Fits select 2006-2014 Mercedes-Benz CL63 AMG, CL65 AMG, S63 AMG, and S65 AMG (Base).

This SHW Rear Dimpled Lightweight Brake Rotor is engineered to meet the high thermal and mechanical demands of AMG performance luxury coupes and sedans. Utilizing a lightweight construction, this rotor reduces unsprung weight for improved suspension response and handling dynamics. The dimpled friction surface facilitates gas venting and heat dissipation without the structural risks associated with through-drilled rotors, maintaining consistent pedal feel during spirited driving.

• Precision engineered for rear-axle fitment on CL and S-Class AMG models
• Dimpled surface provides superior degassing and heat management
• Lightweight design reduces rotational mass for enhanced performance
• Direct replacement for OE-style brake rotors
• Manufacturer Part Number: TRX42212
• Replaces Reference Number: 2214230812-28

Fits 2006-2014 Mercedes-Benz CL63, CL65, S63, and S65 AMG models.

This SHW Performance front dimpled lightweight brake rotor is a precision-engineered upgrade for high-performance Mercedes-Benz braking systems. Designed to replace the factory unit, this rotor utilizes a specialized dimpled surface to effectively dissipate heat and vent gasses without the structural vulnerability sometimes found in fully cross-drilled rotors. The lightweight design helps reduce unsprung mass, contributing to more responsive handling and improved suspension dynamics under demanding driving conditions.

• Manufacturer Part Number: TFX42311
• Reference/OE Number: 2214211312-64
• Position: Front
• Rotor Type: Dimpled, Lightweight
• Finish: Cast and machined

Authorized Vehicle Fitment:

• 2008-2014 Mercedes-Benz CL63 AMG Base
• 2008-2014 Mercedes-Benz CL65 AMG Base
• 2008-2013 Mercedes-Benz S63 AMG Base
• 2006-2013 Mercedes-Benz S65 AMG Base

Fits select 2005-2025 Porsche Boxster and Cayman models, including 718 variants (2.0L).

This SHW Rear Drilled MB Brake Rotor is engineered for high-performance European vehicles requiring consistent thermal management and stopping power. Featuring a precision cross-drilled surface, this rotor facilitates efficient heat dissipation and gas venting to maintain friction levels and reduce brake fade during spirited driving. This rotor is specifically designed as a direct replacement for vehicles equipped with standard steel/iron braking systems and is not compatible with ceramic brake options.

• Manufacturer Part Number: PRX39873
• Rotor Type: Cross-Drilled MB
• Position: Rear
• Fitment: For models without Ceramic Brakes
• Design: Drilled for superior cooling and wet-weather performance

Fits select 2017-2024 Porsche 911 models (3.0L) including Carrera, Turbo, GT3, and Targa trims equipped with factory steel braking systems.

This SHW MB series brake rotor is a high-performance replacement designed specifically for the right rear position. Engineered to meet the demanding thermal requirements of the Porsche 911 platform, the cross-drilled surface pattern effectively clears gas and debris from the pad interface while significantly improving heat dissipation. This ensures consistent pedal feel and reduced brake fade during high-load operating conditions.

• Position: Right Rear
• Rotor Style: Cross-Drilled MB
• Brake System: For vehicles without Ceramic Brakes
• Engine Compatibility: 3.0L
• Manufacturer Part Number: PRR31624
• OE Reference Number: 9P1615602

Fits select 2001-2016 Porsche 911 models (3.8L) including Carrera, Turbo, Targa, and GT series. This rotor is specifically designed for vehicles equipped with standard iron brake systems and is not compatible with Carbon Ceramic (PCCB) options.

This SHW MB series brake rotor provides a direct-replacement performance upgrade for the rear right corner of your Porsche. The drilled and dimpled surface pattern is engineered to maximize heat dissipation, vent out-gassing during aggressive braking, and maintain a consistent friction surface by shedding water and debris. Built to exacting tolerances, this rotor ensures smooth operation and reliable stopping power for both daily driving and spirited performance applications.

• Position: Rear Right
• Surface Finish: Drilled and Dimpled
• System Compatibility: For models without Ceramic Brakes (Iron Discs only)
• Series: MB
• Manufacturer Part Number: PRR31224
• OE Interchange: 99635240602

Fits select 2016-2025 Porsche 718 Boxster, 718 Cayman, Boxster, and Cayman models without ceramic brakes.

The SHW Left Rear Drilled MB Brake Rotor (PRL39823) is a high-performance braking solution engineered to meet the exact tolerances required for Porsche GT and Spyder variants. Designed specifically for vehicles equipped with factory iron rotors rather than Porsche Ceramic Composite Brakes (PCCB), this rotor features a precision-drilled surface that maximizes heat dissipation and maintains a clean pad contact surface for consistent stopping power during spirited use.

• Precision Performance: Cross-drilled design effectively vents gases and heat to minimize brake fade.
• OEM Integration: Engineered to replace OE part number 98135240300, ensuring a direct bolt-on fit without modification.
• Position: Left Rear.
• Quality Tested: Rigorously manufactured to provide long-lasting service life and predictable pedal feel.

Note: Only for use on vehicles without ceramic brakes.

Upgrade your Porsche's braking performance with this SHW Drilled & Dimpled Brake Rotor. Designed for the left rear position, this rotor is a direct replacement for 2001-2016 Porsche 911 models equipped with standard cast-iron braking systems. It is engineered to provide consistent heat dissipation and bite for high-performance street or track use.

Fits select 2001-2016 Porsche 911 models including Carrera, Turbo, Targa, GT2, and GT3 (3.8L) without Ceramic brakes.

• Position: Left Rear
• Design: Drilled and Dimpled for superior cooling and gas evacuation
• Compatibility: Only for vehicles without Ceramic Composite Brakes (PCCB)
• Material: High-carbon cast iron for maximum thermal stability
• Manufacturer Part Number: PRL31124
• OE Cross-Reference: 99635240502

This rotor replaces worn factory units, restoring the braking torque and heat management required by the Porsche 911 platform. The drilled and dimpled surface prevents brake fade by venting gases and maintaining a clean contact patch between the pad and rotor.

Fits select 2012-2016 Porsche 911, Boxster Spyder, and Cayman GT4 models without ceramic brakes. This SHW MB series brake rotor is engineered as a high-performance replacement for your factory braking system, specifically designed for vehicles equipped with cast-iron rotors rather than PCCB (Porsche Ceramic Composite Brake) systems.

This right front rotor features a drilled and dimpled surface pattern, designed to optimize gas venting, improve initial bite, and maintain consistent performance under high thermal loads. SHW’s precision casting and machining ensure OE-level balance and fitment, making it an ideal choice for enthusiasts looking to maintain or enhance their vehicle's stopping power during spirited driving or track sessions.

• Position: Right Front
• Design: Drilled and Dimpled (MB Series)
• MPN: PFR39912
• OE Reference: 99135140401
• Fitment Note: For models without ceramic brakes only

Authoritative Vehicle Fitment

Fits select 2005-2008 Porsche Boxster and Cayman models (2.7L).

This SHW Monobloc brake rotor is engineered to meet the high-performance demands of your Porsche braking system. Featuring a precision cross-drilled design, this right-front rotor provides superior heat dissipation and gas venting, ensuring consistent stopping power and reduced brake fade during spirited driving. As a direct replacement for the factory component, it maintains the strict tolerances and balance required for the 987 chassis.

• Position: Right Front
• Type: Cross-Drilled Monobloc
• Manufacturer Part Number: PFR39872
• OEM Reference Number: 98735140201
• Engine Compatibility: 2.7L Flat-6

Each rotor is manufactured with high-carbon metallurgy for improved thermal stability and resistance to warping. The cross-drilled pattern not only enhances wet-weather performance by clearing water from the pad surface but also reduces unsprung weight for better suspension response.

Fits select 2013-2016 Porsche Boxster and Cayman models (2.7L) equipped without ceramic brakes.

This SHW Performance brake rotor is a high-performance replacement for the right front position, engineered to provide consistent stopping power and thermal management. Featuring a precision drilled and dimpled surface pattern, this rotor effectively vents gases and clears brake dust to maintain a clean contact patch between the pad and rotor. The MB-series design ensures a direct OE fitment while offering the durability required for spirited driving and heat cycles.

• Position: Front Right
• Surface Style: Drilled and Dimpled
• Manufacturer Part Number: PFR39812
• Construction: MB High-Carbon Design
• Compatibility: For models without Ceramic Composite Brakes (PCCB)

Fits select 2001-2012 Porsche 911 Carrera S, Carrera 4S, GTS, Targa 4S, and Turbo models (3.8L).

This high-performance brake rotor from SHW is engineered specifically for the right-front position of the Porsche 911 chassis. Featuring a drilled and dimpled MB design, this rotor provides improved heat dissipation and consistent braking performance under demanding conditions. Designed as a direct-fit replacement for vehicles without ceramic brakes, it ensures factory-level fitment and reliable stopping power.

• Position: Right Front
• Design: Drilled-Dimpled MB
• Material: High-quality casting for heat resistance and durability
• Fitment Note: Specifically for vehicles without Ceramic Brakes
• Manufacturer Part Number: PFR31022
• Cross Reference Part Number: 99635141004

Fits select 2012-2016 Porsche 911, Boxster Spyder, and Cayman GT4 (3.8L) models without ceramic brakes.

This SHW high-performance front left brake rotor (PFL39911) is engineered to meet the thermal demands of spirited driving and track applications. Featuring a drilled and dimpled surface, this MB-series rotor optimizes heat dissipation and gas evacuation, providing up to 50% better cooling compared to standard designs to prevent brake fade. It is designed as a direct-fit replacement for the factory component, ensuring precise installation and consistent stopping performance.

• Position: Front Left
• Surface Style: Drilled and Dimpled
• Brake System: Optimized for vehicles without Ceramic Brakes
• Engine Compatibility: 3.8L
• Series: MB Monoblock High-Performance
• Manufacturer Part Number: PFL39911
• Reference OE Number: 99135140301

Fits 2005-2008 Porsche Boxster and 2007-2008 Porsche Cayman (2.7L).

This SHW monobloc brake rotor is engineered to provide reliable stopping power and improved heat management for your Porsche. The cross-drilled design effectively vents gases and brake dust, ensuring a clean pad contact surface for consistent braking performance. As a direct replacement for the factory unit, this rotor is machined to tight tolerances for a precise fit and balanced rotation.

• Position: Left Front
• Design: Monobloc, cross-drilled
• Optimized thermal dissipation for reduced brake fade
• Engineered for direct OE replacement compatibility
• Manufacturer Part Number: PFL39871
• Cross-reference OE Number: 98735140101

Fits 2013-2016 Porsche Boxster and Cayman (2.7L) models without ceramic brakes.

This SHW Performance brake rotor is engineered as a direct-fit replacement for the factory left front unit on Porsche 981 chassis vehicles. Featuring a specialized Drilled and Dimpled MB design, this rotor provides superior thermal management and consistent friction levels by effectively venting gases and clearing brake dust from the pad surface. This design ensures reliable stopping power and reduced brake fade during performance driving conditions.

• Manufacturer Part Number: PFL39811
• OE Cross-Reference: 98135140101
• Position: Left Front
• Rotor Pattern: Drilled and Dimpled MB
• Fitment: Specific to models with the 2.7L engine and standard iron brakes
• Compatibility: Replaces original equipment on vehicles without Porsche Ceramic Composite Brakes (PCCB)

Fits select 2001-2012 Porsche 911 Carrera S, Carrera 4S, GTS, Targa 4S, and Turbo models (3.8L).

Engineered for high-performance braking, this SHW MB series front left rotor features a drilled and dimpled surface designed to optimize thermal management and gas venting. By reducing brake fade and maintaining a clean pad-to-rotor contact surface, this component ensures consistent stopping power under demanding driving conditions. This rotor is intended as a direct replacement for 911 models equipped with factory steel brakes and is not compatible with ceramic brake systems.

• Position: Front Left
• Rotor Style: Drilled and Dimpled
• Brake System: For vehicles without ceramic brakes
• Series: MB Rotor
• Manufacturer Part Number: PFL30922

Fits 2007-2013 Porsche 911 Turbo and Turbo S (3.8L) models equipped with standard steel brakes (not for vehicles with Porsche Ceramic Composite Brakes - PCCB).

This SHW Performance left front brake rotor is engineered as a direct technical replacement for the factory component (OE part number 997.351.405.01). Featuring a specialized drilled and dimpled friction surface, this rotor is designed to optimize thermal management and gas venting during high-performance driving. The MB-series construction ensures structural integrity under high heat loads while maintaining the precise tolerances required for the 997 chassis.

• Position: Left Front
• Design: Drilled and Dimpled for enhanced cooling and outgassing
• Fitment Note: Specifically for models without ceramic brake packages
• Replaces OE Number: 99735140501
• Direct-fit installation to factory hubs and calipers
• Manufacturer Part Number: PFL30904

Vehicle Fitment

Fits 2015-2018 BMW X5 M and 2015-2019 BMW X6 M (4.4L).

Engineered for high-thermal stress environments, this SHW lightweight brake rotor is a precision-manufactured replacement for the right rear position on BMW M-series SUVs. The cross-drilled design effectively manages heat by increasing surface area and allowing brake gases and debris to escape, ensuring consistent pedal feel and stopping power during spirited driving.

• Specifically designed for the 4.4L BMW X5 M and X6 M drivetrain
• Cross-drilled pattern for improved cooling and outgassing
• Lightweight construction reduces unsprung mass for better suspension response
• Direct fit replacement for the factory right rear rotor
• Manufacturer Part Number: BRR48504
• OE Reference: 34212284904

Fits 2018-2021 BMW M2 Base, Competition, and CS (3.0L).

This SHW lightweight brake rotor is a precision-engineered replacement for the right rear position, designed to reduce unsprung mass and improve suspension response. The cross-drilled surface provides superior thermal management by venting gases and heat away from the friction surface, maintaining consistent bite and preventing brake fade during aggressive driving. Constructed to meet exact factory tolerances, it serves as a direct bolt-on replacement for the OE component.

• Position: Right Rear
• Rotor Type: Cross-Drilled Lightweight
• Manufacturer Part Number: BRR48254
• Interchange Part Number: 34118072020
• Engine: 3.0L I6
• Compatible with factory calipers and mounting hardware

Fits select 2012-2019 BMW M5, M6, and M6 Gran Coupe (4.4L).

This SHW Right Rear Cross-Drilled Lightweight Brake Rotor is a precision-engineered replacement designed to maintain the high-performance braking standards of the BMW M-series. The cross-drilled surface provides effective heat dissipation and allows for the venting of gases and debris, ensuring consistent pad contact and bite in both dry and wet conditions. Its lightweight construction reduces unsprung mass at the wheel hub, contributing to improved suspension articulation and sharper handling response.

• Position: Right Rear
• Rotor Style: Cross-Drilled for superior thermal management
• Design: Lightweight construction to minimize unsprung weight
• Manufacturer Part Number: BRR48181
• Replaces OE Part Number: 34212284104

Fits 2006-2010 BMW M5 and M6 Base models (5.0L).

Restore the braking performance and heat management of your E60-series M-car with this SHW right rear cross-drilled lightweight brake rotor. Engineered to meet the high-thermal demands of the 5.0L V10 powertrain, this rotor utilizes a cross-drilled pattern to vent gases and dissipate heat during spirited driving or track sessions. The lightweight construction reduces unsprung mass, helping to maintain the precise suspension dynamics your BMW is known for.

• Position: Right Rear
• Rotor Style: Cross-Drilled
• Construction: Lightweight Performance Design
• Direct replacement for original equipment
• Manufacturer Part Number: BRR48081

Fits 2008-2013 BMW 1 Series M and M3 (4.0L).

This SHW Right Rear Cross-Drilled Lightweight Brake Rotor is engineered to meet the demanding thermal and mechanical requirements of BMW M-series vehicles. Featuring a precision cross-drilled surface, this rotor facilitates rapid heat dissipation and allows brake gases to escape, ensuring consistent friction and reducing fade under high-load conditions. The lightweight design focus minimizes unsprung mass, directly benefiting suspension articulation and steering response.

• Position: Right Rear
• Rotor Style: Cross-Drilled for maximum cooling and outgassing
• Construction: High-carbon lightweight design for reduced rotational weight
• Fitment Type: Direct replacement for OE part number 34212283804
• Manufacturer Part Number: BRR42854

Fits select 2001-2008 BMW M3 and Z4 M Coupe/Roadster models (3.2L).

This SHW Performance right rear brake rotor is engineered to provide high-performance stopping power and heat management for BMW M-series vehicles. Featuring a cross-drilled surface, this rotor improves initial bite and effectively vents brake gases and heat during spirited driving. The lightweight construction reduces unsprung mass, contributing to sharper suspension response and improved handling dynamics.

• Position: Right Rear
• Type: Cross-Drilled Lightweight Rotor
• Direct OE-replacement for factory part number 34212282304
• Designed for optimized heat dissipation and consistent friction levels
• Compatible with factory calipers and mounting points
• Manufacturer Part Number: BRR42834

Fits select 2018-2025 BMW 530i, 540i, M5, and M8 models (4.4L).

This SHW Right Rear Lightweight Brake Rotor is engineered to provide superior thermal management and reduced unsprung weight for high-performance BMW applications. The cross-drilled design increases surface area for improved heat dissipation and ensures consistent pad contact by venting gas and debris during heavy braking. Built to meet exacting tolerances, this rotor replaces worn factory components with a focus on durability and cooling efficiency.

• Manufacturer Part Number: BRR42504
• Position: Right Rear
• Design: Cross-drilled, lightweight construction
• OE Reference: 34217991104
• Fitment: Specific to 4.4L engine variants across the G30 5-Series and F90/F91/F92/F93 M-series chassis

Fits 2015-2019 BMW X5 M and X6 M (4.4L).

This SHW Left Rear Brake Rotor is engineered to maintain the high-performance braking standards of the BMW M-series. The cross-drilled surface provides superior thermal management by venting gases and heat, ensuring consistent stopping power during aggressive driving. Its lightweight construction is designed to reduce unsprung mass, which improves both suspension articulation and overall handling dynamics on the X5 M and X6 M platforms.

• Position: Left Rear (Driver Side)
• Cross-drilled design for optimal heat dissipation and gas venting
• Lightweight architecture to minimize unsprung weight
• Direct-fit replacement for factory braking components
• Manufacturer Part Number: BRL48503

Fits 2006-2010 BMW M5 and M6 (5.0L).

Restore the braking performance of your vehicle with this SHW lightweight left rear brake rotor. Engineered to meet the exacting standards of the BMW M division, this rotor serves as a direct replacement for the factory component (OE 34212282807). It features a cross-drilled friction surface specifically designed to dissipate heat and vent gases during aggressive braking, ensuring consistent pedal feel and reduced fade.

The lightweight construction helps reduce unsprung weight at the wheel, which can improve suspension articulation and steering response compared to heavier solid castings. Precision-machined for a direct fit, this rotor bolts to the factory hub using existing hardware.

• Position: Left Rear
• Type: Cross-Drilled Friction Surface
• Feature: Lightweight High-Performance Design
• Direct replacement for OE part number: 34212282807
• Manufacturer Part Number: BRL48071

Fits 2020-2025 BMW X5 and X6 models (4.4L).

This SHW lightweight brake rotor is a precision-engineered performance upgrade or replacement for your BMW's braking system. Designed to reduce unsprung mass, the lightweight construction improves suspension response and overall handling dynamics. The cross-drilled surface effectively dissipates heat and vents braking gases, ensuring consistent stopping power and reduced fade during spirited driving or heavy vehicle loads.

• Direct replacement for factory OE part number 34208074285
• Cross-drilled pattern for superior thermal management and wet-weather performance
• Lightweight design reduces rotational mass for improved acceleration and handling
• Specifically machined for the Left Rear position
• Manufacturer Part Number: BRL43507

Vehicle Fitment:

• 2020-2023 BMW X5 M
• 2020, 2024-2025 BMW X5 M Competition
• 2020 BMW X5 M50i & xDrive50i
• 2020-2023 BMW X6 M & M50i
• 2020-2021, 2024-2025 BMW X6 M Competition
• 2024-2025 BMW X6 M60i
• 2020-2025 BMW X6 xDrive40i & sDrive40i

Fits select 2020-2025 BMW X3 M, X3 M Competition, X4 M, X4 M Competition, and X4 M40i (3.0L).

This SHW Performance lightweight brake rotor is engineered to provide superior heat dissipation and weight reduction for high-performance BMW SAVs. Featuring a cross-drilled friction surface, this rotor effectively vents gas and debris during aggressive braking to maintain consistent bite and minimize fade. The lightweight construction reduces unsprung mass, improving both suspension response and handling dynamics.

Built to match or exceed OE specifications, this rotor is treated for immediate use. It arrives "Ready to Install," requiring no pre-degreasing or cleaning preparation, which significantly reduces shop time and labor costs. This component is a direct replacement for the factory left rear rotor.

• Position: Left Rear
• Type: Cross-Drilled Lightweight Rotor
• Manufacturer Part Number: BRL43503
• OE Reference Number: 34118054827
• Finish: Ready to install, no degreasing required
• Compatibility: Specific to 3.0L M-Series and M40i variants

Fits select 2008-2013 BMW 1 Series M and M3 (4.0L).

Restore the braking performance and handling dynamics of your M-Series with this SHW lightweight brake rotor. Engineered specifically for the left rear position, this rotor features a cross-drilled surface designed to vent gasses and dissipate heat effectively, preventing brake fade during aggressive driving or track conditions. The lightweight construction reduces unsprung mass at each corner, allowing the suspension to react more quickly to road surfaces for improved grip and steering feel.

• Cross-Drilled Surface: Maximizes heat dissipation and maintains a clean pad surface for consistent friction.
• Lightweight Engineering: Reduces rotational and unsprung weight to enhance overall vehicle agility.
• Direct Replacement: Designed to install seamlessly into the factory braking system without modifications.
• Position: Left Rear
• Manufacturer Part Number: BRL42853
• OE Reference: 34212283803

Fits select 2001-2008 BMW M3 and Z4 M Coupe/Roadster (3.2L).

This SHW Performance lightweight left rear brake rotor is engineered to provide consistent, high-performance stopping power for the S54-powered BMW M3 and Z4 M. The cross-drilled surface promotes superior heat dissipation and gas venting, preventing brake fade during spirited driving or track sessions. By utilizing a specialized lightweight construction, this rotor reduces unsprung mass at the wheel hub, which improves suspension articulation and overall handling response.

• Position: Left Rear
• Rotor Style: Cross-Drilled, Lightweight
• Engine Compatibility: 3.2L
• OE Reference Number: 34212282303
• Manufacturer Part Number: BRL42833

Vehicle Fitment:

• 2001 BMW M3 Base
• 2005-2006 BMW M3 Base
• 2006-2008 BMW Z4 M Coupe
• 2006-2008 BMW Z4 M Roadster

Fits select 2018-2025 BMW 530i, 540i, M5, and M8 models (4.4L).

This SHW Performance lightweight brake rotor is a direct-fit replacement for the left rear position, engineered to provide high-performance stopping power while reducing unsprung mass. The cross-drilled surface design significantly improves heat dissipation and gas venting during aggressive driving, ensuring consistent friction levels and reduced brake fade. Constructed with high-carbon metallurgy, this rotor offers enhanced thermal stability and durability compared to standard replacements.

• Direct replacement for factory part number 34217991103
• Cross-drilled for superior cooling and wet-weather performance
• Lightweight design reduces unsprung weight for improved suspension response
• High-carbon cast iron construction for maximum thermal capacity
• Precision machined to ensure smooth, vibration-free operation
• Protective finish on the hub and vanes to resist corrosion
• Position: Left Rear
• Manufacturer Part Number: BRL42503