Fits select 2014-2021 Mercedes-Benz S450, S550, S550e, S560, and Maybach S550 (4Matic and Base trims). This high-performance rear rotor is engineered to provide superior heat management and corrosion resistance for heavy luxury sedans.

• Cast from premium G3000/G11H18 high-carbon iron for enhanced thermal stability and long-term durability.
• Drilled design facilitates rapid heat dissipation and vents gases to maintain consistent friction levels.
• Geomet coating offers high-performance corrosion protection on all non-friction surfaces.
• Original Equipment (OE) vane configuration ensures proper airflow and maximum cooling efficiency.
• 100% precision mill-balanced to eliminate vibration and provide smooth stopping at any speed.
• Fine-turned 16 RMS finish improves initial pad-to-rotor break-in.

Specifications:

• Manufacturer Part Number: 920-63113
• Position: Rear
• Material: High-Carbon Alloy / G3000/G11H18 Iron
• Maximum Disc Thickness Variation (DTV): 0.010 mm
• Maximum Lateral Runout: 0.050 mm

Fits select 2014-2021 Mercedes-Benz S450, S550, S550e, S560, and Maybach S550/S560.

This DFC high-carbon alloy front brake rotor is engineered to provide superior thermal stability and durability for high-performance luxury sedans. Utilizing premium G3000/G11H18 iron castings, the high-carbon content enhances heat transfer and resistance to thermal cracking. The cross-drilled design effectively vents heat and brake dust, while the Geomet coating provides industry-leading corrosion protection on the hats and internal vanes. Each rotor is 100% precision mill-balanced to ensure smooth, vibration-free operation at any speed.

• Premium G3000/G11H18 high-carbon iron castings for increased strength and stability.
• Cross-drilled surface for maximum heat dissipation and gas venting.
• Geomet coating protects against rust and corrosion on non-friction surfaces.
• Original Equipment (OE) vane configuration ensures proper airflow and cooling performance.
• Fine-turned 16 RMS finish for improved initial pad break-in.
• Tight manufacturing tolerances: 0.050mm maximum lateral runout and 0.010mm maximum DTV.
• Manufacturer Part Number: 920-63112

Fits 2017-2026 Honda Civic Type R.

The DFC Drilled Hi-Carbon Alloy Geomet Coated Front Brake Rotor (920-59065) is designed for high-performance driving where heat management and corrosion resistance are paramount. Cast from premium G3000/G11H18 metallurgy, these rotors provide the structural stability and strength required for the Type R's aggressive braking system. The cross-drilled design efficiently vents gases and dissipates heat, while the Geomet coating ensures a clean look by resisting rust on the hub and vanes.

• High-Carbon Alloy: G3000/G11H18 iron castings provide superior thermal stability and durability under high-stress conditions.
• Advanced Cooling: Engineered with an Original Equipment (OE) vane configuration to ensure maximum heat dissipation.
• Precision Balancing: 100% mill-balanced to eliminate vibration and ensure smooth stopping at any speed.
• Optimal Surface Finish: Fine-turned 16 RMS finish promotes faster pad break-in and consistent friction levels.
• Corrosion Resistance: Geomet coating provides high-performance protection against the elements and road salts.
• Strict Tolerances: Disc Thickness Variation (DTV) is held to a 0.010mm maximum, with Lateral Runout limited to 0.050mm for a firm pedal feel.

Fits select 2018-2025 Subaru WRX and WRX STI models (TR, TS, Base, Limited, S209, and Type RA).

The DFC Rear Drilled Hi-Carbon Alloy Rotor (920-13042) is engineered for drivers demanding superior thermal stability and corrosion resistance. Utilizing G3000/G11H18 high-carbon iron castings, these rotors provide enhanced structural integrity to withstand high heat cycles without warping. The cross-drilled surface optimizes outgassing and cooling, while the Geomet coating ensures the entire rotor remains protected against rust and environmental wear.

• Premium G3000/G11H18 high-carbon iron metallurgy for maximum strength and stability
• Cross-drilled design improves heat dissipation and maintains pad performance
• Full Geomet coating provides high-performance protection against corrosion
• OE-matched vane configuration ensures proper cooling airflow
• 100% precision mill-balanced to ensure vibration-free operation at any speed
• Fine-turned 16 RMS finish facilitates faster pad break-in and smoother stopping
• Manufactured to strict tolerances: 0.010mm maximum DTV and 0.050mm maximum lateral runout

Fits 2018-2025 Subaru WRX and WRX STI models, including TR, TS, Base, Limited, S209, and Type RA.

