The Fel-Pro 1245 Intake Manifold Gasket Set is engineered specifically for the real-world repair environment, providing a reliable seal even on imperfect or pitted sealing surfaces. These gaskets utilize proprietary materials and specialized design features to compensate for surface irregularities, preventing vacuum leaks and coolant seepage that often occur with standard replacement gaskets.

• Sealing Technology: Features proprietary materials and unique design elements to ensure a superior seal on worn or aged components.
• Repair Focused: Engineered specifically to solve sealing challenges on used cylinder heads and intake manifolds.
• Complete Kit: Includes the gaskets and necessary components required to perform a comprehensive intake manifold gasket replacement.
• Engineering Excellence: Designed, reviewed, and validated by Fel-Pro engineers through rigorous research and development.
• Application Tested: Parts are real-world tested to ensure optimal performance and long-term durability.
• Part Number: 1245

The Fel-Pro 1243 Engine Intake Manifold Gasket Set is engineered specifically for the aftermarket repair environment to deliver a reliable seal on imperfect or worn surfaces. This set utilizes proprietary materials and unique design features to address the real-world challenges of sealing intake manifolds where standard gaskets might struggle.

• Proprietary Sealing Technology: Features exclusive innovations and materials designed to ensure a superior seal during critical engine repairs.
• Surface Compensation: Specifically manufactured and engineered to help seal imperfect or pitted sealing surfaces often found in used engines.
• Validated Engineering: Parts are designed, reviewed, and approved by Fel-Pro engineers through rigorous research and development to ensure professional-grade performance.
• Installation Efficiency: Designed to save time and simplify the job, these gaskets solve common OE design issues and enhance overall durability.
• Manufacturer Part Number: 1243

The Fel-Pro 1242 Performance Intake Manifold Gasket Set is engineered for high-performance applications featuring aluminum cylinder heads with non-conventional port and bolt locations. These gaskets are specifically manufactured with proprietary materials to deliver a reliable seal on imperfect surfaces common in real-world repair and racing environments.

Built without a metal core, the 1242 set allows engine builders to custom-trim the gaskets for an exact fit on modified ports. This gasket set is designed to solve customer complaints regarding OE design issues while enhancing long-term durability. It has been extensively tested with a wide range of aftermarket cylinder head and intake manifold combinations to ensure consistent performance.

• Trimmable Core: Designed without a metal core to allow for precise port matching on modified engines.
• Installer's Advantage: Engineered to save time and simplify installation while addressing sealing issues on high-performance heads.
• Optimized Design: Features no exhaust crossover openings or blocking shields.
• Compatibility: Tested with various aftermarket cylinder head and intake manifold combinations.
• Note: Not intended for use on emission-controlled vehicles.

• Manufacturer Part Number: 1242
• Application: Performance Aluminum Heads
• Construction: Proprietary metal-core-free composite

The Fel-Pro 1229 Engine Intake Manifold Gasket Set is engineered specifically for the repair environment, providing a dependable seal on surfaces that may no longer be perfectly flat. Utilizing proprietary materials and exclusive sealing technologies, this set addresses common OE design issues to prevent vacuum leaks and ensure long-term durability under real-world operating conditions.

• Sealing Innovation: Features proprietary materials and unique design elements to compensate for imperfect sealing surfaces.
• Installer's Advantage: Engineered to save time and simplify the repair process while solving common customer complaints regarding manifold leaks.
• Engineering Expertise: Each component is designed, reviewed, and validated by Fel-Pro engineers through rigorous research and development.
• Tested Performance: Validated through on-vehicle testing to ensure optimal performance and a precise fit.
• Manufacturer Part Number: 1229

Fits select 1970-1974 vehicles with 4-barrel cylinder heads.

The Fel-Pro 1228 Performance intake manifold gasket set is engineered for high-performance engine building and the demanding repair environment. These gaskets are constructed without a metal core, specifically to allow engine builders to trim the material for a precise port match on modified intake manifolds and cylinder heads. To ensure a reliable vacuum seal even on imperfect surfaces, this set features Printoseal technology—elastomeric sealing beads that provide increased localized pressure around the intake ports.

