Fits select 1985-2002 Volkswagen Cabrio, Corrado, Golf, Jetta, and Passat. This Air Lift Performance Slam Series front kit provides the aggressive static drop you want without sacrificing the ride quality needed for daily driving or the handling required for the track.

Engineered to deliver up to 127mm (5 inches) of drop, this kit utilizes durable double bellows air springs paired with high-performance air-over struts. The included camber plates feature integrated spherical bearings to maximize damper performance and steering feedback, allowing for up to -2 degrees of front camber adjustment—perfect for dialing in fitment for show stance or optimizing cornering on the track. The brackets are constructed from steel and finished in a gloss black powdercoat for long-term corrosion resistance and durability. Please note that frame modification is required for installation.

• Maximum Drop: 127mm / 5.0 inches
• Spring Type: Durable double bellows air springs
• Camber Adjustment: Integrated plates with -2 degrees of adjustment
• Strut Type: Performance air-over struts with spherical bearings
• Construction: Powdercoated gloss black steel brackets
• Hardware: Braided stainless steel leader hoses and 1/4-inch PTC fittings
• Included: Pair of front struts, all mounting hardware, and detailed instruction manual
• Manufacturer Part Number: 75583

Fits select 2008-2017 Audi A4, A5, RS5, S4, and S5 (including Quattro and Cabriolet models). This Air Lift Performance front kit provides the versatility of air suspension with the capability to drop your Audi up to 5 inches for a perfect stance without sacrificing daily drivability.

The kit features high-performance 2B6 regular double-bellows air springs paired with 30-level adjustable monotube dampers. These threaded-body shocks allow for independent ride height adjustment, meaning you can dial in your preferred fitment without altering air pressure. The monotube design ensures superior heat dissipation and consistent damping during spirited driving. Built for longevity, key components are rig-tested to 1,000,000 cycles.

• MPN: 75558
• Maximum Drop: 5 inches
• Spring Type: 2B6 double-bellows air springs
• Damping: 30-level adjustable monotube shocks
• Construction: Black chromed steel shock bodies with powder-coated lower mounts
• Hardware: Bright red anodized aluminum end caps and locking rings
• Installation: Retains factory upper shock mounts; includes all necessary hardware

Fits select 2008-2014 Subaru Impreza models, including WRX, WRX STI, 2.5i, and Sport trims.

Achieve the perfect balance of show-stopping stance and track-ready handling with the Air Lift Performance front air suspension kit. Engineered to replace your factory struts with high-performance monotube dampers and air-over shocks, this kit provides a maximum drop of 108mm (4.25") while maintaining superior ride quality. The 30-level damping adjustment allows you to fine-tune the suspension from soft daily driving to stiff track settings, while the monotube design ensures consistent damping performance by dissipating heat more efficiently than twin-tube alternatives.

This bolt-on solution requires no vehicle modifications and features integrated adjustable front camber plates equipped with spherical bearings for precise alignment and improved steering feedback. The durable double bellows springs are supported by gloss black powdercoated steel brackets and accented with red anodized aluminum components for long-lasting corrosion resistance and a professional finish.

• Manufacturer Part Number: 75556
• Maximum Drop: 108mm / 4.25"
• Damping: 30-level adjustable monotube struts
• Spring Type: Durable double bellows
• Hardware: Braided stainless steel leader hoses and 1/4" PTC fittings included
• Mounting: Adjustable front camber plates with spherical bearings
• Warranty: Air Lift 1-year limited warranty

Each kit includes a pair of front air-over shocks, all necessary mounting hardware, and a detailed instruction manual for a straightforward installation.

Fits 2001-2006 Lexus LS430 Base models.

The Air Lift Performance Front Kit (75553) delivers the perfect balance of aggressive stance and track-ready performance. Engineered specifically for the 2001-2006 Lexus LS430, this kit provides a massive 119mm (4.68-inch) maximum drop while offering superior handling compared to factory components. The high-quality monotube dampers are designed to dissipate heat more efficiently than twin-tube alternatives, providing consistent damping through corners and over bumpy surfaces.

• Precision Tuning: Features 30-level damping adjustable monotube struts, allowing you to dial in the ride quality for everything from daily driving to track use.
• Integrated Camber Plates: Equipped with spherical bearings for improved steering feedback and camber adjustment for show-winning fitment.
• Robust Construction: Built with durable double-bellows air springs, red anodized aluminum accents, and powdercoated gloss black steel brackets for maximum durability.
• Bolt-On Installation: This is a direct-fit kit requiring no vehicle modifications, ensuring a straightforward installation process.

