Mishimoto has developed a performance air intake engineered specifically for the 2014-2019 Mercedes CLA45 AMG! The intake features numerous innovative components, including a silicone turbo inlet hose that contains a co-molded CNC block for the stock sensors and breather ports! The silicone inlet hose was designed with smooth contours and transitions for maximum airflow compared to the stock rubber hose. The combination of this silicone inlet hose and our free-flowing Mishimoto air filter translated to massive gains of 20 whp and 17 wtq at 5900RPM! This intake is safe to use with the stock tune as it will not hurt air/fuel ratios under load. This intake has a unique and aggressive tone under acceleration and boost, and the free-flowing design amplifies turbocharger spool and BPV sounds. Check out the video to hear the tone. The stock intake duct is utilized to provide cool airflow to the Mishimoto High-Flow Oiled Air Filter, which features increased filtration surface area compared to the stock paper filter. This filter can be cleaned and reused, providing a lifetime of service. The intake includes an enclosed airbox that collects all of the cold outside air from the front of the engine. The airbox is made from 5052 aluminum with a black powder-coated finish to reduce weight compared to a steel intake box, and to prevent against any corrosion. The airbox also protects against engine bay heat-soak, and it provides a stock-like engine bay appearance. This unit is a complete bolt-on that functions perfectly with the stock tune and can be installed in one hour using common hand tools. This kit includes the Mishimoto Lifetime Warranty, ensuring superior product quality and craftsmanship.in

• 4-in high-flow filter operates at up to 2,000 CFM, and eliminates the restrictive 3-in inlet in the stock air intake system
• Mishimoto High-Flow Oiled Air Filter placed to receive maximum airflow from the front of the vehicle
• Dyno-proven maximum gains of up to 20 whp and 17 wtq on the stock tune

This Part Fits:

Our performance air intake for the 2022+ Honda Civic Si is designed to unlock the full potential of your turbocharged engine. Engineered for a perfect direct fit, this intake delivers an impressive 50.7% reduction in restriction compared to the stock system, allowing your engine to breathe more freely and respond more aggressively to throttle input. Dyno-proven gains of up to 4.9 horsepower and 4.7 ft-lbs of torque ensure a noticeable boost in performance, while the improved intake tone under acceleration adds an aggressive edge to your driving experience. -- The injection-molded MAF housing features glass fiber-reinforced nylon for optimal durability while seamlessly integrating with the stock system. Included in this kit is the Mishimoto High-Flow Oiled Air Filter, designed to maximize filtration while maintaining high airflow. Installation is simple and straightforward, making it an easy upgrade for any enthusiast. Like all Mishimoto products, this intake is backed by our Lifetime Warranty, guaranteeing long-lasting performance and reliability for your Civic Si.

• Dyno-proven gains of up to 4.9 hp and 4.7 ft-lbs of torque
• 50.7% less restrictive than stock air intake
• Improved intake tone under acceleration

This Part Fits:

Our performance air intake for the 2022+ Honda Civic Si is designed to unlock the full potential of your turbocharged engine. Engineered for a perfect direct fit, this intake delivers an impressive 50.7% reduction in restriction compared to the stock system, allowing your engine to breathe more freely and respond more aggressively to throttle input. Dyno-proven gains of up to 4.9 horsepower and 4.7 ft-lbs of torque ensure a noticeable boost in performance, while the improved intake tone under acceleration adds an aggressive edge to your driving experience. -- The injection-molded MAF housing features glass fiber-reinforced nylon for optimal durability while seamlessly integrating with the stock system. Included in this kit is the Mishimoto High-Flow Oiled Air Filter, designed to maximize filtration while maintaining high airflow. Installation is simple and straightforward, making it an easy upgrade for any enthusiast. Like all Mishimoto products, this intake is backed by our Lifetime Warranty, guaranteeing long-lasting performance and reliability for your Civic Si.

