Fits select 2017-2026 Acura, Ford, Honda, Lincoln, Mazda, Ram, and Volkswagen vehicles (see fitment list for specific models).

The DFC 340-59059 Premium Hardware Kit is engineered to restore your braking system to peak factory performance. Brake hardware is often overlooked during a pad change, but worn clips and pins are the primary cause of brake drag, excessive noise, and uneven pad wear. This kit provides a comprehensive solution for front or rear brake servicing, ensuring smooth operation and consistent clamping force.

Constructed with high-quality materials to withstand the extreme environment of the wheel well, this hardware set features specialized coatings designed for longevity and performance. The low-friction design reduces resistance during pad travel, while the high heat and chemical resistance ensure the components won't degrade under heavy braking loads or exposure to road salt and fluids.

• Manufacturer Part Number: 340-59059
• Low Coefficient of Friction: Promotes smooth pad movement and reduces drag
• Corrosion Resistance: Protects against road debris and moisture
• High Heat Resistance: Maintains structural integrity under extreme braking temperatures
• Chemical Resistance: Resilient against brake fluids and cleaners
• Easy Installation: Designed for precise fitment and straightforward assembly

Fits 2017-2026 Acura Integra Type S, Dodge Challenger, Dodge Charger, and Honda Civic Type R.

The DFC Front Premium Brake Hardware Kit (340-59056) is engineered to restore factory-smooth operation and maintain consistent pad tension within the caliper bracket. Over time, heat cycles and environmental exposure cause OE hardware to lose its spring tension, leading to uneven pad wear, brake drag, and excessive noise. Replacing your hardware during every brake service ensures the calipers can release properly and pads can move freely.

• Low Coefficient of Friction: Minimizes drag and ensures smooth pad movement for better response.
• High Heat Resistance: Maintains structural integrity and spring tension under aggressive braking conditions.
• Corrosion Resistance: Specialized finish protects against road salt and moisture to prevent binding.
• Chemical Resistance: Durable construction stands up to brake cleaners and hydraulic fluid.
• Easy Assembly & Removal: Precision-formed for a direct replacement of factory clips and shims.

Each kit is manufactured to strict tolerances to meet or exceed original equipment performance, ensuring a quiet, vibration-free braking system.

Fits select 2005-2025 Acura RDX and TLX; Honda Accord Crosstour, CR-V, Crosstour, Odyssey, and Passport; and Subaru Legacy vehicles. This DFC Premium Front Brake Hardware Kit (MPN 340-59048) is engineered to restore your braking system to optimal performance by replacing worn or fatigued clips, springs, and pins.

Brake hardware is often overlooked but critical for proper pad movement and consistent pressure. This kit features a low coefficient of friction to prevent brake drag and ensure smooth pad retraction, which helps eliminate noise and prevents uneven wear. Each component is manufactured to withstand the extreme environment of the wheel well, offering high resistance to heat, chemicals, and road salt.

• Corrosion Resistance: Specifically treated to resist rust and environmental degradation for long-term durability.
• High Heat Tolerance: Maintains structural integrity and spring tension under the intense thermal loads of heavy braking.
• Precision Fit: Designed for easy assembly and removal, matching factory specifications for a hassle-free installation.
• Low Friction Coating: Facilitates smooth pad movement to reduce drag and improve fuel efficiency.
• Manufacturer Part Number: 340-59048

Fits select 2013-2025 Acura ILX, RDX, RLX and Honda Accord, Civic Si, and HR-V.

The DFC Premium Front Brake Hardware Kit (340-59047) is engineered to restore factory braking performance by replacing worn or corroded caliper hardware. Maintaining fresh hardware is critical for ensuring smooth brake pad movement, preventing uneven wear, and eliminating common brake squeal caused by vibration and drag.

• Low Coefficient of Friction: Promotes smooth pad sliding and consistent engagement for better pedal feel.
• High Heat Resistance: Maintains structural integrity and tension even under extreme braking temperatures.
• Corrosion & Chemical Resistance: Resists road salt and automotive chemicals for a longer service life in harsh environments.
• Precision Fit: Designed to OE-style tolerances for easy assembly and removal during routine maintenance.

This kit includes the necessary front axle hardware components to refresh your braking system and ensure quiet, reliable operation.

Fits select 2003-2020 Acura TL, TLX and Honda Pilot, Ridgeline models.

The DFC 340-59045 Front Premium Hardware Kit is an essential component for any professional brake service, ensuring that your brake pads move freely and retract properly within the caliper. Over time, heat cycles and road debris cause factory hardware to lose its tension or corrode, leading to uneven pad wear, excessive noise, and reduced braking efficiency. This kit replaces worn OE clips and springs with precision-engineered components designed for long-term reliability.

• Low Coefficient of Friction: Facilitates smooth pad movement to prevent dragging and premature wear.
• High Heat & Chemical Resistance: Engineered to withstand the extreme temperatures of the braking system and resist degradation from brake fluid or road chemicals.
• Corrosion Resistance: Durable construction prevents rust buildup, which is a primary cause of brake binding.
• Direct Fit: Designed for easy assembly and removal, meeting the tolerances required for a quiet, vibration-free installation.

Fits select 2007-2025 Acura and Honda models, including MDX, ZDX, Odyssey, Passport, Pilot, and Ridgeline.

The DFC Premium Rear Brake Hardware Kit is engineered to restore your braking system's factory performance and reliability. Over time, heat cycles and environmental exposure cause original equipment clips and springs to lose tension, leading to uneven pad wear, noise, and dragging. This kit (340-59043) replaces worn components with precision-engineered hardware designed for long-term durability and smooth operation.

• Low coefficient of friction ensures consistent brake pad movement and release
• High-grade materials offer superior resistance to heat and chemical degradation
• Treated for long-lasting corrosion resistance in harsh road conditions
• Manufactured to precise tolerances for easy assembly and removal
• Essential for ensuring even pressure distribution across the brake rotor surface
• Manufacturer Part Number: 340-59043

Fits select 2008-2017 Honda Accord and 2009-2014 Acura TSX.

The DFC Premium Rear Brake Hardware Kit (340-59039) is engineered to restore your vehicle's braking system to peak efficiency. Quality hardware is essential for ensuring brake pads slide freely within the caliper bracket, preventing uneven pad wear, dragging, and brake noise. This kit replaces worn or fatigued factory components with precision-engineered hardware designed to withstand the extreme temperatures and chemicals inherent to the braking system.

• Low coefficient of friction for smooth pad movement and consistent engagement
• High heat and chemical resistance to maintain structural integrity under load
• Corrosion-resistant finish to prevent binding and extend service life
• Designed for easy assembly and removal during brake service
• Direct replacement for OE rear hardware components
• Manufacturer Part Number: 340-59039

Fits select 2002-2021 Acura ILX and Honda Accord, Civic, CR-V, CR-Z, Element, and Fit models.

Restore your braking system’s efficiency with the DFC 340-59017 Front Premium Brake Hardware Kit. Over time, factory clips and springs lose their tension due to constant heat cycles and environmental exposure, leading to increased noise, uneven pad wear, and brake drag. This premium kit is designed to replace worn OE components with high-quality hardware that ensures proper pad alignment and smooth caliper operation.

• Manufactured for a low coefficient of friction to facilitate smooth brake pad movement.
• High heat resistance maintains tension and performance under heavy braking conditions.
• Superior corrosion and chemical resistance for long-term durability in harsh road environments.
• Precision-engineered for easy assembly and removal during brake service.
• Helps eliminate brake squeal and vibration by providing a secure fit for the brake pads.
• Manufacturer Part Number: 340-59017

Fits select 1987-2022 Acura, Honda, Isuzu, and Suzuki models including Legend, Accord, Civic, CR-V, and RDX.

The DFC 340-59015 Rear Premium Brake Hardware Kit is engineered to restore the proper function of your vehicle's disc brake system. Over time, heat cycles and road debris cause factory clips and springs to lose tension and accumulate corrosion, leading to uneven pad wear, brake drag, and unwanted noise. This kit replaces worn OE components to ensure smooth brake pad movement and consistent caliper performance.

• Low coefficient of friction ensures smooth pad sliding and prevents binding.
• High heat and chemical resistance maintains component tension under extreme operating conditions.
• Corrosion-resistant finish protects against road salts and moisture for an extended service life.
• Designed for precise fitment to allow for easy assembly and removal during maintenance.

• Manufacturer: Dynamic Friction Company (DFC)
• Part Number: 340-59015
• Position: Rear
• Hardware Type: Premium Disc Brake Hardware

Fits select 2016-2018 Ford Focus RS and 2021-2025 Ford Mustang Mach-E. This DFC Premium Front Brake Hardware Kit (340-54084) is engineered to replace worn OE hardware, restoring proper pad movement and preventing uneven wear or brake noise.

Built to withstand extreme braking environments, this kit utilizes materials with a low coefficient of friction and high thermal stability to maintain performance under heavy load. The corrosion-resistant finish ensures durability against road salts and chemicals, facilitating easier maintenance and removal during future services.

• Direct replacement for factory front brake hardware
• Low coefficient of friction for smooth caliper/pad operation
• High heat and chemical resistance for long-term reliability
• Superior corrosion resistance to prevent binding
• Designed for precise fitment and easy assembly
• Manufacturer Part Number: 340-54084

Fits 2016-2020 Ford Mustang Shelby GT350 and Shelby GT350R.

Proper brake performance on high-performance vehicles like the GT350 depends on more than just the pads and rotors. This DFC Premium Front Hardware Kit (MPN 340-54082) provides the essential components needed to ensure smooth pad movement and consistent pressure across the rotor face. By replacing worn or fatigued hardware, you eliminate brake drag and premature pad wear caused by sticking components.

• Low Coefficient of Friction: Engineered to facilitate smooth pad sliding and retraction, reducing noise and heat buildup.
• Extreme Durability: Designed with high heat and chemical resistance to withstand the rigorous thermal cycles of performance driving.
• Corrosion Resistance: Specialized coating protects against road salts and environmental debris to prevent seizing.
• Simplified Maintenance: Precision manufacturing ensures easy assembly and removal during your next brake service.

Fits 2004-2008 Ford F-650 and F-750 medium-duty trucks (Front or Rear positions).

The DFC 340-54074 Premium Hardware Kit is engineered to restore your braking system to peak efficiency. Over time, heat and environmental exposure cause OE hardware to lose tension and accumulate corrosion, leading to sticking pads, uneven wear, and noise. This kit replaces those critical components to ensure smooth caliper movement and consistent clamping pressure.

• Part Number: 340-54074
• Optimized Movement: Engineered with a low coefficient of friction to facilitate smooth pad sliding and easy assembly/removal.
• Extreme Durability: High heat resistance ensures the hardware maintains its structural integrity under the heavy loads and thermal stress typical of F-650 and F-750 applications.
• Environmental Protection: Advanced chemical and corrosion resistance protects components against road salt, moisture, and brake cleaners.
• Position: Compatible with both front and rear axle applications for the specified vehicles.

The DFC 340-54068 Premium Brake Hardware Kit fits select 2018-2025 Dodge Durango, Ram 2500/3500, and Volkswagen Atlas and Atlas Cross Sport models. Replacing worn hardware is essential to ensuring smooth pad movement, preventing uneven wear, and maintaining consistent caliper performance over the life of the brakes.

This hardware kit is engineered to withstand the extreme environment of the wheel well. Each component is manufactured with high heat and chemical resistance to prevent the loss of tension that leads to brake drag or noise. The low coefficient of friction ensures that brake pads slide freely, while the corrosion-resistant finish protects against road salts and environmental debris.

• Manufacturer Part Number: 340-54068
• Optimized for low coefficient of friction to ensure quiet, smooth operation
• High heat and chemical resistance prevents hardware fatigue and failure
• Durable coating provides superior corrosion resistance for long-term reliability
• Designed for easy assembly and removal during routine maintenance

Fits select 2012-2021 Ford F-150, Expedition, and Lincoln Navigator models. This DFC Rear Premium Hardware Kit (MPN 340-54065) is engineered to replace worn or corroded brake clips and springs, ensuring proper brake pad movement and consistent pressure across the rotor surface.

As a critical component of a complete brake service, this hardware kit uses high-quality materials to provide a low coefficient of friction, which prevents pad binding and reduces premature wear. The components are specifically treated for superior corrosion and chemical resistance, maintaining their integrity in harsh undercar environments. These hardware pieces are designed for high heat resistance, preventing the tension loss common in lower-grade components that can lead to brake drag or noise.

• Precision Fitment: Replaces factory hardware for a seamless installation.
• Durability: High heat and chemical resistance for long service life.
• Performance: Low friction design ensures smooth pad retraction and engagement.
• Corrosion Resistance: Specialized finish prevents rust and oxidation.
• MPN: 340-54065

Fits select 2006-2019 Ford Explorer, Flex, Taurus, Lincoln MKS, MKT, and Mercury Mountaineer models. This DFC Premium Front Brake Hardware Kit (MPN 340-54064) is engineered to restore original equipment braking performance and ensure smooth pad operation. Over time, factory hardware loses tension due to heat cycles or becomes pitted with corrosion, leading to uneven pad wear, annoying brake squeal, or increased drag.

This kit provides a direct-fit solution using high-quality materials designed for the high-temperature environment of the braking system. The components feature a low coefficient of friction to facilitate proper pad movement and retraction, while specialized coatings offer superior resistance to chemicals and road salt. Replacing your hardware during every pad change is a critical step for professional-grade brake service.

• Direct replacement for manufacturer part number 340-54064
• Low coefficient of friction for consistent pad sliding and reduced noise
• High heat resistance maintains spring tension under heavy braking loads
• Corrosion and chemical resistant for extended service life
• Designed for easy assembly and removal during routine maintenance

Fits select 2008-2025 Dodge, Ford, Lincoln, and Ram vehicles, including F-150, E-Series, Navigator, and Ram 2500/3500.

The DFC 340-54061 Premium Brake Hardware Kit is engineered to restore the precision and performance of your vehicle's braking system. Over time, original hardware can lose its tension or become seized due to corrosion, leading to uneven pad wear, excessive noise, and reduced braking efficiency. This kit provides the critical components needed for a professional brake service, ensuring smooth caliper movement and proper pad alignment to prevent drag and vibration.

• Low coefficient of friction ensures smooth pad movement within the caliper bracket
• Exceptional corrosion and chemical resistance for long-term durability in harsh environments
• High heat resistance maintains critical component tension under extreme braking conditions
• Precision-engineered for easy assembly and removal during future maintenance
• Manufacturer Part Number: 340-54061

Fits select 2008-2025 Chevrolet Suburban 3500 HD, Silverado, and Express; Ford E-Series; GMC Sierra and Savana; and Nissan NV and Titan XD (see fitment table for details).

The DFC Premium Front/Rear Brake Hardware Kit 340-54060 is engineered to restore the efficiency and performance of your vehicle's braking system. Over thousands of miles, brake hardware is subjected to extreme heat cycles and road debris, leading to fatigue, corrosion, and loss of tension. This kit replaces worn components to ensure smooth caliper movement, proper pad retraction, and reduced noise and drag.

• Precision Fit: Replaces OE hardware to maintain proper clearances and prevent uneven pad wear.
• High Heat Resistance: Manufactured to withstand the extreme temperatures generated during heavy-duty towing and hauling.
• Corrosion Resistance: Treated for long-term durability against moisture, chemicals, and road salts.
• Smooth Operation: Features a low coefficient of friction for consistent, quiet braking performance.
• Complete Installation: Designed for easy assembly and removal during routine brake service.
• Manufacturer Part Number: 340-54060

Fits select 2005-2024 Chrysler Aspen, Dodge Dakota/Durango/Ram 1500, Ford F-250/F-350 Super Duty, Jeep Wrangler, Mitsubishi Raider, and Ram 1500/Classic models.

Ensure optimal braking performance and longevity with the DFC Premium Brake Hardware Kit (MPN: 340-54057). This professional-grade kit is designed to replace fatigued or corroded factory hardware, restoring smooth movement to your brake pads and preventing uneven wear or noise. Worn hardware is a leading cause of brake drag and premature pad failure; this kit provides a direct-fit solution to maintain consistent caliper operation.

Every component is engineered to withstand the extreme environment of the wheel well, featuring high resistance to heat and road chemicals. The low coefficient of friction ensures that brake pads retract freely from the rotor after every stop, reducing drag and improving fuel efficiency.

• Direct-fit replacement for original front and rear brake hardware
• High heat resistance prevents component fatigue during heavy braking
• Corrosion-resistant finish for durability in harsh weather conditions
• Chemical-resistant materials protect against road salt and cleaners
• Low friction design for easy assembly and smooth pad movement
• Manufacturer Part Number: 340-54057

Fits select 1993-2010 Ford, Jeep, Lincoln, and Mercury models including Explorer, Sport Trac, Wrangler, Liberty, and Windstar (3.0L).

The DFC Rear Premium Hardware Kit is engineered to restore your braking system to factory-level operation. Over time, brake hardware is subjected to extreme heat cycles and environmental debris that cause springs to lose tension and clips to corrode. This degradation leads to uneven pad wear, increased noise, and compromised safety. Replacing your hardware during every brake service ensures proper pad alignment and smooth caliper movement.

• Optimized Performance: Features a low coefficient of friction to facilitate smooth component movement and pad retraction.
• Extreme Durability: Engineered with high heat and chemical resistance to maintain spring tension and structural integrity under heavy use.
• Corrosion Resistance: Built to withstand road salt and moisture, preventing premature rust-out.
• Direct Fit: Designed for easy assembly and removal, replacing worn factory components without modification.
• Manufacturer Part Number: 340-54043

This DFC Rear Premium Hardware Kit is engineered to restore the proper movement and performance of your rear brake assembly. Replacing worn or corroded hardware is critical to preventing brake drag, uneven pad wear, and annoying brake noise. This kit provides a comprehensive solution for professional-grade brake service.

Fits select 2013-2026 Acura, Alfa Romeo, Buick, Ford, Honda, Lincoln, and Subaru vehicles including Honda Civic, Accord, Ford Fusion, and Subaru Outback.

• Precision Engineering: Designed to meet or exceed original equipment standards for fit and function.
• Durability: Features high heat and chemical resistance to withstand extreme operating conditions.
• Protective Finish: Excellent corrosion resistance ensures long service life and prevents premature seizing.
• Low Friction: Low coefficient of friction allows for smooth caliper and pad movement, ensuring consistent braking feel.
• Simplified Maintenance: Engineered for easy assembly and removal during your next brake job.
• Manufacturer Part Number: 340-54029

Fits select 2021-2026 Acura ZDX, Cadillac Escalade, LYRIQ, OPTIQ, XT5, XT6, and Chevrolet Blazer EV, Silverado 1500, Suburban, and Tahoe.

The DFC 340-47080 Front Premium Hardware Kit is engineered to restore factory-level braking performance and eliminate unwanted caliper noise. This kit replaces worn-out clips and springs that have lost their tension or suffered from surface corrosion, ensuring proper pad alignment and smooth piston retraction for consistent pedal feel.

• Low Coefficient of Friction: Optimizes pad movement within the bracket for even wear.
• High Heat Resistance: Maintains structural integrity and spring tension under heavy braking cycles.
• Corrosion and Chemical Resistance: Treated to withstand road salts, moisture, and brake cleaners.
• Precise Fitment: Designed for easy assembly and removal during routine brake service.
• MPN: 340-47080

Fits select 2019-2026 Cadillac Escalade, Escalade ESV, and VISTIQ, Chevrolet Silverado 1500, Suburban, and Tahoe, and GMC Sierra 1500 and Yukon.

The DFC Premium Front Brake Hardware Kit (340-47074) is engineered to restore factory-fresh braking performance by replacing worn or fatigued clips and sliders. Often overlooked during a pad swap, old hardware is a leading cause of brake drag, uneven wear, and annoying squeal. This kit ensures proper pad movement and consistent pressure across the rotor face.

Manufactured with a focus on longevity, these components feature specialized coatings to provide a low coefficient of friction and superior resistance against the elements. Whether you are performing a routine service on a Sierra 1500 or maintaining a Cadillac Escalade, this hardware kit provides the reliability needed for heavy-duty truck and SUV applications.

• Part Number: 340-47074
• Position: Front
• Corrosion Resistance: Engineered to withstand road salts and moisture.
• High Heat Resistance: Maintains structural integrity under heavy braking temperatures.
• Chemical Resistance: Resistant to brake fluid and cleaners.
• Low Friction: Ensures smooth pad retraction and movement.