Fits select 2010-2015 Subaru BRZ, Forester, Impreza WRX, Legacy, and Outback models.

This complete front and rear brake kit combines DFC GeoSpec Coated Rotors with 5000 Advanced Brake Pads to provide a balanced, ready-to-install solution for daily driving and light-duty use. By matching OE-spec iron castings with scorched friction material, this kit ensures consistent pedal feel and reliable stopping power without the need for intensive break-in or degreasing.

• GeoSpec Coated Rotors: Formulated with G3000/G11H18 cast iron for thermal stability. The silver-gray finish is applied to prevent corrosion and is ready to install out of the box with no oil cleanup required.
• Precision Machining: Each rotor features a non-directional finish for even pad bed-in and is 100% electronic mill-balanced to prevent vibration.
• 5000 Advanced Brake Pads: Formulated for balanced braking across both axles, these pads are scorched to remove uncured bonding agents, providing immediate friction performance from the first stop.
• Premium Hardware: Includes stainless steel hardware and rubber-coated abutment clips to reduce drag and noise. Premium Rubber-Steel-Rubber (RSR) shims effectively isolate vibration.
• Safe and Quiet: 100% asbestos-free formulation with chamfered and slotted designs (where applicable) to minimize braking noise.

Each kit includes four GeoSpec coated rotors (front and rear), a full set of 5000 Advanced pads, and all necessary installation hardware.

Fits 2015-2021 Subaru WRX Base, Limited, and Premium models.

This complete DFC brake service kit provides a comprehensive solution for refreshing the stopping power and appearance of your Subaru WRX. The kit includes front and rear GeoSpec coated rotors paired with DFC 5000 Advanced brake pads and high-quality stainless steel hardware. Engineered to meet G3000/G11H18 cast iron specifications, these rotors are precision-machined to tight tolerances and electronic mill-balanced to ensure vibration-free performance and a consistent pedal feel.

The GeoSpec silver-gray coating is specifically formulated to resist corrosion and eliminate the need for pre-installation degreasing. Unlike traditional rotors shipped in oil, these arrive dry and ready to bolt onto the hub, significantly reducing installation time. The DFC 5000 Advanced brake pads are scorched during manufacturing to remove uncured bonding agents, which minimizes the necessary bed-in period and provides reliable friction performance from the very first stop.

• Rotors: GeoSpec corrosion-resistant coating with a non-directional finish for even pad bed-in.
• Pads: 5000 Advanced Series, 100% asbestos-free, scorched for immediate stopping power.
• Construction: G3000/G11H18 premium iron castings for maximum thermal stability.
• Hardware: Includes stainless steel abutment clips and rubber-steel-rubber shims to minimize NVH.
• Installation: Direct OE replacement with no modifications required; ships ready to install.
• Warranty: 12-month manufacturer warranty against defects in material and workmanship.

Fits 2022-2023 Genesis G70 and Kia Stinger (2.5L).

This DFC brake kit provides a complete front and rear solution, pairing GeoSpec coated rotors with 5000 Advanced brake pads and all necessary installation hardware. Designed to replace worn OE components, this kit focuses on durability, noise reduction, and a simplified installation process that eliminates the need for degreasing.

• GeoSpec Coated Rotors: Cast from premium G3000/G11H18 iron, these rotors feature a silver-gray finish that provides superior corrosion resistance compared to zinc or conventional paint.
• 5000 Advanced Brake Pads: Specifically formulated for balanced braking and scorched to remove uncured bonding agents, ensuring immediate stopping power and a shortened break-in period.
• Ready to Install: Rotors are dry-shipped and 100% mill-balanced with a non-directional finish, allowing for immediate installation and smooth pad bed-in.
• NVH Suppression: Equipped with rubber-steel-rubber (RSR) shims and rubber-coated abutment clips to minimize noise, vibration, and harshness (NVH).
• Premium Hardware: Includes a full set of stainless steel hardware to eliminate corrosion-related drag and ensure even friction performance.
• Precision Quality: Every rotor is 100% inspected for critical attributes and balanced to ensure zero-vibration performance at any speed.

Fits select 2010-2021 Ford F-150, Ford Expedition, and Lincoln Navigator.

This DFC braking kit combines GeoSpec coated rotors with 5000 Advanced brake pads to provide a comprehensive front-axle service solution. The GeoSpec rotors are manufactured using G3000/G11H18 cast iron and feature a specialized silver-gray finish designed to resist corrosion far more effectively than standard zinc or paint coatings. Unlike traditional rotors, these are processed and shipped dry, allowing for immediate installation without the need to degrease or clean oil-coated surfaces.