• Dyno-proven gains of up to 4.9 hp and 4.7 ft-lbs of torque
• 50.7% less restrictive than stock air intake
• Improved intake tone under acceleration

This Part Fits:

Our performance air intake for the 2017-2020 Honda Civic Si is finally here! This intake was engineered specifically for the new turbocharged Civic and is a direct-fit modification that will provide enhanced engine performance and improved throttle response ? plus it will add a little flair under the hood! This intake has a unique and aggressive tone under acceleration and boost that will be very noticeable. The steel wire reinforced silicone intake arm improves airflow and keeps intake air temperatures under control as opposed to an aluminum design. The black-powdercoated steel airbox covers and protects the Mishimoto high performance air filter from engine bay heat and eliminates the possibility of hydrolock with the placement being closer to the hood. The box makes use of the stock air diverter found right underneath the hood that directed airflow into the stock airbox. The MAF housing has a venturi-style inlet, bringing in much smoother airflow compared to the conventional MAF housing design. This intake makes consistent dyno-proven gains of about 4hp and 4ft-lbs of torque and was designed in the USA at our Delaware headquarters. This unit is a complete bolt-on part that functions perfectly with the stock tune and includes the Mishimoto Lifetime Warranty, ensuring superior product quality and craftsmanship.

• Dyno-proven maximum gains of up to 4 whp and 4 wtq on the stock tune
• Smooth design eliminates restrictions and improves airflow
• 37-percent less restrictive than stock intake system

This Part Fits:

Our performance air intake for the 2017-2020 Honda Civic Si is finally here! This intake was engineered specifically for the new turbocharged Civic and is a direct-fit modification that will provide enhanced engine performance and improved throttle response - plus it will add a little flair under the hood! This intake has a unique and aggressive tone under acceleration and boost that will be very noticeable. The steel wire reinforced silicone intake arm improves airflow and keeps intake air temperatures under control as opposed to an aluminum design. The black-powdercoated steel airbox covers and protects the Mishimoto high performance air filter from engine bay heat and eliminates the possibility of hydrolock with the placement being closer to the hood. The box makes use of the stock air diverter found right underneath the hood that directed airflow into the stock airbox. The MAF housing has a venturi-style inlet, bringing in much smoother airflow compared to the conventional MAF housing design. This intake makes consistent dyno-proven gains of about 4hp and 4ft-lbs of torque and was designed in the USA at our Delaware headquarters. This unit is a complete bolt-on part that functions perfectly with the stock tune and includes the Mishimoto Lifetime Warranty, ensuring superior product quality and craftsmanship.

• Dyno-proven maximum gains of up to 4 whp and 4 wtq on the stock tune
• Smooth design eliminates restrictions and improves airflow
• 37-percent less restrictive than stock intake system

This Part Fits:

Our performance air intake for the 2016+ Honda Civic 1.5L Turbo is finally here! This intake was engineered specifically for the new turbocharged Civic and is a direct-fit modification that will provide enhanced engine performance and improved throttle response ? plus it will add a little flair under the hood! This intake has a unique and aggressive tone under acceleration and boost that will be very noticeable. The steel wire reinforced silicone intake arm improves airflow and keeps intake air temperatures under control as opposed to an aluminum design. The black-powdercoated steel airbox covers and protects the Mishimoto high performance air filter from engine bay heat and eliminates the possibility of hydrolock with the placement being closer to the hood. The box makes use of the stock air diverter found right underneath the hood that directed airflow into the stock airbox. The MAF housing has a venturi-style inlet, bringing in much smoother airflow compared to the conventional MAF housing design. This intake makes consistent dyno-proven gains of about 9hp and 10ft-lbs of torque and was designed in the USA at our Delaware headquarters. This unit is a complete bolt-on part that functions perfectly with the stock tune and includes the Mishimoto Lifetime Warranty, ensuring superior product quality and craftsmanship.

• Dyno-proven maximum gains of up to 9 whp and 10 wtq on the stock tune
• Smooth design eliminates restrictions and improves airflow
• Highly aggressive intake tone under acceleration

This Part Fits:

Our performance air intake for the 2016+ Honda Civic 1.5L Turbo is finally here! This intake was engineered specifically for the new turbocharged Civic and is a direct-fit modification that will provide enhanced engine performance and improved throttle response ? plus it will add a little flair under the hood! This intake has a unique and aggressive tone under acceleration and boost that will be very noticeable. The steel wire reinforced silicone intake arm improves airflow and keeps intake air temperatures under control as opposed to an aluminum design. The black-powdercoated steel airbox covers and protects the Mishimoto high performance air filter from engine bay heat and eliminates the possibility of hydrolock with the placement being closer to the hood. The box makes use of the stock air diverter found right underneath the hood that directed airflow into the stock airbox. The MAF housing has a venturi-style inlet, bringing in much smoother airflow compared to the conventional MAF housing design. This intake makes consistent dyno-proven gains of about 9hp and 10ft-lbs of torque and was designed in the USA at our Delaware headquarters. This unit is a complete bolt-on part that functions perfectly with the stock tune and includes the Mishimoto Lifetime Warranty, ensuring superior product quality and craftsmanship.