• Precision-engineered for performance 4-barrel cylinder heads
• Trimmable design without a metal core for custom port matching
• Printoseal elastomeric beads enhance sealing strength at the intake port
• Specifically formulated for the real-world repair environment
• Manufacturer Part Number: 1228
• Note: Not intended for use on emission-controlled vehicles

The Fel-Pro 1218 Intake Manifold Gasket Set is engineered specifically for the real-world repair environment, providing a dependable seal even on imperfect or worn mating surfaces. Constructed with proprietary materials and unique design features, this set addresses common sealing issues found in high-mileage or high-stress applications where factory tolerances may no longer be present.

• Sealing Technology: Utilizes exclusive innovations and proprietary materials to ensure a superior, long-lasting seal.
• Repair Environment Focus: Specifically designed to compensate for surface irregularities and pitting on heads or intake manifolds.
• Installer's Advantage: Engineered to simplify installation and solve OE design issues, enhancing overall durability and longevity.
• Validated Performance: Each part is designed, reviewed, and approved by Fel-Pro engineers through rigorous research and on-vehicle testing.
• Complete Solution: This gasket set includes the components necessary to complete the repair, ensuring you have the right parts for the job.

As a trusted leader in sealing solutions, Fel-Pro part number 1218 is built to professional standards, restoring manifold integrity and preventing vacuum or coolant leaks.

The Fel-Pro 1210 Performance Intake Manifold Gasket Set is engineered for the rigors of the repair environment, specifically designed to provide a reliable seal on imperfect mounting surfaces. Utilizing proprietary materials and exclusive sealing technologies, this set addresses common sealing challenges found in high-mileage and performance engines where surface flatness may no longer meet factory specifications.

Each gasket set is validated by Fel-Pro engineers through extensive research and development to ensure durability and a precise fit. The 1210 set is designed to save time during installation by resolving OE design issues and preventing vacuum or coolant leaks that can lead to poor engine performance.

• Sealing Innovation: Uses proprietary materials and unique design features to ensure a superior seal on worn or uneven surfaces.
• Engineering Expertise: Parts are designed, reviewed, and validated by Fel-Pro engineers for performance and longevity.
• Complete Repair Solution: Includes the gaskets necessary for a full intake manifold service (MPN 1210).
• Real-World Tested: Validated on-vehicle to ensure optimal performance and a leak-free finish.

The Fel-Pro 1207 Intake Manifold Gasket Set is specifically engineered for the real-world repair environment, providing a dependable seal for Chevrolet Small Block 262, 265, 267, and 283 engines. These gaskets are designed to compensate for imperfect sealing surfaces frequently found on older or high-mileage cylinder heads and manifolds, preventing vacuum leaks and coolant seepage.

• Fits Chevrolet Small Block 262, 265, 267, and 283 engines
• Gasket Thickness: 0.060 in
• Engineered for imperfect sealing surfaces to ensure a superior seal on aging components
• Utilizes proprietary materials and unique design features for enhanced durability
• Includes all necessary gaskets for a complete intake manifold repair unless otherwise noted
• Tested on-vehicle to validate fitment and performance in various driving conditions
• Manufacturer Part Number: 1207

This Fel-Pro 1205 intake manifold gasket set is engineered specifically for Small Block Chevy engines, providing a dependable seal in high-performance or high-mileage repair environments. Designed to compensate for imperfect sealing surfaces, these gaskets utilize proprietary materials and unique design features to ensure a leak-free installation.

Whether you are dealing with minor surface irregularities or performing a standard manifold swap, Fel-Pro Performance gaskets provide the durability and precision fit required for the real-world repair environment. This set includes the necessary components to complete the intake manifold sealing process.

