Fits select 1978-up General Motors vehicles equipped with front disc and rear drum brake systems.

The Wilwood 260-11322 GM Style Fixed Proportioning Valve is a precision-engineered replacement designed for OE-style mounting. This non-adjustable valve provides essential brake balance by regulating fluid pressure to prevent premature rear-wheel lockup. It includes an integrated anti-dive metering delay valve, which enables rear brake pressure to build momentarily before the front circuit engages, enhancing vehicle stability and improving braking transitions.

• Construction: Manufactured from lightweight aluminum with a durable black anodized finish for corrosion resistance.
• Pressure Regulation: Delivers a 63% pressure reduction to the rear circuit after reaching a 350 PSI knee point.
• Metering Delay: Features a 30 PSI rear-to-front delay circuit to optimize pad-to-rotor and shoe-to-drum engagement.
• Safety Monitoring: Includes a circuit failure sender that activates at 50 ± 10 PSI to notify the driver of hydraulic pressure loss.
• Specifications: Maximum recommended operating pressure of 2000 PSI.
• Installation: Designed to allow direct connection of original brake lines when mounted in the factory location.

Designed for precision and durability, Wilwood 250-10201 Primary Rear Brackets serve as intermediate mounting components to adapt caliper brackets to specific vehicle applications. These brackets provide the necessary interface to ensure proper caliper positioning and alignment for consistent braking performance.

Each bracket is engineered from a high-strength aluminum alloy, offering a balance of reduced unsprung weight and high structural rigidity. Depending on the application, these units are equipped with steel clinch nuts and other specialized hardware required for a secure and reliable installation onto the vehicle's rear assembly.

• Manufacturer Part Number: 250-10201
• Position: Rear
• Material: High-strength aluminum alloy
• Hardware: Includes steel clinch nuts or application-specific hardware as required
• Type: Primary intermediate adapter bracket

Fits select 2005-2012 Porsche 911, Boxster, and Cayman models.

Maintain the integrity of your vehicle's braking system with the Brembo A00417 Front Right Brake Pad Wear Sensor. This electronic component is engineered to monitor the remaining thickness of your brake pads, sending an immediate signal to the dashboard when they reach their minimum service life. Built to exact OE specifications, this sensor ensures your Porsche's safety systems function exactly as intended by the factory.

Brembo recommends replacing brake wear sensors during every pad change to ensure reliable electrical connectivity and to prevent sensor failure caused by heat cycling. This sensor features high-quality wiring and reinforced connectors designed to resist the extreme temperatures and harsh environmental conditions found within the wheel well.

• Direct-fit replacement for the front right brake position
• Electronic monitoring triggers warning light at minimal pad thickness
• High-quality wiring and connectors resist high heat and moisture
• Designed to meet or exceed original equipment standards
• Manufacturer Part Number: A00417

Fitment Applications:

The DFC 370-74015 Parking Brake Hardware Kit is engineered to restore the performance and reliability of your vehicle's parking brake system. Over time, constant heat cycles and environmental exposure cause original springs and clips to lose tension, leading to brake drag, premature shoe wear, and unwanted noise. This kit replaces worn-out components with premium materials designed for longevity and consistent engagement.

• Complete axle kit includes necessary hardware for both the driver and passenger sides
• Manufactured with high-quality materials to resist fatigue and maintain proper tension
• Minimizes brake drag to improve fuel efficiency and prevent rotor overheating
• Reduces noise and vibration for quieter operation
• Engineered to meet or exceed the performance of the factory original hardware
• Manufacturer Part Number: 370-74015

Fits 2014-2015 Mitsubishi Mirage (DE, ES, and RF). This DFC Rear Drum Brake Hardware Kit is engineered to restore proper braking performance by replacing fatigued or corroded return springs, hold-down pins, and clips that lose tension over thousands of heat cycles.

Using high-grade materials for maximum longevity, this kit ensures even brake shoe pressure and consistent retraction. Properly functioning hardware is critical for preventing shoe drag, which reduces fuel efficiency and leads to premature friction wear and excessive heat buildup. This comprehensive set provides everything needed to refresh the drum assembly on both rear wheels.

• Complete axle kit includes hardware for both driver and passenger sides
• Manufactured with premium materials to resist corrosion and heat fatigue
• Reduces brake noise, chatter, and vibration
• Minimizes drag to improve fuel efficiency and extend shoe life
• Manufacturer Part Number: 370-72012

This DFC Parking Brake Drum Hardware Kit provides all the necessary components to refresh your vehicle's parking brake system for a complete axle. Over time, heat cycles and environmental exposure cause OE parking brake springs and pins to lose tension or corrode, leading to shoe drag, excessive noise, or improper engagement. This kit replaces worn hardware to restore consistent performance and prevent premature wear on the parking brake shoes.

• Fits select 2004-2020 Mitsubishi Endeavor, Lancer, Outlander, and Subaru Forester, Impreza, and WRX models.
• Manufactured with premium materials to ensure long-term durability and proper tension.
• Reduces noise and vibration by maintaining correct shoe alignment and retraction.
• Optimizes fuel efficiency by minimizing brake drag.
• Complete axle kit includes hardware for both the driver and passenger sides.
• Manufacturer Part Number: 370-72005

Fits select 1999-2010 Saab 9-3, 9-5, and Saturn LS/LW/L-Series models (2.3T).

The DFC 370-65000 Parking Brake Drum Brake Hardware Kit is engineered to restore the functionality and safety of your vehicle's emergency brake system. Over time, heat cycles and environmental exposure weaken return springs and corrode pins, leading to parking brake drag, premature shoe wear, or poor engagement. This kit provides a comprehensive solution to refresh your braking components for consistent, reliable performance.

• Manufactured from premium materials for high-temperature resistance and longevity.
• Sold as a complete axle kit to service both the driver and passenger side rear wheels.
• Prevents premature wear by maintaining proper tension and alignment within the drum assembly.
• Minimizes mechanical drag to improve fuel efficiency and reduce unwanted noise/vibration.
• Precision-engineered for a direct fit to replace worn-out original equipment hardware.
• Manufacturer Part Number: 370-65000

Fits 1964-1979 Austin Healey Sprite and MG Midget.

The DFC 370-64000 Rear Drum Brake Hardware Kit is designed to restore the mechanical integrity of your vehicle's braking system. Over time, brake hardware is subjected to extreme heat cycles and environmental corrosion, leading to weakened return springs and fatigued hold-down clips. This kit replaces those worn components to ensure proper shoe retraction and alignment, preventing uneven wear and excessive heat buildup.

• Manufactured using premium materials for longevity and consistent tension
• Prevents premature shoe wear by ensuring proper component positioning
• Minimizes shoe drag to improve fuel efficiency and prevent drum overheating
• Reduces brake noise and vibration for quieter operation
• Sold as a complete axle kit to service both rear wheels
• Manufacturer Part Number: 370-64000

Fits select 1950-1974 International L110, R100, S100, A100, B100, and C1000 series trucks and vans. This DFC 50-87 Rear Drum Brake Hardware Kit provides the essential components needed to restore proper brake shoe tension and operation on your vintage International vehicle.

Over time, heat cycles and corrosion weaken drum brake springs and hardware, leading to uneven shoe wear, increased drag, and excessive noise. This kit replaces worn factory components with premium-grade materials designed for longevity and consistent pedal feel. Sold as a complete axle kit, it includes the necessary hardware for both the driver and passenger side rear wheels to ensure a balanced braking system.

• Manufactured using premium materials for maximum durability and heat resistance
• Prevents premature shoe wear by ensuring proper return spring tension
• Minimizes brake drag to improve overall fuel efficiency and reduce heat buildup
• Reduces chatter, noise, and vibration during braking
• Complete axle kit includes hardware for both rear wheels
• Manufacturer Part Number: 370-54061

Fits select 1958-1975 International 100, Travelall, A120, A122, B120, B122, M Series Van, and MS 1210.

The DFC 370-54059 Front Drum Brake Hardware Kit is engineered to restore the structural integrity and mechanical efficiency of your vehicle's drum braking system. Over years of operation, heat cycles and environmental exposure fatigue OE return springs and hold-down hardware, resulting in uneven shoe wear, excessive drag, and audible chatter. This kit replaces those worn components with premium materials designed for high-heat resilience and consistent tension.

• Complete Axle Solution: Sold as a full axle kit to service both front wheels simultaneously, ensuring balanced braking performance.
• Reduced Drag: Restores proper shoe retraction to improve fuel efficiency and prevent premature lining wear.
• Noise Suppression: Corrects vibration and rattle issues by ensuring all components are secured to factory-grade tolerances.
• Longevity: Manufactured using high-grade materials for consistent performance under heavy braking loads.
• Manufacturer Part Number: 370-54059

Fits 1969-1974 Ford F-500 Base.

The DFC 370-54043 Conventional Front Drum Brake Hardware Kit is designed to restore the structural integrity and performance of your vehicle's braking system. Over time, heat cycles and environmental exposure weaken drum hardware, leading to uneven shoe wear, increased drag, and excessive noise. This kit replaces worn-out springs, pins, and retainers to ensure proper shoe alignment and consistent return action.

This complete axle kit provides the necessary components for both front wheels, helping to minimize drag for improved fuel efficiency and extending the service life of your brake shoes. Each component is manufactured from premium materials to withstand high heat and maintain proper tension throughout the life of the brakes.

• Manufacturer Part Number: 370-54043
• Position: Front
• Service Scope: Complete axle kit (covers both driver and passenger sides)
• Prevents premature shoe wear and ensures consistent braking performance
• Reduces brake noise and vibration for quieter operation
• Reduces mechanical drag to help maintain fuel efficiency

Fits select 1960-1981 Dodge (B-Series, D-Series, W-Series, M300, P-Van), Ford (F-250, P-Series), and Plymouth (Voyager) models.

The DFC 370-54041 Drum Brake Hardware Kit is engineered to restore the mechanical integrity of your vehicle's drum braking system. Over years of heat cycles and environmental exposure, factory return springs lose their tension and hold-down pins can corrode, leading to uneven shoe wear, excessive drag, and annoying brake squeal. Replacing these components during every shoe service is critical for maintaining proper shoe-to-drum clearance and ensuring a consistent pedal feel.

This comprehensive axle kit includes all necessary springs, pins, and clips to service both sides of the vehicle. By using premium materials resistant to fatigue and corrosion, DFC hardware helps minimize drag—improving fuel efficiency—and prevents the premature wear often caused by dragging or sticking shoes.

• Restores proper spring tension for consistent shoe return
• Reduces brake noise, vibration, and harshness (NVH)
• Minimizes brake drag to improve fuel economy and extend shoe life
• Complete axle kit provides hardware for both driver and passenger sides
• Manufactured to precise tolerances for reliable, long-term performance
• Manufacturer Part Number: 370-54041

Fits select 1966-2004 Ford F-150, F-150 Heritage, F-250, F-350, E-250, E-300, and E-350 models. This DFC (Dynamic Friction Company) drum brake hardware kit is engineered to restore the performance of your vehicle's rear or front drum braking system by replacing worn, fatigued, or corroded components.

Over time, the return springs, hold-down pins, and clips in a drum system lose their tension due to heat cycles and environmental exposure. Weak springs can cause brake shoes to drag against the drum, leading to premature lining wear, increased heat, and reduced fuel efficiency. This kit provides all the necessary components for a complete axle service, ensuring the shoes retract properly and stay aligned during operation.

• Complete Axle Kit: Includes hardware for both the driver and passenger sides.
• Reduces Noise: Replaces loose or vibrating components to eliminate brake chatter and squeal.
• Prevents Drag: High-quality tension springs ensure positive shoe retraction, minimizing parasitic drag.
• Durable Construction: Manufactured using premium materials for consistent performance and resistance to heat and corrosion.
• Manufacturer Part Number: 370-54038

Fits select 1961-1975 Ford Bronco, F-100, and P-100 models.

This DFC (Dynamic Friction Company) drum brake hardware kit is engineered to restore the structural integrity and performance of your vehicle's drum brakes. Over time, heat cycles and environmental exposure cause return springs to lose tension and pins to corrode, which can lead to uneven shoe wear, excessive noise, and parasitic brake drag. Replacing hardware during every shoe change is a critical step for maintaining consistent pedal feel and maximizing fuel efficiency.

• Complete axle kit contains components for a full axle service (both sides).
• High-tension return springs prevent shoe drag and improve heat management.
• Reduces noise and vibration by ensuring correct shoe alignment within the drum.
• Restores factory-level braking performance and prevents premature shoe wear.
• Manufacturer Part Number: 370-54036

Fits 1966-1970 Chevrolet 50.

The DFC Rear Drum Brake Hardware Kit (370-47030) provides the critical components needed to restore consistent and reliable braking performance. Over time, heat cycles and environmental exposure cause drum brake springs to lose tension and clips to corrode, leading to uneven shoe wear, brake drag, or excessive noise. This kit replaces worn OE components to ensure proper shoe return and alignment within the drum.

• Designed to restore factory brake pedal feel and tensioning.
• Precision-engineered springs and pins resist heat-related fatigue and corrosion.
• Includes all necessary hardware for a complete rear axle service.
• Maintains proper shoe-to-drum clearance for improved safety.
• Manufacturer Part Number: 370-47030.

Fits select 1967-1977 Cadillac (Calais, DeVille, Fleetwood, Commercial Chassis) and 1974-1988 Jeep J20.

Restore the reliability and responsiveness of your rear drum brakes with the DFC 370-46001 Rear Drum Brake Hardware Kit. Over time, heat cycles and moisture cause return springs and hold-down pins to fatigue or corrode, leading to uneven shoe wear, excessive noise, and increased drag. This kit provides a complete set of premium-grade components to refresh the hardware for both wheels on the rear axle.

Engineered to meet or exceed original equipment standards, these components ensure proper shoe return and alignment. By maintaining correct tension and tolerances, this kit helps minimize drag for improved fuel efficiency and prevents premature wear on your brake shoes and drums. This is a complete axle kit, containing all necessary hardware for a total rear service.

• Manufacturer Part Number: 370-46001
• Service Level: Complete Axle Kit (fits both rear wheels)
• Material: Premium heat-treated steel components for maximum longevity
• Performance: Reduces noise and vibration while maintaining correct shoe alignment
• Compatibility: Replaces worn OE hardware on 11-inch or 12-inch drum systems depending on application

Fits select 1963-1970 Buick Electra, Estate Wagon, Invicta, LeSabre, Riviera, and Wildcat.

The DFC 370-45004 Front Drum Brake Hardware Kit is engineered to restore the factory performance and safety of your vintage Buick braking system. Over time, constant heat cycles and environmental exposure fatigue return springs and corrode hold-down pins, leading to uneven shoe wear, excessive drag, and unwanted chatter. This kit provides all necessary hardware to replace worn OE components, ensuring your brake shoes maintain proper alignment and tension.

• Axle Kit Coverage: One kit includes all necessary hardware for both the driver and passenger side front wheels.
• Premium Construction: Manufactured using high-grade materials for consistent spring tension and resistance to heat-related fatigue.
• Extended Brake Life: Prevents premature shoe wear by ensuring proper retraction and minimizing drag.
• Reduced NVH: Specifically designed to minimize noise and vibration for quieter operation.
• Manufacturer Part Number: 370-45004

Fits select 1959-1978 Jeep, Ford, Dodge, and AM General vehicles including Bronco, CJ5, CJ7, Wagoneer, and D100/W100 Pickups.

The DFC 370-44000 Drum Brake Hardware Kit is engineered to restore the performance and reliability of your vehicle's drum brake system. Over time, heat cycles and moisture cause return springs to lose tension and hold-down pins to corrode, leading to brake drag, uneven shoe wear, and increased vibration. Replacing hardware during every shoe service is critical for maintaining proper clearance and ensuring a consistent pedal feel.

Manufactured from premium materials to meet or exceed original equipment standards, this kit provides the essential components needed to refresh your braking system. By ensuring the brake shoes retract fully and remain properly aligned, this hardware kit helps improve fuel efficiency and extends the service life of your brake shoes and drums.

• Complete Axle Kit: Sold as a set for one axle; includes hardware for both the driver and passenger sides.
• Restores Tension: New springs ensure proper shoe retraction to eliminate drag and premature wear.
• Noise Suppression: Precision-engineered components help minimize noise and chatter during operation.
• Durable Build: Constructed from high-quality materials designed for longevity and thermal resistance.
• Part Number: 370-44000

Fits select 1969-1977 Chrysler, Dodge, and Plymouth models, including Charger, Coronet, Dart, Duster, and Valiant. This DFC drum brake hardware kit is engineered to restore your vehicle's braking system to factory-level performance by replacing worn, fatigued springs and pins that lose tension over time.

A complete brake service requires more than just new shoes; hardware fatigue is a primary cause of uneven shoe wear, excessive drag, and irritating brake noise. This kit provides the necessary components to ensure proper shoe return and seating, extending the life of your friction materials and maintaining optimal stopping power. Each kit is sold as a complete axle set to service both the driver and passenger sides of one axle.

• Manufactured using premium materials for longevity and consistent tension
• Prevents premature shoe wear by ensuring proper return and alignment
• Minimizes drag to improve fuel efficiency and prevent overheating
• Reduces noise, vibration, and harshness (NVH) during braking
• Complete axle kit includes hardware for both sides of the axle
• Manufacturer Part Number: 370-43002

Fits select 1962-1969 Dodge and Plymouth models, including A100, Charger, Coronet, Belvedere, and Satellite.

The DFC Drum Brake Hardware Kit (370-43001) provides the essential components required to restore the tension and alignment of your drum brake system. Over thousands of heat cycles, factory return springs and hold-down hardware lose their temper, leading to brake drag, increased heat, and premature shoe wear. This kit replaces those fatigued components to ensure consistent shoe retraction and reliable pedal feel.

• Manufactured using high-grade materials for maximum longevity and resistance to heat-related fatigue.
• Prevents premature shoe wear by ensuring proper retraction, extending the life of your brake components.
• Reduces brake drag to help maintain fuel efficiency and prevent drum overheating.
• Reduces operating noise and vibration by maintaining precise hardware tolerances.
• Conveniently sold as a complete axle kit to service both sides of the vehicle.
• Designed to meet or exceed OE specifications for fit and functionality.
• Manufacturer Part Number: 370-43001

Fits select 1962-1974 Checker, Chrysler, Dodge, Ford, Mercury, Oldsmobile, Plymouth, and Pontiac vehicles. This kit is designed to restore the mechanical efficiency of your drum brake system by replacing fatigued springs and worn hardware.

The DFC 370-17000 Drum Brake Hardware Kit is manufactured using premium materials to ensure consistent performance and longevity. By maintaining proper tension and alignment of the brake shoes, this kit helps prevent premature wear, minimizes parasitic drag for better fuel efficiency, and significantly reduces brake noise and vibration.

• Manufactured with high-quality materials for maximum durability and heat resistance
• Ensures proper brake shoe return to minimize drag and heat build-up
• Reduces operating noise and vibration during braking
• Sold as a complete axle kit for both the driver and passenger sides
• Engineered to meet or exceed OE specifications for fit and function
• Manufacturer Part Number: 370-17000

Fits select 2012-2023 Subaru Impreza, Forester, Crosstrek, and XV Crosstrek models.

The DFC 370-13006 Parking Brake Drum Brake Hardware Kit is engineered to restore the proper tension and alignment of your vehicle's parking brake system. Over time, heat cycles and environmental exposure cause OE springs and clips to lose tension or corrode, leading to brake drag, unwanted noise, and premature shoe wear. This comprehensive kit provides the high-grade components necessary to refresh the hardware on both sides of the rear axle.

• Manufactured using premium materials for longevity and consistent return spring performance.
• Prevents premature wear by ensuring the parking brake shoes retract fully and remain properly aligned.
• Minimizes drag to improve fuel efficiency and prevent unnecessary heat buildup in the rear drums.
• Reduces noise and vibration for smoother, quieter operation.
• Complete axle kit includes hardware for both the driver and passenger sides.
• Manufacturer Part Number: 370-13006

Fits 1986-1995 Suzuki Samurai models including Base, JA, JL, JS, JX, and JX SE. This complete rear axle kit is engineered to replace worn or fatigued OE components, restoring factory-level braking performance and consistency.

Drum brake hardware is often overlooked but critical for safety. Over time, return springs and mounting clips lose their tension due to heat cycles and corrosion, leading to dragging shoes, excessive heat, and premature lining wear. The DFC 370-01000 kit provides all the necessary springs, pins, and retainers to ensure your brake shoes engage and retract correctly.

• Manufactured from premium materials to resist heat and fatigue for long-term reliability
• Complete axle kit contains enough hardware for both the driver and passenger side rear drums
• Reduces brake noise, vibration, and pedal pulsation by maintaining proper shoe alignment
• Minimizes drag to improve fuel efficiency and prevent overheating of the drum assembly
• Direct replacement for factory hardware to simplify your next brake service
• Manufacturer Part Number: 370-01000

Fits 2005-2011 Mitsubishi Fuso FE models. This DFC (Dynamic Friction Company) rear brake wear sensor wire is engineered to maintain braking safety by providing accurate monitoring of your brake pad levels.

Constructed from premium, high-temperature resistant materials, this sensor is designed to withstand extreme operating environments up to 500°F. The highly conductive electrodes ensure precise signal transmission, matching the form, fit, and function of the original equipment. This part (MPN 341-72003) arrives ready to install with no modifications required, ensuring a direct-fit replacement of the factory sensor.

• Rated for high-temperature resistance up to 500°F
• Highly conductive electrodes for precise pad wear detection
• Direct-fit design matches OEM specifications
• Quality tested to ensure long-term reliability and performance
• Part Number: 341-72003
• Position: Rear

Fits select 2021-2025 BMW M2, M3, and M4 models.

Maintain the integrity of your braking system with the DFC Rear Brake Pad Wear Sensor. This sensor is engineered as a direct replacement for the original equipment, designed to meet the exact form, fit, and function required for the BMW M-Series chassis. It provides accurate, real-time monitoring of your brake pad levels to ensure timely maintenance and prevent rotor damage.

• High-Temperature Durability: Constructed from materials rated to withstand extreme operating temperatures up to 500°F.
• Precision Conductivity: Features highly conductive electrodes for accurate wear detection and consistent signal transmission.
• Direct Fitment: Ready for installation out of the box with no modifications required to the factory wiring harness.
• Reliability: Quality tested to ensure long-term performance under high-stress driving conditions.
• Manufacturer Part Number: 341-31092

Fits 2019-2025 BMW Z4 and 2020-2025 Toyota GR Supra models. This DFC front brake pad wear sensor is a direct replacement for your worn or triggered electronic sensor, restoring the vehicle's ability to accurately monitor remaining friction material levels.

Engineered to withstand the extreme thermal environment of performance braking systems, this sensor uses high-temperature resistant materials capable of operating in conditions up to 500°F. The highly conductive electrodes ensure a precise signal to the chassis control module the moment your pads reach their service limit, preventing rotor damage from metal-on-metal contact. Designed to meet the exact form, fit, and function of the original equipment, it installs into the factory caliper housing and wiring harness without modifications.

• Manufacturer Part Number: 341-31088
• Installation Position: Front
• Temperature Resistance: Up to 500°F
• Materials: High-temperature polymers and conductive electrodes
• Fitment: Matches OEM connector and lead length for a secure, plug-and-play installation

Fits select 2018-2023 Jaguar E-Pace and 2018-2025 Land Rover Discovery Sport and Range Rover Evoque.

This DFC rear brake wear sensor is engineered to provide precise monitoring of your brake pad thickness, ensuring your vehicle's safety system alerts you before the pads are fully depleted. Manufactured with highly conductive electrodes for accurate signal transmission, this sensor is a direct replacement for your worn or triggered factory unit.

Constructed from premium high-temperature resistant materials, this sensor is designed to maintain structural integrity and electrical performance in the harsh environment of the wheel well, withstanding operating temperatures up to 500°F. It is built to meet the same form, fit, and function as the original equipment for a seamless, no-modification installation.

• Replaces rear brake wear sensor (MPN 341-20016)
• Rated for high-temperature service up to 500°F
• High-conductivity electrodes for accurate wear level monitoring
• Direct-fit design requires no harness modifications
• Quality tested for long-lasting performance in extreme braking conditions

Fits 2017-2025 Alfa Romeo Giulia and Stelvio models, including Quadrifoglio, TI, Veloce, and Sprint trims.

The DFC Rear Brake Pad Wear Sensor is a direct-fit replacement engineered to monitor your vehicle's brake pad life with precision. Manufactured using high-temperature resistant materials, this sensor is designed to withstand intense operating environments up to 500°F. By utilizing highly conductive electrodes, it delivers accurate wear levels to the dashboard, ensuring you know exactly when service is required while maintaining the same form, fit, and function as the original equipment.

• Direct replacement for a seamless installation without modifications
• High-temperature construction rated for operating ranges up to 500°F
• Highly conductive electrodes for precise pad wear monitoring
• Designed to meet or exceed OEM specifications for form and fit
• Manufacturer Part Number: 341-16002

Fits select 2017-2025 Alfa Romeo Giulia and Stelvio models.

The DFC 341-16001 Front Brake Pad Wear Sensor is engineered to provide precise monitoring of your braking system's service life. Designed to meet exact OEM form, fit, and function, this sensor ensures your vehicle's electronic wear indicator triggers accurately as pads reach their service limit, preventing rotor damage from metal-to-metal contact.

Built to handle the extreme thermal environments of high-performance braking, this sensor is constructed from premium materials that withstand operating temperatures up to 500°F. The highly conductive electrodes maintain signal integrity for reliable, long-lasting performance under rigorous driving conditions.

• Direct replacement for factory sensor wire, no modifications required
• High-temperature resistant construction rated up to 500°F
• Precision-engineered electrodes for accurate pad wear detection
• Quality tested to ensure consistent conductivity and fitment
• Manufacturer Part Number: 341-16001

Fits select 2020-2025 Jaguar E-Pace, Land Rover Discovery Sport, and Range Rover Evoque models. This DFC front brake pad wear sensor is a precision-engineered direct replacement designed to restore the integrity of your vehicle's brake monitoring system.

Exposure to extreme braking temperatures can degrade standard wiring. This sensor is manufactured from high-temperature resistant materials capable of withstanding operating ranges up to 500°F. Featuring highly conductive electrodes, it ensures accurate data transmission to the vehicle's onboard computer, providing a reliable alert when pad thickness reaches its service limit.

• Precision Engineering: Designed to match OEM form, fit, and function for a seamless installation.
• High-Heat Tolerance: Rated for temperatures up to 500°F to prevent premature failure from thermal stress.
• Conductive Electrodes: Optimized for reliable electrical contact and precise wear detection.
• Direct Replacement: Manufacturer part number 341-11021; installs directly into factory mounting points with no modifications required.
• Quality Tested: Evaluated to ensure long-term durability and signal accuracy.