Fits select 2018-2025 Land Rover Defender 90, 110, 130, Discovery, Range Rover, and Range Rover Sport models.

Maintain the integrity of your braking system with the DFC Rear Brake Pad Wear Sensor. Engineered to provide the same form, fit, and function as the original equipment, this sensor accurately monitors your brake pad wear levels to ensure timely maintenance and safe operation. It serves as a critical component in your vehicle's safety system, triggering the dashboard warning light when pads reach their minimum thickness.

• High-Temp Construction: Manufactured from materials designed to withstand extreme braking environments with operating temperatures up to 500°F.
• Accurate Monitoring: Features highly conductive electrodes for precise pad wear detection.
• Direct Replacement: Designed for a no-modification installation, bolting directly to factory mounting points.
• Reliability: Quality tested to meet stringent performance standards for long-lasting service life.
• Manufacturer Part Number: 341-11018

Maintain the integrity of your vehicle's braking system with the DFC Rear Brake Pad Wear Sensor. This precision-engineered sensor (MPN: 341-11016) is designed to replace triggered or damaged OE units, ensuring your vehicle accurately monitors brake pad life and provides timely maintenance alerts.

Fits select 2017-2026 Jaguar F-Pace, XE, and Land Rover Range Rover Velar.

• High-Temperature Durability: Engineered from materials designed to withstand extreme high-heat environments up to 500°F.
• Accurate Monitoring: Features highly conductive electrodes that precisely detect pad wear levels to trigger vehicle alerts at the correct threshold.
• OEM Specification: Built to match the form, fit, and function of the original equipment for a seamless installation.
• Plug-and-Play: Supplied new and ready for immediate installation with no modifications or splicing required.

Specifications:
Manufacturer Part Number: 341-11016
Position: Rear
Temperature Rating: Up to 500°F

Fits 2019-2025 Porsche Macan Base, GTS, and S models.

This DFC brake pad wear sensor is a direct-fit replacement for the factory sensor wire on your Porsche's front braking system. Designed to provide accurate feedback on brake pad life, it triggers the dashboard warning light when pads reach a critical thickness. Each sensor is manufactured with high-conductivity electrodes to ensure reliable signal transmission and is housed in materials capable of withstanding operating temperatures up to 500°F.

• Manufacturer Part Number: 341-02055
• Placement: Front
• Temperature Resistance: Rated up to 500°F to prevent wire degradation in high-heat braking conditions
• Construction: High-conductivity electrodes for precise wear detection
• Installation: Direct replacement meeting OEM form, fit, and function; no modifications required

Fits 2021-2025 Porsche Macan (Base, S, T).

The DFC Rear Brake Pad Wear Sensor (341-02052) is engineered to restore the precision of your vehicle's brake monitoring system. This sensor replaces a tripped or damaged unit, ensuring the instrument cluster provides accurate notification when brake pads reach their service limit. This proactive warning helps prevent rotor scoring and maintains optimal stopping safety.

Manufactured to meet stringent OE form, fit, and function, the sensor utilizes high-temperature resistant materials capable of withstanding extreme operating environments up to 500°F. Highly conductive electrodes ensure a reliable electrical circuit for consistent wear monitoring.

• Direct replacement for the factory rear brake wear sensor
• High-temperature resistance rated up to 500°F
• Highly conductive electrodes for accurate pad wear monitoring
• New in box and ready to install with no modifications required
• Manufacturer Part Number: 341-02052

Fits select 2011-2018 Porsche 911, Cayenne, Panamera, and 2011-2014 Volkswagen Touareg models. This DFC brake pad wear sensor is a precision-engineered replacement for triggered or damaged OE sensors, designed to restore the integrity of your vehicle's brake monitoring system.

Constructed from advanced materials, this sensor is built to survive the harsh environment of the wheel well and braking system. It features high-temperature resistance up to 500°F, ensuring reliable signal transmission even during aggressive driving or heavy towing. The highly conductive electrodes provide accurate real-time feedback to your dashboard, notifying you precisely when pad thickness has reached its service limit.

• Manufactured to meet the exact form, fit, and function of the original equipment sensor
• High-temperature resistant construction rated to withstand up to 500°F
• Equipped with highly conductive electrodes for accurate wear detection
• Direct-fit design allows for a straightforward installation with no modifications
• Maintains the safety and reliability of the electronic brake wear warning system
• Manufacturer Part Number: 341-02039

Fits 1986-1991 Mazda RX-7 models including Base, Turbo, GXL, GTU, SE, and Convertible.

