Fits 2005-2006 Chevrolet SSR (V8-6.0L).

The K&N 57 Series FIPK (Fuel Injection Performance Kit) replaces your vehicle's restrictive factory air filter and intake housing to provide a more direct path for airflow. This system features a rotationally-molded high-density polyethylene (HDPE) intake tube, designed to increase the volume of air delivered to the engine for a measurable boost in performance and improved throttle response. The kit is paired with a custom heat shield to help protect the intake air from high engine bay temperatures, ensuring a cooler, denser intake charge.

• Washable Filter: Includes an oversized, conical High-Flow Air Filter made from oiled cotton media for superior filtration and airflow.
• Long Service Life: Designed to go up to 100,000 miles between filter cleanings under normal highway driving conditions.
• HDPE Construction: The rotationally-molded tube is built for durability and heat resistance compared to standard plastic housings.
• Easy Installation: Engineered to bolt onto factory mounting points; the entire system can typically be installed in 90 minutes or less.
• Manufacturer Part Number: 57-3055

Fits 1999-2002 Chevrolet Camaro and Pontiac Firebird (V6-3.8L).

The K&N 57 Series FIPK (Fuel Injection Performance Kit) replaces the restrictive factory air filter and intake housing in your 3.8L V6. This system features a rotationally-molded high-density polyethylene (HDPE) tube designed to smooth and straighten airflow, providing a cooler, more oxygen-rich charge to the engine for a guaranteed increase in horsepower and torque.

This performance intake kit includes an oversized, conical High-Flow Air Filter utilizing oiled cotton media. Engineered for exceptional filtration and airflow, the washable, reusable filter can go up to 100,000 miles between services under normal highway driving conditions. A custom heat shield is included to isolate the air filter from high engine bay temperatures, ensuring the intake draws in cooler outside air.

• Increased Airflow: Aerodynamically engineered HDPE tube increases airflow volume to the engine.
• Durable Construction: High-density polyethylene rotationally-molded tube for lasting performance.
• High-Flow Filtration: Includes a washable, reusable oiled cotton filter (conical design).
• Thermal Management: Custom heat shield protects intake air from engine heat soak.
• Simple Installation: Designed to install in 90 minutes or less using common hand tools.
• Manufacturer Part Number: 57-3041
• Warranty: Backed by the K&N Million Mile Limited Warranty.

Fits 2003-2009 Hummer H2 Base (V8-6.0L).

The K&N 57 Series Performance Air Intake Kit (MPN: 57-3037) is engineered to replace the restrictive factory air filter and intake housing. By utilizing a rotationally-molded high-density polyethylene (HDPE) tube, this system increases airflow volume and velocity to the engine, providing a guaranteed increase in horsepower and torque. The oversized, conical High-Flow Air Filter is constructed from oiled cotton media and is designed for up to 100,000 miles of use between cleanings under normal highway conditions.

This kit includes a custom heat shield to isolate the filter from high engine bay temperatures, ensuring a cooler air charge. Designed for a straightforward installation, the system typically bolts on in less than 90 minutes using factory mounting points.

• Rotationally-molded HDPE intake tube increases airflow volume
• Washable and reusable oiled cotton High-Flow Air Filter
• Custom heat shield isolates intake air from engine heat
• Direct bolt-on installation typically completed in under 90 minutes
• Backed by the K&N Million Mile Limited Warranty
• Manufacturer Part Number: 57-3037

Fits 1997-2000 Chevrolet Corvette (V8-5.7L).

Unlock engine potential by replacing the restrictive factory air box and intake path with the K&N 57 Series FIPK Performance Intake System. This kit features a high-density polyethylene (HDPE) rotationally-molded tube designed to streamline and increase the volume of airflow to the engine. The smooth internal surface of the HDPE tube reduces turbulence, providing a direct path for cooler, denser air to reach the intake manifold.

This system includes an oversized, conical High-Flow Air Filter featuring K&N's signature oiled cotton media, which provides excellent filtration and can go up to 100,000 miles between cleanings under normal highway conditions. A custom-engineered heat shield is included to isolate the air filter from high engine bay temperatures, ensuring the intake draws in cooler outside air for improved combustion efficiency.

