Fits 2006-2013 Chevrolet Corvette Z06 (V8-7.0L).

Optimize your C6 Corvette's airflow with the aFe Power Magnum FORCE Stage-2 Pro 5R Cold Air Intake System. This system replaces the restrictive factory airbox with a precision-designed, rotomolded plastic intake tube that maximizes air volume and velocity into the LS7 engine for improved throttle response and performance gains.

The included 16-gauge powder-coated heat shield is a one-piece design that installs without cutting or drilling. To maintain low intake temperatures, the system features a specialized cover that blocks engine heat while directing cooler ambient air toward the filter. The heart of the system is the 360-degree Pro 5R air filter, featuring five layers of washable, reusable oiled media for maximum flow and protection.

• Pro 5R Filter: 5-layer progressive oiled cotton gauze media for maximum airflow and filtration efficiency.
• Rotomolded Intake Tube: Smooth-walled plastic construction reduces turbulence and resists heat soak.
• One-Piece Heat Shield: Durable 16-gauge powder-coated steel mounts to factory locations.
• Hassle-Free Install: Bolts directly to the vehicle with no permanent modifications required.
• Manufacturer Part Number: 54-12732
• Warranty: 2-Year Limited Warranty

Fits select 2020-2023 Jeep Wrangler and Gladiator models (V6-3.0L).

Maximize the performance of your EcoDiesel with the aFe POWER Rapid Induction Cold Air Intake System. This system is designed to outflow the factory intake by 19%, delivering a measured flow of 380 CFM at 7" H2O. By replacing the restrictive factory upper intake box with a custom-designed, dyno-tuned XLPE intake tube and a high-flow filter, this kit reduces turbulence and heat soak for consistent power gains.

The system features an 18-gauge steel heat shield finished in wrinkle-black powder coating. It mounts directly to the lower half of your factory airbox, ensuring a simple, bolt-on installation using factory mounting locations. The included Pro 5R air filter uses five layers of progressively finer pre-oiled cotton gauze media to provide maximum airflow and filtration efficiency, and is fully washable and reusable for the life of the vehicle.

• Increased Airflow: Outflows factory intake by 19% with 380 CFM @ 7" H2O.
• Pro 5R Filter: 5-layer pre-oiled cotton gauze media for maximum street and track performance.
• Durable Construction: Heat-resistant XLPE (cross-linked polyethylene) intake tube and 18-gauge steel heat shield.
• Complete Kit: Includes premium silicone coupler and stainless steel worm-gear clamps.
• Easy Installation: Replaces factory upper airbox; no drilling or cutting required.
• Manufacturer Part Number: 52-10005R

Fits 2007-2009 Toyota FJ Cruiser models (V6-4.0L).

The Volant Air Intake Snorkel is an essential upgrade for off-roaders looking to protect their engine during deep water crossings or in heavily dusty environments. By relocating the air intake point to the roofline on the passenger side, this snorkel ensures your engine draws cleaner, cooler air from an elevated position. This system is specifically designed to bolt onto Volant airboxes, creating a reliable, airtight seal that prevents contaminants from reaching your intake.

The snorkel scoop features a carefully engineered mesh cover that filters out large debris, such as leaves and branches, before they can enter the air path. The design also utilizes a hood seal adapter to funnel air efficiently from the snorkel into the airbox. Please note that while the snorkel is a bolt-on component, some cutting of the vehicle body is required for proper installation.

• Elevated intake position improves filtration efficiency in extreme off-road conditions
• Direct-mount design creates an airtight seal with Volant airboxes
• Integrated mesh scoop cover prevents debris from clogging the air path
• Durable construction built to withstand trail impacts and environmental exposure
• Requires some body cutting for installation
• Manufacturer Part Number: 38740

Vehicle Fitment

This Vibrant Performance 45-degree transition elbow is engineered for high-pressure intake and charge piping applications where space is limited. Constructed with high-temperature resistant aramid reinforcement fabric layered between premium silicone, this hose maintains structural integrity under boost while facilitating a precise size transition from 3.25 inches to 3.00 inches.

Designed for professional-grade plumbing, it handles an operating temperature range of -75°F to 392°F (-60°C to 200°C), making it ideal for turbocharger and intercooler connections. The multi-layer reinforcement ensures the hose resists ballooning and heat soak. Please note that silicone hoses are intended for air and coolant only; they are not compatible with oil or fuel transfer.

