Fits select 2012-2024 Hyundai and Kia models, including Kona, Sonata, Veloster, Forte, Optima, and Soul (2.0T).

This DFC Rear Premium Hardware Kit (MPN 340-03034) provides the critical components necessary to restore your vehicle's braking performance and ensure smooth caliper operation. Often overlooked during a pad change, replacing worn hardware is essential to prevent brake drag, uneven pad wear, and unwanted noise. Each component is engineered to meet or exceed original equipment standards for fit and function.

• Manufacturer Part Number: 340-03034
• Low Coefficient of Friction: Ensures smooth movement of brake pads within the caliper bracket.
• High Heat Resistance: Designed to maintain structural integrity under the extreme temperatures of heavy braking.
• Corrosion & Chemical Resistance: Treated to withstand road salts, moisture, and automotive chemicals for a longer service life.
• Easy Installation: Designed for direct fitment to facilitate quick assembly and removal during maintenance.

Fits select 2002-2018 Audi Q7, Mercedes-Benz G550 4x4, Porsche 911, Boxster, Carrera GT, Cayenne, Cayman, and Volkswagen Touareg.

Maintain the performance and safety of your braking system with the DFC Premium Hardware Kit. Over time, extreme heat cycles and environmental exposure cause factory brake hardware to fatigue, leading to uneven pad wear, unwanted noise, and sticking calipers. This kit replaces worn OE-style clips and pins to ensure smooth pad movement and consistent pressure across the rotor face.

Engineered for professional-grade reliability, the components in the 340-02004 kit are designed to withstand the high temperatures and harsh chemical environments common in performance braking systems.

• Reduced Friction: Engineered with a low coefficient of friction to prevent brake drag and ensure rapid pad retraction.
• Corrosion Resistance: Treated to resist road salt and moisture, preventing the hardware oxidation that leads to seized brake components.
• High Heat & Chemical Resistance: Maintains structural integrity under aggressive driving conditions and resists degradation from brake fluids.
• Direct Fit: Designed to exact factory tolerances for straightforward installation and removal during service.
• Part Number: 340-02004

Fits select 2013-2018 Land Rover Range Rover and 2014-2017 Range Rover Sport models.

Maintain the safety and performance of your braking system with the Brembo A00478 Front Brake Pad Wear Sensor. Designed to integrate seamlessly with your vehicle's electronic monitoring system, this sensor tracks brake pad thickness and triggers a dashboard warning when the friction material reaches its minimum service limit. This proactive alert ensures you never compromise stopping power or damage your rotors due to worn-out pads.

Manufactured to strict OE specifications, this Brembo sensor features high-quality wiring and connectors engineered to withstand the extreme heat and harsh road conditions common in the wheel well environment. For optimal reliability, Brembo specialists recommend replacing the wear sensor every time you install a new set of brake pads.

• Manufacturer Part Number: A00478
• Direct-fit replacement for the original electronic wear sensor
• Heat-resistant wiring and durable connectors ensure signal integrity
• Triggers vehicle warning system when pads reach minimal thickness
• Essential for maintaining factory brake service intervals

Fits select 2012-2021 BMW 228i, 230i, 320i, 328i, 330i, 335i, 340i, 428i, 430i, 435i, 440i, M2, M3, and M4 models.

Maintain the integrity of your BMW's braking system with this Brembo Rear Brake Pad Wear Sensor. Engineered to meet exact OE specifications, this electronic sensor monitors brake pad material thickness and triggers a dashboard warning once the pads reach their service limit. This ensures you are alerted to the need for maintenance before metal-to-metal contact can damage your rotors.

Brembo utilizes high-quality wiring and connectors specifically designed to withstand the high temperatures and harsh environmental conditions found in the wheel well. For consistent performance and to ensure the dash warning system is properly reset, Brembo recommends installing a new wear sensor every time you replace your rear brake pads.

• Direct replacement for the factory rear brake wear sensor
• Designed to OE specifications for plug-and-play fitment
• Heat-resistant wiring and connectors for long-term durability
• Critical for maintaining factory brake maintenance alerts
• Manufacturer Part Number: A00474

Fits select 2012-2021 BMW 2, 3, and 4 Series, including M2, M3, M4, and ActiveHybrid 3 models.

Maintain the integrity of your braking system with the Brembo A00473 Front Brake Pad Wear Sensor. Engineered to meet strict OE specifications, this electronic sensor triggers a dashboard warning once brake pads reach minimum thickness, preventing rotor damage and ensuring predictable stopping power. Brembo recommends replacing the wear sensor during every pad change to ensure continued reliability and to prevent false readings from heat-cycled components.

• Direct replacement for the factory front brake wear sensor
• High-quality wiring and connectors built to withstand extreme brake temperatures
• Weather-sealed housing resistant to harsh road conditions
• Maintains OE-level communication with the vehicle's electronic monitoring system
• Manufacturer Part Number: A00473

Fits 2011-2018 Porsche Cayenne, 2011-2016 Porsche Panamera, and 2011-2017 Volkswagen Touareg models including Hybrid, S, Turbo, and TDI trims.

The Brembo A00452 Rear Brake Pad Wear Sensor is a critical component for maintaining your vehicle's braking safety. This electronic sensor is designed to monitor the remaining friction material on your rear brake pads. When the pads reach their minimum thickness, the sensor completes a circuit to trigger a dashboard warning light, providing advance notice that a brake service is required.

Engineered to meet OE specifications, these sensors ensure precise fitment and reliable performance. Each sensor features high-quality wiring and connectors designed to withstand the extreme heat cycles and harsh under-car environments typical of high-performance braking systems. Brembo recommends replacing the wear sensors every time brake pads are changed to ensure continued system accuracy.

• Manufacturer Part Number: A00452
• Position: Rear
• Construction: High-heat resistant wiring and durable electrical connectors
• Compliance: Manufactured to OE specifications for exact fit and function
• Installation: Direct replacement for the factory electronic wear indicator

Fits select 2009-2023 Mercedes-Benz models including A-Class, C-Class, E-Class, G-Class, S-Class, SL-Class, and AMG GT, CLA, CLS, GLA, GLB, GLC, GLE, GLS, and EQS series.

Maintain the integrity of your Mercedes-Benz braking system with the Brembo A00353 electronic brake pad wear sensor. Designed to match OE specifications precisely, this sensor monitors the remaining thickness of your friction material and triggers a dashboard warning when pads reach their minimum service limit. This prevents rotor damage and ensures consistent stopping performance by alerting the driver before the pads are completely exhausted.

Built to withstand the extreme environment of the wheel well, this sensor features high-quality wiring and connectors engineered to resist thermal cycling and harsh weather conditions. To ensure the reliability of your brake monitoring system, Brembo recommends replacing the wear sensor every time new brake pads are installed.

• Manufacturer Part Number: A00353
• Direct replacement for a factory-style fit and function
• Electronic sensor completes the circuit when pad wear reaches the limit
• High-heat resistant wiring and durable connector housing
• Designed for front or rear applications depending on specific vehicle configuration

Fits select 2003-2019 Mercedes-Benz E, G, GL, GLE, GLS, ML, R, and S-Class models.

The Brembo A00286 Brake Pad Wear Sensor is a critical component for maintaining your vehicle's braking system integrity. This electronic sensor is designed to monitor the remaining friction material on your brake pads, completing a circuit and triggering a dashboard warning light once the pads reach a minimum thickness. This ensures you have ample time to schedule a pad replacement before the backing plates contact the rotors.

• Direct Replacement: Built to exact OE specifications to ensure the same fit, form, and function as the factory sensor.
• Heat Resistance: Features high-quality wiring and connectors engineered to withstand the extreme thermal cycles and harsh environmental conditions found in the wheel well.
• Critical Maintenance: Brembo recommends replacing the wear sensor with every brake pad change, as the sensors are often damaged or brittle from heat soak and road debris.
• Versatile Application: Depending on the vehicle configuration, this sensor is designed for either front or rear axle fitment.
• Manufacturer Part Number: A00286

Fits select 2003-2021 Mercedes-Benz models, including AMG GT, C-Class, E-Class, G-Class, S-Class, SL-Class, and Maybach series.

The Brembo A00277 Front Brake Pad Wear Sensor is a critical component for maintaining your vehicle's braking performance and safety. This electronic sensor is engineered to monitor the remaining friction material on your brake pads, triggering a dashboard warning signal once the pads reach their minimum thickness. By providing an accurate alert before the pads are fully depleted, this sensor helps prevent rotor damage caused by metal-to-metal contact.

Manufactured to strict OE specifications, this sensor ensures seamless communication with your vehicle's onboard computer. Brembo utilizes high-quality wiring and heavy-duty connectors specifically designed to withstand the extreme heat and harsh environmental conditions found within the wheel well. For optimal reliability, it is highly recommended to replace the wear sensor during every brake pad service.

• Direct replacement for the factory electronic wear sensor
• Maintains original equipment (OE) fit, form, and function
• High-heat resistant wiring and durable connectors for long-term reliability
• Critical for timely brake system maintenance and rotor protection
• Position: Front
• Manufacturer Part Number: A00277

Maintain the integrity of your braking system with the Brembo A00274 front brake pad wear sensor. Designed to monitor the remaining friction material on your brake pads, this electronic sensor triggers a dashboard warning when pads reach minimum thickness, ensuring you never compromise stopping power or damage your rotors.

Fits select 2000-2021 Mercedes-Benz models including C-Class, E-Class, S-Class, SL, and AMG GT series. Brembo strongly recommends replacing the wear sensor with every brake pad service to ensure accurate electronic monitoring.

• OE Precision: Manufactured to original equipment specifications for seamless integration with the vehicle's onboard diagnostics.
• Durable Construction: High-quality wiring and connectors engineered to withstand extreme braking temperatures and harsh road conditions.
• Reliable Monitoring: Direct replacement for a worn or triggered factory sensor to restore pad life warnings.
• Manufacturer Part Number: A00274
• Position: Front

The Brembo PISTA D-Bobbin Hardware Pack (MPN 915503) provides the critical mounting interface required for high-performance semi-floating brake rotors. Specifically engineered for racing applications, this 10-hole hardware kit enables controlled thermal expansion of the brake disc under high heat. This semi-floating design reduces mechanical stress on the rotor hat, significantly lowering the risk of disc warping and cracking during aggressive track use.

• Series: Brembo PISTA
• Hardware Type: D-Bobbin Semi-Floating System
• Mounting Specification: 10-Hole Configuration
• Flange Size: 8mm
• Manufacturer Part Number: 915503

This professional-grade hardware pack ensures precise rotor alignment and consistent pedal feel by maintaining the necessary clearances between the rotor ring and the bell. It is an essential component for refreshing or assembling Brembo racing brake systems.

The Brembo PISTA D-Bobbin Semi-Floating Hardware Pack is a professional-grade component set designed for high-performance racing brake systems. This hardware kit is specifically engineered to accommodate 10-hole mounting patterns on rotors with a 6mm flange thickness, allowing the disc to expand and contract freely under extreme thermal stress.

• Manufacturer Part Number: 915502
• Series: Brembo PISTA
• Bobbin Design: D-Bobbin (Semi-Floating)
• Fitment: 10-Hole Mounting Discs
• Flange Specification: 6mm
• Application: Track and Competition Brake Assemblies

By utilizing a semi-floating D-bobbin configuration, this kit reduces the risk of rotor warping and ensures a consistent pedal feel through multiple heat cycles. This pack includes the necessary precision hardware to properly mount a single disc to its corresponding bell or hat.

Fits select 2010-2015 Chevrolet Camaro and 2014-2019 Chevrolet Corvette models equipped with a 15-inch conversion kit.

Designed specifically as the brake component for BMR 15-inch wheel conversion kits, these calipers provide the critical clearance required to run smaller diameter drag racing wheels. These calipers allow you to downsize from factory wheel diameters to a 15-inch wheel setup, a necessity for serious drag racing applications where maximum sidewall flex and traction are required.

• Designed exclusively for BMR 15-inch wheel conversion kits
• Provides necessary clearance for 15-inch drag wheels
• Durable red finish for corrosion resistance and aesthetics
• Direct replacement or individual component for conversion kit maintenance
• Manufacturer Part Number: DBK355

Fits 2007-2018 Jeep Wrangler JK models. Artec Industries provides a critical solution for maintaining factory electronic functionality during heavy-duty axle swaps. This 52-tooth tone ring is engineered specifically for 1-ton 14-bolt conversions utilizing factory GM disc brakes.

When swapping a 14-bolt axle into a JK, maintaining the factory ABS and traction control systems is essential for both safety and speedometer accuracy. This precision-cut tone ring provides the exact pulse count required by the JK's computer. It is designed to withstand the rigors of off-road use while ensuring reliable signal pickup for your vehicle's speed sensors.

• Specifically designed for GM 14-bolt factory disc brake configurations
• Precision-cut 52-tooth count for accurate signal pulse
• Integrates with factory Jeep JK ABS and speedometer systems
• Essential component for 1-ton axle conversions
• Manufacturer Part Number: BB1430

Fits 2007-2018 Jeep Wrangler JK models performing a rear axle swap with a 1999-2004 Ford Sterling 10.5 1-ton axle.

The Artec Industries 60 Tooth ABS Kit (BB1060) is an essential component for off-roaders looking to maintain factory electronic functionality after a heavy-duty axle swap. The Jeep JK computer requires a specific 60-tooth count to correctly process wheel speed data; this kit provides the necessary tone rings to allow the factory ABS, Electronic Stability Program (ESP), and cruise control to function without triggering dashboard codes or limp mode.

• Replaces standard tone rings to provide the correct 60-tooth count for JK electronics
• Specifically engineered for 1999-2004 Sterling 10.5 rear axles
• Ensures proper operation of ABS and traction control systems
• Heavy-duty steel construction for durability in off-road environments
• Includes precision-cut tone rings and mounting hardware
• Manufacturer Part Number: BB1060

Fits select 2010-2022 Chevrolet Silverado, Suburban, and Tahoe; Ford F-150; GMC Sierra and Yukon; and Toyota Tacoma.

Maintain the performance and reliability of your high-performance braking system with the Alcon Front Pad Retainer Pin Kit. This kit is a direct replacement for the hardware found in Alcon 6-piston calipers, specifically those associated with part number PNS4415X. Over time, heat cycles and environmental exposure can fatigue retainer springs and corrode pins, leading to uneven pad wear or annoying brake chatter.

This kit provides the essential components to secure your brake pads properly within the caliper housing, ensuring consistent pad retraction and quiet operation during daily driving or heavy-duty use.

• Complete replacement set for front 6-piston Alcon calipers
• Includes precision-machined pad retainer pins
• Includes anti-rattle tension spring to eliminate pad movement and noise
• Direct fit for Alcon caliper PN PNS4415X hardware
• Manufacturer Part Number: PKR4415X540KS

This Alcon Front Brake Bracket Kit (BSK4415X618) is an essential component for upgrading the braking system on your 2021 and newer Ford F-150 (excluding Raptor models). Engineered specifically by Alcon, this kit provides the precise mounting solution required to install larger, more powerful Alcon front brake calipers and rotors.

Designed for a direct-fit application, these brackets ensure accurate alignment and secure attachment of Alcon's performance braking components to your F-150's factory spindle. This allows you to leverage the full benefits of an Alcon brake upgrade, including improved stopping power, enhanced thermal management, and consistent pedal feel under demanding conditions.

• Vehicle Fitment: 2021+ Ford F-150 (Excluding Raptor models)
• Position: Front axle
• Manufacturer Part Number: BSK4415X618
• Function: Enables installation of Alcon performance front brake calipers and rotors