aFe CONTROL Ride Height Simulator modules are a simple plug and play connector that allows installation of aftermarket lowering or lift kits that change vehicle ride height more than 1”. These work in tandem with our Electronic Shock Delete kit 436-401001-N. These Modules are sold as a set of four.

• Eliminates Suspension Control Error Light When Lowered/Raised more than 1”
• Direct Fit Installation Requires No Modifications
• Simple Plug-and-Play Installation
• GM Style Weatherpack Connector
• High Temp Thermal Epoxy
• Proudly Made in the USA

This Part Fits:

This oil pan has an increased oil capacity of approximately 1 quart over stock for better performance over a longer duration. The black powder coat on this pan helps protect it from the outside conditions, providing both longevity and style. Built-in internal and external fins transfer heat from the oil to the outside air for maximum cooling. This pan incorporates a magnetic drain plug to capture loose particles for maximum protection.

• Neodymium Magnetic Drain Plug for Engine Protection
• Constructed Out of Durable Cast Aluminum
• Adds Approximately 1 Quart Over Stock
• Incorporates Factory Oil Level Sensor
• Black Powder Coat with Machined Fins
• RTV Silicone Included

This Part Fits:

This oil pan has an increased oil capacity of approximately 1 quart over stock for better performance over a longer duration. The black powder coat on this pan helps protect it from the outside conditions, providing both longevity and style. Built-in internal and external fins transfer heat from the oil to the outside air for maximum cooling. This pan incorporates a magnetic drain plug to capture loose particles for maximum protection.

• Neodymium Magnetic Drain Plug for Engine Protection
• Constructed Out of Durable Cast Aluminum
• Adds Approximately 1 Quart Over Stock
• Black Powder Coat with Machined Fins
• RTV Silicone Included

This Part Fits:

aFe Power PROGUARD Oil Filters deliver increased flow and efficiency that are demanded in today's vehicles. These oil filters utilize a high performance synthetic media for maximum filtration with minimal flow restriction and are engineered to ISO 4548-12. Each canister features a 3/8" ratchet drive for easy removal and is constructed from high strength steel. 44-LF037 is a direct OE replacement filter for Toyota 90915-YZZD1.

• Designed For Extended Interval Oil Changes
• High Flow Rates And Outstanding Filtration
• Easy Off 3/8 in. Ratchet Drive Boss
• Engineered to ISO 4548-12 Standards
• High Strength Steel Canister
• Direct Stock Replacement
• 4 Pack

This Part Fits:

Upgrade your vehicle’s ignition system with aFe POWER SCORCHER High-Performance Ignition Coils – a premium direct replacement for your factory coils. Our high-performance coils have a lower primary resistance than factory units, resulting in a high energy spark that ensures complete combustion from idle to redline. Experience up to 20% more spark energy compared to your factory coils. SCORCHER Ignition Coils keep the pace with the demands of higher RPM ranges and at wide-open throttle, always ensuring your ignition system is performing at its best.

• Improved Drivability & Smoother Idle
• Increase Horsepower & Torque
• Up to 20% More Spark Energy
• Premium Direct Replacement
• Easier Cold Starts
• Longer Coil Life

This Part Fits:

This 360-degree radial flow air filter features a 5" flange and our pre-oiled Pro 5R media with five layers of progressively finer cotton gauze media for maximum performance. It provides your engine with the largest amount of high-flowing air and delivers the highest power gains in most cases. This media is perfect for street use. Its inverted top makes for more filter surface area, resulting in longer service intervals. The filter features an injection molded base and top for lighter weight and rigidity. Its base includes a built-in 3-angle velocity stack for smooth, even airflow and captive screws to easily attach the filter to the housing. Quantum uses an integrated filter-to-housing design that attaches both components with four captive screws, making for a positive surface area seal, as well as easy installation and maintenance. Its durable sealed housing features a unique, five rib, industrial-grade look for aFe quality recognition. Quantum uses a dyno-tuned, computer designed intake tube to achieve optimum air flow and a perfect fit. Its XLPE (cross-linked polyethylene) polymer material is heat soak resistant and extremely durable. This Quantum intake system includes a flexible bellows-style coupling and a durable reinforced ribbed silicone coupling. Quantum intakes are designed with fewer parts for a quick and easy installation. This is a direct fit intake system that utilizes factory mounting points and requires no cutting or modifications. All necessary clamps, couplings, and hardware are included.