• Precision Port Dimensions: Features 2.09 in x 1.28 in port openings with a .060 in thickness for precise fitment.
• Optimized for Repair: Engineered to seal warped or pitted surfaces common in used engine blocks and aftermarket manifolds.
• Proprietary Sealing Technology: Manufactured with specialized materials to ensure a superior seal under varying thermal conditions.
• Installer's Advantage: Designed to save time and solve common sealing issues encountered during engine assembly.
• Manufacturer Part Number: 1205

The Fel-Pro 1203 Performance intake manifold gasket set is engineered for high-demand racing applications and modified engines where standard OE gaskets fall short. These gaskets feature a specialized construction without a metal core, specifically designed to allow engine builders to trim and port-match the gasket material for a precise fit on modified or custom intake ports.

To ensure a reliable seal on imperfect surfaces, this set utilizes Fel-Pro Printoseal technology. These elastomeric sealing beads are applied to the intake ports to provide concentrated sealing pressure and compensate for minor surface irregularities. Built for performance, this Race Port set is designed without exhaust crossover openings or blocking shields, making it ideal for aftermarket cylinder head and intake manifold combinations where maximum flow and temperature management are required.

• Manufacturer Part Number: 1203
• Port Design: Race Port (no exhaust crossover openings)
• Core Material: No metal core for custom trimming and port matching
• Sealing Technology: Printoseal elastomeric beads for enhanced intake port sealing
• Compatibility: Tested for fitment with wide-ranging aftermarket head and intake combinations
• Application Note: Not intended for use in emission-controlled vehicles

The Fel-Pro 1200 intake manifold gasket set is engineered specifically for the high-demand repair environment, providing a reliable seal on aged or imperfect surfaces. Utilizing proprietary materials and design features, these gaskets address real-world sealing challenges that standard replacements may not solve.

• Designed for Imperfect Surfaces: Engineered to compensate for surface irregularities and pitting often found in used engine components.
• Exclusive Sealing Materials: Features proprietary technologies that ensure a superior, long-lasting seal during thermal expansion and contraction cycles.
• Complete Repair Solution: This set includes the necessary gaskets required to perform a full intake manifold service.
• Engineer Validated: Rigorously tested and approved for fitment and durability by Fel-Pro specialists.
• Manufacturer Part Number: 1200

Fits 2004-2013 Volvo C30, C70, S40, and V50 models equipped with the T5 Turbo engine.

The do88 Performance Intake System is designed to eliminate the flow restrictions inherent in the factory air box and inlet piping. By providing a more direct and efficient path to the turbocharger, this system improves throttle response and supports higher power levels on the Volvo P1 platform. This kit replaces the stock intake assembly with high-flow components engineered to handle increased boost and airflow demands.

• Direct fit for Volvo T5 Turbo applications
• Optimized air flow path to reduce pressure drop
• Replaces restrictive factory air box and plumbing
• Engineered for durability under high engine bay temperatures
• Manufacturer Part Number: LF-130-V50

Fits Volvo S60R and V70R models.

The do88 turbo inlet hose is a high-performance upgrade designed to replace the restrictive and aging factory intake pipe. Unlike the original rubber hose, which is prone to perishing or collapsing under high vacuum, this do88 version is constructed from multi-layer reinforced silicone. This ensures the hose maintains its structural integrity and internal diameter even during aggressive throttle applications.

By smoothing out the internal airflow path to the turbocharger, this inlet hose reduces turbulence and improves induction efficiency. It is a direct-fit solution that bolts to factory mounting points, making it an essential maintenance and performance upgrade for the P2 chassis R-models.

• Reinforced silicone construction prevents hose collapse under high boost/vacuum
• Smooth internal surface for optimized airflow to the turbocharger
• Superior heat resistance and durability compared to OE rubber
• Finish: Black
• Manufacturer Part Number: DO88-KIT96S

Fits select 2005-2012 BMW 323i, 325i, 328i, and 330i E9X models (N51/N52/N53 engines).

The do88 Intake Resonator Delete (DO88-KIT232-1B) replaces the restrictive factory intake bellows and resonator assembly with a smooth-bore silicone hose. By eliminating the factory resonator box, this kit reduces air turbulence and improves the path to the throttle body, resulting in sharper throttle response and a more aggressive induction note under load. This is a direct replacement for the factory rubber component, designed to withstand engine bay heat while providing a more durable and efficient solution for naturally aspirated E9X engines.

