to optimize airflow and protection for the Ford Bronco's twin-turbocharged V6. This system features a smooth, one-piece sealed housing constructed from heat-resistant cross-linked polyethylene (XLPE), which effectively resists heat soak and maintains cooler intake temperatures. The housing includes a large, clear sight window for easy filter inspection and incorporates the factory air inlet scoop to maximize cold air delivery.

Performance is driven by the 360-degree radial flow Pro DRY S air filter. This oil-free filter utilizes three layers of synthetic media for excellent filtration efficiency and dust-holding capacity, making it ideal for street and light off-road use. The computer-designed, dyno-tuned intake tubes ensure precise fitment and improved flow characteristics, while premium stainless-steel clamps and silicone couplings provide a secure, leak-free seal.

• Manufacturer Part Number: 50-70081D
• Filter Media: Pro DRY S (3-layer oil-free synthetic)
• Housing Material: Heat-resistant XLPE (Cross-linked Polyethylene)
• Hardware Included: Stainless-steel clamps and premium silicone couplings
• Installation: Utilizes factory mounting locations with no cutting or drilling required
• Design: Innovative filter-to-housing interface for simplified installation

Fits select 2021-2026 Ford F-150, Expedition, and Lincoln Navigator models (V6-3.5L).

Optimize your engine's breathing with the aFe Power Momentum GT Pro 5R cold air intake system. Engineered to outflow the factory intake by 58%, this system is measured at 780 CFM at 7" H2O for significant performance improvements. The heart of the system is a 9" tall, 360-degree radial flow air filter featuring Pro 5R media—five layers of progressively finer cotton gauze that provide maximum airflow and filtration for street use.

The system features a one-piece sealed housing made from heat-resistant cross-linked polyethylene (XLPE), which uses a patent-pending filter-to-housing interface to minimize hardware and simplify installation. A large, clear sight window allows for quick filter inspections without teardown, while the intake tube is computer-designed and dyno-tuned to maximize power gains. The housing integrates directly with factory air inlets and uses a premium silicone seal to block out hot engine bay air.

• Manufacturer Part Number: 50-70072R
• Flow Rate: 780 CFM @ 7" H2O (58% increase over stock)
• Filter Media: Washable, pre-oiled Pro 5R (5-layer cotton gauze)
• Housing Material: Heat-soak resistant XLPE (Cross-linked Polyethylene)
• Hardware Included: Stainless-steel clamps and premium silicone couplings
• Installation: Direct bolt-on utilizing factory mounting points and air inlets

Fits select 2019-2024 Mini Cooper, Cooper Clubman, Cooper Countryman, and BMW 228i Gran Coupe, X1, and X2 models (L4-2.0L Turbo).

The aFe POWER Momentum GT intake system is engineered to optimize airflow and thermal management for BMW and Mini 2.0L turbo engines. The system centers around a custom, CAD-designed housing made from heat-resistant XLPE (cross-linked polyethylene), which protects the intake charge from engine bay heat soak. This sealed, one-piece housing features a patent-pending filter-to-housing interface that reduces the number of components for a simplified installation and a large, clear sight window for easy filter inspections without disassembly.

Air is drawn through a 6-1/2" tall, 360-degree radial flow Pro DRY S filter. This filter uses three layers of oil-free synthetic media, providing maximum convenience for street use while maintaining high filtration efficiency. The intake also features a dyno-tuned XLPE intake tube, premium bellows couplings for engine movement flexibility, and high-quality stainless-steel worm clamps. This system is designed to bolt directly to factory mounting locations and is compatible with the factory strut bar.

• Manufacturer Part Number: 50-70068D
• Filter Type: Oil-free Pro DRY S 3-layer synthetic media
• Housing Material: Heat-resistant XLPE (Cross-linked Polyethylene)
• Filter Dimensions: 6-1/2" tall with 3-1/2" round flange
• Included Hardware: Stainless-steel worm clamps and bellows coupling
• Installation: Utilizes factory mounting points; no cutting or drilling required
• Compatibility: Confirmed fit with factory strut bars

Fits select 2020-2023 Jeep Wrangler (JL) and Gladiator (JT) models (V6-3.0L).

