Fits 2000-2006 BMW M3 and M5 (Base).

The DFC GeoSPEC Coated Rear Brake Rotor is engineered for high-performance stopping power and long-term durability. Each rotor is cast from premium G3000/G11H18 iron to ensure structural stability and thermal resistance. The specialized GeoSPEC coating provides superior corrosion protection over traditional zinc or painted finishes, protecting the non-friction surfaces from rust and environmental degradation.

• Ready to Install: Shipped without oil or grease; no additional pre-degreasing preparation is required, saving time during the installation process.
• Precision Balanced: 100% mill-balanced to eliminate vibration and ensure smooth stopping at any speed.
• Non-Directional Finish: Features a non-directional surface finish to promote faster pad break-in and consistent braking performance.
• OEM Standards: Engineered to meet the exact form, fit, and function of factory BMW rear brake rotors.

• Position: Rear
• Material: Premium G3000/G11H18 Iron Casting
• Finish: GeoSPEC Corrosion-Resistant Coating
• Balancing: 100% Precision Mill-Balanced

Fits select 1995-2002 BMW M3 (Base, Lightweight) and Z3 (M Coupe, M Roadster).

The DFC GeoSPEC series brake rotor is a high-performance replacement engineered to meet the exact form, fit, and function of original equipment. These rotors are manufactured using premium G3000/G11H18 iron castings for superior thermal stability and structural integrity. To ensure a smooth, vibration-free experience at any speed, every unit is 100% precision-cut and mill-balanced.

The GeoSPEC coating provides an advanced barrier against corrosion, outperforming conventional zinc or painted finishes. Additionally, these rotors feature a non-directional finish to facilitate faster pad break-in and quieter operation. Designed for efficiency, they are ready to install immediately with no pre-degreasing or cleaning required.

• Material: Premium G3000/G11H18 iron castings for maximum durability.
• Corrosion Protection: GeoSPEC coating resists rust and environmental wear.
• Balance: 100% mill-balanced for zero-vibration stopping.
• Finish: Non-directional surface finish for smoother break-in.
• Installation: Ready to install with no degreasing preparation needed.
• MPN: 604-31037D

Fits 1995-2002 BMW M3 and Z3 M (Roadster/Coupe).

The DFC GeoSPEC Coated Brake Rotor is a performance-grade replacement engineered to match original equipment form and function while providing enhanced protection against the elements. Each rotor is cast from premium G3000/G11H18 iron for maximum structural integrity and thermal stability under heavy braking. The GeoSPEC coating is applied to provide superior corrosion resistance compared to conventional painting or zinc plating, ensuring the rotor remains functional and visually clean over its service life.

• Ready to Install: Ships without the oily protective film found on standard rotors; no degreasing or prep work is required before installation.
• Precision Balanced: Mill-balanced and precision cut to eliminate vibration and ensure smooth stopping at all speeds.
• Quality Metallurgy: Constructed from G3000/G11H18 iron castings for long-lasting durability and resistance to warping.
• Non-Directional Finish: Features a cross-ground finish to promote faster brake pad bedding and consistent friction.
• Direct Fit: Engineered specifically for the Left Front position on E36 M3 and Z3 M chassis, ensuring a perfect bolt-on replacement.

Fits select 1995-2002 BMW M3 and Z3 M Coupe/Roadster models.

The DFC GeoSPEC Coated Right Rear Brake Rotor is engineered for enthusiasts and technicians who require OE-level performance with enhanced corrosion resistance. Cast from premium G3000/G11H18 iron for superior strength and thermal stability, these rotors are 100% precision cut and mill-balanced to ensure smooth, vibration-free operation at any speed. Each rotor features a specialized GeoSPEC coating that protects against salt and road grime better than conventional zinc or paint finishes, maintaining both performance and aesthetic appeal. These rotors arrive ready to install with no degreasing required, significantly reducing labor time during a brake service.

• Manufacturer Part Number: 604-31035D
• Position: Right Rear
• Material: G3000/G11H18 High-Carbon Iron Castings
• Finish: GeoSPEC Anti-Corrosive Coating with non-directional finish for faster break-in
• Balance: 100% Precision Mill-Balanced to eliminate vibration
• Installation: Ready-to-install design requires no pre-degreasing preparation

Fits select 1995-2002 BMW M3 and Z3 (M Roadster / M Coupe).

