Fits 2016-2024 Chevrolet Camaro SS (6.2L) models equipped with factory single tips and without the Dual Mode Exhaust (NPP) valves.

The Borla S-Type Rear Section exhaust system delivers an aggressive, high-performance exhaust note while maintaining a drone-free cabin environment. This 2.75-inch diameter system is specifically engineered for Camaro SS coupes that came from the factory with single tips and did not include the NPP valve option. Built from premium T-304 stainless steel, this system offers superior durability and corrosion resistance compared to lower-grade T-400 series alternatives. Ultra-smooth mandrel-bent tubing ensures maximum exhaust flow and velocity, helping to unleash performance gains and the signature Borla Sound of Power.

This rear section features dual 4.5-inch round polished T-304 stainless steel tips for a refined, custom look. For owners looking to further optimize their exhaust path, this system is compatible with Borla X-Pipe and Mid-Pipe kits (Part #60607 or #60610) to create a full Cat-Back configuration on Coupe models.

• System Type: Rear Section / Axle-Back
• Sound Profile: S-Type (Aggressive, No Drone)
• Tubing Diameter: 2.75 in.
• Tip Diameter: 4.5 in. Round Polished
• Material: T-304 Stainless Steel
• Fitment Note: Fits non-NPP (Dual Mode) models only
• Manufacturer Part Number: 11922
• Warranty: Borla Million-Mile Warranty

Fits 2016-2024 Chevrolet Camaro SS models equipped with V8 engines and either manual or automatic transmissions.

The Borla ATAK (Abusive Tongue and Cheek) rear section exhaust system is engineered for Camaro SS owners seeking the most aggressive sound profile available without introducing interior cabin drone. This axle-back system (MPN 11921CB) is constructed from premium T-304 austenitic stainless steel, providing superior corrosion resistance and durability compared to T-400 series alternatives. The system features 2.75-inch mandrel-bent piping that transitions to 2.5-inch tailpipes, terminating in quad 4-inch round tips finished in a high-temperature ceramic black.

This system is designed to fit vehicles equipped with the factory Dual Mode Exhaust (NPP) valves or those using a dual-split rear exit bumper cover. Note that this Borla system does not include NPP valves; however, it can be combined with Borla adapter kit 60605 to integrate NPP functionality.

• System Type: Rear Section / Axle-Back
• Sound Level: ATAK (Most Aggressive)
• Material: T-304 Stainless Steel
• Finish: Ceramic Black Tips
• Piping Diameter: 2.75" into 2.5"
• Tip Description: Quad 4" Round Rolled Edge Angle-Cut
• Installation: Bolts to factory mounting points
• Manufacturer Part Number: 11921CB

Fits 2016-2024 Chevrolet Camaro SS (6.2L).

Give your Camaro SS the aggressive Borla ATAK (Abusive Tongue and Cheek) sound profile with this premium rear-section axle-back exhaust. Designed for owners seeking the loudest, most performance-oriented sound in the Borla lineup, this system provides a deep, muscular tone without the cabin drone associated with lesser exhausts. This 2.75-inch diameter system features a dual-split exit layout, utilizing 2.5-inch tail pipes and quad 4-inch polished T-304 stainless steel tips.

This system is designed for vehicles equipped with factory Dual Mode Exhaust (NPP) valves or those using the dual-split rear exit bumper cover. Note that this Borla system does NOT include NPP valves; however, you can integrate your factory valves using Borla Adapter Kit 60605. The system is constructed from high-grade T-304 austenitic stainless steel and utilizes mandrel-bent tubing for maximum exhaust velocity and flow.

• System Type: Axle-Back Exhaust (Rear Section)
• Sound Level: ATAK (Most Aggressive)
• Material: T-304 Stainless Steel
• Piping Diameter: 2.75" into dual 2.5" exit
• Tip Description: Quad 4" Round Polished T-304 Stainless Steel
• MPN: 11921
• Exit: Dual Split Rear Exit
• Warranty: Borla Million-Mile Warranty

Note: Can be upgraded to a full Cat-Back system by adding Borla X-Pipe/Mid-Pipe 60607 or 60610 (Mid-pipes do not fit convertible models).

Fits 2016-2025 Mazda MX-5 Miata models including Sport, Club, Grand Touring, and RF (2.0L).