Restoring your braking system requires more than just new pads; worn hardware is a leading cause of brake drag, uneven wear, and annoying caliper noise. The DFC Premium Front Hardware Kit (340-80015) provides high-quality replacement components designed to maintain proper pad tension and alignment. Engineered with a low coefficient of friction, these components ensure the brake pads slide smoothly within the caliper bracket for consistent engagement and release.

• Manufactured for high heat resistance to prevent tension loss during aggressive braking
• Exceptional corrosion and chemical resistance for durability in harsh road conditions
• Designed for precise fitment and easy assembly/removal
• Replaces worn or fatigued OE hardware to reduce vibration and brake squeal
• Manufacturer Part Number: 340-80015

Fits select 2014-2024 Maserati Ghibli and Quattroporte models.

Ensure consistent braking performance and silent operation with the DFC 340-79000 Front Premium Brake Hardware Kit. This kit is engineered to replace worn OE components that have lost their tension or suffered from surface degradation due to heat cycles and road debris. Restoring your brake hardware is a critical step in a professional brake service to prevent pad drag, premature wear, and brake squeal.

• Low Friction: Features a low coefficient of friction to ensure smooth pad movement and consistent engagement.
• Extreme Resistance: Formulated for high heat and chemical resistance to maintain integrity under aggressive driving conditions.
• Corrosion Protection: Built to resist corrosion for easy assembly and long-term durability.
• Direct Fit: Designed to meet or exceed OE specifications for precise installation on the front axle.
• Manufacturer Part Number: 340-79000

Fits 2012-2020 Hino 155 models (Front or Rear applications).

The DFC Premium Brake Hardware Kit (MPN 340-76078) is engineered to restore factory-level braking performance by replacing critical hardware components that fatigue over time. In medium-duty applications, heat and road chemicals degrade the clips and springs that guide your brake pads. This kit ensures smooth pad movement and proper retraction, which prevents uneven wear and reduces brake drag.

• Low coefficient of friction allows for smooth pad engagement and retraction.
• Superior corrosion resistance protects against road salts and moisture.
• High heat and chemical resistance designed for demanding commercial operating environments.
• Precision engineering ensures easy assembly and removal during service.
• Critical for eliminating brake noise and maintaining consistent pedal feel.

Manufacturer Part Number: 340-76078

Fits select 1997-2020 Audi (A4, A6, A8, S4, S6, S8, TT, Allroad), Infiniti QX30, Mercedes-Benz (B Electric Drive, CLA250, GLA250), and Volkswagen (EuroVan, R32) models.

The Dynamic Friction Company (DFC) Premium Hardware Kit is designed to restore factory-level braking performance by replacing worn or fatigued brake hardware. Over time, heat cycles and environmental exposure cause clips and springs to lose their tension, leading to uneven pad wear, brake drag, or excessive noise. This kit provides the necessary components to ensure smooth pad movement and proper caliper function.

• Manufactured to strict tolerances for easy assembly and removal during service
• Engineered with a low coefficient of friction to promote consistent pad engagement
• Superior corrosion resistance for longevity in harsh climates
• Formulated for high heat and chemical resistance to maintain integrity under heavy braking
• Manufacturer Part Number: 340-74010

Fits select 2014-2020 Nissan Rogue and 2017-2022 Nissan Rogue Sport (S, SL, SV).

The DFC Premium Front Brake Hardware Kit (MPN: 340-67047) is engineered to restore smooth and quiet braking performance. Over time, factory brake hardware is subjected to extreme heat and road debris, leading to fatigue, corrosion, and sticking pads. This kit replaces worn OE components with high-quality hardware designed to ensure proper pad movement and consistent braking force.

• Low Coefficient of Friction: Facilitates smooth pad movement, reducing drag and preventing premature wear.
• Durability: Built for high heat and chemical resistance to maintain integrity under heavy braking loads.
• Corrosion Resistance: Treated to withstand moisture and road salts for a longer service life.
• Precision Fit: Designed for easy assembly and removal on the factory front brake calipers.
• Manufacturer Part Number: 340-67047

Fits select 2012-2019 Mercedes-Benz GL450, GL550, GLE43 AMG, GLE550e, GLS550, and ML550.

This DFC Premium Front Brake Hardware Kit (MPN 340-63051) is engineered to restore factory-level braking performance and eliminate noise. Worn or corroded hardware is a primary cause of pad dragging, uneven wear, and annoying brake squeal. Replacing hardware during every pad change ensures the calipers function as designed, providing smooth, consistent pad movement and retraction.

• Low Coefficient of Friction: Minimizes drag and reduces excessive heat buildup on the rotor surface.
• Corrosion & Chemical Resistance: Treated to withstand road salts and harsh chemicals for a longer service life.
• High Heat Resistance: Maintains structural integrity and tension under extreme braking temperatures.
• Easy Installation: Designed for exact fitment to facilitate rapid assembly and removal.
• Part Number: 340-63051

Fits 2004-2008 Acura TL Base and Type-S models. This DFC Premium Front Brake Hardware Kit (MPN: 340-58003) is engineered to restore factory-smooth operation and consistent pad movement in your braking system.

Over time, original equipment hardware loses its tension and becomes fouled by road debris and extreme heat, often leading to brake noise or uneven pad wear. This premium kit uses high-grade materials that provide a low coefficient of friction and exceptional resistance to chemicals and corrosion, ensuring a reliable service life even in harsh driving conditions.

• High heat resistance prevents hardware fatigue under heavy braking
• Corrosion and chemical resistant coating for long-term durability
• Low coefficient of friction ensures smooth brake pad travel and easy removal
• Direct replacement for OE hardware on front brake assemblies
• Manufacturer Part Number: 340-58003

Fits select 1965-1970 Cadillac Eldorado, Dodge Dart, Ford Thunderbird, Lincoln Continental, and Mercury Marauder.

The DFC Premium Brake Hardware Kit (MPN: 340-56015) is a critical component for restoring the factory-grade performance and safety of your vehicle's braking system. Over time, heat cycles and exposure to the elements cause OE hardware to lose tension or corrode, leading to uneven pad wear, brake drag, and excessive noise. This kit replaces worn springs and clips with precision-engineered components that ensure proper caliper alignment and pad movement.

• Superior Durability: Engineered with high heat and chemical resistance to maintain tension and integrity in harsh braking environments.
• Corrosion Protection: Treated for maximum resistance against moisture and road salts to prevent seizing and hardware failure.
• Smooth Operation: Features a low coefficient of friction to allow pads to slide freely, reducing drag and improving pedal feel.
• Hassle-Free Installation: Manufactured to exact OE specifications for easy assembly and removal during service.
• Complete Set: Includes all necessary front-end hardware for a comprehensive brake service.

Fits select 1974-1983 American Motors, Ford, Jeep, Lincoln, and Mercury vehicles, including Mustang II, Pinto, CJ5, CJ7, and F-150.

The DFC 340-56005 Front Premium Brake Hardware Kit is engineered to restore smooth caliper operation and ensure even pad wear. Brake hardware is often overlooked during a brake job, yet original clips and springs lose their tension over thousands of heat cycles, leading to brake drag, noise, and premature pad failure. This kit replaces worn OE components with premium-grade hardware designed for a precise fit and long-term durability.

• Manufactured to meet or exceed OE specifications for reliable braking performance
• Low coefficient of friction allows for smooth pad movement and consistent release
• High heat resistance maintains tension and prevents hardware fatigue
• Superior corrosion and chemical resistance to withstand harsh road conditions
• Designed for straightforward assembly and hassle-free removal during maintenance
• Manufacturer Part Number: 340-56005

Fits select 1968-1972 Ford Thunderbird, Lincoln Continental, Lincoln Mark III, and Mercury Colony Park, Marquis, and Monterey.

The DFC 340-56002 Front Premium Hardware Kit is engineered to restore the efficiency and safety of your vehicle's braking system. Over time, heat cycles and environmental exposure weaken factory clips and springs, leading to uneven pad wear and brake noise. This premium kit provides a direct-fit solution using materials designed to withstand the harsh conditions of the wheel well.

• Manufacturer Part Number: 340-56002
• Low Coefficient of Friction: Ensures smooth brake pad movement and consistent engagement.
• High Heat & Chemical Resistance: Prevents component fatigue and degradation under heavy braking.
• Corrosion Resistance: Durable finish helps prevent rust-seizing for easier future maintenance.
• Precision Fit: Engineered for easy assembly and removal, matching OE specifications.

Fits select 1988-2010 Audi, Ford, Jaguar, Mazda, Mercury, Saab, and Volkswagen vehicles (1.8T).

The DFC Premium Brake Hardware Kit is engineered to restore factory-level braking performance by replacing worn or corroded caliper components. Over time, heat cycles and environmental exposure fatigue the clips and pins, leading to uneven pad wear and increased brake noise. This kit provides the necessary hardware for a complete, professional service to ensure smooth pad movement and optimal caliper functionality.

• Low Coefficient of Friction: Ensures smooth piston and pad movement for consistent pedal feel.
• High Heat and Chemical Resistance: Maintains structural integrity under extreme operating temperatures and exposure to brake fluid.
• Corrosion Resistance: Protective finish prevents rust and seizing, facilitating easier assembly and future removal.
• Direct Fit: Designed to meet OE specifications for clearance and tension.
• Part Number: 340-54075

Fits select 2012-2021 BMW 2, 3, and 4 Series, M2, M3, M4, i8, and 2015-2019 Mini Cooper John Cooper Works. This DFC Front Premium Hardware Kit is engineered to restore factory braking performance by replacing worn, corroded, or heat-fatigued caliper components that can lead to brake drag, noise, and uneven pad wear.

Constructed to meet rigorous standards, this kit features high heat and chemical resistance to ensure long-term durability under demanding braking conditions. Each component is designed with a low coefficient of friction for smooth caliper operation and easy assembly during your next brake service.

• Manufacturer Part Number: 340-31036
• Position: Front
• Corrosion-resistant finish for extended service life
• High heat and chemical resistance to prevent component failure
• Optimized for low friction to ensure proper pad movement and release
• Designed for precise fitment and easy removal/installation

Fits select 2008-2026 Audi e-tron GT/S/RS, Bentley Flying Spur, Porsche 718, 911, Cayenne, Macan, Panamera, Taycan, and VW Touareg.

The DFC 340-02010 Front Premium Brake Hardware Kit is engineered to restore the performance of your vehicle's braking system by replacing fatigued or corroded OE hardware. Over thousands of miles, brake clips and pins lose their tension due to constant heat cycles, leading to uneven pad wear, increased noise, and reduced braking response. This premium kit ensures proper pad alignment and smooth movement within the caliper housing.

• Low Coefficient of Friction: Promotes smooth pad sliding to prevent brake drag and premature wear.
• High Heat Resistance: Materials selected to maintain structural integrity under the extreme thermal loads found in high-performance braking systems.
• Corrosion & Chemical Resistance: Treated to withstand road salt, moisture, and brake cleaners, preventing seizing and hardware failure.
• Precise Fitment: Designed for easy assembly and removal, matching factory specifications for a seamless installation.
• Manufacturer Part Number: 340-02010
• Placement: Front Axle

Fits select 2025-2026 BMW X3 (M50 xDrive / xDrive30).

Maintain the safety and performance of your braking system with the DFC Rear Brake Pad Wear Sensor. This direct-fit replacement is engineered to accurately monitor your vehicle's brake pad thickness, alerting the driver when pads reach their service limit to prevent rotor damage and ensure consistent stopping power.

• Direct OE replacement designed to meet factory form, fit, and function for a seamless installation.
• Manufactured with high-temperature resistant materials to withstand operating conditions up to 500°F.
• Equipped with highly conductive electrodes for precise wear level monitoring and reliable signal delivery.
• Built to endure harsh under-chassis environments and provide long-lasting service life.
• Ready to install out of the box with no modifications required.
• Manufacturer Part Number: 341-31100

Fits Porsche 911 Carrera (991.1) models equipped with Porsche Ceramic Composite Brakes (PCCB).

Manage brake system temperatures during high-performance driving with GiroDisc titanium pad shields. These shields are designed to sit between the brake pad backing plate and the caliper pistons, acting as a critical thermal barrier. By utilizing titanium's exceptionally low thermal conductivity, they significantly reduce the amount of heat transferred from the pads into the caliper pistons and brake fluid.

Installing these shields helps prevent brake fluid boil and protects caliper seals from heat-induced degradation, ensuring a more consistent pedal feel and improved reliability during track sessions or spirited driving.

• Reduces heat transfer to caliper pistons and brake fluid
• Precision-cut from high-grade titanium for maximum thermal resistance
• Thin-profile design fits behind pads without affecting caliper clearance
• Helps prevent fluid boil and maintains consistent brake pedal pressure
• Sold as a set for front calipers
• Manufacturer Part Number: TS-1741-4

Fits Porsche 911 Carrera (991.2) models equipped with Rear PCCB (Porsche Ceramic Composite Brakes).

GiroDisc titanium pad shields provide a critical thermal barrier between your brake pads and the caliper pistons. Designed for high-performance and track-driven vehicles, these shields significantly reduce heat transfer into the brake fluid, helping to prevent fluid boil and protecting sensitive caliper seals and dust boots from heat-induced degradation.