The DFC GeoSPEC Coated Brake Rotor is engineered to provide reliable stopping power and long-term durability for high-performance applications. Manufactured from premium G3000/G11H18 iron castings, these rotors offer the structural stability and strength necessary to handle the heat and stress of daily or spirited driving. The specialized GeoSPEC coating provides a superior barrier against corrosion compared to standard zinc plating or conventional painting, ensuring a clean appearance and preventing rust-seizure on the hub.

• Ready to Install: Shipped ready for immediate installation with no additional pre-degreasing preparation required, saving time and labor costs.
• Precision Balanced: 100% mill-balanced to ensure zero vibration and smooth operation at any speed.
• Advanced Metallurgy: Constructed with G3000/G11H18 iron for consistent thermal dissipation and wear resistance.
• Non-Directional Finish: Features a cross-ground finish to facilitate faster pad break-in and quieter stops.
• OEM Specification: Designed to meet exact form, fit, and function requirements for a direct-replacement installation.

Fits select 2008-2020 Subaru Impreza WRX STI and WRX models.

DFC GeoSPEC Coated Brake Rotors are engineered to provide a high-quality replacement that matches the form, fit, and function of original equipment. These rear rotors are cast from premium G3000/G11H18 iron for exceptional strength and thermal stability. To ensure a smooth, vibration-free driving experience, each rotor is 100% precision cut and mill-balanced. The specialized GeoSPEC coating provides superior corrosion protection over standard zinc or painted finishes, keeping the hub and vanes protected from the elements.

• Ready to Install: Arrives with no additional pre-degreasing preparation required, saving time and cleaning supplies during installation.
• Advanced Metallurgy: Engineered with G3000/G11H18 iron castings for long-term durability and resistance to warping.
• Precision Balanced: Mill-balanced to eliminate vibration at any speed and promote smoother stops.
• Enhanced Break-In: Features a non-directional finish to facilitate faster pad bedding and consistent friction performance.

Vehicle Fitment:

Fits select 2005-2020 Subaru Impreza WRX STI and WRX Premium.

The DFC GeoSPEC Coated Brake Rotor (Part #604-13016) is a precision-engineered braking solution designed to replace worn OE components with improved durability and corrosion resistance. Each rotor is manufactured using premium G3000/G11H18 iron castings, providing the thermal stability and strength required for performance-oriented Subaru models. The specialized GeoSPEC coating offers superior protection against rust and corrosion compared to conventional zinc or painted finishes, ensuring a clean appearance and easier maintenance.

These rotors arrive ready to install with no additional pre-degreasing required, significantly reducing installation time. To ensure a vibration-free experience, DFC rotors are 100% precision cut and mill-balanced. The non-directional finish promotes a faster break-in period and consistent stopping power right out of the box.

• Material: Premium G3000/G11H18 iron castings for maximum durability
• Corrosion Protection: GeoSPEC coating prevents rust on rotor hats and vanes
• Precision Balanced: Mill-balanced for smoother stopping and zero vibration at any speed
• Ready to Install: No degreasing needed; saves time and money during installation
• Non-Directional Finish: Encourages faster pad bedding and smoother stops
• Manufacturer Part Number: 604-13016

Fits select 2022-2025 Mercedes-Benz EQE 350, EQE 500, EQS 450, EQS 580, and Maybach EQS 680 (including SUV and AMG variants).

The DFC Hi-Carbon Alloy Rear Brake Rotor is engineered to meet the high thermal and structural demands of premium electric vehicles. Utilizing specialized G3000/G11H18 iron castings, these rotors provide superior strength, stability, and durability compared to standard cast iron. Each rotor features an Original Equipment (OE) vane configuration to maintain maximum heat dissipation and prevent brake fade during heavy use.

To ensure a smooth, vibration-free experience, these rotors are 100% precision mill-balanced. The friction surface is completed with a 16 RMS fine turned finish, facilitating faster pad break-in and consistent initial bite. For long-term protection, the entire rotor is Geomet coated, providing a high-performance barrier against corrosion without impacting braking efficiency.

• Manufacturer Part Number: 900-63199
• Material: Premium G3000/G11H18 High-Carbon Iron Castings
• Finish: Geomet Coated for maximum corrosion resistance
• Surface Finish: Fine Turned (16 RMS) for improved pad bedding
• Balance: 100% Precision Mill-Balanced
• Disc Thickness Variation (DTV): 0.010 mm Maximum
• Lateral Runout: 0.050 mm Maximum
• Design: OE-style vane configuration for optimal cooling

Fits 2014-2016 Maserati Ghibli (Base, S, and S Q4).

