Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Authorized Brand Dealer
Fulfillment From Multiple U.S. Warehouses
Enthusiast Owned & Supported
Welcome to Atlus Automotive
Main menu
-
Performance
- Performance
-
Intake & Exhaust
- Intake & Exhaust
- Air Intake Systems
- Cold Air Intakes
- Air Intake Components
- Air Filters
- Air Filters - Drop In
- Air Filters - Direct Fit
- Air Filters - Universal Fit
- Pre-Filters
- Recharge Kits
- OE Replacement Air Intake Components
- Exhaust, Mufflers & Tips
- Catback
- Axle Back
- Muffler
- Tips
- Headers & Manifolds
- Connecting Pipes
- Catalytic Converter Direct Fit
- Catalytic Converter Universal
- Exhaust Collector
- Merge Collectors
-
Engine Upgrades
- Engine Upgrades
- Engine Components
- Camshafts
- Valve Springs, Retainers
- Head Gaskets
- Head Stud & Bolt Kits
- Main Stud & Bolt Kits
- Gasket Kits
- Engine Mounts
- Oil Catch Cans
- Oil Separators
- Throttle Bodies
- Throttle Body Spacers
- Crankshaft Dampers
- Valves
- Piston Rings
- Piston Sets - Forged - 4cyl
- Piston Sets - Cast - 4cyl
- Connecting Rods - 4Cyl
- Rotating Assemblies
- Stroker Kits
-
Turbo & Cooling
-
Fuel, Ignition & Tuning
-
Suspension & Handling
- Suspension & Handling
-
Lowering & Coilovers
-
Arms, Links & Alignment
-
Lift & Off-Road Suspension
-
Chassis & Bracing
-
Wheels & Tires
- Wheels & Tires
-
Wheels
-
Tires
-
Drivetrain & Clutch
-
Brakes
- Brakes
-
Pads & Rotors
-
Brake Kits & Calipers
-
Lines, Fluid & Hardware
-
Exterior & Lighting
- Exterior & Lighting
-
Lighting
-
Exterior Styling
-
Bumpers & Protection
-
Interior & Electronics
- Interior & Electronics
-
Interior Upgrades
-
Gauges & Electronics
-
Audio & Safety
-
Overland & Utility
- Overland & Utility
-
Bed Covers & Bed Gear
-
Steps, Racks & Storage
-
Trail & Towing
-
Maintenance & Garage
- Maintenance & Garage
-
Oil, Fluids & Filters
-
Detailing & Car Care
-
Tools & Fabrication
Your cart
Choose your Location
-
Atlus
1340 Cobb Dr, Unit 1, Eustis, FL 32736
352-234-4458
Mon – Fri: 8:30 am – 4:30 pm
Sat: 9:00 am – 2:00 pm
Sun: Closed
Product Comparison
How they are Different
|
__ __ |
|
|---|---|
| Description |
Description - __ |
| Rating |
Rating - __ |
| Vendor |
Vendor - __ |
| Color |
Color - __ |
|
|
Compare products ( / )
3196 products
3196 products
Sort by:
- Featured
- Most relevant
- Best selling
- Alphabetically, A-Z
- Alphabetically, Z-A
- Price, low to high
- Price, high to low
- Date, old to new
- Date, new to old
Mishimoto has developed a performance air intake engineered specifically for the 2015+ Subaru WRX. The intake features numerous innovative components, including a wire-reinforced lower induction hose that will not collapse under suction and boost. Dyno testing showed maximum gains of up to 33 whp and 30 wtq and peak gains of up to 28 whp and 21 wtq while maintaining safe AFRs on the stock tune. This intake has a unique and aggressive tone under acceleration and boost, and the free-flowing design amplifies turbocharger spool and BPV sounds. The stock intake duct is utilized to provide cool airflow to the high-flow Mishimoto oiled air filter, which features increased filtration surface area compared to the stock paper filter. This filter can be cleaned and reused, providing a lifetime of service. The intake is optionally available with an enclosed airbox for protection against engine bay heat-soak, and it provides a stock-like engine bay appearance as well. This unit is a complete bolt-on that functions perfectly with the stock tune and can be installed in one hour using common hand tools. Made in the USA and available with either polished, wrinkle black, or wrinkle red aluminum intake piping, this kit includes the Mishimoto Lifetime Warranty, ensuring superior product quality and craftsmanship.
- Dyno-proven gains of up to 70 whp and 70 wtq with a tune and intake using 93 octane fuel while maintaining safe AFRs on 6 speed WRX
- Dyno-proven maximum gains of up to 33 whp and 30 wtq and peak gains of up to 28 whp and 21 wtq while maintaining safe AFRs
- Extremely aggressive intake tone under acceleration and boost
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2015-2021 | Subaru | WRX | Base |
| 2015-2021 | Subaru | WRX | Limited |
| 2015-2021 | Subaru | WRX | Premium |
Mishimoto has developed a performance air intake engineered specifically for the 2015+ Subaru WRX. The intake features numerous innovative components, including a wire-reinforced lower induction hose that will not collapse under suction and boost. Dyno testing showed maximum gains of up to 33 whp and 30 wtq and peak gains of up to 28 whp and 21 wtq while maintaining safe AFRs on the stock tune. This intake has a unique and aggressive tone under acceleration and boost, and the free-flowing design amplifies turbocharger spool and BPV sounds. The stock intake duct is utilized to provide cool airflow to the high-flow Mishimoto oiled air filter, which features increased filtration surface area compared to the stock paper filter. This filter can be cleaned and reused, providing a lifetime of service. The intake is optionally available with an enclosed airbox for protection against engine bay heat-soak, and it provides a stock-like engine bay appearance as well. This unit is a complete bolt-on that functions perfectly with the stock tune and can be installed in one hour using common hand tools. Made in the USA and available with either polished or Wrinkle Black aluminum intake piping, this kit includes the Mishimoto Lifetime Warranty, ensuring superior product quality and craftsmanship.
- Dyno-proven gains of up to 70 whp and 70 wtq with a tune and intake using 93 octane fuel while maintaining safe AFRs on 6 speed WRX
- Dyno-proven maximum gains of up to 33 whp and 30 wtq and peak gains of up to 28 whp and 21 wtq while maintaining safe AFRs
- Extremely aggressive intake tone under acceleration and boost
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2015-2021 | Subaru | WRX | Base |
| 2015-2021 | Subaru | WRX | Limited |
| 2015-2021 | Subaru | WRX | Premium |
Mishimoto has developed a performance air intake engineered specifically for the 2015+ Subaru WRX. The intake features numerous innovative components, including a wire-reinforced lower induction hose that will not collapse under suction and boost. Dyno testing showed maximum gains of up to 33 whp and 30 wtq and peak gains of up to 28 whp and 21 wtq while maintaining safe AFRs on the stock tune. This intake has a unique and aggressive tone under acceleration and boost, and the free-flowing design amplifies turbocharger spool and BPV sounds. The stock intake duct is utilized to provide cool airflow to the high-flow Mishimoto oiled air filter, which features increased filtration surface area compared to the stock paper filter. This filter can be cleaned and reused, providing a lifetime of service. The intake is optionally available with an enclosed airbox for protection against engine bay heat-soak, and it provides a stock-like engine bay appearance as well. This unit is a complete bolt-on that functions perfectly with the stock tune and can be installed in one hour using common hand tools. Made in the USA and available with either polished, wrinkle black, or wrinkle red aluminum intake piping, this kit includes the Mishimoto Lifetime Warranty, ensuring superior product quality and craftsmanship.