The 5000 Advanced brake pads are specifically scorched to remove uncured bonding agents, which minimizes the initial break-in period and provides immediate stopping power. These pads are 100% asbestos-free and include premium Rubber-Steel-Rubber (RSR) shims to reduce noise, vibration, and harshness (NVH). Each rotor is electronic mill-balanced and finished with a non-directional texture for quieter operation and even pad bed-in.

• Rotor Material: G3000/G11H18 iron castings for maximum thermal stability
• Corrosion Protection: GeoSpec silver-gray coating for superior rust resistance
• Pad Formulation: 5000 Advanced scorched pads for consistent pedal feel
• NVH Control: Premium RSR shims and rubber-coated abutment clips reduce drag and vibration
• Ready to Install: Dry-shipped rotors require no pre-degreasing during installation
• Warranty: 12-month manufacturer warranty against defects

Fits select 2008-2021 Lexus NX200t, NX300, NX300h, RX350, RX450h, Toyota Highlander, and Sienna.

This DFC GeoSpec front brake kit provides a complete axle solution, combining specialized rust-resistant rotors with high-performance 5000 Advanced pads. Engineered to meet or exceed OE standards for fit, form, and function, each component is designed to restore factory braking performance while adding superior corrosion protection. The GeoSpec coating eliminates the need for degreasing or brake cleaner during installation, significantly reducing shop time.

• GeoSpec Coated Rotors: Cast from premium G3000/G11H18 iron, these rotors feature a durable silver-gray finish that fights rust. Each rotor is 100% electronic mill-balanced and precision-machined to ensure a vibration-free ride.
• 5000 Advanced Brake Pads: These pads are scorched to remove uncured bonding agents, providing immediate stopping power and a significantly shorter break-in period. The asbestos-free formulation is rotor-friendly for extended service life.
• Enhanced NVH Control: Premium Rubber-Steel-Rubber shims and high-quality stainless steel hardware kits are included to minimize drag, noise, and vibration.
• Precision Finish: Rotors feature a non-directional ground finish to promote faster pad bedding and smoother, quieter stops.

Specifications

• Position: Front
• Rotor Material: G3000/G11H18 Cast Iron
• Coating: GeoSpec Silver-Gray (Rust-Resistant)
• Pad Type: 5000 Advanced (Scorched)
• Hardware: Included (Stainless Steel)
• Shims: Premium Rubber-Steel-Rubber
• Fitment: OE Specification Replacement
• Warranty: 12-Month against defects in material and workmanship

Fits select 2007-2018 Lexus ES300h, ES350 and Toyota Avalon, Camry models.

This DFC brake kit combines GEOSPEC coated rotors and 5000 Advanced pads to restore factory-level braking performance with enhanced corrosion protection. The GEOSPEC rotors are cast from G3000/G11H18 iron and feature a specialized silver-gray paint that resists rust more effectively than standard zinc coatings. These rotors are processed and shipped dry, requiring no degreasing or prep work before installation, which significantly reduces shop time.

The included 5000 Advanced brake pads are scorched during manufacturing to remove uncured bonding agents, ensuring immediate stopping power and a shorter break-in period. To maintain quiet operation, the pads feature premium rubber-steel-rubber (RSR) shims and are chamfered and slotted to reduce vibration and harmonic noise. Each kit includes stainless steel hardware and rubber-coated abutment clips to ensure proper pad movement and eliminate drag.

• Rotor Material: Premium G3000/G11H18 cast iron specifications
• Rotor Finish: Non-directional finish with GEOSPEC corrosion-resistant coating
• Pad Series: DFC 5000 Advanced (100% asbestos-free)
• Balance: 100% mill-balanced for vibration-free operation
• Installation: Ready to install out of the box with no cleaning required
• Included Hardware: Stainless steel hardware and RSR shims
• Warranty: 12-month manufacturer warranty against defects

Fits select 2003-2024 Infiniti (FX35, FX37, FX45, JX35, M, Q, QX series) and Nissan (Murano, Pathfinder, Quest) models. This complete rear brake service kit includes DFC GeoSpec coated rotors, 5000 Advanced brake pads, and a premium hardware kit to restore original equipment braking performance and reliability.

DFC GeoSpec Coated Rotors are engineered using G3000/G11H18 specification cast iron for maximum stability and durability. Each rotor is machined to the industry's tightest tolerances and features a non-directional finish to facilitate even pad bed-in. The rotors are treated with a specialized silver-gray coating that provides superior corrosion resistance compared to traditional zinc or paint, and they are shipped dry and ready for installation without the need for degreasing.