• Specifically designed for E90, E91, E92, and E93 3-Series models
• High-temperature multi-layer reinforced silicone construction
• Smooth internal surface reduces air turbulence compared to OE bellows
• Vibrant blue finish for an upgraded engine bay aesthetic
• Replaces factory part numbers associated with the resonator intake tract
• Manufacturer Part Number: DO88-KIT232-1B

Upgrade your BMW's intake system with the do88 reinforced silicone inlet hose, designed specifically for the 2001-2006 BMW 330i (E46) equipped with the 3.0L M54B30 engine. This component is a direct-fit replacement for the factory rubber intake boot, which is notorious for hardening and cracking over time, leading to unmetered air leaks, rough idling, and check engine lights.

• Fits 2001-2006 BMW 330i (E46) with 3.0L M54 engine.
• Constructed from high-grade multi-layer reinforced silicone for maximum durability against heat and engine bay cycles.
• Smooth internal profile eliminates the corrugated design of the OE hose to minimize air turbulence.
• Resistant to vacuum collapse under high load.
• Finish: Black silicone for an OEM-plus look.
• Manufacturer Part Number: DO88-KIT230-1S

Fits 2001-2006 BMW 325i (E46) equipped with the 2.5L M54B25 engine.

This do88 inlet hose is designed as a direct replacement for the failure-prone factory intake boot. Original rubber hoses are susceptible to drying out and cracking over time, which causes unmetered air leaks, poor idling, and decreased engine performance. This reinforced inlet hose is engineered to withstand the extreme heat and vacuum cycles of the BMW E46 engine bay, ensuring a lasting seal and consistent airflow.

• Direct fit for 2001-2006 BMW 325i (E46)
• Optimized for the 2.5L M54B25 engine
• Replaces cracking or leaking original intake boots
• Durable construction maintains structural integrity under vacuum
• Finish: Black
• Manufacturer Part Number: DO88-KIT229-1S

Fits 2001-2006 BMW 325i (E46) equipped with the 2.5L M54B25 engine.

This do88 throttle body hose is engineered to replace the factory rubber intake boot, which is a common failure point on the E46 chassis. Over time, the original equipment (OE) rubber becomes brittle and develops cracks, leading to unmetered air leaks, poor idling, and lean codes. This reinforced silicone version provides superior resistance to heat and aging, ensuring a reliable seal and consistent intake performance for the life of the vehicle.

• Direct-fit replacement for the factory throttle body hose
• Constructed from multi-layer reinforced silicone for maximum durability
• Smooth internal surface reduces turbulence compared to aged, ribbed rubber hoses
• Finished in black for a clean, factory-style appearance under the hood
• Manufacturer Part Number: DO88-KIT225-1S

Fits 2001-2006 BMW 325i (E46) equipped with the 2.5L M54B25 engine.

This do88 performance silicone throttle body hose is a direct-fit replacement for the factory rubber unit. Original equipment hoses are prone to drying out and cracking over time, leading to unmetered air leaks and poor engine performance. Constructed from high-temperature silicone, this hose provides superior durability and resistance to heat cycles, ensuring a consistent seal for the intake system.

• Direct replacement for the factory throttle body hose
• High-grade silicone construction for increased longevity
• Resistant to heat-induced cracking and degradation
• Maintains consistent airflow and prevents vacuum leaks
• Engine Compatibility: 2.5L M54B25
• Manufacturer Part Number: DO88-KIT225-1B

Fits 2001-2006 BMW 330i (E46) models equipped with the 3.0L M54B30 engine.

This do88 silicone throttle body hose is a heavy-duty replacement for the factory rubber intake boot. Over time, the original equipment (OE) rubber becomes brittle, leading to cracks that cause vacuum leaks, unmetered air entry, and rough idling. This reinforced silicone alternative is engineered to withstand engine bay heat cycles far better than standard rubber, maintaining a consistent seal and ensuring your M54 engine receives a steady, reliable air supply.

• Direct replacement for the factory throttle body hose
• Multi-layer reinforced silicone construction for superior durability
• Resistant to high temperatures and vacuum collapse
• Smooth internal bore to minimize air turbulence
• Finish: Black
• Manufacturer Part Number: DO88-KIT220-1S

Fits select 2010-2013 BMW 135i and 335i models (E82, E88, E90, E91, E92, E93) equipped with the N55 engine.

This do88 performance turbo inlet hose is engineered to replace the restrictive and often brittle factory plastic intake pipe. By providing a smoother internal flow path and a consistent 47mm diameter at the turbocharger connection, this hose reduces pressure drop and optimizes airflow for improved throttle response and turbo efficiency. Constructed from high-temperature reinforced silicone, it is designed to withstand significant heat and vacuum without collapsing or cracking over time.

• Specifically designed for N55 turbochargers with a 47mm inlet
• Multi-layer reinforced silicone construction for superior durability
• Smooth internal surface to minimize air turbulence
• Direct replacement for the OEM plastic inlet pipe
• Manufacturer Part Number: DO88-KIT213S-47

This do88 silicone intake inlet hose is a performance-oriented replacement for the factory rubber component on Porsche 911 Carrera (996 and 997.1) C2 and C4 models. It is designed to overcome the limitations of the original equipment, which can perish, crack, or collapse under vacuum as it ages.

Constructed from high-grade, multi-layer reinforced silicone, this inlet hose provides superior resistance to engine bay heat and maintains its structural integrity under load. The smooth internal profile reduces air turbulence compared to the corrugated factory design, ensuring a more consistent flow of air to the engine. This kit is a direct-fit solution that bolts onto the factory locations using standard hardware.

• Direct replacement for the restrictive factory rubber inlet hose
• Multi-layer silicone construction for enhanced durability and heat resistance
• Smooth internal bore optimizes airflow efficiency
• Retains factory fitment and sensor locations where applicable
• Manufacturer Part Number: DO88-KIT201S

Fits 1988-1995 BMW M5 (E34) equipped with the 3.6L or 3.8L engines.

The factory rubber throttle body hose on the E34 M5 is a known failure point, often becoming brittle and cracking after decades of heat cycles. These cracks cause vacuum leaks, leading to unmetered air entering the engine, which results in rough idling, hesitation, and poor throttle response. This do88 silicone hose is a direct-fit replacement designed to withstand higher temperatures and pressure compared to standard automotive rubber.

• Replaces the aging factory rubber intake/throttle body hose
• Constructed from high-grade multi-layer reinforced silicone for maximum durability
• Superior resistance to heat-aging and ozone degradation compared to OEM
• Designed to fit the factory intake system without modification
• Manufacturer Part Number: DO88-KIT113S

Fits 1992-1994 BMW M3 (E36) equipped with the 3.0L S50B30 engine.

This do88 silicone throttle body hose is a high-performance upgrade designed to replace the factory rubber unit. Standard OE hoses are notorious for drying out, hardening, and cracking over time due to engine bay heat cycles, which leads to unmetered air leaks and erratic idling. This do88 hose is constructed from multi-layer reinforced silicone, providing superior thermal resistance and long-term durability compared to stock components.

• Precision-engineered for direct fitment to the factory throttle body
• Multi-layer reinforced silicone construction resists collapsing and cracking
• High-temperature resistance for sustained engine bay heat exposure
• Smooth internal surface to optimize airflow into the intake
• Manufacturer Part Number: DO88-KIT110S
• Color: Black

Fits 2011-2014 Ford Mustang GT (5.0L).

This Corsa Performance cold air intake is engineered to optimize airflow volume and velocity while shielding the intake charge from power-robbing engine bay heat. By utilizing a closed-box design, this system significantly reduces intake temperatures compared to open-element filters. The air ducts feature larger diameters and sculpted, smooth transitions to maximize the engine's breathing capabilities.