• Rotationally-molded HDPE intake tube for increased airflow volume
• Washable and reusable oiled cotton High-Flow Air Filter
• Custom heat shield included to block engine bay heat
• Bolt-on installation typically completed in 90 minutes or less
• K&N Million Mile Limited Warranty
• Manufacturer Part Number: 57-3020

Fits 2000-2003 Dodge Dakota and Durango models equipped with 5.2L or 5.9L V8 engines.

The K&N 57-Series FIPK (Fuel Injection Performance Kit) replaces your vehicle's restrictive factory air filter and intake housing. This system utilizes a high-density polyethylene (HDPE) rotationally-molded intake tube to increase airflow volume and velocity to the engine. By providing a more direct path for air, this kit is designed to deliver a measurable increase in horsepower and torque.

The system features an oversized, conical High-Flow Air Filter with oiled cotton media, providing excellent filtration and a service interval of up to 100,000 miles under normal highway driving conditions. A custom-fit heat shield is included to isolate the air filter from engine heat, ensuring cooler, denser air enters the intake. This bolt-on upgrade typically installs in less than 90 minutes using standard tools and factory mounting points.

• MPN: 57-1517-2
• Tube Material: High-Density Polyethylene (HDPE)
• Filter Media: Washable Oiled Cotton
• Filter Style: Round Tapered / Conical
• Installation: Bolt-on, no drilling required
• Warranty: K&N Million Mile Limited Warranty

This HKS high-performance silicone hose coupler is engineered for universal application in custom intake, intercooler, and cooling system plumbing. Designed to withstand the extreme temperatures and high boost pressures found in turbocharged engines, this multi-layer reinforced silicone hose provides a secure, vibration-resistant connection between hard pipes.

• Inner Diameter: 100mm
• Total Length: 70mm
• Color: Signature HKS Purple
• Material: High-temperature multi-layer reinforced silicone
• Manufacturer Part Number: 1803-SA040

Fits Jeep Cherokee models.

The Fel-Pro 17340 Engine Intake Manifold Gasket Set is engineered specifically for the aftermarket repair environment. Recognizing that high-mileage engines often present warped or pitted sealing surfaces, Fel-Pro utilizes proprietary materials and exclusive sealing technologies to provide a reliable, leak-free seal where standard gaskets might fail.

• Designed for Repair: Engineered to compensate for imperfect sealing surfaces to ensure a superior seal in real-world conditions.
• Proprietary Materials: Manufactured with specialized materials that offer excellent resistance to heat and engine fluids.
• Complete Solution: This set includes the necessary components required for a comprehensive intake manifold gasket replacement.
• Engineering Expertise: Each set is designed, reviewed, and validated by Fel-Pro engineers through rigorous research and development.
• Real-World Tested: Validated through on-vehicle testing to ensure optimal fitment and performance on the road.
• Manufacturer Part Number: 17340

The Fel-Pro 1357 Engine Intake Manifold Gasket Set is engineered for the professional repair environment, providing a dependable seal on engines with imperfect sealing surfaces. Built with proprietary materials and exclusive sealing technologies, this set addresses the specific challenges of real-world maintenance where surfaces may no longer be perfectly flat. Each component is validated by Fel-Pro engineers to ensure long-term durability and a precise fit for intake manifold service.

• Proprietary Materials: Specifically formulated to conform to surface irregularities and prevent leaks.
• Repair-Specific Design: Engineered to seal surfaces that are pitted or uneven, common in high-mileage or performance applications.
• Comprehensive Solution: Includes the gaskets and seals necessary to complete the intake manifold repair unless otherwise noted.
• Engineering Excellence: Rigorously tested on-vehicle to meet strict performance and reliability standards.
• Installers Advantage: Designed to simplify installation and provide a superior seal to resolve common OE design vulnerabilities.
• Part Number: 1357

The Fel-Pro 1296 Engine Intake Manifold Gasket Set is engineered specifically for the automotive repair environment, providing a reliable, long-term seal even on imperfect or worn sealing surfaces. Using proprietary materials and exclusive sealing technologies, Fel-Pro gaskets solve common OE design issues and compensate for surface irregularities to prevent vacuum leaks and ensure optimal engine performance.