- Dyno-proven gains of up to 70 whp and 70 wtq with Mishimoto tune and intake using 93 octane fuel while maintaining safe AFRs on 6 speed WRX (see additional images for dyno chart)
- Dyno-proven maximum gains of up to 33 whp and 30 wtq and peak gains of up to 28 whp and 21 wtq while maintaining safe AFRs on the stock tune (using 93 octane fuel)
- This product is discontinued.
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2015-2021 | Subaru | WRX | Base |
| 2015-2021 | Subaru | WRX | Limited |
| 2015-2021 | Subaru | WRX | Premium |
Unlock more power, sound, and style from your 2024+ Toyota Tacoma with the Mishimoto Performance Air Intake. Designed for drivers who want their truck to perform and sound better without compromising reliability, this intake delivers proven performance gains and an aggressive tone that transforms your driving experience. -- Dyno testing shows gains of up to 11.6 horsepower and 10.6 ft-lbs of torque, while airflow is improved by 27.7% compared to stock when the plug is removed. The carefully engineered rotomolded airbox keeps intake air temperatures close to stock, ensuring consistent performance even in demanding conditions. Under acceleration, you'll notice a deeper and more refined intake tone that adds excitement to every drive. -- Installation is simple and DIY friendly, making it an ideal weekend upgrade. With a clear written guide and video instructions, most owners can complete the install in under 30 minutes using only basic hand tools. The kit includes everything needed for a secure fit, including a specially designed flexible grommet that allows the system to maintain a proper seal during off-road chassis flex. -- Built for rugged reliability, this intake is ready for any environment. The OEM-style MAF housing maintains correct air-fuel ratios to prevent check engine lights, and the high-flow oiled or dry filter options protect your engine from dust and debris on the trail. Safe to run on a stock tune, this system not only enhances sound and performance but also improves the look of your engine bay with a clean, high-quality finish. -- Like all Mishimoto products, this Performance Air Intake is backed by the Mishimoto Lifetime Warranty for worry-free performance on and off the road.
User 1User 1
Installation Instructions
- 27.7% less restrictive than stock with the plug removed for stronger airflow and throttle response
- Enhanced intake tone delivers a deeper, more aggressive sound under acceleration
- Dyno-proven gains of up to 11.6 horsepower and 10.6 ft-lbs of torque
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2025 | Toyota | Tacoma | Limited |
| 2024-2025 | Toyota | Tacoma | SR |
| 2024-2025 | Toyota | Tacoma | SR5 |
| 2024-2025 | Toyota | Tacoma | TRD Off-Road |
| 2024-2025 | Toyota | Tacoma | TRD PreRunner |
| 2024-2025 | Toyota | Tacoma | TRD Pro |
| 2024-2025 | Toyota | Tacoma | TRD Sport |
Unlock more power, sound, and style from your 2024+ Toyota Tacoma with the Mishimoto Performance Air Intake. Designed for drivers who want their truck to perform and sound better without compromising reliability, this intake delivers proven performance gains and an aggressive tone that transforms your driving experience. -- Dyno testing shows gains of up to 11.6 horsepower and 10.6 ft-lbs of torque, while airflow is improved by 27.7% compared to stock when the plug is removed. The carefully engineered rotomolded airbox keeps intake air temperatures close to stock, ensuring consistent performance even in demanding conditions. Under acceleration, you'll notice a deeper and more refined intake tone that adds excitement to every drive. -- Installation is simple and DIY friendly, making it an ideal weekend upgrade. With a clear written guide and video instructions, most owners can complete the install in under 30 minutes using only basic hand tools. The kit includes everything needed for a secure fit, including a specially designed flexible grommet that allows the system to maintain a proper seal during off-road chassis flex. -- Built for rugged reliability, this intake is ready for any environment. The OEM-style MAF housing maintains correct air-fuel ratios to prevent check engine lights, and the high-flow oiled or dry filter options protect your engine from dust and debris on the trail. Safe to run on a stock tune, this system not only enhances sound and performance but also improves the look of your engine bay with a clean, high-quality finish. -- Like all Mishimoto products, this Performance Air Intake is backed by the Mishimoto Lifetime Warranty for worry-free performance on and off the road.
User 1User 1
Installation Instructions
- 27.7% less restrictive than stock with the plug removed for stronger airflow and throttle response
- Enhanced intake tone delivers a deeper, more aggressive sound under acceleration
- Dyno-proven gains of up to 11.6 horsepower and 10.6 ft-lbs of torque
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024-2025 | Toyota | Tacoma | Limited |
| 2024-2025 | Toyota | Tacoma | SR |
| 2024-2025 | Toyota | Tacoma | SR5 |
| 2024-2025 | Toyota | Tacoma | TRD Off-Road |
| 2024-2025 | Toyota | Tacoma | TRD PreRunner |
| 2024-2025 | Toyota | Tacoma | TRD Pro |
| 2024-2025 | Toyota | Tacoma | TRD Sport |
Help your A90 Supra breathe deeper with the Mishimoto 2020+ Toyota GR Supra 3.0L Performance Intake. The Supra has long since been the poster child for the aftermarket tuning community, with air intakes typically taking the top slot on the tuner's to-do list. While the BMW B58 that powers the Supra is a heavy hitter, the stock intake system ends up adding more restriction to your finely tuned sports car. From the flat panel filter to the tag team of resonators, this system mutes the turbocharged soundtrack and creates restrictions. The Mishimoto Performance Intake alleviates those issues, however. We started with a ground-up redesign, opting for a cross-linked polyethylene construction, with a rotational-molded design for a sleek and precise fit in the Supra's engine bay. We also traded out the flat-panel filter for an oiled cone filter to maximize airflow into the system. Also, the pair of resonator chambers have been ditched to promote airflow, along with turning up the turbocharged soundtrack. To top it off, we also made sure to include a CNC-machined turbo housing adapter featuring an OEM style quick disconnect for a simple installation. The Mishimoto 2020+ Toyota GR Supra 3.0T Performance Intake also includes the Mishimoto Lifetime Warranty for a worry-free installation.
- Increases intake and turbo sound under aggressive acceleration
- 17-percent less restrictive than stock system
- Installs in about 1 hour
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2024 | Toyota | GR Supra | 45th Anniversary Edition |
| 2021-2022 | Toyota | GR Supra | A91 Edition |
| 2023 | Toyota | GR Supra | A91-MT Edition |
| 2020-2022 | Toyota | GR Supra | Base |
| 2020 | Toyota | GR Supra | Launch Edition |
| 2020-2022 | Toyota | GR Supra | Premium |
Add some horsepower to your 2015-2017 STI with the new Mishimoto Performance Air Intake. This kit is engineered specifically for your 2015-2017 Subaru STI and includes everything needed to replace the restrictive stock airbox. Our engineers spent months fine-tuning this design in an attempt to squeak out every last bit of performance. This dyno-proven air intake provides 20 whp/18 wtq gains over the stock intake while maintaining safe air/fuel ratios, perfect for some extra punch on the street or autocross course. The Mishimoto Subaru 2015-2017 STI Performance Air Intake includes everything needed for installation, installs in under one hour, and works perfectly with the stock tune. The mandrel-bent aluminum intake pipe is available with a red or black powder-coated finish or a polished aluminum finish. This pipe utilizes the Mishimoto air straightener and CNC-machined mass airflow sensor (MAF) housing to provide accurate and consistent MAF readings, which translates into a smooth power band. To reduce air intake temperatures (IATs), the air filter has been placed outside the hot engine bay, and a powder-coated heat shield prevents any heat-soak from occurring. The Mishimoto free-flowing air filter provides a 16% greater surface area, optimal airflow, and proper filtration of dirt and debris. The included Mishimoto oiled air filter is completely serviceable, allowing for a lifetime of reliable use. Additionally, this kit includes a silicone coupler, clamps, and all other hardware necessary to complete a quick installation for easy bolt-on power. A rubber cap is provided to place over the sound symposer housing. Along with an upgrade in power, this intake also provides an aggressive and rich intake tone that is a huge improvement over the stock intake. The Mishimoto Subaru WRX/STI Performance Air Intake is designed in Delaware, USA and includes the Mishimoto Lifetime Warranty
- Mandrel-bent aluminum pipe offered in polished, wrinkle black, and wrinkle red
- Includes heat shield to protect air intake from hot engine heat
- Maximum gain: 20 whp and 18 wtq
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2015-2017 | Subaru | WRX STI | Base |
| 2015 | Subaru | WRX STI | Launch Edition |
| 2015-2017 | Subaru | WRX STI | Limited |
| 2016 | Subaru | WRX STI | Series.HyperBlue |
Add some quick horsepower to your WRX or STI with the new Mishimoto Subaru WRX/STI Performance Air Intake. This kit is engineered specifically for your 2008+ Subaru WRX or STI and includes everything needed to replace the restrictive factory airbox. Our engineers spent months fine-tuning this design in an attempt to squeak out every last bit of performance. This dyno-proven air intake provides 25 hp/25 tq gains over the OEM intake while maintaining safe air/fuel ratios, perfect for some extra punch on the street or autocross course. The Mishimoto Subaru WRX/STI Performance Air Intake includes everything needed for installation, installs in under one hour, and works perfectly with the factory tune. The mandrel bent aluminum intake pipe is available with a red or black powder-coated finish or a polished aluminum finish. This pipe utilizes the Mishimoto air straightener and CNC-machined mass airflow sensor (MAF) housing to provide accurate and consistent MAF readings, which translates into a smooth power band. To reduce air intake temperatures (IATs), the air filter has been placed outside the hot engine bay, and a powder-coated heat shield prevents any heat-soak from occurring. The Mishimoto free-flowing air filter provides a 16-percent greater surface area, optimal airflow, and proper filtration of dirt and debris. The included Mishimoto oiled air filter is completely serviceable, allowing for a lifetime of reliable use. Additionally this kit includes a silicone coupler, clamps, and all other hardware necessary to complete a quick installation for easy bolt-on power. Along with an upgrade in power, this intake also provides an aggressive and rich intake tone that is a huge improvement over the factory intake. The Mishimoto Subaru WRX/STI Performance Air Intake is made in the USA and includes the Mishimoto Lifetime Warranty, ensuring superior product quality and craftsmanship.
Installation InstructionsTechnical Bulletin
- Mandrel-bent aluminum intake pipe with air straightener and CNC-machined MAF housing
- Dyno-proven gains of 25 hp/ 25 tq at 5300 rpm
- Eliminates restrictions and improves airflow
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2009 | Subaru | Forester | XT |
| 2009-2010 | Subaru | Forester | XT Limited |
| 2010-2013 | Subaru | Forester | XT Premium |
| 2011-2013 | Subaru | Forester | XT Touring |
| 2008-2014 | Subaru | Impreza | WRX |
| 2010-2014 | Subaru | Impreza | WRX Limited |
| 2009-2014 | Subaru | Impreza | WRX Premium |
| 2008-2014 | Subaru | Impreza | WRX STI |
| 2011-2014 | Subaru | Impreza | WRX STI Limited |
| 2010 | Subaru | Impreza | WRX STI Special Edition |
Add some quick horsepower to your WRX or STI with the new Mishimoto Subaru WRX/STI Performance Air Intake. This kit is engineered specifically for your 2008+ Subaru WRX or STI and includes everything needed to replace the restrictive factory airbox. Our engineers spent months fine-tuning this design in an attempt to squeak out every last bit of performance. This dyno-proven air intake provides 25 hp/25 tq gains over the OEM intake while maintaining safe air/fuel ratios, perfect for some extra punch on the street or autocross course. The Mishimoto Subaru WRX/STI Performance Air Intake includes everything needed for installation, installs in under one hour, and works perfectly with the factory tune. The mandrel bent aluminum intake pipe is available with a red or black powder-coated finish or a polished aluminum finish. This pipe utilizes the Mishimoto air straightener and CNC-machined mass airflow sensor (MAF) housing to provide accurate and consistent MAF readings, which translates into a smooth power band. To reduce air intake temperatures (IATs), the air filter has been placed outside the hot engine bay, and a powder-coated heat shield prevents any heat-soak from occurring. The Mishimoto free-flowing air filter provides a 16-percent greater surface area, optimal airflow, and proper filtration of dirt and debris. The included Mishimoto oiled air filter is completely serviceable, allowing for a lifetime of reliable use. Additionally this kit includes a silicone coupler, clamps, and all other hardware necessary to complete a quick installation for easy bolt-on power. Along with an upgrade in power, this intake also provides an aggressive and rich intake tone that is a huge improvement over the factory intake. The Mishimoto Subaru WRX/STI Performance Air Intake is made in the USA and includes the Mishimoto Lifetime Warranty, ensuring superior product quality and craftsmanship.