The included 5000 Advanced Brake Pads are platform-specific formulations designed to maintain the balanced braking necessary for modern ABS and automated braking systems. These pads are scorched during manufacturing to remove uncured bonding agents, reducing the initial break-in period and providing consistent pedal feel from the first stop.

• Precision Engineering: Rotors are 100% electronic mill-balanced to ensure vibration-free performance at all speeds.
• Advanced Friction: Scorched, 100% asbestos-free pad formulation for longer life and rotor-friendly operation.
• Enhanced NVH Control: Premium rubber-steel-rubber shims and chamfered/slotted designs reduce noise and vibration.
• Complete Hardware: Includes stainless steel abutment clips and hardware to eliminate drag and prevent premature wear.
• Ready to Install: Dry-processed rotors save up to 2.5 hours per axle by eliminating oil cleaning.
• Warranty: 12-month manufacturer warranty against defects in material and workmanship.

Fits select 2002-2025 Nissan Altima, Juke, Maxima, and Sentra.

This DFC Rear Brake Kit provides a professional-grade solution for restoring factory braking performance while adding long-term corrosion resistance. By combining GeoSpec Coated rotors with 5000 Advanced brake pads, this kit eliminates the need for degreasing rotors at installation and ensures a quiet, vibration-free ride. The specialized silver-gray coating protects the rotor vanes and hats from rust, while the friction surface is safely swept clean by the pads during the initial bed-in process.

• GeoSpec Coated Rotors: Engineered from G3000/G11H18 cast iron for maximum stability. These rotors feature a non-directional finish to promote faster pad seating and are 100% electronic mill-balanced to prevent pedal pulsation.
• 5000 Advanced Brake Pads: Specifically formulated for balanced braking on ABS-equipped vehicles. The pads are scorched to remove uncured bonding agents, significantly increasing initial stopping power and reducing the break-in period.
• Premium NVH Control: Equipped with DFC premium Rubber-Steel-Rubber shims and rubber-coated abutment clips to isolate noise, vibration, and harshness.
• Stainless Steel Hardware: Includes a vehicle-specific hardware kit with stainless steel components to prevent heat-related deterioration and ensure smooth pad movement.
• Precision Fit: Designed to meet exact OE form, fit, and function for a direct-bolt installation with no modifications required.
• Warranty: Includes a 12-month manufacturer warranty against defects in material and workmanship.

Fits select 2015-2017 Honda Odyssey and 2019-2025 Honda Passport models. This complete front axle brake kit combines DFC GeoSpec coated rotors with 5000 Advanced brake pads to restore original equipment performance and pedal feel.

DFC GeoSpec Coated Brake Rotors are engineered to the G3000/G11H18 cast iron specification for maximum stability. These rotors feature a specialized silver-gray finish that provides superior corrosion resistance compared to traditional zinc or painted coatings. Each rotor is dry-shipped and ready to install immediately without the need for degreasing, saving significant time during the brake job. To ensure smooth operation, rotors are 100% electronic mill-balanced and finished with a non-directional surface to facilitate even pad bed-in.

The included 5000 Advanced Brake Pads are scorched during manufacturing to remove uncured bonding agents, reducing the initial break-in period. For enhanced NVH control, the pads utilize premium rubber-steel-rubber shims and are chamfered and slotted to minimize braking noise. The kit is rounded out with a professional-grade hardware kit featuring stainless steel components and rubber-coated abutment clips to prevent drag and premature wear.

• Complete front axle kit includes rotors, brake pads, and hardware
• G3000/G11H18 cast iron rotors for durability and heat management
• GeoSpec silver-gray coating protects against rust and oxidation
• Non-directional rotor finish for faster pad bed-in and quieter stops
• Scorched brake pads for improved initial bite and stopping power
• Multi-layer rubber-steel-rubber shims for noise and vibration damping
• 100% asbestos-free ceramic formulation
• 12-month manufacturer warranty against defects

Fits 2005-2018 Honda CR-V and 2010-2018 Acura RDX models. This DFC Rear Brake Kit is a complete solution for restoring original braking performance and aesthetics, pairing DFC GeoSpec Coated Rotors with 5000 Advanced Brake Pads and essential hardware.

The GeoSpec rotors are engineered from G3000/G11H18 cast iron and feature a specialized silver-gray coating that provides superior rust protection compared to traditional zinc or paint. These rotors are shipped dry and ready to install without the need for degreasing, significantly reducing installation time. Each rotor is mill-balanced and finished with a non-directional surface to ensure immediate, vibration-free performance.

