Fits 2016-2021 BMW M2 Base, Competition, and CS models (3.0L) equipped with standard iron brakes.

This SHW Performance lightweight (LW) brake rotor is engineered to provide superior heat dissipation and reduced unsprung weight for the front right position of your BMW M2. Featuring a precision cross-drilled design, this rotor ensures consistent friction and improved venting during spirited driving or performance applications. As a direct-fit replacement for vehicles without the carbon ceramic brake option, it maintains factory tolerances while optimizing thermal management.

• Position: Front Right
• Design: Cross-Drilled
• Type: Lightweight (LW) Composite Design
• Manufacturer Part Number: BFR48252
• Interchange Part Number: 34118072018
• Fitment Note: For models without Ceramic Brakes

Maintain factory-level braking performance with this SHW Right Front Cross-Drilled Lightweight Brake Rotor. Fits 2012-2019 BMW M5, M6, and M6 Gran Coupe (4.4L). Engineered specifically for high-performance BMW M platforms, this rotor features a cross-drilled surface designed to effectively vent heat and gases, preventing brake fade during spirited or track driving. The lightweight construction reduces unsprung mass, optimizing suspension response and handling dynamics.

• Direct replacement for BMW OE part number 34112284102
• Position: Right Front
• Cross-drilled surface for superior heat dissipation and wet-weather bite
• Lightweight design to reduce rotational mass
• Manufacturer Part Number: BFR48161

Vehicle Fitment:

• 2013-2016 BMW M5 Base (4.4L)
• 2012-2018 BMW M6 Base (4.4L)
• 2014-2019 BMW M6 Gran Coupe Base (4.4L)

Fits 2006-2010 BMW M5 and M6 (5.0L).

The SHW Right Front Cross-Drilled Lightweight Brake Rotor (BFR48061) is a precision-engineered replacement for the E60 M5 and E63/E64 M6. Built to handle the thermal demands of the S85 V10 engine, this rotor features a pinned-floating, multi-material construction that reduces unsprung weight compared to traditional one-piece cast iron units. This design improves suspension articulation and steering response while maintaining structural integrity under high heat.

The cross-drilled friction surface provides a critical escape path for brake gases and water, ensuring consistent pad contact and reducing the risk of brake fade during performance driving. Each rotor is manufactured to exact tolerances for a direct-fit installation on the passenger side front axle.

• Location: Front Right
• Rotor Type: Cross-Drilled, Lightweight Floating Design
• MPN: BFR48061
• OE Reference: 34112282806
• High-carbon metallurgy for improved thermal conductivity and durability

Vehicle Fitment

Fits 2005-2008 BMW M3 and Z4 M (3.2L).

This SHW Right Front Cross-Drilled Lightweight Brake Rotor is an OE-specification replacement designed to restore the factory braking performance and heat management of your BMW M-series vehicle. The cross-drilled surface provides critical gas venting and debris clearance to maintain consistent pad bite, while the internal ventilation ensures efficient cooling during spirited driving or track use.

Built to exacting tolerances, the lightweight design of this rotor reduces unsprung mass at the wheel hub, contributing to sharper suspension response and improved handling characteristics. This component is a direct replacement for the original equipment and installs into the factory caliper and hub assembly without modification.

• Position: Front Right
• Design: Cross-Drilled, Lightweight, Ventilated
• OE Reference: 34112282446
• Manufacturer Part Number: BFR44461
• Engine Fitment: 3.2L I6
• Optimized for thermal stability and high-performance friction application

Fits select 2008-2013 BMW 1 Series M and M3 (4.0L).

Maintain the precision braking performance of your M-chassis vehicle with the SHW BFR42852 Right Front Cross-Drilled Lightweight Brake Rotor. This high-performance replacement is engineered to match the technical requirements of the original equipment, utilizing a cross-drilled friction surface to facilitate rapid heat dissipation and gas venting during aggressive braking maneuvers.

• Lightweight Construction: Engineered to reduce unsprung weight and rotational mass, improving suspension articulation and steering response.
• Thermal Management: The cross-drilled pattern increases surface area for cooling and helps clear brake dust and water for consistent pad contact.
• Direct OE Replacement: Designed specifically for the front right (passenger side) position to ensure perfect fitment with factory calipers and hubs.
• Manufacturer Part Number: BFR42852

This rotor is an essential component for drivers looking to restore the factory-spec stopping power and heat resilience of their BMW braking system.

Fits 2001-2006 BMW M3 (3.2L).

This SHW Performance lightweight brake rotor is a direct replacement for the front right position on the E46 M3. Engineered to European-market specifications, this rotor features a cross-drilled friction surface to maximize heat dissipation and maintain consistent bite during high-performance driving or track sessions.

The lightweight construction focuses on reducing unsprung weight, which directly improves suspension kinematics and steering feedback. SHW utilizes high-carbon metallurgy to ensure thermal stability and long-term durability, meeting the strict tolerances required for BMW M models.

• Position: Front Right
• Design: Drilled & Lightweight (European Spec)
• Material: High-carbon iron friction surface
• Cross-reference OE Part Number: 34112282802
• Manufacturer Part Number: BFR42842

Fits select 2018-2025 BMW 530i, 540i, M5, M8, and M8 Gran Coupe (4.4L).

Restore the braking performance and thermal management of your BMW with this premium SHW Performance front right brake rotor. Designed as a direct replacement for the factory component, this lightweight rotor features a cross-drilled friction surface that maximizes heat dissipation and maintains a clean contact patch between the pad and rotor under heavy braking. The lightweight construction reduces unsprung weight to improve handling response and rotational inertia without compromising structural integrity.

• Position: Front Right
• Manufacturer Part Number: BFR42502
• OE Reference Number: 34117991102
• Design: Cross-drilled for superior cooling and gas venting
• Lightweight architecture reduces unsprung mass for improved dynamics
• Precision machined for strict runout and thickness variation tolerances

Fits select 2016-2021 BMW M2, M2 Competition, and M2 CS models (3.0L) equipped with standard iron brakes. This SHW Front Left Drilled Lightweight (LW) Brake Rotor is engineered to provide superior thermal management and weight reduction for high-performance applications. Designed specifically for vehicles without ceramic brakes, it serves as a direct replacement for the factory unit, ensuring proper fitment and integration with the OE braking system.

The cross-drilled surface design optimizes initial pad bite and provides a clear path for heat and gases to escape during aggressive deceleration, significantly reducing the risk of brake fade. The lightweight construction minimizes unsprung mass, contributing to more responsive handling and improved suspension dynamics.

• Position: Front Left (Driver Side)
• Design: Cross-Drilled Lightweight Two-Piece
• Brake System: For models without Ceramic Brakes
• Engine Compatibility: 3.0L I6
• Manufacturer Part Number: BFL48251
• Replaces OE Number: 34118072017

Fits 2006-2010 BMW M5 and M6 Base models (5.0L).

This SHW performance brake rotor is engineered as a precision direct-fit replacement for the front left position. Featuring a cross-drilled friction surface, this rotor is designed to optimize initial bite while effectively venting gases and debris away from the brake pad to prevent fading during spirited driving. The lightweight construction helps reduce unsprung mass, improving suspension response and overall handling dynamics on the E60 and E63/E64 chassis.

• Position: Front Left
• Type: Cross-Drilled Lightweight Performance Rotor
• Engineered for superior heat dissipation and cooling
• Direct replacement for factory part number 34112282805
• Maintains factory braking balance and pedal feel
• Manufacturer Part Number: BFL48051

Fits 2015-2021 BMW M2, M3, and M4 models including Base, Competition, CS, and GTS trims (3.0L).

Maintain factory-level braking performance and thermal efficiency with this SHW lightweight brake rotor. Specifically engineered for the left front position, this rotor features a cross-drilled design to effectively vent gases, heat, and brake dust, ensuring a consistent friction coefficient during aggressive driving. The lightweight construction reduces unsprung mass, improving suspension response and overall handling dynamics.

As a direct replacement for the factory unit, this rotor installs without modification to the original braking system, providing the exact tolerances and cooling characteristics required for high-performance BMW M-series applications.

• Position: Left Front
• Rotor Type: Cross-Drilled Lightweight Performance
• Engine Compatibility: 3.0L Inline-6
• Manufacturer Part Number: BFL44809
• OE Reference Number: 34112284809

Fits 2005-2008 BMW M3 and Z4 M models (3.2L).

Maintain factory-level braking performance and heat management with this SHW Left Front Cross-Drilled Lightweight Brake Rotor. Engineered as a direct replacement for the OE component, this rotor features a cross-drilled surface designed to increase initial bite and effectively vent gases and heat during aggressive braking. The lightweight construction helps reduce unsprung mass, which improves suspension articulation and steering response.

• Position: Left Front
• Rotor Style: Cross-Drilled for heat dissipation and outgassing
• Construction: Lightweight high-performance design
• Direct replacement for factory braking systems
• Manufacturer Part Number: BFL44451

Fits 2008-2013 BMW 1 Series M and M3 (4.0L).

This SHW lightweight front left brake rotor is a direct-fit performance replacement for factory equipment. Designed for the high-thermal demands of M-series vehicles, the cross-drilled surface optimizes heat dissipation and vents brake gases to ensure consistent pedal feel and stopping performance. The lightweight construction reduces unsprung weight, enhancing suspension response and overall handling dynamics.

• Position: Front Left
• Rotor Type: Cross-drilled for cooling and debris removal
• Performance: Lightweight design reduces rotational mass and unsprung weight
• Compatibility: Replaces factory front left rotor
• Manufacturer Part Number: BFL42851

Fits 2001-2006 BMW M3 Base (3.2L).

This SHW lightweight brake rotor is a high-performance replacement engineered for the left front position of the E46 M3. Specifically designed for European-model specifications, it features a cross-drilled surface to maximize heat dissipation and effectively vent gases, ensuring consistent stopping power during aggressive driving. The lightweight construction reduces unsprung mass, which directly improves suspension response and overall handling dynamics.

• Position: Left Front
• Design: Cross-drilled for superior cooling and gas evacuation
• Construction: Lightweight floating-style design for reduced unsprung weight
• Fitment: Specific to European model specifications
• Engine Compatibility: S54 3.2L Inline-6
• Manufacturer Part Number: BFL42841
• Interchange Part Number: 34112282801

Fits select 2018-2025 BMW M5, M8, M8 Gran Coupe, 530i, and 540i (4.4L).

The SHW BFL42501 is a high-performance lightweight front left brake rotor engineered to maintain consistent stopping power under extreme thermal loads. Featuring a precision cross-drilled pattern, this rotor facilitates rapid heat dissipation and prevents gas buildup between the pad and rotor surface, significantly reducing the risk of brake fade during spirited driving. The lightweight design reduces unsprung mass at the wheel hub, which improves suspension response and steering precision.

• Position: Front Left
• Rotor Style: Cross-Drilled
• Type: Lightweight Performance Rotor
• Manufacturer Part Number: BFL42501
• OE Reference Number: 34117991101

Fits 2018-2025 Audi RS5 and RS5 Sportback (2.9L) models not equipped with the optional carbon ceramic brake package.

This SHW Lightweight (LW) rear brake rotor is engineered to provide high-performance stopping power while significantly improving thermal management. Featuring a precision drilled and dimpled friction surface, this rotor is designed to evacuate gasses and debris more efficiently than standard solid rotors. The advanced design offers up to 50% better cooling than traditional alternatives, directly combating brake fade during spirited driving or track use.

• Direct replacement for OE part number 8W0615601G
• Drilled and dimpled surface for superior heat dissipation and degassing
• Lightweight construction reduces unsprung weight for improved handling and suspension response
• Optimized cooling capacity to prevent thermal stress and brake fade
• Manufacturer Part Number: ARX49211

Fits 2013-2015 Audi RS5 Base and Cabriolet (4.2L).

This SHW Performance rear brake rotor is engineered to provide high-performance thermal management and weight reduction for the Audi RS5 platform. Featuring the signature lightweight wavy outer profile, this rotor reduces unsprung mass at the wheel hub to improve suspension response and handling. The friction surface is both drilled and dimpled to facilitate outgassing and maintain a clean contact patch between the pad and rotor during high-heat operation.

• Manufacturer Part Number: ARX48221
• OE Reference Number: 8T0615601A
• Position: Rear
• Design: Lightweight Wavy Profile
• Surface Finish: Drilled and Dimpled
• Engine Compatibility: 4.2L V8

Fits 2014-2018 Audi RS7 Base and Performance models (4.0L).

The SHW Performance Rear Lightweight Wavy Brake Rotor is engineered to provide superior thermal management and reduced unsprung weight for the Audi RS7. Featuring a distinct wavy outer profile, this rotor is designed to dissipate heat more efficiently than standard discs while reducing rotating mass for improved handling and suspension response. The cross-drilled surface ensures consistent friction by venting brake gases and clearing debris, providing a reliable bite during spirited driving.

This rotor is a direct-replacement performance upgrade for the factory rear brakes, utilizing advanced metallurgy to resist warping under high-stress conditions. It maintains full compatibility with the factory braking system while offering the aggressive aesthetics and cooling advantages found on high-performance RS models.

• Manufacturer Part Number: ARX47418
• Replaces OE Part Number: 4G8615601E
• Lightweight wavy design reduces unsprung and rotating mass
• Cross-drilled pattern for enhanced cooling and outgassing
• Precision-machined for a direct-fit install on the rear axle
• Optimized for the high-output 4.0L twin-turbocharged engine

Fits the 2003 Audi RS6 Base (4.2L).

This SHW lightweight brake rotor is engineered to provide superior heat dissipation and thermal stability for the high-performance 2003 Audi RS6. Featuring a cross-drilled pattern that increases effective surface area, this rotor offers up to 50% better cooling compared to standard designs. The enhanced airflow significantly reduces the risk of brake fade during heavy use, ensuring consistent stopping power when it matters most.

As a direct replacement for the factory right rear unit, this lightweight rotor reduces unsprung mass to improve suspension response. It is precision-manufactured to match the exact tolerances required for the RS6 braking system.

• Position: Right Rear
• Design: Cross-drilled, Lightweight
• Manufacturer Part Number: ARR46414
• OEM Cross-Reference: 4B3615602A
• Fitment: Specific to 2003 Audi RS6 (4.2L)

Fits 2003 Audi RS6 Base (4.2L).

Maintain the high-performance braking standards of your C5 chassis with the SHW Performance left rear lightweight brake rotor. This cross-drilled rotor is engineered to provide superior heat dissipation and reduced unsprung weight compared to standard solid discs, ensuring consistent pedal feel and stopping power during demanding driving conditions.

This rotor is a direct replacement for the original equipment, designed to bolt to factory mounting points while meeting exact tolerances for runout and thickness. The cross-drilled pattern allows for efficient outgassing and cooling, which helps prevent brake fade and maintains a clean pad contact surface.

• Position: Left Rear
• Rotor Type: Cross-Drilled, Lightweight Construction
• Manufacturer Part Number: ARL46413
• OEM Interchange: 4B3615601C
• Direct-fit replacement for the 2003 Audi RS6

Fits select 2018-2025 Audi A5 Sportback, S5 Sportback, RS5, and RS5 Sportback (2.9L).

This SHW lightweight front brake rotor is engineered for high-performance Audi applications where thermal management and unsprung weight are critical. Featuring a cross-drilled design, this rotor provides up to 50% better cooling compared to standard configurations, significantly reducing the risk of brake fade during spirited driving or track sessions. The lightweight construction improves handling response and suspension articulation by reducing rotating mass.

• Direct replacement for OE part number 4M0615301AM
• Cross-drilled surface for superior heat dissipation and gas venting
• Lightweight design reduces unsprung weight for improved performance
• Optimized cooling vanes to prevent thermal stress and warping
• Manufacturer Part Number: AFX49201

Fits select 2013-2023 Audi R8 and RS5 (5.2L). Note: this component is designed for models equipped with steel rotors and excludes vehicles with Carbon Ceramic brake systems.

Engineered to meet the high-thermal demands of the Audi R8 and RS5, this SHW lightweight front wavy rotor offers a direct replacement for worn factory discs. The signature wavy outer profile isn't just for aesthetics; it significantly reduces unsprung mass at the wheel hub, improving suspension response and handling. A combination of cross-drilling and dimpling ensures consistent outgassing of brake pads and superior heat dissipation during spirited driving or track sessions.

• Brand: SHW Performance
• MPN: AFX48201
• OE Reference: 4S0615301B
• Position: Front
• Design: Lightweight Wavy Profile
• Surface Finish: Drilled and Dimpled for thermal management
• Compatibility: For vehicles without Carbon Ceramic brakes

Fits select 2014-2018 Audi A7 Quattro, S7, and RS7 models (4.0L).

Optimize your vehicle's braking performance and reduce unsprung mass with the SHW lightweight wavy front brake rotor. Designed as a direct replacement for the factory component, this rotor features a distinctive wavy outer profile that sheds weight without compromising structural integrity. The drilled and dimpled surface treatment ensures consistent pad bite by effectively venting brake gases and managing heat during high-performance driving scenarios.

• Precision Engineering: Lightweight wavy design reduces rotational inertia for improved handling response.
• Advanced Cooling: Drilled and dimpled surface maximizes thermal dissipation and prevents glazing.
• Direct Fitment: Engineered to meet or exceed original equipment standards for a seamless installation.
• Manufacturer Part Number: AFX47415
• OE Reference: 4G0615301AH
• Position: Front

Fits 2012-2013 Audi TT RS Quattro Base (2.5L).

This SHW lightweight front brake rotor is engineered to provide superior stopping power and heat management for high-performance applications. Featuring a drilled and dimpled surface design, this rotor effectively dissipates heat and vents out-gassing to maintain a consistent friction surface during aggressive driving. The lightweight construction reduces unsprung weight, improving suspension response and overall handling dynamics.

• Manufacturer Part Number: AFX41521
• OE Reference: 8J0615301K
• Design: Drilled and dimpled for maximum cooling and debris evacuation
• Position: Front
• Construction: Lightweight performance-focused design
• Fitment: Direct replacement for factory units on select Audi TT RS models

Fits 2017-2020 Audi RS3 Base (2.5L).

Restore and enhance your stopping power with this SHW Performance lightweight front brake rotor. Designed as a direct-replacement performance upgrade, this rotor utilizes a drilled and dimpled surface pattern to provide superior heat dissipation and gas venting during aggressive braking. The lightweight construction reduces unsprung weight, improving suspension response and overall handling dynamics.

• Manufacturer Part Number: AFX41156
• Replaces OE Part Number: 8V0615301R
• Up to 50% better cooling efficiency to effectively prevent brake fade
• Drilled and dimpled surface provides consistent bite and clears brake dust/gases
• Advanced lightweight design for reduced rotational mass
• Position: Front

Fits 2005-2011 Lotus Elise (Base, R, SC) and 2006-2011 Lotus Exige (Base, S, S 240).

Upgrade your braking performance with the DFC Hi-Carbon Alloy Geomet Coated Drilled Brake Rotor. Engineered specifically for the lightweight, high-performance requirements of the Lotus Elise and Exige, these rotors are cast from premium G3000/G11H18 iron for superior thermal stability and durability. The cross-drilled pattern facilitates outgassing and heat dissipation during spirited driving, while the full Geomet coating ensures long-lasting corrosion protection on all non-friction surfaces.

• High-Carbon Casting: Uses G3000/G11H18 metallurgy for improved strength and reduced thermal fatigue.
• Corrosion Protection: Geomet coating provides a high-performance barrier against rust and environmental wear.
• Precision Balanced: 100% mill-balanced to ensure zero vibration and smooth operation at all speeds.
• Optimized Finish: Fine-turned 16 RMS finish improves initial rotor and pad break-in for consistent bite.
• Cooling Efficiency: Retains Original Equipment (OE) vane configuration for maximum heat dissipation.
• Tight Tolerances: Disc Thickness Variation (DTV) maximum of 010 MM and Lateral Runout maximum of 050 MM.
• Manufacturer Part Number: 920-84000

Fits select 2014-2024 Maserati Ghibli and Quattroporte models. This DFC rear brake rotor is engineered to provide superior heat management and consistent braking performance for high-performance Italian luxury sedans.

Constructed from premium G3000/G11H18 hi-carbon alloy iron castings, this rotor is designed for maximum strength and thermal stability. The cross-drilled pattern enhances cooling and helps clear gas and debris under heavy braking. To ensure long-term durability, each rotor is Geomet coated for advanced corrosion protection, maintaining both performance and a clean aesthetic behind your wheels. These rotors are precision mill-balanced to eliminate vibration and features a 16 RMS fine-turned finish for optimal pad break-in.

• Manufacturer Part Number: 920-79013
• Hi-carbon alloy G3000/G11H18 iron casting for superior durability
• Geomet coating for high-performance corrosion resistance
• Original Equipment (OE) vane configuration for maximum heat dissipation
• 100% precision mill-balanced for zero-vibration performance
• Fine turned finish (16 RMS) for improved rotor-to-pad bedding
• Maximum Disc Thickness Variation (DTV): 0.010 mm
• Maximum Lateral Runout: 0.050 mm

Fits 2014-2022 Maserati Ghibli and Quattroporte models, including Ghibli Base, S, S Q4, and Quattroporte GTS and Trofeo.

DFC Rear Drilled Hi-Carbon Alloy brake rotors are engineered for superior thermal stability and durability using premium G3000/G11H18 iron castings. These rotors are designed to exceed standard performance requirements, featuring a Geomet coating that provides high-performance corrosion protection across the entire rotor surface. Each unit is 100% precision mill-balanced to eliminate vibration and ensure smooth stopping performance. The fine-turned 16 RMS finish facilitates an improved initial break-in period between the rotor and brake pads.

• Premium G3000/G11H18 iron castings for maximum strength and stability
• Original Equipment (OE) vane configuration for optimal heat dissipation
• 100% precision mill-balanced for zero vibration at any speed
• Fine-turned finish (16 RMS) for improved initial pad break-in
• Geomet coating for high-performance corrosion protection
• Maximum Disc Thickness Variation (DTV): 0.010 mm
• Maximum Lateral Runout: 0.050 mm
• Manufacturer Part Number: 920-79008

Fits select 2014-2024 Maserati Ghibli and Quattroporte models (S, S Q4, Modena, Trofeo, GT, and Base).

This DFC high-performance front brake rotor is engineered for enthusiasts demanding superior thermal stability and corrosion resistance. Utilizing premium G3000/G11H18 high-carbon iron castings, these rotors offer enhanced strength and durability compared to standard iron, making them ideal for the high-performance braking requirements of Maserati sport sedans.

The rotor features a drilled design to effectively dissipate heat and gases, maintaining a clean pad surface and consistent bite. To ensure a long service life and professional appearance, every rotor is Geomet coated to provide a high-performance barrier against corrosion. Each unit is 100% precision mill-balanced to eliminate vibration and features a fine-turned 16 RMS finish for optimized pad break-in.

• Manufacturer Part Number: 920-79004
• Material: Premium G3000/G11H18 High-Carbon Iron Castings
• Finish: Geomet Coated for superior corrosion protection
• Surface Finish: Fine Turned (16 RMS)
• Balancing: 100% Precision Mill-Balanced
• OE Vane Configuration: Optimizes airflow and heat dissipation
• Lateral Runout: 0.050mm Maximum
• Disc Thickness Variation (DTV): 0.010mm Maximum

Fits 2008-2014 Lexus IS F Base models. Designed as a direct-fit performance replacement, this DFC Front Drilled Hi-Carbon Alloy Brake Rotor provides the thermal stability and cooling required for high-performance driving.

Constructed from premium G3000/G11H18 high-carbon iron castings, these rotors offer superior strength and durability compared to standard iron. The cross-drilled design increases surface area for heat dissipation and helps vent gases and debris from the pad interface. Each rotor features an Original Equipment (OE) vane configuration to maintain factory cooling efficiency. To ensure immediate performance and a quiet ride, these rotors are 100% precision mill-balanced and finished with a 16 RMS fine-turned surface for optimal pad bedding.

• Material: High-carbon G3000/G11H18 alloy for enhanced heat cycling stability
• Finish: Geomet® coating for long-lasting corrosion protection on non-friction surfaces
• Precision: Mill-balanced to eliminate vibration and ensure smooth stopping
• Surface Finish: Fine-turned 16 RMS finish for improved initial rotor and pad break-in
• Tolerance: Maximum Disc Thickness Variation (DTV) of 0.010 mm and Lateral Runout of 0.050 mm
• MPN: 920-75026

Fits select 2016-2023 Mercedes-Benz C, CLS, E, and GLC-Class models (C43 AMG, C450 AMG, CLS450, E300, E350, E400, E43 AMG, E450, E53 AMG, GLC300, GLC350e, and GLC43 AMG).

Dynamic Friction Company (DFC) high-performance rotors are engineered for drivers seeking improved heat management and corrosion resistance. This front rotor is cast from premium G3000/G11H18 metallurgy, providing a high-carbon alloy structure that ensures maximum thermal stability and durability under heavy braking conditions. The cross-drilled design effectively dissipates heat and gasses, maintaining a consistent friction surface between the pad and rotor.

• Precision Engineering: 100% precision mill-balanced to ensure smooth operation and zero vibration at highway speeds.
• Advanced Coating: Geomet coating provides high-performance protection against corrosion on all non-friction surfaces.
• Optimal Finish: A fine-turned 16 RMS finish promotes faster pad bed-in and improved initial bite.
• OE-Spec Cooling: Utilizes the Original Equipment vane configuration for maximum airflow and cooling efficiency.
• Strict Tolerances: Maximum Disc Thickness Variation (DTV) of 0.010 mm and Lateral Runout of 0.050 mm.
• Part Number: 920-63152