The Borla S-Type Axle-Back exhaust system (MPN 11919) is engineered specifically for the ND-generation MX-5 Miata to deliver a deep, aggressive tone without interior cabin drone. Utilizing patented straight-through and multi-core technology, this system increases exhaust velocity to improve flow and engine response. Each unit is constructed from premium T-304 stainless steel, offering superior corrosion resistance compared to 400-series alternatives.

This rear-section system features 2.25-inch ultra-smooth mandrel-bent tubing to ensure maximum exhaust volume. The installation is finished with a single 2.5-inch round brushed T-304 stainless steel tip, providing a refined, performance-oriented look. Precision CNC manufacturing ensures a direct fit to factory mounting points.

• System Type: Axle-Back / Rear Section
• Sound Level: S-Type (Aggressive/No Drone)
• Tubing Diameter: 2.25 inches
• Tip Description: 2.5 inch Round Brushed T-304 Stainless Steel
• Material: High-quality T-304 Stainless Steel
• Construction: Mandrel-bent for maximum flow
• Warranty: Borla Million-Mile Warranty
• Manufacturer Part Number: 11919

Fits select 2014-2023 Mini Cooper S, John Cooper Works, and Cooper Clubman S models (2.0L).

Upgrade your vehicle's presence with the Borla S-Type Rear Section Exhaust (11915), engineered to deliver the signature Borla "Sound of Power"—a deep, aggressive exhaust note under acceleration without intrusive cabin drone at cruising speeds. This system replaces the rear section of your exhaust to improve flow and provide a significant aesthetic upgrade over the factory hardware.

Constructed from premium T-304 stainless steel, this system features 2.5-inch mandrel-bent tubing to ensure maximum exhaust velocity. Borla’s patented straight-through and multi-core technology reduces backpressure, helping to unleash the potential of the 2.0L turbocharged engine. The system is finished with dual 4-inch mirror-polished T-304 stainless steel tips for a high-performance look that resists corrosion.

• Premium T-304 stainless steel construction for superior durability over T-400 series alternatives
• 2.5-inch diameter mandrel-bent piping for ultra-smooth flow
• Dual 4-inch mirror-polished stainless steel tips
• S-Type sound profile: Aggressive tone with zero interior drone
• Precision CNC manufacturing for an accurate, bolt-on fit
• Patented straight-through and multi-core technology
• Manufacturer Part Number: 11915
• Backed by the Borla Million-Mile Warranty

Fits 2015-2019 Chevrolet Corvette Z06 and 2017-2019 Corvette Grand Sport (6.2L). Note: Grand Sport models fit manual transmission only.

The Borla ATAK (Acoustically Tuned Applied Kinetics) Axle-Back system is designed for Corvette owners seeking the most aggressive exhaust note in the Borla lineup. This high-performance system utilizes patented multi-core technology to increase exhaust velocity, improving flow and unleashing hidden horsepower and torque. Built from premium T-304 austenitic stainless steel, it offers superior durability and corrosion resistance compared to T-400 series alternatives.

• Valving: Retains factory NPP dual-mode valves; does NOT include AFM valves.
• Tips: Quad 4.25-inch intercooled T-304 stainless steel tips with a high-temperature ceramic black finish.
• Construction: CNC-manufactured with ultra-smooth mandrel bends to ensure precise fitment and maximum flow.
• Warranty: Million-Mile warranty on non-moving parts; 1-year warranty on exhaust valves.
• Note: Does not cover failures of original equipment AFM or NPP actuators.

Fits 2014-2025 Lexus IS250 and IS350 models (2.5L / 3.5L).

The Borla S-Type Axle-Back exhaust system (MPN 11898) is designed to deliver an aggressive acoustic profile and increased exhaust velocity without introducing cabin drone. Constructed from premium T-304 stainless steel—a material far superior to T-400 series alternatives in corrosion resistance—this system uses 2.25-inch mandrel-bent tubing to ensure maximum flow and a precise fit.

This system features 4.25" x 3.5" oval polished T-304 stainless steel tips. Note: 2014-2017 Lexus IS vehicles originally feature oval valance openings, while 2018-2025 models feature rectangular openings; these Borla tips are designed to integrate with both valance styles for a clean, performance-oriented aesthetic.

• System Type: Axle-Back
• Sound Level: S-Type
• Material: T-304 Stainless Steel
• Tubing Diameter: 2.25"
• Tip Description: 4.25" x 3.5" Oval Polished Tips
• Manufacturing: CNC-Machined
• Manufacturer Part Number: 11898

Vehicle Fitment:

Fits select 2014-2019 Toyota Corolla models (1.8L), including L, LE, LE Eco, S, SE, Special Edition, and XSE 4-door sedans. Note: Does not fit Hatchback models.

Upgrade your vehicle's sound and performance with the Borla S-Type Rear Section Exhaust. This system is designed specifically for the 1.8L Corolla FWD sedan with either automatic or manual transmissions. Utilizing Borla's patented straight-through technology, this rear section replaces the restrictive factory muffler to deliver the signature S-Type sound—a deep, aggressive growl under acceleration that remains comfortable for daily driving.

Constructed from premium austenitic stainless steel, this system offers significantly better corrosion resistance than factory 409-grade or aluminized steel components. The single rear exit features a handsome polished oval rolled angle-cut tip, providing a refined aesthetic to the Corolla's rear profile.

• System Type: Rear Section (Axle-Back)
• Series: S-Type
• Material: T-304 Austenitic Stainless Steel
• Tip Style: Single Oval Rolled Angle-Cut
• Installation: Easy bolt-on to factory mid-pipe
• Drivetrain: FWD 4-Door Sedan (AT/MT)
• Manufacturer Part Number: 11897

Each system is precision-manufactured for an exact fit and is backed by Borla's million-mile warranty for long-term durability and peace of mind.

Fits select 2015-2023 Ford Mustang EcoBoost, EcoBoost Premium, V6, and 2016 GT models (2.3L). This Borla S-Type Rear Section exhaust is designed to unleash hidden horsepower by increasing exhaust velocity. Using patented straight-through and multi-core technology, this axle-back system delivers the distinctive Borla Sound of Power with increased driving excitement and optimized fuel economy.

Constructed from premium T-304 stainless steel, this system is significantly more durable than T-400 series alternatives. The 2.25-inch mandrel-bent tubing ensures maximum exhaust flow, while computer-controlled CNC manufacturing guarantees a precise fit to factory mounting points. Note: This system does NOT fit Convertible models or vehicles equipped with the Active Valve Exhaust (4 tips). For convertible applications, please see part numbers 11938 and 11939.

• System Type: Rear Section / Axle-Back
• Series: S-Type
• Tubing Diameter: 2.25 inches
• Tip Description: 4.0-inch Bright Chrome T-304 Stainless Steel
• Material: T-304 Stainless Steel
• Exit Style: Single Split Rear Exit
• Manufacturer Part Number: 11889
• Warranty: Million-Mile Warranty

Fits 2015-2017 Ford Mustang GT, GT Premium, and GT 50 Years Limited Edition (5.0L V8).

Upgrade your Mustang's exhaust note with the Borla S-Type Axle-Back system. This rear-section exhaust is engineered to increase exhaust velocity and improve flow using patented straight-through and multi-core technology. Constructed from premium T-304 stainless steel, it offers superior durability over 400-series alternatives. The system features 2.5-inch mandrel-bent tubing and 4-inch tips with a high-end black chrome finish.

• Fits both manual and automatic transmissions
• 2.5-inch diameter T-304 stainless steel piping
• Dual 4-inch black chrome-finished T-304 stainless tips
• Ultra-smooth mandrel bends for maximum flow and power
• Precision computer-controlled CNC manufacturing for an accurate fit
• Manufacturer Part Number: 11887BC
• Borla Million-Mile Warranty

Note on Tip Maintenance: To preserve the black chrome finish, do not use Borla Stainless Steel Polish (p# 21499). Clean tips only with hot water and a microfiber cloth.

Fits 2015-2017 Ford Mustang GT, GT Premium, and GT 50 Years Limited Edition (5.0L).

The Borla S-Type Rear Section exhaust system (PN: 11887) is engineered to enhance the acoustic profile and exhaust flow of the S550 Mustang GT. Featuring the iconic S-Type sound, this system provides an aggressive, deep-throated exhaust note under load while maintaining a refined cabin environment for daily driving. This rear-section kit connects directly to the factory mid-pipe for a straightforward bolt-on installation.

Built from premium T-304 austenitic stainless steel, this system is superior to 409 or aluminized steel in both durability and corrosion resistance. The 2.5-inch mandrel-bent tubing ensures maximum exhaust velocity, while the dual 4-inch polished stainless steel tips provide a high-performance aesthetic. Like all Borla systems, it is backed by a million-mile warranty.

• Series: S-Type
• Configuration: Rear Section (Axle-Back)
• Tubing Diameter: 2.5 in.
• Tip Size: 4.0 in. Polished Stainless Steel
• Material: T-304 Stainless Steel
• Manufacturer Part Number: 11887
• Installation: Bolts to factory mounting points

Fits 2014-2019 Chevrolet Corvette Stingray (excluding Grand Sport models with manual transmission).

The Borla ATAK (Abusive Tongue and Cheek) axle-back exhaust system is engineered for C7 Corvette owners seeking the most aggressive sound profile available. This system utilizes Borla’s patented straight-through and multi-core technology to optimize exhaust velocity and maximize flow. Constructed from premium T-304 austenitic stainless steel, it offers superior durability over 409-grade alternatives. The system is finished with 4.25-inch tips featuring a high-temperature ceramic matte black coating for a stealthy, high-performance aesthetic.

Note on AFM/NPP Valves: This system does NOT include AFM or NPP valves. It is designed for vehicles not equipped with these features or those where they have been disabled. While the system includes non-functioning mounts for AFM actuators to prevent loose components, a Check Engine Light (CEL) will occur on AFM-equipped vehicles unless the system is tuned.

• Series: ATAK
• System Type: Axle-Back
• Material: T-304 Stainless Steel
• Piping Diameter: 2.75in into muffler; Dual 2.0in outlets
• Tip Description: 4.25in Round Rolled Edge Angle-Cut with Ceramic Matte Black finish
• Exit: Center Rear Exit
• MPN: 11869CB
• Warranty: Million-Mile Warranty

Fits 2014-2019 Chevrolet Corvette C7 Stingray, Z06, ZR1, and Grand Sport models (Excludes Grand Sport with Manual Transmission). This axle-back system is designed for vehicles equipped with factory Active Fuel Management (AFM) and NPP dual-mode exhaust valves.

The Borla ATAK (Abusive Tongue-and-Cheek) series is engineered for enthusiasts seeking the highest decibel levels in the Borla lineup while maintaining a drone-free experience. Constructed from premium T-304 stainless steel, this system features 2.75-inch mandrel-bent tubing to maximize exhaust velocity and flow. The system is finished with quad 4.25-inch intercooled tips in a durable high-temperature Ceramic Black finish for a stealthy, high-performance aesthetic.

• System Type: Axle-Back Exhaust
• Series: ATAK
• Tubing Diameter: 2.75in into muffler, dual 2.75in out
• Tip Description: Quad 4.25in Round Rolled Edge Intercooled Ceramic Black
• Material: T-304 Stainless Steel
• Valve Integration: Includes AFM and NPP valves
• Warranty: Million-Mile warranty on non-moving parts; 1-year warranty on exhaust valves
• MPN: 11856CB

Note: This system replaces the rear muffler section. While it integrates with factory actuator motors, failures of the original equipment (OE) AFM or NPP actuators themselves are not covered under the Borla warranty.

Fits 2014-2019 Chevrolet Corvette Stingray, Z06, Grand Sport, and ZR1 (6.2L). Please note: This system fits all listed models EXCEPT Grand Sport models equipped with a manual transmission.

The Borla S-Type Axle-Back exhaust system (MPN 11855) is engineered to unleash the performance potential of the C7 Corvette while maintaining the versatility of factory exhaust modes. This system features Borla's patented straight-through and multi-core technology to increase exhaust velocity and improve flow. Constructed entirely from premium T-304 stainless steel, it provides significantly better corrosion resistance and durability than standard T-400 series or 409-grade alternatives.

This specific configuration is designed for vehicles equipped with both Active Fuel Management (AFM) and Dual Mode Exhaust (NPP), including the necessary valves to retain full electronic control. The system is finished with quad 4.25-inch polished rolled stainless steel tips in a center-exit configuration, providing the aggressive "S-Type" sound profile that is deeper and louder than stock without being overly abrasive.

• Material: High-quality T-304 stainless steel construction
• Tip Diameter: Quad 4.25-inch polished stainless steel tips
• Valve Support: Includes integrated AFM and NPP valves
• Manufacturing: CNC-manufactured with mandrel bends for maximum flow
• Series: S-Type (Borla's signature aggressive yet refined sound)
• Manufacturer Part Number: 11855
• Warranty: Million-Mile warranty on non-moving parts; 1-year warranty on exhaust valves

Fits 2013-2017 Honda Accord Coupe EX, EX-L, LX-S, and Touring models (3.5L). This system is specifically designed for vehicles factory-equipped with a split rear/dual-exit exhaust and will not fit models with a single-exit system.

