Fits 2010-2013 Chevrolet Camaro SS and ZL1 (6.2L) equipped with the factory Ground Effects Package (GFX).

The Borla S-Type axle-back exhaust (rear section only) is engineered to deliver the iconic "Borla Sound of Power"—an aggressive, throaty note that remains refined during cruise. This system uses patented straight-through and multi-core technology to optimize exhaust velocity and flow. Built from premium T-304 stainless steel, this system is highly resistant to corrosion and far superior to 400-series or aluminized alternatives.

Each unit features ultra-smooth mandrel-bent tubing to eliminate restrictions and is manufactured using precision CNC technology for a perfect bolt-on fit. This specific configuration is designed for vehicles with the GFX package; it does not include tips, as it is intended for use with your factory tips and valance. For those looking to upgrade to a full cat-back system, this rear section can be paired with Borla X-Pipe 60512.

• System Type: Axle-Back (Rear Section Only)
• Series: S-Type
• Material: T-304 Stainless Steel
• Fitment: Fits vehicles with Ground Effects Package (GFX)
• Exit: Reuses factory tips and valance
• Manufacturer Part Number: 11801
• Warranty: Borla Million-Mile Warranty

Fits 2011-2014 Ford Mustang Base Coupe and Convertible models.

The Borla S-Type axle-back exhaust system is engineered to deliver a significant increase in exhaust velocity and the aggressive, throaty "S-Type" sound profile. This rear-section system replaces the factory mufflers to improve flow and performance, utilizing patented straight-through and multi-core technology to reduce backpressure.

Constructed from premium T-304 stainless steel, this system is highly resistant to corrosion and superior in durability to T-400 series alternatives. Each unit features ultra-smooth mandrel bends for maximum exhaust flow and precision computer-controlled CNC manufacturing to ensure an accurate, bolt-on fit to your Mustang's factory points. The system is finished with bright chrome-plated T-304 stainless steel tips for a high-performance appearance that lasts.

• Product Line: S-Type
• Configuration: Axle-Back (Rear Section Only)
• Fits: 2011-2014 Ford Mustang Base (Coupe and Convertible)
• Material: High-quality T-304 Stainless Steel
• Finish: Bright Chrome Tips
• Construction: CNC Mandrel Bends
• Warranty: Million-Mile Warranty
• Manufacturer Part Number: 11796

Fits 2009-2013 Toyota Corolla Base, L, LE, S, XLE, and XRS models equipped with 1.8L or 2.4L engines.

Upgrade your vehicle's exhaust profile with the Borla Rear Section exhaust system. This system is engineered as a direct bolt-on for the factory mid-pipe, providing an efficient way to enhance your Toyota Corolla's sound and exhaust flow without requiring a complete cat-back replacement. Built for longevity in harsh environments, it utilizes high-quality materials to resist corrosion and weather-related wear.

• Precision Fitment: Specifically designed to connect to the factory mid-pipe for a seamless installation.
• Premium Materials: Manufactured from high-quality austenitic stainless steel, offering durability superior to 409 or aluminized steel.
• Finish: Includes handsome polished stainless steel BORLA tips.
• Performance: Utilizes patented race-winning technology to optimize flow and deliver the signature BORLA sound of power.
• Warranty: Backed by a manufacturer million-mile written warranty.
• Part Number: 11795

Fits 2011-2012 Ford Mustang GT and 2012 Ford Mustang Boss 302 (5.0L).

The Borla S-Type Axle-Back exhaust system is engineered to provide a significant upgrade in exhaust note and flow for the 5.0L Coyote engine. This rear-section system utilizes Borla's patented straight-through and multi-core technology to increase exhaust velocity, providing the classic aggressive "Sound of Power" respected by enthusiasts. Built entirely from premium T-304 stainless steel, this system offers superior durability and corrosion resistance compared to 400-series stainless steel alternatives.

Every Borla system features ultra-smooth mandrel-bent tubing to eliminate flow restrictions and precision CNC manufacturing to ensure an accurate bolt-on fit to your factory mounting points. The system is finished with bright chrome T-304 stainless steel tips for a high-end aesthetic that lasts.

• System Type: Axle-Back (Rear Section Only)
• Material: Premium T-304 Stainless Steel
• Tip Finish: Bright Chrome on T-304 Stainless Steel
• Mandrel-bent tubing for maximum flow and power
• Patented straight-through technology reduces backpressure
• Direct bolt-on installation using factory hangers
• Manufacturer Part Number: 11789
• Million-Mile Warranty

Fits 2010-2013 Mazda 3 and Mazdaspeed 3 Hatchback models (2.3L / 2.5L) with manual transmission.

Upgrade your Mazda's exhaust note and flow with this Borla rear section (axle-back) exhaust system. Constructed from premium austenitic stainless steel—a material superior to 409 or aluminized steel—this system is built to withstand severe weather and road elements while providing a free-flowing path for exhaust gases. This bolt-on kit connects directly to the factory mid-pipe, making it a straightforward installation that utilizes original mounting points.

Designed specifically for the hatchback chassis, this system includes polished stainless steel tips and delivers Borla's signature performance sound. By reducing weight and improving exhaust velocity, this rear section offers a durable solution for enthusiasts looking to enhance their daily driver or spirited street car.

• Fabricated from high-quality austenitic stainless steel for maximum corrosion resistance
• Engineered as a direct bolt-on for easy installation
• Tuned specifically for Mazda 3 2.3L Turbo and 2.5L engines
• Includes polished BORLA stainless steel tips
• Backed by a Million-Mile Warranty
• Manufacturer Part Number: 11786

Fits 1997-2011 Mitsubishi Lancer (DE, ES, GTS, Sportback) and Subaru Legacy GT.

The Borla 11782 rear-section axle-back exhaust system is engineered to replace the restrictive factory muffler with high-quality T-304 stainless steel. Featuring Borla's patented straight-through and multi-core technology, this system is designed to increase exhaust velocity for improved throttle response and a more aggressive tone. Unlike T-400 series alternatives, the austenitic T-304 construction provides maximum resistance to corrosion and scaling, ensuring the system maintains its integrity and appearance over time.

• High-Flow Design: Ultra-smooth computer-controlled CNC mandrel bends ensure consistent pipe diameter to maximize flow and reduce backpressure.
• Premium Materials: Constructed from aircraft-grade T-304 stainless steel for superior durability compared to standard 409 stainless steel.
• Polished Finish: Equipped with a mirror-polished T-304 stainless steel tip for a sharp, refined aesthetic.
• Precision Fit: Designed to bolt directly to the factory mounting points for a straightforward installation.
• Manufacturer Part Number: 11782
• Warranty: Covered by the Borla Million-Mile Warranty.

Fits 2010 Ford Mustang GT (4.6L).

The Borla S-Type axle-back exhaust system (PN 11777) is engineered for 2010 Mustang GT owners seeking an aggressive "pony car" growl without the intrusive cabin drone found in lesser systems. This rear-section exhaust replaces the factory mufflers to provide an immediate improvement in both auditory character and exhaust flow. Tuned specifically for the 4.6L V8, the S-Type sound level offers a deep, muscle-car tone that remains civilized during cruising and wide-open throttle.

Constructed from premium austenitic T-304 stainless steel, this system is built to withstand harsh environments while maintaining its finish. The 2.5-inch mandrel-bent tubing ensures maximum exhaust velocity, while the dual 4-inch mirror-polished tips provide a significant visual upgrade over the stock hardware. As a direct bolt-on system, it mounts to factory points for a precise fit.

• System Type: Axle-Back (Rear Section Only)
• Series: S-Type
• Tubing Diameter: 2.5" Mandrel-Bent
• Tip Specification: 4" Round Angle-Cut Rolled Edge (12" long)
• Tip Finish: Mirror Polished Bright Chrome on T-304 Stainless
• Material: Austenitic T-304 Stainless Steel
• Performance: No-Drone Guarantee
• Manufacturer Part Number: 11777
• Warranty: Million Mile Warranty

Fits 2010-2013 Chevrolet Camaro LS and LT models equipped with the 3.6L V6 engine. This system is not compatible with 2013 RS models featuring the factory quad-tip Dual-Mode Exhaust.

Enhance the presence and performance of your 3.6L Camaro with the Borla Axle-Back exhaust system (MPN 11776). This rear-section-only system replaces the restrictive factory mufflers to provide a more aggressive acoustic profile and improved exhaust flow. Engineered from premium T-304 austenitic stainless steel, this system provides superior durability and corrosion resistance compared to lower-grade 400-series or aluminized steel alternatives.

By utilizing precision CNC manufacturing and high-quality materials, Borla allows drivers to shed significant weight over the stock exhaust assembly—improving overall vehicle dynamics. Each kit features mirror-polished T-304 stainless steel tips for a refined, race-inspired look that fits the factory rear valence.

• Direct-fit axle-back design bolts to factory mounting points
• Constructed from durable T-304 austenitic stainless steel
• Mirror-polished T-304 stainless steel exhaust tips included
• Noticeable weight savings compared to the heavy OE muffler assembly
• Engineered for improved flow and a deeper exhaust note
• Manufacturer Part Number: 11776
• Backed by Borla's Million-Mile Warranty

Fits 2010-2013 Chevrolet Camaro SS and ZL1 models (6.2L). Note: This system is designed specifically for vehicles WITHOUT the factory Ground Effects Package (GFX).

The Borla Touring Series Axle-Back exhaust system (PN 11774) provides a refined, subdued exhaust note for Camaro owners who want a performance upgrade with a stealth-like growl. Constructed from premium T-304 stainless steel, this rear-section exhaust was developed through direct R&D collaboration with GM to ensure precise fitment and optimized flow without the aggressive volume of the S-Type series.

• High-Quality Materials: Mandrel-bent T-304 stainless steel tubing for maximum durability and corrosion resistance.
• Touring Sound Profile: Engineered for a smooth, deep tone that remains quiet during cruising while delivering a performance bark under load.
• Mirror-Polished Tips: Features dual T-304 stainless steel tips for an enhanced rear-end appearance.
• Direct Replacement: This axle-back system replaces the factory rear mufflers and provides significant weight savings over the stock assembly.
• Modular Compatibility: Can be converted into a full Cat-Back system by adding the Borla X-Pipe and Mid-Pipes (PN 60512).

Each system is built with Borla's patented "power when you want it, fuel economy when you need it" technology and includes a Million-Mile Warranty. Manufacturer Part Number: 11774.

Fits 2005-2009 Ford Mustang GT, Shelby GT500, and Shelby GT500KR (4.6L).

The Borla Touring Series Axle-Back exhaust system (MPN 11752) provides a deep, refined tone and increased exhaust flow for S197-generation Mustangs. Designed as a direct bolt-on to the factory mounting points, this rear-section-only system replaces restrictive stock mufflers with Borla's high-flow Touring mufflers, canceling high-frequency sound waves to ensure a mellow sound with no interior cabin drone.

Constructed from premium 2.5-inch mandrel-bent T-304 stainless steel, this system is significantly lighter than the factory assembly and offers superior corrosion resistance. The setup is finished with dual 4-inch round bright chrome-on-stainless steel tips, providing an aggressive yet clean performance look. All Borla exhaust products are tuned to maximize output, making this an ideal foundation for additional engine performance upgrades.

• System Type: Axle-Back (Rear Section Only)
• Muffler Series: Touring (Low Noise / No Drone)
• Tubing Diameter: 2.5 inches
• Tip Specification: 4-inch Round Bright Chrome T-304 Stainless
• Material: T-304 Stainless Steel
• Fitment Type: Direct Bolt-On
• Manufacturer Part Number: 11752

Fits 2005-2009 Ford Mustang Base (4.0L / V6-4.0L).

Improve the exhaust flow and acoustic profile of your 4.0L Mustang with this Borla Axle-Back exhaust system. Engineered as a direct bolt-on upgrade, this rear-section-only system replaces the restrictive factory muffler to provide a significant increase in airflow and a deeper, more aggressive tone without the weight of the OEM components. Constructed from aircraft-grade T-304 stainless steel, it is designed to withstand corrosion and heat while delivering long-term performance gains.

This system utilizes 2.5-inch CNC mandrel-bent tubing to maintain consistent diameters through every bend, eliminating backpressure. Testing shows an impressive flow rate of 724cfm, a 346cfm increase over the stock unit. The exhaust exits through a large 4-inch round, rolled, angle-cut tip featuring an embossed Borla logo and a bright chrome finish. At approximately one-third lighter than the factory system, this upgrade offers a tangible improvement in power-to-weight ratio and fuel efficiency.

• Material: High-quality T-304 stainless steel construction
• Tubing Diameter: 2.5-inch CNC mandrel-bent piping
• Tip Specification: 4-inch round, rolled, angle-cut embossed chrome tip
• Flow Rating: 724cfm (346cfm increase over stock)
• Installation: Easy bolt-on design to factory mounting points
• Manufacturer Part Number: 11751
• Warranty: Million-Mile Warranty

Fits select 2005-2009 Ford Mustang GT, Shelby GT500, and Shelby GT500KR (4.6L).

The Borla 11750 S-Type Axle-Back exhaust system is a direct-fit performance upgrade designed to deliver an aggressive sound profile without the intrusive interior drone. This system replaces the factory rear muffler section, reducing overall vehicle weight while significantly increasing exhaust flow CFM. Engineered for the 2005-2009 Mustang platform, the S-Type mufflers cancel out high-frequency sound waves to provide a deep, throaty V8 growl that complements both stock and modified engines.

Each system is built from high-quality T-304 stainless steel and features 2.5-inch mandrel-bent tubing for maximum airflow. The exhaust exits through dual 4-inch round, bright chrome-finished tips that are welded to the muffler assemblies. This axle-back kit bolts directly to the factory mounting points, making it an ideal modification for owners seeking better performance and a premium finish.

• System Type: Axle-Back (Rear Section Only)
• Muffler Series: S-Type (Aggressive Sound)
• Tubing Diameter: 2.5"
• Tip Size: 4" Round, Bright Chrome Finish
• Material: T-304 Stainless Steel
• Installation: Bolt-on to factory mounting points
• Manufacturer Part Number: 11750

Fits 2005-2008 Chevrolet Corvette Base (6.0L / 6.2L).

Upgrade your C6's acoustic profile with the Borla S-Type axle-back exhaust system. This rear-section-only kit replaces the factory mufflers with Borla's signature S-Type straight-through design, delivering a more aggressive, throatier exhaust note that characterizes the 6.0L LS2 and 6.2L LS3 V8 engines. Engineered for high-flow efficiency, this system utilizes patented technology to improve exhaust velocity while maintaining a refined cabin experience.

The 11744 system is built from premium T-304 austenitic stainless steel, providing superior corrosion resistance compared to 409 or aluminized steel. It features precision-bent tubing and mirror-polished T-304 stainless steel tips. This system is compatible with both NPP (Dual Mode) and non-NPP equipped Corvettes; however, please note that the Borla unit does not include or utilize NPP valves.

• System Type: Axle-Back (Rear Section Only)
• Series: S-Type Classic
• Material: T-304 Stainless Steel
• Fitment: Fits both NPP and non-NPP vehicles (valves not included)
• Installation: Bolt-on replacement for factory rear section
• Manufacturer Part Number: 11744
• Warranty: Million-Mile Limited Warranty

Fits 2005-2010 Scion tC (Base and Spec models).

The Borla 11743 rear section exhaust muffler is engineered to improve the exhaust flow and sound profile of your Scion tC. This system replaces the restrictive factory rear muffler, connecting directly to the OEM mid-pipe mounting points for a straightforward bolt-on installation. Unlike 409 or aluminized steel alternatives, this unit is constructed from premium T-304 austenitic stainless steel for maximum corrosion resistance and long-term durability in severe weather conditions.

• Direct bolt-on installation to factory mid-pipe
• Manufactured from high-quality T-304 austenitic stainless steel
• Polished stainless steel tip for an upgraded appearance
• Precision-engineered for weight reduction and optimized flow
• Manufacturer Part Number: 11743
• Backed by Borla's Million-Mile Warranty

Fits 1999-2005 Mazda Miata (Base, LS, SE, 10th Anniversary, Shinsen, and Mazdaspeed models).

The Borla 11732 rear section exhaust is engineered to enhance the exhaust flow and acoustic profile of the NB-generation Mazda Miata. Replacing the restrictive factory rear muffler, this bolt-on system is designed for enthusiasts seeking improved durability and a more aggressive tone without the drone associated with lower-quality exhausts.

• Premium Materials: Constructed from high-quality austenitic stainless steel for superior corrosion resistance compared to 409-grade or aluminized steel.
• Free-Flow Design: Utilizes Borla's patented technology to optimize exhaust velocity and improve performance through a more efficient flow path.
• Direct Bolt-On: Precision-manufactured to connect to the factory mid-pipe for a straightforward installation that requires no cutting or welding.
• Polished Finish: Features handsome polished stainless steel tips for a refined, performance-oriented aesthetic.
• Part Number: 11732
• Manufacturer Warranty: Supported by Borla’s million-mile warranty.

Fits 2010-2015 Chevrolet Camaro SS and ZL1 models (6.2L LS3 & L99 Coupe). This BBK Vari-Tune axle-back exhaust system provides a direct-fit solution to replace restrictive factory mufflers, giving you the ability to customize your vehicle's acoustic profile and power delivery.

The centerpiece of this kit is the patented Vari-Tune adjustable power valve. By simply adjusting the valve at the rear of the muffler with a wrench, you can manipulate exhaust flow through the chambers to change the sound level by 8-10 decibels. Once you find the preferred tone, the setting is secured with the included locking nut. This mechanical adjustment also helps optimize backpressure, yielding gains of 10-15 horsepower.

• Construction: Durable 439 stainless steel tubing and muffler bodies for long-term corrosion resistance.
• Adjustability: Patented stainless steel internal power valves for sound and performance tuning.
• Tips: Dual 4-inch brushed stainless steel tips featuring laser-etched BBK logos.
• Installation: Direct bolt-on replacement for factory exhaust; no welding required.
• Specifications: 2-3/4 inch mandrel-bent piping for maximum flow.
• Manufacturing: Proudly made in the USA.

Includes two Vari-Tune mufflers, over-axle pipes, 4-inch tips, and all necessary hardware for a complete installation (MPN: 41065).

Fits 2020-2025 BMW X3 M, X3 M Competition, X4 M, and X4 M Competition (S58 engine).

The AWE SwitchPath Axle-Back Exhaust provides a sophisticated, dual-personality exhaust note for the BMW F97 X3 M and F98 X4 M. Engineered with AWE’s patented 180 Technology®, this system uses internal drone-canceling resonators to eliminate cabin frequencies while maintaining a clean, aggressive tone under acceleration. The SwitchPath muffler integrates directly with the factory valve actuators, allowing you to retain all original drive-mode functionality without needing additional wiring or extension harnesses.

Built for maximum durability and flow, the system is handcrafted from 3-inch U.S.-sourced T304L stainless steel with a straight-through design. It features quad 114.3mm (4.5-inch) double-walled, slash-cut tips in a Diamond Black finish. The modular design ensures compatibility with both the factory mid-pipes and AWE’s Performance Mid-Pipes, provided the OEM break point is maintained.

• U.S.-sourced 3-inch T304L stainless steel construction
• Patented 180 Technology® drone-canceling resonators
• Retains factory valve behavior using OEM valve motors
• Quad 4.5-inch double-walled slash-cut tips in Diamond Black
• Straight-through design for optimized exhaust flow
• Handcrafted in-house at AWE
• 50-state emissions-compliant
• AWE Perfect Fitment Guarantee and No CEL Guarantee
• AWE Lifetime Warranty
• Manufacturer Part Number: 3025-43301

Fits 2023-2026 Chevrolet Corvette Z06 (5.5L).

The AWE SwitchPath Exhaust System provides a dual-tone solution for the C8 Z06, utilizing specifically tuned straight-through mufflers and a precision-engineered X-pipe to enhance the 5.5L flat-plane crank V8. This system retains full integration with factory valve controls, allowing for a comfortable cruise or an aggressive, high-revving soundtrack without requiring a dealer valve relearn. The kit includes machined aluminum brackets to isolate factory valve motors from exhaust heat, ensuring long-term electronic reliability.

Constructed from 3-inch CNC mandrel-bent U.S.-sourced T304L stainless steel with 0.065-inch wall thickness, this system reduces vehicle weight by 15 lbs compared to the factory unit. Two integrated aluminum heat shields bolt directly to the factory mounting points to protect the rear bumper mesh and internal components. Topped with quad 4.5-inch double-walled slash-cut tips in Chrome Silver, this bolt-on system is designed for a perfect fit without cutting or emissions interference.

• Max gains of +11 hp and +14 lb-ft of torque at the wheels
• SwitchPath system weighs 42.5 lbs (15 lbs lighter than the 57.5 lb stock exhaust)
• Retains all factory onboard drive mode exhaust controls
• Internally-lined stainless flex sections to isolate engine movement
• CNC-machined aluminum heat shields protect bumper internals
• AWE No CEL Guarantee and Lifetime Warranty
• Direct bolt-on installation with no cutting required
• Manufacturer Part Number: 3025-42906

Fits 2022-2025 Subaru WRX Base, GT, Limited, Premium, TR, and TS models.

The AWE Track Edition Axle-Back Exhaust is engineered for enthusiasts who want an unfiltered, aggressive Boxer soundtrack. This system replaces the restrictive factory rear mufflers with straight lengths of 2.5-inch T304L stainless steel, resulting in a rowdy exhaust note both inside and outside the cabin. By removing the bulky OE units, the Track Edition drops the exhaust weight from 26 lbs to just 12 lbs, improving both performance and handling.

Handcrafted in the USA from CNC mandrel-bent U.S.-sourced 0.065-inch wall tubing, this axle-back system is a direct bolt-on for factory-like simplicity. It mates directly to the existing flanges on the factory mid-pipe and includes new gaskets for a leak-free seal. The system is topped off with quad 4-inch double-walled, slash-cut tips in a durable Diamond Black finish.

• Construction: Handcrafted CNC mandrel-bent 2.5-inch U.S.-sourced T304L stainless steel
• Tip Specification: Quad 4-inch double-walled, slash-cut Diamond Black tips
• Weight Reduction: Weighs 12 lbs (replaces 26 lb factory axle-back)
• Design: Straight-through Track Edition for maximum flow and volume
• Installation: Direct bolt-on to factory mid-pipe; all gaskets included
• Compliance: 50-state emissions legal
• Guarantee: AWE No Check Engine Light Guarantee and Lifetime Warranty
• Manufacturer Part Number: 3020-43424

Fits 2016-2024 Chevrolet Camaro SS, ZL1, and LT1 (V8-6.2L).

The AWE Track Edition Axle-Back Exhaust provides the most aggressive acoustic profile for the Gen6 Camaro by replacing the heavy factory rear mufflers with non-baffled, straight-through pipes. This system retains the factory mid-section, making it an efficient solution for drivers seeking maximum sound volume and weight reduction. Handcrafted in the USA, this exhaust is designed for high-performance applications where a raw, unfiltered V8 tone is the priority.

• CNC mandrel-bent 3-inch U.S.-sourced .065-inch wall T304L stainless steel construction.
• Straight-through, non-baffled design for maximum exhaust flow and performance.
• 4.5-inch double-walled, slash-cut tips featuring the AWE logo.
• Diamond Black finish on tips with individual adjustability for custom bumper fitment.
• Engineered and manufactured in-house at AWE.
• Guaranteed No Check Engine Light (CEL) and Perfect Fitment.
• AWE Lifetime Exhaust Warranty included.
• Manufacturer Part Number: 3020-43075

Fits 2015-2018 Porsche Macan S, GTS, and Turbo models.

The AWE Track Edition Exhaust is engineered for drivers seeking a raw, aggressive soundtrack for their Macan. This axle-back system features an uninterrupted straight-through design that provides a pronounced mid-range tone specifically tuned to complement the lightning-fast shifts of the Porsche seven-speed PDK transmission. It delivers dyno-verified maximum gains of 15 HP and 31 lb-ft of torque at the crank.

Constructed from 2.5-inch CNC mandrel-bent, U.S.-sourced T304 stainless steel, the system is finished with quad 102mm slash-cut tips. These double-walled tips feature a Diamond Black finish to maintain a mirror-like appearance even under track conditions. Each tip is individually adjustable, allowing you to set the depth into the rear bumper to your personal preference.

• Dyno-verified gains of +15 HP and +31 lb-ft of torque at the crank
• Crafted from 2.5-inch CNC mandrel-bent T304 stainless steel
• Straight-through axle-back design for maximum sound profile
• Quad 102mm slash-cut Diamond Black adjustable tips
• No CEL Guarantee and Fitment Guarantee
• Lifetime Exhaust Warranty
• Manufacturer Part Number: 3020-43040

Note: Vehicles equipped with the Porsche Sport Exhaust (PSE) require AWE Valve Simulators (part number 1310-11018, sold separately). Due to the aggressive nature of the Track Edition, it cannot be returned for sound preference; however, it can be converted to the Touring Edition using an AWE Conversion Kit.

Fits 2022-2025 Subaru WRX (Base, GT, Limited, Premium, TR, and TS).

The AWE Track Edition Axle-Back Exhaust is engineered for VB WRX owners who want a raw, unfiltered Boxer engine note. By replacing the heavy factory mufflers with straight-through 2.5-inch T304L stainless steel piping, this system provides a rowdy, aggressive soundtrack both inside and out of the cabin. This lightweight design sheds 14 lbs compared to the OEM equipment, offering a high-flow, performance-oriented solution.

This axle-back system is handcrafted from CNC mandrel-bent, U.S.-sourced .065-inch wall T304L stainless steel. It is a direct bolt-on replacement that mates to the existing flanges on the factory midpipe and includes quad 4-inch double-walled, slash-cut tips in a chrome silver finish. Each system includes new gaskets for a perfect, leak-free fitment.

• Straight-through design maximizes exhaust flow and volume
• Handcrafted from 2.5-inch U.S.-sourced T304L stainless steel
• Weight: 12 lbs (Track Edition) vs. 26 lbs (Stock)
• Quad 4-inch double-walled slash-cut tips in chrome silver
• AWE No Check Engine Light Guarantee
• 50-state emissions legal
• Direct bolt-on installation with included gaskets
• Lifetime warranty
• Manufacturer Part Number: 3020-42424

Fits 2016-2024 Chevrolet Camaro LT1, SS, and ZL1 models.

The AWE Track Edition Axle-Back Exhaust is the most aggressive exhaust configuration in the AWE lineup for the Gen6 Camaro. This system replaces the factory rear muffler sections with straight-through, non-baffled pipes to maximize exhaust volume and flow while retaining the OEM mid-section. Engineered for those seeking a raw, high-performance sound profile, this axle-back system is a direct-bolt-on solution that provides significant weight savings over the stock components.

• Handcrafted from 3-inch U.S.-sourced CNC mandrel-bent .065-inch wall T304L stainless steel
• Clean, straight-through design for maximum performance and exhaust flow
• Quad 4.5-inch double-walled, slash-cut tips in Chrome Silver
• Individually adjustable tips allow for custom depth into the rear bumper
• Guaranteed No Check Engine Light
• Engineered, designed, and manufactured in-house at AWE
• Manufacturer Part Number: 3020-42067
• AWE Lifetime Exhaust Warranty included

Fits 2019-2024 BMW 330i and 330i xDrive (Base), and 2021-2024 BMW 430i and 430i xDrive (Base).

The AWE Tuning Track Edition Axle-Back Exhaust is engineered for the G2X owner who wants an unfiltered, aggressive soundtrack from the B48 engine. This system picks up after the secondary catalyst, utilizing CNC mandrel-bent 3-inch U.S.-sourced .065-inch wall T304L stainless steel. By removing the rear muffler section in favor of a straight-through design, this exhaust maximizes weight savings and provides a raw, high-volume exhaust note while remaining 50-state emissions legal.

Installation is straightforward, requiring a single cut at the factory-marked point. The included AWE Valve Simulator Brackets ensure no error codes are triggered when the factory valves are disconnected, and the AWE No CEL (Check Engine Light) Guarantee provides peace of mind. The system is finished with dual 4.5-inch slash-cut tips in Diamond Black for a premium aesthetic.

• CNC mandrel-bent 3-inch T304L stainless steel construction
• Dual 4.5-inch slash-cut tips in Diamond Black
• Straight-through design for maximum weight savings and volume
• Includes AWE Valve Simulator Brackets to prevent electronic errors
• No CEL Guarantee and 50-state emissions legal
• Included OEM sleeve clamp for easy conversion back to stock
• Manufacturer Part Number: 3020-33429
• Lifetime Warranty

Fits 2019-2024 BMW 330i/330i xDrive and 2021-2024 BMW 430i/430i xDrive (G2X Base models).

The AWE Track Edition Axle-Back Exhaust is engineered for G2X BMW owners seeking a raw, uncensored exhaust note. By utilizing a straight-through 3-inch design from the rear axle to the tips, this system removes the factory muffler to maximize volume and reduce weight. Crafted from CNC mandrel-bent 0.065-inch wall T304L stainless steel, it provides a direct, high-flow path for the B48 engine while remaining 50-state emissions legal.

Installation is straightforward, requiring a single cut at the factory-marked location. AWE includes a high-quality OEM-style sleeve clamp to allow for an easy return to the stock configuration if necessary. To ensure seamless electronics integration, this kit includes AWE Valve Simulator Brackets to prevent fault codes after removing the factory exhaust valves. The system is finished with dual 4.5-inch slash-cut tips in Chrome Silver for an aggressive rear profile.

• CNC mandrel-bent 3-inch U.S.-sourced T304L stainless steel
• Dual 4.5-inch slash-cut tips in Chrome Silver
• Straight-through design for maximum weight savings and volume
• AWE Valve Simulator Brackets included to prevent CEL
• AWE No CEL Guarantee and Lifetime Warranty
• Retains factory emissions equipment
• Manufacturer Part Number: 3020-32429

Fits 2006-2013 Chevrolet Corvette Z06 and 2009-2013 Chevrolet Corvette ZR1.

The AWE Touring Edition Axle-Back Exhaust is a premium straight-through 3" exhaust system engineered to unleash the performance of the Corvette's LS engine while maintaining civil cabin acoustics. This system features AWE’s proprietary 180 Technology®, a drone-canceling solution that targets and eliminates specific frequencies for a drone-free experience at cruising speeds without sacrificing aggressive sound under throttle. Handcrafted in the USA, this exhaust is a direct bolt-on solution designed to integrate perfectly with the factory mounting points and either the OE X-pipe or the AWE aftermarket X-pipe.

Construction consists of 3" U.S.-sourced CNC mandrel-bent .065" wall T304L stainless steel for maximum durability and flow. The system is finished with quad 4.5" double-walled, slash-cut tips in a diamond black finish, providing a significant aesthetic upgrade over stock. Performance testing shows maximum gains of +11 hp and +3 lb-ft of torque at the wheels when paired with the stock X-pipe.

• Proprietary 180 Technology® drone-canceling solution for a refined cabin
• 3" CNC mandrel-bent .065" wall T304L stainless steel construction
• Quad 4.5" double-walled slash-cut tips in Diamond Black
• Modular design: Compatible with factory or AWE X-pipes
• Direct bolt-on fitment with no cutting or welding required
• No Check Engine Light (CEL) Guarantee
• AWE Lifetime Exhaust Warranty
• Manufacturer Part Number: 3015-43606

Fits 2022-2025 Subaru WRX models, including Base, GT, Limited, Premium, TR, and TS.

The AWE Touring Edition Axle-Back Exhaust provides the perfect balance of aggressive boxer tone and cabin comfort for the VB-chassis WRX. This system features AWE’s patented drone-canceling 180 Technology®, which utilizes internal ports and expansion chambers to neutralize harsh frequencies. The result is a deep, refined exhaust note during spirited driving that remains composed and drone-free at cruising speeds.

Each system is handcrafted from CNC mandrel-bent, U.S.-sourced 2.5" T304L stainless steel with a .065" wall thickness for maximum durability and flow. Designed as a direct bolt-on replacement, it mates to the factory midpipe flanges and includes all necessary gaskets for a seamless installation. This configuration is finished with quad 4-inch double-walled, slash-cut tips in Diamond Black.

• Patented 180 Technology® eliminates drone for a clean, deep exhaust note
• Handcrafted from 2.5" CNC mandrel-bent T304L stainless steel
• Quad 4" double-walled slash-cut tips in Diamond Black finish
• Touring Edition weight: 23 lbs (3 lbs lighter than factory axle-back)
• Direct bolt-on installation; includes new gaskets
• 50-state emissions legal
• AWE No Check Engine Light Guarantee
• Lifetime Warranty
• Manufacturer Part Number: 3015-43424

Fits 2014-2019 Chevrolet Corvette Stingray, Z06, Grand Sport, and ZR1 (6.2L).

The AWE Touring Edition Axle-Back Exhaust is engineered to deliver a raw, aggressive exhaust note for the C7 Corvette while maintaining daily-driver cabin comfort. This system features AWE's proprietary 180 Technology®, a drone-canceling solution that uses internal sound wave reflection to eliminate harsh frequencies at cruising speeds. Unlike traditional mufflers, this straight-through design maximizes exhaust flow without restrictive baffles or packing materials, allowing the 6.2L V8 to breathe freely.

Handcrafted from 3-inch U.S.-sourced T304L stainless steel with a .065-inch wall thickness, the system is CNC mandrel-bent to ensure consistent diameter and optimal scavenging. This kit includes AWE AFM Valve Simulators, which are required for AFM-equipped models (Stingray, Z51, and Grand Sport) to prevent electronic faults. The system is finished with quad 4.5-inch double-walled, individually adjustable tips in Diamond Black, allowing you to set the depth for a custom fit within the rear bumper.

• Max gains of 22 hp @ 6400 rpm and 20 lb-ft of torque @ 4000 rpm at the wheels
• 180 Technology® proprietary drone-canceling acoustics
• 3-inch CNC mandrel-bent .065-inch wall T304L stainless steel
• Includes AWE AFM Valve Simulators for hassle-free installation
• Quad 4.5-inch double-walled Diamond Black tips with laser-etched AWE logo
• Substantial weight savings over the factory exhaust system
• Direct bolt-on fitment — No Check Engine Light guaranteed
• AWE Lifetime Exhaust Warranty
• Manufacturer Part Number: 3015-43143

Fits 2006-2013 Chevrolet Corvette Z06 and 2009-2013 Corvette ZR1. The AWE Touring Edition Axle-Back Exhaust provides a deep, aggressive LS engine note while maintaining refined in-cabin acoustics. This straight-through system features AWE’s proprietary 180 Technology®, a drone-canceling solution designed to eliminate resonant frequencies at cruising speeds without restricting flow.

Constructed from U.S.-sourced 3-inch T304L stainless steel with .065-inch wall thickness, this system is CNC mandrel-bent for maximum durability and exhaust velocity. It is a direct bolt-on solution that requires no cutting and is compatible with both the factory X-pipe and the AWE performance X-pipe. The system is finished with quad 4.5-inch double-walled, slash-cut tips in chrome silver for a premium aesthetic.

• Proprietary 180 Technology® drone-canceling resonance control
• Max gains of +11 hp and +3 lb-ft of torque (tested with stock X-pipe)
• 3-inch CNC mandrel-bent T304L stainless steel construction
• Quad 4.5-inch double-walled, slash-cut tips in Chrome Silver
• Direct bolt-on installation; no cutting or modifications required
• Handcrafted in the USA and backed by a Lifetime Exhaust Warranty
• No Check Engine Light Guarantee
• Manufacturer Part Number: 3015-42606

Fits 2022-2025 Subaru WRX (Base, GT, Limited, Premium, TR, and TS).

The AWE Touring Edition Axle-Back Exhaust offers a sophisticated balance of acoustic aggression and daily-driving comfort for the VB WRX. Built with AWE’s patented 180 Technology®, this system uses internal resonance chambers to cancel out specific drone-prone frequencies, ensuring a clean, deep tone while cruising and a rowdy boxer growl under heavy acceleration. The straight-through design maximizes exhaust flow and reduces weight compared to the factory setup.

Construction features 2.5-inch U.S.-sourced T304L stainless steel with a .065-inch wall thickness. This direct bolt-on system connects to the factory midpipe flanges and includes all necessary gaskets for a seamless installation. The system is finished with quad 4-inch double-walled, slash-cut tips in chrome silver for a premium aesthetic.

• Patented drone-canceling 180 Technology®
• Handcrafted from CNC mandrel-bent .065” wall T304L stainless steel
• Quad 4-inch double-walled, slash-cut chrome silver tips
• Lightweight design: 23 lbs vs. 26 lbs stock
• 50-state emissions legal and direct bolt-on fitment
• AWE No Check Engine Light Guarantee
• Manufacturer Part Number: 3015-42424