• Durable XLPE Construction and Sealed Housing Protects From Impact, Extreme Temperatures, and Other Elements
• Innovative Filter-to-Housing Interface and Minimal Hardware for Fast and Easy Installation
• Washable and Reusable Pro 5R Air Filter for Maximum Performance

This Part Fits:

Upgrade your vehicle’s ignition system with aFe POWER SCORCHER High-Performance Ignition Coils – a premium direct replacement for your factory coils. Our high-performance coils have a lower primary resistance than factory units, resulting in a high energy spark that ensures complete combustion from idle to redline. Experience up to 20% more spark energy compared to your factory coils. SCORCHER Ignition Coils keep the pace with the demands of higher RPM ranges and at wide-open throttle, always ensuring your ignition system is performing at its best.

• Improved Drivability & Smoother Idle
• Increase Horsepower & Torque
• Up to 20% More Spark Energy
• Premium Direct Replacement
• Quantity: 1 Coil Pack
• Easier Cold Starts
• Longer Coil Life

This Part Fits:

Momentum’s innovative filter-to-housing interface was built to feature the largest air filter possible. This 9” tall 360-degree radial flow air filter features our pre-oiled Pro 5R media with five layers of progressively finer cotton gauze media for maximum performance. It provides your engine with the largest amount of high-flowing air and delivers the highest power gains in most cases. This media is perfect for street use. The smooth one-piece sealed housing, constructed of heat-resistant cross-linked polyethylene (XLPE), features our filter-to-housing interface. Its innovative design minimizes the total number of parts, making for an easy installation. A large, clear sight window allows for hassle-free filter inspection, without having to disassemble your system. This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat soak resistant and extremely durable. Momentum GT intakes are designed with fewer parts for a fast and easy installation. This is a direct fit intake system that utilizes factory mounting points and requires no cutting or modifications. All necessary T-bolt clamps, couplings, and hardware are included.

• Built-In Sight Window Provides Easy Inspection of Filter Without Disassembly
• Unique Filter-to-Housing Interface for Easy Installation (US PAT 9440175)
• One-Piece Heat Resistant Sealed Housing with Auxiliary Air Inlet
• Washable and Reusable Pro 5R Air Filter for Maximum Performance
• Direct Fit w/ Magnuson Supercharger

This Part Fits:

Momentum’s unique filter-to-housing interface was built to feature the largest air filter possible. This 9” tall 360-degree radial flow air filter features our oil-free Pro DRY S media with three layers of synthetic media for maximum convenience. Its progressive layering provides great filtration efficiency and dust holding capacity, while not requiring the use of oils. This media is best suited for street and light off-road use. The smooth one-piece sealed housing, constructed of heat-resistant red cross-linked polyethylene (XLPE), features our filter-to-housing interface. Its innovative design minimizes the total number of parts, making for an easy installation. A large, clear sight window allows for hassle-free filter inspection, without having to disassemble your system. This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its red XLPE material is heat soak resistant and extremely durable. Momentum GT intakes are designed with fewer parts for a fast and easy installation. This is a direct fit intake system that utilizes factory mounting points and requires no cutting or modifications. All necessary T-bolt clamps, couplings, and hardware are included.