• Thermal Stability: Heavy-duty silicone connectors provide superior flexibility and strength while maintaining performance under high engine bay temperatures.
• Marine-Grade Hardware: Includes high-quality marine-grade clamps for a secure, durable seal across a wide operating range.
• Reusable Filter: Comes with a pre-oiled, cleanable air filter designed for long service life and improved engine efficiency.
• Direct Fit: Includes all necessary hardware and installation instructions for a straightforward bolt-on upgrade.
• Made in the USA: Manufactured with precision and backed by a Limited Lifetime Warranty.
• Manufacturer Part Number: 49750

Fits select 2019-2023 Ram 1500 (5.7L) models including Big Horn, Laramie, Rebel, and Tradesman.

The CORSA Performance Cold Air Intake System is engineered to optimize airflow and engine protection for your vehicle. By replacing the restrictive factory intake, this system outflows stock setups to improve engine efficiency and throttle response. This kit features Corsa's DryTech 3D filtration technology, a high-flow, non-oiled media that provides nearly 98% filtration efficiency. This low-maintenance design allows for up to 50,000 miles between cleanings; simply vacuum or rinse with soap and water to restore peak performance.

The system includes a rugged airbox designed to shield the filter from engine heat and road debris, topped with a smoked acrylic see-through lid for easy inspection. Installation is a straightforward bolt-on process that can be completed in under an hour using standard hand tools.

• Part Number: 46557D-1
• Filter Type: DryTech 3D (Non-Oiled)
• Airbox Lid: Smoked Acrylic
• Efficiency: Up to 98%
• Maintenance Interval: Up to 50,000 miles
• Warranty: Manufacturer Lifetime Warranty
• Origin: Made in the USA

Fits select 2018-2023 Chevrolet Silverado 1500, Suburban, and Tahoe, plus GMC Sierra 1500, Yukon, and Yukon XL models (5.3L).

The CORSA Performance Cold Air Intake system is engineered to maximize airflow and engine protection for late-model GM trucks and SUVs. This system replaces the restrictive factory airbox with a high-flow unit featuring a smoked acrylic see-through lid for easy filter inspection. At the heart of the system is the Donaldson Powercore Ultra-Web filter, which utilizes sub-micron fibers to capture 99.96% of contaminants, providing superior filtration in dry and dusty off-road conditions.

Designed for enthusiasts who demand longevity, the Powercore filtration technology offers maintenance-free performance for up to 150,000 miles. This bolt-on upgrade installs in under an hour using standard hand tools and factory mounting points.

• Donaldson Powercore Ultra-Web Filtration: 99.96% efficient
• Maintenance-free air filtration for up to 150,000 miles
• Smoked acrylic see-through airbox lid
• Rugged housing designed to shield the filter from engine heat
• Simple bolt-on installation; typically installs in under 1 hour
• Manufacturer Part Number: 459536
• Made in the USA
• Lifetime Warranty

Fits select 2019-2023 Chevrolet Silverado 1500, Suburban, Tahoe and GMC Sierra 1500, Yukon, Yukon XL (5.3L V8).

CORSA Performance Cold Air Intake systems are engineered to maximize airflow by replacing restrictive factory plumbing with a high-flow induction path. This system features a Volant high-performance 5-layer oiled cotton gauze air filter, constructed from premium textiles pleated between durable aluminum screens. Pre-oiled and ready for immediate use, the filter is designed to provide a high flow rate for power gains while maintaining long service intervals of up to 40,000 miles, depending on driving conditions.

The airbox is built for durability and includes a signature smoked acrylic see-through lid, allowing for easy filter inspection without disassembly. Designed for a straightforward installation, this bolt-on system can typically be installed in under one hour using standard hand tools.

• Direct bolt-on installation; typically installs in under 1 hour
• Rugged airbox design protects the filter from engine heat and debris
• Smoked acrylic see-through lid for quick filter visual checks
• Volant 5-layer oiled cotton gauze filter for maximum airflow and protection
• Filter service intervals up to 40,000 miles
• Proudly made in the USA
• Manufacturer Part Number: 45953
• Limited Lifetime Warranty

Fits 2016-2023 Chevrolet Camaro SS models equipped with the 6.2L LT1 V8 engine.

The CORSA Performance Carbon Fiber air intake (MPN 44018D) combines lightweight multi-layer carbon fiber with advanced engineering to optimize airflow and improve under-hood aesthetics. This open-element system replaces the restrictive factory intake ducting with a smooth-bore 1x1 traditional twill weave carbon fiber tube, delivering dyno-proven increases of up to 9 HP and 9 lb-ft of torque at 5375 RPM without requiring a custom ECU tune.

Engineered for maximum durability, this kit includes a black powder-coated aluminum heat shield that seals against the hood to isolate the intake from engine bay heat. The included DryTech 3D synthetic fiber filter provides 99% filtration efficiency and high-flow performance without the need for oil, simplifying maintenance while protecting your 6.2L engine.

• Multi-layer 1x1 traditional twill weave carbon fiber construction
• Black powder-coated aluminum heat shield blocks radiant engine heat
• DryTech 3D oil-free synthetic fiber high-flow air filter
• 99% filtration efficiency for superior engine protection
• Premium hardware including multi-ply silicone hoses and T-bolt style clamps
• Direct bolt-on installation typically completed in under an hour
• No ECU tune required for performance gains
• Manufacturer Part Number: 44018D
• Backed by Corsa's Limited Lifetime Warranty (1-year warranty on filters)

Fits 2016-2023 Chevrolet Camaro SS (6.2L V8).

The CORSA Performance Limited Edition carbon fiber air intake for the Gen 6 Camaro SS balances lightweight aesthetics with precision engineering. Constructed from multi-layer 1x1 twill weave carbon fiber, the optimized intake duct replaces the restrictive factory plastic unit to maximize airflow to the 6.2L LT1 engine. This system is dyno-tuned to deliver gains of up to 9 HP and 9 lb-ft of torque at 5375 RPM without requiring an ECU re-flash or tune.

This open-element system includes a black powder-coated aluminum heat shield designed to seal flush against the hood, effectively isolating the intake from ambient engine bay heat. It comes equipped with the MaxFlow 5 reusable oiled cotton gauze filter, providing 99% filtration efficiency for superior engine protection. Installation is a straightforward bolt-on process that can typically be completed in under an hour using the included premium hardware.

• Manufacturer Part Number: 44018
• Construction: 1x1 Traditional Twill Weave Carbon Fiber
• Filter Type: MaxFlow 5-Layer Oiled Cotton Gauze
• Performance: +9 HP and +9 lb-ft TQ at 5,375 RPM
• Heat Shield: Black Powder Coated Aluminum
• Hardware: Multi-ply silicone hoses and T-bolt style clamps included
• Installation: Bolt-on, no tune required
• Warranty: Limited Lifetime (Intake); 1-Year (Filter)

Fits select 2021-2023 Chrysler 300 and Dodge Challenger/Charger (5.7L).

The CORSA Performance carbon fiber air intake (MPN 44017D) combines lightweight 100% carbon fiber construction with advanced engineering to optimize airflow for the 5.7L HEMI engine. By replacing the restrictive factory airbox with an optimized 1x1 twill carbon fiber duct and a high-performance DryTech 3D filter, this system delivers measurable power gains without the need for an aftermarket tune. The included carbon fiber heat shield is designed to seal flush against the hood, effectively blocking engine bay heat to ensure a cooler, denser air charge reaching the intake.

• Precision-engineered 1x1 twill carbon fiber construction for strength and thermal efficiency
• DryTech 3D high-flow synthetic performance air filter requires no oil for maintenance
• Dyno-proven gains of up to 15 HP @ 5250 RPM and 18 lb-ft of torque @ 4000 RPM
• Premium hardware including multi-ply silicone hoses and stainless steel T-bolt clamps
• Simple bolt-on installation typically completed in under an hour
• Manufacturer Part Number: 44017D
• Backed by a Limited Lifetime Warranty (1-year warranty on filters)