• Manufacturer Part Number: 19768
• Inlet/Outlet ID: 3.25in to 3.00in
• Angle: 45 Degree Transition
• Material: Aramid Reinforced Silicone
• Finish: Black
• Operating Temperature: -75°F to 392°F (-60°C to 200°C)

Fits 2025 Jeep Wrangler models equipped with the L4-2.0L engine, including 4xe Hybrid and standard internal combustion trims.

The K&N 63 Series AirCharger intake system replaces your Jeep's restrictive factory air filter and intake housing with a high-performance induction setup. This system features a rotationally molded high-density polyethylene (HDPE) intake tube designed to increase the volume of airflow to your engine. By streamlining the air path, this intake is guaranteed to provide an increase of 19.24 horsepower and 25.47 lb-ft of torque without requiring an ECU tune.

This kit includes an oversized, conical High-Flow Air Filter featuring oiled cotton media. The washable, reusable filter is engineered to go up to 100,000 miles between services under normal highway driving conditions. A custom-designed enclosed air box is also included to isolate the filter from high engine bay temperatures, ensuring a cooler, denser oxygen charge for better combustion. The entire system is designed for a straightforward installation that can typically be completed in under 60 minutes using basic hand tools.

• Manufacturer Part Number: 63-1597
• Horsepower Gain: 19.24 HP @ 5013 RPM
• Torque Gain: 25.47 lb-ft @ 3474 RPM
• Intake Tube Material: Black High-Density Polyethylene
• Filter Media: Oiled Cotton Gauze (Red)
• Service Interval: Up to 100,000 miles
• Warranty: No-Hassle Lifetime Limited Warranty

Fits 2020-2025 Chevrolet Silverado and GMC Sierra 2500 HD/3500 HD models equipped with the 6.6L L5P Duramax diesel engine.

The WCFab High Flow Intake Bundle Kit is a comprehensive Stage 1 cooling system upgrade designed to eliminate the restrictive and failure-prone factory plumbing between the turbo and the engine. By replacing the undersized OE plastic and rubber components with high-flow aluminum piping, this kit improves throttle response, turbo spool-up, and overall engine efficiency. The 3-inch hot-side pipe replaces the restrictive 2.5-inch factory unit and deletes the resonator for smoother airflow, while the 3.5-inch cold-side pipe replaces the weak plastic OE pipe known for boost leaks and failures under load.

Each component is manufactured in the USA from heavy-duty 14-gauge aluminum tubing featuring mandrel bends for maximum flow. The cold-side pipe utilizes a CNC-machined flange with a double o-ring seal, replacing the factory clip-ring design at the Y-bridge for a superior, leak-free connection capable of holding significantly higher boost pressures. This bolt-on kit requires no tuning and is compatible with stock trucks.

• 3-inch diameter Driver Side (Hot Side) Intercooler Pipe
• 3.5-inch diameter Passenger Side (Cold Side) Intercooler Pipe
• Heavy-duty 14-gauge aluminum construction with mandrel bends
• CNC-machined flange with double o-ring seals
• Reinforced silicone boots and stainless steel T-bolt clamps
• Custom Gloss White powder coat finish
• Retains all factory connection points and sensors
• Manufacturer Part Number: WCF100410-GW

Includes: Hot-side and cold-side intercooler pipes, silicone boots, stainless steel T-bolt clamps, o-rings, and intercooler outlet clip.

Fits select 2020-2025 Chevrolet Silverado and GMC Sierra 2500 HD/3500 HD models equipped with the 6.6L L5P Duramax diesel engine.

The WCFab High Flow Intake Bundle is a Stage 1 performance upgrade designed to eliminate restrictive factory components and common failure points in the L5P Duramax charging system. This kit replaces the narrow, multi-piece OEM intercooler plumbing with heavy-duty, one-piece mandrel-bent aluminum piping. By increasing the hot side to 3 inches and the cold side to 3.5 inches, this bundle reduces turbulence and improves airflow between the turbo and the engine for better throttle response and more efficient turbo spooling.

Engineered for durability under high-boost conditions, the driver-side (hot) pipe removes the failure-prone OEM resonator and middle boot joint. The passenger-side (cold) pipe features a CNC-machined flange with a double O-ring seal, replacing the factory plastic and rubber assembly that often leaks or fails under load. Finished in a signature Candy Teal powder coat, this bolt-on kit requires no ECU tuning and retains all factory sensor connection points.