Matched with DFC 5000 Advanced pads, this kit ensures balanced braking critical for vehicles with ABS. The pads are scorched to remove uncured bonding agents, promoting a faster bed-in period. Premium rubber-steel-rubber shims and stainless steel hardware clips are included to minimize noise, vibration, and drag.

• Rotors: GeoSpec silver-gray coated G3000/G11H18 iron for corrosion resistance.
• Brake Pads: 5000 Advanced formula, scorched for immediate stopping power and 100% asbestos-free.
• Hardware: Includes premium rubber-steel-rubber shims and rubber-coated abutment clips.
• Performance: Mill-balanced for zero vibration and precision-cut to OE specifications.
• Efficiency: Ready to install out of the box with no pre-degreasing required.
• Warranty: 12-month manufacturer warranty against material and workmanship defects.

Fits select 2002-2015 Acura ILX and Honda Accord, Civic, CR-V, and Element. This DFC brake kit simplifies front-end brake service by combining GEOSPEC coated rotors with 5000 Advanced pads and all necessary hardware.

DFC GEOSPEC Coated Brake Rotors are cast from G3000/G11H18 iron and feature a specialized silver-gray finish that provides superior corrosion resistance compared to standard zinc plating. These rotors are processed and shipped dry, meaning they require no degreasing or prep work—simply take them out of the box and install. Every rotor is 100% electronic mill-balanced and finished with a non-directional ground surface to ensure smooth, vibration-free stops and a faster pad bed-in process.

The included 5000 Advanced Brake Pads are scorched during manufacturing to remove uncured bonding agents, significantly reducing the initial break-in period. Each kit includes premium rubber-steel-rubber shims and stainless steel hardware to minimize drag, eliminate noise, and prevent premature wear. This complete solution is engineered to match OEM form and function while providing more consistent pedal feel and better response.

• Rotor Material: Premium G3000/G11H18 cast iron
• Coating: GEOSPEC silver-gray corrosion protection
• Pad Formulation: 100% Asbestos-free, scorched for fast bed-in
• Hardware: Stainless steel abutment clips and rubber-coated shims included
• Installation: Dry-shipped rotors require no cleaning before install
• Warranty: 12-month manufacturer defect warranty

Fits select 1997-2015 Honda Civic, Prelude, and Acura ILX. This complete rear brake service kit combines DFC GeoSpec coated rotors with 5000 Advanced brake pads to restore original equipment braking performance while providing superior corrosion resistance.

The GeoSpec rotors are cast from G3000/G11H18 iron and feature a specialized silver-gray coating that protects the hub and cooling vanes from rust. Each rotor is precision-machined to tight tolerances, mill-balanced to eliminate vibration, and finished with a non-directional surface to facilitate faster pad bed-in. Because the rotors are processed and shipped dry, they require no degreasing before installation, significantly reducing service time.

The included DFC 5000 Advanced brake pads are scorched to remove uncured bonding agents, ensuring immediate stopping power with a shortened break-in period. These 100% asbestos-free pads are paired with rubber-steel-rubber shims to dampen noise and vibration. The kit also includes premium stainless steel hardware and rubber-coated abutment clips to ensure smooth caliper movement and prevent premature wear.

• G3000/G11H18 cast iron rotors for maximum stability and durability
• GeoSpec anti-corrosion coating prevents rust and unsightly oxidation
• Mill-balanced and non-directional rotor finish for quiet, smooth stops
• Scorched brake pads for consistent friction and rapid bed-in
• Premium NVH-dampening shims and stainless steel hardware included
• Manufacturer Part Number: 97-15 Acura CSX/Honda Rear Kit
• 12-month warranty against defects in material and workmanship

Fits 2019-2025 Acura RDX (Base, PMC Edition, and SH-AWD).

This DFC front brake kit combines GeoSpec Coated Rotors with 5000 Advanced Brake Pads and premium hardware to restore OE-level braking performance with enhanced corrosion resistance. The rotors are cast from G3000/G11H18 iron for thermal stability and feature a non-directional finish to facilitate even pad bed-in. Each rotor is 100% electronic mill-balanced to prevent vibration and is ready for installation right out of the box with no degreasing required.

The included DFC 5000 Advanced Brake Pads are scorched during manufacturing to remove uncured bonding agents, significantly reducing the initial break-in period. For a complete service, the kit includes high-quality hardware and premium rubber-steel-rubber shims to minimize drag and eliminate brake squeal (NVH).