The DFC GeoSPEC Coated Rotor is designed as a direct replacement for OE brake rotors, engineered to match factory form, fit, and function. These rear rotors are cast from premium G3000/G11H18 iron for maximum structural integrity and thermal stability. The proprietary GeoSPEC coating provides high-level corrosion protection that outperforms standard zinc or conventional paint, ensuring a clean look and long-term durability.

• Ready to Install: Ships with the GeoSPEC coating applied, requiring no pre-degreasing or preparation before installation.
• Precision Balanced: 100% mill-balanced and precision cut to eliminate vibration and ensure smooth stopping performance at any speed.
• Non-Directional Finish: The non-directional ground finish promotes faster pad break-in and more consistent braking performance.
• Durable Construction: High-grade G3000/G11H18 iron castings provide superior strength and resistance to warping.
• Manufacturer Part Number: 604-79003

Fits 2013-2020 Hino 5 Series models.

The DFC GeoSPEC Coated Rotor (MPN 604-76147) is a professional-grade braking solution designed for heavy-duty service and long-term reliability. Each rotor is cast from premium G3000/G11H18 iron for exceptional strength and stability under high thermal loads. The GeoSPEC coating provides superior corrosion protection over conventional zinc or painted finishes, protecting the cooling vanes and non-friction surfaces from rust and environmental degradation.

These rotors arrive ready to install with no additional pre-degreasing required, significantly reducing shop time and labor costs. To ensure a vibration-free experience at any speed, every rotor is 100% precision-cut and mill-balanced. The non-directional finish promotes a faster pad break-in process and delivers smoother, more consistent stopping power.

• Precision Materials: Engineered with G3000/G11H18 iron castings for maximum durability.
• GeoSPEC Coating: High-level corrosion resistance compared to standard zinc plating.
• Mill-Balanced: 100% precision balanced to eliminate vibration and ensure smooth stops.
• Installation Efficient: Ready to install out of the box with no degreasing preparation needed.
• Non-Directional Finish: Facilitates rapid break-in and consistent friction performance.
• OE Specification: Designed to meet the exact form, fit, and function of original equipment brake rotors.

Fits 2020-2025 Audi SQ7 and SQ8 Premium Plus and Prestige models.

This DFC GeoSPEC coated brake rotor is engineered to provide reliable stopping power and superior corrosion protection for your Audi SQ7 or SQ8. Unlike standard rotors, GeoSPEC rotors are ready to install immediately out of the box with no degreasing or preparation required. Each rotor is precision-cut and mill-balanced to ensure zero vibration at any speed and features a non-directional finish to facilitate a faster break-in period.

• Left Front Position: Specifically designed for the front driver-side location.
• Premium Materials: Cast from high-quality G3000/G11H18 iron for maximum strength and thermal stability.
• GeoSPEC Coating: Provides advanced protection against rust and corrosion compared to zinc or conventional paint.
• Precision Balanced: 100% mill-balanced to eliminate pedal pulsation and promote smoother stops.
• Direct Replacement: Designed to meet OEM form, fit, and function for a seamless installation.
• MPN: 604-73094D

Fits 2020-2025 Audi SQ7 and SQ8 (Premium Plus and Prestige). This DFC GeoSPEC coated front right brake rotor (MPN: 604-73093D) is engineered to provide superior stopping power and corrosion resistance without the need for degreasing prior to installation.

Constructed from premium G3000/G11H18 iron castings, this rotor is 100% precision cut and mill-balanced to ensure smooth operation and zero vibration at any speed. The GeoSPEC coating provides significantly better corrosion protection than conventional zinc or paint, maintaining the rotor's integrity and appearance. A non-directional finish promotes a faster break-in period and quieter, more consistent stops.

• Direct replacement for OE brake rotors with matching form, fit, and function
• Premium G3000/G11H18 iron castings for maximum strength and thermal stability
• Advanced GeoSPEC coating protects against rust and salt corrosion
• Ready to install: no pre-degreasing or cleaning required
• Mill-balanced to eliminate rotational vibration
• Non-directional finish for smoother bedding and break-in

Authoritative Fitment:

• 2020-2025 Audi SQ7 (Premium Plus, Prestige)
• 2020-2025 Audi SQ8 (Premium Plus, Prestige)

Fits select 2017-2025 Audi A6 Quattro, A7 Sportback, A8 Quattro, Q7, and Q8.