• Seal Technology: Features proprietary materials and unique design features specifically engineered to provide a superior seal for the real-world repair environment.
• Imperfect Surface Performance: Specially manufactured to help seal surfaces that are no longer perfectly flat or smooth.
• Comprehensive Set: Includes every gasket and seal necessary to complete the intake manifold repair unless otherwise noted.
• Engineered and Validated: Parts are designed, reviewed, and approved by Fel-Pro engineers through rigorous research and development to ensure professional-grade durability.
• Manufacturer Part Number: 1296

The Fel-Pro 12895 Intake Manifold Gasket Set is engineered for the rigors of the repair environment, delivering a dependable seal on engines with imperfect sealing surfaces. Constructed with proprietary materials, this set provides specialized sealing technologies required to resolve leaks and compensate for surface wear that standard gaskets may fail to address.

• Engineered for Repairs: Specifically designed to seal warped or pitted surfaces found in real-world service conditions.
• Complete Solution: This gasket set includes the necessary components for a comprehensive intake manifold gasket replacement.
• Installer's Advantage: Designed to save time and simplify the job by addressing OE design issues and enhancing overall durability.
• Engineering Expertise: Every part is reviewed and validated by Fel-Pro engineers through rigorous research to ensure a precise fit.
• Real-World Tested: Validated on-vehicle to ensure optimal performance and a leak-free seal under operating temperatures.
• Manufacturer Part Number: 12895

The Fel-Pro 1289 Intake Manifold Gasket Set is engineered specifically for the engine repair environment, providing a reliable seal even on imperfect or worn sealing surfaces. Using proprietary materials and unique design features, this set addresses common OE sealing issues to prevent vacuum leaks and ensure long-term durability during manifold service.

• Engineered for Repair: Specifically designed to compensate for surface irregularities found in real-world repair conditions.
• Advanced Sealing Technology: Utilizes proprietary materials and exclusive design features to maintain a superior seal under high thermal stress.
• Installer's Advantage: Designed to simplify installation and solve common customer complaints regarding manifold leaks or durability.
• Validated Quality: Every component is tested on-vehicle and validated by engineers to meet or exceed performance requirements.
• Manufacturer Part Number: 1289

The Fel-Pro 1288 Performance Intake Manifold Gasket Set is engineered for high-performance engine builders who require a precise seal on modified applications. These gaskets feature a coreless design, specifically manufactured without a metal core to allow for custom trimming and exact port matching on enlarged or reshaped cylinder heads and intake manifolds.

Constructed with proprietary materials, Fel-Pro Performance gaskets are designed to deliver a reliable seal even on imperfect surfaces. They have been extensively tested for compatibility with various aftermarket cylinder head and intake manifold combinations to ensure performance in the real-world repair and racing environment.

• Manufacturer Part Number: 1288
• Coreless Design: Allows for custom port trimming to match modified engine components
• Installer Advantage: Engineered to simplify installation and solve sealing issues on aftermarket hardware
• Material: Proprietary sealing material designed for imperfect surfaces
• Compatibility: Not intended for use in emission-controlled vehicles

The Fel-Pro 1286 Performance Intake Manifold Gasket Set is engineered for high-performance engine builders who require a precise seal on modified or aftermarket components. Designed without a metal core, these gaskets allow for custom trimming to achieve an exact match with modified intake ports, ensuring unobstructed airflow and a reliable seal on aluminum heads with non-conventional port and bolt locations.

Constructed from proprietary sealing materials, Fel-Pro performance gaskets are tested for compatibility across a wide range of aftermarket cylinder head and intake manifold combinations. This set is specifically designed for racing or off-road applications where exhaust crossover openings are not required.

• Part Number: 1286
• Construction: Fiber-based performance material without a metal core for easy trimming and port matching
• Application: Compatible with aluminum heads featuring non-conventional port and bolt patterns
• Technical Note: No exhaust crossover openings or blocking shields included
• Usage: Intended for non-emissions-controlled vehicles only
• Seal Profile: Designed to compensate for imperfect sealing surfaces in real-world repair and performance environments

The Fel-Pro 1284 Engine Intake Manifold Gasket Set is engineered specifically for the automotive repair environment, providing a reliable seal on imperfect or worn sealing surfaces. Designed with proprietary materials and unique features, this set addresses real-world challenges to ensure a superior seal during intake manifold maintenance or engine rebuilds.

• Proprietary Sealing Technology: Features exclusive materials and innovations designed to solve the sealing issues commonly encountered in the aftermarket.
• Engineered for Imperfect Surfaces: Specifically manufactured to provide a secure seal even on irregular or pitted mounting surfaces.
• Installers Advantage: Designed to simplify the installation process while addressing original equipment (OE) design flaws for enhanced durability.
• Rigorous Testing: Every component is designed, reviewed, and validated by Fel-Pro engineers through research and on-vehicle testing.
• Complete Repair Solution: This set includes the necessary gaskets and seals required for a standard intake manifold gasket replacement (MPN: 1284).

The Fel-Pro 1282 Performance Intake Manifold Gasket Set is engineered specifically for engine builders working with modified ports and aftermarket components. Unlike standard gaskets, this set features a coreless design that allows for precise hand-trimming to match custom port shapes and sizes for optimized flow.

Constructed with proprietary materials for the real-world repair environment, these gaskets provide a reliable seal even on imperfect surfaces. They are specifically suited for aluminum cylinder heads featuring non-conventional port and bolt locations. Note that this set is designed without exhaust crossover openings or blocking shields to accommodate specific performance intake configurations.

• Trimmable Coreless Design: Built without a metal core to allow engine builders to trim for an exact fit on modified ports.
• Broad Compatibility: Tested with various aftermarket cylinder head and intake manifold combinations.
• Specialized Fitment: Designed for aluminum heads with non-conventional port and bolt locations.
• Race Ready: No exhaust crossover openings or blocking shields included.
• Part Number: 1282

Notice: This gasket set is not intended for use in emissions-controlled vehicles.

The Fel-Pro 1278 Performance Intake Manifold Gasket Set is engineered for custom engine builds and high-performance applications involving modified aluminum cylinder heads. These gaskets are designed without a metal core, allowing engine builders to precisely trim the material for an exact match to modified or enlarged intake ports.

Built to handle the real-world challenges of aftermarket assemblies, this set provides a reliable seal on imperfect surfaces and is specifically tested for compatibility with various aftermarket cylinder head and intake manifold combinations. The design is optimized for aluminum heads featuring non-conventional port and bolt locations where standard OE gaskets cannot provide adequate coverage.

• Trimmable non-metal core construction for custom port matching
• Optimized for aluminum heads with non-conventional port and bolt locations
• Eliminates exhaust crossover openings and blocking shields for performance tuning
• Engineered for the repair environment to seal imperfect surfaces
• Manufacturer Part Number: 1278

Note: These gaskets are not intended for use in emission-controlled vehicles.

The Fel-Pro 1277 Performance Intake Manifold Gasket Set is engineered for high-performance engines where standard sealing solutions fall short. These gaskets are specifically designed for aluminum cylinder heads featuring non-conventional port and bolt locations, providing a reliable seal on imperfect surfaces common in the repair environment.

A standout feature for engine builders is the coreless construction. By omitting a metal core, Fel-Pro allows for precise custom trimming of the gasket material to create an exact match for modified or enlarged intake ports. This versatility ensures optimal airflow and sealing integrity across a wide range of aftermarket cylinder head and intake manifold combinations.

• Manufacturer Part Number: 1277
• Core Material: No metal core, allowing for custom port trimming and matching.
• Application Compatibility: Designed for aluminum heads with non-conventional port and bolt patterns.
• Design Features: No exhaust crossover openings or blocking shields.
• Usage Note: Not intended for use in emission-controlled vehicles.
• Engineering: Validated for use with diverse aftermarket intake and head configurations.

The Fel-Pro 1276 Engine Intake Manifold Gasket Set is engineered specifically for the repair environment, providing a reliable seal even on warped or imperfect mating surfaces. This professional-grade set utilizes proprietary materials and unique design features to resolve common OE sealing issues and ensure long-term durability.

Developed and validated by Fel-Pro engineers, this kit is real-world tested to withstand the thermal cycling and pressure demands of high-performance engines. By focusing on the unique challenges of the aftermarket repair, Fel-Pro provides installers with the components necessary to prevent vacuum leaks and coolant migration.

• Sealing Technology: Features exclusive innovations and proprietary materials designed for a superior seal.
• Imperfect Surface Coverage: Engineered to help seal surfaces that are no longer perfectly flat due to age or wear.
• Complete Repair Solution: This set includes all necessary components required for the intake manifold service under part number 1276.
• Engineered and Tested: Rigorously researched, developed, and on-vehicle validated by Fel-Pro specialists for optimal performance.

The Fel-Pro 1275 Engine Intake Manifold Gasket Set is engineered specifically for the automotive repair environment. Unlike standard gaskets, Fel-Pro sets are designed to provide a reliable, leak-free seal even on imperfect or worn sealing surfaces, addressing common real-world engine issues and OE design flaws.

• Proprietary Sealing Technologies: Features exclusive innovations and materials designed to ensure a superior seal for demanding repairs.
• Designed for Imperfect Surfaces: Specifically manufactured to compensate for surface irregularities often found in high-mileage engines.
• Installers Advantage: Engineered to simplify the installation process and enhance overall durability and longevity.
• Engineering Expertise: Every component is designed, reviewed, and validated by Fel-Pro engineers through rigorous research and development.
• Complete Repair Solution: Includes the necessary gaskets and components needed for a professional intake manifold repair (Part Number: 1275).

The Fel-Pro 1274 intake manifold gasket set is engineered specifically for the real-world repair environment, where sealing surfaces are often less than perfect. These gaskets utilize proprietary materials and unique design features to compensate for surface irregularities, ensuring a reliable, leak-free seal that matches or exceeds original equipment performance.

Built by Fel-Pro engineers through rigorous research and development, this set is validated through on-vehicle testing to ensure optimal performance on the road. Whether you are dealing with casting variations or minor warping, the 1274 set provides the conformability and durability needed for a lasting repair.

• Engineered for Repairs: Designed specifically for imperfect sealing surfaces found in high-mileage or serviced engines.
• Proprietary Materials: Uses specialized sealing technologies to solve common OE design issues and prevent vacuum or coolant leaks.
• Comprehensive Set: Includes necessary components required for a complete intake manifold gasket replacement.
• Precision Fit: Application-specific design ensures correct port alignment and hardware clearance.
• Manufacturer Part Number: 1274

The Fel-Pro 1265 Intake Manifold Gasket Set is engineered for the real-world repair environment, specifically designed to provide a reliable seal on imperfect or worn sealing surfaces. Utilizing proprietary materials and unique design features, this set addresses common original equipment design issues to ensure a leak-free installation and long-term durability.

Each component is designed, reviewed, and validated by Fel-Pro engineers through rigorous research and development. To ensure optimal performance on the road, these gaskets are real-world tested on-vehicle, providing a time-saving solution that includes every necessary part for the manifold repair.

• Sealing Technology: Features proprietary materials and exclusive design innovations for a superior seal.
• Repair Focused: Engineered specifically for the irregular surfaces common in aftermarket engine service.
• Installer Advantage: Designed to simplify the job, solve customer complaints, and enhance longevity.
• Engineering Expertise: Rigorously tested, reviewed, and approved by Fel-Pro engineers.
• Complete Repair Set: Includes all required gaskets for a standard intake manifold replacement.
• MPN: 1265

The Fel-Pro Performance 1263 Engine Intake Manifold Gasket Set is engineered for engine builders and high-performance applications where custom port matching is required. These gaskets are manufactured without a metal core, allowing for precise hand-trimming to accommodate modified or enlarged intake ports. Specifically developed for use with aluminum cylinder heads featuring non-conventional port and bolt locations, these gaskets provide a reliable seal even on imperfect sealing surfaces.

