Fits select 2004-2018 Scion xA, xB and Toyota Corolla, Prius, and Yaris models.

Restore the responsiveness and efficiency of your rear drum brakes with the DFC 370-91000 Drum Brake Hardware Kit. Over thousands of miles, the springs and clips in your drum assembly lose tension due to constant heat cycles and road grime, leading to dragging shoes, uneven wear, and excessive noise. This kit replaces those fatigued components with hardware manufactured from premium materials to ensure long-term reliability and consistent braking performance.

• Prevents premature brake shoe wear by maintaining proper tension and alignment
• Minimizes shoe drag to reduce heat buildup and improve overall fuel efficiency
• Helps eliminate annoying brake noise and vibration during operation
• Sold as a complete axle kit, providing hardware for both rear wheels
• Engineered for precise fitment to replace worn-out original equipment (OE) hardware
• Manufacturer Part Number: 370-91000

Fits 2005-2023 Toyota Tacoma (Base, Pre Runner, X-Runner, SR, SR5, Limited, TRD Off-Road, TRD Pro, TRD Sport, and Trail).

The DFC Drum Brake Hardware Kit (MPN: 370-76020) is an essential component for any rear brake service, providing the necessary hardware to restore factory braking performance. Over time, heat cycles and corrosion cause drum brake springs to lose their tension, leading to uneven shoe wear, excessive drag, and increased noise. This kit replaces worn-out components to ensure your brake shoes retract properly and stay aligned within the drum.

• Complete Axle Set: Includes hardware for both the driver and passenger side rear wheels.
• Restore Performance: Replaces fatigued springs and corroded pins to maintain consistent shoe tension and alignment.
• Premium Construction: Manufactured using high-quality materials designed for longevity and resistance to heat and moisture.
• Noise Reduction: Properly tensioned hardware minimizes vibration and chatter during braking events.
• Optimized Efficiency: Ensuring proper shoe retraction helps minimize drag, preventing premature wear and protecting fuel economy.

Fits 2003-2008 Toyota Corolla CE, LE, and S models.

The DFC 370-76016 Rear Drum Brake Hardware Kit provides all the necessary components to restore your vehicle's drum brake system to factory-level performance. Over time, heat cycles and environmental exposure weaken return springs and corrode pins, leading to uneven shoe wear, increased drag, and excessive noise. This kit replaces worn OE components to ensure proper shoe alignment and tension.

Engineered for longevity and consistent performance, these hardware kits are designed to withstand the harsh conditions of the braking system. Replacing hardware during every shoe change is a critical step in preventing premature wear and maintaining fuel efficiency by minimizing brake drag.

• Complete Axle Kit: Includes hardware for both the driver and passenger side rear wheels.
• Premium Materials: Manufactured to meet high standards for heat resistance and durability.
• Reduces NVH: Specifically designed to minimize noise, vibration, and harshness during braking.
• Restores Efficiency: Proper spring tension prevents shoes from dragging, improving fuel economy and reducing heat buildup.
• Manufacturer Part Number: 370-76016

Fits select 1984-2006 Toyota 4Runner, Land Cruiser, Pickup, Tacoma, and Tundra.

Restore the reliability and safety of your rear drum brakes with the DFC 370-76003 hardware kit. Over time, heat cycles and road salt fatigue the return springs, hold-down pins, and adjusters in your braking system. This fatigue leads to dragging shoes, uneven lining wear, and excessive noise. This premium kit replaces worn factory components to ensure consistent shoe retraction and proper alignment across the entire axle.

• Complete Axle Set: Includes all necessary hardware to service both the left and right rear drum brake assemblies.
• Optimized Efficiency: Minimizes shoe drag to improve fuel economy and prevent premature heat-related wear on the drums and shoes.
• Quiet Operation: Engineered to eliminate chatter, squeal, and vibration by maintaining proper tension on the brake components.
• Premium Materials: Manufactured with high-grade steel and heat-resistant coatings for longevity in harsh environments.
• Manufacturer Part Number: 370-76003

Fits select 1958-1980 Volkswagen Beetle, Karmann Ghia, Super Beetle, and Thing models.

Maintaining the drum brake system on classic air-cooled Volkswagens requires more than just new shoes. This DFC Rear Drum Brake Hardware Kit (MPN 370-74002) provides the essential springs, pins, and clips needed to ensure proper shoe return and alignment. Replacing worn hardware is critical for preventing premature shoe wear, minimizing drag, and reducing harmonic noise and vibration during stopping.

• Complete Axle Kit: Contains enough hardware to service both the left and right rear drum assemblies.
• Premium Construction: Manufactured using durable materials designed to withstand heat and tension for consistent performance.
• Optimized Efficiency: Properly tensioned springs ensure the shoes retract fully, improving fuel efficiency by eliminating unnecessary drag.
• Direct Fit: Designed to meet or exceed the performance of original equipment hardware for a reliable installation.
• Manufacturer Part Number: 370-74002

Fits 1989-1996 Nissan 300ZX and 1990-1996 Infiniti Q45.

The DFC Parking Brake Drum Brake Hardware Kit (370-67028) provides a complete solution for restoring the performance and reliability of your vehicle's emergency brake system. Over time, heat and corrosion fatigue the springs and clips, leading to poor shoe engagement or excessive dragging. This kit replaces those worn components to ensure consistent tension and proper alignment within the drum assembly.

• Manufactured using premium materials for longevity and consistent performance under high-stress conditions
• Prevents premature shoe wear by ensuring proper return and alignment
• Minimizes brake drag to help maintain fuel efficiency and prevent overheating
• Reduces operating noise and vibration for quieter braking
• Sold as a complete axle kit to service both the left and right sides
• Manufacturer Part Number: 370-67028

Fits select 2000-2025 Infiniti, Nissan, and Suzuki vehicles, including 350Z, 370Z, Frontier, G35, G37, GT-R, Maxima, Murano, Pathfinder, and Q50.

Restore the reliability and safety of your vehicle's parking brake system with the DFC 370-67025 Parking Brake Drum Brake Hardware Kit. Over time, the internal springs, clips, and pins within your rear drum-in-hat parking brake system can succumb to heat, corrosion, and fatigue. This kit provides a comprehensive solution by replacing worn components with premium-grade materials designed for long-term durability and consistent clamping force.

By ensuring proper shoe return and positioning, this hardware kit minimizes parasitic drag to maintain fuel efficiency and prevents the premature wear of your parking brake shoes. It is engineered to reduce annoying noise and vibration during operation, providing a quiet and smooth experience. This set is sold as a complete axle kit, containing the necessary hardware to service both the driver and passenger sides of the vehicle.

• Manufacturer Part Number: 370-67025
• Kit Type: Axle Kit (Complete rear set)
• Material: Premium-grade steel and composite components
• Function: Prevents shoe drag, reduces noise, and restores holding power
• Installation: Fits factory mounting positions for OE-level performance

Fits select 2007-2024 Chrysler Sebring, Dodge Avenger and Caliber, Jeep Compass and Patriot, Mitsubishi Lancer, Mirage, and i-MiEV, and Nissan Sentra, Versa, and Cube.

Restore your vehicle's braking efficiency and safety with the DFC Rear Drum Brake Hardware Kit (MPN: 370-67023). Over time, heat cycles and corrosion weaken the springs and clips inside your drum brakes, leading to uneven shoe wear, excessive noise, and increased pedal travel. This kit replaces those fatigued components with premium materials designed for long-term durability and consistent tension.

• Complete Axle Kit: Includes hardware for both rear wheels (driver and passenger sides).
• Reduces Noise & Vibration: Precision-engineered springs prevent shoe rattle and chatter for quieter operation.
• Optimizes Efficiency: Ensures proper shoe retraction to minimize drag, preventing overheating and protecting fuel economy.
• Extends Brake Life: Maintains correct shoe alignment to prevent premature or uneven friction wear.
• Premium Construction: Manufactured using high-grade materials to withstand harsh road conditions and thermal stress.
• MPN: 370-67023

Fits select 2013-2021 Chevrolet City Express and Nissan NV200 (LS, LT, S, SV, Taxi).

The DFC Rear Drum Brake Hardware Kit (370-67022) is engineered to restore factory-level braking performance. Drum brake components like return springs and hold-down pins are subject to extreme heat and corrosion, which weakens their tension over time. This leads to brake drag, unwanted noise, and uneven shoe wear. Replacing these parts with DFC premium hardware ensures consistent performance and helps maintain optimal fuel efficiency by minimizing mechanical drag.

• Complete Axle Kit: Provides all necessary hardware to service both the driver and passenger sides of the rear axle.
• Premium Construction: Manufactured using high-grade materials to resist fatigue and maintain tension under high heat cycles.
• Noise and Vibration Dampening: Designed to minimize chatter and ensure smooth brake operation.
• Prevents Premature Wear: Maintains proper shoe alignment and retraction to extend the service life of your brake shoes and drums.
• Part Number: 370-67022

Restore the responsiveness and efficiency of your braking system with the DFC Rear Drum Brake Hardware Kit (Part #370-58000). Over time, drum brake components like return springs and hold-down pins lose their tension due to heat and fatigue, leading to uneven shoe wear and excessive drag. This premium hardware kit is engineered to replace those worn OE components, ensuring your brake shoes retract properly and stay aligned within the drum.

Fits select 1988-2020 Honda Civic, Fit, and Insight models.

• Complete Axle Kit: Includes necessary components to service both the driver and passenger side rear drum brakes.
• Reduced Drag & Noise: Precisely tensioned springs minimize shoe-to-drum contact when the brakes are released, improving fuel efficiency and reducing unwanted vibration.
• Extended Brake Life: Prevents premature shoe wear by maintaining correct geometry and alignment throughout the braking cycle.
• Premium Construction: Manufactured from high-quality materials to resist corrosion and withstand the extreme heat of daily driving.
• Manufacturer Part Number: 370-58000

Fits select 1960-1997 Ford, Lincoln, and Mercury vehicles, including F-150, Bronco, E-150 Econoline, and Town Car.

The DFC 370-57014 Drum Brake Hardware Kit is designed to restore original equipment performance by replacing fatigued or corroded components within the drum assembly. Over time, brake springs lose their tension due to heat cycles, and pins can corrode, causing uneven shoe wear or dragging. This comprehensive kit provides the necessary hardware to ensure proper shoe retraction and alignment, improving fuel efficiency and extending the life of your brake shoes.

• Manufactured using premium materials for longevity and consistent performance
• Sold as a complete axle kit to service both wheels on one axle
• Restores proper spring tension to reduce brake noise and vibration
• Minimizes drag to prevent premature wear and improve fuel efficiency
• Precision-engineered to meet or exceed OE fit and function
• Manufacturer Part Number: 370-57014

Fits 2010-2013 Ford Transit Connect and 2013-2025 Nissan Sentra.

Maintaining your vehicle's drum brakes requires more than just new shoes. The DFC 370-54040 Rear Drum Brake Hardware Kit is designed to restore factory-level braking performance by replacing worn, heat-fatigued, or corroded springs, pins, and clips. These components are essential for ensuring the brake shoes remain properly aligned and retract fully when the pedal is released.

Constructed from premium materials, this kit resists the extreme heat and environmental stress common to rear braking systems. By replacing old hardware during every shoe service, you prevent premature shoe wear, reduce brake drag for improved fuel efficiency, and eliminate unwanted noise and vibration. This complete axle kit provides the hardware for both rear wheels to ensure consistent braking force across the axle.

• Complete axle kit including all necessary springs, pins, and hold-down hardware
• Manufactured with high-grade materials for maximum longevity and heat resistance
• Reduces noise, vibration, and harshness (NVH) for quieter operation
• Minimizes brake drag to optimize fuel efficiency and extend shoe life
• Direct-fit replacement for manufacturer part number 370-54040

Fits select 1991-2005 Buick, Cadillac, Chevrolet, Oldsmobile, and Pontiac vehicles including LeSabre, Century, Cavalier, Malibu, and Grand Am.

Over time, drum brake hardware loses its tension due to extreme heat cycles and environmental corrosion. This DFC Rear Drum Brake Hardware Kit (370-52003) is designed to restore your braking system to factory performance by replacing fatigued springs, pins, and retainers. High-quality materials ensure long-term durability and consistent shoe tension, preventing the common issues of dragging shoes or uneven pad wear.

Replacing your hardware during every shoe service is a critical step for professional-grade results. This kit helps minimize noise and vibration while ensuring proper shoe-to-drum clearance, which can improve fuel efficiency by reducing parasitic drag. Each kit is sold as a complete axle set to service both the driver and passenger sides of the vehicle.

• Replaces worn or corroded OE drum hardware
• Engineered with premium materials for extended service life
• Reduces brake noise and vibration
• Minimizes drag to prevent premature wear and improve efficiency
• Complete axle kit services both rear wheels
• Manufacturer Part Number: 370-52003

Fits select 1988-2007 Chevrolet Blazer, C1500, K1500, and Tahoe; GMC C1500, K1500, and Yukon; and Pontiac G5 models.

The DFC 370-52002 Rear Drum Brake Hardware Kit is engineered to restore the proper function and tension of your vehicle's drum braking system. Over time, heat and corrosion weaken return springs and hold-down pins, leading to uneven shoe wear, excessive noise, and increased drag. This kit replaces these critical components with high-quality materials to ensure consistent pedal feel and reliable stopping power.

• Manufactured with premium materials for maximum longevity and consistent thermal performance.
• Sold as a complete axle kit to service both rear wheels simultaneously.
• Helps prevent premature shoe wear, extending the service life of your braking system.
• Reduces noise, vibration, and harshness (NVH) by maintaining correct component alignment.
• Minimizes brake drag to improve fuel efficiency and prevent heat build-up.
• Manufacturer Part Number: 370-52002

Fits select 1974-2002 Chevrolet and GMC C/K/P/R/V series trucks, Suburban SUVs, and Express/G-Series vans.

The DFC 74-06 Rear Drum Brake Hardware Kit is engineered to restore factory-level performance to your vehicle's drum brake system. Over thousands of miles, the heat and stress of braking cycles weaken the return springs and hold-down clips, which can lead to uneven shoe wear, excessive noise, and increased drag. This comprehensive kit replaces those fatigued components to ensure consistent shoe return and proper tension within the drum.

• Complete Axle Service: Sold as a full axle kit to service both the driver and passenger sides.
• Restores Efficiency: Minimizes brake drag to help maintain optimal fuel efficiency and prevent overheating.
• Quiet Operation: Specifically designed to reduce noise and vibration during engagement.
• Premium Construction: Manufactured using high-grade materials for longevity and resistance to heat and corrosion.
• MPN: 370-48004

Fits select 1999-2025 Chevrolet Silverado/Express/Suburban/Avalanche, GMC Sierra/Savana/Yukon, Ford E-Series, Dodge Ram 2500/3500, and Hummer H2.

The DFC 370-48001 Parking Brake Drum Hardware Kit is engineered to restore the holding power and reliability of your vehicle's parking brake system. Over time, heat cycles and environmental exposure cause return springs and pins to lose tension, leading to brake drag, noise, and uneven wear. This comprehensive kit replaces worn components with premium materials to ensure consistent performance and extended service life.

• Complete Axle Kit: Contains all necessary hardware for both sides of the rear axle.
• Restores Tension: Prevents premature shoe wear by ensuring the parking brake shoes retract fully after use.
• Optimizes Efficiency: Minimizes parasitic drag to help maintain fuel efficiency and prevent overheating.
• Noise Reduction: Precision-engineered components help eliminate vibration and chatter during parking brake engagement.
• Manufacturer Part Number: 370-48001

Fits 2016-2023 Chevrolet LCF 3500 Base models.

Ensure your vehicle's parking brake system operates reliably with the DFC Parking Drum Brake Hardware Kit (MPN: 370-47051). Over time, extreme heat cycles and environmental exposure cause parking brake springs and clips to lose tension or corrode, leading to shoe drag, noise, and uneven wear. This kit replaces worn factory hardware with premium components engineered for longevity and consistent performance.

• Complete Axle Kit: Sold as a full set to service the entire rear axle.
• Enhanced Efficiency: Minimizes shoe drag to help improve fuel efficiency and prevent premature brake component failure.
• Noise and Vibration Control: Precision-fit components help eliminate chatter and vibration during engagement.
• Premium Construction: Manufactured using high-quality materials designed to withstand the stress of heavy-duty applications.
• Exact Fit: Engineered to match original equipment specifications for the 2016-2023 Chevrolet LCF 3500.

Fits select 1976-1999 Cadillac, Chevrolet, and GMC models including C10/C20, C1500/C2500, K-Series, and Suburban.

The DFC 370-47035 Rear Drum Brake Hardware Kit is engineered to restore factory-level performance to your vehicle's drum brake system. Over time, heat and moisture cause OE brake springs to lose tension, leading to uneven shoe wear, excessive noise, and increased drag. This kit replaces worn components with premium-grade materials to ensure consistent braking force and long-term reliability.

• Complete Axle Kit: Includes all necessary hardware for both driver and passenger sides to ensure balanced braking.
• Optimized Performance: Maintains proper shoe-to-drum clearance to minimize drag and improve fuel efficiency.
• Noise Reduction: Features high-tension springs and precision-fit clips to eliminate vibration and brake chatter.
• Premium Construction: Manufactured using corrosion-resistant materials for maximum longevity and consistent performance under load.
• Part Number: 370-47035