The DFC GeoSPEC Coated Front Brake Rotor (604-73078) is engineered to provide reliable stopping power and long-term durability for premium European vehicles. Cast from high-grade G3000/G11H18 iron, these rotors offer the structural stability and heat management required for heavy luxury sedans and SUVs. The specialized GeoSPEC coating offers advanced corrosion protection over standard zinc or painted finishes, preventing rust from compromising the rotor's cooling vanes and hub.

Each unit is 100% precision cut and mill-balanced to ensure zero vibration and smooth operation at all speeds. Designed as a direct replacement for factory equipment, these rotors feature a non-directional finish to promote faster brake pad break-in and consistent friction. For a more efficient service, these rotors are ready to install out of the box with no degreasing or preparation required.

• Material: Premium G3000/G11H18 iron castings for maximum durability and strength.
• Finish: GeoSPEC protective coating for superior corrosion resistance and longevity.
• Installation: Pre-cleaned and ready to install; requires no additional degreasing.
• Precision: Mill-balanced and precision cut to prevent pedal pulsation and vibration.
• Performance: Non-directional finish for faster pad bedding and smoother stops.
• Part Number: 604-73078

Fits 1973-2002 Beaver Motorcoach Contessa front or rear brake applications.

The DFC GeoSPEC Coated Rotor is engineered to provide a high-performance, durable replacement for heavy-duty motorcoach braking systems. Cast from premium G3000/G11H18 iron, these rotors are built for the strength and thermal stability required for large vehicles. The GeoSPEC coating offers superior corrosion protection over standard zinc or conventional paint, ensuring the rotor maintains its integrity and appearance over time. Each unit is 100% precision cut and mill-balanced to eliminate vibration and ensure smooth stopping performance at any speed.

• Ready to Install: Arrives with no additional pre-degreasing preparation needed, saving time and labor during the installation process.
• Precision Balanced: 100% mill-balanced to guarantee zero vibration and consistent pedal feel.
• High-Quality Casting: Engineered with G3000/G11H18 iron castings for maximum durability and resistance to warping.
• Non-Directional Finish: Features a non-directional finish to promote faster brake pad break-in and smoother stops.
• OEM Fitment: Designed to match the exact form, fit, and function of original equipment brake rotors.
• Manufacturer Part Number: 604-71005

Fits 2022-2025 Rivian R1S and R1T models (Adventure, Ascend, California Dune, Explore, and Launch Edition).

DFC GeoSPEC Coated Brake Rotors are engineered for precision stopping and long-term durability on heavy-duty EV applications. These rear rotors are manufactured from premium G3000/G11H18 iron castings to ensure maximum thermal stability and structural integrity. The specialized GeoSPEC coating provides superior corrosion protection compared to conventional zinc or paint, and it arrives ready to install with no degreasing required, saving time during the brake service.

• Ready to Install: Cleaned and coated for immediate installation with no additional pre-degreasing preparation needed.
• Precision Machined: 100% mill-balanced to eliminate vibration and ensure smooth braking performance at any speed.
• Metallurgical Excellence: Engineered with G3000/G11H18 iron castings for high strength and durability.
• Non-Directional Finish: Promotes faster pad break-in and smoother stops right out of the box.
• OE-Spec Fit: Designed to match the exact form, fit, and function of the original equipment rotors.
• Manufacturer Part Number: 604-61002

Fits 1989-2022 Blue Bird All American FE buses equipped with Hydro Disc Brakes. Designed as a direct replacement for OE units, this DFC GeoSPEC Coated Brake Rotor provides a high-performance solution for heavy-duty stopping requirements.

Constructed from premium G3000/G11H18 iron castings, these rotors are engineered for maximum thermal stability and durability. Each rotor features DFC’s proprietary GeoSPEC coating, which offers superior corrosion protection compared to conventional zinc plating or paint, ensuring the cooling vanes and non-friction surfaces remain clear of rust. The non-directional finish promotes a faster break-in period and quieter operation immediately after installation.