The Borla 11853 Touring Series axle-back exhaust delivers a refined, deep exhaust note that is louder than stock but civil enough for daily commuting. Constructed from premium T-304 stainless steel, this system provides superior corrosion resistance over 400-series alternatives. Every pipe is CNC-manufactured with ultra-smooth mandrel bends to maintain consistent diameter and maximize exhaust gas velocity.

Featuring Borla's patented straight-through and multi-core technology, this rear-section exhaust reduces backpressure to improve engine efficiency and throttle response. The system is finished with polished T-304 stainless steel tips for a high-end look that complements the Accord's factory rear valence.

• System Type: Axle-Back / Rear Section
• Series: Touring
• Tubing Material: T-304 Stainless Steel
• Exit Style: Single Split Rear Exit
• Tip Finish: Polished Stainless Steel
• Installation: Bolts to factory mounting points
• Manufacturer Part Number: 11853
• Warranty: Million-Mile Warranty

Fits 2013-2015 Cadillac ATS Base, Luxury, Performance, and Premium models (2.0L) with automatic transmission and RWD.

Upgrade your Cadillac ATS with the Borla Single Split Rear Exit Rear Section exhaust system. This performance rear-section is designed to bolt directly to your factory mid-pipe, replacing the restrictive OE rear muffler to improve exhaust flow and deliver a more aggressive, tuned sound without the harshness of a full racing system. It provides a perfect balance for enthusiasts seeking enhanced performance and a premium exhaust note for their daily driver.

• Constructed from high-quality austenitic stainless steel for superior corrosion resistance compared to 409 or aluminized steel
• Single split rear exit configuration with handsome polished stainless steel Borla tips
• Precision mandrel-bent tubing ensures maximum flow and reduced backpressure
• Direct bolt-on installation using factory mounting points
• Manufacturer Part Number: 11844
• Backod by Borla's Million-Mile Warranty

Fits 2013-2017 Subaru Impreza, XV Crosstrek, and Crosstrek (2.0L).

The Borla 11843 S-Type Axle-Back Exhaust System is engineered to improve exhaust flow and deliver a distinct, performance-oriented sound profile for your Subaru. This system replaces the restrictive factory rear muffler section, connecting directly to the OEM mid-pipe for a straightforward bolt-on installation. Built from premium austenitic stainless steel, it offers superior corrosion resistance compared to 409 or aluminized steel, ensuring long-lasting durability through harsh weather and road conditions.

This system features a single right rear exit finished with a polished 3.19 in. x 5 in. round rolled angle-cut tip, providing a refined aesthetic that complements the vehicle's styling. Borla’s patented technology ensures maximum flow while maintaining a drone-free experience at highway speeds.

• Series: S-Type Axle-Back
• Exit Configuration: Single Right Rear Exit
• Tip Type: Single Round Rolled Angle-Cut
• Tip Dimensions: 3.19 in. x 5 in.
• Pipe Diameter: 2.0 in.
• Material: High-Quality Stainless Steel
• Installation: Bolt-on (Axle-back)
• MPN: 11843

Fits select 2013-2015 Honda Accord coupe models (EX, EX-L, LX, Sport, and Touring) equipped with factory dual-exit exhaust systems.

The Borla 11840 S-Type Axle-Back exhaust system is engineered to replace the restrictive rear factory mufflers, improving exhaust velocity and unleashing a deeper, more aggressive tone without compromising daily drivability. Built from high-quality T-304 stainless steel, this system provides superior corrosion resistance compared to 400-series alternatives. Each unit features ultra-smooth mandrel-bent tubing and precision CNC manufacturing to ensure maximum flow and a direct-fit installation onto factory mounting points.

• Series: S-Type Axle-Back
• Material: Premium T-304 Stainless Steel
• Tip Finish: Polished T-304 Stainless
• Exit: Fits vehicles with factory split rear/dual exit only
• Design: Patented straight-through and multi-core technology
• Warranty: Million-Mile Warranty
• MPN: 11840

Note: This system is specifically designed for coupe models with dual-exit exhaust and is not compatible with single-exit configurations.

Fits 2013-2014 Ford Mustang GT and 2013 Ford Mustang Boss 302 (5.0L).

The Borla S-Type Axle-Back exhaust system (MPN 11837) is engineered to deliver the classic S-Type sound level for the Coyote 5.0L engine without introducing interior cabin drone. This rear-section system replaces the restrictive factory mufflers, utilizing 2.75-inch mandrel-bent tubing to optimize exhaust gas velocity and improve flow.

Constructed entirely from premium T-304 stainless steel, this system offers superior corrosion resistance and durability compared to standard 409 stainless steel. The assembly features dual 4.5-inch round bright chrome tips, providing a refined aesthetic to the single split rear exit. Borla uses patented straight-through and multi-core technology to reduce backpressure while maintaining the deep, aggressive tone respected by performance enthusiasts.

• System Type: Axle-Back (Rear Section)
• Tubing Diameter: 2.75-inch mandrel-bent
• Tip Specification: 4.5-inch round polished chrome T-304 stainless steel
• Exit Style: Single Split Rear Exit
• Sound Level: S-Type (Aggressive with no drone)
• Material: High-quality T-304 Stainless Steel
• Precision CNC manufactured for a direct-fit installation
• Manufacturer Part Number: 11837

The Borla Touring Series Cat-Back Exhaust system (MPN 11834BC) provides a mellow, refined sound profile for 2012-2018 Jeep Wrangler and Wrangler JK models without the intrusive cabin drone often found in aftermarket systems. Engineered for both 2-door and 4-door 4WD models equipped with the 3.6L engine, this system features a 2.5-inch inlet transitioning into dual 2-inch tailpipes.

Constructed from premium T-304 stainless steel for maximum corrosion resistance, this exhaust is superior to T-400 series alternatives. The system is finished with distinctive 3.5-inch x 3.28-inch square black chrome tips. Borla’s patented straight-through and multi-core technology increases exhaust velocity to improve efficiency and power. Each system utilizes ultra-smooth mandrel bends to ensure maximum flow and a precise fit using CNC manufacturing.

• Fits 2012-2018 Jeep Wrangler and Wrangler JK (3.6L V6) 2 and 4-Door models
• Touring Sound Level: Mellow tone with zero interior cabin drone
• Construction: High-quality T-304 stainless steel piping
• Piping Diameter: 2.5-inch main pipe into dual 2-inch tailpipes
• Tip Detail: Dual 3.5-inch x 3.28-inch square black chrome on T-304 stainless steel
• Installation: Uses factory mounting points for accurate fitment
• Manufacturer Part Number: 11834BC

Note: To maintain the black chrome finish, clean tips with hot water and a microfiber cloth only. Use of abrasive stainless steel polishes is not recommended for this specific finish.

Fits select 2012-2018 Jeep Wrangler and Wrangler JK models (3.6L) with automatic or manual transmissions and 4WD.

Enhance your Jeep's exhaust note without sacrificing cabin comfort with the Borla Touring Series axle-back exhaust system. Specifically engineered for the 3.6L Pentastar engine, this rear-section-only system delivers a mellow, refined sound profile designed to be drone-free during highway cruising and daily driving. Constructed from premium T-304 stainless steel, this system offers superior corrosion resistance and durability compared to standard 400-series steel.

The system features ultra-smooth mandrel-bent tubing to maintain maximum exhaust velocity and flow. It terminates in distinct dual 3.5-inch x 3.28-inch square bright chrome tips, providing a unique custom aesthetic for the rear of your Wrangler. Using precision CNC manufacturing, Borla ensures an accurate fit to factory mounting points for a straightforward installation.

• Part Number: 11834
• Series: Touring (Axle-Back/Rear Section Only)
• Material: T-304 Stainless Steel
• Tubing Diameter: 2.5-inch inlet into dual 2.0-inch outlets
• Tip Description: Dual 3.5-inch x 3.28-inch Square Bright Chrome
• Exit Configuration: Single Split Rear Exit
• Warranty: Manufacturer Million-Mile Warranty

Fits 2012-2015 Honda Civic models with the 1.8L engine, including DX, EX, EX-L, GX, HF, LX, Natural Gas, and SE trims.

The Borla S-Type Axle-Back exhaust system (part number 11828) is engineered to provide a significant acoustic and performance upgrade for the ninth-generation Honda Civic. This rear-section exhaust replaces the restrictive factory muffler with high-flow, mandrel-bent 2.25-inch T-304 stainless steel tubing. The S-Type muffler design is specifically tuned to deliver an aggressive, throaty exhaust note under acceleration while maintaining a drone-free experience inside the cabin during cruising.

Built for long-term durability, the system uses premium T-304 stainless steel, which offers superior corrosion resistance compared to 400-series or aluminized steel. The system is finished with a 4.25-inch x 3.5-inch oval polished tip for a refined, custom appearance. As a direct-fit component, it utilizes factory mounting points for a precise, bolt-on installation.

• Series: S-Type
• Tubing Diameter: 2.25-inch
• Tip Dimensions: 4.25" x 3.5" Oval Polished T-304 Stainless Steel
• Construction: CNC Mandrel-Bent Tubing
• Material: T-304 Stainless Steel
• Fitment Type: Axle-Back (Rear Section Only)
• Warranty: Borla Million-Mile Warranty
• Manufacturer Part Number: 11828

Fits 2011-2014 Cadillac CTS Base, Performance, and Premium models (V6-3.6L).

This Borla Touring Series rear section exhaust is engineered to improve exhaust velocity and efficiency for the 3.6L Cadillac CTS. Utilizing Borla's patented straight-through and multi-core technology, this system provides a refined, deep exhaust note without sacrificing performance. Note that this is a rear section only and does not include exhaust tips; it is designed to be used with your vehicle's factory bezel, valance, and tips.

Every system is manufactured using premium T-304 stainless steel, offering superior corrosion resistance and durability compared to standard 400-series steel. Precision computer-controlled CNC manufacturing and mandrel bends ensure an accurate fit and maximum flow.

• System Type: Rear Section Only
• Series: Touring
• Material: T-304 Stainless Steel
• Exit Style: Dual Center Rear Exit
• Tubing Diameter: Mandrel-bent
• Manufacturer Part Number: 11824
• Warranty: Million-Mile Warranty

Fits select 2011-2015 Cadillac CTS V Coupe (6.2L V8).

This Borla S-Type rear section axle-back exhaust system is engineered to replace the restrictive factory mufflers, providing an aggressive sound profile and improved exhaust flow. Built specifically for the 6.2L Cadillac CTS V, this system utilizes Borla’s patented straight-through and multi-core technology to increase exhaust velocity. The entire system is manufactured from high-grade T-304 stainless steel, offering superior corrosion resistance and durability compared to standard 400-series stainless steel components.

Each unit features ultra-smooth mandrel bends for maximum flow and is built using precision computer-controlled CNC manufacturing to ensure a perfect bolt-on fit to factory mounting points. The system is finished with polished T-304 stainless steel tips for a premium look that matches the vehicle's performance.

• System Type: Rear Section / Axle-Back
• Material: T-304 Stainless Steel
• Muffler Series: S-Type
• Tip Material: Polished T-304 Stainless Steel
• Bends: Ultra-smooth mandrel bends
• Manufacturing: CNC-machined for precise fit
• Manufacturer Part Number: 11823
• Warranty: Million-Mile Warranty

Fits 2012-2017 Hyundai Veloster (1.6L) Base, RE:FLEX, Turbo, Turbo R-Spec, and Value Edition models. This Borla rear section (axle-back) exhaust system is engineered to improve exhaust velocity and flow for a more responsive driving experience.

Constructed from premium T-304 stainless steel, this system provides superior corrosion resistance and durability compared to standard 409-grade alternatives. The 2.25-inch mandrel-bent tubing ensures smooth exhaust flow, eliminating the restrictions found in factory piping. Note: This specific system (MPN 11821) does not include exhaust tips and is designed to integrate seamlessly with your vehicle's factory bezel, valance, or existing tips.

• Replaces factory rear section muffler assembly
• 2.25-inch diameter T-304 stainless steel construction
• Ultra-smooth CNC mandrel bends for maximum flow
• Straight-through and multi-core technology for a signature exhaust note
• Designed for 1.6L FWD 2-door models with AT or MT transmissions
• Borla Million-Mile Warranty

Fits 2005-2008 Chevrolet Corvette Base models (6.0L / 6.2L).

The Borla S-Type II rear section exhaust system (MPN 11815) is engineered to deliver an aggressive tone while specifically eliminating the low-frequency resonance and drone often found in performance setups. This axle-back system features a 2.5-inch diameter inlet that transitions into a dual 2-inch configuration, providing a direct fit for vehicles with or without the factory NPP exhaust option.

Constructed entirely from premium T-304 austenitic stainless steel, the assembly features ultra-smooth mandrel bends for maximum flow and precision CNC manufacturing for an exact fit. The system is finished with quad 4-inch round polished T-304 stainless steel tips for a refined aesthetic. Please note that while this system fits NPP-equipped cars, it does not include or utilize NPP valves.

• System Type: Rear Section / Axle-Back
• Sound Level: S-Type II (Aggressive tone, no drone)
• Material: T-304 Stainless Steel
• Piping Diameter: 2.5" into dual 2"
• Tip Size: Quad 4" Polished Round Tips
• MPN: 11815
• Warranty: Million-Mile Warranty

Fits 2005-2008 Chevrolet Corvette Base models (6.0L / 6.2L).

The Borla 11814 Touring Series axle-back exhaust system offers a refined, deep tone designed for the C6 owner who wants an upgraded acoustic profile without excessive volume. This rear-section-only system uses patented straight-through and multi-core technology to increase exhaust velocity, improving efficiency and unleashing the characteristic V8 sound. Each system is manufactured using premium T-304 stainless steel, providing significantly better corrosion resistance than 400-series alternatives.

Built with ultra-smooth mandrel-bent tubing and precision CNC manufacturing, this exhaust ensures an accurate fit and maximum flow. The system terminates in quadruple 4-inch polished T-304 stainless steel tips for a distinct high-performance appearance. It is compatible with both NPP (dual-mode) and non-NPP vehicles, though it does not include or utilize NPP valves.

• T-304 stainless steel construction for maximum durability
• Quad 4-inch polished stainless steel tips
• Direct bolt-on fitment to factory mounting points
• Mandrel-bent tubing eliminates flow restrictions
• Borla Million-Mile Warranty
• Manufacturer Part Number: 11814

Fits 2011-2016 Scion tC Base models (2.5L). This Borla rear section exhaust system is engineered as a direct bolt-on upgrade to improve the sound and durability of your Scion tC. By replacing the restrictive factory rear muffler, this system connects directly to the OEM mid-pipe for a seamless fitment that maintains factory mounting locations.

Constructed from premium austenitic stainless steel, the Borla 11813 offers significantly higher corrosion resistance than 409-grade or aluminized steel alternatives, ensuring long-term performance in harsh weather conditions. The free-flow design utilizes Borla's patented technology to optimize exhaust gas velocity and provide the signature "sound of power" without the drone associated with lower-quality systems.

• Material: High-quality austenitic stainless steel construction
• Installation: Bolt-on design; attaches to factory mid-pipe
• Finish: Includes handsome polished stainless steel Borla tips
• Manufacturer Part Number: 11813
• Warranty: Manufacturer million-mile warranty

Fits 2009-2013 Chevrolet Corvette Base, Grand Sport, and ZR1 models (6.2L).

The Borla S-Type II axle-back exhaust system is engineered to provide a deep, aggressive exhaust note for the C6 Corvette while specifically targeting and eliminating the resonance or drone often associated with aftermarket systems. This rear section replacement utilizes Borla's patented straight-through technology to maximize exhaust velocity and flow without the restriction of factory baffles. Built from premium T-304 austenitic stainless steel, this system offers superior durability and corrosion resistance compared to T-400 series alternatives.

Designed for a precise fit, the system features ultra-smooth mandrel-bent tubing and exits through quad 4-inch polished round tips. This kit is compatible with both NPP (dual-mode) and non-NPP equipped Corvettes; please note that the system does not include or utilize integrated NPP valves. Every system is manufactured using CNC technology for consistent fitment and is backed by a Million-Mile Warranty.

• Series: S-Type II
• Configuration: Rear Section / Axle-Back
• Inlet Diameter: 2.5-inch
• Outlet Diameter: Dual 2-inch
• Tip Description: Quad 4-inch round polished T-304 stainless steel
• Material: T-304 Stainless Steel
• Fitment Note: Fits vehicles with or without NPP valves (valves not included)
• Manufacturer Part Number: 11811

Fits 2011-2016 Mini Cooper Countryman Base, S, S ALL4, and John Cooper Works ALL4 (1.6L).

This Borla rear section exhaust (MPN: 11804) is engineered to optimize exhaust velocity and flow. Constructed from premium, aircraft-grade T-304 stainless steel—superior to 400-series alternatives—this system features mirror-polished tips and ultra-smooth mandrel bends. Utilizing Borla’s patented straight-through and multi-core technology, it provides a distinctive acoustic profile and increased durability. Precision computer-controlled CNC manufacturing ensures an accurate fit to the factory mounting points.

• Premium T-304 stainless steel construction for maximum corrosion resistance
• Ultra-smooth mandrel bends ensure maximum flow and power
• Mirror-polished stainless steel tips for a high-end finish
• Precision CNC manufactured for a direct-fit installation
• Manufacturer Part Number: 11804
• Backed by Borla's Million-Mile Warranty