• Rotor Material: G3000/G11H18 cast iron for durability and reliability.
• GeoSpec Coating: Durable silver-gray finish protects against rust and corrosion.
• Pad Construction: 100% asbestos-free, scorched for immediate stopping power.
• Included Hardware: Stainless steel abutment clips and rubber-steel-rubber shims.
• Precision Machined: Mill-balanced and 100% inspected for tightest tolerances.
• Installation: Direct bolt-on design; non-directional finish for quieter stops.

Fits select 2007-2020 Cadillac Escalade, Escalade ESV/EXT, Chevrolet Silverado 1500, Tahoe, Suburban, and GMC Sierra 1500, Yukon, and Yukon XL models.

This DFC rear brake service kit combines Geospec coated rotors with 5000 Advanced pads to restore factory braking performance while providing superior corrosion resistance. The rotors are cast from premium G3000/G11H18 iron and feature a specialized silver-gray finish that protects the hub and vanes from rust. Unlike traditional rotors, these are processed and shipped dry, allowing for immediate installation without the need to degrease with brake cleaner.

The included DFC 5000 Advanced brake pads are scorched to remove uncured bonding agents, which significantly reduces the initial break-in period and provides immediate stopping power. Each kit includes application-specific stainless steel hardware and rubber-coated abutment clips to minimize drag, prevent premature wear, and eliminate brake squeal.

• Rotors: G3000/G11H18 cast iron specification for high stability and heat dissipation.
• Corrosion Protection: Geospec coating withstands salt and moisture better than zinc or conventional paint.
• Precision Balanced: 100% electronic mill-balancing for vibration-free operation at any speed.
• Bed-In Ready: Non-directional finish ensures even pad contact and faster break-in.
• NVH Control: Premium rubber-steel-rubber shims effectively dampen noise, vibration, and harshness.
• Hardware Included: Stainless steel clips and rubber-coated abutment hardware to reduce caliper drag.
• Safety First: 100% asbestos-free formulation with scorched friction surfaces.

Fits select 2005-2020 Cadillac Escalade, Chevrolet Silverado 1500/Tahoe/Suburban, and GMC Sierra 1500/Yukon models.

This DFC Front Brake Kit provides a complete professional-grade solution for a full axle service. By combining GeoSpec Coated Rotors with 5000 Advanced Brake Pads and a complete hardware kit, this package addresses common braking issues like rust-related pulsation, excessive dust, and annoying squeal. The rotors are manufactured from premium G3000/G11H18 iron for maximum thermal stability and are 100% electronic mill-balanced to ensure vibration-free performance.

The included 5000 Advanced brake pads are scorched during manufacturing to remove uncured bonding agents, which significantly shortens the bed-in process and provides immediate stopping power. To ensure a quiet ride, DFC includes premium rubber-steel-rubber shims and stainless steel hardware to reduce drag and minimize NVH (noise, vibration, and harshness).

• Corrosion Protection: GeoSpec silver-gray coating protects non-friction surfaces from rust and eliminates the need for degreasing prior to installation.
• Precision Machined: Features a non-directional finish for faster pad bed-in and smoother engagement.
• Technical Specifications: Cast to G3000/G11H18 iron standards for high durability and OEM-level reliability.
• Advanced Friction: 100% asbestos-free scorched pads for consistent pedal feel and response.
• Included Hardware: Stainless steel abutment clips and premium shims prevent premature wear and noise.

Fits select 2010-2020 Scion, Subaru, and Toyota models including FR-S, BRZ, Forester, Impreza WRX, Legacy, Outback, and 86.

This complete front brake service kit combines DFC GeoSpec coated rotors with 5000 Advanced brake pads to restore factory-level stopping power and pedal feel. Engineered as a direct replacement for OE components, these parts ensure a precise fit without the need for modifications. The rotors are processed and shipped dry, allowing you to move straight to installation without the time-consuming process of cleaning off shipping oil.

• GeoSpec Coated Rotors: Cast from G3000/G11H18 iron for high stability and machined to tight tolerances. The silver-gray finish is a specialized paint that provides superior corrosion resistance over standard zinc coatings.
• 5000 Advanced Brake Pads: Formulated for balanced braking and ABS compatibility. Each pad is scorched during manufacturing to remove uncured bonding agents, significantly shortening the break-in period and providing immediate bite.
• Advanced NVH Control: Premium rubber-steel-rubber shims and scorched friction material work together to minimize noise, vibration, and harshness.
• Premium Hardware: Includes stainless steel hardware and rubber-coated abutment clips to reduce drag, prevent premature wear, and eliminate rattle.
• Expertly Balanced: Every vented rotor is 100% electronic mill-balanced and features a non-directional finish to ensure smooth, vibration-free stops and even pad bed-in.