• Trimmable design without a metal core for exact fitment on modified ports
• Compatible with a wide range of aftermarket cylinder head and intake manifold combinations
• Designed for aluminum heads with non-conventional port and bolt patterns
• Constructed without exhaust crossover openings or blocking shields
• Manufacturer Part Number: 1263

Note: This product is designed for performance applications and is not intended for use in emission-controlled vehicles.

The Fel-Pro 1262 Performance Intake Manifold Gasket Set is engineered specifically for the real-world repair environment, providing a reliable seal on imperfect or warped sealing surfaces. These gaskets utilize proprietary materials and unique design features to address common OE sealing issues, ensuring long-lasting durability and leak-free performance.

• Surface Compensation: Specifically designed to seal imperfect or non-optimal sealing surfaces common in high-performance and repair applications.
• Proprietary Materials: Manufactured with exclusive Fel-Pro sealing technologies and innovative materials for superior fluid and vacuum retention.
• Installer's Advantage: Engineered to save time and simplify the installation process while enhancing overall system longevity.
• Validated Performance: Rigorously tested on-vehicle and approved by Fel-Pro engineers to meet strict performance standards.
• Complete Kit: Includes the gaskets required for a professional-grade intake manifold repair (Manufacturer Part Number: 1262).

The Fel-Pro 1259 Performance Intake Manifold Gasket Set is engineered for engine builders and technicians working with modified or non-standard ports. These gaskets are constructed without a metal core, allowing for precise trimming to match port-matched cylinder heads and intakes. To ensure a reliable seal on imperfect or aftermarket surfaces, Fel-Pro integrates Printoseal elastomeric sealing beads that provide extra sealing strength directly around the intake ports.

• Manufacturer Part Number: 1259
• Custom Fit: Coreless construction allows for custom trimming to match modified ports
• Sealing Technology: Printoseal elastomeric beads for enhanced sealing pressure around the intake port
• Compatibility: Extensively tested with aftermarket cylinder head and intake manifold combinations
• Port Design: Specifically suited for aluminum heads with non-conventional port and bolt locations
• Configuration: No exhaust crossover openings or blocking shields
• Compliance: Not intended for use in emission-controlled vehicles

The Fel-Pro 1256 Intake Manifold Gasket Set is engineered specifically for the real-world repair environment, providing a reliable seal on imperfect or warped sealing surfaces. This set features proprietary materials and exclusive sealing technologies designed to address common OE design issues and deliver long-lasting durability.

Developed and validated by Fel-Pro engineers, this gasket set undergoes rigorous research and on-vehicle testing to ensure optimal performance. It provides technicians and DIYers with a complete solution for intake manifold service, including all necessary components for a professional installation.

• Manufacturer Part Number: 1256
• Specialized Engineering: Manufactured for the repair environment to seal surfaces with minor imperfections.
• Proprietary Materials: Utilizes unique sealing technologies for superior fluid and vacuum retention.
• Complete Repair Solution: Includes the gaskets required for a full intake manifold gasket replacement.
• Real-World Validated: On-vehicle tested to ensure performance, fitment, and a leak-free seal.

The Fel-Pro 1254 intake manifold gasket set is engineered specifically for the automotive repair environment, providing a reliable seal on engines with imperfect or non-standard sealing surfaces. Manufactured with proprietary materials and unique design features, these gaskets compensate for surface irregularities to prevent vacuum leaks and fluid seepage in real-world conditions.

This comprehensive set is designed and validated by Fel-Pro engineers to ensure optimal performance and durability. Whether you are addressing known OE design issues or performing a standard manifold service, these gaskets provide the necessary sealing integrity to maintain engine efficiency and longevity. The kit includes the primary components required for a complete intake manifold gasket replacement.

• Engineered for Repair: Specifically designed to compensate for imperfect sealing surfaces found in high-mileage engines.
• Proprietary Materials: Features exclusive technologies and specialized materials to ensure a superior, long-lasting seal.
• Complete Kit: Includes the gaskets necessary for the repair to save time and ensure all mating surfaces are properly sealed.
• Expert Validation: Rigorously tested and approved by Fel-Pro engineers for performance and fitment.
• Part Number: 1254

The Fel-Pro 1251 Engine Intake Manifold Gasket Set is engineered for the real-world repair environment, providing a reliable seal even on warped or imperfect mating surfaces. Utilizing proprietary materials and exclusive sealing technologies, these gaskets address common OE design flaws to ensure long-term durability and leak-free performance. This set is specifically designed for installers who require professional-grade solutions for challenging sealing applications.

• Designed for Imperfect Surfaces: Engineered to compensate for minor surface irregularities and pitting found in high-mileage or performance engines.
• Proprietary Materials: Constructed with specialized sealing compounds that offer superior resistance to chemicals and thermal expansion.
• Installers Advantage: Developed to simplify installation and solve recurring customer complaints regarding intake leaks.
• Validated Engineering: Rigorously tested on-vehicle and approved by Fel-Pro engineers for precise fitment and optimal sealing pressure.

• Manufacturer Part Number: 1251
• Product Type: Intake Manifold Gasket Set
• Application Focus: Performance and Repair Environments

The Fel-Pro 1249 Performance Intake Manifold Gasket Set is engineered specifically for engine builders working with aluminum heads that feature non-conventional port and bolt locations. These gaskets are constructed without a metal core, providing the flexibility needed to trim the gasket for a precise match on modified ports.

This set has been extensively tested for compatibility across a variety of aftermarket cylinder head and intake manifold combinations. Designed for the high-performance repair environment, they provide a reliable seal even on imperfect surfaces. Note that these gaskets do not include exhaust crossover openings or blocking shields and are not intended for use on emission-controlled vehicles.

• Manufacturer Part Number: 1249
• Construction: No metal core for custom trimmability
• Compatibility: Aluminum heads with non-conventional port and bolt patterns
• Exhaust Crossover: No crossover openings or shields
• Application: Performance and racing; not for emission-controlled vehicles

The Fel-Pro 1247 Performance Intake Manifold Gasket Set is engineered for high-performance engines and modified port configurations. These gaskets are constructed without a metal core, allowing engine builders to custom-trim the material for an exact fit to oversized or modified intake ports. This makes the 1247 set a versatile solution for sealing various aftermarket cylinder head and manifold combinations in the real-world repair environment.

• Printoseal Technology: Utilizes elastomeric sealing beads to provide increased sealing pressure and extra strength around the intake ports.
• Customizable Porting: Designed without a metal core to simplify trimming for precise port matching on high-performance builds.
• Installer Advantage: Specifically built to handle imperfect sealing surfaces and solve common leakage issues encountered during performance engine assembly.

• Part Number: 1247
• Intake Style: Medium Riser
• Construction: Trimmable (No metal core)
• Special Feature: Printoseal elastomeric beads
• Note: Not intended for use in emission-controlled vehicles.

The Fel-Pro 1246 Performance Intake Manifold Gasket Set is engineered for engine builders and enthusiasts working with modified ports and aftermarket cylinder head/intake combinations. These gaskets are constructed without a metal core, allowing for precise hand-trimming to match exact port dimensions for optimized airflow and a perfect fit on custom applications.

Equipped with proprietary Printoseal elastomeric sealing beads, this set provides localized sealing pressure around the intake ports. This design compensates for imperfect sealing surfaces and provides the extra strength needed for the real-world repair environment. Designed for standard and low riser configurations, they ensure a reliable seal where standard gaskets may fail.

• Manufacturer Part Number: 1246
• Design: No metal core for trimmable, exact port matching
• Sealing Technology: Printoseal elastomeric beads for enhanced port sealing
• Compatibility: Performance-tested with virtually all aftermarket head/intake combinations
• Application: Standard and Low riser
• Regulatory: Not intended for use in emission-controlled vehicles