Fits 2011-2012 Ram 5500.

The Power Stop PBK097 Pin Boot and Bushing Kit is engineered to restore the smooth operation of your vehicle's braking system. Over time, thermal cycling and environmental exposure cause factory rubber boots to crack, swell, or tear, allowing moisture and road debris to contaminate the caliper slide pin bores. This kit provides high-quality rubber replacements to reseal the assembly, preventing the slide pins from seizing and ensuring even brake pad wear.

• Direct OE-style replacement components for a precise fit
• High-quality rubber construction designed to withstand extreme braking temperatures
• Prevents caliper binding and reduces the risk of premature brake pad failure
• Essential for maintaining consistent caliper sliding action during service
• Manufacturer Part Number: PBK097

Fits 2010-2012 Ford F-450 Super Duty.

Maintain the performance and reliability of your braking system with the Power Stop PBK070 Pin Boot and Bushing Kit. These components are critical for protecting the caliper guide pins from road debris, moisture, and extreme heat, ensuring smooth caliper sliding and preventing uneven pad wear or seized brakes. Designed as a direct replacement for worn-out factory hardware, this kit helps restore original equipment performance during your next brake service.

• Replaces worn or torn OE guide pin boots and bushings
• Protects caliper slide pins from corrosion and debris
• Constructed from high-quality materials for heat and chemical resistance
• Helps prevent caliper binding and premature brake component failure
• Manufacturer Part Number: PBK070

Fits 2010-2011 Ford F-350 Super Duty trucks.

The Power Stop PBK067 Caliper Pin Boot and Bushing Kit is engineered to restore the sliding integrity of your vehicle's braking system. Over time, heat and environmental exposure cause factory rubber boots to crack, tear, or swell, allowing moisture and road grime to enter the guide pin bore. This contamination often leads to seized calipers and uneven brake pad wear. Replacing these components ensures your calipers move freely for consistent, reliable braking performance.

• Direct replacement for original equipment (OE) caliper pin boots and bushings
• Manufactured from high-quality rubber compounds to resist extreme brake temperatures and road chemicals
• Helps prevent caliper guide pin seizure and premature brake pad drag
• Crucial for routine brake maintenance and caliper overhauls to ensure even clamping pressure
• Manufacturer Part Number: PBK067

Fits 2017-2018 Ford E-450 Super Duty.

The Power Stop PBK014 Brake Caliper Pin Boot and Bushing Kit is designed to restore the movement and protection of your vehicle's braking system hardware. Over time, heat and environmental exposure cause original rubber boots to crack and bushings to swell, leading to seized caliper pins and accelerated brake pad wear. This kit replaces those worn components to ensure your calipers slide freely for consistent, even braking performance.

• Direct replacement for OE caliper pin boots and bushings
• Constructed from high-temperature resistant rubber for durability
• Helps prevent caliper seizing and uneven brake pad wear
• Includes components necessary for one axle service
• Manufacturer Part Number: PBK014

Fits 1976-1986 Jeep CJ5, CJ7, and Scrambler.

The Omix Emergency Brake Equalizer is a direct-fit replacement designed to restore the proper functionality of your Jeep's parking brake system. This critical component serves as the mechanical link that connects the front or intermediate brake cable to the rear brake cables, ensuring even tension is applied to the rear drums for reliable holding power. Manufactured from durable metal to meet or exceed original equipment standards, it provides a secure connection that stands up to the rigors of off-road and daily use.

• Direct-fit OE style replacement ensures proper installation
• Constructed from heavy-duty metal for long-term durability
• Connects front/intermediate brake cables to the rear cables
• Manufacturer Part Number: 16756.01
• Replaces OE Part Number: 3222572
• Limited 5-Year Warranty

Fits 1972-1978 Jeep CJ5, CJ6, and CJ7 models equipped with 11-inch drum brakes.

Restore the reliability and safety of your Jeep's parking brake system with this Omix right-hand (RH) rear emergency brake lever. Over years of service, original brake components can seize or succumb to corrosion, preventing the parking brake from fully engaging. This OE-style replacement is engineered to match factory geometry, providing a direct-fit solution for 11-inch drum brake assemblies.

• Position: Rear Right Hand (RH) Passenger Side
• Replacement for factory 11-inch drum brake systems
• Replaces OE Part Number: 937964
• Manufacturer Part Number: 16751.04
• Direct-fit design for seamless installation into factory mounting points
• Limited 5-Year Warranty

Sold individually. For the matching left-hand (LH) driver side lever, use Omix part number 16751.03.

Fits 1972-1978 Jeep CJ5, CJ6, and CJ7 models equipped with 11-inch rear drum brakes. This Omix replacement emergency brake lever is engineered to meet or exceed original equipment standards, providing a reliable repair for your Jeep's parking brake system.

Designed as a direct-fit component for the driver-side (LH) rear drum assembly, this lever ensures the proper mechanical leverage needed to engage the brake shoes against the drum. It is an essential component for restoration projects where the original hardware has suffered from corrosion, binding, or mechanical fatigue. For a complete rear axle service, use this in conjunction with the right-hand counterpart (16751.04).

• Replaces OE Part Number: 937965
• Position: Left Hand (LH) Rear
• Brake Type: 11-inch Drum Brakes
• Installation: Direct Fit OE Style
• Manufacturer Part Number: 16751.03
• Warranty: Limited 5-Year Manufacturer Warranty

Fits select 1978-2006 Jeep CJ5, CJ7, CJ8 Scrambler, Cherokee XJ, Wrangler YJ/TJ, and Grand Cherokee ZJ models equipped with 10-inch rear drum brakes.

This Omix wheel cylinder link is an OE-style replacement designed to restore the mechanical connection between the wheel cylinder and the brake shoes. Built to meet or exceed original equipment standards, this link ensures proper shoe expansion and reliable braking performance. As a direct-fit component, it eliminates the guesswork during installation on classic and modern Jeep drum brake assemblies.

• Direct fit for 10-inch rear drum brake systems
• Constructed to OE specifications for reliable service life
• Replaces OE part number: 0048331
• Manufacturer Part Number: 16751.02
• Limited 5-year manufacturer warranty

Fits select 1978-2006 Jeep CJ5, CJ7, Scrambler, Cherokee XJ, Wrangler YJ/TJ, and Grand Cherokee ZJ models equipped with 10-inch rear drum brakes.

The Omix Brake Shoe Retaining Plate is a direct-fit replacement for worn or damaged factory hardware. Designed to meet or exceed OE standards, this retaining plate ensures the brake shoes remain properly aligned and secured within the drum assembly for reliable stopping performance. This OE-style component is constructed for durability and a precise fit, making it an essential part of a complete drum brake service or overhaul.

• Direct replacement for factory part number 3201032
• Fits either the left or right side of the vehicle
• Designed specifically for 10-inch drum brake systems
• Required quantity: 2 per drum (sold individually)
• Manufacturer Part Number: 16751.01
• Limited 5-Year Warranty

Fits select 1982-1999 Jeep CJ5, CJ7, Scrambler, Wrangler, Cherokee, Comanche, Grand Cherokee, Wagoneer, and J-Series trucks.

Ensure a leak-free seal and reliable hydraulic performance with this Omix brake hose to caliper bolt. This direct-fit replacement component is engineered to secure the front brake hose to the caliper on Jeep vehicles equipped with front disc brakes. Designed to meet OE specifications, this bolt provides a dependable solution for replacing corroded, cross-threaded, or damaged factory hardware during brake system maintenance or caliper replacement.

• Direct replacement for OE part number 4006700
• Designed specifically for front disc brake applications
• Precision-machined for a secure, OE-style fit
• Sold individually (requires one bolt per caliper)
• Manufacturer Part Number: 16736.03
• Limited 5-year warranty

Fits select 1941-2011 Jeep and Willys models, including Wrangler, Cherokee, Grand Cherokee, and CJ series.

This Omix brake hose retainer clip is engineered to restore the secure mounting of your hydraulic brake lines to the frame or axle brackets. Over time, factory clips can corrode, lose tension, or go missing during service, leading to loose lines that are susceptible to vibration and chaffing. This direct-fit replacement ensures your brake system remains safely routed and compliant with factory specifications.

• Replaces OE part number: 637427
• Manufactured from durable metal for long-lasting tension and reliability
• Direct-fit OE style design for seamless installation into factory mounting points
• Sold individually; multiple may be required per vehicle
• Manufacturer Part Number: 16736.01
• Backed by a limited 5-year warranty

Fits 2018-2024 Subaru WRX STI models. These GiroDisc titanium pad shields are engineered for high-performance and track-driven vehicles where managing brake system temperatures is critical to maintaining consistent stopping power.

By acting as a thermal barrier between the brake pad backing plate and the caliper pistons, these shields significantly reduce the rate of heat transfer into the brake fluid. This insulation helps prevent fluid boiling and brake fade during heavy track sessions, while also extending the life of your caliper seals. Titanium is utilized for its remarkably low thermal conductivity, making it an ideal material for this high-stress application.

• Manufactured from high-grade titanium for maximum thermal resistance
• Reduces heat soak into the caliper pistons and brake fluid
• Essential for endurance racing, track days, and aggressive driving
• Helps maintain a firm, consistent brake pedal feel
• Note: Requires the use of trimmed rear pads for proper installation
• Manufacturer Part Number: TS-6027-4

Fits the 2008 Mercedes-Benz CLK63 AMG Black Series (C209).

GiroDisc Front Titanium Pad Shields (MPN: TS-1382-4) provide a critical thermal barrier between your brake pads and caliper pistons. During high-performance driving or track sessions, brake pads can reach temperatures that transfer directly into the caliper. This excessive heat often results in boiled brake fluid, a spongey pedal, and premature degradation of caliper seals and dust boots.

By utilizing the low thermal conductivity of titanium, these precision-cut shields insulate the rest of your braking system from extreme pad temperatures, ensuring consistent pedal feel and protecting expensive caliper components from heat-related damage.

• Precision-cut from high-grade titanium for exact fitment
• Significantly reduces heat transfer to caliper pistons and fluid
• Helps prevent brake fluid boil and spongey pedal feel
• Protects caliper seals and dust boots from thermal degradation
• Manufacturer Part Number: TS-1382-4

Fits 2016-2024 Alfa Romeo Giulia Quadrifoglio models equipped with standard iron rotors (Excludes Carbon Ceramic Matrix / CCM brakes).

Aggressive driving and track sessions on the Giulia Quadrifoglio platform generate significant thermal energy. Without a barrier, this heat transfers from the brake pads directly into the caliper pistons and brake fluid, leading to fluid fade and potentially damaging caliper seals. GiroDisc titanium pad shields act as a high-performance thermal insulator to keep your braking system within its optimal operating temperature range.

Unlike stainless steel or aluminum, titanium has extremely low thermal conductivity. These precision-cut shields prevent heat soak into the hydraulic system, providing a more consistent pedal feel during spirited driving. They are designed for a drop-in installation behind the front brake pads.

• Material: High-grade titanium for superior thermal resistance
• Position: Front
• Application: Specifically for Giulia QV iron brake systems (Non-CCM)
• Inclusion: Complete set for both front calipers
• Manufacturer Part Number: TS-1365-4

Fits the 2020 Subaru WRX equipped with the Performance Package and factory Brembo calipers.

Designed for track-day enthusiasts and spiritied drivers, these GiroDisc Front Titanium Pad Shields (TS-1001-4) provide a critical thermal barrier between your brake pads and caliper pistons. By utilizing the low thermal conductivity of titanium, these shields significantly reduce the transfer of friction-generated heat into your brake fluid, helping to prevent fluid boil and maintain a firm, consistent pedal feel during high-performance use.

• Material: High-grade titanium for superior thermal insulation
• Function: Minimizes heat soak into the caliper and brake fluid
• Direct Fit: Laser-cut specifically for the 2020 WRX Performance Package Brembo calipers
• Installation: Slides directly behind the brake pad backing plate
• Part Number: TS-1001-4

Fits the 2020 Subaru WRX with the Performance Package (Brembo Calipers).

Protect your braking system from extreme thermal loads with GiroDisc Rear Titanium Pad Shields. These precision-cut shims are designed to act as a critical heat barrier between the brake pads and your caliper pistons. By utilizing the low thermal conductivity of titanium, these shields significantly reduce the amount of heat transferred into the caliper seals and brake fluid.

This thermal insulation is essential for track-driven vehicles, as it helps prevent brake fluid boil and pedal fade while extending the service life of your caliper internal components. These shields install easily between the pad backing plate and the caliper pistons without requiring permanent modifications.

• Material: High-grade titanium for superior thermal resistance
• Placement: Rear brake calipers
• Application: Reduces heat soak into brake fluid and piston seals
• Manufacturer Part Number: TS-0961-4

GiroDisc Titanium Brake Pad Shields provide a critical thermal barrier between your brake pads and the caliper pistons. Specifically engineered for StopTech ST40 calipers, these shields utilize the low thermal conductivity of titanium to significantly reduce heat transfer to the brake fluid. This helps prevent fluid boiling and brake pedal fade during high-performance driving or intensive track sessions.

• Acts as a thermal insulator to protect caliper pistons and seals
• Reduces heat soak into the brake fluid to maintain consistent pedal feel
• Precision-cut specifically for the StopTech ST40 caliper profile
• Constructed from high-grade titanium for durability and heat resistance
• Manufacturer Part Number: TS-0609-4

This genuine Ford Racing FP350S ABS Module with Bracket (M-2353-D) is a specialized service component engineered specifically for the FP350S factory road race car. Designed to handle the high-intensity braking demands of competitive track use, this module provides the specific calibration required for optimized deceleration and wheel-speed management in a racing environment.

This assembly includes the necessary mounting bracket to ensure a secure, vibration-resistant installation within the vehicle's chassis. As an authentic service part, it restores the precise ABS functionality and feedback characteristics required by the FP350S platform.

• Manufacturer Part Number: M-2353-D
• Model Application: Designed exclusively for Ford FP350S track vehicles
• Inclusions: ABS control module and integrated mounting bracket
• Classification: For off-road and competition use only; not intended for street use
• Service Use: Direct replacement for original FP350S equipment

The Ford Racing BOSS 302R/S ABS Module is a precision-calibrated electronic control unit designed specifically for the rigors of competitive track use. Engineered for the factory-built BOSS 302R and 302S race cars, this module features a unique software calibration optimized for high-performance braking systems and racing slick tires.

• Specifically tuned for racing and track-day environments
• Developed for Ford Mustang BOSS 302R and 302S factory competition models
• Optimized brake pressure modulation for increased grip levels
• Manufacturer Part Number: M-2353-CA

Notice: This component is intended for Off-Road Use Only. It is not designed for, nor should it be used in, street-driven vehicles on public roads.

Accurately monitor your braking system's thermal performance with EBC Racing Caliper Temperature Indicator Strips. These adhesive-backed thermal strips provide a critical data point for racers and performance enthusiasts by recording the peak operating temperature reached by the brake calipers during a track session or heavy-duty use.

By applying these strips directly to the caliper body, you can determine if your brake fluid is nearing its boiling point or if your current pad compound is operating within its intended heat range. This is a vital diagnostic tool for preventing fluid fade and protecting caliper seals from heat damage. The strips feature a permanent color change to ensure you have a reliable record of maximum temperatures even after the components have cooled.

• Provides a permanent record of peak caliper operating temperatures
• Essential for selecting the correct brake fluid and pad compounds
• Easy adhesive application to any clean, smooth caliper surface
• Helps identify cooling issues or uneven brake bias
• Includes: 8 individual temperature strips
• Manufacturer Part Number: TS001

Fits select 2008-2013 BMW 1 Series M, 128i, 135i, 135is, and M3 (4.0L).

EBC Racing titanium brake pad shims provide a high-performance thermal barrier between your brake pads and caliper pistons. Laser-cut from premium titanium sheet, these shims feature a perforated design specifically engineered to interrupt and reduce conductive heat transfer. This protection is critical for maintaining braking system integrity, as most caliper seals begin to sustain damage at temperatures exceeding 130°C (270°F).

By limiting the heat soak into the caliper body and brake fluid, these shims help prevent fluid boil and maintain a firm, consistent pedal feel under heavy track or spirited street use. Unlike disposable hardware, these titanium shims are designed to be reused across multiple pad changes unless physically damaged.

• Laser-cut titanium construction for maximum thermal resistance
• Perforated surface area reduces heat conduction to the caliper and fluid
• Helps prevent seal degradation by maintaining lower operating temperatures
• Durable and reusable through multiple brake pad service intervals
• Direct fit for front caliper applications
• Manufacturer Part Number: SH1449

Fits select 2003-2017 Buick, Chevrolet, Dodge, Ford, Honda, Mitsubishi, Pontiac, and Subaru models (2.5T).

EBC Racing titanium brake pad shims provide an essential thermal barrier between your brake pads and the caliper pistons. Laser-cut from high-grade titanium sheet, these shims are specifically perforated to minimize conductive heat transfer, protecting your braking system during high-performance or track use. By reducing the heat soak reaching the calipers, these shims help prevent damage to caliper seals, which typically begin to degrade at temperatures exceeding 130°C (270°F).

These SH1210 shims are designed for long-term durability and can be reused during multiple pad changes unless physically damaged. They apply directly to the back of your pad set, providing a simple yet effective way to maintain consistent pedal feel and extend the lifespan of your hydraulic components.

• Manufacturer Part Number: SH1210
• Material: Laser-cut perforated titanium
• Protects caliper seals from temperatures exceeding 130°C/270°F
• Reduces heat transfer to brake fluid
• Reusable across multiple pad sets
• Designed for front caliper applications

Fits 2017-2023 Porsche Macan Base and Macan T.

The EBC EFA196 Brake Wear Lead Sensor Kit is a precision replacement component designed to maintain the integrity of your vehicle's brake monitoring system. These sensors are engineered to trigger the dashboard warning light when brake pad friction material reaches its service limit, preventing rotor damage and ensuring consistent stopping safety. This kit is specifically designed for use with brake systems utilizing FMSI pad number D1663.

• Manufacturer Part Number: EFA196
• Fitment: Front brake system
• Compatibility: Engineered for FMSI Pad No. D1663
• System Context: Designed for use with 345mm vented front rotor applications
• Installation: Direct plug-and-play fitment into factory harness

Replacing your wear leads during every pad change is a standard service practice for Porsche Macan owners to ensure the electronic safety systems remain accurate and reliable.

Ensure your braking system maintains its safety and monitoring integrity with the EBC Brakes EFA186 Front Brake Wear Lead Sensor Kit. Designed to fit select 2016-2023 Mini Cooper, Clubman, and Countryman models (1.5L), this sensor replaces the high-heat electrical lead that triggers the dashboard service light when your brake pads reach their minimum thickness.

As a precision-engineered replacement, the EFA186 is built to withstand the thermal stress of the front braking system. It is specifically compatible with FMSI pad number D1308 and intended for use with 280mm diameter vented rotors. During a brake service, replacing the wear sensor is recommended to ensure the system remains functional and calibrated for your next set of pads.

• Manufacturer Part Number: EFA186
• Position: Front
• Pad Compatibility: Fits FMSI Pad No. D1308
• Rotor Compatibility: 280mm Diameter, Vented, 5-Bolt Hole
• Rotor Dimensions: 45mm Height, 22mm Thickness
• Fitment: Direct OE-style replacement for factory mounting points

Fits select 2015-2026 BMW 530e, 530i, 540i, 640i, 740e/i, 750i, M5, M550i, M760i, Z4, and Toyota GR Supra.

The EBC Brake Wear Lead Sensor Kit (EFA180) is a critical component for maintaining your vehicle's integrated safety systems. These electronic sensors are designed to trigger the dashboard warning light when brake pad friction material reaches its minimum service thickness, preventing rotor damage and ensuring consistent stopping power. Built to meet or exceed OE specifications, this sensor provides a reliable electrical connection and high-temperature resistance to withstand the rigors of the wheel-well environment.

Whether you are performing a routine pad swap or a complete brake overhaul, replacing the wear sensors is standard practice to ensure the system reset functions correctly and provides accurate monitoring. This kit is specifically calibrated for high-performance brake systems using FMSI Pad No. D1867.

• Manufacturer Part Number: EFA180
• FMSI Compatibility: Designed for Pad No. D1867
• Brake System Specs: Compatible with systems using 348mm diameter, 36mm thick vented rotors (5-bolt configuration)
• Build Quality: Direct replacement for a factory-level fit and reliable electrical signal
• Installation: Connects to factory wiring harness points for a seamless install

Fits select 2015-2023 BMW 530e, 530i, 540i, 640i Gran Coupe, 740e, 740i, 750i, M5, M550i, and M760i.

The EBC Brakes EFA179 Rear Brake Pad Wear Sensor is a precision-engineered replacement lead designed to maintain your vehicle's integrated brake monitoring system. This single-use sensor is installed into the rear brake pads and is designed to trigger the dashboard warning indicator once the friction material wears down to a critical level. Replacing the sensor during every pad change ensures your vehicle can continue to protect rotors from metal-on-metal damage.

• Direct-fit replacement for the factory rear wear lead
• High-temperature resistant wiring and outer sheathing for reliable signal transmission
• Precision-molded electrical connector for a secure, weather-tight fitment
• Restores dashboard service warning functionality
• Manufacturer Part Number: EFA179

Fits select 2014-2023 Mercedes-Benz B250e, C300, C350e, C400, C450 AMG, CLA250, E300, GLA250, and GLC300 (2.0L).

This EBC Brake Wear Lead Sensor (EFA178) is a direct-fit replacement designed to restore your vehicle's brake pad monitoring system. Designed for precision compatibility with FMSI pad number D1694, this sensor triggers the dashboard warning light when pads reach their service limit, preventing costly rotor damage and ensuring safe braking performance. Built to withstand the high-heat environment of the wheel well, it features a durable wiring harness and secure electrical connectors that match OE specifications for a seamless installation.

• Manufacturer Part Number: EFA178
• Compatible FMSI Pad: D1694
• Rotor Compatibility: Vented, 295mm Diameter
• Rotor Thickness: 28mm
• Rotor Height: 51mm
• Bolt Holes: 5

Fits select 2012-2023 BMW 2, 3, and 4 Series, M2, M3, and M4 (2.0L).

The EBC Brakes EFA165 Rear Brake Pad Wear Sensor Lead is a precision-engineered direct replacement for your factory wear indicator. As your brake pads thin through normal use, this sensor eventually makes contact with the rotor, completing an electrical circuit that triggers the dashboard warning light. Replacing this lead during every brake service is essential to ensure you are alerted before the pads reach a metal-to-metal state, which can cause severe scoring and damage to your rotors.

• Manufacturer Part Number: EFA165
• Position: Rear
• Fitment Type: Direct OE replacement
• Construction: High-temperature resistant wiring and connectors
• Function: Prevents rotor damage by providing timely pad-life alerts

This part is designed to meet or exceed the performance of the original component, featuring a plug-and-play connector that matches the factory harness for a secure and reliable installation.

Fits select 2012-2023 BMW 2 Series, 3 Series, 4 Series, and M models (2.0L). This EBC brake wear lead sensor is a direct-fit replacement for your vehicle's factory front sensor. These sensors are designed to trigger a dashboard warning light when brake pads reach their minimum thickness, helping you prevent rotor damage and ensure consistent stopping performance.

Constructed with high-quality materials to withstand the extreme temperatures and vibrations found in the braking system, the EFA164 sensor features OE-style connectors for a simple, plug-and-play installation without the need for splicing. This component is essential for any brake service to ensure your vehicle's maintenance monitoring system is reset and operating correctly.

• Manufacturer Part Number: EFA164
• Application: Front Brake Wear Sensor
• FMSI Pad Compatibility: D1609
• Specifications: For use with 380mm diameter, 30mm thick rotors
• Plug-and-play OE-style connector
• Durable, high-temperature resistant lead

Fits select 2008-2019 Toyota Corolla, Prius C, Scion iQ, and Scion xD. This DFC Rear Drum Brake Hardware Kit (370-91001) is engineered to restore original equipment braking performance and ensure the reliable operation of your vehicle's drum brake system.

Over time, brake hardware loses tension due to extreme heat and constant fatigue, which can lead to uneven shoe wear, increased noise, and vibration. This kit is manufactured using premium materials to maintain consistent performance and longevity. Replacing your hardware during a shoe service helps minimize shoe drag to improve fuel efficiency and prevent premature wear on newly installed shoes.

• Complete Axle Solution: Sold as a kit for both rear wheels (not per side) for a comprehensive brake service.
• Premium Construction: High-quality springs and pins are designed to resist heat-cycling and corrosion.
• Noise Reduction: Properly tensioned hardware reduces vibration and brake chatter.
• Optimal Efficiency: Ensures proper shoe retraction to minimize drag and optimize fuel economy.
• Manufacturer Part Number: 370-91001

Vehicle Fitment