• 3 in. Driver Side (Hot) Intercooler Pipe (14-gauge aluminum)
• 3.5 in. Passenger Side (Cold) Intercooler Pipe (14-gauge aluminum)
• CNC-machined flange with double O-ring seal for leak-free performance
• Heavy-duty reinforced silicone boots and stainless steel T-bolt clamps
• Mandrel-bent construction for optimized airflow
• Retains factory sensors and connection points
• No tuning required; compatible with stock vehicles
• Made in the USA
• Manufacturer Part Number: WCF100410-CT

The Vibrant Performance 4-ply Aramid reinforced silicone straight hose coupler is engineered for high-heat and high-pressure automotive environments. Designed for use in turbocharger plumbing, intercooler end tanks, and charge pipe assemblies, this 12-inch hose section provides a durable connection that resists swelling and bursting under heavy load. The hand-wrapped construction ensures consistent wall thickness and reliability for critical plumbing paths.

Built with four layers of high-strength Aramid reinforcement fabric, these couplers maintain structural integrity across an expansive temperature range from -75°F to 392°F. This hose is UV and ozone resistant to prevent degradation over time. Please note this component is suitable for air, water, and coolant service only; it is not compatible with fuel or oil.

• Manufacturer Part Number: 27051
• Inside Diameter: 1.75 in.
• Length: 12 in.
• Construction: 4-ply Aramid reinforced silicone
• Temperature Rating: -75°F to 392°F (-60°C to 200°C)
• Compliance: Meets or exceeds SAE J20 specifications
• Finish: Black
• Application: Coolant, water, and air service

The Vibrant Performance Aramid Reinforced Silicone Transition Hose Coupler is engineered for high-demand plumbing applications that require a reliable transition between different pipe diameters. Each coupler features high-temperature resistant aramid reinforcement fabric layered between premium silicone, providing significantly more heat resistance and structural integrity than standard polyester-reinforced hoses.

• Durable Construction: Multi-layer aramid reinforcement allows for a consistent operating temperature range of -75°F to 392°F (-60°C to 200°C).
• Application Specific: Designed exclusively for air, water, and coolant service; not for use in fuel or oil transfer.
• Precise Fitment: Maintains a secure seal on forced induction piping, intake systems, and cooling junctions.

Technical Specifications:

• Inlet Diameter: 3.50 in (88.9 mm)
• Outlet Diameter: 3.00 in (76.2 mm)
• Total Length: 4.50 in (114.3 mm)
• Color: Black
• Material: Aramid Reinforced Silicone
• Manufacturer Part Number: 19736

Fits select 2002-2017 Subaru WRX, WRX STI, and Forester models.

The Torque Solution Throttle Body Hose Coupler is a performance-oriented replacement for the standard factory rubber coupler. In turbocharged EJ-series engines, the OEM hose is a common failure point that can crack or blow off under increased boost pressure, leading to power-robbing vacuum leaks. This reinforced silicone coupler is engineered to withstand extreme temperatures and high-pressure environments, ensuring a consistent, airtight seal between the intercooler and the throttle body.

• Multi-layer reinforced silicone construction for maximum durability
• Designed to resist oil and fuel degradation
• Direct fit replacement for the factory throttle body hose
• Ensures stable intake pressure under high-boost conditions
• Manufacturer Part Number: TS-SU-305

Vehicle Fitment:

• 2002-2007 Subaru Impreza WRX
• 2004-2014 Subaru Impreza WRX STI
• 2015-2017 Subaru WRX STI
• 2004-2008 Subaru Forester XT / Sports 2.5 XT

Fits 2019-2023 Ram 1500 models equipped with the 5.7L engine. This CORSA Performance Cold Air Intake (MPN 46557-1) is engineered to maximize airflow and optimize engine performance. By replacing the restrictive factory induction system, this intake improves flow while providing superior engine protection. It features a MaxFlow 5 oiled filter, constructed with five layers of high-quality cotton gauze pleated between durable aluminum screens to ensure maximum air volume and long service intervals.

• MaxFlow 5 oiled filter provides high flow rates and up to 40,000 miles between cleanings.
• Rugged airbox design protects the filter from heat and environmental debris.
• Integrated smoked acrylic see-through lid allows for quick filter inspections.
• Direct bolt-on installation requires no permanent modifications and installs in under an hour.
• Proudly manufactured in the USA.
• Backed by a manufacturer's Lifetime Warranty.

Each kit includes the high-flow airbox, MaxFlow 5 oiled filter, smoked acrylic lid, and all necessary hardware for a complete installation.