• Dyno-proven maximum gains of up to 9 whp and 10 wtq on the stock tune
• Smooth design eliminates restrictions and improves airflow
• Highly aggressive intake tone under acceleration

This Part Fits:

Our performance air intake for the 2016+ Honda Civic 1.5L Turbo is finally here! This intake was engineered specifically for the new turbocharged Civic and is a direct-fit modification that will provide enhanced engine performance and improved throttle response ? plus it will add a little flair under the hood! This intake has a unique and aggressive tone under acceleration and boost that will be very noticeable. The steel wire reinforced silicone intake arm improves airflow and keeps intake air temperatures under control as opposed to an aluminum design. The black-powdercoated steel airbox covers and protects the Mishimoto high performance air filter from engine bay heat and eliminates the possibility of hydrolock with the placement being closer to the hood. The box makes use of the stock air diverter found right underneath the hood that directed airflow into the stock airbox. The MAF housing has a venturi-style inlet, bringing in much smoother airflow compared to the conventional MAF housing design. This intake makes consistent dyno-proven gains of about 9hp and 10ft-lbs of torque and was designed in the USA at our Delaware headquarters. This unit is a complete bolt-on part that functions perfectly with the stock tune and includes the Mishimoto Lifetime Warranty, ensuring superior product quality and craftsmanship.

• Dyno-proven maximum gains of up to 9 whp and 10 wtq on the stock tune
• Smooth design eliminates restrictions and improves airflow
• Highly aggressive intake tone under acceleration

This Part Fits:

Add horsepower and sound to your Civic Si with the new Mishimoto Civic Si Performance Air Intake. This kit is engineered specifically for your 2006 -- 2011 Honda Civic Si and includes everything needed to replace the restrictive stock airbox. This dyno-proven air intake provides 8 hp and 6 tq gains over the stock intake while maintaining safe air/fuel ratios. Installation is quick and simple, perfect for some extra punch on the street or autocross course. The Mishimoto Honda Civic Si Performance Air Intake includes everything needed for installation, installs in under one hour, and works perfectly with the stock tune. The mandrel-bent aluminum intake pipe is available with a polished or black powder-coated finish. This pipe utilizes a CNC-machined mass airflow sensor (MAF) housing to provide accurate and consistent MAF readings, which translates into a smooth power band. To reduce air intake temperatures, a powder-coated heat shield is placed between the air filter and hot exhaust manifold, significantly reducing heat-soak. The Mishimoto free-flowing air filter provides an 85-percent greater surface area, optimal airflow, and proper filtration of dirt and debris. The included Mishimoto oiled air filter is completely serviceable, allowing for a lifetime of reliable use. Additionally this kit includes a silicone coupler, clamps, and all other hardware necessary to complete a quick installation for easy bolt-on power. Along with an upgrade in power, this intake also provides an aggressive and rich intake tone that is a huge improvement over the stock intake, especially when VTEC activates. The Mishimoto Honda Civic Si Performance Air Intake is designed in Delaware, USA and includes the Mishimoto Lifetime Warranty

• Optional black powder-coated heat shield keeps unwanted hot air from entering the air filter
• Dyno-proven maximum gains of up to 8 whp and 6 wtq on the stock tune
• Highly aggressive intake tone under acceleration

This Part Fits:

Add horsepower and sound to your Civic Si with the new Mishimoto Civic Si Performance Air Intake. This kit is engineered specifically for your 2006 -- 2011 Honda Civic Si and includes everything needed to replace the restrictive stock airbox. This dyno-proven air intake provides 8 hp and 6 tq gains over the stock intake while maintaining safe air/fuel ratios. Installation is quick and simple, perfect for some extra punch on the street or autocross course. The Mishimoto Honda Civic Si Performance Air Intake includes everything needed for installation, installs in under one hour, and works perfectly with the stock tune. The mandrel-bent aluminum intake pipe is available with a polished or black powder-coated finish. This pipe utilizes a CNC-machined mass airflow sensor (MAF) housing to provide accurate and consistent MAF readings, which translates into a smooth power band. To reduce air intake temperatures, a powder-coated heat shield is placed between the air filter and hot exhaust manifold, significantly reducing heat-soak. The Mishimoto free-flowing air filter provides an 85-percent greater surface area, optimal airflow, and proper filtration of dirt and debris. The included Mishimoto oiled air filter is completely serviceable, allowing for a lifetime of reliable use. Additionally this kit includes a silicone coupler, clamps, and all other hardware necessary to complete a quick installation for easy bolt-on power. Along with an upgrade in power, this intake also provides an aggressive and rich intake tone that is a huge improvement over the stock intake, especially when VTEC activates. The Mishimoto Honda Civic Si Performance Air Intake is designed in Delaware, USA and includes the Mishimoto Lifetime Warranty

• Optional black powder-coated heat shield keeps unwanted hot air from entering the air filter
• Dyno-proven maximum gains of up to 8 whp and 6 wtq on the stock tune
• Highly aggressive intake tone under acceleration

This Part Fits:

Our engineers have put a lot of RandD hours into the Mishimoto Performance Intake for the 2016-2024 Chevy Camaro 2.0T. We went through several designs to get to where we are now, and this will truly wake up your LGT motor with the help of extra air surging through your system. This kit fits all two-liter 2016 Camaros and will provide dyno proven performance gains of 21hp and 18ft-lbs of torque. We also improved pressure drop by over 40-percent, giving you increased airflow over stock. The airbox is made of steel and powder-coated black to help fight air intake temperatures, while our MAF housing is made of a glass-reinforced, plastic-injected mold with a built-in air straightener. The intake elbow is made of a five-ply silicone with steel wire reinforcement to prevent misshaping under vacuum and keep the engine heat at bay. The silicone design is an improvement over the bulky plastic intake elbow, replacing the stock sound suppression chamber attached to the turbo and giving you smoother airflow throughout. We performed hundreds of miles of road testing to ensure the safety of running it on a completely stock motor, so no tune is required! This kit comes with everything required for installation, along with a pre-oiled Mishimoto Performance Air Filter, the necessary hardware and our Mishimoto Lifetime Warranty. Check out our engineering blog for in-depth details on the design!

• Wire-reinforced silicone elbow with CNC billet fittings eliminates restrictions and improves and increases airflow capacity
• Provides max gains of 18 whp / 22 wtq while maintaining safe A/F ratios
• No tune required

This Part Fits:

Add easy horsepower to your 2013-2020 BRZ/FR-S with the Mishimoto Performance Cold-Air Intake! Our engineers spent months designing, testing, and perfecting this product to develop a 10 whp / 8 wtq bolt-on power increase. In addition to the impressive power increase, our engineering team ensured that safe A/F ratios are maintained throughout the entire powerband. The core of this intake is our mandrel-bent aluminum intake pipe that provides a smooth path for airflow. Additionally, the CNC-machined mass airflow (MAF) housing and air straightener ensure laminar airflow across the sensor to provide accurate readings. This intake is designed as a true cold-air system, with filter placement outside the hot engine bay to reduce the chance of heat soak. The kit also includes a fully serviceable Mishimoto oiled air filter, which provides a 16-percent increase in filter surface area, allowing for greater airflow and superior filtration. The Mishimoto BRZ/FR-S Performance Cold-Air Intake includes a powder-coated air diverter that mounts behind the front bumper and ensures that the radiator, AC condenser, and air intake are supplied with copious amounts of cool air. This intake provides power you can hear! It is a huge upgrade for intake noise and provides a nice throaty intake tone, especially under full throttle. For personalized styling, we offer this kit in a polished finish and powder-coated wrinkle black. As with all our products, this intake kit includes the Mishimoto Lifetime Warranty, ensuring superior product quality and craftsmanship.

• Provides 10 whp / 8 wtq gains while maintaining A/F ratios with no additional tuning
• Mandrel-bent aluminum intake piping includes CNC-machined
• MAF housing and air straightener

This Part Fits:

Add easy horsepower to your 2013-2020 BRZ/FR-S with the Mishimoto Subaru BRZ / Scion FR-S Performance Air Intake! We understand that removing the front bumper of your new BRZ/FR-S is not ideal, so our engineers designed this Performance Air Intake to develop a 7 whp / 5 wtq bolt-on power increase with no bumper removal required. In addition to the impressive power increase, our engineering team ensured that safe A/F ratios are maintained throughout the entire powerband. This intake uses a silicone induction hose and aluminum intake pipe that provides a smooth path for airflow. Additionally, the CNC-machined mass airflow (MAF) housing and air straightener ensure laminar airflow across the sensor to provide accurate readings. The kit also includes a fully serviceable Mishimoto oiled air filter, which provides a 16-percent increase in filter surface area, allowing for greater airflow and superior filtration. The Mishimoto BRZ / FR-S Performance Cold-Air Intake includes a powder-coated airbox to ensure the hot engine bay does not heat soak the air filter. The engineers at Mishimoto designed the airbox to fit properly with the Mishimoto BRZ / FR-S Oil Cooler Kit. This intake provides power you can hear! It is a huge upgrade for intake noise and provides a nice throaty intake tone, especially under full throttle. For personalized styling, we offer this kit with a black, blue, or red silicone induction hose. As with all our products, this intake kit includes the Mishimoto Lifetime Warranty.in

• Designed to fit with the Mishimoto BRZ / FR-S Oil Cooler Kit and Mishimoto Oil Fill Cap
• Provides 7 whp / 5 wtq gains while maintaining A/F ratios with no additional tuning
• No bumper removal required and installs in under 30 minutes

This Part Fits:

Add easy horsepower to your 2013-2020 BRZ/FR-S with the Mishimoto Subaru BRZ / Scion FR-S Performance Air Intake! We understand that removing the front bumper of your new BRZ/FR-S is not ideal, so our engineers designed this Performance Air Intake to develop a 7 whp / 5 wtq bolt-on power increase with no bumper removal required. In addition to the impressive power increase, our engineering team ensured that safe A/F ratios are maintained throughout the entire powerband. This intake uses a silicone induction hose and aluminum intake pipe that provides a smooth path for airflow. Additionally, the CNC-machined mass airflow (MAF) housing and air straightener ensure laminar airflow across the sensor to provide accurate readings. The kit also includes a fully serviceable Mishimoto oiled air filter, which provides a 16-percent increase in filter surface area, allowing for greater airflow and superior filtration. The Mishimoto BRZ / FR-S Performance Cold-Air Intake includes a powder-coated airbox to ensure the hot engine bay does not heat soak the air filter. The engineers at Mishimoto designed the airbox to fit properly with the Mishimoto BRZ / FR-S Oil Cooler Kit. This intake provides power you can hear! It is a huge upgrade for intake noise and provides a nice throaty intake tone, especially under full throttle. For personalized styling, we offer this kit with a black, blue, or red silicone induction hose. As with all our products, this intake kit includes the Mishimoto Lifetime Warranty.in

• Designed to fit with the Mishimoto BRZ / FR-S Oil Cooler Kit and Mishimoto Oil Fill Cap
• Provides 7 whp / 5 wtq gains while maintaining A/F ratios with no additional tuning
• No bumper removal required and installs in under 30 minutes

This Part Fits:

Add easy horsepower to your 2013-2020 BRZ/FR-S with the Mishimoto Subaru BRZ / Scion FR-S Performance Air Intake! We understand that removing the front bumper of your new BRZ/FR-S is not ideal, so our engineers designed this Performance Air Intake to develop a 7 whp / 5 wtq bolt-on power increase with no bumper removal required. In addition to the impressive power increase, our engineering team ensured that safe A/F ratios are maintained throughout the entire powerband. This intake uses a silicone induction hose and aluminum intake pipe that provides a smooth path for airflow. Additionally, the CNC-machined mass airflow (MAF) housing and air straightener ensure laminar airflow across the sensor to provide accurate readings. The kit also includes a fully serviceable Mishimoto oiled air filter, which provides a 16-percent increase in filter surface area, allowing for greater airflow and superior filtration. The Mishimoto BRZ / FR-S Performance Cold-Air Intake includes a powder-coated airbox to ensure the hot engine bay does not heat soak the air filter. The engineers at Mishimoto designed the airbox to fit properly with the Mishimoto BRZ / FR-S Oil Cooler Kit. This intake provides power you can hear! It is a huge upgrade for intake noise and provides a nice throaty intake tone, especially under full throttle. For personalized styling, we offer this kit with a black, blue, or red silicone induction hose. As with all our products, this intake kit includes the Mishimoto Lifetime Warranty.in

• Designed to fit with the Mishimoto BRZ / FR-S Oil Cooler Kit and Mishimoto Oil Fill Cap
• Provides 7 whp / 5 wtq gains while maintaining A/F ratios with no additional tuning
• No bumper removal required and installs in under 30 minutes

This Part Fits:

The Bronco is back, and with two options of powerful turbocharged engines, it was born to run free. The larger of the two EcoBoost engines, the 2.7L twin-turbo V6, cranks out 330 horsepower and 415 lb.-ft. of torque, making it capable both on and off-road. But what enthusiast doesn't want more from their vehicle? We here at Mishimoto are never ones to settle for stock, that's why we've developed this performance intake for your 2021+ Ford Bronco 2.7L EcoBoost. The Mishimoto 2021+ Ford Bronco 2.7L EcoBoost performance intake is construction from rotational molded cross-linked polyethylene. This ultra-strong material allows us to create smooth airflow while effectively keeping engine bay heat out of your intake air. This construction, combined with the 4.5-in high-flow filter and 20% increase in cross-sectional area result in an intake that is nearly 40% less restrictive than stock. To keep the intake flowing through any terrain, we've also maintained the stock fresh air inlet, which features a dust trap to protect the air filter from dust and debris. Flow is great, but power is better. Luckily, this Bronco 2.7L EcoBoost intake earns its performance designation. On the stock tune, we were able to put down an extra 7.5 horsepower and 7.4 lb-ft. of torque on the dyno. Combine this intake with our Performance Intercooler Pipes for a free-flowing charge air system. If you're ready to let your 2021+ Ford Bronco 2.7L EcoBoost breathe as free as it can run, this Mishimoto Performance intake is for you. And, like all Mishimoto products, it's backed by our Lifetime Warranty, so you can drive easy knowing we've got you covered.

• 39.6-percent Less restrictive than stock intake for greater power potential
• 20-percent larger cross-sectional area compared to stock intake tube
• Dyno-proven gains of 7.5 HP and 7.4 lb.-ft. of torque on stock tune

This Part Fits:

The Bronco is back, and with two options of powerful turbocharged engines, it was born to run free. The larger of the two EcoBoost engines, the 2.7L twin-turbo V6, cranks out 330 horsepower and 415 lb.-ft. of torque, making it capable both on and off-road. But what enthusiast doesn't want more from their vehicle? We here at Mishimoto are never ones to settle for stock, that's why we've developed this performance intake for your 2021+ Ford Bronco 2.7L EcoBoost. The Mishimoto 2021+ Ford Bronco 2.7L EcoBoost performance intake is construction from rotational molded cross-linked polyethylene. This ultra-strong material allows us to create smooth airflow while effectively keeping engine bay heat out of your intake air. This construction, combined with the 4.5-in high-flow filter and 20% increase in cross-sectional area result in an intake that is nearly 40% less restrictive than stock. To keep the intake flowing through any terrain, we've also maintained the stock fresh air inlet, which features a dust trap to protect the air filter from dust and debris. Flow is great, but power is better. Luckily, this Bronco 2.7L EcoBoost intake earns its performance designation. On the stock tune, we were able to put down an extra 7.5 horsepower and 7.4 lb-ft. of torque on the dyno. Combine this intake with our Performance Intercooler Pipes for a free-flowing charge air system. If you're ready to let your 2021+ Ford Bronco 2.7L EcoBoost breathe as free as it can run, this Mishimoto Performance intake is for you. And, like all Mishimoto products, it's backed by our Lifetime Warranty, so you can drive easy knowing we've got you covered.

• 39.6-percent Less restrictive than stock intake for greater power potential
• 20-percent larger cross-sectional area compared to stock intake tube
• Dyno-proven gains of 7.5 HP and 7.4 lb.-ft. of torque on stock tune

This Part Fits:

Give your 2018-2022 Honda Accord 2.0T the attitude it deserves with the Mishimoto Performance Air Intake. Honda might have left the V6 in history with the 10th generation Accord, but in It's place sits the de-tuned version of the Civic Type R?s powerplant. Where Honda designed the Accord to be a quiet and comfortable daily driver, some might want a little extra hiss and growl from their turbocharged Accord. Lucky for you, Mishimoto is here to deliver. The Mishimoto Performance Air Intake for your 2.0T Accord alleviates the restrictions and mufflers put in place by Honda's engineers, starting with our precision-adjusted MAF housing. CNC-machined from high-grade aluminum, our MAF housing in tandem with our silicone coupler creates a better flow for intake air while still maintaining safe air-fuel ratios. Our kit also features a Mishimoto high-flow oiled air filter incased in a robust rotational-molded airbox to keep out unwanted engine bay heat. Our airbox is topped with a sheet of carbon-fiber to give a boost to your Accord's engine bay aesthetic. Coupled together, our improvements to the 2.0T?s intake system give the Accord a much needed attitude adjustment. On top of the added aggressive engine tone, our intake improves flow by 50-percent, as well as providing max power gains of 15.6 horsepower and 12.9 torque to the wheels. The Mishimoto 2018-2022 Honda Accord 2.0T Performance Air Intake also includes the Mishimoto Lifetime Warranty for a worry-free installation.

• Provides max power gains of 15.6 whp and 12.9 wtq while maintaining safe A/F ratios
• 50-percent increase in flow over stock system
• No tune required

This Part Fits:

Give your 2018-2022 Honda Accord 1.5T the attitude and power it deserves with this Mishimoto Performance Air Intake. Honda might have left the V6 behind with the 10th generation Accord, but in its place sits a turbocharged 1.5L that's capable of cranking out 192 hp and 192 lb-ft of torque. While Honda designed the Accord to be a quiet and comfortable daily driver, some want extra growl from their turbocharged Accord. Luckily, Mishimoto is here to deliver. The Mishimoto Performance Air Intake for your 2018-2022 1.5T Accord alleviates restriction in the intake system, starting with our precision rotational-molded airbox and high-flow filter. The airbox helps insulate the filter from engine bay heat, while the enlarged fresh-air inlet increases the flow of cool outside air from between the grille and the hood. The high-flow filter is oiled to protect your precious turbocharger and engine, and washable to ensure long-term performance. Next, we CNC-machined the MAF housing from high-grade aluminum to ensure smooth flow and proper MAF sensor calibration. Our MAF housing, in tandem with our silicone coupler, allows the intake to flow better while maintaining safe air-fuel ratios. Altogether, our improvements to the 1.5T's intake system give the Accord a much-needed attitude adjustment. On top of the added aggressive engine tone, our intake reduces restriction by over 46-percent for max power gains of 7.8 horsepower and 7.2 lb-ft of torque to the wheels. The Mishimoto 2018+ Honda Accord 1.5T Performance Air Intake is a direct fit, with no other modifications or tune needed. And, like all Mishimoto Accord products, this intake includes our Mishimoto Lifetime Warranty for a lifetime of performance.

• CNC-machined MAF housing improves flow while maintaining safer air-fuel ratios
• Provides power gains of up to 7.8 horsepower and 7.2 lb-ft of torque
• Reduces intake system restriction by over 46-percent

This Part Fits:

Add some horsepower and sound to your Nissan 350Z's VQ35DE engine with the new Mishimoto Performance Air Intake. This kit is engineered specifically for your 2003--2006 Nissan 350Z and includes everything needed to replace the restrictive stock airbox. This dyno-proven air intake provides maximum gains of 10 hp and 13 tq over the stock intake while maintaining safe air/fuel ratios. This kit is simple to install, making it perfect for some extra punch on the street or autocross course. The Mishimoto Nissan 350Z Performance Air Intake includes everything needed for installation, installs in under one hour, and works perfectly with the stock tune. The stock MAF housing is retained which translates into a smooth power band with safe air / fuel ratios. To reduce air intake temperatures (IATs), a powder-coated heat shield is placed between the air filter and hot exhaust manifold, significantly reducing heat-soak. The heatshield bolts right up to the stock inlet duct on the front support to draw in the maximum amount of outside air into the filter. The heatshield also comes fully assembled with protective rubber strips to fully seal it from hot engine bay heat and prevent any vibrations during operation. The Mishimoto high-flow air filter features an integrated venturi and center inlet stack for smooth, high velocity airflow. The large filter provides 271-percent greater surface area over stock and provides proper filtration of dirt and debris. The included Mishimoto oiled air filter is completely serviceable, allowing for a lifetime of reliable use. Along with an upgrade in power, this intake also provides an aggressive and deep-sounding intake tone that is a huge improvement over the stock intake. The Mishimoto Nissan 350Z Performance Air Intake is designed in Delaware, USA and includes the Mishimoto Lifetime Warranty.

• High-flow air filter with integrated velocity stack provides sharp throttle response and improves airflow
• Dyno-proven maximum gains of up to 10 whp and 13 wtq on the stock tune
• 271-percent increase in air filter surface area

This Part Fits:

More and more vehicles are being sold with a 'sound symposer' system on their engines. This basically pumps engine noise into the cabin of the vehicle so the driver can experience the sound and rush of the engine accelerating under load. However, some customers choose not to have this sometimes obtrusive noise constantly being drawn into their car. Some people have come up with quick and easy solutions to remove this system. Mishimoto has developed a system that fits a variety of vehicles. The system features an aluminum CNC plug with a Mishimoto logo to place in the intake hose as well a rubber cap to install onto the sound diaphragm. Installation is a snap and will take about 10 minutes to complete. Now you can enjoy a quieter ride!

• Eliminates engine noise in the vehicle cabin
• Aluminum CNC plug for intake hose
• Fits the 2015+ Subaru STI

This Part Fits:

Add some additional style and efficiency to your existing Mishimoto Performance Air Intake! This powdercoated, black airbox will divert more cold outside air into your Mishimoto intake! Made from durable steel and given a light glossy powdercoat, this airbox will also add a nice touch to your engine bay. And in some cases, provide a more accurate MAF reading for more reliable datalogging and tuning! The airbox comes with all additional protective edge strips and hardware to guarantee a clean install! If used with the stock plastic intake duct, a template is provided for accurate trimming. As with all our products this airbox includes the Mishimoto Lifetime Warranty.

• Diverts cold outside air into your Mishimoto intake
• Provides more accurate MAF readings
• Powdercoated black airbox

This Part Fits:

K&N's APOLLO CIS is a universal "Cold Air Intake System". The Apollo's specially designed shape increases volumetric efficiency and is made of durable lightweight material for cooler air intake. The Apollo incorporates a K&N famous cotton gauze filter which is removable for periodic cleaning and provides the benefits of an open cone filter and standard air box in one unit. Heat buildup is reduced which keeps the intake charge cool. Smooth internal features minimize air turbulence and maximize air flow. The Apollo is ideal for normally aspired engines up to 250BHP and turbo engines up to 350BHP. It comes with a standard 70mm base flange with a range of optional stepped adapters available to allow fitment to other intake sizes.

• Backed by K&N's 10 year/Million Mile Warranty
• Back By K&Ns 10 Year/Million Mile Warranty

This is an optional foam piece which replaces the OEM foam block. For DSL model only

• Pre-cut foam insert that is ready to install
• Pre-Cut And Ready To Install

This Part Fits:

Universal adapters for smog tubes, crankcase and valve cover vents. Requires drilling hole in air filter base or valve cover. All come with mounting hardware and gasket.

• Available in straight and elbow configurations in a variety of sizes

The K&N 81-0221 In-Line Gas Filter is perfect for racing applications and can be used with a variety of oils and fuels including methanol. The 81-0221 sintered porous bronze in-line fuel filter has a flange diameter of 1/4 inch. It comes with a 1 inch body diameter by 2-1/8 inch overall length.

• 1/4 inch flange diameter
• Stainless Steel Mesh

This K&N cold air intake system is engineered for your Toyota Tacoma L4-2.4L Turbo F/L. A mandrel-bent aluminum intake tube helps increase the volume of airflow to your engine and provides a guaranteed increase of 15.28 horsepower and 25.3 torque with no tune required. This intake system is paired with a washable, reusable High-Flow LIFETIME Air Filter featuring oiled cotton filter media. The oversized, conical design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom designed open heat shield helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 60 minutes.

• PREMIUM ENGINE PROTECTION FROM A TRUSTED BRAND: K&N air intake will not void manufacturer vehicle warranty & No-Hassle Lifetime Limited Warranty protects for the life of your vehicle

This Part Fits:

Gain a guaranteed increase in horsepower and torque with K&N cold air intake system featuring madrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media.

• Will not void vehicle warranty.

This Part Fits:

Gain a guaranteed increase in horsepower and torque with a K&N cold air intake system featuring a mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical filter design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield or air box helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.

• MADE IN THE USA: Proudly made in the USA for trusted quality & reliability and backed by US based customer support.
• K&N Million Mile Limited Warranty

This Part Fits:

Gain a guaranteed increase in horsepower and torque with a K&N cold air intake system featuring a mandrel-bent aluminum intake tube. Each system is paired with a washable, reusable High-Flow Air Filter featuring oiled cotton filter media. The oversized, conical filter design allows you to go up to 100,000 miles between filter services under normal highway driving conditions. A custom heat shield or air box helps protect intake air from the high temperature of your engine bay, and the entire system can typically be installed in less than 90 minutes. Some intakes are not legal for sale or use on any pollution controlled motor vehicle in California. See the product specifications for CARB status on each part for a specific vehicle.

• K&N Million Mile Limited Warranty
• Will not void vehicle warranty.

This Part Fits: