Fits select 2014-2024 Maserati Ghibli and Quattroporte models.

The DFC Front Drilled Brake Rotor (MPN 620-79004) is engineered to provide reliable stopping power and enhanced thermal management. Each rotor is manufactured using premium G3000/G11H18 iron castings, ensuring high strength and stability even under the thermal stress of heavy braking. The cross-drilled surface facilitates heat and gas dissipation, maintaining a clean contact patch for consistent performance.

• Premium Materials: Cast from G3000/G11H18 iron for superior durability and structural integrity.
• OE Vane Configuration: Matches original equipment vane design to ensure maximum heat dissipation and airflow.
• Precision Balanced: 100% mill-balanced to eliminate vibration and ensure smooth engagement at all speeds.
• Direct Fit: CNC-machined to tight tolerances to meet exact OEM form, fit, and function.
• Non-Directional Finish: Promotes a faster break-in period and smoother stops immediately after installation.

Fitment Specifications:

• 2014-2024 Maserati Ghibli (Base, GT, Modena, Modena Q4, Modena Ultima Q4, S, S Q4, Trofeo, Trofeo 334 Ultima)
• 2014-2022 Maserati Quattroporte (GT, Modena, Modena Q4, S, S Q4)

Fits 2013 Mercedes-Benz GL450 and GL550 (Base and 4Matic).

The DFC Rear Drilled Brake Rotor (MPN 620-63149) provides enhanced thermal management and consistent braking performance for full-size luxury SUVs. Engineered from premium G3000/G11H18 metallurgical iron castings, these rotors are built for high tensile strength and long-term structural stability under heavy braking loads.

• High-Carbon Castings: G3000/G11H18 iron provides superior durability and resistance to thermal cracking.
• OE Vane Configuration: Follows the factory internal vane design to ensure maximum heat dissipation and maintain proper airflow.
• Cross-Drilled Surface: Designed to vent gases and water away from the pad surface for improved bite and cooling.
• Precision Mill-Balanced: 100% mill-balanced to eliminate vibration and ensure smooth operation at all speeds.
• CNC-Machined: Manufactured to the tightest tolerances for a perfect bolt-on fit without vehicle modification.
• Non-Directional Finish: Promotes faster pad bedding and reduces noise during the initial break-in period.

Fits 2006-2013 Chevrolet Corvette Z06, Grand Sport, and 427 submodels.

Improve your Corvette's braking performance and heat management with the DFC Front Drilled Brake Rotor (MPN 620-47034). These rotors are engineered from premium G3000/G11H18 iron castings to provide superior strength, stability, and long-term durability under high-performance driving conditions. The cross-drilled design enhances surface cooling and helps vent gases, while the original equipment (OE) vane configuration ensures maximum heat dissipation to prevent brake fade.

Each rotor is CNC-machined to the tightest tolerances and 100% precision mill-balanced to ensure smooth, vibration-free stopping at any speed. The non-directional finish promotes a faster break-in period and consistent pad contact for reliable performance right out of the box.

• Premium G3000/G11H18 iron castings for thermal stability
• OE vane configuration for maximum cooling efficiency
• 100% precision mill-balanced to eliminate vibration
• CNC-machined for exact fitment and tight tolerances
• Non-directional finish for faster pad break-in
• Direct replacement for factory rotors; no modifications required
• Manufacturer Part Number: 620-47034

Fits select 2021-2025 BMW M2, M3, and M4 (Base, Competition, xDrive, CS, and CSL models). This DFC drilled brake rotor is engineered as a precision performance replacement for your front right wheel position, matching the exact form and function of the original equipment while improving thermal efficiency.

Constructed from premium G3000/G11H18 iron castings, this rotor is designed for high-stress environments where strength and stability are critical. The cross-drilled surface helps vent heat and gases, reducing fade during spirited driving. Each unit is 100% precision mill-balanced to eliminate vibration and CNC-machined to ensure a direct fit with no modifications required.

• Material: High-quality G3000/G11H18 iron castings for long-term durability
• Internal Cooling: OE vane configuration for maximum heat dissipation
• Precision Balancing: 100% mill-balanced to provide smoother stopping at all speeds
• Surface Finish: Non-directional finish facilitates faster pad break-in
• Installation: CNC-machined to tight tolerances; ready to install out of the box
• MPN: 620-31193D

Fits select 2021-2025 BMW M2, M3, and M4 models (Base, Competition, CS, CSL, and xDrive trims).

The DFC Left Front Drilled Brake Rotor is engineered to maintain high-performance braking standards for the modern G-Series M-chassis. Cast from premium G3000/G11H18 iron, these rotors provide the structural integrity and thermal stability required for the aggressive heat cycles encountered in performance driving. The cross-drilled design allows for efficient gas and heat expulsion, reducing fade and maintaining a consistent friction coefficient.

Each rotor features an Original Equipment (OE) vane configuration to ensure proper internal airflow and maximum heat dissipation. To ensure a smooth, vibration-free experience at high speeds, every unit is 100% precision mill-balanced. The non-directional finish promotes a faster break-in period and ensures uniform pad contact from the first stop.

• Material: Premium G3000/G11H18 Iron Castings for superior durability
• Precision: CNC-machined to tightest tolerances for exact fitment
• Balancing: 100% mill-balanced to eliminate rotational vibration
• Finish: Non-directional finish for accelerated pad bed-in
• Vane Style: OE-matched vane configuration for optimal cooling
• Position: Left Front
• Part Number: 620-31192D

Fits 1999-2024 Porsche 911 models, including Carrera, Carrera S, Carrera 4/4S, Targa 4/4S, Turbo/Turbo S, and GT2/GT3.

The DFC Left Rear Drilled Brake Rotor is engineered for enthusiasts seeking a direct-replacement performance upgrade. Designed to meet strict OEM standards for form and function, this rotor is manufactured from premium G3000/G11H18 iron castings. These high-grade metallurgy standards provide the necessary strength and thermal stability required for the Porsche 911's braking system. The cross-drilled design aids in heat dissipation and gas venting, while the OE vane configuration ensures maximum airflow through the rotor core.

• Premium G3000/G11H18 iron castings for superior durability and heat resistance.
• 100% precision mill-balanced to ensure smooth, vibration-free stopping at all speeds.
• CNC-machined to exact tolerances for a perfect factory fit.
• Non-directional finish promotes faster pad bedding and consistent friction levels.
• Direct replacement for OE rotors with no modifications required for installation.
• Manufacturer Part Number: 620-02067D

Fits select 1999-2024 Porsche 911 models, including Carrera, Targa, Turbo, GT2, and GT3. Please refer to the fitment table to confirm compatibility with your specific submodel and year.

The DFC 620-02066D Right Rear Drilled Brake Rotor is engineered for drivers who require superior thermal management and consistent stopping power. Constructed from premium G3000/G11H18 iron castings, this rotor offers the strength and stability necessary for high-performance braking systems.

• Precision Machined: CNC-machined to the tightest tolerances to meet the exact form, fit, and function of your vehicle's factory rotors.
• Advanced Cooling: The cross-drilled design allows for maximum heat dissipation and helps clear gases and debris from the pad surface.
• Mill-Balanced: 100% precision mill-balanced to ensure smooth operation and eliminate vibration at any speed.
• Non-Directional Finish: Features a specialized finish to promote faster brake pad break-in and smoother stops immediately after installation.
• OE Vane Configuration: Utilizes original equipment vane architecture to maintain proper airflow and cooling efficiency.
• Part Number: 620-02066D

Each rotor is ready to install out of the box with no modifications required for a direct replacement of the factory hardware.

Fits select 1999-2012 Porsche 911, Boxster, and Cayman models.

Upgrade your vehicle's braking performance with the DFC 620-02033D Right Front Drilled Brake Rotor. Engineered for consistent stopping power and superior thermal management, this rotor is constructed from premium G3000/G11H18 metallurgy for exceptional strength and stability. The cross-drilled design aids in gas and heat dissipation, significantly reducing brake fade during performance driving while maintaining structural integrity.

• Manufactured with premium G3000/G11H18 iron castings for long-term durability and resistance to warping.
• Original Equipment (OE) vane configuration ensures maximum heat dissipation and airflow.
• 100% precision mill-balanced to eliminate vibration and ensure a smooth stop at any speed.
• Non-directional finish promotes a faster break-in period and immediate pad-to-rotor contact.
• CNC-machined to tight tolerances for a direct fit with no modifications required.
• Manufacturer Part Number: 620-02033D

Fits select 1999-2012 Porsche 911, Boxster, and Cayman models. This DFC left front drilled brake rotor is engineered for high-performance stopping power and heat management.

Constructed from premium G3000/G11H18 iron castings, this rotor provides the strength and thermal stability required for spirited driving. To ensure maximum cooling efficiency, it features an Original Equipment (OE) vane configuration that matches the factory heat dissipation profile. Every rotor is 100% precision mill-balanced to eliminate vibration and provide smooth engagement throughout the brake pedal stroke.

• Material: Premium G3000/G11H18 iron castings for durability
• Finish: Non-directional finish for faster pad break-in and consistent friction
• Balance: 100% mill-balanced to zero vibration at all speeds
• Machining: CNC-machined to exact tolerances for a perfect fit
• Configuration: Drilled for improved gas venting and wet-weather performance
• MPN: 620-02032D

Authoritative Fitment:

• 1999-2008 Porsche 911 (Carrera, Carrera 4, Targa 4)
• 2000-2012 Porsche Boxster (Base, Roadster S, RS 60 Spyder, S, S Special Edition, Spyder)
• 2006-2012 Porsche Cayman (Base, R, S)

Fits 1982-1989 Porsche 911 Carrera, SC, Speedster, and Turbo Carrera.

The DFC Left Front Drilled Brake Rotor (MPN 620-02013D) is engineered to deliver reliable stopping power and thermal stability for classic air-cooled Porsche models. Cast from premium G3000/G11H18 metallurgy, these rotors provide the structural integrity required for performance driving while maintaining the exact form and fit of the original equipment. The cross-drilled surface improves heat dissipation and aids in gas venting, keeping the braking system cooler under load.

• Premium G3000/G11H18 iron castings for maximum strength and durability
• OE vane configuration ensures proper airflow and heat dissipation
• 100% precision mill-balanced to eliminate vibration at any speed
• Non-directional finish facilitates faster pad break-in and smoother stops
• CNC-machined to the tightest tolerances for a direct-fit replacement
• Directly replaces factory components with no modifications required

Each rotor is quality-tested to ensure long-lasting performance and consistent pedal feel, making it an ideal choice for restoring or maintaining the braking performance of your 1982-1989 Porsche 911.

Fits 1982-1989 Porsche 911 (SC, Carrera, Speedster, and Turbo Carrera).

This DFC (Dynamic Friction Company) Right Front Drilled Brake Rotor is engineered to restore and enhance the braking performance of your G-Body Porsche 911. Manufactured using premium G3000/G11H18 iron castings, these rotors provide the necessary tensile strength and thermal stability required for consistent stopping power. The cross-drilled pattern aids in gas venting and heat dissipation, helping to maintain a clean pad surface and reduce brake fade during spirited driving.

• Precision Manufacturing: CNC-machined to tight tolerances for an exact OE form, fit, and function.
• Thermal Management: Features an original equipment (OE) vane configuration to maximize airflow and heat dissipation.
• Vibration-Free Performance: 100% precision mill-balanced to ensure smooth operation and zero vibration at any speed.
• Faster Break-In: Finished with a non-directional ground surface to promote quicker pad bed-in and smoother initial stops.
• Direct Replacement: Replaces factory unit 620-02012D; ready to install with no modifications required.

Fits select 2007-2013 Porsche 911 GT3, GT3 RS, Turbo, and Turbo S models (3.8L) equipped with standard steel brake systems (without Ceramics).

Restore the braking performance and thermal management of your Porsche 911 with this SHW Drilled and Dimpled MB series brake rotor. Designed as a precision-engineered direct replacement for the left rear position, this rotor features a cross-drilled and dimpled surface pattern that effectively vents hot gases and clears brake dust debris during high-performance driving. Built to match OE tolerances, it ensures consistent pedal feel and reliable stopping power for your 997-generation 911.

• Position: Left Rear
• Design: Drilled & Dimpled MB Series
• Compatibility: Replaces OE part number 99735240502
• Brake System: For vehicles without Ceramic Brake (PCCB) options
• Manufacturer Part Number: PRL39977

Fits select 2020-2025 BMW X3 M, X3 M Competition, X4 M, X4 M Competition, and X4 M40i (3.0L).

Restore the factory braking performance and heat management of your BMW with this premium SHW Performance rear brake rotor. This lightweight, cross-drilled rotor is engineered as a direct replacement for the right rear position, maintaining the precise tolerances and thermal capacity required for M-series vehicles. The cross-drilled design facilitates rapid outgassing and improves initial bite in wet conditions, while the lightweight construction reduces unsprung mass for better handling and suspension response.

• Position: Right Rear
• Design: Cross-Drilled Lightweight Composite
• Direct replacement for OE part number: 34118054828
• Manufacturer Part Number: BRR43504
• Compatible with factory calipers and pad compounds

Fits select 2020-2025 BMW X3, X4, X5, and X6 models (3.0L).

This SHW Performance lightweight brake rotor is a direct-fit replacement for the right front position, engineered to deliver high-performance stopping power and superior thermal management. The cross-drilled friction surface effectively vents hot gases and clears debris, ensuring consistent pad bite during demanding driving conditions. Utilizing a pinned lightweight construction, this rotor reduces unsprung mass compared to standard cast components, which enhances suspension articulation and steering response.

• Manufacturer Part Number: BFR43502
• OEM Reference Number: 34118054826
• Position: Right Front
• Rotor Design: Cross-Drilled, Lightweight
• Direct OE replacement for factory mounting

Fits select 2020-2025 BMW X3, X4, X5, and X6 models (3.0L). This SHW Performance lightweight brake rotor is a precision-engineered replacement designed to restore and enhance the braking dynamics of your vehicle.

Constructed to meet or exceed original equipment specifications, this rotor features a cross-drilled surface that effectively vents heat and brake gases, ensuring consistent stopping power even under high-load conditions. The lightweight pin-drive design reduces unsprung mass, contributing to improved suspension response and better overall handling. This component is specifically designed for the left front position.

• Direct replacement for OE part number 34118054825
• High-performance cross-drilled surface for superior heat dissipation
• Lightweight construction reduces unsprung weight
• Directional venting for optimized airflow
• Durable finish for corrosion resistance
• Manufacturer Part Number: BFL43501

Fits select 2005-2019 Audi A3, TT, and TTS, along with Volkswagen Beetle, CC, Eos, Golf, GTI, Jetta, Passat, and Rabbit models (2.0T).

This Brembo Front Disc Brake Kit (MPN: KTX0151) is a comprehensive solution designed to restore original braking performance and improve driving comfort. This kit combines high-performance rotors with Prime Ceramic brake pads to deliver consistent stopping power under a variety of driving conditions while maintaining a clean, quiet operation.

• High Carbon Cast Iron Rotors: These rotors utilize high-carbon material for a higher damping coefficient, effectively reducing vibration and noise. The material also improves heat conduction to shorten cooling times and prevent brake fade during thermo-mechanical stress.
• Prime Ceramic Brake Pads: Specifically formulated to minimize noise and vibration, these pads offer low dust emission to keep your wheels cleaner for longer and reduce friction wear.
• Precision Engineering: Designed to match the material and tolerances of original equipment (OE) components, ensuring a direct fit and seamless integration with your vehicle's braking system.
• Manufacturer Part Number: KTX0151

Fits select 2007-2013 Porsche 911 GT3, GT3 RS, Turbo, and Turbo S models (3.8L) equipped with standard iron braking systems.

This SHW Right Rear Drilled-Dimpled MB Brake Rotor is a direct replacement for 997-chassis vehicles not equipped with Carbon Ceramic (PCCB) options. Engineered to handle the thermal loads of high-output engines, this rotor features a drilled and dimpled surface to effectively vent brake gases and prevent pad glazing during aggressive deceleration. The MB series construction ensures precise fitment and thermal stability for consistent pedal feel.

• Position: Right Rear
• Rotor Type: Drilled-Dimpled MB Series
• Brake System: For vehicles without Ceramic Composite Brakes
• Compatible with: 2007-2013 Porsche 911 (3.8L)
• Manufacturer Part Number: PRR39978

Fits select 2016-2025 Porsche 718 Boxster and Cayman models (including GTS 4.0, GT4, GT4 RS, and Spyder) equipped with standard steel brakes and without ceramic composite braking systems.

Engineered for high-performance heat management, the SHW Right Rear Cross-Drilled MB Brake Rotor provides the consistent stopping power and thermal stability required for both aggressive street driving and track applications. This rotor features a precision cross-drilled pattern to effectively vent brake gases and dissipate heat, preventing brake fade. Built as a direct replacement for factory Porsche components, it maintains the precise tolerances and balance needed for the 981 and 982 chassis platforms.

• Precision cross-drilled surface for superior heat dissipation and gas venting
• MB series construction for optimized thermal stability and weight
• Direct replacement for OE part number 98135240400
• Specifically for vehicles without ceramic brakes (PCCB)
• Position: Right Rear
• Manufacturer Part Number: PRR39824

Vehicle Fitment

Fits select 2009-2025 Porsche 911, Boxster, and Cayman models without ceramic brakes.

This SHW MB series brake rotor provides a direct-replacement solution for the right front position, engineered to maintain consistent braking performance under high thermal loads. The drilled and dimpled surface pattern efficiently clears brake dust and dissipates heat, preventing gas buildup between the pad and the rotor surface. Designed for vehicles equipped with standard iron brakes, this rotor ensures a precise fit and reliable pedal response for your Porsche.

• Position: Right Front
• Series: MB
• Surface Design: Drilled and Dimpled (Drill-Dimp)
• Compatible Brake Type: Vehicles without Ceramic Brakes only
• Manufacturer Part Number: PFR39972
• Reference OE Number: 99735140201

Fits select 2009-2025 Porsche 911, 718 Boxster, 718 Cayman, Boxster, and Cayman models without Ceramic Brakes (Cast Iron Brake systems only).

This SHW Performance Left Front MB Brake Rotor is engineered to provide superior heat dissipation and consistent friction for high-performance driving. Featuring a precision-drilled and dimpled surface, this rotor effectively vents gases and dust while improving bite in wet conditions. The MB designation indicates a high-performance construction designed to meet the rigorous thermal demands of Porsche braking systems, ensuring fade resistance and long-term durability on the street or the track.

• Position: Front Left
• Rotor Type: Drilled & Dimpled
• Brake System: For vehicles without Ceramic Brakes (PCCB)
• Replaces OE Part Number: 99735140101
• Manufacturer Part Number: PFL39971

Each rotor is manufactured to exact tolerances for a direct-fit installation, bolting directly to the factory hub without modification. This is an ideal solution for Porsche owners looking to restore original braking performance or upgrade from standard smooth rotors.

Fits select 2021-2025 BMW M2, M3, and M4 (Base, Competition, CS, and CSL).

This SHW lightweight right rear brake rotor is designed to maintain consistent stopping power under high-performance driving conditions. Featuring a cross-drilled friction ring, the rotor effectively dissipates heat and vents gases to reduce brake fade. The lightweight multi-material construction reduces unsprung mass at the wheel hub, facilitating more responsive suspension travel and improved handling dynamics.

• Position: Right Rear
• Rotor Type: Cross-Drilled Lightweight
• Manufacturer Part Number: BRR43854
• Replaces OE Part Number: 34208093730
• Direct-fit replacement for factory braking systems
• Optimized for thermal management and weight reduction

Fits select 2020-2025 BMW X5 and X6 (4.4L).

Improve your vehicle's braking performance and handling with this SHW Right Rear Cross-Drilled Lightweight Brake Rotor. Engineered as a high-performance alternative to standard components, this rotor utilizes a cross-drilled design to maximize heat dissipation and maintain a clean friction surface by venting gasses and debris. The lightweight construction reduces unsprung weight at the wheel hub, allowing for more responsive suspension travel and improved steering feel.

• Position: Right Rear
• Rotor Design: Cross-Drilled, Lightweight
• Manufacturer Part Number: BRR43508
• Interchange/OE Number: 34208074286
• Precision manufactured for high-thermal stability and consistent pedal feel
• Direct replacement for factory rotors on select BMW X-Series models

Fits 2018-2021 BMW M2 Base, Competition, and CS (3.0L).

Maintain factory-level braking performance and thermal management with this SHW Performance left rear brake rotor. Specifically engineered for the BMW M2 platform, this lightweight rotor features a cross-drilled design to effectively dissipate heat, gas, and debris during high-performance driving. As a direct replacement for the original equipment, it ensures precise fitment and restores the bite and consistency required for the M2's high-output 3.0L powertrain.

• Position: Rear Left
• Design: Cross-drilled for improved cooling and outgassing
• Construction: Lightweight ventilated design to reduce unsprung mass
• Manufacturer Part Number: BRL48253
• OE Reference: Replaces 34118072019

Fits 2012-2019 BMW M5, M6, and M6 Gran Coupe (4.4L).

This SHW Performance lightweight brake rotor is a precision-engineered replacement for the left rear position on select BMW M-series models. Utilizing a cross-drilled design, this rotor optimizes thermal management by increasing surface area and allowing gases to escape, which significantly reduces the risk of brake fade during high-performance driving. The lightweight construction follows OE specifications to minimize unsprung weight, ensuring better suspension response and handling dynamics.

• Position: Left Rear
• Type: Cross-Drilled Lightweight Rotor
• Braking Surface: Cross-Drilled & Vented
• Engine Fitment: 4.4L
• Manufacturer Part Number: BRL48171
• Reference OE Number: 34212284103

Fits select 2021-2025 BMW M2, M3, and M4 models (Base, Competition, CS, and CSL).

This SHW Performance lightweight brake rotor is a precision-engineered replacement for the factory left rear unit, designed to meet or exceed OE performance standards. The cross-drilled face provides superior heat dissipation and gas venting during heavy braking cycles, maintaining consistent pad bite and reducing thermal fade. By utilizing a lightweight construction, this rotor reduces unsprung weight and rotational mass, which improves suspension response and overall vehicle dynamics.

• Manufacturer Part Number: BRL43853
• OE Reference Number: 34208093729
• Position: Left Rear
• Design: Cross-Drilled Lightweight
• Fitment: Direct OE replacement for factory braking systems

Fits 2015-2019 BMW X5 M and X6 M (4.4L).

Maintain the high-performance braking standards of your BMW with this SHW Right Front Cross-Drilled Lightweight Brake Rotor. Engineered as a precision-fit replacement for the factory component, this rotor utilizes a cross-drilled design to maximize heat dissipation and prevent brake fade during demanding driving cycles.

The lightweight construction focuses on reducing unsprung mass, which directly improves suspension damping response and steering feedback. This rotor is manufactured to strict tolerances to ensure perfect balance and consistent friction performance, providing a reliable solution for restoring your vehicle's factory braking bite.

• Position: Right Front
• Rotor Style: Cross-Drilled
• Features: Lightweight multi-piece construction
• Replaces OE Part Number: 34112284902
• Manufacturer Part Number: BFR48502

Fits select 2015-2021 BMW M2, M3, and M4 (3.0L).

This SHW Performance lightweight brake rotor is a direct-replacement upgrade designed for the right front position of your BMW M-series vehicle. Utilizing a cross-drilled design, this rotor effectively dissipates heat and gasses generated during high-performance braking, ensuring consistent pedal feel and reduced brake fade. The lightweight construction minimizes unsprung weight to improve handling response and suspension performance without compromising structural integrity.

• Position: Right Front
• Rotor Style: Cross-Drilled
• Construction: Lightweight Performance Design
• Direct fit replacement for OE part number 34112284810
• Engineered for high-thermal stability and durability
• Manufacturer Part Number: BFR44810

Fits 2015-2018 BMW X5 M and 2015-2019 BMW X6 M (4.4L).

This SHW lightweight left front brake rotor is engineered as a direct-fit replacement for the factory component on BMW M-series SUVs. The cross-drilled rotor face provides superior heat dissipation and venting for gases and debris, maintaining consistent friction levels during high-performance driving. Its lightweight multi-material construction reduces unsprung weight at the wheel hub, improving both suspension response and handling dynamics.

• Position: Left Front
• Rotor Style: Cross-Drilled
• Design: Lightweight High-Performance Construction
• Manufacturer Part Number: BFL48501
• OEM Reference: 34112284901

Fits select 2012-2019 BMW M5, M6, and M6 Gran Coupe (4.4L).

This SHW lightweight cross-drilled brake rotor is a precision-engineered replacement for the factory front-left component. Designed to maintain the high-performance braking standards of the BMW M-series, the cross-drilled surface effectively vents gases, heat, and brake dust to ensure a consistent friction coefficient during aggressive use. The lightweight construction reduces unsprung mass at each corner, aiding suspension recovery and steering response.

• Direct replacement for the front left position
• Cross-drilled for superior heat dissipation and gas venting
• Lightweight design helps reduce unsprung weight
• Maintains factory braking geometry and tolerances
• Manufacturer Part Number: BFL48151
• Replaces OE Part Number: 34112284101

Fits select 2022-2025 Audi S3, Volkswagen Golf R, and Volkswagen GTI (2.0L).

This SHW front brake rotor is engineered to provide superior stopping power and thermal management for high-performance Audi and Volkswagen models. Featuring a cross-drilled surface, this rotor effectively dissipates heat and prevents brake fade during spirited driving or track use. The drilled holes allow for continuous venting of gas and debris, maintaining a clean contact patch between the pad and rotor for consistent bite.

Designed as a lightweight performance upgrade, this rotor reduces unsprung mass at the wheel hubs, improving suspension response and overall handling precision. It serves as a high-quality replacement for factory part number 5WA615301A, utilizing factory mounting points for a straightforward installation.

• Manufacturer Part Number: VFX43801
• OE Reference: 5WA615301A
• Design: Cross-drilled for optimal cooling and gas venting
• Construction: Lightweight design to reduce unsprung weight
• Position: Front
• Engine Fitment: 2.0L