Optimize the performance of your EcoDiesel with the aFe Power Momentum HD intake system. This kit is engineered around a massive 8-inch tall, 360-degree radial flow air filter featuring the Pro 10R media. With ten layers of progressively finer cotton gauze, the Pro 10R is afe's most robust filtration option, specifically designed to provide maximum dust holding capacity for demanding off-road environments. The filter's reinforced metal cage prevents collapse under high boost, ensuring reliable airflow to your V6-3.0L engine.

The system features a one-piece, roto-molded housing made from heat-resistant cross-linked polyethylene (XLPE). This design uses a patented filter-to-housing interface that simplifies installation by reducing the number of components. A clear sight window allows for quick filter inspections without opening the airbox, while a soft EPDM hood seal prevents hot engine bay air from entering the intake tract. The CAD-designed intake tube is dyno-tuned to maximize flow, delivering a measured 23% increase over the factory intake assembly.

• Manufacturer Part Number: 50-70062T
• Flow Increase: Outflows factory intake by 23%
• Filter Media: Pro 10R 10-layer pre-oiled cotton gauze for maximum filtration
• Housing Material: Heat-resistant XLPE roto-molded polyethylene
• Filter Dimensions: 8" tall with 4" round flange
• Hardware Included: EPDM hood seal, high-quality clamps, and couplings
• Installation: Direct bolt-on to factory mounting points; no cutting or drilling required

Fits 2019-2024 Ram 2500 and 3500 models equipped with the L6-6.7L Cummins turbo diesel engine.

The aFe POWER Momentum HD cold air intake system is engineered for maximum filtration and airflow in heavy-duty diesel applications. This system features a sealed, one-piece housing made from heat-resistant cross-linked polyethylene (XLPE) to protect the intake charge from engine bay heat soak. A large, clear sight window allows for quick filter inspections without requiring any disassembly of the system.

At the core of this system is the Pro 10R air filter. This 9-inch tall, 360-degree radial flow filter utilizes 10 layers of progressively finer cotton gauze media, providing maximum dust-holding capacity and filtration efficiency for off-road or high-dust environments. The patented filter-to-housing interface (US PAT 9440175) uses minimal hardware for a simplified 30-minute installation and ensures a secure, airtight seal. The intake tube is computer-designed and dyno-tuned to optimize airflow velocity while maintaining precise fitment.

• Pro 10R Media: 10-layer pre-oiled cotton gauze for maximum filtration and performance.
• High-Quality Construction: Durable XLPE housing and intake tube resist heat and impact.
• Premium Hardware: Includes stainless steel T-bolt clamps and a flexible silicone bellows coupling.
• Factory Integration: Connects to the factory air inlet scoop and features an optional auxiliary air inlet with a provided plug.
• MPN: 50-70051T

Fits 2018-2023 Ford Mustang EcoBoost and EcoBoost Premium (L4-2.3L).

The aFe Power Momentum GT Cold Air Intake System is engineered to optimize airflow and maximize performance for the EcoBoost Mustang. The system centers around a unique, one-piece sealed housing made from heat-resistant cross-linked polyethylene (XLPE) that incorporates the factory air inlet and an auxiliary intake to capture cool air from the inner fender. A large, clear sight window allows for quick filter inspections without disassembling the airbox.

• Pro 5R Filter Media: Features a 360-degree radial flow, 8-inch tall air filter with a 5-inch flange. The five layers of pre-oiled, progressively finer cotton gauze provide maximum airflow for street and track use.
• Dyno-Tuned Intake Tube: The computer-designed XLPE tube is dyno-tuned to achieve maximum power gains while maintaining a precise fit and resisting heat soak.
• Premium Hardware: Includes high-quality T-bolt clamps and silicone couplings for a secure, long-lasting installation.
• Direct Fit: Designed to utilize factory mounting points, requiring no cutting or modifications to your vehicle.
• Manufacturer Part Number: 50-70050R

Fits 2015-2020 Ford F-150 models (King Ranch, Lariat, Platinum, SSV, XL, and XLT).

Optimize your truck's airflow with the aFe Power Momentum XP intake system. This kit replaces the restrictive factory airbox with a high-efficiency roto-molded housing made from heat-soak resistant cross-linked polyethylene (XLPE). By utilizing a unique filter-to-housing interface, this system maximizes filter surface area and air volume for a cooler, denser intake charge. The housing includes a clear sight window, allowing for quick filter inspections without disassembling the unit, and bolts directly to factory mounting points for a straightforward installation.

Air is delivered through dual 3-inch mandrel-bent aluminum tubes finished in a durable wrinkle-black powder coat. These tubes merge into a single outlet via a reinforced silicone coupling, providing an unrestricted path to the throttle body. The system features a large Pro DRY S air filter, utilizing three layers of oil-free progressive synthetic media for maximum convenience and filtration efficiency. Each kit is rounded out with premium stainless-steel worm-gear clamps for a secure, corrosion-resistant seal.

• One-piece roto-molded XLPE housing captures air directly from the front of the vehicle
• Dual 3-inch wrinkle-black mandrel-bent aluminum intake tubes
• Pro DRY S 3-layer oil-free synthetic media is washable and reusable
• Clear sight window for easy filter maintenance checks
• Reinforced silicone coupling and stainless-steel hardware included
• Manufacturer Part Number: 50-30024D

Fits 2002-2009 Dodge Ram 1500 (V8-4.7L). This fitment includes SLT, ST, Laramie, SXT, TRX, and TRX4 submodels.

The aFe Power Silver Bullet throttle body spacer is engineered to improve off-idle torque and throttle response by optimizing the air intake path. This spacer increases the intake manifold volume by lengthening the intake track, which helps pull a higher volume of air into the combustion chamber. The unique serrated/helix design creates air turbulence at the point of entry, ensuring a more complete fuel atomization and improved efficiency. This specialized serrated design also eliminates the high-pitched whistling noise often associated with standard helix-only spacers.

Each spacer is precision CNC-machined from high-strength T-6061 billet aluminum for a perfect fit and long-term durability. This kit provides a straightforward bolt-on performance upgrade for your truck's intake system.

• Constructed from T-6061 billet aluminum
• Unique serrated/helix design for optimized airflow
• Up to +10 HP and +14 ft./lbs. torque gains
• Increases intake track length for better throttle response
• Eliminates annoying intake whistling common with other spacers
• Includes a 2-year limited warranty
• Manufacturer Part Number: 46-32004

Fits 2013-2015 Chevrolet Spark LS and LT models (1.2L).

Unlock hidden performance in your Chevy Spark with the Injen SP Series cold air intake. This flagship system features a mandrel-bent 6061-T6 aluminum intake tube finished in black, providing a smooth, high-velocity path for airflow. Using patented MegaRam (MR) Technology, Injen engineers have tuned this intake to optimize air/fuel ratios, delivering dyno-proven gains of up to 5 hp and 4 lb-ft of torque without the need for aftermarket tuning.

The kit comes equipped with a SuperNano-Web dry air filter, offering high-efficiency filtration and increased surface area for maximum flow. Designed for durability and ease of installation, this intake replaces the restrictive factory airbox and provides an aggressive, throaty engine tone under full throttle.

• Patented MegaRam (MR) Technology (Patents 7,359,795 & 7,669,571) for precise air/fuel tuning
• Mandrel-bent 6061-T6 aluminum intake tubing with black finish
• Dyno-proven gains: Up to 5 HP and 4 lb-ft torque
• Includes fully serviceable SuperNano-Web dry air filter
• CARB EO #: D-476-8 (Applies to 2013 model years only)
• Replacement air filter: X-1010-BB
• Optional hydroshield: 1035BLK / 1035RED
• Injen Technology Limited Lifetime Warranty
• Made in Pomona, California, USA
• Manufacturer Part Number: SP7080BLK

Fits 2018-2023 Kia Stinger GT, GT1, GT2, GTS, and Tribute Edition models equipped with the 3.3L Twin Turbo engine.

The Injen SP series is a high-performance short ram intake system engineered to optimize airflow for the Kia Stinger. Built around dual 6061-T6 aluminum intake tubes, this system features a precision-stepped design transitioning from 3.00in to 2.50in to 2.25in to maintain velocity and eliminate factory restrictions. Utilizing Injen's patented MegaRam (MR) Technology, the intake is tuned to provide significant power gains while ensuring safe air-fuel (A/F) ratios throughout the entire RPM range without the need for additional tuning.

This system comes equipped with fully serviceable Injen SuperNano-Web dry air filters, which offer superior filtration efficiency without the need for oil. Hand-crafted in Pomona, California, the SP1350P delivers an aggressive engine tone under load and features a polished finish for a clean, professional aesthetic under the hood.

• Dyno-proven gains of up to 21 hp and 18 lb-ft of torque
• Dual 6061-T6 aluminum intake tubing with polished finish
• Patented MegaRam (MR) Technology for A/F ratio stability
• Includes SuperNano-Web dry air filters (Replacement Part: X-1078-BB)
• Compatible with optional hydroshield (Part: 1120BLK)
• Manufacturer Part Number: SP1350P
• Injen Technology Limited Lifetime Warranty
• Made in the USA

Note: This product is not currently CARB exempt and is not available for purchase in California or for use on any vehicle registered with the California Department of Motor Vehicles.

Fits 2020-2025 BMW M240i, M340i, and M440i models including xDrive and Gran Coupe.

The Injen SP Series short ram air intake system provides significant performance overhead for the BMW B58 engine. This system is engineered around a massive 4.00-inch O.D. mandrel-bent T6-6061 aluminum intake tube, which replaces restrictive factory plumbing with a smooth, high-velocity air path. Dyno testing on a stock tune resulted in gains of up to 19 horsepower and 18 lb-ft of torque, providing improved throttle response and an aggressive engine note under load.

This kit includes an application-specific heat shield designed to isolate the air filter from radiant engine bay heat, ensuring cooler intake charges. It features the SuperNano-Web dry air filter, which offers high-flow filtration without the need for oiling. Hand-TIG welded and finished in high-luster polished aluminum, this system combines a premium under-hood aesthetic with precise OE-style fitment.

• Dyno-proven gains of up to 19 hp and 18 lb-ft torque
• 4.00-inch O.D. mandrel-bent 6061-T6 aluminum tubing
• Includes custom heat shield and mounting hardware
• SuperNano-Web dry air filter (X-1026-BB) is fully serviceable
• Maintains safe air/fuel ratios on factory engine calibration
• Hand-TIG welded construction for maximum durability
• Manufacturer Part Number: SP1140P
• Note: Not CARB exempt; not for sale or use in California

Fits 2004-2006 Mitsubishi Lancer Ralliart.

The Injen Technology RD Series performance cold air intake is designed to unlock significant bolt-on power by drawing cooler, denser air from outside the engine bay. The heart of the RD1833P system is the mandrel-bent 6061-T6 aluminum intake tube, which provides a smooth, uninterrupted path for high-velocity airflow. This design ensures safe air-fuel (A/F) ratios throughout the powerband without the need for aftermarket tuning.

Equipped with a fully serviceable Injen SuperNano-Web dry air filter, this intake provides superior filtration efficiency and increased surface area for maximum flow. On the dyno, this system has demonstrated gains of up to 11 hp and 10 lb-ft of torque. Proudly manufactured in Pomona, California, this kit delivers an aggressive, throaty engine tone under full throttle and is backed by a limited lifetime warranty.

• Dyno-proven gains: Up to 11 hp and 10 lb-ft of torque
• Mandrel-bent 6061-T6 aluminum intake tubing for maximum flow
• SuperNano-Web dry air filter (Replacement Part: X-1013-BB)
• CARB EO Number: D-476-8 (California Street Legal)
• Compatible with optional Hydroshield (Part Numbers: 1033BLK / 1033RED)
• Polished finish for enhanced engine bay aesthetics
• Made in the USA
• Manufacturer Part Number: RD1833P

Fits 1994-2001 Acura Integra GS-R.

The Injen RD Series performance cold air intake is engineered to deliver dyno-proven power gains by positioning the air filter deep within the engine bay to draw in the coolest, densest air charge possible. Constructed from 6061-T6 mandrel-bent aluminum, the RD1450P eliminates factory intake restrictions with a smooth, uninterrupted airflow path. This system provides an aggressive, throaty engine tone under full throttle while maintaining safe air/fuel ratios without the need for additional tuning.

This intake kit features the Injen SuperNano-Web dry air filter, which provides high-efficiency filtration and maximum airflow without the use of oil. Designed and manufactured in Pomona, California, this system is 50-state emissions legal and carries a Limited Lifetime Warranty.