Kit Includes: A pair of air-over shocks with 30-level damping adjustment, braided stainless steel leader hoses, 1/4-inch PTC fittings, all necessary mounting hardware, and a detailed instruction manual. Covered by Air Lift's 1-year warranty.

Fits 2003-2008 Infiniti G35 and Nissan 350Z (Select Submodels). This Air Lift Performance front kit provides the perfect balance between show-stopping stance and high-performance handling. Engineered to replace your factory front struts, this system allows for up to 5 inches of drop, giving you the versatility to transition from a slammed park height to a daily-driver clearance at the touch of a button.

Built for the track and the street, the kit features high-quality 30-level adjustable monotube dampers. These dampers dissipate heat faster than twin-tube alternatives, ensuring consistent performance during spirited driving. The 2B6 regular double-bellows air springs are paired with threaded-body shocks, allowing for independent ride height adjustment so you can fine-tune your pressure and height settings without losing suspension travel. The red anodized upper mounts utilize monoball bearings to ensure smooth articulation and precise steering response.

• Up to 5 inches of drop for maximum versatility
• 30-level adjustable monotube dampers for precise rebound and compression control
• 2B6 regular double-bellows air springs
• Threaded-body shocks with independent ride height adjustment
• Red anodized aluminum upper mounts with integrated monoball bearings
• Black chromed steel shock bodies and black anodized lower mounts
• Rig-tested to 1,000,000 cycles to ensure long-term durability
• Manufacturer Part Number: 75520

The Air Lift 1000 Universal Air Spring Kit (MPN 60917) is a versatile load-leveling solution designed to fit vehicles with open coil springs. These air helper springs provide up to 1,000 lbs. of leveling capacity, effectively eliminating rear-end squat, improving headlight aim, and reducing bottoming out while towing or hauling heavy cargo. By supporting the vehicle from inside the coil spring, they stabilize the chassis and improve overall ride comfort.

To ensure proper fitment, measure the available inside height and inside diameter of your vehicle's coil springs while at normal ride height. This kit is specifically sized for a 4.50" minimum diameter and a 10.00" maximum length.

• Up to 1,000 lbs. of load-leveling capacity (Note: Do not exceed vehicle's GVWR)
• Constructed from tough, molded polyurethane for maximum durability
• Includes two Air Lift 1000 air springs and two heat shields with clamps
• Complete kit with air lines, tee fitting, Schrader valves, and zip ties
• Universal application for open coil spring suspensions
• Manufacturer Part Number: 60917
• Limited Lifetime Warranty and 60-day money-back guarantee

Enhance your vehicle's load-carrying capability with the Air Lift Universal 1000 Air Spring Kit. Designed specifically for vehicles equipped with open coil springs, this versatile system provides up to 1,000 lbs of load-leveling support. By adding adjustable air pressure to your suspension, you can eliminate rear-end squat, correct poor headlight aim, and prevent bottoming out when hauling heavy loads or towing trailers.

The air springs are manufactured from tough, molded polyurethane for maximum durability and a long service life. This kit installs directly inside your existing coil springs, acting as a secondary spring to improve ride comfort and stability. Before ordering, verify fitment by measuring your coil spring's internal dimensions to ensure they meet the 4.00-inch minimum diameter and 8.00-inch maximum length requirements.

• Up to 1,000 lbs of load-leveling capacity (Note: Do not exceed vehicle GVWR)
• Constructed from rugged, molded polyurethane for durability
• Designed for vehicles with open coil springs
• Includes two (2) air springs, air line, tee, zip ties, two (2) Schrader valves, and installation hardware
• Heat shields and air spring spacers included where applicable
• Manufacturer Part Number: 60909
• Backed by a Limited Lifetime Warranty and a 60-day money-back guarantee

The Air Lift 1000 Universal Air Spring Kit (MPN 60907) provides up to 1,000 lbs. of load-leveling capacity for vehicles equipped with open coil springs. These air springs are engineered to eliminate rear-end squat, bottoming out, and poor headlight aim by providing adjustable support inside the factory coil springs. The result is a smoother ride and improved handling while hauling heavy loads or towing trailers.

This universal system is sized based on the physical dimensions of your vehicle's coil springs. To ensure a proper fit, measure the internal height and diameter of your springs at normal ride height. This specific kit is designed for applications requiring a 4.00" minimum diameter and a 6.00" maximum length.

