Fits select 1997-2013 Chevrolet Corvette C5 and C6 models using 12.00-inch diameter rear rotors.

Wilwood DPC56 rear calipers provide a high-performance upgrade for street and custom applications using Corvette suspension. These four-piston fixed-mount calipers deliver superior response and more balanced pad loading compared to factory sliding units. Engineered for a seamless installation, they bolt directly to the OE Corvette spindle without the need for brackets or adapters and are designed to accept factory banjo-bolt style brake hoses.

• Manufacturer Part Number: 120-13916-BK
• Piston Size: 1.25 in
• Disc Width: 1.04 in
• Configuration: 4-Piston Fixed Mount
• Finish: Black Powder Coat
• Installation: Direct bolt-on to factory mounting points
• Compatibility: All 1997-2004 C5 models and 2005-2013 C6 base models

The Wilwood Forged Billet Dynalite Internal (MPN 120-13840) represents the next generation of the industry-standard Dynalite series. This caliper utilizes a spacer-less, single-split bridge design that significantly increases structural rigidity while providing a cleaner, more compact profile. By eliminating the traditional spacer blocks, Wilwood has reduced potential flex under high braking loads, ensuring more consistent pedal feel and clamping force.

Forged from high-strength billet aluminum, this caliper is engineered for durability in performance applications. It features internal fluid crossovers that eliminate external tubes, protecting the hydraulic system from debris and heat. This specific configuration is designed for 1.00-inch wide rotors and utilizes 1.38-inch diameter pistons to provide precise modulation.

• Manufacturer Part Number: 120-13840
• Piston Count: 4 Pistons
• Piston Diameter: 1.38 in (35.1 mm)
• Rotor Width: 1.00 in (25.4 mm)
• Material: Forged Billet Aluminum
• Design: Internal crossover with single split bridge

Fits select 2015-2024 Toyota 4Runner and 2016-2023 Lexus GX460 (V6-4.0L / V8-4.6L).

Power Stop S15020 Red Powder Coated Brake Calipers provide a high-performance aesthetic and long-term durability for enthusiasts. These front calipers are engineered to bolt directly to the factory mounting points, replacing worn or corroded original equipment. Every caliper undergoes a 100% pressure test to verify piston operation and seal integrity, ensuring reliable hydraulic performance out of the box.

The calipers feature a durable electrostatic high-temperature red powder coating that resists rust and corrosion while remaining easy to clean. Assembled with premium EPDM rubber dust boots and seals, these units are designed to withstand extreme thermal cycles without losing flexibility. This pair comes complete with the necessary hardware to finish the installation, including stainless-steel pad attachment pins and bleeder screws.

• Manufacturer Part Number: S15020
• Position: Front Left and Right (Pair)
• Finish: High-temperature red powder coat
• Direct bolt-on installation with no modifications required
• Includes new EPDM rubber seals and dust boots
• Includes new bleeder screws and stainless-steel pad retainer pins/clips
• 100% pressure tested and inspected for guaranteed operation
• Note: Mounting brackets not included; designed for use with existing OE brackets

The Wilwood MC4 Mechanical Parking Brake Caliper (120-12070-RD) provides a high-output, cable-operated solution for vehicles requiring a dedicated secondary braking system. Engineered for reliability and simplicity, this left-hand (L/H) caliper combines a lightweight die-cast body with a forged billet anvil to ensure maximum strength under load while maintaining a low weight of just 3.30 lbs with pads installed.

• Engineered Strength: Combines an efficient die-cast body with a forged billet anvil for superior clamping rigidity.
• Rotor Compatibility: Designed for use with rotors .810-inch thick and within a diameter range of 11.00 to 12.88 inches.
• Premium Components: Includes high-friction Composite Metallic (CM) pads with pre-fitted noise-canceling shields for exceptional static-hold performance.

• Manufacturer Part Number: 120-12070-RD
• Piston Size: 1.19 in
• Rotor Thickness: .81 in
• Rotor Diameter Range: 11.00 in - 12.88 in
• Weight: 3.30 lbs (2.95 lbs without pads)
• Side: Left Hand

The Wilwood Electronic Parking Brake (EPB) Caliper Controller (MPN 620-15487) provides the essential logic and power management required to operate electronic parking brake systems. Designed for custom builds and high-performance brake upgrades, this controller allows for push-button parking brake engagement, replacing traditional mechanical cables and floor levers with a modern, electronic solution.

• Precision Management: Engineered to handle the specific voltage and current requirements of EPB caliper motors during engagement and release cycles.
• System Integration: Operates on a standard 12V DC system, making it compatible with most automotive electrical architectures.
• Compact Design: Housed in a durable plastic casing with integrated mounting points for secure installation inside the vehicle cabin or trunk area.
• Vehicle Neutral: This controller is designed to interface with Wilwood EPB calipers across various custom applications.
• Specifications: 12V operation; Manufacturer Part Number 620-15487.

Ensure consistent, reliable activation of your rear braking system with the Wilwood Electronic Parking Brake (EPB) Caliper Wiring Harness. This specialized harness provides the necessary electrical link between your EPB control system and the motor-actuated parking brake calipers. Built to withstand the harsh environment of the wheel well, it maintains signal integrity for safe and secure parking brake engagement.

• Direct component for Wilwood Electronic Parking Brake systems
• Engineered for secure electrical connectivity and motor actuation
• Constructed with durable insulation to resist heat and road debris
• Manufacturer Part Number: 610-15588

The Wilwood Electronic Parking Brake (EPB) Caliper Switch Kit (300-15936) provides a reliable, clean-mount solution for controlling your rear EPB calipers. This kit is essential for vehicles equipped with Wilwood's motor-driven parking brake systems, allowing for easy activation and release of the brake motors from the driver's seat.

Built to handle the specific electrical requirements of the EPB system, this kit simplifies your wiring and cockpit integration. The included adhesive-backed "On/Off" sticker ensures a professional finish and clear identification on your dashboard or console, making it ideal for custom builds, restomods, and performance rear brake conversions.

• Manufacturer Part Number: 300-15936
• Designed for use with Wilwood Electronic Parking Brake (EPB) calipers
• Includes heavy-duty toggle switch for secure motor engagement
• Includes high-visibility On/Off identification sticker
• Provides a clean, professional solution for custom interior mounting

Fits 1989-1998 Nissan 240SX (S13 and S14 chassis).

The Wilwood FNSL4R/MC4 Rear Parking Big Brake Kit (BBK) is a comprehensive brake upgrade designed to provide consistent stopping power and a dedicated parking brake solution for the Nissan S-chassis. This kit utilizes the Forged Narrow Superlite 4-piston (FNSL4R) calipers as the primary brakes, offering high clamping force and excellent pedal modulation. To maintain street legality and convenience, the system includes separate MC4 mechanical parking brake calipers that integrate seamlessly into the rear assembly.

Featuring 13.50-inch slotted rotors, this kit increases the thermal capacity of your braking system, reducing fade during aggressive use while the slotted surface helps gas and debris escape the pad-rotor interface. The calipers are finished in a vibrant red powder coat for long-lasting corrosion resistance and a performance aesthetic.

• Manufacturer Part Number: 140-18271-R
• Primary Caliper: FNSL4R Forged Narrow Superlite 4R (4-Piston)
• Parking Caliper: MC4 Mechanical Parking Brake Caliper
• Rotor Diameter: 13.50 inches
• Rotor Type: Slotted for improved heat dissipation
• Caliper Finish: Red Powder Coat
• Compatibility: Replaces factory rear brakes on 1989-1998 Nissan 240SX

The Wilwood Electronic Parking Brake (EPB) Rear Retrofit Kit provides a high-performance, modern solution for vehicles requiring a dedicated parking brake without the complexity of traditional cable-actuated systems. This high-torque, motor-driven caliper assembly is engineered specifically to work with 1.250-inch thick rotors, making it the perfect addition to custom rear brake conversions and performance builds.

By utilizing an electronic actuator motor, this kit eliminates the need for mechanical levers and floor-mounted cable routing, resulting in a cleaner chassis and simplified installation. The black finish offers a sleek, professional look while providing durable protection against the elements. This retrofit kit is designed for enthusiasts looking to integrate a reliable, push-button parking brake system into their existing performance brake configuration.

• Manufacturer Part Number: 140-16849-BK
• Rotor Compatibility: Fits 1.250" (31.75mm) thick rotors
• Caliper Finish: Black
• Actuation: High-torque electronic motor
• Application: Rear parking brake retrofit for specialty performance setups

The Wilwood Electronic Parking Brake (EPB) Rear Retrofit Kit (140-15979-RD) provides a high-torque, motor-driven solution for vehicles requiring a reliable parking brake without the clutter of traditional cables. This kit is engineered for rear disc brake applications, offering a clean, modern alternative to mechanical cable-actuated setups.

• High-Torque Actuation: Replaces manual floor levers and foot pedals with a powerful electronic motor built into the caliper.
• Durable Finish: Calipers are finished in a vibrant red powder coat for maximum corrosion resistance and a custom appearance.
• Comprehensive Solution: Includes two electronic parking brake calipers, a dedicated control module, a wiring harness, and a dash-mountable switch.
• Ease of Installation: Designed to simplify parking brake routing in custom chassis or tight wheel wells where cable clearance is an issue.
• Manufacturer Part Number: 140-15979-RD

Modernize your vehicle's braking system with the Wilwood Electronic Parking Brake (EPB) Rear Retrofit Kit. This kit provides a high-torque, motor-driven solution for vehicles where traditional mechanical cable-actuated parking brakes are difficult to route or consolidate. Designed for performance and aesthetics, the calipers feature a durable black powder coat finish that resists corrosion and brake fluid staining.

• Replaces mechanical cable systems with a simplified electronic motor-on-caliper design
• High-torque motor provides superior static holding power on inclines
• Single-piston EPB calipers finished in a protective black powder coat
• Ideal for custom chassis, performance builds, and rear-brake upgrades
• Manufacturer Part Number: 140-15979-BK

This retrofit kit includes the specialized EPB calipers, wiring harness, and control switch needed to integrate an electronic parking brake into your existing rear brake setup. It eliminates the clutter of cables and levers, providing a clean, modern solution for street rods, muscle cars, and track vehicles.

The Wilwood Electronic Parking Brake (EPB) Rear Retrofit Kit provides a high-torque, modern solution for vehicles requiring a secondary parking brake without the complexity of traditional mechanical cables. This system utilizes a microprocessor-controlled motor to provide reliable clamping force, making it an ideal choice for custom builds or rear disc brake conversions where cable routing is restricted.

Engineered for use with 0.810-inch thick rotors, this kit features a high-performance caliper finished in a durable red powder coat. The electronic actuation replaces manual pull-levers and pedal assemblies with a simple cabin-mounted switch, simplifying the chassis layout while maintaining a clean, professional appearance.

• Manufacturer Part Number: 140-15978-RD
• Caliper Finish: Red Powder Coat
• Rotor Thickness Compatibility: 0.810 in (20.6 mm)
• Actuation: High-torque electronic motor
• System Includes: Electronic caliper, control module (ECU), wiring harness, and activation switch
• Application: Rear retrofit / secondary parking brake setup

Eliminate the complexity of cable-actuated parking brakes with the Wilwood Electronic Parking Brake (EPB) Rear Retrofit Kit. This standalone system provides a high-torque, electronically controlled parking solution for custom builds or performance upgrades where traditional cable routing is difficult or impossible. Engineered for use with 0.810-inch thick rotors, this kit features a durable black finish for a clean, professional appearance behind the wheel.

As a complete retrofit solution, this kit replaces mechanical lever-style calipers with reliable electronic units. It includes the calipers, a dedicated electronic control unit (ECU), and a complete wiring harness, ensuring a straightforward installation that integrates seamlessly into your vehicle's rear brake configuration.

• Manufacturer Part Number: 140-15978-BK
• Rotor Thickness Compatibility: 0.810"
• Finish: Black powder coat for superior corrosion resistance
• Actuation: High-torque electronic motor-on-caliper design
• Includes: Calipers, ECU, wiring harness, and switch hardware

Fits 2006-2015 Honda Civic Si.

The Wilwood Combination Parking Brake (CPB) Rear Kit (MPN: 140-11979-DR) utilizes specialized hydro-mechanical calipers that combine hydraulic master cylinder pressure for stopping power with an internal mechanical lock for parking brake functionality. This system is specifically engineered for the 2006-2015 Honda Civic Si, providing an effective solution for vehicles that are not well-suited for traditional internal shoe-style parking brakes.

The kit features oversized 12.19-inch two-piece rotor assemblies, utilizing aluminum hats to reduce unsprung weight and rotational mass. Paired with high-friction BP-10 compound pads, this kit is designed to provide balanced brake performance and a matching aesthetic for vehicles already equipped with front big brake upgrades.

• Manufacturer Part Number: 140-11979-DR
• 12.19-inch diameter drilled and e-coated rotors
• Red powder-coated hydro-mechanical CPB calipers
• Lightweight aluminum rotor hats for improved heat dissipation
• High-performance BP-10 compound brake pads included
• Complete rear kit designed for factory mounting compatibility

Fits select 2007-2015 Mini Cooper models, including Base, S, John Cooper Works, GP, Roadster, and Coupe.

The Wilwood CPB (Combination Parking Brake) Series rear brake kit provides a specialized hydro-mechanical solution for enthusiasts looking to balance stopping power with reliable parking brake functionality. These calipers utilize hydraulic pressure from the master cylinder for standard braking while incorporating an internal mechanical lock for the parking brake. This design is engineered specifically for vehicles like the Mini Cooper that are not well-suited for internal shoe-style parking brakes.

The system features oversized 11.75-inch two-piece rotor assemblies with lightweight aluminum hats to reduce unsprung weight and improve heat management. The drilled rotor surfaces further enhance cooling and pad outgassing, while the included BP-10 compound pads provide consistent friction and response for high-performance street use.

• Manufacturer Part Number: 140-10885-DR
• Caliper Type: Combination hydro-mechanical
• Caliper Finish: Red powder coat
• Rotor Diameter: 11.75 inches
• Rotor Design: Two-piece drilled with aluminum hats
• Brake Pad Compound: BP-10 high-friction
• Included Hardware: Calipers, rotors, pads, and mounting brackets

Fits 2000-2009 Honda S2000 Base and CR models.

The Wilwood Combination Parking Brake (CPB) Rear Kit provides a specialized high-performance braking solution for the Honda S2000, integrating hydraulic stopping power with a dedicated mechanical parking brake. This system utilizes hydro-mechanical calipers that use hydraulic pressure for primary braking while featuring an internal mechanical lock for the parking brake function. Designed to complement front big brake upgrades, this kit ensures balanced brake bias and a consistent visual aesthetic across both axles.

The kit is built around oversized 12.88-inch two-piece rotor assemblies. These rotors utilize lightweight aluminum hats to minimize unsprung weight for better suspension response. The drilled rotor surface enhances cooling and gas venting during spirited driving, while the included BP-10 high-friction compound pads offer a reliable bite with low noise and dust.

• Manufacturer Part Number: 140-10310-DR
• Caliper Type: CPB Hydro-Mechanical
• Caliper Finish: Red Powder Coat
• Rotor Diameter: 12.88 inches
• Rotor Style: Drilled
• Rotor Construction: Two-piece with aluminum hats
• Brake Pad Compound: Wilwood BP-10

Fits 1992-2000 Honda Civic models including CX, DX, EX, GX, HX, LX, VX, and Value Package.

The Wilwood Combination Parking Brake (CPB) Rear Kit is engineered to provide high-performance stopping power and a reliable parking brake solution for vehicles originally equipped with rear drum brakes. This system features unique hydro-mechanical calipers that utilize hydraulic pressure for primary braking while incorporating an internal mechanical lock for parking brake functionality. This design is an ideal upgrade for Honda Civic rear spindles that cannot accommodate traditional internal shoe-style parking brakes.

This kit replaces factory components with oversized 11.00-inch two-piece rotor assemblies. The rotors are mated to lightweight aluminum hats to reduce unsprung weight, improving suspension response. For consistent performance, Wilwood includes BP-10 high-friction compound pads, providing the necessary brake balance to complement a front big brake upgrade.

• Manufacturer Part Number: 140-10208-DR
• Rotor Diameter: 11.00 inches
• Rotor Type: Two-piece drilled assembly
• Caliper Finish: Red Powder Coat
• Hub Offset: 2.46 inches
• Brake Pad Compound: BP-10 SmartPad
• Application: Rear drum spindle conversion

Fits select 1990-2001 Honda Civic, CRX, del Sol, and Acura Integra models (see fitment table for specific trims).

This Wilwood CPB (Combination Parking Brake) Series kit provides a high-performance solution for vehicles requiring both hydraulic stopping power and a mechanical parking brake. These hydro-mechanical calipers utilize hydraulic pressure from the master cylinder for service braking while incorporating an internal mechanical lock for parking brake functionality. This design is specifically engineered for front-wheel-drive vehicles and select rear axles where internal shoe-style parking brakes are not compatible.

The kit features oversized 11.00-inch two-piece rotor assemblies paired with lightweight aluminum hats to reduce unsprung weight. Combined with high-friction BP-10 compound pads, this system delivers balanced brake performance and a visual aesthetic that matches front big brake upgrades.

• Manufacturer Part Number: 140-10206-R
• Caliper Type: CPB Combination Parking Brake
• Caliper Finish: Red Powder Coat
• Rotor Diameter: 11.00 inches
• Rotor Design: Two-piece with Aluminum Hats
• Brake Pad Compound: Wilwood BP-10
• Hub Offset: 2.39 inches
• Brake Type: Disc

Fits select 1990-2001 Acura Integra, Honda Civic, Civic del Sol, and CRX models with a 2.39-inch hub offset. This Wilwood Combination Parking Brake (CPB) rear kit is engineered to provide high-performance stopping power and a functional parking brake solution for front-wheel-drive platforms where internal shoe-style brakes are impractical.

The system utilizes Wilwood's hydro-mechanical calipers, which combine hydraulic pressure for primary braking with an internal mechanical lock for parking. These calipers are paired with 11.00-inch two-piece rotor assemblies featuring lightweight aluminum hats for reduced unsprung weight and better heat dissipation. This kit is designed to complement front big brake upgrades, ensuring balanced bias and a matching aesthetic.

• Caliper Type: Combination Hydro-Mechanical Parking Brake Calipers
• Caliper Finish: Red Powder Coat
• Rotor Style: 11.00-inch Drilled and Slotted Two-Piece Rotors
• Rotor Material: Iron with Aluminum Hats
• Brake Pads: High-friction BP-10 compound pads included
• Hub Offset: 2.39 inches
• MPN: 140-10206-DR

Fits select 1990-2001 Acura Integra and Honda Civic, Civic del Sol, and CRX models with factory disc brake spindles.

The Wilwood Combination Parking Brake (CPB) Rear Kit is engineered for enthusiasts requiring enhanced stopping power without sacrificing parking brake functionality. These kits utilize hydro-mechanical calipers that apply hydraulic pressure via the master cylinder for service braking, while an internal mechanical lock provides a secure parking brake. This design is specifically optimized for front-wheel-drive platforms and rear axles that cannot accommodate internal shoe-style parking brakes.

The system features 11.00-inch oversized two-piece rotor assemblies with lightweight aluminum hats to reduce unsprung weight. The drilled rotor surfaces improve gas dissipation and heat management during spirited driving. Paired with Wilwood BP-10 high-friction compound pads, this kit delivers a balanced brake profile that complements front big brake upgrades for consistent, reliable performance.

• Manufacturer Part Number: 140-10206-D
• Rotor Diameter: 11.00 inches (279.4 mm)
• Rotor Type: Two-piece drilled rotor with aluminum hat
• Caliper Type: Combination Hydro-Mechanical Parking Brake Caliper
• Brake Pad Compound: BP-10 SmartPad
• Hub Offset: 2.39 inches
• Hardware: Includes all necessary mounting brackets and high-strength fasteners

Fits select 1990-2001 Acura Integra, Honda Civic, Civic del Sol, and CRX. This Wilwood CPB (Combination Parking Brake) Rear Kit provides a high-performance braking solution for vehicles requiring an integrated parking brake mechanism. These kits utilize specialized calipers that combine hydraulic pressure for standard stopping power with an internal mechanical lock for a secure parking brake. Designed primarily for front-wheel-drive platforms, this kit replaces factory rear discs to provide the balanced braking performance and aesthetics needed to complement front big brake upgrades.

The system features 11.00-inch two-piece rotor assemblies, pairing precision-machined friction surfaces with lightweight aluminum hats to reduce unsprung weight and improve heat dissipation. The included BP-10 compound pads offer a high-friction response with low noise and dust levels, making them ideal for spirited street and performance driving.

• Manufacturer Part Number: 140-10206
• Rotor Diameter: 11.00 inches
• Hub Offset: 2.39 inches
• Caliper Type: CPB Hydro-Mechanical
• Rotor Construction: Two-piece with aluminum hats
• Brake Pad Compound: Wilwood BP-10
• System Application: Rear Disc Conversion/Upgrade

Fits 1994-2004 Ford Mustang (Base, GT, Bullitt, Mach 1, and SVT Cobra/Cobra R).

The Wilwood CPB (Combination Parking Brake) Rear Kit provides a specialized braking solution for SN95 and New Edge Mustangs. These kits feature high-performance hydro-mechanical calipers that utilize hydraulic pressure from the master cylinder for standard stopping power while maintaining an internal mechanical lock for the parking brake. This design is specifically engineered for rear-wheel-drive axles where internal shoe-style parking brakes are not compatible or desired.

The system centers around oversized 12.88-inch two-piece rotor assemblies, featuring aluminum hats to reduce unsprung weight and cross-drilled surfaces for improved heat dissipation and gas venting. Paired with Wilwood SmartPad BP-10 high-friction compound pads, this kit provides the balanced brake performance necessary to complement front big brake upgrades.

• Manufacturer Part Number: 140-10158-DR
• Caliper Type: CPB Combination Hydro-Mechanical
• Caliper Finish: Red Powder Coat
• Rotor Diameter: 12.88-inch
• Rotor Design: Two-Piece Drilled with Aluminum Hats
• Pad Compound: BP-10 SmartPad
• Ideal for street performance and show applications

The Wilwood DynaPro (DP) Lug Mount forged billet caliper is a high-performance upgrade or replacement designed for applications originally utilizing the classic Dynalite series. This caliper integrates race-proven technology with modern refinements, featuring a sleek, high-strength profile and a detail-machined finish suitable for both competitive racing and show-quality builds.

Constructed from forged aluminum for maximum structural integrity, the DynaPro provides superior stiffness and reduced deflection under heavy braking loads. This model (MPN: 120-9705) is engineered for 5.25-inch lug mounting centers and is compatible with thin .38-inch rotors, making it an ideal choice for specialized light-duty or drag racing applications where weight and clearance are critical.

• Piston Size: 1.38-inch diameter for precise clamping force.
• Rotor Width: Designed specifically for .38-inch (9.6mm) thick discs.
• Mounting: 5.25-inch lug mount centers.
• Construction: Forged billet aluminum for high-strength durability.
• Finish: Precision-machined for professional aesthetics.
• Manufacturer Part Number: 120-9705.

The Wilwood DynaPro (DP) Lug Mount forged billet caliper (120-9703-SI) represents a high-performance evolution for braking systems, designed as a precision upgrade or replacement for applications previously utilizing the long-standing Dynalite model series. Engineered for both competition and show use, the DynaPro combines race-proven technology with increased body stiffness and a sleek, fully detail-machined finish.

Constructed from forged aluminum, this caliper offers superior strength and reduced deflection under heavy braking loads. The precision-machined bore and 1.38-inch pistons provide consistent clamping force, while the 5.25-inch mounting centers allow for straightforward integration into existing lug-mount configurations. This model is specifically engineered for use with 0.81-inch thick rotors.

• Manufacturer Part Number: 120-9703-SI
• Caliper Series: DynaPro (DP)
• Piston Size: 1.38 in
• Mount Centers: 5.25 in
• Rotor Width Compatibility: 0.81 in
• Material: Forged Billet Aluminum
• Mount Type: Lug Mount

The Wilwood DynaPro (DP) Lug Mount forged billet caliper is a high-performance 4-piston upgrade designed to replace or improve upon the classic Dynalite series. Engineered for both competition use and show-quality aesthetics, this caliper combines pure racing technology with a sleek, low-profile body for superior clearance and strength.

• Forged Billet Body: Constructed from high-strength aluminum to resist deflection and maintain consistent pedal feel.
• Piston Diameter: Features four 1.38-inch pistons for balanced clamping force.
• Disc Requirements: Designed specifically for use with 0.81-inch thick brake rotors.
• Mounting Specifications: Features standard 5.25-inch mounting centers for precise lug-mount installation.
• Finish: Red powder coat finish for lasting durability and corrosion resistance.
• Manufacturer Part Number: 120-9703-RD

The Wilwood DynaPro Lug Mount (DP) forged billet caliper (120-9703) represents the next-generation evolution of the classic Dynalite series. This high-performance caliper combines race-proven technology with modern refinements, making it an ideal upgrade for competition or high-end show vehicles. The forged billet body provides exceptional rigidity, ensuring consistent pedal feel and reliable stopping power under high thermal loads.

Designed as a direct upgrade or replacement for applications previously using Dynalite models, the DynaPro features a sleek, low-profile design and a fully detail-machined finish. It utilizes a 5.25-inch lug mount pattern and is specifically engineered for use with 0.81-inch thick rotors.

• Series: DynaPro Lug Mount (DP)
• Construction: Forged Billet Aluminum
• Piston Size: 1.38 in
• Disc Thickness: 0.81 in
• Mounting Center: 5.25 in
• Finish: Detail Machined
• Manufacturer Part Number: 120-9703

The Wilwood DynaPro Lug Mount (DP) forged billet caliper (120-9701) is a high-performance upgrade or replacement for vehicles previously equipped with the Dynalite model series. Engineered with race-proven technology, this caliper features a sleek, detail-machined profile that provides superior strength for competition use or show-ready aesthetics.

Constructed from high-strength forged billet aluminum, the DynaPro body is designed to minimize deflection under heavy braking while maintaining a compact footprint. This model utilizes stainless steel pistons to provide consistent clamping force and resist heat transfer during high-temperature operation.

• Manufacturer Part Number: 120-9701
• Mounting Spacing: 5.25 inches (Lug Mount)
• Piston Diameter: 1.38 inches
• Rotor Width Compatibility: 1.25 inches
• Construction: Forged Billet Aluminum
• Finish: Machined Billet

The Wilwood DynaPro Lug Mount (DP) Forged Billet Caliper (MPN: 120-9695) represents the latest evolution in high-performance braking, designed as a direct upgrade or replacement for applications utilizing the classic Dynalite series. Engineered with pure race technology, this caliper combines a sleek, low-profile design with the superior structural integrity of forged billet aluminum construction.

Each caliper features a fully detail-machined finish, providing a professional look suitable for both competitive racing and high-end show vehicles. The DynaPro series focuses on minimizing deflection while maintaining a compact footprint for versatile fitment across various motorsport applications.

• Series: DynaPro Lug Mount (DP)
• Piston Size: 1.75 in
• Mount Centers: 5.25 in
• Compatible Rotor Width: 0.38 in
• Construction: Forged billet aluminum
• Part Number: 120-9695

The Wilwood DynaPro Single (DPS) billet caliper (MPN 120-9689) represents the next generation of braking performance, designed as a direct upgrade or replacement for applications originally utilizing the Dynalite Single (DLS) series. CNC-machined from premium billet aluminum, the DPS series combines a compact, lightweight profile with structural enhancements that increase overall body stiffness and reduce deflection under high-load braking.

• Precision Engineering: High-strength billet construction ensures consistent clamping force and improved pedal feel.
• Direct Replacement: Designed to mount in place of the DLS series, providing a modern performance upgrade without complex modifications.
• Versatile Application: Optimized for a wide range of motorsports and custom projects requiring a durable, single-piston configuration.

• Manufacturer Part Number: 120-9689
• Caliper Series: DynaPro Single (DPS)
• Mounting Centers: 3.75 in
• Piston Diameter: 1.75 in
• Compatible Disc Width: 0.38 in
• Material: Billet Aluminum

The Wilwood DynaPro Single (DPS) billet caliper (MPN 120-9688) is a high-strength performance upgrade designed to replace the legacy Dynalite Single (DLS) series. This next-generation caliper is precision-machined from premium billet aluminum, offering superior structural integrity and reduced deflection under hard braking conditions.

• Direct replacement for Dynalite Single (DLS) series applications
• Dual 1.38-inch pistons for balanced clamping force
• Designed for use with 0.38-inch thick rotors
• Standard 3.25-inch center-to-center lug mounting
• Compact billet aluminum body for lightweight durability

Engineered for specialized racing and high-performance applications where space is at a premium, the DPS series provides enhanced fluid flow and thermal stability compared to previous models. This caliper is the ideal choice for builders seeking a reliable, high-tolerance braking component that fits existing DLS mounting points.