• Performance: Up to 11.9 HP gain
• Material: 6061-T6 mandrel-bent aluminum tubing
• Finish: Polished
• Filter Type: SuperNano-Web Dry Air Filter (Replacement PN: X-1013-BB)
• Emissions Status: CARB EO #: D-476-3 (50-State Legal)
• Compatible Accessories: Hydroshield PN 1033BLK or 1033RED
• Manufacturing: Made in Pomona, CA USA
• Warranty: Injen Technology Limited Lifetime Warranty

Fits 2011-2023 Dodge Durango and Jeep Grand Cherokee models (5.7L V8).

Optimize your HEMI's performance with the Injen Power-Flow (PF) intake system. Engineered to deliver cool, dense air to the engine, this system features mandrel-bent 6061-T6 aluminum tubing that eliminates restrictive factory ducting. The filter is strategically positioned to minimize heat soak, ensuring lower intake air temperatures and an aggressive engine tone under load. This kit is a direct-fit bolt-on that requires no additional tuning for operation.

• Performance Gains: Dyno-proven increases of up to 11 hp and 10 lb-ft of torque.
• Filtration: Includes a fully serviceable Injen SuperNano-Web dry air filter (Replacement Part: X-1026-BB).
• Construction: High-quality 6061-T6 polished aluminum intake piping for maximum durability and airflow.
• Emissions: CARB EO# D-476-10 (Applies to 2011-2019 model years only).
• Origin: Designed and manufactured in Pomona, California, USA.
• Maintenance: Compatible with optional hydroshield (Part numbers 1037BLK or 1037RED).
• Warranty: Backed by Injen Technology’s Limited Lifetime Warranty.

Fits select 2005-2023 Toyota Tacoma models including Base, Pre Runner, SR, and SR5 (2.7L).

Optimize your Tacoma's performance with the Injen Power-Flow (PF) air intake system. This kit is engineered to deliver cool, dense air to the 2.7L engine by positioning the filter away from engine-generated heat. Constructed from mandrel-bent 6061-T6 aluminum, the intake tubing eliminates factory restrictions to improve airflow velocity and volume. The system features Injen's patented MegaRam (MR) and Air Fusion technologies, which tune the intake to maintain safe air/fuel ratios without the need for aftermarket ECU tuning. This system has been dyno-proven to provide gains of up to 7 horsepower and 6 lb-ft of torque.

The kit includes a fully serviceable SuperNano-Web dry air filter, providing high-efficiency filtration without the mess of oiling. A universal heat shield is included to further isolate the intake from under-hood heat soak. Every Power-Flow system is manufactured in Pomona, California, and is backed by a limited lifetime warranty.

• 6061-T6 aluminum intake tubing with Wrinkle Black finish
• Patented MegaRam (MR) and Air Fusion Technology
• SuperNano-Web dry air filter (Replacement Part: X-1014-BB)
• Universal heat shield included
• No additional tuning required for operation
• Dyno-proven gains: +7 HP / +6 lb-ft torque
• Manufacturer Part Number: PF2011WB
• Made in the USA

Note: This product is not currently CARB exempt and is not legal for sale or use in California.

Fits 2001-2003 Lexus GS430, LS430, and SC430 (V8-4.3L). Upgrade your Lexus engine bay with the Injen IS Series Performance short ram intake, engineered to deliver bolt-on power and improved throttle response without the need for aftermarket tuning.

Built from mandrel-bent T6-6061 aluminum, the IS2095BLK intake tube replaces restrictive factory piping with a smooth, high-flow path for incoming air. This system is designed to maintain safe air-fuel (A/F) ratios throughout the powerband while producing an aggressive, throaty engine note under acceleration. The kit includes Injen’s SuperNano-Web dry air filter, which provides superior filtration and increased surface area for maximum flow without the maintenance of oiled filters.

• T6-6061 mandrel-bent aluminum intake tubing for maximum airflow
• Black powder-coated finish for durability and a clean engine bay aesthetic
• Fully serviceable SuperNano-Web dry air filter (Replacement Part: X-1014-BB)
• CARB EO Number: D-476-4 for emissions compliance
• Compatible with optional hydroshields (Part Numbers 1033BLK or 1033RED)
• Manufactured in Pomona, California
• Includes Injen Technology Limited Lifetime Warranty
• Manufacturer Part Number: IS2095BLK