Fits select 2019-2023 Cadillac Escalade, Chevrolet Silverado/Suburban/Tahoe, and GMC Sierra/Yukon (6.2L).

Optimize your engine's potential with the CORSA Performance Cold Air Intake System. Engineered to reduce restrictive airflow, this system replaces the factory intake with a high-flow airbox and ducting designed to increase performance while maintaining superior engine protection. This system features a smoked acrylic see-through airbox lid, allowing for easy filter inspection without disassembly.

At the heart of this intake is the DryTech 3D filter, CORSA's high-flow, non-oiled filtration technology. This 3D synthetic fiber media achieves nearly 98% filtration efficiency and is designed for long-range durability, offering up to 50,000-mile maintenance intervals depending on driving conditions. Maintenance is straightforward: simply vacuum the surface or rinse with soap and water.

• Manufacturer Part Number: 45954D
• Filtration: DryTech 3D high-flow, no-oil synthetic media
• Efficiency: Approximately 98% filtration efficiency
• Construction: Rugged, heat-shielded airbox with smoked acrylic lid
• Installation: Direct bolt-on design; installs in under 1 hour with basic tools
• Maintenance: Up to 50,000-mile service intervals (washable/reusable)
• Warranty: Lifetime Warranty
• Origin: Made in the USA

Fits select 2019-2023 Chevrolet Silverado 1500, Suburban, Tahoe, and GMC Sierra 1500, Yukon, and Yukon XL (5.3L).

The Corsa Performance 45953D Cold Air Intake system is engineered to maximize airflow and engine protection for late-model GM trucks and SUVs. By replacing the restrictive factory intake with a high-capacity, free-flowing design, this system reduces induction resistance and improves overall performance. The rugged airbox assembly is designed to shield the filter from engine heat and features a smoked acrylic see-through lid for quick visual filter inspections.

This intake comes equipped with Corsa’s DryTech 3D filtration technology. The high-flow, non-oiled synthetic filter achieves nearly 98% efficiency and is designed for low-maintenance intervals of up to 50,000 miles. For servicing, the filter can be easily cleaned with a vacuum or rinsed with soap and water, eliminating the need for specialized filter oils.

• DryTech 3D high-flow, non-oiled synthetic air filter
• Smoked acrylic see-through airbox lid for easy inspection
• Outflows factory intake systems for increased efficiency
• Simple bolt-on installation; installs in under 1 hour with standard tools
• Rugged airbox construction protects the filter from engine bay heat and debris
• Lifetime Warranty
• Made in the USA
• Manufacturer Part Number: 45953D

Fits 2014-2019 Chevrolet Corvette Stingray and Grand Sport models (6.2L). This system is not compatible with Z06 or ZR1 models.

The CORSA Performance C7 air intake is engineered from 100% pure carbon fiber to combine lightweight aesthetics with maximum thermal resistance and structural strength. By optimizing the intake path and reducing restriction, this system coaxes an additional 15 HP and 15 lb-ft of torque from the LT1 engine. The system is dyno-tuned to deliver these results on the factory calibration, meaning no aftermarket tuning is required for operation.

This direct bolt-on kit includes a precision-machined black anodized aluminum MAF mounting bracket for secure sensor fitment. The included DryTech filter offers high-capacity filtration in a non-oiled design, making it an ideal choice for owners seeking high-flow performance with simplified maintenance. The intake is backed by a limited lifetime warranty, with a one-year warranty on the filter element.

• 100% carbon fiber construction for superior strength and heat management
• Proven gains of up to 15 HP and 15 lb-ft TQ over the stock intake
• Includes high-flow DryTech non-oiled air filter
• Machined black anodized aluminum MAF mounting bracket
• Direct bolt-on installation takes only minutes with basic tools
• No ECU tuning required for performance gains
• Manufacturer Part Number: 44001D

Fits 2024-2026 Toyota Land Cruiser (J250) models including 1958, Base, and First Edition.

The aFe POWER Momentum GT Pro DRY S intake system is engineered to maximize airflow while maintaining superior filtration for the 2024-2026 Toyota Land Cruiser. This Orange Edition system features a sealed one-piece housing made from heat-resistant cross-linked polyethylene (XLPE) to eliminate heat soak. A large, clear sight window allows for quick filter inspections without needing to disassemble the housing, and the intake connects directly to the factory fender air inlet to ensure a steady supply of cool ambient air.