Experience superior braking performance and heat management with the DFC Hi-Carbon Alloy series front rotor. Specifically engineered for high-performance Subaru braking systems, these rotors are cast from premium G3000/G11H18 high-carbon iron to ensure maximum thermal stability and structural integrity under heavy use. The cross-drilled design effectively dissipates heat and gases, reducing brake fade during spirited driving.

Each rotor features a Geomet coating for exceptional corrosion protection on all non-friction surfaces, maintaining a clean look behind your wheels. The 16 RMS fine-turned finish ensures a smooth pad break-in period, while 100% precision mill-balancing eliminates vibration at any speed.

• Manufacturer Part Number: 920-13041
• Material: High-carbon G3000/G11H18 iron castings for durability
• Finish: Geomet coated for high-performance corrosion resistance
• Cooling: Original Equipment (OE) vane configuration for maximum heat dissipation
• Machining: 16 RMS fine-turned finish for improved rotor and pad break-in
• Tolerances: Max DTV of 0.010mm and max lateral runout of 0.050mm
• Balancing: 100% precision mill-balanced for vibration-free operation

Fits select 2014-2022 Maserati Ghibli and Quattroporte models (V6-3.0L / V8-3.8L). This DFC rear drilled brake rotor is engineered for precision stopping power and enhanced heat management on performance luxury sedans.

Constructed from premium G3000/G11H18 iron castings, this rotor provides the structural integrity and durability required for heavy braking applications. The cross-drilled design allows heat and gases to escape quickly, reducing brake fade and maintaining consistent pedal feel. Each unit is 100% precision mill-balanced to ensure smooth operation and zero vibration at any speed.

• Material: Premium G3000/G11H18 iron castings for maximum strength
• Configuration: OE vane design for optimized airflow and heat dissipation
• Finish: Non-directional surface finish promotes faster pad break-in
• Balance: CNC-machined and mill-balanced for vibration-free performance
• Installation: Direct replacement for factory rotors; no modifications required
• Part Number: 620-79008

Vehicle Fitment:

Fits select 2020-2025 Mercedes-Benz CLA35, CLA45, GLA35, GLA45, and GLB35 AMG 4Matic models.

This DFC Front Drilled Brake Rotor is engineered to provide superior heat management and consistent stopping power for high-performance Mercedes-Benz AMG applications. Cast from premium G3000 and G11H18 iron, these rotors offer the structural integrity and thermal stability required for the intense heat cycles of performance driving. The cross-drilled pattern ensures effective outgassing and cooling, maintaining a clean pad surface and reducing the risk of brake fade.

• Premium G3000/G11H18 iron castings for maximum strength and durability
• Original Equipment (OE) vane configuration ensures proper heat dissipation and thermal airflow
• 100% precision mill-balanced to eliminate vibration at all speeds
• CNC-machined to tight tolerances for exact form, fit, and function
• Non-directional finish promotes faster break-in and smoother stops
• Direct replacement for the factory rotor; ready to install with no modifications
• Manufacturer Part Number: 620-63188

Fits select 2014-2021 Mercedes-Benz S450, S550, S550e, S560, and Maybach S550/S560 models. This DFC front drilled brake rotor is engineered to provide superior heat management and consistent stopping power for high-performance luxury sedans.

Constructed from premium G3000/G11H18 iron castings, these rotors are CNC-machined to tight tolerances for precise fitment and long-term structural stability. The drilled configuration allows for rapid heat and gas dissipation, while the 100% precision mill-balancing eliminates vibration at highway speeds. A non-directional finish is applied to ensure a faster break-in period and immediate pad bedding.

• Manufactured with G3000/G11H18 iron for enhanced durability and strength.
• Original Equipment (OE) vane configuration for optimal cooling efficiency.
• Precision mill-balanced for zero vibration and smooth operation.
• Drilled design facilitates better thermal management.
• Non-directional surface finish promotes faster break-in.
• Manufacturer Part Number: 620-63112

Fits select 2009-2025 Porsche 718 Boxster, 718 Cayman, 911, Boxster, and Cayman models.

This DFC Drilled Brake Rotor (620-02052D) is engineered to provide superior heat management and consistent stopping power for your Porsche. Specifically designed for the right front position, this rotor is cast from premium G3000/G11H18 iron for maximum structural integrity and resistance to thermal cracking. The cross-drilled pattern increases surface area for cooling and allows gases to escape, reducing brake fade during spirited driving.

• Precision Machined: 100% mill-balanced to eliminate vibration and ensure smooth engagement at any speed.
• OEM Geometry: Features an original equipment (OE) vane configuration to maintain factory-spec airflow and heat dissipation.
• Enhanced Surface: CNC-machined with a non-directional finish to facilitate a faster break-in period and improve pad-to-rotor contact.
• Durability: High-carbon iron metallurgy (G3000/G11H18) provides excellent stability and long-lasting performance.
• Ready to Install: Precision-engineered to match the form, fit, and function of factory rotors for a direct replacement without modifications.

Fits select 2009-2025 Porsche 911, Boxster, Cayman, 718 Boxster, and 718 Cayman.

This DFC (Dynamic Friction Company) left front drilled brake rotor is engineered to provide superior heat dissipation and consistent stopping power for performance-oriented Porsche models. Cast from premium G3000/G11H18 iron, this rotor (MPN 620-02051D) is CNC-machined to tight tolerances, ensuring a direct fit that matches the form, fit, and function of original equipment.

• High-Carbon Metallurgy: Cast with premium G3000/G11H18 iron for enhanced strength, stability, and resistance to thermal cracking.
• Drilled for Performance: The drilled surface pattern improves cooling and gas venting, while the OE vane configuration ensures maximum heat dissipation.
• Precision Mill-Balanced: 100% mill-balanced to eliminate vibration and provide smooth stopping at any speed.
• Non-Directional Finish: Features a CNC-machined non-directional finish to facilitate faster pad break-in and consistent friction.
• Direct Installation: Engineered to factory specifications for a bolt-on installation with no modifications required.

Vehicle Compatibility

• 2009-2016 Porsche 911 (Carrera, Carrera 4, Targa 4)
• 2013-2016 Porsche Boxster (S, GTS)
• 2014-2016 Porsche Cayman (S, GTS)
• 2017-2025 Porsche 718 Boxster (Base, T, Style Edition)
• 2017-2025 Porsche 718 Cayman (Base, T, Style Edition)

Fits select 2012-2021 BMW 2 Series, 3 Series, and 4 Series models, including 228i, 230i, 320i, 328d, 328i, 330i, 428i, and 430i (including xDrive and Gran Coupe variants).

The Brembo KTX4100 Prime front disc brake kit is engineered to provide OE-equivalent stopping power, comfort, and reliability for BMW sport sedans and coupes. This comprehensive kit features Prime low-Met brake pads and high-carbon cast iron rotors, designed to match the precise tolerances and performance characteristics of your vehicle's factory braking system.

• High-Carbon Rotors: Constructed from specialized cast iron to increase the damping coefficient, significantly reducing noise and vibration while improving heat conduction for faster cooling.
• Prime Low-Met Pads: Engineered for performance and comfort, these pads utilize patented solutions to meet or exceed original equipment standards.
• Complete Hardware: Discs are supplied with all necessary fixing hardware to ensure a straightforward and secure installation.
• Thermal Stability: Advanced metallurgy offers superior resistance to thermo-mechanical stress during spirited driving.
• Manufacturer Part Number: KTX4100

Fits select 2006-2021 Volkswagen Golf, GTI, R32, Passat, and SportWagen models.

The Brembo KTX4089 Rear Disc Brake Kit is engineered to provide OE-equivalent stopping power and thermal management. This complete kit features high-carbon cast iron rotors and Prime low-metallic pads, designed to meet the strict tolerances and performance requirements of your vehicle's braking system.

• High-Carbon Rotors: Manufactured with a high-carbon alloy to increase the damping coefficient, significantly reducing brake noise and vibration while enhancing heat conduction for faster cooling times.
• Prime Low-Met Pads: Developed with a specific focus on performance and comfort, these pads include all necessary accessories to match the quality and control of original equipment components.
• Complete Hardware: This kit is supplied with all required fixing hardware to ensure a simpler, safer, and more precise installation process.
• Durable Construction: Uses the same high-standard materials as the original manufacturer, ensuring resistance to thermo-mechanical stress and consistent braking behavior in all conditions.

Manufacturer Part Number: KTX4089

Fits 2008-2015 Audi TT Quattro, TT RS Quattro, and TTS Quattro models.

The Brembo OE Series Rear Disc Brake Kit (KTX4088) is a complete braking solution designed to restore factory-level performance and thermal efficiency. This kit pairs Brembo's Prime low-metallic brake pads with high-carbon cast iron rotors, providing a direct-replacement fit that addresses common issues like brake fade, vibration, and excessive noise. By utilizing original equipment manufacturing standards, this kit ensures your vehicle maintains precise stopping power and driver comfort in all road conditions.

• High-Carbon Cast Iron: Rotors feature a high damping coefficient to reduce noise and vibration while improving heat conduction for faster cooling.
• Pillar Venting Technology (PVT): Patented venting design enhances cooling capacity and increases resistance to thermal cracking by more than 40% compared to standard venting.
• Prime Low-Met Pads: Engineered for OE-equivalent performance and comfort with low-metallic friction materials.
• Complete Hardware: Includes all necessary fixing hardware to ensure a secure and efficient installation process.
• MPN: KTX4088
• Placement: Rear Axle

Fits select 2014-2024 Audi A3, S3, RS3, Q3 and Volkswagen Golf, GTI, Jetta, Arteon, and Tiguan. This Brembo Front Disc Brake Kit (KTX4080) is a comprehensive solution for restoring OE-level stopping power and thermal management to your vehicle's front braking system.

This kit features Brembo Prime low-Met brake pads, engineered to provide a damping coefficient that significantly reduces vibration and noise. The included brake discs are cast from high-carbon iron, which improves heat conduction and allows for faster cooling after heavy braking cycles. To prevent thermal stress and cracking, the rotors utilize Brembo’s patented Pillar Venting Technology (PVT), which enhances cooling potential and increases resistance to cracking by more than 40% compared to traditional fin designs.

• Manufacturer Part Number: KTX4080
• High Carbon cast iron discs for superior heat dissipation and reduced brake judder
• Prime low-Met pads designed to match or exceed OE performance standards
• Pillar Venting Technology (PVT) improves rotor cooling and structural integrity
• Direct-fit installation with all necessary fixing hardware included
• Special alloy materials used in Xtra disc production for high thermo-mechanical resistance

Fits select 2015-2024 Audi A3, S3, TT, and Q3, and Volkswagen Arteon, Atlas, Golf R, and Tiguan models.

The Brembo KTX4079 Rear Disc Brake Kit is a comprehensive braking solution engineered to restore and enhance OE-level stopping power. This kit pairs Brembo Prime Low-Met pads with high-carbon cast iron rotors to provide a precise fit and superior thermal management. The high-carbon material increases the damping coefficient, effectively reducing vibration and brake noise while facilitating faster heat transfer to prevent brake fade during spirited driving or heavy loads.

The included rotors feature a cross-drilled surface designed to optimize cooling and maintain a clean friction surface. Each kit is supplied with all necessary fixing hardware to ensure a secure, straightforward installation that meets factory tolerances. Designed for longevity and consistent pedal feel, these components provide the thermo-mechanical stress resistance required for modern MQB-platform vehicles.

• High Carbon Cast Iron: Rotors utilize HC material for improved heat conduction and reduced NVH (noise, vibration, harshness).
• Cross-Drilled Braking Surface: Performance-enhancing holes improve rotor cooling and maintain friction consistency.
• Prime Low-Met Pads: Formulated for performance and comfort, providing a direct alternative to original equipment pads.
• Installation Ready: Includes all essential fixing hardware for a complete rear brake service.
• Manufacturer Part Number: KTX4079

Fits select 2008-2015 Audi TT Quattro, TT RS Quattro, and TTS Quattro.

This Brembo rear disc brake kit (KTX4067) is a comprehensive solution designed to restore and maintain the original equipment braking characteristics of your vehicle. By combining high-carbon rotors with Prime Low-Met pads, this kit provides consistent stopping power, superior heat dissipation, and reduced NVH (noise, vibration, and harshness) in all driving conditions.

• High Carbon Rotors: Cast from high-carbon iron to provide a higher damping coefficient, which minimizes vibration and noise while accelerating heat transfer away from the braking surface.
• Pillar Venting Technology (PVT): Utilizes Brembo's patented pillar venting design to optimize cooling airflow and increase the rotor's resistance to thermal cracking by more than 40%.
• Prime Low-Met Pads: Developed to meet OE standards, these pads focus on performance and comfort through specialized friction materials and included installation accessories.
• Complete Installation Hardware: Each kit includes the necessary fixing hardware to ensure a simple, secure, and factory-spec installation.
• OE-Equivalent Materials: Brembo utilizes the same high-standard alloys and production stages for this aftermarket kit as used for original vehicle manufacturing.

Fits select 2008-2012 Audi A4, A4 Quattro, A5, A5 Quattro, S4, and S5.

The Brembo KTX4055 Front Disc Brake Kit is engineered to provide professional-grade stopping power and OE-equivalent performance for your Audi. This comprehensive kit includes Brembo Prime Low-Met pads and high-carbon rotors, designed to deliver consistent friction and thermal stability across all driving conditions. The Prime pads prioritize comfort and control, utilizing patented solutions to match the quality and feel of original equipment.

The included brake discs are manufactured from high-carbon cast iron, which offers a higher damping coefficient than standard materials to significantly reduce vibration and noise. This material also provides superior heat conduction, allowing for faster cooling of the braking surfaces. For enhanced thermal management, the rotors feature performance-enhancing holes designed to vent gas and heat at high temperatures. Every kit includes the necessary fixing hardware to ensure a straightforward and secure installation.

• Manufacturer Part Number: KTX4055
• High-carbon cast iron construction for superior heat dissipation and noise reduction
• Prime Low-Met brake pads designed for OE-level performance and pedal feel
• Drilled rotor surface for improved cooling and debris removal
• Complete kit with all necessary fixing hardware for direct installation

Fits select 2012-2021 BMW 2 Series, 3 Series, and 4 Series models including 228i, 230i, 320i, 328i, 330i, 428i, and 430i (including xDrive and Gran Coupe variants).

The Brembo KTX0161 Front Disc Brake Kit provides a complete OE-spec solution for drivers seeking controlled stopping power and improved thermal management. This kit pairs Brembo’s Prime Ceramic brake pads with high-carbon cast iron rotors to deliver a significant reduction in noise and vibration while maintaining consistent performance across all driving conditions.

The rotors feature a high-carbon alloy that offers superior damping coefficients and thermal conductivity, allowing for faster heat transfer away from the friction surface. Performance-enhancing cooling holes are intricately machined into the braking surface to optimize rotor cooling at high temperatures and maintain an aggressive aesthetic. The included Prime Ceramic pads are engineered for low-dust emission, helping to keep your wheels cleaner for longer intervals.

• Manufacturer Part Number: KTX0161
• Rotor Material: High Carbon cast iron for enhanced damping and heat dissipation
• Brake Pad Material: Prime Ceramic for low noise and minimal dust
• Design: Drilled braking surface for improved cooling and wet-weather performance
• Installation: Replaces factory front brake components with original equipment specifications
• Included: Front brake rotors and ceramic brake pads

Fits select 2008-2015 Audi TT Quattro, TT RS Quattro, and TTS Quattro.

The Brembo KTX0156 OE Rear Disc Brake Kit is engineered to provide original equipment stopping performance and comfort. This comprehensive kit includes High Carbon cast iron rotors and Prime Ceramic brake pads, designed to work together to minimize vibration and maximize heat dissipation. The rotors feature Brembo's patented Pillar Venting Technology (PVT), which improves cooling capacity and provides over 40% more resistance to thermal cracking compared to traditional vane designs. The included Prime Ceramic pads are formulated to reduce friction wear and brake dust, keeping wheels cleaner while maintaining a quiet, comfortable ride.

• High Carbon Cast Iron: Provides superior damping coefficients to reduce noise and vibration while improving thermal conductivity.
• Pillar Venting Technology (PVT): Patented pillar geometry improves cooling flow and enhances rotor structural integrity.
• Prime Ceramic Pads: Engineered for low-dust emission and minimal noise for a premium driving experience.
• Complete Solution: Includes all necessary components for a full rear axle brake service.
• Manufacturer Part Number: KTX0156

Fits select 2006-2021 Volkswagen Golf, GTI, Golf R, R32, Passat, Golf Alltrack, and Golf SportWagen.

Restore consistent, controlled stopping power to your vehicle with the Brembo Rear Disc Brake Kit (KTX0155). Engineered as a premium alternative to standard replacements, this kit utilizes high-carbon cast iron rotors and Prime Ceramic pads to deliver superior thermal management and a quiet, comfortable ride. The high damping coefficient of the carbon-rich alloy significantly reduces vibration and noise, while the advanced metallurgy ensures faster heat transfer away from the braking surfaces to minimize cooling times.

• Prime Ceramic Brake Pads: Specifically formulated to minimize noise and vibration for maximum driving comfort with low dust emission for cleaner wheels.
• High Carbon Rotors: Manufactured with materials that match or exceed original equipment standards for greater resistance to thermo-mechanical stress.
• Xtra Design Performance: Features intricate holes in the braking surface designed to improve cooling at high temperatures and enhance bite.
• Direct OE Replacement: Precision-engineered for a factory fit on Volkswagen chassis spanning from 2006 to 2021.
• Manufacturer Part Number: KTX0155

Fits select 2014-2024 Audi A3, S3, RS3, Q3, TT and Volkswagen Golf, GTI, Jetta, Arteon, and Taos models. This Brembo front disc brake kit provides a complete premium replacement solution for your braking system, combining high-carbon rotors with advanced ceramic friction material.

This kit features Brembo Prime Ceramic Brake Pads, engineered to minimize noise and vibration while significantly reducing brake dust. These pads ensure your wheels stay cleaner for longer while providing consistent pedal feel and stopping performance. The included High Carbon cast iron discs offer a higher damping coefficient than standard materials, which effectively decreases vibration and improves heat conduction for faster cooling during heavy use.

• Brembo Part Number: KTX0146
• Prime Ceramic Pads: Low-dust, low-noise friction material for maximum comfort.
• High Carbon Cast Iron Rotors: Enhanced thermal conductivity and reduced vibration.
• Aggressive Aesthetic: Specialized drilling in the braking surface improves cooling at high temperatures and helps clear gases.
• Direct Replacement: Manufactured to match original manufacturer specifications for fit and material quality.

Fits select 2014-2024 Audi A3, S3, RS3, and Volkswagen Golf, GTI, Golf R, and Jetta models. Refer to the fitment table below for specific submodel compatibility.

The Brembo KTX0145 OE Front Disc Brake Kit provides a professional-grade replacement solution engineered for consistent stopping power and refined driving comfort. This kit combines High Carbon (HC) cast iron rotors with Brembo Prime Ceramic pads to deliver a significant reduction in noise, vibration, and brake dust. The High Carbon metallurgy offers a higher damping coefficient than standard materials, improving heat conduction and shortening cooling times to prevent brake fade under thermo-mechanical stress.

This kit features Xtra series disc attributes, utilizing performance-enhancing holes in the braking surface designed to improve rotor cooling at high temperatures and maintain friction efficiency in all conditions. The Prime Ceramic friction material is specifically formulated to minimize vibration for maximum driving comfort while ensuring aesthetically clean wheels through low dust emission.

• Manufacturer Part Number: KTX0145
• Rotor Material: High Carbon (HC) cast iron
• Brake Pad Compound: Prime Ceramic (low dust and low noise)
• Rotor Design: Precision-drilled for improved cooling and cleaning
• System Placement: Front Axle
• Included Components: Front brake rotors and ceramic brake pad set

Fits select 2014-2024 Volkswagen Golf, e-Golf, Golf SportWagen, GTI, Jetta, and Golf R models. This Brembo Front Disc Brake Kit is a complete braking solution designed to provide consistent stopping power and thermal management for daily driving and performance use.

This kit features Brembo Xtra brake discs, manufactured from a special high-carbon alloy that offers superior resistance to thermo-mechanical stress. The cross-drilled braking surface enhances rotor cooling at high temperatures and helps maintain grip by constantly cleaning the pad surface. The high-carbon cast iron construction provides a higher damping coefficient than standard materials, effectively reducing vibration and noise while improving heat conduction away from the braking surfaces.

Paired with these rotors are Brembo Prime Ceramic Brake Pads, engineered to minimize noise and vibration for a comfortable driving experience. The ceramic friction formulation is designed for low dust emission, keeping wheels cleaner for longer and reducing long-term maintenance requirements. Every component in this kit is manufactured to meet or exceed original equipment standards, ensuring a precise fit and reliable performance.

• Manufacturer Part Number: KTX0144
• Position: Front
• Rotor Style: Xtra Cross-Drilled
• Rotor Material: High-Carbon Cast Iron
• Brake Pad Material: Prime Ceramic
• Includes high-performance drilled rotors and low-dust ceramic pads
• Direct replacement for factory braking components

Fits 2016-2022 Audi TTS Quattro Base.

Restore the stopping performance of your vehicle with this Brembo OE replacement front disc brake kit (MPN KTX0139). This comprehensive package combines Brembo High Carbon cast iron rotors with Prime Ceramic pads to deliver professional-grade thermal management and a quiet, comfortable ride. The rotors utilize Brembo's patented Pillar Venting Technology (PVT), which improves cooling efficiency and increases resistance to thermal cracking by over 40% compared to traditional vane designs.

The included Prime Ceramic brake pads are engineered to minimize vibration and noise while providing a low-dust solution that keeps wheels cleaner for longer. By using high-carbon materials, these rotors provide a higher damping coefficient and superior heat conduction, ensuring stable brake behavior even under significant thermo-mechanical stress.

• Brembo MPN: KTX0139
• Patented Pillar Venting Technology (PVT) for enhanced cooling and durability
• High Carbon cast iron rotors reduce vibration and improve heat dissipation
• Prime Ceramic pads designed for low noise, low dust, and maximum comfort
• Direct replacement for factory braking components

Fits select 2014-2024 Audi A3, S3, RS3, Q3 and Volkswagen Golf, GTI, Jetta, Tiguan, and Arteon models.

The Brembo KTX0138 Front Disc Brake Kit provides a complete OE-quality solution for maintaining or restoring factory-level stopping performance. This kit features Brembo High Carbon cast iron rotors engineered to match the original manufacturer's material specifications. By utilizing a high damping coefficient, these rotors minimize vibration and noise while improving heat conduction for faster cooling during heavy braking cycles.

Paired with Prime Ceramic Brake Pads, this system is designed for the daily driver who demands comfort and cleanliness. The ceramic friction formulation significantly reduces dust emissions to keep wheels clean while eliminating the harsh noise often associated with high-performance braking. Every rotor in this kit incorporates Brembo's patented Pillar Venting Technology (PVT), which increases resistance to thermal cracking by over 40% compared to traditional vane designs.

• Manufacturer Part Number: KTX0138
• Position: Front Axle
• Rotor Material: High Carbon cast iron for superior thermal management
• Venting Tech: Patented Pillar Venting Technology (PVT) for optimized cooling
• Pad Material: Prime Ceramic for low dust and quiet operation
• Installation: Replaces factory front rotors and pads with no modifications required

Fits select 2015-2024 Audi A3, Q3, S3, TT, TTS, and TTRS, plus Volkswagen Arteon, Atlas, Golf R, and Tiguan.

The Brembo KTX0136 Rear Disc Brake Kit is a complete service solution designed to restore original equipment braking performance while enhancing driving comfort. This kit combines high-carbon cast iron rotors with Brembo Prime Ceramic pads to deliver consistent stopping power, reduced vibration, and lower dust emissions compared to standard aftermarket alternatives.

• High-Carbon Rotors: Constructed from a specialized alloy that increases the damping coefficient to significantly reduce brake squeal and pedal vibration. The high-carbon content also improves thermal conductivity, allowing the rotors to dissipate heat faster and resist thermo-mechanical stress.
• Prime Ceramic Brake Pads: Formulated to minimize friction wear and brake dust, keeping wheels cleaner for longer intervals. These pads are engineered for maximum driving comfort with a focus on noise reduction.
• Xtra Performance Design: Features a performance-oriented aesthetic with drilled braking surfaces that enhance cooling and maintain friction levels even at high operating temperatures.
• Complete Kit: Includes everything needed for a rear axle brake refresh, ensuring all components work in harmony for optimal safety and longevity.
• MPN: KTX0136

Fits select 2006-2017 Toyota RAV4 and 2009-2013 Toyota Matrix models.

The Brembo KTX0132 Front Disc Brake Kit provides a premium braking upgrade by combining performance-oriented Xtra drilled rotors with Prime Ceramic brake pads. This kit is engineered to deliver consistent stopping power, improved thermal management, and enhanced driving comfort. The rotors utilize high-carbon cast iron to provide a higher damping coefficient, reducing vibrations and noise while accelerating heat dissipation from the friction surface.

• Brembo Xtra Rotors: Features performance-enhancing holes in the braking surface designed to improve cooling at high temperatures and maintain a higher friction coefficient.
• Prime Ceramic Pads: Formulated to minimize noise and vibration for maximum comfort while producing low dust emissions to keep wheels cleaner.
• High-Carbon Construction: Offers superior resistance to thermo-mechanical stress compared to standard materials, ensuring durability under heavy braking loads.
• Professional Design: Developed to meet or exceed original equipment standards, using the same material grade as original manufacturer specifications.

• Manufacturer Part Number: KTX0132
• Placement on Vehicle: Front Axle
• Rotor Style: Drilled
• Rotor Material: High Carbon Cast Iron
• Pad Material: Prime Ceramic
• Fitment: Toyota RAV4 (2006-2017), Toyota Matrix (2009-2013)

Fits select 2008-2012 Audi A4, A4 Quattro, A5, A5 Quattro, S4, and S5 models.

The Brembo KTX0106 Front Disc Brake Kit provides a professional-grade replacement for your vehicle’s braking system, combining high-carbon rotors with Prime ceramic pads. Engineered to meet or exceed original equipment standards, this kit focuses on heat dissipation and vibration damping to provide smooth, consistent stopping power.

• High-Carbon Rotors: Constructed from cast iron with a high carbon content to improve thermal conductivity and increase the damping coefficient, resulting in less noise and faster cooling.
• Prime Ceramic Pads: Specially formulated to minimize friction wear and reduce brake dust emission, keeping wheels cleaner while providing maximum driving comfort.
• Xtra Disc Design: Features performance-enhancing holes in the braking surface to optimize rotor cooling at high temperatures and improve bite in varying conditions.
• Complete Kit: Includes the necessary components for a direct replacement of front braking hardware.
• Manufacturer Part Number: KTX0106

Fits select 2008-2015 Audi TT Quattro, TTS Quattro, and TT RS Quattro.

This Brembo rear disc brake kit is engineered to provide OE-quality stopping power and improved thermal management for high-performance Audi applications. The kit features Brembo Prime Ceramic brake pads, specifically formulated to minimize noise and vibration while reducing dust emissions to keep wheels cleaner for longer intervals.

The included brake rotors are cast from high-carbon iron, offering a higher damping coefficient than standard materials to further eliminate brake squeal and chatter. These rotors utilize Brembo’s patented Pillar Venting Technology (PVT), which improves cooling capacity and increases resistance to thermal cracking by more than 40% compared to traditional vane designs.

• Manufacturer Part Number: KTX0104
• Includes Prime Ceramic brake pads for low-noise, low-dust performance
• High-carbon cast iron rotors for superior heat conduction and damping
• Patented Pillar Venting Technology (PVT) enhances cooling and durability
• Direct replacement for factory rear brake components

Fits select 2014-2025 Cadillac CT5, CT6, and CTS, and 2016-2024 Chevrolet Camaro.

Brembo UV Coated rotors are engineered as direct-fit replacements that meet or exceed original equipment specifications. These rotors feature an environmentally friendly, solvent-free UV coating that offers superior corrosion protection across the entire disc, including the braking surfaces. Constructed from high-carbon cast iron where applicable, these rotors minimize noise and vibration to provide maximum performance and enhanced driving comfort.

• Superior Protection: Solvent-free UV coating protects the disc against corrosion and environmental wear.
• High-Carbon Cast Iron: Dampens vibrations and reduces brake noise for a smoother ride.
• Installation Ready: Includes a fixing screw kit with all necessary hardware for a straightforward replacement.
• Maintenance Friendly: Intelligent marking location displays the manufacturer part number and minimum thickness for easy inspection.
• MPN: 09.N287.21

This Part Fits: