Fits 2019-2025 Ram 3500 2WD and 4WD models.

The Air Lift LoadLifter 5000 Ultimate kit (MPN 88231) provides up to 5,000 lbs of load-leveling capacity to eliminate vehicle squat, trailer sway, and bottoming out. This system is designed specifically for heavy-duty hauling, ensuring optimal braking and steering control even under maximum load. Unlike standard air springs, the Ultimate series features a built-in internal jounce bumper that replaces the factory bumper, allowing you to run the springs at zero air pressure safely while absorbing road shock and preventing harsh jarring.

Constructed for long-term durability, the air springs and hardware are torture-tested to 1 million cycles. The fully adjustable pressure range of 5 to 100 PSI allows you to fine-tune your suspension for any load, from empty beds to heavy fifth-wheel trailers.

• Up to 5,000 lbs of load-leveling capacity
• Internal jounce bumper prevents bottoming out and allows for maintenance-free operation
• Adjustable air pressure from 5 to 100 PSI
• Torture-tested to 1 million cycles for maximum longevity
• Includes all necessary mounting hardware and air lines
• Manufacturer Part Number: 88231

Fits select 1965-2002 Chevrolet, GMC, Dodge, and Ford trucks, including C10-C3500, D/W Series, Ram 1500-3500, and F-100 through F-350 models.

The Air Lift LoadLifter 5000 Ultimate air spring kit (MPN 88215) provides up to 5,000 lbs. of load-leveling capacity, engineered to eliminate rear-end sag and improve vehicle stability while towing or hauling. This Ultimate series kit features an exclusive internal closed-cell urethane foam jounce bumper inside the air spring. This internal bumper absorbs road shock, eliminates harsh jarring on rough terrain, and allows the springs to be safely operated with zero air pressure for maintenance-free reliability.

• Load Support: Up to 5,000 lbs. of load-leveling capacity (do not exceed GVWR).
• Internal Jounce Bumper: Provides a secondary cushion that prevents bottoming out and enables zero-PSI operation.
• Adjustable Support: Fully tunable from 5 to 100 PSI to match your specific load requirements.
• Heavy-Duty Build: Air springs are constructed with 2-ply reinforced fabric and include upper and lower roll plates to protect against sharp edges.
• Simple Installation: Bolt-on design requires no drilling into the vehicle frame and replaces the factory jounce bumpers.

The kit includes two air springs with internal bumpers, mounting brackets, air lines, Schrader valves, roll plates, and all necessary installation hardware. Please note: This kit requires a minimum of 8 inches of clearance between the tire and frame and is not compatible with side-mount fifth-wheel hitches.

Fits select 2015-2026 Ford Transit-150, Transit-250, Transit-350, and Transit-350 HD models (Note: Does not fit E-Transit 350).

The Air Lift LoadLifter 5000 Ultimate (MPN 88213) is engineered to provide up to 5,000 lbs. of load-leveling capacity, ensuring your Ford Transit remains stable and level while hauling heavy cargo or towing. Unlike standard air springs, the Ultimate series features an exclusive internal jounce bumper made of closed-cell urethane foam. This integrated bumper allows the air springs to safely run at zero air pressure if needed, provides a cushion that absorbs road shock, and prevents harsh jarring or bottoming out on rough terrain.

Built for long-term durability, these air springs are constructed with 2-ply reinforced fabric and include upper and lower roll plates to protect the bellows from sharp edges and the vehicle frame. This underframe kit is designed for a direct bolt-on installation with no frame drilling required and is compatible with most in-bed hitches.

• Load Leveling: Up to 5,000 lbs. capacity (do not exceed vehicle GVWR)
• Pressure Range: Fully adjustable from 5 to 100 PSI for custom ride control
• Internal Jounce Bumper: Maintenance-free urethane foam absorbs shock and protects the vehicle when loaded
• Installation: Bolt-on application with no drilling into the frame required
• Bellows Construction: Durable 2-ply reinforced fabric for maximum strength and longevity
• Complete Kit: Includes two air springs, heavy-duty mounting brackets, air lines, Schrader valve, and all necessary hardware

Fits select 2005-2010 Ford F-250 and F-350 Super Duty models (XL, XLT, Lariat, King Ranch, Harley-Davidson, Cabela's, and FX4).

The Air Lift LoadLifter 5000 Ultimate is engineered to eliminate rear-end sag, bottoming out, and headlight aim issues when towing or hauling heavy loads. This system provides up to 5,000 lbs. of load-leveling capacity, working alongside your factory leaf springs to improve stability and ride quality. The "Ultimate" series distinguishes itself with an exclusive internal jounce bumper made of closed-cell urethane foam. This allows the air springs to be maintenance-free, enabling you to safely run at zero air pressure if needed while providing a cushion that absorbs road shock and prevents harsh jarring.

Built for durability, the air springs feature 2-ply fabric reinforcement and include upper and lower roll plates to protect the bellows from sharp edges. This kit is compatible with most in-bed hitches, including Reese 5th wheel hitches (excluding Reese Signature Series and custom rail kit installations).

• Manufacturer Part Number: 88212
• Load Leveling Capacity: Up to 5,000 lbs.
• Pressure Range: Fully adjustable from 5 to 100 PSI
• Internal Jounce Bumper: Closed-cell urethane foam for shock absorption
• Construction: 2-ply reinforced fabric air springs with protective roll plates
• Fitment Note: Fits vehicles with in-bed hitches (see exclusions)
• Kit Includes: 2 air springs, mounting brackets, air lines, Schrader valve, and all necessary Grade 8 installation hardware

Fits select 1996-2025 Chevrolet Express 2500/3500, GMC Savana 2500/3500, and 1996 GM G30/G3500 vans. Note: 2500 models must have over 7,300 GVWR and a boxed frame.

The Air Lift LoadLifter 5000 Ultimate (MPN 88205) provides up to 5,000 lbs. of load-leveling capacity to eliminate rear-end sag, bottoming out, and headlight aim issues during heavy towing or hauling. As part of the Ultimate series, this kit features an exclusive internal jounce bumper made from closed-cell urethane foam. This integrated bumper allows the air springs to safely run with zero air pressure and provides a secondary cushion to absorb harsh shocks on rough terrain, ensuring a smoother ride even when the vehicle is unloaded.

Built for durability in demanding environments, these air springs are constructed like a tire with 2-ply reinforced fabric and include upper and lower roll plates to protect the bellows from sharp edges. The system is fully adjustable from 5 to 100 PSI, allowing you to fine-tune the suspension to your specific load requirements.

• Up to 5,000 lbs. of load-leveling capacity
• Maintenance-free internal jounce bumper prevents bottoming out
• Adjustable air pressure from 5 to 100 PSI
• Durable 2-ply reinforced bellows with protective roll plates
• Replaces factory jounce bumpers for a complete suspension upgrade
• Kit includes: 2 air springs, mounting brackets, air lines, Schrader valve, and all installation hardware
• Manufacturer Part Number: 88205

Fits select 2007-2018 Chevrolet Silverado 1500 and GMC Sierra 1500 models with 68.4-inch or 78-inch bed lengths. Engineered for heavy-duty towing and hauling, the Air Lift LoadLifter 5000 Ultimate kit provides up to 5,000 lbs. of load-leveling capacity while maintaining factory ride quality.

This system features an industry-exclusive internal jounce bumper made from closed-cell urethane foam. This design allows the springs to run safely at zero air pressure, eliminates harsh jarring on rough roads, and prevents the vehicle from bottoming out even under heavy loads. The air springs are fully adjustable from 5 to 100 PSI, allowing you to fine-tune the suspension to keep your truck level and stable whether it is loaded or empty.

• Internal jounce bumper absorbs shock and allows for maintenance-free operation at 0 PSI
• Fits vehicles equipped with in-bed hitches
• Replaces factory jounce bumpers to improve ride comfort and stability
• High-strength construction for reliable heavy-duty performance
• Includes all necessary mounting hardware and instructions
• Manufacturer Part Number: 88204

Fits select 2004-2014 Ford F-150 models including XL, XLT, STX, FX4, Lariat, King Ranch, Platinum, and SVT Raptor.

The Air Lift LoadLifter 5000 Ultimate rear air spring kit (MPN: 88200) provides up to 5,000 lbs of load-leveling capacity to eliminate vehicle squat, trailer sway, and bottoming out. Designed for heavy-duty towing and hauling, these air springs feature an industry-exclusive internal jounce bumper. This closed-cell urethane foam insert allows you to run the springs safely at 0 PSI and absorbs road shock to prevent harsh jarring, even when the vehicle is unloaded.

Constructed for professional-grade longevity, the kit includes heavy-duty air springs and rugged mounting hardware, all torture-tested to 1 million cycles on a hydraulic test rig. The system is fully adjustable between 5 and 100 PSI, allowing you to fine-tune your rear suspension for any load while maintaining optimal braking and steering control. This kit replaces the factory jounce bumpers for a completely integrated load-support solution.

• Up to 5,000 lbs of load-leveling capacity
• Exclusive internal jounce bumper allows for maintenance-free operation at 0 PSI
• Eliminates squat, poor headlight aim, and trailer sway
• Fully adjustable air pressure from 5 to 100 PSI
• Torture-tested to 1 million cycles for proven durability
• Replaces factory jounce bumpers for better ride quality
• Includes all necessary mounting hardware and installation components

Fits select 1975-2026 Ford E-150, E-250, and E-350 (including Econoline, Club Wagon, and Super Duty variants). This LoadLifter 5000 Ultimate kit is engineered to provide up to 5,000 lbs. of load-leveling capacity, ensuring your vehicle remains stable and level while towing or hauling heavy payloads.

What sets the Ultimate series apart is the Air Lift-exclusive internal jounce bumper. Constructed from closed-cell urethane foam, this internal cushion absorbs road shock and prevents harsh jarring on rough surfaces. Because the jounce bumper provides secondary support, these air springs are maintenance-free and can be safely operated with zero air pressure. The air springs themselves are built like a tire, featuring 2-ply reinforced fabric for maximum durability and strength.

Installation is designed to be straightforward with no drilling into the frame required. The kit includes specialized upper and lower roll plates to protect the air springs from sharp edges and brackets, extending the life of the system.

• Up to 5,000 lbs. of load-leveling capacity (do not exceed GVWR)
• Internal urethane jounce bumper absorbs shock and allows for 0 PSI operation
• Fully adjustable from 5 to 100 PSI for customized ride control
• 2-ply fabric reinforced air springs for long-term durability
• No-drill installation mounts to factory points
• Includes 2 air springs, roll plates, brackets, air lines, Schrader valve, and all mounting hardware
• Manufacturer Part Number: 88138

Fits select 1970-2003 Chevrolet G20/G30, GMC G25/G35, and Dodge B100-B3500/Ram Van models.

The Air Lift LoadLifter 5000 Ultimate is designed for heavy-duty hauling and towing, providing up to 5,000 lbs of load-leveling capacity. This kit distinguishes itself from standard air springs with a built-in internal jounce bumper. This closed-cell urethane foam bumper absorbs shock and allows the vehicle to be operated safely with zero air pressure in the springs, effectively replacing the factory bump stops while preventing bottoming out on rough roads.

Constructed with 2-ply reinforced fabric, these air springs are built like a tire for maximum durability. The kit includes upper and lower roll plates that protect the air bags from sharp edges and increase load capacity. Fully adjustable from 5 to 100 PSI, this system allows you to level your ride whether loaded or unloaded, improving stability and reducing trailer sway.

• Up to 5,000 lbs load-leveling capacity (do not exceed vehicle GVWR)
• Internal jounce bumper allows for maintenance-free operation at 0 PSI
• Adjustable air pressure from 5 to 100 PSI
• Heavy-duty 2-ply reinforced air springs for long-term durability
• Includes 2 air springs, roll plates, air lines, Schrader valve, and all installation hardware
• Manufacturer Part Number: 88105

Fits select 1968-1996 Chevrolet and GMC C/K series pickups, Suburbans, Blazers, Jimmys, and G-series vans.

The Air Lift 1000 Air Spring Kit is a versatile load-support solution designed to improve ride quality and safety when towing or hauling. These adjustable air helper springs install directly inside your vehicle's factory coil springs to provide up to 1,000 lbs of load-leveling capacity. By supporting the vehicle's weight at the suspension, this kit effectively eliminates rear-end sag, reduces sway, and prevents bottoming out under heavy loads.

Constructed from rugged, durable molded materials, these air springs are fully adjustable via air pressure. Simply add air when hauling and decrease pressure for a comfortable factory-like ride when unloaded. This kit is ideal for supporting heavy cargo, leveling trailers, or providing additional front-end support for accessories like snowplows on 2WD applications.

• Provides up to 1,000 lbs. of load-leveling capacity (do not exceed manufacturer GVWR)
• Fully adjustable air pressure: typically 5-35 PSI for trucks/vans and up to 90 PSI for motorhome applications
• Reduces squat and improves braking and steering control while loaded
• Easy installation inside existing coil springs using common hand tools
• Includes air springs, air lines, easy-to-use air fittings, and all necessary mounting hardware
• Manufacturer Part Number: 81560
• Limited Lifetime Warranty and 60-day ride satisfaction guarantee

Fits select 1984-2006 Jeep Cherokee, Comanche, Grand Cherokee, Grand Wagoneer, Wagoneer, and Wrangler.

The Air Lift 1000 Air Spring Kit (MPN 80702) provides up to 1,000 lbs. of load-leveling capacity, specifically engineered to support your Jeep's suspension when towing trailers or hauling heavy cargo. By installing directly inside the factory coil springs, these air helpers effectively eliminate rear-end sag, reduce trailer sway, and prevent bottoming out on rough terrain. The air pressure is fully adjustable, allowing you to maintain a firm, stable ride when loaded and a soft, comfortable ride when empty.

• Load Capacity: Up to 1,000 lbs. of leveling support (do not exceed vehicle GVWR)
• Materials: Built from tough, molded polyurethane for maximum durability and puncture resistance
• Adjustability: Quick-connect air fittings for precision tuning of air pressure
• Installation: Mounts inside existing coil springs with common hand tools; includes fully illustrated manual
• Included Components: Air springs, air lines, Schrader valve, and all required mounting hardware
• MPN: 80702

Fits select 2014-2025 Ram 2500 and 3500 trucks.

The Air Lift 1000 Air Spring Kit (MPN 80532) provides up to 1,000 lbs of load-leveling capacity to eliminate rear-end sag, vehicle sway, and bottoming out. Engineered to install inside your vehicle's existing rear coil springs, these fully adjustable air springs allow you to tune your suspension for heavy towing or hauling and return to a soft ride when unloaded. This system provides much-needed support for heavy cargo, ensuring the vehicle remains level and the tires maintain a proper contact patch with the road.

Constructed from tough molded polyurethane, this kit is built for durability and reliable service under heavy-duty conditions. The air-adjustable design utilizes quick-connecting fittings for easy pressure management, ensuring your Ram 2500 or 3500 remains level and stable regardless of the load. This kit is a direct solution for improving ride quality and handling for heavy-duty Ram applications.