• Ready to install: No degreasing or preparation required, allowing for immediate fitment.
• Precision balanced: 100% mill-balanced to ensure zero vibration and smooth braking at all speeds.
• High-grade casting: Uses G3000/G11H18 iron for enhanced strength and long-term service life.
• Corrosion resistant: GeoSPEC coating protects against road salts and environmental moisture.
• OEM compliance: Designed to meet the specific form, fit, and function of the original equipment.
• Manufacturer Part Number: 604-48082

Fits 2022-2024 Chevrolet LCF 4500XD Diesel models.

The DFC GeoSPEC Coated Brake Rotor is engineered for heavy-duty performance and long-term durability. These rotors are manufactured using premium G3000/G11H18 iron castings to provide the structural integrity and thermal stability required for commercial applications. Each unit is precision-cut and mill-balanced to eliminate vibration and ensure smooth, consistent stopping power at any speed.

To simplify the installation process, these rotors feature a specialized GeoSPEC coating that provides superior corrosion protection compared to conventional zinc or painted finishes. They arrive ready to install with no additional pre-degreasing or cleaning required, saving significant time in the shop. A non-directional finish is applied to the friction surface to promote a faster break-in period and reduce noise during initial operation.

• Precision Engineering: Mill-balanced for zero vibration and quiet operation.
• Premium Materials: Constructed from G3000/G11H18 iron castings for maximum durability.
• Corrosion Resistance: GeoSPEC coating protects against rust and environmental wear.
• Installation Ready: No degreasing needed; matches OEM form, fit, and function.
• Fast Break-In: Non-directional finish ensures immediate pad-to-rotor contact.
• Part Number: 604-37012

Fits select 2016-2026 BMW (230i, 330i, 430i, 530i, 740i, i4, iX, X3, X5, Z4) and Toyota GR Supra models.

The DFC GeoSPEC Coated Rear Brake Rotor is engineered to provide reliable stopping power and exceptional durability. Using premium G3000/G11H18 iron castings, these rotors ensure the strength and stability required for high-performance braking systems. Each rotor features a specialized GeoSPEC coating that offers superior corrosion protection compared to conventional zinc or paint finishes, preventing rust buildup on the hub and vanes.

Designed for a direct factory replacement, these rotors meet exact OEM specifications for form, fit, and function. They arrive ready to install with no additional degreasing or preparation required, significantly reducing installation time. Each unit is 100% precision cut and mill-balanced to eliminate vibration and ensure a smooth, quiet ride at any speed.

• Material: Premium G3000/G11H18 iron castings for maximum durability
• Finish: GeoSPEC corrosion-resistant coating with a non-directional friction surface
• Installation: Ready to install; no degreasing or pre-cleaning needed
• Precision: Mill-balanced for zero-vibration performance
• MPN: 604-31130

Fits 2018-2023 Tesla Model 3 Performance.

The DFC GeoSPEC Coated Front Rotor (604-26004) is a professional-grade braking solution engineered to match the exact form, fit, and function of your vehicle's original equipment. These rotors are manufactured from premium G3000/G11H18 iron castings for maximum thermal stability and structural integrity. The specialized GeoSPEC coating provides a high level of corrosion protection across the entire rotor surface, ensuring durability in harsh environments while maintaining a clean look behind the wheels.

• No Degreasing Needed: Ready to install right out of the box with no additional pre-cleaning or degreasing required, saving time on the lift.
• Precision Mill-Balanced: 100% precision cut and mill-balanced to eliminate rotor-induced vibration and ensure smooth, quiet stopping at any speed.
• Non-Directional Finish: Features a non-directional ground finish to promote faster brake pad break-in and consistent friction performance.
• Premium Casting: Utilizes high-quality G3000/G11H18 iron for long-lasting performance and resistance to warping under heat.
• Manufacturer Part Number: 604-26004

Fits select 1990-2003 Ford Escort, Mazda Miata, MX-3, Protege, and Mercury Tracer.

The DFC GeoSPEC Coated Rear Brake Rotor (604-54003) provides a professional-grade braking solution designed to eliminate the time-consuming preparation required by traditional rotors. These units arrive ready to install with no degreasing or cleaning needed, thanks to a specialized GeoSPEC coating that protects against corrosion and oxidation far better than conventional zinc or paint finishes.

Engineered from premium G3000/G11H18 iron castings, these rotors offer the structural integrity and thermal stability necessary for long-term durability. Each rotor is 100% precision-cut and mill-balanced to ensure smooth, vibration-free stopping at any speed. A non-directional finish is applied to promote a faster break-in period and consistent pad seating.

• GeoSPEC Coating: Provides superior protection against rust and moisture compared to zinc plating.
• Ready to Install: No additional pre-degreasing required, saving time and money during installation.
• Premium Castings: Constructed from G3000/G11H18 iron for maximum strength and stability.
• Mill-Balanced: Precision balancing ensures zero vibration and smoother deceleration.
• OE Specifications: Designed to meet the exact form, fit, and function of your vehicle's factory rotors.
• Manufacturer Part Number: 604-54003

Fits select 2022-2026 BMW 430i Gran Coupe, 530i, i4, and X3 models.

The DFC GeoSpec Coated Rear Brake Rotor (604-31202) is engineered to meet the exact form, fit, and function of OEM components. Cast from premium G3000/G11H18 iron, these rotors offer the structural stability and heat dissipation required for consistent braking under load. The specialized GeoSpec coating provides superior corrosion protection over traditional zinc or paint, keeping the rotor hat and vanes clean and rust-free.

Designed for professional-grade service, these rotors are 100% precision-cut and mill-balanced to eliminate pedal pulsation and ensure smooth, vibration-free stopping. They arrive ready to install with no additional pre-degreasing required, saving time on the lift. A non-directional finish is applied to the friction surface to promote a faster break-in period and immediate pad-to-rotor contact.

• Manufacturer Part Number: 604-31202
• Material: Premium G3000/G11H18 iron castings for durability and strength
• Coating: GeoSpec anti-corrosive finish for long-lasting protection
• Balancing: 100% mill-balanced for vibration-free performance
• Surface: Non-directional finish for improved pad bedding
• Installation: Pre-cleaned and ready to install out of the box

Fits 2018-2024 Subaru WRX and WRX STI models.

The Power Stop Evolution Coated brake rotor (JBR1794EVC) provides a direct-fit, bolt-on replacement for your factory rear rotors. Designed to combat the rust and corrosion that plague non-coated rotors, these units are treated with a genuine GEOMET 360 coating. This specialized thin-layer coating protects the entire rotor surface, including the cooling vanes, without impacting the vehicle's stopping performance or braking feel.

Each rotor is manufactured to strict tolerances for disc thickness variation (DTV) and runout to ensure smooth, quiet operation. To maintain original braking characteristics, Power Stop matches the factory weight and internal vane count, while every unit is 100% dynamic mill balanced for vibration-free performance.

• Anti-Corrosion Finish: Fully treated with Genuine GEOMET 360 rust preventative for long-lasting protection.
• OE Specifications: Matches factory weight, dimensions, and vane count for consistent thermal management.
• Smooth Performance: 100% dynamic mill balanced to eliminate vibration and ensure quiet braking.
• No Modifications Needed: Direct bolt-on design fits original equipment housing with no modifications required.
• Manufacturer Part Number: JBR1794EVC

Fits select 2018-2024 Subaru WRX and WRX STI.

Power Stop Evolution Coated rotors provide a direct bolt-on replacement for factory equipment, engineered to maintain original braking performance while offering superior protection against the elements. Each rotor (JBR1793EVC) is fully treated with a genuine GEOMET 360 coating. This thin-layer rust preventative protects the entire rotor surface, including internal cooling vanes, against corrosion without influencing the vehicle's stopping power.

Manufactured to strict original equipment specifications for weight and vane count, these rotors ensure proper thermal management and fitment. Every rotor is 100% dynamic mill balanced and machined to tight tolerances for Disc Thickness Variation (DTV) and runout, resulting in smooth, quiet operation and consistent pedal feel.

• Genuine GEOMET 360 coating for optimum anti-corrosion protection
• Direct original equipment fit and function with no modifications necessary
• Weight and vane count matched to OE design for reliable performance
• 100% dynamic mill balanced to ensure vibration-free operation
• Strict tolerances for DTV and runout provide smooth, quiet braking
• Manufacturer Part Number: JBR1793EVC

Fits 2016-2025 Mazda MX-5 Miata (Club / RF Club) and 2017-2020 Fiat 124 Spider Abarth. Engineered as a high-performance upgrade over standard iron, this DFC Hi-Carbon Alloy front rotor provides superior thermal stability and durability for spirited driving.

This rotor is cast from premium G3000/G11H18 iron, using an increased carbon content to better manage heat and minimize the risk of thermal cracking. To ensure long-lasting performance and aesthetics, the rotor is fully Geomet coated to resist corrosion in the vanes and on the hub. Each unit is 100% precision mill-balanced to eliminate vibration at all speeds, while the 16 RMS fine-turned finish ensures a smooth, quiet break-in period between the pad and rotor surface.

• Manufacturer Part Number: 900-80073
• Position: Front
• Material: G3000/G11H18 High-Carbon Iron Alloy
• Coating: Geomet Corrosion Protection
• Vane Configuration: Original Equipment (OE) Spec
• Surface Finish: Fine Turned (16 RMS)
• Disc Thickness Variation (DTV): 0.010 mm Maximum
• Lateral Runout: 0.050 mm Maximum

Fits 2016-2025 Mazda MX-5 Miata and 2017-2020 Fiat 124 Spider.

Dynamic Friction Company (DFC) Hi-Carbon Alloy brake rotors are engineered for drivers who demand superior thermal stability and long-term durability. These rear rotors are cast from premium G3000/G11H18 metallurgy, increasing the carbon content to better handle the heat cycles of spirited driving while minimizing the risk of warping or cracking. Each rotor features a Geomet coating, providing a high-performance barrier against corrosion on all non-friction surfaces.

To ensure a smooth, vibration-free pedal feel, every rotor is 100% precision mill-balanced and machined to strict tolerances. The fine-turned 16 RMS finish facilitates a faster break-in period between the pad and rotor, while the original equipment (OE) vane configuration maintains proper airflow for maximum heat dissipation.

• Manufacturer Part Number: 900-80072
• Material: High-carbon G3000/G11H18 iron castings for enhanced stability
• Finish: Geomet coated for superior rust and corrosion protection
• Machining: Fine turned (16 RMS) for improved initial pad bite
• Precision: Mill-balanced for zero vibration at all speeds
• Disc Thickness Variation (DTV): 0.010 mm maximum
• Lateral Runout: 0.050 mm maximum
• Design: Replaces factory rear rotors with OE-spec vane configuration

Fits select 2006-2025 Audi A3, Q3, TT and Volkswagen Beetle, CC, Eos, Golf Alltrack, GTI, Jetta, Passat, Taos, and Tiguan (2.0T).

DFC Hi-Carbon Alloy Geomet Coated Brake Rotors are engineered with premium G3000/G11H18 iron castings for maximum strength and thermal stability. These rotors are designed to replace worn factory components, offering superior durability and heat management through an original equipment (OE) vane configuration. The specialized Geomet coating provides high-performance corrosion protection on all non-friction surfaces, ensuring the rotor maintains its integrity and appearance over time.

• Manufactured from high-carbon alloy for enhanced heat dissipation and resistance to thermal cracking
• 100% precision mill-balanced to eliminate vibration and ensure smooth stopping at any speed
• Fine turned finish (16 RMS) for improved initial pad break-in and seating
• High-carbon metallurgy reduces brake squeal and improves overall damping characteristics
• Disc Thickness Variation (DTV) maintained at 0.010 mm maximum
• Lateral Runout maintained at 0.050 mm maximum
• Manufacturer Part Number: 900-74053

Fits select 2014-2025 Audi A3, Q3, S3, TTS and Volkswagen Arteon, CC, Golf R, GTI, Jetta, and Tiguan.

This DFC Hi-Carbon Alloy Geomet Coated Front Brake Rotor is engineered for drivers demanding superior thermal stability and performance. Utilizing specialized G3000/G11H18 iron castings, these rotors feature a higher carbon content to better handle the extreme heat generated during heavy braking, reducing the risk of warping and brake fade. The OE vane configuration ensures maximum airflow and heat dissipation, keeping your braking system within optimal temperature ranges.

Each rotor is 100% precision mill-balanced to eliminate vibration and provide smooth stopping at all speeds. The Geomet coating provides an additional layer of high-performance protection against corrosion, maintaining the rotor's integrity and appearance behind your wheels. Finished with a fine-turned 16 RMS surface, these rotors facilitate a proper pad-to-rotor break-in for consistent friction levels from the first stop.

• Manufacturer Part Number: 900-74034
• Material: Premium G3000/G11H18 High-Carbon Iron Castings
• Coating: Geomet corrosion protection
• Surface Finish: Fine Turned (16 RMS)
• Disc Thickness Variation (DTV): 0.010 mm maximum
• Lateral Runout: 0.050 mm maximum
• Balancing: 100% Precision Mill-Balanced

Fits select 2006-2026 Audi A3, Q3, RS3, S3, TT and Volkswagen Arteon, Atlas, CC, Golf R, GTI, and Passat.

The DFC Hi-Carbon Alloy Geomet Coated Rear Brake Rotor is engineered for drivers demanding superior thermal stability and long-term durability. Constructed from premium G3000/G11H18 high-carbon iron castings, these rotors are designed to handle the increased heat loads of modern braking systems while minimizing noise and vibration. The specialized high-carbon alloy composition provides better heat dissipation and damping characteristics compared to standard rotors.

Each rotor features a Geomet coating to provide exceptional corrosion resistance, ensuring the hub and vanes remain protected in harsh environments. To ensure a smooth, vibration-free experience, every unit is 100% precision mill-balanced and finished with a 16 RMS fine-turned surface to optimize initial pad break-in. This rotor maintains strict tolerances for thickness variation and lateral runout, providing a high-performance alternative to OE components.

• Castings: Premium G3000/G11H18 high-carbon iron for maximum stability
• Coating: Geomet finish for high-performance corrosion protection
• Surface Finish: Fine-turned 16 RMS finish for improved pad bedding
• Vane Configuration: Original Equipment (OE) style for optimal cooling
• Balance: 100% precision mill-balanced to eliminate vibration
• Maximum Disc Thickness Variation (DTV): 0.010 mm
• Maximum Lateral Runout: 0.050 mm
• Manufacturer Part Number: 900-74030

Fits select 2016-2025 Audi Q3, TT Quattro, and Volkswagen Jetta and Tiguan.

This DFC Hi-Carbon Alloy Rear Brake Rotor is engineered for drivers who demand consistent thermal stability and long-term durability. Utilizing premium G3000/G11H18 iron castings, these rotors are designed to withstand high-stress braking environments without warping or excessive wear. The high-carbon content improves heat dissipation and reduces brake noise, making it an ideal replacement for worn factory units. Each rotor is 100% precision mill-balanced to eliminate vibration and ensure a smooth, confident stop at any speed.

To combat road salt and environmental moisture, the rotor is fully treated with a Geomet coating, providing superior corrosion protection for both the internal vanes and external surfaces. The fine-turned 16 RMS finish ensures optimal pad-to-rotor contact right out of the box, facilitating a proper break-in period and immediate stopping power.

• Original Equipment (OE) vane configuration ensures maximum heat dissipation and cooling efficiency.
• Advanced high-carbon metallurgy offers increased resistance to thermal cracking.
• Precision-ground finish minimizes brake squeal and pedal pulsation.
• Geomet coating maintains a clean appearance and prevents rust-related seizing.

• Manufacturer Part Number: 900-73082
• Material: High-Carbon G3000/G11H18 Iron Casting
• Finish: Geomet Coated / 16 RMS Fine Turned
• Max Disc Thickness Variation (DTV): 0.010 mm
• Max Lateral Runout: 0.050 mm
• Placement: Rear

Fits select 2008-2025 Audi (A4, A5, A6, A7, A8, Q5, S4, S5, SQ5) and 2015-2025 Porsche Macan.

This DFC high-carbon alloy brake rotor is engineered for superior thermal stability and durability. Cast from premium G3000/G11H18 iron, it features a higher carbon content than standard rotors to better handle heat dissipation and reduce brake squeal. Each rotor is 100% precision mill-balanced to eliminate vibration and features a fine-turned 16 RMS finish to ensure a smooth pad break-in process. To combat the elements, the entire surface is treated with a Geomet coating for long-lasting corrosion protection without sacrificing braking performance.

• Manufacturer Part Number: 900-73066
• Material: High-carbon G3000/G11H18 iron castings for maximum strength
• Finish: Geomet coated for high-performance corrosion resistance
• OE-spec vane configuration for optimal heat dissipation
• Precision mill-balanced for zero-vibration stopping
• Disc Thickness Variation (DTV): 0.010 mm maximum
• Lateral Runout: 0.050 mm maximum
• Fine turned finish (16 RMS) for improved rotor-to-pad contact