• Manufactured from high-strength Grade 5 titanium for maximum thermal resistance
• Acts as a heat sink to stabilize braking performance under extreme temperatures
• Laser-cut for precision fitment behind the brake pads
• Helps maintain firmer pedal feel by preventing fluid overheating
• Includes a complete set for both rear calipers
• Manufacturer Part Number: TS-1740-4

Fits select 2024-2026 BMW 530i, 530i xDrive, and X3 xDrive30 models.

The DFC Premium Front Brake Hardware Kit is engineered to restore your braking system to optimal performance by replacing worn, corroded, or fatigued hardware. Over time, the repeated heat cycles of braking cause factory clips and pins to lose their tension, leading to brake drag, uneven pad wear, and irritating noise or vibration. This kit provides high-quality replacement components designed to maintain proper pad alignment and facilitate smooth retraction.

• Restores factory-level braking performance and pad movement
• Helps eliminate brake squeal and chatter by reducing vibration
• Prevents premature pad wear caused by binding or dragging
• Manufactured to precise tolerances for a direct-fit replacement
• Complete kit for the front axle position
• Manufacturer Part Number: 340-31060

Fits select 2014-2017 Land Rover Discovery, Range Rover, and Range Rover Sport models.

The Brembo A00498 electronic wear sensor is a critical component for maintaining your vehicle's braking system integrity. This front brake wear sensor monitors the friction material thickness on your brake pads and triggers a dashboard warning once the pads reach their minimum service life. Built to exact OE specifications, this sensor ensures seamless communication with your Land Rover's onboard electronics, providing reliable data for driver safety.

Brembo utilizes high-quality wiring and connectors designed to withstand the extreme heat cycles and harsh environmental conditions found in the wheel well. For optimal performance and to ensure the monitoring system resets correctly, it is highly recommended to replace the wear sensor whenever new brake pads are installed.

• Manufacturer Part Number: A00498
• Direct OE Replacement: Designed to match the fit, form, and function of the factory sensor.
• Heat Resistant: High-grade wiring prevents insulation failure under heavy braking conditions.
• Electronic Precision: Accurate monitoring of pad wear to prevent rotor damage from metal-to-metal contact.
• Included: (1) Front Brake Pad Wear Sensor.

Fits select 2013-2021 Mercedes-Benz CLS53 AMG, E53 AMG, Maybach S550, Maybach S560, S450, S550, S550e, S560, S560e, SL400, SL450, and SL550.

Maintain your vehicle's braking performance and safety with the Brembo A00483 front brake pad wear sensor. This electronic component is engineered to monitor the remaining friction material on your brake pads, triggering a dashboard warning once they reach minimum thickness. Designed to meet or exceed OE specifications, this sensor ensures accurate reporting and reliable communication with your vehicle's onboard diagnostics.

• Precision manufactured to OE standards for direct fit and factory-level performance
• Heat-resistant wiring and connectors designed to withstand extreme brake temperatures and harsh environmental conditions
• Helps prevent rotor damage by providing timely notification of pad wear
• Designed for a clean, plug-and-play installation with factory harnesses
• Manufacturer Part Number: A00483

Brembo recommends replacing the wear sensor with every brake pad change to ensure the continued accuracy of your vehicle's brake monitoring system.

Fits select 2011-2018 Porsche Cayenne, 2011-2016 Porsche Panamera, and 2011-2015 Volkswagen Touareg Hybrid.

This Brembo Front Brake Pad Wear Sensor (A00451) is a critical electronic component for maintaining your vehicle's braking safety. Designed to meet or exceed original equipment specifications, this sensor monitors the friction material thickness on your front brake pads. When the pads reach their minimum service limit, the sensor completes a circuit to trigger the brake wear warning light on your dashboard, alerting you that a pad replacement is necessary.

Brembo recommends replacing the wear sensors with every brake pad change, as the high heat and friction of the braking system often degrade the sensors, leading to brittleness or electrical failure. This direct-fit replacement ensures your vehicle’s monitoring system remains functional and accurate.

• Direct OE Replacement: Engineered to the same tolerances and materials as the factory sensor for a seamless plug-and-play installation.
• Heat Resistance: Features high-quality wiring and heavy-duty connectors designed to withstand extreme brake temperatures and harsh road conditions.
• Precision Monitoring: Accurately signals the vehicle's ECU when brake pads require immediate attention.
• Manufacturer Part Number: A00451

Fits the 2011 GMC Sierra 3500 HD.

The Power Stop PBK096 Pin Boot/Bushing Kit provides the essential replacement hardware needed to maintain proper brake caliper movement. Over time, exposure to high heat and road debris can cause factory rubber boots to crack or swell, allowing moisture to enter and seize the caliper guide pins. This kit replaces those worn components to ensure the caliper slides freely, preventing uneven brake pad wear and maintaining consistent stopping power.

• Direct replacement for original equipment caliper hardware
• Constructed from high-quality rubber for superior heat and ozone resistance
• Ensures smooth guide pin travel and prevents caliper binding
• Critical for standard brake maintenance and rotor/pad service
• Manufacturer Part Number: PBK096

Fits select 1990-2009 Subaru (Legacy, Impreza, Forester, Outback, Baja) and 2005-2006 Saab 9-2X models. This DFC 370-13004 parking brake hardware kit is engineered to restore the functionality and safety of your vehicle's emergency brake system by replacing worn, fatigued, or corroded components.

Over time, the return springs, pins, and clips in your drum-in-hat parking brake system lose their tension or become seized due to road debris and heat cycles. This kit provides all the necessary hardware to ensure the parking brake shoes apply evenly and retract fully, preventing unwanted drag that can lead to overheating and decreased fuel efficiency. Each component is manufactured from premium materials to provide consistent performance and a quiet, vibration-free operation.

• Full Axle Coverage: Includes all necessary hardware for both the driver and passenger sides (complete axle kit).
• Premium Construction: Manufactured using high-quality materials for maximum longevity and resistance to brake heat and road salt.
• Precision Fit: Designed to match OE specifications for seamless installation in the factory drum-in-hat housing.
• Performance: Minimizes drag and prevents premature shoe wear while reducing noise and vibration.
• Part Number: 370-13004

Fits select 2013-2020 Hino trucks (Series 5).

The DFC 341-76001 Front Brake Pad Wear Sensor Wire is engineered to restore your vehicle's brake monitoring system to factory standards. This sensor provides critical feedback on brake pad thickness, ensuring you can perform maintenance before rotor damage occurs. Designed as a direct replacement, it installs without modifications and utilizes materials specifically chosen for heavy-duty operating environments.

• High-Temperature Durability: Manufactured from materials rated to withstand extreme operating temperatures up to 500°F.
• Accurate Monitoring: Utilizes highly conductive electrodes to provide precise signals for brake pad wear levels.
• OEM Fitment: Designed to meet the exact form, fit, and function of the original equipment sensor.
• Ready to Install: New-in-box component that requires no splicing or wiring modifications.
• Manufacturer Part Number: 341-76001

Fits select 2013-2020 Hino models.

Restore accurate brake system feedback with the DFC Rear Brake Pad Wear Sensor Wire. This replacement sensor is engineered to withstand the extreme heat of heavy-duty braking environments, ensuring your vehicle's dashboard alerts function correctly when service is required.

• Heat Resistance: Manufactured from premium materials rated to withstand operating temperatures up to 500°F.
• Precision Monitoring: Built with highly conductive electrodes to accurately detect and signal brake pad wear levels.
• OEM Specification: Designed to match the exact form, fit, and function of the original equipment sensor for a seamless installation.
• Ready to Install: New-in-box component that requires no modifications to the factory wiring harness or brake system.
• Reliability: Rigorously quality-tested to ensure consistent performance over the lifespan of the brake pads.
• Manufacturer Part Number: 341-76000

Fits select 2008-2026 Audi R8, RS3, RS5, and Lamborghini Huracan models.

Restore the responsiveness and silence of your front braking system with the DFC Premium Brake Hardware Kit. Over time, the constant heat cycles and exposure to the elements weaken the factory hardware, leading to caliper rattle, uneven pad wear, and excessive brake noise. This kit (MPN 340-73019) replaces worn OE components with precision-engineered hardware designed to maintain proper tension and alignment for the life of your brake pads.

• Corrosion Resistance: Specifically coated to withstand road salt and environmental chemicals.
• High Heat Resistance: Engineered to maintain mechanical properties under extreme braking temperatures.
• Low Coefficient of Friction: Ensures smooth brake pad movement for consistent engagement and release.
• Easy Assembly: Precision manufacturing ensures a direct fit for straightforward installation and removal.

Technical Specifications:
Manufacturer Part Number: 340-73019
Position: Front