• Provides up to 1,000 lbs. of load-leveling capacity (do not exceed vehicle GVWR)
• Constructed from durable, molded polyurethane for maximum longevity
• Installs inside the coil spring to assist the factory suspension
• Includes all necessary hardware, air lines, and valves for a complete installation
• Features a Limited Lifetime Warranty and 60-day money-back guarantee

Kit Includes: (2) Air Lift 1000 air springs, (2) heat shields with clamps (if applicable), air line tubing, T-fitting, zip ties, (2) Schrader valves, air spring spacers, and a fully-illustrated installation manual.

The Air Lift 1000 Universal Air Spring Kit (60902) is designed to provide up to 1,000 lbs. of load-leveling capacity for vehicles with open coil springs. These internal air springs eliminate rear-end squat, improve headlight aim, and reduce bottoming out by supporting your existing suspension during heavy hauling or towing. Crafted from durable, molded polyurethane, these air springs are engineered to withstand the rigors of the road while providing a smoother, more controlled ride.

As a universal solution, this kit is selected based on the internal dimensions of your coil springs. To ensure a correct fit for part number 60902, measure your unloaded coil spring to confirm a minimum inside diameter of 3.00 inches and an available internal height of 9.00 inches.

• Up to 1,000 lbs. of load-leveling support (do not exceed vehicle GVWR)
• Constructed from high-strength, molded polyurethane
• Fits open coil springs with 3.00" minimum diameter and 9.00" maximum length
• Includes two air springs, air lines, Schrader valves, and installation hardware
• Equipped with two heat shields and clamps where applicable
• Manufacturer Part Number: 60902
• Limited Lifetime Warranty and 60-day money-back guarantee

The Air Lift 1000 Universal Air Spring Kit (60901) provides up to 1,000 lbs. of load-leveling support to eliminate rear-end squat, improve headlight aim, and restore handling while towing or hauling. Designed to install inside existing open coil springs, these durable polyurethane air springs are a versatile solution for vehicles requiring additional suspension support and stability.

Sizing is determined by the internal dimensions of the coil spring. This kit is specifically designed for applications with a 3.00-inch minimum inside diameter and an 8.00-inch maximum inside height. Once installed, the springs can be adjusted from 5 to 35 PSI to level your vehicle under load without compromising ride quality when the vehicle is empty.

• Provides up to 1,000 lbs. of load-leveling capacity (do not exceed GVWR)
• Constructed from tough, molded polyurethane for maximum durability
• Installs inside the coil spring to reduce bottoming out and body roll
• Includes two air springs, air lines, Schrader valves, and all necessary installation hardware
• Universal fitment based on 3.00" diameter and 8.00" length requirements
• Manufacturer Part Number: 60901

Kit Includes: (2) Air Lift 1000 air springs, (2) heat shields (if applicable), air line, T-fitting, zip ties, (2) Schrader valves, air spring spacers (if applicable), and detailed installation instructions.

Fits 2021-2025 Ford F-150 Raptor.

The Air Lift 1000 Air Spring Kit is a versatile load-support solution engineered to fit inside your Raptor's existing rear coil springs. By providing up to 1,000 lbs of leveling capacity, this kit eliminates common issues associated with heavy hauling and towing, including rear-end squat, trailer sway, and bottoming out. These air springs improve steering and braking control by ensuring proper weight distribution across all four wheels.

Built for durability, the air springs are constructed from rugged materials and are adjustable from 5 to 35 PSI. This range allows you to fine-tune your suspension for specific loads or deflate them when driving empty to maintain a smooth factory ride. The system has been torture-tested to 1 million cycles on a hydraulic test rig, ensuring long-term reliability under demanding conditions.

• Up to 1,000 lbs of load-leveling capacity
• Fully adjustable air pressure from 5 to 35 PSI
• Simple installation using standard hand tools with no frame drilling required
• Reduces body roll and corrects poor headlight aim caused by squat
• Includes two air springs, air lines, Schrader valve, and all mounting hardware
• Manufacturer Part Number: 60865

The kit is backed by Air Lift’s limited lifetime warranty and a 60-day ride satisfaction guarantee.

Fits select 2016-2026 Kia Sportage, Sorento, Telluride and Hyundai Tucson, Santa Fe, and Palisade models. The Air Lift 1000 air spring kit is engineered to provide up to 1,000 lbs of load-leveling capacity, effectively eliminating rear-end sag and bottoming out when towing or hauling heavy loads. By stabilizing the vehicle, this kit restores optimal braking and steering control for a safer, more predictable driving experience.