• Provides up to 1,000 lbs of load-leveling support (do not exceed vehicle GVWR)
• Constructed from tough molded polyurethane for long-term durability
• Fully adjustable air pressure for custom ride control
• Installs inside the factory coil springs with common hand tools
• Includes air springs, air lines, and all necessary installation hardware
• Manufacturer Part Number: 80532
• Limited Lifetime Warranty and 60-day ride satisfaction guarantee included

Fits select 2017-2025 Tesla Model 3 and Model Y (Base, Long Range, Performance, Standard Range, and Standard Plus).

The Air Lift Performance 78701 Rear Kit provides the ability to drop your Tesla up to 145mm (5.7 inches) from stock height while significantly improving handling dynamics. This kit replaces the heavy factory coil springs with lightweight double-bellow air springs and performance-tuned monotube dampers, reducing unsprung mass for more responsive suspension travel. Each monotube damper features 30 levels of damping adjustment, allowing you to transition from a soft street ride to a firm performance setting with a simple click.

Designed for durability and precision, the threaded-body dampers include adjustable lower perches, which allow you to change ride height independently of air pressure. All major components are rig-tested to over one million cycles, and dampers are dyno-matched in pairs to ensure consistent performance across the axle. This kit is designed to maintain the use of your factory rear stabilizer bar for predictable cornering.

• Maximum drop: 145mm (5.7 in) from factory height
• 30 levels of damping adjustment for precise tuning
• High-quality monotube dampers for superior heat dissipation
• Threaded-body dampers with adjustable lower perches
• Progressive rate air springs for improved handling balance
• Tested for over 1 million cycles to ensure long-term reliability
• Dyno-tested and matched damper pairs
• Maintains factory rear stabilizer bar compatibility
• Manufacturer Part Number: 78701

Fits select 2016-2023 Chevrolet Camaro (LS, LT, LT1, SS, ZL1) and 2023 Honda Accord (EX, Hybrid, LX) models.

Achieve the perfect stance without compromising vehicle performance with the Air Lift Performance Rear Air Suspension Kit. This system is engineered to provide a maximum drop of 142mm (5.6 inches) from factory ride height, allowing you to "air out" for a show-ready look while maintaining the sharp, responsive handling expected of a modern performance chassis. Unlike fixed coilovers, this kit offers the versatility to adjust ride height at the touch of a button, eliminating common lowered-car issues like steep driveways or speed bumps.

The rear kit features robust double-bellow air springs paired with threaded-body dampers. With 30 levels of damping adjustability, you can fine-tune the suspension from a comfortable street setting to a firm, track-ready response. To ensure long-term reliability, key components have been torture-tested to 1 million cycles on an in-house hydraulic rig at temperatures ranging from -30°F to 150°F.

• Maximum Drop: 142mm (5.6in) from stock ride height
• Damping: 30-level adjustable threaded-body dampers
• Air Springs: High-quality double-bellow design
• Testing: Rigorously tested to 1 million cycles for durability
• Hardware: Includes all necessary installation components
• Manufacturer Part Number: 78665
• Warranty: One-year, unlimited-mileage manufacturer warranty

Fits select 2015-2024 Audi A3, S3, RS3, and TT, along with Volkswagen Golf, GTI, Golf R, Jetta, Tiguan, and Arteon models with independent rear suspension (IRS).

The Air Lift Performance Rear Kit is engineered to provide the aggressive stance of a slammed vehicle without the performance compromises found in traditional lowering springs or coilovers. Built for the MKVII/MQB platform, this kit utilizes double-bellow air springs and threaded-body dampers to achieve a maximum drop of 137mm from stock height. The monotube damper design ensures superior heat dissipation compared to twin-tube alternatives, providing consistent damping profiles during spirited driving.

Total customization is at your fingertips with 30 levels of damping adjustment, ranging from a soft street ride to race-ready stiffness. Because the lower perches are adjustable, you can dial in your preferred ride height independently of air pressure. To ensure long-term reliability in harsh environments, these components have been rig-tested for 1 million cycles at temperatures ranging from -30°F to 150°F.