Installation InstructionsTechnical Bulletin
- Mandrel-bent aluminum intake pipe with air straightener and CNC-machined MAF housing
- Dyno-proven gains of 25 hp/ 25 tq at 5300 rpm
- Eliminates restrictions and improves airflow
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2009 | Subaru | Forester | XT |
| 2009-2010 | Subaru | Forester | XT Limited |
| 2010-2013 | Subaru | Forester | XT Premium |
| 2011-2013 | Subaru | Forester | XT Touring |
| 2008-2014 | Subaru | Impreza | WRX |
| 2010-2014 | Subaru | Impreza | WRX Limited |
| 2009-2014 | Subaru | Impreza | WRX Premium |
| 2008-2014 | Subaru | Impreza | WRX STI |
| 2011-2014 | Subaru | Impreza | WRX STI Limited |
| 2010 | Subaru | Impreza | WRX STI Special Edition |
Ford has finally graced our American shores with a Focus wielding the RS badge, and we couldn't be happier. We wanted to improve and upgrade a lot of things on this car and among those priorities had to be an intake. Our engineers have spent many hours in development, performing a plethora of tests and data collection. This Is a full intake, replacing every core component in the OEM system including the airbox and the intake pipe. Our kit includes a 3in, aluminum pipe that routes all the way to the turbo, with all of the necessary bracketry to accommodate a perfect fit. The airbox has a similar design to the stock airbox, facilitating an improvemed pressure drop with an open top, exposing the filter to more air and sealing the box against the hood, keeping it fully enclosed. This airbox uses the factory air inlet ducts, grabbing air right from the front of the car and the ports are surrounded with weather stripping to avoid movement. We have put this intake through hundreds of miles of road testing and countless dyno runs to ensure repeatable and reliable max gains of 12 hp and 15 ft-lbs of torque that is safe on a stock tune. Look at our engineering blog for details below! No cutting or modification to factory components will be necessary, this kit is a direct bolt in for the 2016-2018 Ford FocusRS and of course, this product is covered with the Mishimoto Lifetime Warranty
- Air filter placed to receive maximum airflow from the front of the vehicle
- Dyno-proven maximum gains of up to 12 whp and 15 wtq on the stock tune
- Designed to work with stock tune with no additional tuning required
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2016-2018 | Ford | Focus | RS |
Ford has finally graced our American shores with a Focus wielding the RS badge, and we couldn't be happier. We wanted to improve and upgrade a lot of things on this car and among those priorities had to be an intake. Our engineers have spent many hours in development, performing a plethora of tests and data collection. This Is a full intake, replacing every core component in the OEM system including the airbox and the intake pipe. Our kit includes a 3in, aluminum pipe that routes all the way to the turbo, with all of the necessary bracketry to accommodate a perfect fit.The airbox has a similar design to the stock airbox, facilitating an improvemed pressure drop with an open top, exposing the filter to more air and sealing the box against the hood, keeping it fully enclosed. This airbox uses the factory air inlet ducts, grabbing air right from the front of the car and the ports are surrounded with weather stripping to avoid movement. We have put this intake through hundreds of miles of road testing and countless dyno runs to ensure repeatable and reliable max gains of 12 hp and 15 ft-lbs of torque that is safe on a stock tune. Look at our engineering blog for details below! No cutting or modification to factory components will be necessary, this kit is a direct bolt in for the 2016-2018 Ford FocusRS and of course, this product is covered with the Mishimoto Lifetime Warranty
- Air filter placed to receive maximum airflow from the front of the vehicle
- Dyno-proven maximum gains of up to 12 whp and 15 wtq on the stock tune
- Designed to work with stock tune with no additional tuning required
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2016-2018 | Ford | Focus | RS |
When you're trying to make power, airflow is critical. Reducing restriction within the intake and exhaust systems is the most sensible way to improve engine efficiency. However, if you have a 1.8T/2.0T MK7 with an upgraded air intake, there might be something you're missing. The air intake system on the MQB platform mates to the turbocharger via a plastic turbocharger inlet pipe. Our team has found that this component is quite restrictive and in desperate need of enhancement. Mishimoto's Turbo Inlet Pipe for the MK7 chassis is constructed from durable, CNC-machined cast aluminum. Compared to the stock plastic unit, this is far more durable and eliminates any chances of long-term part degradation. Along with durability, we've also increased internal volume and enhanced the pathway of air. These design alterations result in significant improvements in airflow and a quicker turbo spool. This turbo inlet pipe fits with the stock intake, the Mishimoto Performance Intake , and most aftermarket intake systems. No tuning is required for installation, although the benefits of this component will amplify as more upgrades are made on your MK7. As with all Mishimoto MK7 products, this inlet pipe includes our signature Mishimoto Lifetime warranty.
- Solid CNC-machined aluminum mount ensures a secure and leak-free fit
- Precise, durable CNC-machined cast aluminum construction
- Improved flow for quicker turbo spool
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2015-2020 | Audi | A3 | Premium |
| 2015-2020 | Audi | A3 | Premium Plus |
| 2015-2019 | Audi | A3 | Prestige |
| 2019 | Audi | A3 | Titanium |
| 2015-2020 | Audi | A3 Quattro | Premium |
| 2015-2020 | Audi | A3 Quattro | Premium Plus |
| 2015-2019 | Audi | A3 Quattro | Prestige |
| 2020 | Audi | S3 | Premium |
| 2015-2020 | Audi | S3 | Premium Plus |
| 2015-2019 | Audi | S3 | Prestige |
| 2016 | Volkswagen | Golf | Base |
| 2015 | Volkswagen | Golf | Launch Edition |
| 2015-2018 | Volkswagen | Golf | S |
| 2015-2016,2018 | Volkswagen | Golf | SE |
| 2015-2016 | Volkswagen | Golf | SEL |
| 2017 | Volkswagen | Golf | Wolfsburg Edition |
| 2017-2019 | Volkswagen | Golf Alltrack | S |
| 2017-2019 | Volkswagen | Golf Alltrack | SE |
| 2017-2019 | Volkswagen | Golf Alltrack | SEL |
| 2015-2019 | Volkswagen | Golf R | Base |
| 2016 | Volkswagen | Golf SportWagen | Limited Edition |
| 2015-2019 | Volkswagen | Golf SportWagen | S |
| 2015-2018 | Volkswagen | Golf SportWagen | SE |
| 2015-2018 | Volkswagen | Golf SportWagen | SEL |
| 2015-2021 | Volkswagen | GTI | Autobahn |
| 2019 | Volkswagen | GTI | Rabbit Edition |
| 2015-2021 | Volkswagen | GTI | S |
| 2015-2021 | Volkswagen | GTI | SE |
| 2017 | Volkswagen | GTI | Sport |
The VW/Audi MQB platform combines the practicality of an everyday driver with a powerful turbocharged engine, capable chassis, and an extraordinary differential capable of some awe-inspiring lap times. These highly innovative vehicles demand upgrades that match the impressive engineering Volkswagen and Audi poured into the platform. Thus, the team at Mishimoto set forth to develop the most effective performance air intake for the 2015-2021 Volkswagen MK7 and Audi MQB-platform equipped with the venerable Gen-3 EA888 engine. Airbox volume, shape, and construction material all play a part in delivering maximum airflow to your engine. Our engineering team created an extremely precise rotational-molded thermoplastic airbox that eliminates restrictions, supplies maximum cool-air entry, and improves engine bay aesthetics. The use of thermoplastic material ensures the air intake system will incur minimum engine bay heat soak and provides unmatched durability for years of service in the harshest environments. Our airbox was designed using the latest in 3D printing, CAD modeling, and flow bench technology. As a result, we reduced air intake restriction by 51.7-percent over the stock intake system. This improvement in flow resulted in dyno-proven gains of up to 5.27 HP and 9.23 lb-ft of torque on a stock-tuned MK7 GTI. In addition, this intake kit includes our high-flow oiled air filter, which provides a 52-percent increase in surface area compared to the stock panel filter. This filter provides substantial airflow while preventing harmful contaminants from entering your intake tract. The Mishimoto 2015-2021 Volkswagen MK7 and Audi MQB-platform Performance Intake is a complete bolt-on kit and includes provisions for the factory SAI system. As with all Mishimoto products, this performance intake kit includes our signature Mishimoto Lifetime Warranty.
- Dyno-proven bolt-on power gains of up to 5.27 HP and 9.23 lb-ft of torque on stock engine/tuning
- Reduces air intake restriction by 51.7-percent compared to the stock intake system
- Provides safe operation on a stock ECU tune
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2015-2020 | Audi | A3 | Premium |
| 2015-2020 | Audi | A3 | Premium Plus |
| 2015-2019 | Audi | A3 | Prestige |
| 2019 | Audi | A3 | Titanium |
| 2015-2020 | Audi | A3 Quattro | Premium |
| 2015-2020 | Audi | A3 Quattro | Premium Plus |
| 2015-2019 | Audi | A3 Quattro | Prestige |
| 2020 | Audi | S3 | Premium |
| 2015-2020 | Audi | S3 | Premium Plus |
| 2015-2019 | Audi | S3 | Prestige |
| 2016 | Volkswagen | Golf | Base |
| 2015 | Volkswagen | Golf | Launch Edition |
| 2015-2018 | Volkswagen | Golf | S |
| 2015-2016,2018 | Volkswagen | Golf | SE |
| 2015-2016 | Volkswagen | Golf | SEL |
| 2017 | Volkswagen | Golf | Wolfsburg Edition |
| 2017-2019 | Volkswagen | Golf Alltrack | S |
| 2017-2019 | Volkswagen | Golf Alltrack | SE |
| 2017-2019 | Volkswagen | Golf Alltrack | SEL |
| 2015-2019 | Volkswagen | Golf R | Base |
| 2016 | Volkswagen | Golf SportWagen | Limited Edition |
| 2015-2019 | Volkswagen | Golf SportWagen | S |
| 2015-2018 | Volkswagen | Golf SportWagen | SE |
| 2015-2018 | Volkswagen | Golf SportWagen | SEL |
| 2015-2021 | Volkswagen | GTI | Autobahn |
| 2019 | Volkswagen | GTI | Rabbit Edition |
| 2015-2021 | Volkswagen | GTI | S |
| 2015-2021 | Volkswagen | GTI | SE |
| 2017 | Volkswagen | GTI | Sport |
The Mazda Miata is known as the ultimate driver's car. It's designed to be light and nimble, making for a rewarding driving experience. The Mishimoto 2016-2021 Miata intake creates a sound that enhances this driving experience even more while looking amazing in your engine bay. The Miata air intake pipe is available in a polished, wrinkle black, or wrinkle red finish to match whatever style you're going for. To keep with the lightweight mentality, this 2016-2021 Miata intake features an aluminum airbox to save on weight. The stock intake duct is utilized to supply cold air to the intake filter, while the CNC-machined MAF housing makes for accurate sensor readings. This ND Miata air intake features a high-flow filter to let your engine breathe, as you rip down back roads with the gas pedal mashed to the floor. As with all our 2016-2021 Miata parts, the Mishimoto Lifetime Warranty ensures high-quality parts and performance for the life of your Miata intake.
- Smooth design eliminates restrictions and improves airflow
- Aluminum intake pipe includes CNC-machined MAF housing
- Highly aggressive intake tone under acceleration
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2020 | Mazda | MX-5 Miata | 100th Anniversary Special Edition |
| 2016-2021 | Mazda | MX-5 Miata | Club |
| 2016-2021 | Mazda | MX-5 Miata | Grand Touring |
| 2020 | Mazda | MX-5 Miata | RF 100th Anniversary Special Edition |
| 2017-2021 | Mazda | MX-5 Miata | RF Club |
| 2017-2021 | Mazda | MX-5 Miata | RF Grand Touring |
| 2016-2021 | Mazda | MX-5 Miata | Sport |
Unlock the full potential of your 2023+ Toyota GR Corolla with our performance air intake. Engineered for a direct-fit application, this intake system delivers dyno-proven gains of up to 4 horsepower and 4 ft-lbs of torque, giving your turbocharged G16E-GTS engine the extra power it craves. Designed to operate flawlessly without triggering check engine lights, this system ensures smooth performance while providing a 42% increase in exiting flow rate for improved efficiency. -- The injection-molded MAF housing is precisely calibrated to maintain accurate sensor readings, optimizing fuel delivery and throttle response. A 10.5% reduction in airflow restriction under low-load conditions enhances drivability, while the system's ability to maintain cooler intake temperatures under high-load driving keeps performance consistent. The deep, aggressive intake tone under acceleration amplifies the driving experience, making every gear change more exhilarating. Complete with a high-flow oiled air filter and backed by the Mishimoto Lifetime Warranty, this intake is the perfect upgrade for any GR Corolla enthusiast looking for improved power, sound, and reliability.
User 1User 1
User 1
- Dyno-proven gains of up to 4hp and 4 ft-lbs of torque
- Designed to operate without triggering CEL codes
- 42% increase in exiting flowrate
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2023-2024 | Toyota | GR Corolla | Circuit Edition |
| 2023-2025 | Toyota | GR Corolla | Core |
| 2023 | Toyota | GR Corolla | Morizo Edition |
| 2024-2025 | Toyota | GR Corolla | Premium |
| 2025 | Toyota | GR Corolla | Premium Plus |
The BMW G8X M2, M3, and M4 are automotive engineering masterpieces and Mishimoto is committed to highlighting every ounce of their potential, including their auditory prowess. This Mishimoto open airbox performance intake is designed to unleash the sound of power from the S58 under the hood of your 2021+ BMW G8X M2/M3/M4.---- The open-element design of this intake is fine-tuned to allow your turbos to breathe freely and deliver an enhanced and aggressive engine note. Get ready to roll down the windows, punch the throttle, turn heads, and ignite your passion for driving. With this intake installed, you'll get to revel in the sound of turbo spool and BMW's legendary induction sound with every RPM.----The Mishimoto 2021+ BMW G8X M2/M3/M4 open airbox performance intake is engineered as a complete bolt-on kit and includes everything you need, making installation a breeze. The durable steel heat shields are powder coated in a sleek micro-wrinkle black finish to withstand the harshest environments while adding to the aggressive styling of the G8X engine bay. Two high-quality washable oiled filters protect your S58's sensitive internals from dust and debris, while the rotational-molded intake tubes isolate the intake air from engine bay heat. Like all Mishimoto BMW products, this intake is backed by the Mishimoto Lifetime Warranty for as long as you own the vehicle.----If you're ready to unleash the true sound of your 2021+ BMW G8X M2/M3/M4 and experience the thrill of auditory performance, then it's time to upgrade your driving experience with Mishimoto's open airbox performance intake.
User 1- Open filter elements and black powder coated heatshields for a sleek and aggressive look
- Installs in less than 1 hour with no need to remove the front bumper or undertray
- Greatly enhances turbo spool and induction sounds
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2023-2025 | BMW | M2 | Base |
| 2021-2024 | BMW | M3 | Base |
| 2021-2025 | BMW | M3 | Competition |
| 2022-2025 | BMW | M3 | Competition xDrive |
| 2024 | BMW | M3 | CS |
| 2021-2026 | BMW | M4 | Base |
| 2021-2023,2025-2026 | BMW | M4 | Competition |
| 2022-2026 | BMW | M4 | Competition xDrive |
| 2025 | BMW | M4 | CS |
| 2023 | BMW | M4 | CSL |
The M3 has undergone significant evolution over the years, with each new iteration bringing something new to the table. From the brilliant widebody E30 of the eighties to the exotic sounding V8-powered E9X, each generation has its own identity but holds true to the goals of providing an amazing driving experience. The G8X gets one of the most potent engines produced by BMW to date, the S58B30, along with an option for AWD. Enhancing the S58 was something we set our sights on soon after acquiring a G80 of our own, the first project being our air intake system. Airbox volume, shape, and construction material all play a part in delivering maximum airflow to your engine. Our engineering team created extremely precise rotational-molded thermoplastic airboxes that eliminate restrictions, supply maximum cool-air entry via two additional ports that open to the wheel wells, and improve engine bay aesthetics. The use of thermoplastic material ensures the air intake system will incur minimum engine bay heat soak and provides unmatched durability for years of service in the harshest environments. Our airboxes were designed using the latest in 3D printing, CAD modeling, and flow bench technology. As a result, we reduced air intake restriction by 13 percent on the driver-side intake tract and 22.8 percent on the passenger-side intake tract. For proper filtration, this kit includes dual high-flow oiled air filters which provide improved filter surface area and improved airflow over the stock panel filters. In addition to the flow benefits, our intake system provides a significant amplification of turbocharger spool and bypass valve venting. These enhanced sounds provide a new level of enjoyment, adding to the incredible driving experience you expect from a BMW M-Series. The Mishimoto 2021+ BMW G8X M2/M3/M4 Performance Intake is a complete bolt-on kit and includes all necessary components for an easy installation.
Installation Instructions- Reduces intake restriction by up to 22.8-percent for more power potential
- Provides safe operation on a stock ECU tune
- Aggressive intake tone under acceleration
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2023-2025 | BMW | M2 | Base |
| 2021-2024 | BMW | M3 | Base |
| 2021-2025 | BMW | M3 | Competition |
| 2022-2025 | BMW | M3 | Competition xDrive |
| 2024 | BMW | M3 | CS |
| 2021-2026 | BMW | M4 | Base |
| 2021-2023,2025-2026 | BMW | M4 | Competition |
| 2022-2026 | BMW | M4 | Competition xDrive |
| 2025 | BMW | M4 | CS |
| 2023 | BMW | M4 | CSL |
Do want power, styling, and durability? The Mishimoto Focus ST intake has them all. With dyno proven maximum gains of 6 whp and 5 wtq, this Focus ST intake offers a respectable boost in power for running only the stock tune. The 3" mandrel-bent aluminum pipe offers superior airflow and styling, as it's available with a polished or wrinkle black powder-coat finish. We like to keep things cool here at Mishimoto, so the black powder-coated airbox keeps that unwanted hot air from entering the air filter. The airbox also utilizes the stock cool air duct, to help drop air intake temperatures even more. This Focus ST intake kit includes everything that you need for a direct-fit installation, even a IAT adapter to fit the 2016 model. The Mishimoto Lifetime Warranty will make sure all your Mishimoto Focus ST parts are performing perfectly!
- Air filter placed to receive maximum airflow from the front of the vehicle
- Dyno-proven maximum gains of up to 6 whp and 5 wtq on the stock tune
- Designed to work with stock tune with no additional tuning required
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2013-2018 | Ford | Focus | ST |
Do want power, styling, and durability? The Mishimoto Focus ST intake has them all. With dyno proven maximum gains of 6 whp and 5 wtq, this Focus ST intake offers a respectable boost in power for running only the stock tune. The 3" mandrel-bent aluminum pipe offers superior airflow and styling, as it's available with a polished or wrinkle black powder-coat finish. We like to keep things cool here at Mishimoto, so the black powder-coated airbox keeps that unwanted hot air from entering the air filter. The airbox also utilizes the stock cool air duct, to help drop air intake temperatures even more. This Focus ST intake kit includes everything that you need for a direct-fit installation, even a IAT adapter to fit the 2016 model. The Mishimoto Lifetime Warranty will make sure all your Mishimoto Focus ST parts are performing perfectly!
- Air filter placed to receive maximum airflow from the front of the vehicle
- Dyno-proven maximum gains of up to 6 whp and 5 wtq on the stock tune
- Designed to work with stock tune with no additional tuning required
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2013-2018 | Ford | Focus | ST |
Give your Fiesta ST the airflow it deserves. The Mishimoto Fiesta ST intake cranks the power up by 6 whp and 10 wtq while running on the stock tune. The mandrel-bent aluminum piping allows for smooth, uninterrupted airflow straight to the turbo inlet hose and into the turbo. The Fiesta ST intake pipe also features a CNC-machined MAF housing that uses the stock MAF sensor, and it includes two CCV ports with a silicone PCV adapter. The piping is available with either a polished, wrinkle black, or wrinkle red finish to maximize engine bay aesthetics. This Fiesta ST intake also features a black powder-coated airbox to keep the air filter isolated from unwanted engine bay heat. This will help keep your air charge nice and cool, and, like all Mishimoto Fiesta ST parts, this intake comes with the unbeatable Mishimoto Lifetime Warranty!
- Dyno-proven maximum gains of up to 6 whp and 10 wtq on the stock tune
- Designed to work with stock tune with no additional tuning required
- Highly aggressive intake tone under acceleration
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2016-2019 | Ford | Fiesta | ST |
Give your Fiesta ST the airflow it deserves. The Mishimoto Fiesta ST intake cranks the power up by 6 whp and 10 wtq while running on the stock tune. The mandrel-bent aluminum piping allows for smooth, uninterrupted airflow straight to the turbo inlet hose and into the turbo. The Fiesta ST intake pipe also features a CNC-machined MAF housing that uses the stock MAF sensor, and it includes two CCV ports. The piping is available with either a polished, wrinkle black, or wrinkle red finish to maximize engine bay aesthetics. This Fiesta ST intake also features a black powder-coated airbox to keep the air filter isolated from unwanted engine bay heat. This will help keep your air charge nice and cool, and, like all Mishimoto Fiesta ST parts, this intake comes with the unbeatable Mishimoto Lifetime Warranty!
- Dyno-proven maximum gains of up to 6 whp and 10 wtq on the stock tune
- Designed to work with stock tune with no additional tuning required
- Highly aggressive intake tone under acceleration
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2014-2015 | Ford | Fiesta | ST |
Mishimoto has developed a performance air intake engineered specifically for the 2012+ BMW F30 w/ N20/N26 engines! This Performance Air Intake is safe to use with the stock tune as it will not hurt air/fuel ratios under load. This intake has a unique and aggressive tone under acceleration and boost, and the free-flowing design amplifies turbocharger spool and BPV sounds. Check out the video to hear the tone. The stock intake duct is utilized to provide cool airflow to the Mishimoto High-Flow Oiled Air Filter, which features increased filtration surface area compared to the stock paper filter. This filter can be cleaned and reused, providing a lifetime of service. The intake includes an enclosed airbox that collects all of the cold outside air from the front of the engine. The airbox is made from 5052 aluminum with a black powder-coated finish to reduce weight compared to a steel intake box, and to prevent against any corrosion. The airbox also protects against engine bay heat-soak, and it provides a unique engine bay appearance. This unit is a complete bolt-on that functions perfectly with the stock tune. This kit includes the Mishimoto Lifetime Warranty, ensuring superior product quality and craftsmanship.
- Powder-coated black airbox keeps unwanted hot air from entering the air filter
- Functions with the stock intake duct which supplies cold air to intake filter
- Highly aggressive intake tone under acceleration
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2012 | BMW | 328i | Base |
Mishimoto has developed a performance air intake engineered specifically for the 2012+ BMW F30 w/ N20/N26 engines! This Performance Air Intake is safe to use with the stock tune as it will not hurt air/fuel ratios under load. This intake has a unique and aggressive tone under acceleration and boost, and the free-flowing design amplifies turbocharger spool and BPV sounds. Check out the video to hear the tone. The stock intake duct is utilized to provide cool airflow to the Mishimoto High-Flow Oiled Air Filter, which features increased filtration surface area compared to the stock paper filter. This filter can be cleaned and reused, providing a lifetime of service. The intake includes an enclosed airbox that collects all of the cold outside air from the front of the engine. The airbox is made from 5052 aluminum with a black powder-coated finish to reduce weight compared to a steel intake box, and to prevent against any corrosion. The airbox also protects against engine bay heat-soak, and it provides a unique engine bay appearance. This unit is a complete bolt-on that functions perfectly with the stock tune. This kit includes the Mishimoto Lifetime Warranty, ensuring superior product quality and craftsmanship.
- Powder-coated black airbox keeps unwanted hot air from entering the air filter
- Functions with the stock intake duct which supplies cold air to intake filter
- Highly aggressive intake tone under acceleration
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2012 | BMW | 328i | Base |
"Mishimoto has developed a performance air intake engineered specifically for the 1999--2005 BMW E46 323i/325i/328i. This intake is safe to use with the stock tune as it will not hurt air/fuel ratios under load. This intake has a unique and aggressive tone under load, and the free-flowing design amplifies engine induction sounds. Check out the video to hear the tone. The stock intake duct is utilized to provide cool airflow to the high-flow Mishimoto oiled air filter, which features increased filtration surface area compared to the stock paper filter. This filter can be cleaned and reused, providing a lifetime of service. The intake includes a steel heatshield with pre-assembled rubber trim to keep hot engine air out and help draw cold outside air into the filter. This unit is a complete bolt-on that functions perfectly with the stock tune and can be installed in one hour using common hand tools. This performance air intake kit is also fully functional with our silicone intake hoses as well. This kit includes the Mishimoto Lifetime Warranty, ensuring superior product quality and craftsmanship."
- Black powder-coated heatshield keeps unwanted hot air from entering the air filter
- Works with the stock or Mishimoto silicone intake hoses
- Improves engine tone
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2000 | BMW | 323Ci | Base |
| 1999-2000 | BMW | 323i | Base |
| 1999 | BMW | 323is | Base |
| 2001-2006 | BMW | 325Ci | Base |
| 2001-2005 | BMW | 325i | Base |
| 2001-2005 | BMW | 325xi | Base |
| 2000 | BMW | 328Ci | Base |
| 1999-2000 | BMW | 328i | Base |
| 1999 | BMW | 328is | Base |
Mishimoto has developed a performance air intake engineered specifically for the 2001--2006 BMW E46 330i. This E46 intake is safe to use with the stock tune as it will not hurt air/fuel ratios under load. This intake has a unique and aggressive tone, and the free-flowing design amplifies engine induction sounds. The stock E46 intake duct is utilized to provide cool airflow to the high-flow Mishimoto oiled air filter, which features increased filtration surface area compared to the stock paper filter. This filter can be cleaned and reused, providing a lifetime of service. The E46 intake includes a steel heatshield with pre-assembled rubber trim to keep hot engine air out and help draw cold outside air in. This unit is a complete bolt-on that functions perfectly with the stock tune and can be installed in one hour using common hand tools. This performance E46 intake kit is also fully functional with the Mishimoto Silicone E46 Intake Hoses. As with all Mishimoto E46 parts, this kit includes the Mishimoto Lifetime Warranty, ensuring superior product quality and craftsmanship.
- Dyno proven peak gains of 7 whp and 9 wtq on the stock tune
- Highly aggressive intake tone under acceleration
- No tune required
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2001-2006 | BMW | 330Ci | Base |
| 2001-2005 | BMW | 330i | Base |
| 2001-2005 | BMW | 330xi | Base |
Helping your engine breathe better is a great way to extract maximum performance for a small investment. In addition, intake/exhaust modifications are fantastic steppingstones that provide even greater benefits as you begin to upgrade other systems of your vehicle. Following the release of our Performance Intake for the 2017-2021 Civic Type R, our engineering team found another aspect of the induction system that could benefit from innovation. The stock turbo inlet pipe is a very sturdy cast-aluminum component that supplies ample airflow for stock and lightly modified vehicles. Despite this, the internal pathway leaves room for improvement for those seeking maximum airflow. Using the latest in 3D printing, CAD modeling, and flow bench technology, we created an optimal pathway for airflow from the air intake box to the turbocharger. These enhancements result in an inlet pipe that is 16.7-percent less restrictive than the stock unit. Our 2017-2021 Civic Type R turbo inlet tube is constructed with a robust CNC-machined cast-aluminum turbo compressor inlet connection flange. This mating surface is designed to OEM specifications, providing a perfect bolt-on fit. The upper portion of the tube is fabricated from mandrel-bent aluminum piping, which is professionally TIG welded to the cast lower. This kit includes a 4-ply silicone coupler to mate the Mishimoto Performance Intake MAF housing with our new inlet tube, as well as high-quality stainless steel worm-gear clamps and an EVAP hose adapter flange to make installation a breeze. We offer the option of either red or black powder-coated finish, providing an excellent aesthetic upgrade for your engine bay. As with all our products, this Inlet Pipe Upgrade Kit includes our signature Mishimoto Lifetime Warranty.
Installation Instructions- Larger diameter inlet pipe reduces pre-turbo air restriction to improve spool
- Fits 2017-2021 Honda Civic Type R with Mishimoto Performance Intake
- Precision CNC-machined cast-aluminum turbo inlet connection
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2021 | Honda | Civic | Type R |
| 2021 | Honda | Civic | Type R Limited Edition |
Helping your engine breathe better is a great way to extract maximum performance for a small investment. In addition, intake/exhaust modifications are fantastic steppingstones that provide even greater benefits as you begin to upgrade other systems of your vehicle. Following the release of our Performance Intake for the 2017-2021 Civic Type R, our engineering team found another aspect of the induction system that could benefit from innovation. The stock turbo inlet pipe is a very sturdy cast-aluminum component that supplies ample airflow for stock and lightly modified vehicles. Despite this, the internal pathway leaves room for improvement for those seeking maximum airflow. Using the latest in 3D printing, CAD modeling, and flow bench technology, we created an optimal pathway for airflow from the air intake box to the turbocharger. These enhancements result in an inlet pipe that is 16.7-percent less restrictive than the stock unit. Our 2017-2021 Civic Type R turbo inlet tube is constructed with a robust CNC-machined cast-aluminum turbo compressor inlet connection flange. This mating surface is designed to OEM specifications, providing a perfect bolt-on fit. The upper portion of the tube is fabricated from mandrel-bent aluminum piping, which is professionally TIG welded to the cast lower. This kit includes a 4-ply silicone coupler to mate the Mishimoto Performance Intake MAF housing with our new inlet tube, as well as high-quality stainless steel worm-gear clamps and an EVAP hose adapter flange to make installation a breeze. We offer the option of either red or black powder-coated finish, providing an excellent aesthetic upgrade for your engine bay. As with all our products, this Inlet Pipe Upgrade Kit includes our signature Mishimoto Lifetime Warranty.
Installation Instructions- Larger diameter inlet pipe reduces pre-turbo air restriction to improve spool
- Fits 2017-2021 Honda Civic Type R with Mishimoto Performance Intake
- Precision CNC-machined cast-aluminum turbo inlet connection
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2021 | Honda | Civic | Type R |
| 2021 | Honda | Civic | Type R Limited Edition |
It's time to turn up the heat on your hot-Honda with the Mishimoto Performance Intake Kit for you 2017-2021 Honda Civic Type R. The Civic Type R has a long history of showing off the maximum potential that Honda can achieve on its Civic platform. However, we here in the States never had the opportunity to experience Honda's hottest hatchbacks until the FK8 made its way across the Pacific Ocean.Even though the CTR is the cream of the crop when it comes to Honda's compact chassis, It's still a mass-produced car, meaning there is still room to improve, especially when it comes to the intake system. Luckily, the OEM engineers laid the ground work for us attaching an aluminum runner from the turbo to the induction boot. This meant we only had to focus on what was attached to the end of the runner. For starters, we ditched the turbulence generating, accordion-styled intake hose and replaced it with 5 layers of silicone embedded with heat-resistant fibers. Our new and improved hose is also reinforced with steel wire ensuring that it keeps its shape even under the impressive boost the K20C1 puts out. On top of strengthening the intake boot, We've also made sure to increase the diameter and smooth out the interior which greatly assists the overall 42-percent increase in flow throughout the full system.The other contributing factors to our air flow increase are our precision adjusted MAF housing and improved airbox. We started by first separating the two, and then redesigning the MAF housing to ensure an increased flow but also retain safe fuel trim perimeters and run check engine light free on the stock tune. Our airbox grew in size to accommodate our freer flowing filter, and retains the factory rubber snorkel securing the dedicated intake channel incorporated in the CTR?s hood. Combining all of these improvements unlocks a max gain of 16.7 whp and 20.1 wtq from your 2.0T.The stealth black color scheme retains an OEM+ look to your Type R?s engine ba
User 1Installation Instructions
- Provides max gains of 16.7 whp / 20.1 wtq while maintaining safe A/F ratios
- 42-percent less restrictive than stock airbox, filter, and elbow
- No tune required
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2017-2021 | Honda | Civic | Type R |
| 2021 | Honda | Civic | Type R Limited Edition |
Mishimoto has developed a performance air intake engineered specifically for the 2014-2019 Mercedes CLA45 AMG! The intake features numerous innovative components, including a silicone turbo inlet hose that contains a co-molded CNC block for the stock sensors and breather ports! The silicone inlet hose was designed with smooth contours and transitions for maximum airflow compared to the stock rubber hose. The combination of this silicone inlet hose and our free-flowing Mishimoto air filter translated to massive gains of 20 whp and 17 wtq at 5900RPM! This intake is safe to use with the stock tune as it will not hurt air/fuel ratios under load. This intake has a unique and aggressive tone under acceleration and boost, and the free-flowing design amplifies turbocharger spool and BPV sounds. Check out the video to hear the tone. The stock intake duct is utilized to provide cool airflow to the Mishimoto High-Flow Oiled Air Filter, which features increased filtration surface area compared to the stock paper filter. This filter can be cleaned and reused, providing a lifetime of service. The intake includes an enclosed airbox that collects all of the cold outside air from the front of the engine. The airbox is made from 5052 aluminum with a black powder-coated finish to reduce weight compared to a steel intake box, and to prevent against any corrosion. The airbox also protects against engine bay heat-soak, and it provides a stock-like engine bay appearance. This unit is a complete bolt-on that functions perfectly with the stock tune and can be installed in one hour using common hand tools. This kit includes the Mishimoto Lifetime Warranty, ensuring superior product quality and craftsmanship.in
- 4-in high-flow filter operates at up to 2,000 CFM, and eliminates the restrictive 3-in inlet in the stock air intake system
- Mishimoto High-Flow Oiled Air Filter placed to receive maximum airflow from the front of the vehicle
- Dyno-proven maximum gains of up to 20 whp and 17 wtq on the stock tune
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2014-2019 | Mercedes-Benz | CLA45 AMG | 4Matic |
Our performance air intake for the 2022+ Honda Civic Si is designed to unlock the full potential of your turbocharged engine. Engineered for a perfect direct fit, this intake delivers an impressive 50.7% reduction in restriction compared to the stock system, allowing your engine to breathe more freely and respond more aggressively to throttle input. Dyno-proven gains of up to 4.9 horsepower and 4.7 ft-lbs of torque ensure a noticeable boost in performance, while the improved intake tone under acceleration adds an aggressive edge to your driving experience. -- The injection-molded MAF housing features glass fiber-reinforced nylon for optimal durability while seamlessly integrating with the stock system. Included in this kit is the Mishimoto High-Flow Oiled Air Filter, designed to maximize filtration while maintaining high airflow. Installation is simple and straightforward, making it an easy upgrade for any enthusiast. Like all Mishimoto products, this intake is backed by our Lifetime Warranty, guaranteeing long-lasting performance and reliability for your Civic Si.
User 1User 1
- Dyno-proven gains of up to 4.9 hp and 4.7 ft-lbs of torque
- 50.7% less restrictive than stock air intake
- Improved intake tone under acceleration
This Part Fits:
| Year | Make | Model | Submodel |
|---|---|---|---|
| 2023-2025 | Acura | Integra | A-Spec |
| 2023-2025 | Acura | Integra | Base |
| 2022-2024 | Honda | Civic | EX |
| 2022-2023 | Honda | Civic | EX-L |
| 2022-2026 | Honda | Civic | Si |
| 2022-2024 | Honda | Civic | Sport Touring |
| 2022-2024 | Honda | Civic | Touring |
Showing 750/3196
Explore Related Collections
- Choosing a selection results in a full page refresh.
- Opens in a new window.