Fits 2015-2021 Subaru WRX Base, Limited, and Premium models.

This DFC rear brake kit provides a complete service solution for the VA chassis WRX, combining Geospec Coated rotors with 5000 Advanced brake pads and all necessary installation hardware. Engineered to meet or exceed OE specifications, this kit addresses common issues like rotor corrosion and excessive brake noise while maintaining the balanced braking performance required for vehicles equipped with ABS and automated braking systems.

• Geospec Coated Rotors: Cast from G3000/G11H18 iron for maximum stability, these rotors feature a specialized silver-gray coating that provides superior rust protection compared to traditional zinc. The non-directional finish ensures even pad bedding, and each vented rotor is 100% electronic mill-balanced for vibration-free operation.
• 5000 Advanced Brake Pads: These asbestos-free pads are scorched to remove uncured bonding agents, increasing initial stopping power and shortening the break-in period. Premium rubber-steel-rubber shims are used to significantly reduce noise, vibration, and harshness (NVH).
• Complete Installation Kit: Includes a stainless steel hardware kit and rubber-coated abutment clips to eliminate drag, reduce heat deterioration, and prevent premature wear.
• Installation Ready: Components are processed and shipped dry, eliminating the need for degreasing or oily preparation and saving up to 2.5 hours per axle during installation.

Fits select 2008-2015 Subaru BRZ, Forester, Impreza, WRX, Legacy, and Outback models.

This DFC rear brake service kit is engineered to restore factory-level stopping power and pedal feel while providing superior protection against the elements. The GeoSpec coated rotors feature a durable silver-gray finish specifically formulated to fight rust and corrosion. Unlike standard rotors, these are processed and shipped dry, allowing for immediate installation without the need to clean messy oils or degreasers, significantly reducing shop time.

The 5000 Advanced brake pads are scorched to remove uncured bonding agents, which minimizes the traditional break-in period and ensures immediate friction performance. To ensure a quiet and smooth ride, the kit includes premium rubber-steel-rubber shims and stainless steel hardware that effectively dampens noise, vibration, and harshness (NVH) while preventing premature wear on the calipers and pads.

• Precision Construction: Rotors are cast from G3000/G11H18 iron for maximum stability and durability.
• GeoSpec Coating: Specialized silver-gray finish provides long-lasting corrosion resistance compared to zinc or conventional paint.
• Ready to Install: No pre-degreasing required; rotors feature a non-directional finish for faster pad bed-in.
• Mill-Balanced: 100% electronic mill-balancing ensures vibration-free operation at all speeds.
• Performance Pads: 100% asbestos-free formulation with scorched surfaces for instant stopping power.
• Premium Hardware: Includes stainless steel hardware and rubber-coated abutment clips to minimize drag and improve fuel efficiency.
• Warranty: 12-month manufacturer warranty against defects in material and workmanship.

Fits select 2010-2021 Ford Expedition, F-150, and Lincoln Navigator.

This DFC GeoSpec front brake kit is engineered to provide reliable stopping power and long-term durability for heavy-duty SUVs and trucks. Each kit combines GeoSpec coated rotors with premium high-friction pads to handle the increased thermal loads associated with towing, hauling, and daily commuting.

The rotors feature DFC’s GeoSpec coating, which is applied to all non-friction surfaces to prevent corrosion and rust buildup—a critical feature for maintaining wheel aesthetics and ease of future maintenance. The included heavy-duty brake pads are formulated to offer consistent pedal feel and excellent fade resistance under demanding conditions. For a complete installation, the kit includes application-specific hardware designed to restore factory-level performance.

• Includes two (2) GeoSpec coated front rotors and one set of heavy-duty front brake pads
• GeoSpec coating resists rust and corrosion on non-contact surfaces
• High-friction pad formula designed for towing and heavy vehicle weights
• Comes with all necessary installation hardware for the front axle
• Direct fit replacement for original equipment components

Fits 2001-2005 Mazda Miata (Base, LS, Mazdaspeed, SE, and Shinsen).

DFC GeoSpec Coated Brake Rotors provide reliable stopping power and enhanced durability for your Miata. These rotors are engineered as a direct replacement for factory units, featuring a specialized anti-corrosion coating on all non-friction surfaces—including the internal cooling vanes—to prevent rust and maintain a clean appearance behind your wheels.

Each rotor is precision-machined from high-quality alloys to ensure thermal stability and resistance to warping under heat. By maintaining tight tolerances and balanced construction, DFC GeoSpec rotors deliver smooth, vibration-free braking performance for daily driving and spirited use.

