Fits select 2019-2022 BMW 2 Series, 3 Series, 4 Series, Z4, and Toyota GR Supra (2.0T / 3.0T) with 13.6-inch (345mm) rear rotors.

EBC Racing RP-X Series brake pads are engineered for dedicated track use and competitive racing environments where heat management is critical. The RP-X compound maintains an exceptionally stable friction coefficient of 0.55 mu at temperatures exceeding 850°C (1,560°F), providing consistent stopping power and predictable pedal feel throughout the duration of a race.

These pads feature advanced stainless steel back plates to reduce heat transfer to the calipers and utilize the revolutionary Nucap NRS mechanical retention system. This system uses hundreds of tiny hooks to bond the friction material to the backing plate, preventing pad delamination under extreme thermal stress. While aggressive on the track, the RP-X compound is designed to be kinder to brake discs than many competing race pads.

• Manufacturer Part Number: DP82415RPX
• Friction Coefficient: 0.55 mu stable up to 850°C
• Nucap NRS mechanical hook pad retention system
• Heat-shielding stainless steel backing plates
• Designed for heavy track and dedicated race use
• Compatible with factory 13.6-inch (345mm) rear rotors

Fits 2014-2019 Chevrolet Corvette Z06 models.

DBA RP Performance brake pads are engineered specifically for dedicated track and circuit use where thermal loads consistently exceed 350°C (662°F). These pads utilize a carbon fiber-enhanced friction material to maintain high structural strength and a stable friction coefficient under extreme racing conditions.

• Operating Range: Optimized for 250°C to 750°C (482°F to 1382°F) for consistent stopping power during high-speed sessions.
• Carbon Fiber Reinforcement: Provides superior durability and prevents pad fade at peak temperatures.
• Slotted Design: Helps evacuate dust, gases, and debris to maintain a clean contact patch and improve temperature stability.
• Thermal Stability Profiling (TSP): Undergoes a specialized post-curing/scorching process to improve pad performance right out of the box.
• Application: Front brake system.
• Manufacturer Part Number: DB2375RP

Fits select 2003-2017 Infiniti and Nissan models, including G35, 350Z, FX35/45, M35/45, and QX50. EBC Brakes Bluestuff NDX is a high-friction sport and entry-level race material engineered for aggressive street driving and technical track use. Unlike traditional track pads that require significant heat to function, the Bluestuff NDX compound provides excellent bite from cold and a progressive feel, making it a versatile choice for enthusiasts who drive their cars to the circuit.

These pads feature a chemical interlayer for a superior bond between the friction material and the backing plate, ensuring durability under high thermal loads. Deep V-grooves are integrated into the pad surface to improve venting and efficiently clear dust and debris. This compound is ECE R90 safety approved, reflecting its performance and reliability across a wide range of operating temperatures.

• High-friction NDX compound suitable for street and track applications
• Exceptional cold bite and progressive braking modulation
• Deep V-grooves for improved cooling and dust management
• Chemical interlayer for maximum pad-to-plate bond strength
• Low heat transfer to calipers for consistent pedal feel
• ECE R90 brake safety regulation approved
• Manufacturer Part Number: DP51666NDX

The Wilwood BP-40 High-Temperature Racing Pad Set is a dedicated track-use compound engineered for environments requiring extreme thermal stability and aggressive stopping power. This BP-40 series provides a high initial bite and maintains a consistent friction coefficient across the high temperature ranges common in competitive motorsports, preventing brake fade during sustained high-speed sessions.

• Series: BP-40 Racing Compound
• Intended Use: Competitive racing and dedicated track applications
• High initial bite with predictable pedal feel
• Excellent friction stability at elevated operating temperatures
• Includes full set of pads for the specified caliper application
• Manufacturer Part Number: 150-40-7816K

The Wilwood BP-40 SmartPad Brake Pad Set (150-40-7812K) is a high-friction racing compound engineered for extreme thermal stability and aggressive initial bite. This set is designed for competition use where high torque and consistent pedal feel are required across a broad temperature range. The BP-40 compound is ideal for road racing, stock cars, and heavy-duty braking applications where brake fade resistance is paramount.

These pads are manufactured for calipers utilizing the 7812 plate shape, specifically the Forged Dynalite and Dynapro series equipped with a bridge bolt. At 0.49 inches thick, they provide a precise fit within the caliper housing to ensure optimal piston travel and heat dissipation.

• Brand: Wilwood
• Compound: BP-40 High-Friction
• Plate Shape: 7812
• Thickness: 0.49 inch (12.4mm)
• Caliper Compatibility: Dynapro and Dynalite (with Bridge Bolt)
• Manufacturer Part Number: 150-40-7812K

The Wilwood BP-40 SmartPad brake pad set (MPN 150-40-7420K) is a high-friction racing compound engineered for high-temperature environments and aggressive torque requirements. Specifically designed for competition use, the BP-40 compound provides a stable pedal feel and high response for asphalt racing and heavy-duty track applications.

These pads utilize the 7420 plate profile, making them a direct fit for Wilwood Forged Superlite (FSL), SL4, and SL6 series calipers. With a 0.80-inch (20.3mm) thickness, this set offers increased thermal capacity and wear life for endurance and high-demand braking scenarios.

• Manufacturer Part Number: 150-40-7420K
• Compound: BP-40 High-Friction SmartPad
• Plate Shape: 7420
• Thickness: 0.80 in (20.3 mm)
• Compatibility: Wilwood Forged Superlite (FSL), SL4, and SL6 series calipers
• Ideal Use: Asphalt track, road racing, and high-temperature performance applications

The Wilwood BP-40 Brake Pad Set (MPN 150-40-7416K) is a high-friction racing compound engineered for high-demand track applications requiring aggressive initial bite and consistent pedal feel. Designed around the 7416 pad plate profile, this set is a direct fit for Wilwood Forged Narrow Superlite (FNSL4/FNSL6) and Billet Narrow Superlite (BNSL4/BNSL6) caliper series.

The BP-40 compound provides a stable torque curve across a wide temperature range, ensuring predictable performance under heavy thermal loads. These pads are optimized for competition use, offering superior fade resistance and high-temperature durability compared to standard performance compounds.

• Manufacturer Part Number: 150-40-7416K
• Compound: BP-40 High-Friction Racing
• Pad Plate Shape: 7416
• Fits Caliper Series: FNSL4, FNSL6, BNSL4, BNSL6
• Application: Optimized for track and racing environments

The Wilwood BP-40 brake pad set (7112) is a high-friction, racing-grade compound designed for competition and extreme performance applications. Formulated to provide aggressive initial bite and a flat torque curve, these pads deliver consistent stopping power even under the extreme thermal loads of track environments. This set is engineered specifically to fit Wilwood Forged Dynalite, BDL, and DLII caliper series.

Utilizing the 150-40-7112K part number, these pads feature a 7112-style backing plate for a precise drop-in fit. The BP-40 material is ideal for drivers who require high torque and superior resistance to brake fade during high-speed deceleration and repeated hard braking cycles.

• Brand: Wilwood
• Part Number: 150-40-7112K
• Compound: BP-40 (High-Friction Racing)
• Pad Shape/Plate: 7112
• Caliper Compatibility: Forged Dynalite, BDL, and DLII series
• Performance: High torque, high bite, and excellent fade resistance

The Wilwood BP-40 SmartPad is a professional-grade, high-friction racing compound engineered for extreme thermal stability and aggressive initial bite. This pad set is designed specifically for Wilwood Dynapro Single (DPS) and Dynalite Single (DLS) calipers utilizing the 6812 plate profile. As a dedicated competition compound, BP-40 provides consistent torque control across a wide temperature range, making it a reliable choice for short track and road course environments where heavy braking is constant.

• Manufacturer Part Number: 150-40-6812K
• Compound: BP-40 SmartPad (High-Torque Racing)
• Caliper Compatibility: Wilwood Dynapro Single (DPS) / Dynalite Single (DLS)
• Plate Profile: 6812 shape
• Application: Designed for professional racing; not for street use

The Wilwood BP-40 6617 Brake Pad Set is engineered for high-performance and racing applications where consistent friction levels and high-temperature stability are critical. As a specialized high-friction compound, BP-40 provides an aggressive initial bite and predictable response throughout the braking cycle, ensuring confidence during severe-duty use. These .670-inch thick pads are designed to fit select racing calipers, offering the thermal resistance needed to prevent brake fade on the track.

• Manufacturer Part Number: 150-40-6617K
• Series: BP-40 High-Friction Racing Compound
• Thickness: 0.670 inches (17.0mm)
• Engineered for high thermal resistance and consistent pedal feel
• Ideal for track-only or severe-duty competition environments

This Wilwood BP-40 SmartPad Brake Pad Set (MPN 150-40-6211K) is engineered for high-demand racing environments where extreme temperatures are expected. The BP-40 compound provides a high friction coefficient with a rising torque curve as heat increases, making it a reliable choice for road racing, short tracks, and heavy-braking endurance events.

• Brake Compound: BP-40 High-Friction Racing Compound
• Pad Shape: 6211
• Caliper Compatibility: GP320 series
• Performance: High initial bite with consistent pedal feel and superior fade resistance
• Manufacturer Part Number: 150-40-6211K

Designed for professional-level braking, these pads offer predictable response under heavy thermal cycling. These pads are intended for competition use where high temperature stability is required; they are not recommended for street use due to noise and dust characteristics inherent to race-spec compounds.

This Wilwood Purple Compound brake pad set (MPN 150-12270K) is engineered specifically for high-performance racing applications utilizing aluminum rotors. The Purple compound provides the specialized friction characteristics required for aluminum surfaces, ensuring consistent stopping power and thermal stability where standard iron-rotor pads are unsuitable.

Designed as a direct fit for Wilwood GP200 calipers, these pads feature the 4908 profile and a 0.31-inch thickness. This complete axle set is manufactured to precise tolerances to ensure a clean install and reliable performance on the track.

• Manufacturer Part Number: 150-12270K
• Compound: Purple (Aluminum Rotor Specific)
• Pad Profile: 4908
• Caliper Fitment: Wilwood GP200
• Thickness: 0.31" (7.9mm)
• Set Quantity: Axle Set (2 Pads)

Fits 2016-2020 Ford Mustang Shelby GT350 and GT350R.

Engineered for the high-performance demands of the S550 Shelby platform, R1 Concepts Track/Street brake pads provide a versatile friction solution for drivers who split time between the road and the race track. These rear brake pads are developed to handle the increased thermal loads of track use while maintaining the necessary cold-bite characteristics and noise suppression required for daily street driving.

R1 Concepts utilizes over 20 years of braking expertise to produce a pad that offers consistent pedal feel and predictable modulation. Designed as a direct replacement for the factory rear units, these pads install into the OE calipers without modification, providing an immediate upgrade in stopping power and fade resistance.

• Specifically formulated for dual-use track and street applications
• Enhanced thermal stability to resist brake fade under high temperatures
• Direct fitment for factory rear braking systems
• Consistent friction profile for predictable stopping performance
• Manufacturer Part Number: 2000-1854-00

Fits 2016-2020 Ford Mustang Shelby GT350 and Shelby GT350R.

R1 Concepts Track/Street brake pads are engineered for enthusiasts who demand reliable stopping power across both daily driving and performance track conditions. Designed to handle the high thermal loads generated by the Shelby GT350's braking system, these front pads provide a balanced friction profile that maintains consistent pedal feel and bite during spirited use.

Built by R1 Concepts with over 20 years of braking expertise, this pad set serves as a direct-fit performance upgrade for the factory front calipers, ensuring your Mustang stays composed under heavy deceleration. Whether you are navigating a daily commute or a weekend track session, these pads deliver the versatility required for high-performance applications.

• Application: Front Brake Pads
• Optimized for dual-purpose Track and Street environments
• Direct replacement for factory equipment
• Manufacturer Part Number: 2000-1853-00

Fits 2014-2021 Mini Cooper S and 2016-2019 Mini Cooper Clubman (Base and ALL4).

This R1 Track/Street brake pad kit features a high-performance friction compound engineered for drivers who require consistent stopping power on the street and reliable heat management during aggressive track sessions. These pads provide a balanced bite profile to handle increased operating temperatures without sacrificing the cold-bite reliability needed for daily driving. Each kit includes a complete set of front axle pads and essential installation hardware for a direct-fit replacement of factory components.

• Manufacturer Part Number: 2000-1801-01
• Application: Front Axle
• Compound: Track/Street Dual-Purpose Performance
• Includes application-specific installation hardware
• Designed for high heat resistance and fade prevention

Fits 2008-2009 Pontiac G8 Base and GT models.

R1 Concepts Track/Street brake pads are engineered to bridge the gap between daily driving comfort and aggressive performance. Designed for enthusiasts who require consistent stopping power across a wide temperature range, these front brake pads utilize a high-friction compound that maintains its integrity during spirited driving and entry-level track sessions while remaining civil enough for the street.

• Manufacturer Part Number: 2000-1351-00
• Position: Front
• Series: Track/Street
• Application: 2008-2009 Pontiac G8 (Base and GT)
• High friction coefficient for improved bite and fade resistance

Fits 2006-2015 Mazda MX-5 Miata (all submodels including Sport, Club, and Grand Touring).

The R1 Concepts Track/Street series brake pads are engineered for driving enthusiasts who require a versatile friction material capable of handling both daily commutes and spirited track sessions. These front pads provide an increased friction coefficient and improved thermal stability compared to standard OE pads, ensuring consistent stopping power even as brake temperatures rise during aggressive use.

• Formulated for high heat resistance to minimize brake fade during performance driving
• Optimized for a strong initial bite and predictable modulation
• Direct replacement for factory front brake pads
• Low-noise compound suitable for street use
• Manufacturer Part Number: 2000-1179-00
• Position: Front

Fits select 2002-2012 Subaru (Impreza, WRX, Forester, Legacy, Outback, Baja) and 2005-2006 Saab 9-2X.

Engineered for drivers who demand consistent stopping power in both daily commuting and spirited track environments, the R1 Concepts Track/Street Series front brake pads bridge the gap between performance and daily driveability. These pads are formulated to handle the higher thermal loads encountered during performance driving while maintaining the essential cold-bite characteristics required for safe street use.

• High friction coefficient for improved stopping power and shorter braking distances
• Advanced formulation designed to resist brake fade under high-temperature conditions
• Provides a consistent pedal feel for better modulation on the street or the track
• Direct replacement for factory front brake pads
• Manufacturer Part Number: 2000-0929-00

Fits select 2002-2021 Honda Accord, Civic, CR-V, CR-Z, Element, Fit, Pilot, and Acura ILX. This front brake pad set is engineered for drivers who require a high-performance friction solution capable of handling both aggressive street driving and occasional track use. Replacing the factory front pads, this set provides the consistent bite and thermal stability needed to resist brake fade under high-heat conditions.

Developed by R1 Concepts, these pads bridge the gap between daily reliability and competition-level performance. They are designed to fit directly into the original equipment (OE) calipers, ensuring a straightforward installation process while providing a significant upgrade in stopping power and pedal feel over standard friction compounds.

• Dual-purpose compound optimized for both street driveability and track-day heat cycles
• Direct replacement for front factory brake pads
• Enhanced friction levels for shorter stopping distances and improved modulation
• Reduced brake fade during high-temperature operation
• Manufacturer Part Number: 2000-0914-00

Fits 2001-2005 Mazda Miata (Base, LS, Mazdaspeed, SE, and Shinsen).

Engineered by R1 Concepts, these front brake pads are designed for enthusiasts who require a dual-purpose friction solution for both spirited street use and light track applications. With a focus on thermal stability and consistent bite, these pads bridge the gap between daily drivability and the increased demands of performance driving on the NB chassis.

• Manufacturer Part Number: 2000-0890-00
• Position: Front Axle
• Performance Level: Track/Street Hybrid
• Fitment: Replaces OE front pads on select 2001-2005 Miata submodels
• Developed with over 20 years of braking system expertise for precise tolerances

Fits select 2002-2020 Infiniti and Nissan models including the 350Z, 370Z, G35, G37, M35/M45/M56, and Q70 (see full fitment list below).

Engineered for drivers who demand consistent stopping power in both aggressive street environments and light track applications, these R1 Concepts Front Track/Street Brake Pads bridge the gap between daily driveability and performance. These pads are designed to provide a high friction coefficient for improved bite while maintaining the thermal stability required to resist brake fade during repeated high-speed decelerations.

As a direct replacement for your factory front pads, this set installs into the original equipment calipers without modification. R1 Concepts utilizes advanced friction compounds that balance performance with noise and dust management, making them an ideal choice for the enthusiast who drives their car to the track and back.

• Performance hybrid compound optimized for street and light track use
• High-friction coefficient for reduced stopping distances
• Designed for consistent pedal feel and thermal resistance
• Front axle set includes pads for both driver and passenger side
• Manufacturer Part Number: 2000-0888-00

Fits 2000-2003 Audi A8 Quattro Base and L models.

The R1 Track/Street Series Front Brake Pad and Hardware Kit is engineered for drivers who demand consistent stopping power in both daily driving and spirited track environments. This hybrid friction compound bridges the gap between high-performance street pads and dedicated track pads, offering improved thermal stability and fade resistance during repeated high-speed decelerations. This kit provides a complete solution for a front axle service, ensuring the braking system maintains its integrity under high heat loads.

• Performance Friction: Hybrid compound provides a strong initial bite and a high coefficient of friction for reliable stopping power.
• Thermal Stability: Designed to resist brake fade and maintain pedal feel across a wide temperature range.
• Complete Hardware Kit: Includes necessary installation hardware to replace worn OE components for a quiet, secure fit.
• Direct Fit: Precision-engineered to match the factory caliper dimensions on the 2000-2003 Audi A8 Quattro.
• Manufacturer Part Number: 2000-0839-11

Fits select 1999-2019 Nissan Altima, 350Z, Sentra, Juke, Maxima, and Infiniti G35 and I30 models. Designed for drivers who demand consistent stopping power in both daily driving and performance environments, these R1 Concepts Track/Street series front brake pads bridge the gap between high-performance track use and reliable street manners.

These pads are engineered to handle increased thermal loads while maintaining a stable friction coefficient, reducing brake fade during spirited driving or track sessions. As a direct-fit replacement for the factory components, they install onto original equipment calipers with no modifications required, restoring and upgrading your vehicle's braking response and pedal feel.

• Manufacturer Part Number: 2000-0815-00
• Position: Front
• Series: Track/Street
• Application: Dual-purpose friction compound optimized for performance street and light track use
• Installation: Direct bolt-on replacement for OE pads

Fits select 1989-2006 Nissan, Hyundai, Infiniti, and Kia models, including 240SX, Elantra, Sonata, and Sentra. Please refer to the fitment table for specific submodel compatibility.

The R1 Concepts Track/Street series brake pads are engineered for drivers who demand consistent performance across diverse driving conditions. These front pads bridge the gap between daily reliability and aggressive track-day performance, utilizing a friction formula designed to handle higher thermal loads without sacrificing the initial bite required for street safety. Whether you are navigating stop-and-go traffic or pushing through corners on a spirited weekend drive, these pads deliver reliable stopping power.

• Optimized Friction: Advanced formulation provides high heat resistance to significantly reduce brake fade during heavy use.
• Dual-Purpose Performance: Maintained cold-bite characteristics ensure predictable stopping power during standard daily commuting.
• Direct Fit: Precision-manufactured to match OE specifications for a straightforward installation into factory front calipers.
• Complete Front Set: Includes all necessary pads for both the front driver and passenger side wheels.
• Manufacturer Part Number: 2000-0700-00

Fits 1992-1995 Toyota MR2 Turbo models.

Bridge the gap between daily drivability and weekend performance with R1 Concepts Track/Street series front brake pads. Engineered for the enthusiast who demands more from their braking system, these pads utilize a specialized friction compound that maintains a consistent bite across a wide temperature range. Whether you are navigating heavy traffic or pushing through high-heat cycles on a spirited drive, these pads deliver reliable stopping power with reduced fade compared to standard OE alternatives.

Constructed to match the exact physical dimensions of your factory front calipers, these pads ensure a direct-replacement fit without modification. The hybrid formulation is designed to provide the higher friction coefficient needed for aggressive driving while maintaining the low-noise and low-dust characteristics essential for street use.

• Part Number: 2000-0582-00
• Position: Front Axle
• Application: Track/Street Hybrid
• Fitment: 1992-1995 Toyota MR2 Turbo
• Designed for high-heat resistance and consistent friction recovery

Fits Honda Civic Type R (FK8) models.

Project Mu HC M1 (Hyper Carbon) brake pads are engineered to provide the FK8 Civic Type R with enhanced stopping power and superior thermal stability. Designed for enthusiasts who demand consistent performance during spirited street driving and occasional track use, these rear pads offer a predictable friction coefficient and excellent pedal feel.

• Manufacturer Part Number: PHMR385
• Position: Rear Axle
• Compound: HC M1 (Hyper Carbon)
• Application: High-performance street and light track use
• Designed for improved heat resistance and fade prevention over OE pads

Fits select 1994-2011 Acura Integra and RSX, and Honda Accord, Civic, and S2000.

Project Mu CLUB RACER rear brake pads are engineered for dedicated track use and competitive club racing. These pads provide the high-temperature stability and consistent friction coefficient required to maintain braking performance during repeated hard decelerations on the circuit. Developed through motorsport testing, the CLUB RACER compound offers precise modulation and excellent resistance to thermal fade, ensuring predictable stopping power when temperatures rise.

• Manufacturer Part Number: PCR09R389
• Series: CLUB RACER
• Placement: Rear Axle
• Designed for circuit racing and high-performance track days
• Direct replacement for factory rear brake pads
• Engineered for thermal stability and endurance under race conditions

Fits 2017-2021 Honda Civic Type R (FK8).

Project Mu CLUB RACER rear brake pads are engineered specifically for the rigorous demands of circuit use and sprint racing. Designed to provide a consistent friction coefficient across a wide temperature range, these pads solve the common issue of brake fade during aggressive track sessions. The CLUB RACER compound offers the high initial bite and precise modulation required to manage the weight and braking bias of the FK8 chassis effectively.

• Manufacturer Part Number: PCR09R385
• Series: CLUB RACER
• Position: Rear
• Compound: Super Graphite Metallic
• Intended Use: Track, Sprint Racing, and Time Attack
• Direct replacement for OE rear brake pads
• Enhanced thermal stability for consistent pedal feel

Fits 2017+ Honda Civic Type R (FK8).

The Project Mu Club Racer series is engineered for the dedicated track enthusiast and club racer. These front brake pads provide the high-temperature stability and consistent friction levels required for repeated heavy braking on the circuit. Designed to minimize fade during intensive sessions, they offer a firm pedal feel and excellent modulation for technical driving.

• Manufacturer Part Number: PCR09F506
• Position: Front
• Series: Club Racer
• Engineered for high-heat circuit performance and endurance
• Direct replacement for factory pads on the FK8 Civic Type R Brembo calipers

Fits 2002-2006 Acura RSX Type S, 2000-2009 Honda S2000, and 2006-2009 Honda Civic Si. The Project Mu Club Racer Advance front brake pads are engineered specifically for the demands of circuit racing and high-performance track driving. These pads are designed to provide consistent friction and reliable pedal feel even under the extreme thermal loads experienced during repetitive high-speed braking.

• Position: Front Axle
• Series: Club Racer Advance
• Engineered for high-temperature stability and circuit use
• Direct fitment for factory brake calipers
• Manufacturer Part Number: PCR09F336AD