Constructed with rugged, durable components, these air springs are designed to fit directly inside the existing rear coil springs of your vehicle. The system is fully adjustable, allowing you to fine-tune the air pressure to match your specific load requirements. Installation is straightforward and typically completed in two hours or less with no frame drilling required.

• Up to 1,000 lbs of load-leveling capacity
• Fully adjustable from 5-35 PSI to suit various load conditions
• Fits inside factory rear coil springs
• No-drill installation using included hardware
• Helps eliminate squat, trailer sway, and rough ride
• Manufacturer Part Number: 60860
• Includes Air Lift Lifetime Warranty and 60-Day Ride Satisfaction Guarantee

Fits 2022-2026 Ford Maverick AWD models, including XL, XLT, Lariat, Tremor, and Lobo.

The Air Lift 1000 series is engineered to restore your Ford Maverick's ride height and stability when towing or hauling heavy loads. These fully-adjustable air springs install directly inside the rear coil springs, providing up to 1,000 lbs of load-leveling capacity. By supporting the vehicle's rear suspension, this kit effectively eliminates common issues such as rear-end squat, poor headlight aim, trailer sway, and bottoming out during transit.

Built for durability and longevity, these air springs are torture-tested to 1 million cycles on a hydraulic test rig. The system is adjustable from 5 to 50 PSI, allowing you to fine-tune the pressure based on your specific tongue weight or payload. When driving empty, simply deflate to the minimum 5 PSI to maintain factory-like ride quality and comfort.

• Eliminates sag and improves steering and braking control while towing.
• No frame drilling required for a straightforward installation.
• Adjustable pressure range from 5 to 50 PSI for versatile load support.
• Torture-tested to 1 million cycles for maximum component longevity.
• Includes Air Lift's Lifetime Warranty and 60-Day Ride Satisfaction Guarantee.

• Manufacturer Part Number: 60859
• Load Capacity: Up to 1,000 lbs
• Pressure Range: 5-50 PSI
• Application: In-coil air spring kit

Fits select 2017-2026 Buick Envision, Chevrolet Equinox, and GMC Terrain. The Air Lift 1000 series (MPN 60856) provides up to 1,000 lbs of load-leveling capacity to eliminate rear-end sag, poor headlight aim, trailer sway, and bottoming out. These air bags are designed to fit directly inside the existing rear coil springs, providing supplemental suspension support when carrying heavy loads or towing.

Constructed from rugged, durable components, these air springs have been torture-tested to 1 million cycles on a hydraulic test rig to ensure long-term reliability. The system is fully adjustable, allowing you to maintain a level ride height and preserve optimal steering and braking control. Installation is straightforward, requiring only common hand tools and no frame drilling, with a typical install time of two hours or less.

• Adjustable air pressure from 5 to 35 PSI for custom load support
• Up to 1,000 lbs of load-leveling capacity (do not exceed manufacturer GVWR)
• Direct-fit installation inside factory coil springs
• Includes air springs, air lines, fittings, and all necessary hardware
• Tested to 1 million cycles for maximum durability
• Manufacturer Lifetime Warranty and 60-Day Ride Satisfaction Guarantee

Fits select 2020-2026 Ford Explorer and Lincoln Aviator models.

The Air Lift 1000 air spring kit is engineered to provide up to 1,000 lbs of load-leveling capacity, specifically designed to address rear-end sag, trailer sway, and poor headlight aim during towing or hauling. These fully adjustable air springs install directly inside the factory rear coil springs, providing critical supplemental support for a more stable and controlled ride.

• Adjustable Performance: Tunable from 5 to 35 PSI to accommodate varying load weights and ensure a level vehicle stance.
• Durable Construction: Built with rugged components that have been torture-tested to 1 million cycles on hydraulic rigs for maximum longevity.
• Simple Installation: Designed for a no-drill installation that typically takes 2 hours or less using standard hand tools.
• Improved Ride Quality: Helps eliminate bottoming out and body roll while restoring optimal steering and braking control.

This kit (Part Number 60855) includes two air springs, air lines, Schrader valves, all required mounting hardware, and a detailed installation manual. Air Lift covers this system with a Limited Lifetime Warranty and a 60-day ride satisfaction guarantee.

Fits select 2006-2018 Toyota RAV4 models, including Adventure, Base, EV, LE, Limited, Platinum, SE, Sport, and Hybrids.

Designed to restore proper ride height and stability, the Air Lift 1000 air spring kit provides up to 1,000 pounds of load-leveling capacity for your Toyota RAV4. These adjustable air springs install directly inside your vehicle's factory rear coil springs, acting as a secondary support system to prevent the suspension from sagging or bottoming out under heavy loads. By maintaining a level chassis, this kit improves steering response, optimizes headlight aim, and significantly reduces trailer sway and body roll during towing or hauling.

• Up to 1,000 lbs of load-leveling capacity for improved towing and hauling.
• Fully adjustable air pressure from 5 to 35 PSI to match your specific load requirements.
• Durable polyurethane construction, torture-tested to 1 million cycles for maximum longevity.
• Simple bolt-on installation takes approximately 2 hours with common hand tools; no frame drilling required.
• Includes two air springs, airline, all necessary mounting hardware, and a fully illustrated installation manual.
• Manufacturer Part Number: 60840
• Backed by Air Lift’s Lifetime Warranty and 60-Day Ride Satisfaction Guarantee.

Fits select 2017-2026 Honda CR-V (including Hybrid and e:FCEV models) and 2023 Nissan Rogue Platinum, S, SL, and SV.

Optimize your vehicle’s load-carrying capacity with the Air Lift 1000 air spring kit, part number 60834. Specifically engineered to fit inside your factory rear coil springs, these air bags provide up to 1,000 lbs of load-leveling support. By adding air when towing a trailer or hauling a full cargo load, you effectively eliminate rear-end squat, poor headlight aim, and trailer sway. When the vehicle is empty, simply deflate the springs to 5 PSI to maintain your factory ride quality.

Constructed from rugged, durable components, these air springs have been torture-tested to 1 million cycles on a hydraulic test rig to ensure longevity. Installation requires minor drilling for airline access, but no frame drilling is necessary, making it a straightforward upgrade for the DIY mechanic.

• Up to 1,000 lbs of load-leveling capacity
• Fully adjustable from 5 to 50 PSI for precise control
• Improves braking, steering, and headlight alignment under load
• Durable polyurethane construction fits inside existing coil springs
• Includes air springs, airlines, schrader valve, and all necessary hardware
• Manufacturer Part Number: 60834
• Backed by a Lifetime Warranty and 60-Day Ride Satisfaction Guarantee

Fits 2020-2025 Jeep Gladiator models, including Sport, Rubicon, Mojave, Overland, and Willys.

The Air Lift 1000 air spring kit (MPN 60830) is engineered to restore proper ride height and stability to your Jeep Gladiator when towing or hauling heavy loads. Designed to sit inside the factory rear coil springs, these durable air springs provide up to 1,000 lbs. of load-leveling capacity. By adding supplemental support, this kit eliminates common issues like rear-end squat, trailer sway, body roll, and bottoming out, ensuring your steering and braking remains responsive under load.

Constructed from rugged, durable components, these air springs are fully adjustable from 5 to 35 PSI, allowing you to fine-tune the suspension for any situation—simply add air when loaded and deflate when riding empty for a factory-smooth ride. The installation is straightforward and typically takes under two hours with common hand tools, requiring no frame drilling or permanent modifications.

• Up to 1,000 lbs. of load-leveling capacity (Do not exceed vehicle GVWR)
• Adjustable pressure range: 5 to 35 PSI
• Installs inside rear coil springs for clean integration
• Torture-tested to 1 million cycles for long-term durability
• No-drill installation using standard hand tools
• Includes air springs, air lines, and all necessary mounting hardware
• Manufacturer Part Number: 60830

Fits 2018-2026 Jeep Wrangler (JL) 2WD and 4WD models including Rubicon, Sahara, Sport, and 4xe hybrids. This Air Lift 1000 air spring kit (MPN 60829) provides up to 1,000 lbs of load-leveling capacity to eliminate rear-end sag and bottoming out when towing or hauling heavy gear.

Designed to install directly inside your vehicle's rear coil springs, these rugged polyurethane air cylinders provide additional support without requiring frame drilling. By adjusting the air pressure, you can maintain a level vehicle height for improved steering control, braking effectiveness, and stable handling while under load.

• Adjustable air pressure from 5 to 35 PSI for precise load support
• Up to 1,000 lbs of leveling capacity (do not exceed vehicle GVWR)
• Specifically engineered to fit within coil-sprung suspension systems
• No-drill installation for a straightforward bolt-on upgrade
• Eliminates sag and prevents bottoming out on rough terrain
• Includes air springs, air lines, schrader valve, and all necessary hardware
• Manufacturer Part Number: 60829
• Backed by Air Lift’s Limited Lifetime Warranty and 60-Day Ride Satisfaction Guarantee

Fits select 2019-2026 Ram 1500 models, including Big Horn, Laramie, Limited, Rebel, Tradesman, and TRX.

The Air Lift 1000HD is a heavy-duty air suspension solution engineered specifically for the coil-sprung rear of the fifth-generation Ram 1500. This system features custom-molded polyurethane air springs that insert directly into your factory rear coil springs to provide up to 2,100 lbs. of load-leveling capacity. By adding adjustable support, it effectively eliminates common towing and hauling issues like rear-end squat, trailer sway, poor headlight aim, and bottoming out.

• Up to 2,100 lbs. of load-leveling capability for heavy hauling.
• Constructed from tough, custom-molded polyurethane for long-term durability.
• Easy installation requires only common hand tools with no frame drilling required.
• Works with existing factory suspension to improve braking and steering response while loaded.
• Includes clear installation manual and all necessary hardware.
• Manufacturer Part Number: 60828HD
• Backed by a 60-day money-back guarantee and limited lifetime warranty.

Fits 2011-2022 Toyota Sequoia (Limited, Nightshade, Platinum, SR5, TRD Pro, and TRD Sport).

Engineered to restore ride height and stability when towing or hauling, the Air Lift 1000 air spring kit provides up to 1,000 lbs. of load-leveling capacity. These adjustable air helper springs install directly inside your Sequoia's rear coil springs, providing critical support to prevent rear-end sag, vehicle sway, and bottoming out. By distributing weight across all four tires, the system improves braking, steering response, and headlight aim for a safer driving experience.

Constructed from rugged, molded polyurethane, these air springs are fully adjustable via easy-to-use air fittings. Simply increase pressure when loaded and reduce it for a comfortable, factory-like ride when empty. Note: This kit is designed for models with coil spring suspensions and does not fit Platinum trims equipped with factory air suspension.

• Manufacturer Part Number: 60826
• Leveling Capacity: Up to 1,000 lbs.
• Material: Tough molded polyurethane
• Pressure Range: Adjustable up to 35 PSI (typical max for SUVs)
• Installation: Fits inside existing rear coil springs with included hardware
• Warranty: Limited Lifetime Warranty and 60-day ride satisfaction guarantee

Fits select 2011-2026 Dodge Durango models.

The Air Lift 1000 Series air spring kit (60824) provides up to 1,000 lbs of load-leveling capacity to keep your Dodge Durango level and stable. These helper springs install directly inside your factory rear coil springs to eliminate sag, reduce trailer sway, and prevent bottoming out while towing or hauling. With fully adjustable air pressure, you can tune the suspension for a firm ride under load or maintain a comfortable, factory-like ride when empty.

Constructed from high-strength molded polyurethane, these air springs are designed for durability and long-term reliability. The kit includes everything needed for installation, featuring quick-connecting air fittings that make the process straightforward using common mechanic's tools. This system is an ideal solution for Durango owners who frequently tow trailers or carry heavy payloads and need to maintain proper ride height and handling.

• Leveling Capacity: Up to 1,000 lbs (Do not exceed vehicle GVWR)
• Construction: Tough, molded polyurethane for maximum durability
• Installation: Mounts inside existing rear coil springs; includes illustrated manual
• Adjustment: Fully adjustable air pressure (typically up to 35 PSI for SUVs)
• Fitment Note: Per manufacturer, does not fit Durango Heat or R/T models except for 2023-2024 versions.
• Manufacturer Part Number: 60824
• Included: Two air springs, air lines, Schrader valve, mounting hardware, and instructions
• Warranty: Limited Lifetime Warranty and 60-day ride satisfaction guarantee

Fits select 2009-2010 Dodge Ram 1500 and 2011-2024 Ram 1500 / 1500 Classic models.

The Air Lift 1000HD Rear Air Spring Kit (MPN: 60818HD) is a heavy-duty suspension solution engineered specifically for coil-sprung RAM 1500 pickups. These custom-molded polyurethane air springs insert directly into your factory rear coil springs to provide up to 2,100 lbs. of load-leveling capacity. By supporting the vehicle's existing suspension, this kit effectively eliminates rear-end squat, trailer sway, body roll, and bottoming out while restoring proper headlight aim and steering response during towing or hauling.

Constructed from durable molded polyurethane, these air springs are designed to withstand the rigors of heavy-duty use. Installation is straightforward and requires no frame drilling or permanent vehicle modifications, utilizing common hand tools for a seamless fit. This kit allows you to maintain a level, stable ride height while ensuring safety and comfort under load.

• Up to 2,100 lbs. of load-leveling capacity (do not exceed vehicle GVWR)
• Constructed from tough, custom-molded polyurethane for maximum durability
• Direct-fit installation inside existing rear coil springs with no drilling required
• Eliminates squat, sway, and bottoming out for improved braking and handling
• Does not fit vehicles equipped with factory air suspension
• Includes all necessary hardware and fully-illustrated installation manual
• Manufacturer Part Number: 60818HD
• Backed by Air Lift’s Limited Lifetime Warranty and 60-Day Ride Satisfaction Guarantee

Fits 2009-2010 Dodge Ram 1500 and 2011-2024 Ram 1500 and 1500 Classic. The Air Lift 1000 Series air spring kit (MPN: 60818) provides up to 1,000 lbs. of load-leveling capacity to eliminate rear-end sag, sway, and bottoming out during towing or hauling. These adjustable air helper springs fit directly inside your existing rear coil springs to provide additional support without requiring a complete suspension overhaul.

Constructed from tough, molded polyurethane, these air springs are designed for long-term durability and reliable service under heavy loads. The system is fully adjustable; simply add air when hauling heavy trailers or equipment to maintain a level ride height, and reduce pressure when unloaded to restore factory ride quality. This kit installs with common mechanic's tools and includes all necessary hardware and air lines.

• Up to 1,000 lbs. of load-leveling capacity (do not exceed vehicle GVWR)
• Constructed from high-strength molded polyurethane
• Fully adjustable air pressure for custom load support
• Includes air springs, air lines, and all required installation hardware
• Replaces or supports rear springs to improve handling and traction
• Limited Lifetime Warranty and 60-day ride satisfaction guarantee
• Note: Will not fit vehicles equipped with factory air suspension

Fits select 2007-2018 Jeep Wrangler and Wrangler JK (Rubicon, Sahara, Sport, Unlimited, X, and Special Editions).

The Air Lift 1000 Air Spring Kit provides up to 1,000 lbs. of load-leveling capacity to support your rear suspension when towing or hauling. These adjustable air helper springs fit inside your factory rear coil springs, working to eliminate the sag, sway, and bottoming out often experienced under heavy loads. By restoring proper ride height, they improve steering, braking, and overall vehicle handling.

Constructed from tough, molded polyurethane, these air springs are built for durability and long-term service. The kit is fully adjustable, allowing you to add air pressure when loaded and reduce it when empty for a comfortable ride regardless of cargo. Installation is straightforward, utilizing common mechanic's tools with no major modifications required.

• Manufacturer Part Number: 60817
• Load-leveling capacity: Up to 1,000 lbs. (Do not exceed vehicle GVWR)
• Material: Tough molded polyurethane
• Installation: Fits inside existing rear coil springs
• Adjustability: Air adjustable with quick-connecting fittings
• Included: Air springs, air lines, and all necessary mounting hardware
• Warranty: Limited Lifetime Warranty

Fits select 2005-2018 Acura MDX, Honda Odyssey, and Honda Pilot.

The Air Lift 1000 Air Spring Kit (MPN: 60815) provides up to 1,000 lbs. of load-leveling capacity to eliminate rear-end sag, body sway, and bottoming out. These adjustable air helper springs install directly inside your vehicle's existing rear coil springs, providing essential support when towing trailers or hauling heavy cargo. By maintaining a level ride height, this kit ensures better braking, more stable steering, and improved headlight aim.

Constructed from tough, molded polyurethane, these air springs are designed for durability and a precise fit. The system is fully adjustable; simply add air to the springs via the included air lines when loaded and exhaust the air for a comfortable factory ride when the vehicle is empty. This kit includes all necessary air springs, fittings, air lines, and hardware for a straightforward installation with standard mechanic's tools.

• Up to 1,000 lbs. of load-leveling capacity
• Manufactured from durable molded polyurethane
• Installs inside existing coil springs to support the suspension
• Fully adjustable air pressure for varying load conditions
• Reduces bottoming out and improves handling while towing
• Manufacturer Part Number: 60815

Fits select 2008-2016 Chrysler Town & Country, Dodge Grand Caravan, and Volkswagen Routan.

Restore proper ride height and stability with the Air Lift 1000 Air Spring Kit (60814). Designed to install directly inside your vehicle's factory rear coil springs, these adjustable air helper springs provide up to 1,000 lbs of load-leveling capacity. By supporting the vehicle from within the spring, they effectively eliminate rear-end sag, trailer sway, and bottoming out when towing or hauling heavy cargo.

Constructed from tough, molded polyurethane, these air springs are built to withstand harsh road conditions while maintaining flexibility. The system is fully adjustable; simply add air to support a heavy load and release pressure for a comfortable, factory-style ride when unloaded. This kit includes all necessary hardware and air lines for a straightforward installation using common hand tools.

• Up to 1,000 lbs of load-leveling capacity
• Manufactured from durable molded polyurethane
• Adjustable air pressure for custom support
• Reduces bottoming out and improves steering control
• Includes air springs, air lines, and all required hardware
• Manufacturer Part Number: 60814

Fits select 1984-2007 Toyota 4Runner, Sequoia, and Van. This Air Lift 1000 air helper spring kit provides up to 1,000 lbs. of load-leveling capacity to improve your vehicle's stability and ride quality when towing or hauling. Designed to install inside your existing rear coil springs, these polyurethane air springs eliminate common issues like rear-end sag, vehicle sway, and bottoming out under heavy loads.

Constructed from tough, molded polyurethane, these air springs are fully adjustable via air pressure. You can add air when loaded for maximum support and deflate them when empty for a comfortable factory ride. The kit includes all necessary air lines, fittings, and hardware for a straightforward installation using standard mechanic's tools.

• Up to 1,000 lbs. of load-leveling capacity
• Manufactured from durable molded polyurethane
• Fully adjustable air pressure for varying load conditions (typical max 35 PSI for SUVs)
• Installs inside existing coil springs to provide additional support
• Reduces bottoming out and improves headlight aim by leveling the chassis
• Manufacturer Part Number: 60812
• Includes Limited Lifetime Warranty and 60-day ride satisfaction guarantee

Fits select 1997-2010 Jeep Wrangler, Grand Cherokee, and Commander models. This Air Lift 1000 air spring kit provides up to 1,000 lbs. of load-leveling capacity to support your vehicle when towing or hauling heavy loads.

Constructed from tough, molded polyurethane, these adjustable air helper springs are designed to be installed inside your vehicle's existing rear coil springs. By adding air pressure when loaded and reducing it when empty, you can maintain a level ride height, eliminate rear-end sag, and reduce bottoming out. This system improves overall handling and safety by ensuring even weight distribution across all four tires.

• Up to 1,000 lbs. of load-leveling capacity (do not exceed vehicle GVWR)
• Manufactured from durable, molded polyurethane for long-term reliability
• Installs inside existing coil springs with common mechanic's tools
• Fully adjustable air pressure to match your specific load requirements
• Maximum pressure: 35 PSI (Cars/SUVs); 90 PSI (Motorhomes)
• Includes air springs, air lines, and all necessary installation hardware
• Manufacturer Part Number: 60811

Fits select 2003-2014 Toyota 4Runner and FJ Cruiser models.

The Air Lift 1000 Air Spring Kit (Part Number 60809) provides up to 1,000 lbs of load-leveling capacity to eliminate rear-end sag, trailer sway, and bottoming out. These adjustable air helper springs install directly inside your vehicle's factory rear coil springs, providing essential support when towing or hauling heavy cargo. By maintaining a level ride height, the system improves steering control, braking effectiveness, and overall vehicle stability.

Constructed from tough, molded polyurethane, these air springs are engineered for durability and reliable performance under load. The system is fully adjustable, allowing you to increase pressure for heavy towing or decrease it for a comfortable ride when the vehicle is unloaded. This kit includes the air springs, air lines, and all necessary mounting hardware for a straightforward installation with common hand tools.

• Up to 1,000 lbs of load-leveling capacity (Do not exceed vehicle GVWR)
• Constructed from durable, high-strength molded polyurethane
• Fully adjustable air pressure (Typical max: 35 PSI for SUVs)
• Installs inside existing coil springs to prevent sag and bottoming out
• Includes all necessary air lines and installation hardware
• Manufacturer Part Number: 60809
• Backed by a Limited Lifetime Warranty and 60-day ride satisfaction guarantee