• Up to 137mm (5.4") drop for maximum stance
• 30-level adjustable monotube dampers for precision tuning
• Double-bellow air springs for improved handling and load capacity
• Threaded lower perches allow ride height adjustment independent of pressure
• Reduces unsprung mass compared to heavy OEM coil suspensions
• All dampers are dyno-tested and matched in pairs
• Includes all necessary installation hardware and instructions
• Manufacturer Part Number: 78664

Fits select 2015-2024 Audi A3, RS3, S3, TT and Volkswagen Golf, GTI, Golf R, Arteon, and Golf SportWagen.

The Air Lift Performance Slam Series rear kit is engineered to provide the aggressive, slammed stance enthusiasts demand without compromising the ride quality required for a daily driver. This kit replaces factory rear coil springs with high-performance double-bellow air springs and twin-tube struts, capable of dropping your vehicle up to 137mm from stock height. By reducing unsprung mass compared to OEM suspension, this system improves handling response and allows for maximized wheel travel.

To ensure long-term reliability in harsh conditions, Air Lift Performance rig-tests these key suspension components to 1 million cycles on an in-house hydraulic test rig. The system is designed to operate consistently in temperatures ranging from -30°F to 150°F, providing peace of mind whether you are on the track or the street.

• Achieves up to 137mm drop from stock ride height
• Double-bellow air springs for progressive-rate performance and balance
• Twin-tube struts designed for efficient heat dissipation
• Fixed damping specifically tuned for the vehicle platform
• Rig-tested to 1,000,000 cycles for maximum durability
• Patented upper mounts designed to reduce noise and vibration
• Manufacturer Part Number: 78662
• Includes one-year, unlimited-mileage warranty

Fits select 2014-2024 Infiniti Q50, Q60, and Q70 models. The Air Lift Performance Front Kit (MPN 78566) is engineered to transform the handling and stance of your luxury sedan or coupe, providing a maximum drop of 85mm from factory ride height for a low, aggressive profile without sacrificing drivability.

This kit replaces factory front components with high-performance monotube, threaded-body shocks paired with double-bellow air springs. These dampers feature 30 levels of adjustability, allowing you to quickly transition from a soft, comfortable street ride to a stiff, performance-oriented setup for spirited driving. The dampers are secured with rubber-isolated upper and lower mounts specifically designed to minimize noise, vibration, and harshness (NVH) while keeping the vehicle planted.

• Maximum Drop: 85mm (3.35 inches) below stock height.
• Damping Control: 30 levels of adjustment for precise ride tuning.
• Strut Design: Monotube, threaded-body shocks with double-bellow air springs.
• Durability: Torture-tested to 1 million cycles at temperatures ranging from -30°F to 150°F.
• Mounting: Rubber-isolated mounts for quiet, refined operation.
• Manufacturer Part Number: 78566

Includes front air struts and required hardware for installation. This kit is backed by Air Lift Performance’s one-year, unlimited-mileage warranty.

Fits 2016-2023 Chevrolet Camaro LS, LT, LT1, SS, and ZL1 models.

Lower your vehicle's center of gravity and achieve the perfect stance without sacrificing ride quality. This Air Lift Performance front kit provides a maximum drop of 105mm (4.1 inches) from factory ride height. Unlike static lowering options, this air suspension system allows you to adjust your height at the touch of a button, eliminating issues like bottoming out or steep driveway scraping.

The kit features monotube, threaded-body struts paired with double-bellow air springs for superior body support and comfort. With 30 levels of damping adjustability, you can tune the ride from soft street cruising to a firm track-ready setup. The included T6061 red-anodized aluminum camber plates feature high-quality spherical bearings for precise steering feel and allow for up to three degrees of negative camber adjustment.

• Up to 105mm (4.1") drop for maximum versatility
• 30-level adjustable damping for precise ride tuning
• Double-bellow air springs for increased load capacity and comfort
• Monotube, threaded-body struts for superior heat dissipation
• T6061 red-anodized aluminum adjustable camber plates
• Black powder-coated, pass-through lower mounts for increased travel
• Manufacturer Part Number: 78564

Fits 2012-2015 Honda Civic and 2013-2016 Acura ILX (All Trims including Si, Hybrid, and Base).

Achieve a maximum drop of 4.48 inches without compromising ride quality with the Air Lift Performance front air suspension kit. Engineered to outperform traditional coilovers, this system utilizes compact double-bellows air springs paired with 30-level damping adjustable monotube struts. The threaded body design allows for independent ride height adjustment, meaning you can dial in your preferred stance and pressure combination for the street or the track.

Constructed for durability and precision, the kit features black chromed steel shock bodies and black powder-coated lower mounts. The included adjustable camber plates are CNC-machined from T6061 red anodized aluminum and equipped with high-quality spherical bearings for superior steering feedback. At 7 lbs lighter than the factory coil suspension, this kit reduces unsprung mass for sharper handling and improved response.

• 30-level damping adjustment from soft to race-stiff
• Adjustable lower perches for height tuning independent of air pressure
• T6061 red anodized aluminum camber plates
• Reduces unsprung weight by 7 lbs compared to OEM
• Tested for over 1 million cycles (equivalent to 100,000 miles)
• Includes stainless steel braided leader lines with 1/4in PTC fittings
• Manufacturer Part Number: 78526

Fits select 2008-2014 Honda Accord, Acura TL, and Acura TSX models. This Air Lift Performance front kit (MPN 78520) provides the ideal balance of show-stopping stance and track-proven handling, replacing heavy OEM coil suspension with a lighter, more versatile air spring system.

The kit features progressive-rate sleeve-style air springs paired with 30-level adjustable monotube shocks. These threaded-body dampers allow for independent ride height adjustment via the lower perches, meaning you can dial in your preferred fitment without sacrificing air pressure or travel. Construction includes red anodized aluminum upper mounts with high-quality monoball bearings, black chromed steel shock bodies, and red anodized end caps for superior corrosion resistance and a clean aesthetic.

• 30-level damping adjustment from soft to race-stiff
• Progressive-rate sleeve-style air springs for maximum wheel travel
• Monotube, threaded body shocks with independent height adjustment
• Components rig-tested to 1,000,000 cycles (approx. 100,000 miles)
• Dampers are dyno-tested and matched in pairs before shipping
• Includes all necessary mounting hardware and monoball upper mounts
• One-year, unlimited-mileage warranty from Air Lift Performance

Fits 2009-2024 Nissan GT-R (R35) models including Base, Premium, Nismo, Track Edition, and special editions.

The Air Lift Performance front air suspension kit (78518) delivers the ultimate balance of track-capable handling and daily-driver versatility for the Nissan GT-R. This system replaces factory struts with compact, double-bellows air springs over high-performance monotube, threaded-body shocks. Featuring 30 levels of damping adjustment with independent adjusters for compression and rebound, this kit allows for precise tuning of the R35 chassis. The shocks are equipped with piggyback-style nitrogen canisters to ensure consistent damping performance under rigorous conditions.

Built for durability and precision, the kit includes red anodized upper mounts with high-quality monoball bearings, black chromed steel shock bodies, and powder-coated lower mounts. Every key component is validated on a durability rig for over one million cycles—equivalent to 100,000 miles of use—to ensure long-term reliability.

• 30-level adjustable damping with independent compression and rebound adjusters
• Monotube shocks with piggyback nitrogen reservoirs
• Independent ride height adjustment via threaded shock bodies
• Red anodized aluminum end caps and locking rings
• Stainless steel braided leader hoses with 1/4in PTC fittings included
• Tested to one million cycles for maximum longevity
• Manufacturer Part Number: 78518

Fits 2018-2025 Tesla Model 3 and Model Y AWD models, including Long Range and Performance trims.

Lower your AWD Tesla to a more aggressive stance without sacrificing ride quality or handling. The Air Lift Performance front air suspension kit replaces your factory front struts with high-performance double-bellow air springs and threaded-body, monotube shocks. This system allows for a maximum drop of up to 112mm (4.4 inches) from the stock ride height, providing the versatility to air out at the show and maintain clearance for daily obstacles.

Built for the enthusiast, these dampers feature 30 levels of adjustment, allowing you to fine-tune the damping from soft for cruising to stiff for spirited driving. The monotube design ensures superior heat dissipation compared to twin-tube dampers, resulting in more consistent performance under demand. Additionally, the adjustable lower perches allow you to dial in your preferred pressure and height combination independently.

• Replaces OEM suspension with double-bellow air springs and monotube shocks
• 30 levels of damping adjustment for precise tuning
• Up to 112mm (4.4") drop from factory height
• Lighter than OEM coil suspension to reduce unsprung mass
• Threaded-body dampers with adjustable lower perches
• Components rig-tested to over 1 million cycles for long-term durability
• Dyno-tested and matched in pairs for consistent handling
• Manufacturer Part Number: 78102

Fits 2017-2023 Tesla Model 3 and 2020-2021 Model Y (RWD).

The Air Lift Performance 78101 front air suspension kit replaces the heavy factory front struts with a high-performance air spring and damper combination designed for maximum adjustability. This kit features double-bellow air springs paired with threaded-body monotube shocks, allowing for a total drop of up to 112mm (4.4 inches) from the stock ride height. By reducing unsprung mass compared to OEM coil suspension, this kit improves both handling response and ride quality.

For precision tuning, the monotube dampers offer 30 distinct levels of damping adjustment, ranging from comfortable daily driving to aggressive performance settings. The threaded shock bodies and adjustable lower perches allow users to dial in their preferred ride height independently of air pressure, ensuring optimal wheel travel and suspension geometry at any height. Every kit is rig-tested to over 1 million cycles and features dyno-matched shock pairs to ensure consistent performance and longevity.

• Manufacturer Part Number: 78101
• Maximum drop: 112mm (4.4 inches) from stock height
• 30 levels of damping adjustment (soft to stiff)
• High-quality monotube dampers for superior heat dissipation
• Threaded-body shocks with adjustable lower perches
• Double-bellow air springs for progressive rate performance
• Lighter than OEM coil suspension to reduce unsprung mass
• Rig-tested to 1,000,000+ cycles for durability
• Includes all necessary installation hardware

Fits 1990-2000 Lexus LS400 Base.

Lower your Lexus LS400 with precision using the Air Lift Performance rear air suspension kit. This system is engineered to replace factory rear shocks and springs with high-performance components that allow for a maximum drop of 4.9 inches (124.46mm) from stock height. The kit utilizes progressive-rate, double-bellows air springs paired with high-performance monotube, threaded-body shocks to provide superior body support and ride comfort compared to traditional coil springs.

To ensure total control over your stance and ride quality, these shocks feature 32 levels of damping adjustability, ranging from soft for cruising to stiff for performance handling. The threaded-body design and adjustable lower perches allow for independent height adjustment without affecting air pressure, giving you the flexibility to dial in the perfect pressure and comfort combination. Built for durability, the air spring end caps are CNC-machined from T6061 aluminum and finished in silver anodizing for corrosion resistance and a premium appearance.

• Fits 1990-2000 Lexus LS400 (Base)
• Maximum drop: 4.9 inches (124.46mm) from stock
• 32-level adjustable damping for precise ride tuning
• High-performance monotube, threaded-body shocks
• Progressive-rate double-bellows air springs
• T6061 aluminum end caps with silver anodized finish
• Adjustable lower perches for independent height adjustment
• Tested to 1 million cycles in temperatures ranging from -30°F to 150°F
• Manufacturer Part Number: 76516