• Advanced GeoSpec coating protects against road salt and moisture to prevent corrosion.
• Precision-machined friction surfaces for immediate pad-to-rotor contact.
• Vented design helps dissipate heat to minimize brake fade.
• Direct fitment for front and rear axles with no modifications required.

Fits 2003-2006 Mitsubishi Lancer Evolution (Evolution, MR, RS, and SE).

Maintain consistent braking performance and a clean aesthetic with this DFC Geospec Front and Rear Brake Rotor Set. These rotors are engineered as direct replacements for the factory components on the 2003-2006 Mitsubishi Lancer Evolution (EVO VIII and IX). Each rotor is treated with DFC’s specialized GeoSpec coating, a high-temperature finish that provides superior corrosion resistance on the hub and cooling vanes to prevent the rust buildup common on uncoated rotors.

• Complete set includes both front and rear brake rotors
• GeoSpec coating resists salt and moisture to maintain a clean appearance
• Mill balanced to ensure smooth, vibration-free operation
• Precision machined to meet or exceed OE tolerances for thickness and runout
• Direct bolt-on fitment for 2003-2006 Lancer Evolution models

Fits 2005-2006 Honda CR-V (EX, LX, SE).

DFC Geospec rotors are engineered to provide consistent braking performance while resisting the environmental factors that lead to unsightly surface rust. Each rotor features a specialized protective coating formulated to withstand the elements, keeping the hub and cooling vanes clear of corrosion. This ensures the rotors remain easy to service and maintain their structural integrity throughout their service life.

These rotors are precision-machined to original equipment tolerances for a perfect fit and smooth operation. Because the Geospec coating is applied to the entire surface, they are ready to install directly out of the box without the need for degreasing or cleaning, saving significant time during a brake service. This complete set includes both front and rear rotors to fully refresh your vehicle's braking system.

• Precision-machined to OE specifications for balance and fitment
• Geospec coating provides superior corrosion resistance on non-friction surfaces
• Full set includes (2) Front and (2) Rear rotors
• Ready to install with no degreasing or prep work required

Fits 2006-2015 Honda Civic Si and 2013-2015 Acura ILX Base.

DFC Geospec brake rotors are engineered to provide reliable stopping power while maintaining a clean, rust-free appearance. These rotors feature a specialized anti-corrosive coating on all non-friction surfaces, protecting the core casting from road salt and moisture. This specialized treatment ensures that the rotors remain easy to service and visually appealing behind open-spoke wheels.

Each rotor is precision-machined to exact tolerances to match the original equipment specifications for balance and run-out. This attention to detail results in a direct-fit installation that eliminates pedal pulsation and promotes even brake pad wear across both the front and rear axles.

• Full vehicle set includes both front and rear Geospec coated rotors
• Advanced anti-corrosive coating prevents rust on hub and vanes
• Precision-balanced casting for vibration-free braking
• Direct replacement for factory components with no modifications required
• Manufactured to high thermal stability standards for consistent performance

Fits 2008-2012 Honda Accord LX, LX-P, LX-S, and SE models.

Maintain consistent braking performance and a clean, rust-free appearance with this DFC GeoSpec coated rotor set. These rotors are engineered as a direct replacement for factory units, featuring a specialized high-temperature coating that protects the hub, edges, and internal cooling vanes from corrosion. This finish not only extends the service life of the rotors in harsh environments but also ensures they remain easy to remove during future maintenance.

• Complete set includes both front and rear brake rotors.
• GeoSpec coating resists oxidation and prevents rust buildup on non-friction surfaces.
• Precision-machined for smooth, vibration-free operation and reliable pedal feel.
• Ready to install immediately with no degreasing or cleaning required.
• Specifically designed for the 2008-2012 Honda Accord submodels listed below.

Vehicle Fitment

Fits select 2013-2015 Acura ILX and Honda Civic models (Base, EX, EX-L).

DFC Geospec Brake Rotors provide a direct-replacement solution for worn factory rotors, combining reliable thermal management with superior corrosion resistance. These rotors are treated with a specialized GeoSpec coating on all non-friction surfaces, including the hub and internal vanes, to prevent rust and ensure the components remain easy to service over their lifespan. Each rotor is precision-machined to OE tolerances and double-disc ground for a consistent friction surface that reduces noise and shortens the bed-in period.

• Full set includes both front and rear brake rotors.
• GeoSpec coating resists salt and moisture to prevent oxidation.
• Double-disc ground finish ensures parallelism and quiet operation.
• Machine-balanced to eliminate pedal pulsation and vibration.
• Vented front and solid rear designs match factory equipment specifications.