• Durable Red XLPE Construction and Sealed Housing Protects From Impact, Extreme Temperatures, and Other Elements
• Clear Sight Window for Convenient Filter Inspection Without Disassembly
• Washable and Reusable Pro DRY S Air Filter for Maximum Convenience

This Part Fits:

Smooth transitions in the mandrel-bent aluminum tubing decrease turbulence and minimize pressure loss, increasing horsepower and torque. This charge pipe kit includes high-quality, stainless-steel, spring-loaded T-bolt clamps and heavy-duty, 5-ply, polyester reinforced silicone couplings for superior strength and durability. Finished in wrinkle black powder coating with a unique laser-etched aFe power logo for a custom look.

• Directly replace your Superduty’s restrictive squished steel charge pipe with aFe's BladeRunner free-flowing, heat-resistant aluminum tube.
• Features Premium Stainless-Steel Spring-Loaded T-Bolt Clamps And 5-Ply Silicone Couplings
• 1/8" NPT port Provided for Connecting Sensors or Water Methanol Injection
• Powder Coated wrinkle black for Heat and Corrosion Resistance
• TIG-Welded 3" Aluminum Tubing

This Part Fits:

This aFe POWER 90mm Throttle Body and adapter kit improves engine air flow over the stock 80mm throttle body. The extra air flow will increase horsepower and throttle response. Performance gains will be more noticeable as more upgrades are added to the vehicle. All adapters are constructed from 6061-T6 billet aluminum and are precision machined for light weight, high strength, and perfect fit and finish. The Serrated/Swirl combination design creates intake turbulence in the combustion chamber which breaks up the fuel creating a more complete combustion cycle increasing horsepower, torque and improving throttle response. This aFe POWER 90mm throttle body kit uses all factory mounting locations providing stability and a hassle-free installation. All needed hardware is included with the kit.

• More Power and Better Throttle Response
• Direct Bolt-On For Simple Installation
• Plug-n-play Electronics
• Billet Aluminum Adapter
• 90mm Bore Diameter
• No Tuning Required
• Gasket Included

This Part Fits:

Upgrade your vehicle’s ignition system with aFe POWER’s SCORCHER High-Performance Ignition Coils – a premium direct replacement for your factory coils. Our high-performance coils have a lower primary resistance than factory units, resulting in a high energy spark that ensures complete combustion from idle to redline. Experience up to 20% more spark energy compared to your factory coils. SCORCHER Ignition Coils keep the pace with the demands of higher RPM ranges and at wide-open throttle, always ensuring your ignition system is performing at its best. When upgrading to our Scorcher High-Performance Ignition Coils, it is recommended to replace your vehicle's spark plugs at the time of install for optimal performance.

• Quantity: 1 – Please order the quantity needed for your engine configuration
• Improved Drivability & Smoother Idle
• Increase Horsepower & Torque
• Up to 20% More Spark Energy
• Premium Direct Replacement
• Easier Cold Starts
• Longer Coil Life

This Part Fits:

Upgrade your vehicle’s ignition system with aFe POWER’s SCORCHER High-Performance Ignition Coils – a premium direct replacement for your factory coils. Our high-performance coils have a lower primary resistance than factory units, resulting in a high energy spark that ensures complete combustion from idle to redline. Experience up to 20% more spark energy compared to your factory coils. SCORCHER Ignition Coils keep the pace with the demands of higher RPM ranges and at wide-open throttle, always ensuring your ignition system is performing at its best. When upgrading to our Scorcher High-Performance Ignition Coils, it is recommended to replace your vehicle's spark plugs at the time of install for optimal performance.

• Quantity: 6 ignition coils for L6 engine configurations
• Improved Drivability & Smoother Idle
• Increase Horsepower & Torque
• Up to 20% More Spark Energy
• Premium Direct Replacement
• Easier Cold Starts
• Longer Coil Life

This Part Fits:

Take control of your driving experience with the Bluetooth-enabled Pedal 2 Metal Throttle Enhancer, expertly designed to eliminate the sluggish throttle response often found in modern drive-by-wire systems. By intercepting and remapping the electronic signals sent to your ECM (Electronic Control Module), Pedal 2 Metal delivers smooth, responsive acceleration that feels both intuitive and controlled. With the aFe POWER Pedal 2 Metal installed, uphill starts, overtaking with a load, and quick gear shifts become effortless. Say goodbye to throttle lag and unlock a throttle response you can tune to match your driving style and road conditions—all with a simple tap on your smartphone. With a simple 5-minute installation using the OE connector located behind the accelerator pedal, the Pedal 2 Metal Throttle Booster integrates seamlessly without any need for wire cutting or modifications. There is no physical switch to install, as the Pedal 2 Metal utilizes the latest Bluetooth technology to control your throttle response with an easy-to-navigate interface. Each Pedal 2 Metal unit is designed specifically for individual vehicle models, using factory-style connectors to ensure a straightforward, secure installation. Its sleek, compact design eliminates the hassle of bulky wiring, module cases, and switch panels, allowing it to blend discreetly with your vehicle’s original equipment for a clean, unobtrusive look.

• Instantly improve your vehicle’s throttle response and drivability with the Pedal 2 Metal Throttle Enhancer.
• Compact Dimensions for Stealthy Install Under the Kick Panel
• Module Utilizes Factory Connectors & Installs in Minutes
• 5 Driving Modes w/ Adjustable Sensitivity Settings
• Bluetooth App Available for both iOS and Android
• Valet and Lockout Functions for Added Security
• Hassle-Free, Plug-and-Play Installation

This Part Fits:

Momentum’s unique filter-to-housing interface was built to feature the largest air filter possible. This 9” tall, pre-oiled 360-degree radial flow air filter features a 6-1/2" x 4-3/4” oval flange and our pre-oiled Pro 10R media with ten layers of progressively finer cotton gauze media for maximum performance and filtration. Its inverted top and large surface area provide much longer life between maintenance intervals, while reinforced metal provides maximum strength to prevent filter collapse. This media is best suited for off-road applications. The smooth one-piece sealed housing, constructed of heat-resistant cross-linked polyethylene (XLPE), features our patented (US PAT 9440175) filter-to-housing interface. Its innovative design minimizes the total number of parts, making for an easy installation. A large, clear sight window allows for hassle-free filter inspection, without having to disassemble your system. The housing features an optional auxiliary air inlet that pulls in additional air. A plug is provided to close the auxiliary opening. This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat soak resistant and extremely durable. Stainless-steel T-bolt clamps are included for strength, and a premium bellows silicone coupling allows for ample flexibility. Momentum HD intakes are designed with fewer parts for a fast and easy installation

• Innovative Filter-to-Housing Interface (US PAT 9440175) and Minimal Hardware for Fast and Easy Installation (Roughly 30 Minutes)
• Washable and Reusable Pro 10R Air Filter for Maximum Dust Holding Capacity and Longevity
• Clear Sight Window for Convenient Filter Inspection Without Disassembly
• Premium T-Bolt Clamps and a Bellows Coupling Provide a Secure Seal
• Renderings may not represent the final product
• Sealed Housing Utilizes Factory Air Inlet

Momentum’s unique filter-to-housing interface was built to feature the largest air filter possible. This 9” tall 360-degree radial flow air filter features a 6-1/2" x 4-3/4” oval flange and our oil-free Pro DRY S media with three layers of synthetic media for maximum convenience. Its progressive layering provides great filtration efficiency and dust holding capacity, while not requiring the use of oils. This media is best suited for street and light off-road use. Its inverted top makes for more filter surface area, resulting in longer service intervals, while reinforced metal provides maximum strength to prevent filter collapse. The smooth one-piece sealed housing, constructed of heat-resistant cross-linked polyethylene (XLPE), features our patented (US PAT 9440175) filter-to-housing interface. Its innovative design minimizes the total number of parts, making for an easy installation. A large, clear sight window allows for hassle-free filter inspection, without having to disassemble your system. The housing features an optional auxiliary air inlet that pulls in additional air. A plug is provided to close the auxiliary opening. This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat soak resistant and extremely durable. Stainless-steel T-bolt clamps are included for strength, and a premium bellows silicone coupling allows for ample flexibility. Momentum HD intakes are designed with fewer parts for a fast and easy installation.

• Innovative Filter-to-Housing Interface (US PAT 9440175) and Minimal Hardware for Fast and Easy Installation (Roughly 30 Minutes)
• Washable and Reusable Pro 10R Air Filter for Maximum Dust Holding Capacity and Longevity
• Clear Sight Window for Convenient Filter Inspection Without Disassembly
• Premium T-Bolt Clamps and a Bellows Coupling Provide a Secure Seal
• Renderings may not represent the final product
• Sealed Housing Utilizes Factory Air Inlet

This cat-back exhaust system is constructed of 2-1/4 IN - 2-1/2 IN mandrel-bent brushed finished 304 stainless steel tubing for maximum strength and durability. This system features high-flow 304 stainless steel mufflers, producing a deep sound. The mufflers has a polished finish for ultimate corrosion resistance. Finishing off this exhaust system are dual 4-1/2 IN diameter blue flame 304 stainless steel clamp-on exhaust tips. The tips features a laser etched Takeda logo for a unique style. This system produces a deep sound unleashing all available horsepower and torque. Utilizing a factory style flange and hangers this system is a direct bolt-on system, which requires no cutting or modifications for a hassle-free installation. A mitered merge collector is used to decrease turbulence and increase exhaust velocity resulting in increased horsepower, torque and improved throttle response. State-of-the-art computer-aided design technology is utilized for precise vehicle fitment. 100% TIG-Welded for race-proven strength and durability.

• Constructed from 2-1/2 IN - 2-1/4 IN Mandrel-Bent Brushed Finished 304 Stainless Steel Tubing
• Dual 4-1/2 IN Diameter Blue Flame 304 Stainless Steel Clamp-On Exhaust Tips
• Utilizes Factory Style Flange and Hangers for a Secure Fit
• 100% TIG-Welded for Strength and Durability

This Part Fits:

A custom computer designed roto-molded housing eliminates the use of multiple components and ensures the coolest air intake charge available. A clear sight window allows for filter inspection without removal of the airbox. The roto-molded housing is made out of black cross-linked polyethylene. The housing is designed to retain the same water fording height as the factory intake system while providing more air flow and better protection. This System uses a CAD designed, dyno-tuned, roto-molded intake tube to achieve maximum power gains while maintaining a perfect fit. This tube has built-in resonance chambers to catch un-wanted air intake noises. This Momentum GT intake system was designed around the largest filter possible to allow maximum performance and filtration. This filter has a massive 5" round flange and is 8" tall with an inverted top and features our pre-oiled Pro 5R media. The Pro 5R performance air filter features 5-layers of progressively finer mesh cotton media providing maximum airflow and performance. The unique air filter to housing interface (patent pending) allows for maximum filter size which increases the available air volume while simplifying the installation process. Premium stainless steel T-bolt clamps are used for durability and provide the best corrosion resistance possible. Momentum GT intakes are designed with fewer parts for a quick and simple installation

• 5-Layer Progressive Cotton Gauze Media
• Washable And Reusable Air Filter
• Pro 5R Filter Media
• Rotomolded Tube

This Part Fits:

aFe POWER Carbon Cabin Filters clean the air entering through the ventilation system of your vehicle by reducing impurities such as dust, soot and pollen. Contains activated carbon granules to help remove odors and fumes for cleaner, fresher cabin air for you and your passengers.

• Recommended Replacement Every 12,000-15,000 Miles
• Helps Keep A/C Evaporator Clean and Microbe-Free
• Activated Carbon Reduces Odors And Fumes
• Easy To Install

This Part Fits: