Fits select 2019-2026 Infiniti, Lexus, Mitsubishi, Nissan, Subaru, and Toyota vehicles. This DFC Premium Rear Brake Hardware Kit is engineered to restore factory-level braking performance by replacing worn, fatigued, or corroded caliper components. Over time, brake hardware loses its tension and becomes subject to extreme heat cycles, leading to uneven pad wear, brake drag, or excessive noise.

This kit features high-quality materials designed to maintain precise tolerances and ensure smooth brake pad movement within the caliper bracket. By reducing drag and ensuring proper pad retraction, this hardware helps extend the life of your pads and rotors while maintaining a quiet, consistent pedal feel.

• Manufacturer Part Number: 340-76087
• Low coefficient of friction for smooth caliper operation and reduced drag
• High heat resistance ensures components maintain tension under heavy braking loads
• Superior corrosion resistance protects against road salts and environmental debris
• Excellent chemical resistance for durability against brake fluids and cleaners
• Engineered for easy assembly and removal during routine brake service

Fits select 2007-2024 Toyota Camry, Avalon, Matrix, Lexus ES300h, ES350, and Pontiac Vibe.

Restore proper caliper function and ensure consistent braking performance with the DFC Rear Premium Hardware Kit. Brake hardware is often overlooked during pad replacement, yet worn clips and springs are a leading cause of brake drag, uneven pad wear, and unwanted noise. This kit replaces fatigued or corroded OE components with high-quality hardware designed to withstand the intense heat cycles and environmental stress of the braking system.

• Precision Engineering: Designed for easy assembly and removal, ensuring a perfect fit with factory calipers.
• Advanced Materials: Features high heat and chemical resistance to maintain tension and integrity over the life of the brake pads.
• Corrosion Protection: Built to resist road salt and moisture, preventing pad binding and seizing.
• Smooth Operation: Low coefficient of friction allows brake pads to slide freely within the bracket for even engagement.
• Manufacturer Part Number: 340-76085

Fits select 2018-2026 Lexus (ES250, ES300h, ES350, UX-Series) and Toyota (Avalon, C-HR, Camry, Corolla, Prius, RAV4, Venza) models.

This DFC Front Premium Hardware Kit is engineered to restore your vehicle's braking system to optimal performance. Over time, heat and environmental exposure cause factory hardware to lose its tension, leading to uneven pad wear, increased noise, and poor caliper response. Replacing hardware during every brake service ensures your pads move freely within the bracket, extending the life of your friction materials and maintaining consistent pedal feel.

• Low coefficient of friction for smooth caliper operation and noise reduction
• High heat resistance prevents hardware fatigue under heavy braking conditions
• Superior corrosion and chemical resistance for long-term durability in harsh environments
• Designed for easy assembly and removal to streamline your next brake service
• Direct-fit replacement for manufacturer part number: 340-76084

Fits select 1981-2024 Toyota 4Runner, FJ Cruiser, Land Cruiser, Pickup, Sequoia, Cressida, and Lexus GX460, GX470, and LX450.

The DFC 340-76079 Premium Brake Hardware Kit is engineered to restore your vehicle's braking system to factory-level performance and reliability. Replacing hardware during every brake service is critical to ensure proper pad movement and prevent common issues such as uneven pad wear, excessive noise, or brake drag. This kit is designed with a low coefficient of friction to facilitate smooth sliding of the pads within the caliper bracket.

• Thermal Stability: High heat resistance ensures the hardware maintains its tension and integrity under heavy braking loads.
• Corrosion Resistance: Engineered to withstand harsh environments, including road salt and chemical exposure, preventing rust-related binding.
• Precision Fit: Designed for easy assembly and removal, mirroring OE specifications for a direct-fit installation.
• Application: Complete kit suitable for front and rear brake service.
• Manufacturer Part Number: 340-76079

Fits select 2010-2024 Lexus GX460 and Toyota 4Runner models.

The DFC Premium Hardware Kit (MPN 340-76074) is essential for maintaining consistent braking performance and reducing noise during front brake services. Over time, repeated heat cycles and road grime cause OE hardware to lose tension or corrode, leading to uneven pad wear and sticking. This premium kit is engineered to provide a low coefficient of friction for smooth pad travel and superior chemical and heat resistance.

• Designed for easy assembly and removal during brake pad replacement
• Constructed for high heat and chemical resistance to withstand extreme braking conditions
• Excellent corrosion resistance to prevent seizing and hardware fatigue
• Ensures proper brake pad alignment and tension for quiet operation
• Manufacturer Part Number: 340-76074

Fits select 2010-2026 Lexus and Toyota models, including Camry, Corolla, RAV4, Highlander, Sienna, and RX350.

The DFC 10-26 Rear Premium Hardware Kit (MPN: 340-76072) is engineered to restore factory-level performance and quiet operation to your vehicle's braking system. Over time, brake hardware loses tension due to extreme heat cycles and corrosion, leading to uneven pad wear, drag, and noise. This kit replaces worn OE components to ensure proper pad movement and alignment within the caliper bracket.

• Low Coefficient of Friction: Minimizes resistance to ensure smooth pad engagement and retraction.
• Corrosion Resistance: Treated to withstand road salt, moisture, and chemical exposure for long-term durability.
• High Heat Resistance: Maintains structural tension even under the high temperatures generated during heavy braking.
• Direct Fit: Designed to replace factory hardware for easy assembly and removal during service.
• Manufacturer Part Number: 340-76072

Fits select 2008-2026 Lexus, Toyota, and Subaru models (including RX350, Highlander, Sienna, and Solterra). This DFC Front Premium Brake Hardware Kit is engineered to restore factory-level braking performance by replacing worn or corroded OE clips, springs, and pins. High-quality hardware is essential for ensuring smooth brake pad movement, preventing uneven wear, and eliminating annoying brake chatter or drag.

Constructed for durability in harsh environments, this kit features a low coefficient of friction for consistent pad retraction and easy installation. Each component is treated for superior resistance against chemical exposure, high thermal loads, and corrosion, maintaining the integrity of your braking system over time.

• Manufacturer Part Number: 340-76068
• Position: Front
• Low coefficient of friction for smooth operation
• High heat and chemical resistance
• Corrosion-resistant finish for long service life
• Designed for easy assembly and removal during service

Fits select 2007-2022 Toyota Tundra, Sequoia, Land Cruiser, and Lexus LX570. DFC Rear Premium Hardware Kits are engineered to restore original braking performance by replacing worn, fatigued, or corroded hardware that often leads to uneven pad wear and increased brake noise.

Constructed to withstand the intense thermal cycles of the braking system, these components feature high heat and chemical resistance. The low coefficient of friction ensures smooth caliper and pad movement for consistent pedal feel, while the corrosion-resistant finish prevents seizing for easier assembly and future removal.

• Direct replacement for factory rear brake hardware components
• Low coefficient of friction for optimal pad movement
• Engineered for high heat, chemical, and corrosion resistance
• Helps eliminate brake squeal and ensures even pad wear
• Manufacturer Part Number: 340-76067

Fits select 2007-2022 Toyota Tundra, Sequoia, Land Cruiser, and Lexus LX570.

This DFC Premium Hardware Kit is engineered to restore factory-level braking performance by replacing worn, fatigued, or corroded brake components. Proper hardware is essential for ensuring pads slide freely within the caliper, preventing uneven wear, drag, and annoying brake squeal. Designed to withstand the harsh environment of the wheel well, this kit provides the reliable tension and surface finish needed for smooth pedal response.

• Low coefficient of friction for consistent brake pad movement and release
• High heat resistance ensures clips maintain their spring tension under extreme braking
• Corrosion and chemical resistance prevents seizing and premature failure in salted-road conditions
• Designed for precise fitment and easy assembly/removal during routine service
• Manufacturer Part Number: 340-76066

Fits select 2007-2018 Lexus ES300h and ES350, and Toyota Avalon and Camry models.

The DFC Front Premium Hardware Kit (MPN 340-76062) is designed to restore factory-level performance and quiet operation to your front braking system. Over time, original equipment clips and springs lose their tension due to constant heat cycles and exposure to the elements, leading to uneven pad wear, dragging, and brake squeal. This premium kit ensures your brake pads move freely within the caliper bracket, promoting even wear and extending the life of your pads and rotors.

• Low Coefficient of Friction: Specialized coatings ensure smooth pad sliding and consistent engagement.
• Corrosion and Chemical Resistance: Built to withstand road salt, moisture, and harsh automotive chemicals for long-term durability.
• High Heat Resistance: Engineered to maintain structural integrity and spring tension even under extreme braking temperatures.
• Precision Engineering: Designed for easy assembly and removal, matching the exact tolerances of the factory hardware for a secure fit.

Replacing your brake hardware is a critical step during every pad service to prevent premature component failure and maintain a responsive, vibration-free pedal feel.

Fits select 2000-2025 Toyota (Tacoma, Tundra, 4Runner, Sequoia, FJ Cruiser), Lexus GX470, and Hummer H3/H3T models.

This DFC Premium Front Brake Hardware Kit is engineered to restore factory-level braking performance and ensure smooth pad movement within the caliper. Over time, brake hardware is subjected to extreme heat cycles and road debris, leading to fatigue, corrosion, and brake drag. This kit replaces worn OE components to prevent premature pad wear and eliminate unwanted noise.

• Low Coefficient of Friction: Specialized coating ensures smooth caliper sliding and proper pad retraction.
• Corrosion Resistance: Built to withstand harsh road salts and moisture, preventing binding and seize-ups.
• High Heat & Chemical Resistance: Maintains structural integrity under aggressive braking temperatures and resists degradation from brake fluids or cleaners.
• Direct OE Replacement: Designed for easy assembly and removal, meeting the precise tolerances of the original equipment.
• Manufacturer Part Number: 340-76057

Fits select 2006-2022 Lexus, Toyota, Mazda, Scion, and Pontiac models. This DFC Premium Hardware Kit is engineered to restore your braking system to factory-level performance by replacing worn or corroded caliper hardware.

Proper hardware is essential for ensuring that brake pads slide freely, which prevents uneven wear, noise, and brake drag. This kit features high-quality materials designed to withstand the harsh environment of the wheel well, including exposure to high temperatures and road chemicals.

• Manufacturer Part Number: 340-76026
• Low Coefficient of Friction: Ensures smooth pad movement and consistent engagement.
• High Heat Resistance: Maintains structural integrity under heavy braking loads.
• Corrosion & Chemical Resistance: Treated to resist road salt and automotive fluids.
• Easy Installation: Designed for direct fitment to ensure straightforward assembly and removal.

Fits select 2006-2025 Lexus GS, IS, and RC models (GS200t, GS300, GS350, GS430, GS450h, GS460, IS200t, IS300, IS350, IS500, RC200t, RC300, and RC350).

Restore the responsiveness and quiet operation of your Lexus braking system with the DFC 340-75006 Premium Front Brake Hardware Kit. Over time, factory brake clips and pins lose their tension due to constant heat cycles and road debris, leading to uneven pad wear, excessive noise, and dragging. This premium kit replaces worn OE components to ensure pads slide freely and retract properly within the caliper.

Engineered for professional-grade performance, this kit features a low coefficient of friction for smooth pad movement and is constructed to withstand the high thermal loads of performance driving. The specialized coatings provide superior chemical and corrosion resistance, ensuring the hardware remains easy to remove during future service intervals.

• Replaces worn or damaged OE front brake hardware (MPN: 340-75006)
• Constructed for high heat and chemical resistance to prevent seizing
• Ensures even brake pad pressure and reduces harmonic vibration/noise
• Low-friction design facilitates easy assembly and removal
• Direct fit for Lexus GS, IS, and RC performance calipers

Fits select 1994-2026 Audi, Chrysler, Daewoo, Ford, Lincoln, Mazda, Mercedes-Benz, Mini, Saab, Volkswagen, and Volvo models (2.0T / 2.4T / 2.5T).

The DFC 340-74024 Front Premium Brake Hardware Kit is engineered to restore your vehicle's braking system to its original operating specifications. Over time, heat cycles and environmental exposure weaken factory clips and springs, leading to uneven pad wear, excessive noise, and reduced braking efficiency. This kit replaces worn OE components with high-tolerance hardware designed for a precise fit and long-term reliability.

Constructed to withstand the harsh conditions of the wheel well, this hardware kit features specialized coatings that provide a low coefficient of friction for smooth pad movement. The components are built to resist chemical degradation and extreme thermal stress, ensuring consistent performance during heavy braking.

• Manufacturer Part Number: 340-74024
• Corrosion Resistance: Treated to prevent rust and seize-up in harsh climates.
• High Heat Resistance: Maintains spring tension and structural integrity under high temperatures.
• Chemical Resistance: Resilient against road salt, brake fluid, and cleaning degreasers.
• Easy Installation: Designed to bolt directly to factory mounting points for a seamless removal and replacement process.

Fits select 2015-2026 Acura, Honda, Jaguar, Land Rover, and Volvo models.

The DFC 340-73022 Front Premium Brake Hardware Kit is engineered to restore factory-level braking performance by replacing fatigued or corroded hardware. Over time, brake hardware loses its tension and accumulates debris, leading to uneven pad wear, dragging, and excessive noise. This kit ensures smooth pad movement and consistent pressure across the rotor surface.

• Corrosion & Chemical Resistance: Advanced coatings protect against road salts and chemicals for a longer service life.
• Low Coefficient of Friction: Facilitates easy assembly and smooth pad sliding within the caliper bracket.
• High Heat Resistance: Maintains structural integrity and tension under the high thermal loads of modern braking systems.
• OE-Spec Fitment: Designed for precise installation on factory front calipers across a wide range of premium applications.
• Manufacturer Part Number: 340-73022

Fits select 2016-2026 Jaguar (F-Pace, I-Pace, XE, XF), Land Rover (Range Rover Velar), Polestar (Polestar 2), and Volvo (C40, S60, S90, V60, V90, XC40, XC60, XC90) vehicles.

The DFC Premium Front Hardware Kit is engineered to restore the proper function of your vehicle's braking system. Over time, heat and corrosion fatigue factory brake clips and springs, leading to uneven pad wear, dragging, and excessive noise. This kit replaces worn OE components to ensure smooth brake pad movement and consistent pressure distribution across the rotor face.

• Low Coefficient of Friction: Minimizes drag and ensures consistent pad retraction for reduced heat build-up.
• Corrosion Resistance: Engineered to withstand harsh road conditions and winter salts, preventing seized pads.
• High Heat Resistance: Maintains structural integrity and spring tension during aggressive braking or heavy-duty use.
• Chemical Resistance: Resilient against brake fluid, cleaners, and road contaminants.
• Precision Fit: Designed for easy assembly and removal, matching factory tolerances for a hassle-free installation.
• Manufacturer Part Number: 340-73021