At the core of this system is an 8-inch tall, 360-degree radial flow air filter with a 4-inch flange. Utilizing three layers of oil-free synthetic media, the Pro DRY S filter provides maximum convenience and high filtration efficiency, making it ideal for street use. The patent-pending filter-to-housing interface reduces the number of components for a simplified installation that utilizes factory mounting points for a perfect fit.

• Filter Media: Pro DRY S oil-free 3-layer synthetic media for maximum convenience
• Housing: Heat-resistant XLPE one-piece sealed housing with clear sight window
• Intake Tube: Computer-designed, dyno-tuned XLPE tube resists heat soak
• Filter Dimensions: 8-inch tall radial flow filter with 4-inch flange and inverted top
• Hardware: Includes premium stainless-steel clamps and a high-temp silicone coupler
• MPN: 50-70127DN

Fits 2019-2024 Ram 1500 (V8-5.7L), including models equipped with the e-Torque engine option.

The aFe POWER Momentum GT intake system is designed to maximize airflow and cooler intake charges for your 5.7L Hemi. At the heart of the system is a 9-inch tall Pro DRY S performance air filter, featuring three layers of oil-free synthetic media for maximum convenience and filtration efficiency. This 360-degree radial flow filter is best suited for street and light off-road use, providing high dust-holding capacity without the need for filter oils.

The system features a one-piece, computer-designed housing made from heat-resistant cross-linked polyethylene (XLPE). This sealed housing protects against engine bay heat soak while a large, clear sight window allows for easy filter inspection without disassembling the unit. For additional cooling, an auxiliary air inlet can be used to pull air from the inner fender. The dyno-tuned XLPE intake tube is engineered for a precise fit and smooth airflow to the throttle body. Installation is straightforward, utilizing factory mounting points and premium hardware including stainless-steel T-bolt clamps and a durable injection-molded coupling.

• Manufacturer Part Number: 50-70013D
• 9-inch tall Pro DRY S oil-free synthetic 3-layer air filter
• Heat-resistant cross-linked polyethylene (XLPE) housing and intake tube
• Clear sight window for tool-free filter inspection
• Premium stainless-steel T-bolt clamps and injection-molded coupling included
• Utilizes factory mounting points for a secure, bolt-on installation

Fits 2003-2007 Dodge Ram 2500 and 3500 models equipped with the 5.9L Cummins diesel engine and factory or OEM-style turbochargers.

This Wehrli Custom Fab (WCFab) 4-inch intake kit replaces the restrictive plastic factory intake plumbing with a high-flow fabricated aluminum assembly. Designed to improve air velocity and volume, this kit enhances turbocharger spool-up, throttle response, and overall engine efficiency. The large-diameter mandrel-bent piping provides a more aggressive engine and turbo sound under load while maintaining a professional appearance under the hood with a Gloss Black powder-coated finish.

• 4" diameter fabricated aluminum intake piping for maximum air volume
• High-flow 4" dry air filter requires no oiling and is easy to maintain
• Includes Outerwear's hydrophobic pre-filter cover to repel moisture and debris
• Heavy-duty silicone boot and stainless steel T-bolt clamps for a leak-free seal
• Replaces restrictive OEM plastic intake components
• Made in the USA
• Manufacturer Part Number: WCF100346-GB

Fits select 2003-2007 Ford Excursion, F-250 Super Duty, and F-350 Super Duty models (6.0L Diesel).

The Volant Primo Closed Box Air Intake System (MPN 19860) is engineered to replace the restrictive factory airbox with a high-flow, thermally insulated induction system. Designed specifically for the 6.0L Powerstroke diesel, this system utilizes a fully enclosed airbox to isolate the filter from heat soak and environmental debris, while the insulated metallic lid ensures the intake charge remains cool and dense for improved combustion efficiency.

At the heart of this system is the Volant Primo Diesel air filter. This heavy-duty filter features 8 layers of high-quality textiles pleated between aluminum screens for maximum structural integrity under high-boost conditions. Engineered for severe-duty trucks, the Primo filter provides superior airflow while maintaining long service intervals of up to 40,000 miles depending on driving conditions.

• Direct bolt-on installation typically completed in under one hour.
• Closed-box design protects the filter from engine bay heat and moisture.
• Primo Diesel 8-layer textile filter media for high-capacity filtration.
• Insulated metallic lid for maximum thermal protection.
• Washable and reusable filter for extended service life.
• Manufacturer Part Number: 19860

Fits 2011-2014 Ford F-150 models including SVT Raptor, Lariat, Platinum, and Harley-Davidson Edition (V8-6.2L).

The Volant Performance PowerCore Closed Box Air Intake System is engineered to replace restrictive factory intake tracts with a high-flow, heat-shielded solution. This system features a fully enclosed airbox that isolates the filter from engine bay heat, drawing in cooler, denser ambient air to improve combustion and throttle response. The kit includes a smoked acrylic see-through lid for easy filter inspection and premium stainless steel clamps for a secure, leak-free seal.

At the heart of this system is the Donaldson PowerCore® Ultra-Web® dry air filter. Utilizing sub-micron fibers, this media is 99.96% efficient at capturing contaminants while remaining maintenance-free for up to 150,000 miles in standard driving conditions. This makes it an ideal choice for severe-duty work trucks and vehicles operating in dry, dusty, or arid environments.

• Donaldson PowerCore® Ultra-Web® filtration technology (99.96% efficient)
• Maintenance-free dry filter designed for up to 150,000 miles or 4 years
• Rugged closed-box design protects filter from moisture and engine heat
• Smoked acrylic lid for quick visual inspection
• Precision-fit bolt-on installation typically completed in under 1 hour
• High-quality stainless steel clamps included
• CARB Approved (check manufacturer documentation for specific E.O. status)
• Manufacturer Part Number: 193626

Fits select 1999-2004 Ford F-250 Super Duty, F-350 Super Duty, and 2000-2004 Ford Excursion (V10-6.8L).

Upgrade your V10 engine's breathing with the Volant Performance Pro5 Closed Box Air Intake System. This system replaces the restrictive factory airbox with a rugged, cross-linked polyethylene housing designed to insulate the intake air from ambient engine heat. By drawing in cooler, denser air, this system improves combustion efficiency and throttle response for both on-road and off-road driving.

This kit features Volant’s Pro5 air filter, a 5-layer oiled cotton gauze media reinforced with aluminum screen for maximum durability and high-volume airflow. The intake is finished with a smoked acrylic lid, allowing for easy filter inspection without needing to disassemble the airbox. Designed for a straightforward bolt-on installation, this system typically installs in under an hour using standard hand tools.

• Manufacturer Part Number: 19068
• Filter Type: Pro5 (5-layer oiled cotton gauze)
• Efficiency: 98% filtration efficiency
• Service Interval: Maintenance recommended up to every 40,000 miles (depending on conditions)
• Construction: High-density polyethylene closed airbox with smoked acrylic lid
• Installation: Direct bolt-on design; replaces factory intake system
• Compliance: CARB Approved
• Washable/Reusable: Yes

Fits 2000-2004 Toyota Tundra and Sequoia (V8-4.7L). This Volant Pro5 Air Intake System replaces the restrictive factory airbox with a high-performance, closed-box design engineered to shield the intake charge from heat soak while maximizing airflow.

The system features Volant's Pro5 oiled cotton gauze filter, constructed with five layers of high-quality textile pleated between aluminum screens. This filter is 98% efficient and designed for high flow rates and long-term durability, offering maintenance intervals up to 40,000 miles depending on driving conditions. The airbox is capped with an insulated metallic lid that provides both a rugged aesthetic and an additional thermal barrier against engine bay heat. This is a direct bolt-on upgrade that typically installs in under an hour using standard tools.

• Part Number: 18847
• Filter Type: Pro5 (5-layer oiled cotton gauze)
• Washable/Reusable: Yes
• Airbox Design: Enclosed with insulated metallic lid
• Maintenance Interval: Up to 40,000 miles before cleaning
• Installation: Bolt-on (no cutting/drilling required)

Fits 2013-2016 Chevrolet Silverado and GMC Sierra 2500 HD and 3500 HD (6.6L).

The Volant Performance PowerCore Cold Air Intake is engineered to provide maximum engine protection while significantly increasing airflow over the stock induction system. At the heart of this system is the Donaldson PowerCore Ultra-Web air filter, which achieves a 99.96% efficiency rating. This maintenance-free filtration technology is designed to perform for up to 150,000 miles or four years in normal driving conditions, making it an ideal choice for severe-duty work trucks and dusty, arid environments.

Volant airboxes are constructed to shield the filter from engine heat and environmental debris. The system features a smoked acrylic see-through lid for easy filter inspection and an insulated design to maintain cooler intake temperatures. Installation is a straightforward bolt-on process that utilizes factory mounting points and can typically be completed in under an hour with basic hand tools.

• Donaldson PowerCore Ultra-Web Filtration: 99.96% efficient and maintenance-free up to 150,000 miles
• Rugged Airbox Design: Shields intake air from high engine bay temperatures
• Smoked Acrylic Lid: Provides easy visual access to the filter
• Stainless Steel Clamps: High-quality hardware for a secure, corrosion-resistant seal
• Direct Bolt-On: No cutting or drilling required for installation
• Manufacturer Part Number: 155666

Fits select 2007-2008 Cadillac Escalade, Chevrolet Silverado/Suburban/Tahoe/Avalanche, and GMC Sierra/Yukon (V8).

The Volant Performance Air Intake System (MPN 15253D) is engineered to replace restrictive factory plumbing with a high-velocity induction system designed for maximum thermal protection. This system features a rugged, cross-linked polyethylene airbox that shields the filter from engine bay heat while drawing in cooler, denser ambient air. The airbox is finished with a smoked acrylic see-through lid, allowing for quick filter inspections without disassembly.

This kit includes Volant’s DryTech 3D synthetic filter, a no-oil solution that provides nearly 98% filtration efficiency. This low-maintenance filter is capable of lasting up to 50,000 miles before requiring service, depending on driving conditions. When service is needed, the filter can be vacuumed or washed with soap and water. This system is a direct bolt-on installation that typically takes under an hour using standard hand tools.

• Filter Type: DryTech 3D (Dry Synthetic, No-Oil)
• Airbox Material: Polyethylene with Smoked Acrylic Lid
• Efficiency: 98% Filtration Rating
• Maintenance: Washable and reusable; up to 50k mile service interval
• Emissions: CARB Approved (D-526-6)
• Installation: Bolt-on design, estimated under 1 hour
• Manufacturer Part Number: 15253D

Fits 2012-2015 Chevrolet Camaro LS and LT models equipped with the 3.6L engine.

The Volant Pro5 Air Intake System (MPN 15136) is engineered to replace restrictive factory plumbing with a high-flow, heat-shielded solution. This system features a cross-linked polyethylene airbox designed to insulate the intake charge from engine bay heat, while the smoked acrylic lid allows for quick visual filter inspections without disassembly. At the core of this system is the Pro5 filter, a 5-layer oiled cotton gauze media that provides 98% filtration efficiency and high-volume airflow for improved throttle response and power.

• Pro5 Filter Media: Washable and reusable 5-layer oiled cotton gauze for maximum flow and protection.
• Extended Service Intervals: Filters are designed to last up to 40,000 miles between cleanings, depending on driving conditions.
• Rugged Construction: Custom-insulated airbox shields the filter from ambient engine heat and debris.
• Smoked Acrylic Lid: Transparent top plate offers a premium look and easy maintenance checks.
• CARB Approved: Validated for emissions compliance (see ACES info for specific EO numbers).
• Direct Fit Installation: Precision-engineered for a bolt-on install that typically takes under one hour using standard hand tools.

This Ticon Industries 3.5-inch straight silicone coupler is engineered for high-performance plumbing in intake, intercooler, and turbocharger systems. Featuring 4-ply reinforcement, this coupler is built to withstand significant boost pressures and high engine bay temperatures without collapsing or swelling over time.

Ideal for custom fabrication and motorsport applications, it provides a secure, vibration-damping connection between hard piping with a 3.5-inch outer diameter. The multi-layer construction offers superior durability and heat resistance compared to standard OEM rubber hoses, ensuring reliability under demanding conditions.

• Inner Diameter: 3.5 inches (89mm)
• Construction: 4-Ply Reinforced Silicone
• Type: Straight Coupler
• Color: Black finish
• Manufacturer Part Number: 131-08903-0401

This 6-pack of K&N spring clips is engineered specifically for K&N universal air box assemblies. These clips are critical for maintaining a positive, airtight seal between the air filter element, the air box base, and the top plate to prevent unfiltered air from bypassing the intake system.

Each clip is designed for consistent tension and durability in high-performance environments. Measuring 0.75 inches wide and 4.45 inches long, these black-finished clips provide the necessary clamping force to secure your filtration components.

• Ensures a positive seal between filter, base, and top housing
• Width: 3/4 in. (0.75 in.)
• Length: 4.45 in.
• Finish: Black
• Quantity: 6 clips per package
• Manufacturer Part Number: 85-83897

Fits 2008 Pontiac Solstice GXP and Saturn Sky Red Line (L4-2.4L).

The K&N 69-8433TTK Typhoon air intake system is engineered to replace the restrictive factory air filter and intake housing, providing a more direct path for airflow to reach the engine. This system features a mandrel-bent aluminum intake tube designed to smooth and straighten airflow, reducing turbulence and allowing the engine to draw in a larger volume of air. The result is a noticeable improvement in throttle response and power across the RPM range.

This kit includes an oversized, cone-shaped K&N high-flow air filter that fits into the original air box space. The intake tube is finished in a durable black powder coat and includes integrated mounting points to accommodate the factory mass air flow (MAF) sensor and crankcase vent hose. Installation is straightforward, typically requiring 90 minutes or less using standard hand tools and existing factory mounting points.

• Manufacturer Part Number: 69-8433TTK
• Tube Material: Mandrel-bent aluminum
• Finish: Black powder-coat
• Filter Type: Reusable, oiled cotton gauze
• Service Interval: Up to 100,000 miles before cleaning (depending on conditions)
• Warranty: K&N Million Mile Limited Warranty

Fits 2015-2019 Chevrolet Corvette Z06 models equipped with the 6.2L engine.

The K&N 63-3090 AirCharger Performance Intake is engineered to replace the restrictive factory air filter and intake housing on your Corvette Z06. At the core of this system is a high-density polyethylene (HDPE) rotationally-molded tube designed to optimize airflow volume and velocity to the throttle body. By reducing turbulence and air temperature, this system provides a measurable increase in horsepower and torque.

This kit includes an oversized, conical High-Flow Air Filter featuring K&N's signature oiled cotton media, which provides superior filtration and can go up to 100,000 miles between cleanings under normal highway conditions. The system is completed by a custom heat shield that isolates the intake air from engine bay heat, ensuring a cooler, denser air charge. Designed for a straightforward installation, this entire bolt-on system can typically be installed in under 90 minutes using standard tools.

• Manufacturer Part Number: 63-3090
• Intake Tube Material: High-Density Polyethylene (HDPE)
• Filter Media: Red Oiled Cotton (Washable and Reusable)
• Service Interval: Up to 100,000 miles before cleaning required
• Includes custom heat shield and all necessary mounting hardware
• Installation Time: Approximately 90 minutes or less

Fits 2001-2005 Honda Civic DX, EX, LX, Special Edition, and Value Package models (L4-1.7L).

Replace your restrictive factory airbox and paper filter with the K&N 57-3513 FIPK (Fuel Injection Performance Kit). This system utilizes a high-density polyethylene (HDPE) rotationally-molded intake tube designed to increase airflow volume and velocity to your engine. By streamlining the air path and reducing turbulence, this kit provides a guaranteed increase in horsepower and torque.

At the heart of this system is a washable, reusable conical High-Flow Air Filter featuring oiled cotton media. The oversized design allows for high airflow and excellent filtration, with service intervals reaching up to 100,000 miles under normal highway driving conditions. A custom-fit heat shield is included to isolate the intake air from high engine bay temperatures, ensuring a cooler, denser oxygen charge. This entire bolt-on system is designed to install in less than 90 minutes using factory mounting points.

• Manufacturer Part Number: 57-3513
• Tube Material: High-Density Polyethylene (HDPE)
• Filter Media: Oiled Cotton Gauze
• Filter Style: Conical, Washable/Reusable
• Includes: Intake tube, air filter, heat shield, and all necessary mounting hardware
• Warranty: K&N Million Mile Limited Warranty

Fits 2014-2015 Chevrolet Corvette Stingray (6.2L).

The K&N 57 Series FIPK performance intake system is engineered to replace the restrictive factory air filter and intake housing on the C7 Corvette. This kit utilizes a rotationally-molded, high-density polyethylene (HDPE) tube to increase the volume of airflow to the engine while smoothing the intake path for improved horsepower and torque. The system is paired with an oversized, conical High-Flow Air Filter featuring washable oiled cotton media, allowing for service intervals up to 100,000 miles under normal highway driving conditions.

A custom-fit heat shield is included to help isolate the air filter from high engine bay temperatures, ensuring a cooler, denser intake charge. This bolt-on system is designed to install in under 90 minutes using factory mounting points and basic hand tools.

• High-density polyethylene (HDPE) rotationally-molded intake tube
• Oversized, washable High-Flow Air Filter with oiled cotton media
• Custom heat shield designed to isolate intake air from engine heat
• Direct bolt-on installation typically completed in under 90 minutes
• K&N Million Mile Limited Warranty
• Manufacturer Part Number: 57-3081