Fits 2006-2015 Mazda MX-5 Miata (All submodels including Sport, Club, and Grand Touring).

Restore the braking performance and aesthetics of your MX-5 Miata with this complete set of DFC GeoSpec Brake Rotors. These rotors are engineered for drivers who require reliable stopping power without the unsightly rust common on standard cast iron components. Each rotor undergoes a specialized GeoSpec coating process, which provides a durable barrier against corrosion on the hub, edges, and internal vanes, ensuring a clean look behind your wheels.

• Complete kit includes both front and rear rotors for a full vehicle refresh.
• GeoSpec coating provides superior salt-spray resistance to prevent rust and corrosion.
• Precision-machined to OE tolerances for smooth, vibration-free braking performance.
• Double-disc ground finish ensures faster bedding-in and consistent pad-to-rotor contact.
• Vented front and solid rear designs match factory cooling specifications.
• Manufacturer Part Number: DFC GeoSpec Brake Rotors (06-15 Miata).

Fits 1994-2002 Mazda Miata (Base, LS, SE, M Edition, 10th Anniversary, and STO).

Restore your vehicle's braking performance and aesthetic with the DFC GeoSpec Series brake rotor set. Designed as a direct replacement for original equipment, these rotors cover both front and rear positions to provide consistent stopping power across the entire vehicle. Each rotor is precision-machined to ensure proper balance and fitment, eliminating the vibration and pulsation often associated with worn or warped factory components.

• Corrosion Protection: Features GeoSpec specialized coating to resist rust and environmental debris, maintaining a clean look behind your wheels.
• Precision Engineering: Machined to tight tolerances for optimal pad-to-rotor contact and reduced brake noise.
• Complete Vehicle Coverage: Includes rotors for both the front and rear axles.
• Direct Fit: Bolts directly to factory hubs without the need for modifications or specialized mounting hardware.

Fits 2016-2018 Ford Focus RS.

Restore the braking performance and appearance of your vehicle with this DFC GeoSpec Front and Rear Brake Rotor Kit. These rotors are engineered as a direct replacement for factory components, providing the consistent stopping power and thermal stability required for the Focus RS. Each rotor is precision-machined to ensure proper balance and minimal run-out, resulting in smooth, vibration-free engagement during every stop.

• GeoSpec Coating: Features a specialized protective finish on non-friction surfaces to prevent corrosion and maintain a clean look behind your wheels.
• OEM Fitment: Designed specifically for the Focus RS chassis to ensure perfect compatibility with factory calipers and pads.
• Balanced Design: Precision-cast and machined to strict tolerances for reliable performance and long-term durability.
• Comprehensive Kit: Includes both front and rear rotors for a complete brake system overhaul.

Fits select 2007-2020 Cadillac Escalade, Chevrolet Silverado 1500, Suburban, Tahoe, and GMC Sierra 1500, Yukon models.

Dynamic Friction Company (DFC) GeoSpec rotors provide a direct-fit solution for maintaining consistent braking performance and a clean aesthetic. These front and rear rotors are treated with a specialized GeoSpec coating, specifically formulated to resist corrosion and oxidation in harsh environments. This coating ensures that the non-friction surfaces remain rust-free, making them an ideal choice for vehicles with open-spoke wheels where rotor appearance is visible.

• Complete set includes front and rear brake rotors
• GeoSpec coating protects against rust and environmental corrosion
• Precision-machined surfaces for optimal pad-to-rotor contact
• Mill-balanced to ensure smooth operation and minimize vibration
• Direct OE-replacement design for straightforward installation

Fits 2018-2023 Genesis G70 and Kia Stinger (Select submodels including Base, Advanced, GT-Line, and Prestige).

This DFC GeoSpec brake rotor kit provides a comprehensive replacement for both the front and rear axles. Engineered to meet or exceed OE specifications, these rotors feature a specialized GeoSpec protective coating that resists corrosion on the hub and non-friction surfaces. This makes them an ideal choice for vehicles in regions prone to road salt or moisture, maintaining both functionality and a clean appearance behind your wheels.

• Complete kit includes both front and rear brake rotors for a full vehicle service.
• GeoSpec anti-corrosion coating prevents rust buildup and facilitates easier future removals.
• Precision machined and balanced to ensure smooth, vibration-free braking performance.
• Double-disc ground friction surface allows for faster pad bed-in and consistent pedal feel.
• Vented design provides efficient heat dissipation to prevent brake fade during heavy use.