The aFe Pro DRY S air filter used by the Takeda performance air intake system uses a 3-layer synthetic media that requires no oils. This filter is 99.2 efficient filtering out all of the most harmful air contaminants while allowing maximum flow. This filter requires no oils and cleans with soap and water for maximum convenience.

• Cleans In A Matter Of Minutes
• Pro DRY S Filter Media
• No Oil Required

Enhance your engine's performance with our bolt-on aFe POWER Pulley kit. By changing the pulley diameter, you can adjust the spin rate of the supercharger, resulting in increased boost and amplified power. The aFe POWER Pulley kits are meticulously crafted to achieve a perfect equilibrium of lightweight design and high strength through precision machining. Count on our pulley kits for optimal functionality, a flawless fit, and an impeccable finish, ensuring a seamless boost to your engine's power. Pulleys crafted from high-quality 6061-T6 billet aluminum showcase exceptional characteristics. Through precision machining, these pulleys achieve a remarkable balance of light weight and high strength, ensuring not only optimal functionality but also a perfect fit and finish. Our pulley kits featuring a 17-4 stainless steel hub, combining corrosion resistance and high strength through precision machining, ensuring a perfect fit, impeccable finish, and optimal functionality. Please note that special tools are required for removing the factory pulley from the supercharger snout, and we recommend professional installation for the kit to ensure seamless performance.

• Boost increase by approximately 1.5PSI ±.5
• Includes Screws, Washers & Thread locker
• CNC Machined 17-4 Stainless Steel Hub
• CNC Machined 6061-T6 Aluminum Pulley
• Pulley Size: Ø78.75mm (3.10")
• Laser Etched Logo and Sizing
• Black Hard Anodized Finish
• Smaller Belt Not Required
• Tuning is Recommended

This Part Fits:

Upgrade your vehicle’s ignition system with aFe POWER SCORCHER High-Performance Ignition Coils – a premium direct replacement for your factory coils. Our high-performance coils have a lower primary resistance than factory units, resulting in a high energy spark that ensures complete combustion from idle to redline. Experience up to 20% more spark energy compared to your factory coils. SCORCHER Ignition Coils keep the pace with the demands of higher RPM ranges and at wide-open throttle, always ensuring your ignition system is performing at its best.

• Improved Drivability & Smoother Idle
• Increase Horsepower & Torque
• Up to 20% More Spark Energy
• Premium Direct Replacement
• Easier Cold Starts
• Longer Coil Life

This Part Fits:

Upgrade your vehicle’s ignition system with aFe POWER SCORCHER High-Performance Ignition Coils – a premium direct replacement for your factory coils. Our high-performance coils have a lower primary resistance than factory units, resulting in a high energy spark that ensures complete combustion from idle to redline. Experience up to 20% more spark energy compared to your factory coils. SCORCHER Ignition Coils keep the pace with the demands of higher RPM ranges and at wide-open throttle, always ensuring your ignition system is performing at its best.

• Improved Drivability & Smoother Idle
• Increase Horsepower & Torque
• Up to 20% More Spark Energy
• Premium Direct Replacement
• Easier Cold Starts
• Longer Coil Life

This Part Fits:

Upgrade your vehicle’s ignition system with aFe POWER SCORCHER High-Performance Ignition Coils – a premium direct replacement for your factory coils. Our high-performance coils have a lower primary resistance than factory units, resulting in a high energy spark that ensures complete combustion from idle to redline. Experience up to 20% more spark energy compared to your factory coils. SCORCHER Ignition Coils keep the pace with the demands of higher RPM ranges and at wide-open throttle, always ensuring your ignition system is performing at its best.

• Quantity: 1 – Please order the quantity needed for your engine configuration
• Improved Drivability & Smoother Idle
• Increase Horsepower & Torque
• Up to 20% More Spark Energy
• Premium Direct Replacement
• Easier Cold Starts
• Longer Coil Life

This Part Fits:

A simple 10 minute install will give you an increase in power. The aFe POWER SCORCHER GT Module includes a high quality case & wire harness with factory style connectors for an easy plug & play installation. The case is equipped with an ON/OFF button and a blue L.E.D. light to indicate when the module is powered up. This performance module connects to and alters Mass Air Flow (MAF) sensor signal. It improves vehicle performance and throttle response. This quick and easy plug & play SCORCHER GT module adds horsepower and torque by altering MAF sensor signal to increase performance and improve vehicle efficiency and throttle response. aFe SCORCHER GT modules uses high quality aluminum extrusion black powder-coated enclosure casing and factory style connectors which requires no modification to your factory harness. These factory style connectors plug directly into the stock wiring harness connectors and sensors. This module comes with a built-in blue L.E.D. light to show the module is powered up and functioning correctly. It can be turned on and off easily thanks to the button on the case. The blue L.E.D. light will be on when the module is powered up. SCORCHER GT modules are 100% tested for proper protection. These modules work amazingly on stock vehicles and are optimized for maximum performance with use of aFe POWER performance products. This SCORCHER GT Module will work with aFe POWER Momentum GT Cold Air Intake System, Magnum FLOW OE Replacement Air Filter, and the Silver Bullet Throttle Body Spacer. aFe POWER does not recommend using this device in conjunction with any other tuners or power modules.

• Alters MAF signal to improve vehicle performance, efficiency and throttle response
• Quick and easy plug & play installation without any modifications
• High quality case & wire harness w/ OEM style connectors
• High reliability, 100% of units tested
• Works with aFe POWER air intake system
• Leaves no trace on ECU (No Footprint)
• Around 10 minute installation
• ON/OFF button on the case

This Part Fits:

A simple 30 minute install will give you a huge increase in power. The aFe POWER SCORCHER GT Module includes a high quality case & wire harness with factory style connectors for an easy plug & play installation. A LED light switch provides In-Cabin On-The-Fly power adjustments. The 4-Power settings are adjustable with one button and the LED light represent the settings: Stock (Green), Sport (Yellow), Sport+ (Orange) and Race (Red) . This performance module increases turbo boost, thus Improving vehicle performance and throttle response. This quick and easy plug & play SCORCHER GT module adds significant power by altering pressure sensor signals to increase turbo boost to improve vehicle efficiency, power and throttle response. SCORCHER GT modules features In-Cabin On-the-Fly power adjustment to accommodate any situation. This adjustment is controlled by via LED light switch with a button that can be easily mounted in any location in the cabin. aFe SCORCHER GT modules uses high quality aluminum extrusion black powder-coated enclosure casing and factory style connectors which requires no modification to your factory harness. These factory style connectors, plugs directly into the stock wiring harness connectors and sensors. SCORCHER GT modules are 100% tested for proper protection. These modules work amazingly on stock vehicles and are optimized for maximum performance with use of aFe POWER performance products.

• 4-power position settings: Stock (Green), Sport (Yellow), Sport+ (Orange) and Race (Red)
• Increase turbo boost to improve vehicle performance, efficiency and throttle response
• Quick and easy plug & play installation without any modifications
• In-Cabin On-the-Fly Power Adjustments via LED light switch
• High quality case & wire harness w/ OEM style connectors
• Compatible with other aFe POWER performance products
• High reliability, 100% of units tested
• Leaves no trace on ECU (No Footprint)
• Around 30 minute installation

This Part Fits:

A simple 30 minute install will give you a huge increase in power. The aFe POWER SCORCHER GT Module includes a high quality case & wire harness with factory style connectors for an easy plug & play installation. A LED light switch provides In-Cabin On-The-Fly power adjustments. The 4-Power settings are adjustable with one button and the LED light represent the settings: Stock (Green), Sport (Yellow), Sport+ (Orange) and Race (Red) . This performance module increases turbo boost, thus Improving vehicle performance and throttle response. This quick and easy plug & play SCORCHER GT module adds significant power by altering pressure sensor signals to increase turbo boost to improve vehicle efficiency, power and throttle response. SCORCHER GT modules features In-Cabin On-the-Fly power adjustment to accommodate any situation. This adjustment is controlled by via LED light switch with a button that can be easily mounted in any location in the cabin. aFe SCORCHER GT modules uses high quality aluminum extrusion black powder-coated enclosure casing and factory style connectors which requires no modification to your factory harness. These factory style connectors, plugs directly into the stock wiring harness connectors and sensors. SCORCHER GT modules are 100% tested for proper protection. These modules work amazingly on stock vehicles and are optimized for maximum performance with use of aFe POWER performance products. aFe POWER does not recommend to use with any other tuners or modules. aFe POWER recommends to use the SCORCHER GT module in Sport or Sport+ settings during towing.

• 4-power position settings: Stock (Green), Sport (Yellow), Sport+ (Orange) and Race (Red)
• Increase turbo boost to improve vehicle performance, efficiency and throttle response
• Quick and easy plug & play installation without any modifications
• In-Cabin On-the-Fly Power Adjustments via LED light switch
• High quality case & wire harness w/ OEM style connectors
• Compatible with other aFe POWER performance products
• High reliability, 100% of units tested
• Leaves no trace on ECU (No Footprint)
• Around 30 minute installation

This Part Fits:

Automobiles in the 21st century have replaced the more conventional throttle cable technology for an ECM (Electronic Control Module) that translates pedal travel into electronic signals in order to provide power to the wheels. The ETC system (Electronic Throttle Control), also known as drive-by-wire, has the unfortunate downside of delayed throttle response and subdued acceleration, creating problems in certain circumstances such as up-hill starts, quick gear changes, overtaking, etc. The Sprint Booster aims to overcome this throttle response delay for ETC-equipped vehicles, providing crisp on-tap acceleration at the driver's disposal.

• Does Not Affect The Vehicles Electronic System
• Reduces Throttle Response Time
• Three Position Settings
• Improves Acceleration
• Easy To Install

This Part Fits:

With five layers of progressively finer mesh cotton gauze media and two layers of synthetic media and a 100% polyurethane top and base, this high flow "oiled" conical performance filter provides excellent airflow for maximum horsepower and torque. Washable and reusable for multiple cleanings, the tall, open, evenly spaced pleats provide excellent dust holding capacity for longer service cycles between cleanings. The pliable polyurethane flange with integrated bumps insures a tight, no leak seal over the life of the filter.

• Top And Base Made From 100% 55-Shore A Polyurethane
• 5 Layer Cotton Gauze 2 Layers Synthetic
• Washes Clean w/Soap And Water
• Limited Lifetime Warranty
• Washable And Reusable
• 50 State Legal

This Part Fits:

aFe CONTROL wheel spacers are a great way to improve the aesthetics, functionality, and wheel fitment of your vehicle. By effectively lowering the offset of your factory or aftermarket wheels, our spacers allow you to dial in a more aggressive fitment and provide clearance for other components such as brakes and suspension. The resulting increase in track width also improves handling and stability. All our spacers are designed in-house and machined to strict tolerances to ensure a perfect fit and long-lasting durability. Our hub-centric spacer design allows the wheels to be centered with the hub allowing for wheel loads to be transferred to the hub for a stronger platform and eliminating any chance of vibration. Spacers can sometimes stick to the factory hubs due to corrosion, debris, and heat buildup. This can make it difficult if you ever need to remove the spacer. The added pry pockets provide a space to safely pry your spacers off and avoid damage to your hub and spacer.

• Requires longer wheel bolts or studs (Not Included)
• CNC Machined 6061-T6 Aluminum
• Laser Etched Logo and Sizing
• Black Anodized Finish
• Bolt Pattern: 5x120
• Center Bore: 72.6
• Thickness: 12.5mm
• Sold as a Pair

This Part Fits:

This 6” tall 360-degree radial flow air filter features a 3.5" flange and our oil-free Pro DRY S media with three layers of synthetic media for maximum convenience. Its progressive layering provides great filtration efficiency and dust holding capacity, while not requiring the use of oils. Its inverted top makes for more filter surface area, resulting in longer service intervals. This media is best suited for street use. The smooth one-piece sealed housing, constructed of heat-resistant cross-linked polyethylene (XLPE) polymer, features our patent-pending filter-to-housing interface. Its innovative design minimizes the total number of parts, making for an easy installation. A large, clear sight window allows for hassle-free filter inspection, without having to disassemble your system. This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat soak resistant and extremely durable. Stainless-steel clamps are included for strength, and a silicone bellows coupling allows for ample flexibility. This is a direct bolt-on kit that requires no cutting or drilling on OEM parts.

• Durable XLPE Construction and Sealed Housing Protects From Impact, Extreme Temperatures, and Other Elements
• Premium Stainless Steel Clamps and a Bellows Coupling Provide a Secure Seal
• Clear Sight Window for Convenient Filter Inspection Without Disassembly
• Utilizes Factory Mounting Locations for an Easy and Secure Installation
• Incorporates the Factory Air Inlet Scoop with No Additional Hardware
• Washable and Reusable Pro DRY S Air Filter for Maximum Convenience
• Dyno-Proven Gains up to +7 HP and +6 Lbs. x Ft. TQ
• Measured Flow: 250 CFM @ 7" H2O
• Outflows Factory Intake by 67%

This Part Fits:

Large Five Layer Performance Air Filter:Momentum’s innovative filter-to-housing interface was built to feature the largest air filter possible. This 9" tall 360-degree radial flow air filter features our pre-oiled Pro 5R media with five layers of progressively finer cotton gauze media for maximum performance. It provides your engine with the largest amount of high-flowing air and delivers the highest power gains in most cases. This media is perfect for street use. Its inverted top makes for more filter surface area, resulting in longer service intervals.

• Durable XLPE Construction and Sealed Housing Protects From Impact, Extreme Temperatures, and Other Elements
• Clear Sight Window for Convenient Filter Inspection Without Disassembly
• Washable and Reusable Pro 5R Air Filter for Maximum Performance
• Optional Auxiliary Air Inlet for Maximum Air Flow
• Premium Hardware Provides a Secure Seal

This Part Fits:

Large Three Layer Performance Air Filter: This 360-degree radial flow air filter features a 3-1/4" x 6-1/2" flange and our oil-free Pro DRY S media with three layers of synthetic media for maximum convenience. Its progressive layering provides great filtration efficiency and dust holding capacity, while not requiring the use of oils. This media is best suited for street and light off-road use.Unique Sealed Housing: The one-piece sealed housing, constructed of XLPE (cross-linked polyethylene) polymer, is used to minimize the number of components and ensure the coolest air intake charge available.Dyno-Tuned Intake Tube: This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat soak resistant and extremely durable.Hassle-Free Installation: This is a direct fit intake system that utilizes factory mounting points and requires no cutting or modifications. All necessary clamps and hardware are included. Its revolutionary design uses half the number of parts of a traditional cold air intake system.

• Oversized, Heat-Resistant Sealed Housing Gathers Larger Amounts of Cool Air
• Washable and Reusable Pro DRY S Air Filter
• Measured Flow: 345 CFM @ 7 IN H2O
• Outflows Factory Intake by 13%
• +42 lbs. x ft. TQ & +21 HP

This Part Fits:

Sealed, molded plastic or aluminum cover provides factory style with less intake noise than open systems. Our specially engineered air box openings pull cold air from outside the engine compartment increasing engine efficiency and producing greater performance gain. The cross-linked polypropylene rotomolded plastic air box replaces restrictive stock air box and ensures a consistent supply of cold fresh air; built-in ram scoop forces cold, outside air to filter. Precision designed molded plastic intake tube maximizes airflow volume and speed for optimum power gains. 360 degree flow, washable and reusable, limited lifetime filters are high flow and high performance.

• Repl. Factory Intake For Improved HP/Torque/Styling
• Rotomolded Plastic Tube For Maximum Air Flow
• Uses Pro 5R Filter For Maximum Air Flow
• Improved Throttle Response
• 2 Year Limited Warranty
• 69% cfm Flow Gain

This Part Fits:

Unique One-Piece Housing: The smooth one-piece sealed housing with auxiliary air scoop is used to eliminate the use of multiple-piece housings and ensure the coolest air intake charge available. A urethane plug is also included for those cold weather applications where you want to block the auxiliary air scoop. A large, clear sight window is used for a hassle-free filter inspection and an aggressive style. (US PAT 9440175) For Filter-to-Housing Interface. Roto-mold Tube: This System uses a two piece CAD designed, dyno-tuned, roto-mold intake tube to achieve maximum power gains while maintaining a perfect fit. Huge 5-Layer Performance Air Filter: The Momentum GT is designed around a pre-oiled, large 8" Tall round inverted top 360 degree radial flow performance air filter with 5-layers of progressive finer mesh cotton media providing maximum airflow and performance. The unique air filter to housing interface (patent pending) allows for maximum filter size which increases the available air volume while simplifying the installation process. Premium Hardware: Premium stainless steel T-bolt clamps and a urethane hump coupler are used for strength and durability while also providing the most secure installation available. Momentum GT intakes are designed with fewer parts for a quick and simple installation.

• Pro DRY S Oil-Free 3 Layer Progressively Finer Synthetic Media
• Built In Sight Window Provides Easy Inspection Of Filter
• Unique Filter-To-Housing Interface For Easy Servicing
• 1-Piece Sealed Housing w/Auxiliary Air Scoop
• Outflows Factory Intake By Up To 36%
• CAD-Designed Roto-Molded Intake Tube

This Part Fits:

The Dynamic Air Scoop (D.A.S.) from aFe is a very simple snap-in product that increases airflow and velocity into the Momentum GT air intake system from the front of the vehicle. This scoop is constructed of high quality plastic for greater strength and unique styling. This scoop is a perfect upgrade to the Momentum GT cold air intake system (P/N: 51-76108 & 54-76108). Lower Intake Air Temperature Dynamic Air scoops lower intake air temperatures by forcing more cool air from the front of the vehicle into the air intake auxiliary scoop. High Quality D.A.S Scoop: This Dynamic Air Scoop is constructed with high quality plastic for greater strength and unique styling. Hassle Free Installation: All necessary hardware is included for an easy, hassle free installation. No cutting or drilling required.

• This item will only fit Momentum Intake Systems 51-76108 or 54-76108
• Directs Forward Pressurized Air Into Intake System
• CAD-Designed Roto-Molded Dynamic Air Scoop
• No Cutting Or Drilling Required
• Direct Snap-In Installation
• Maximum Performance

This Part Fits:

Bringing you the next generation of intakes, the Momentum GT sealed air intake system is designed using the most up-to-date engineering tools and techniques to provide you with the perfect blend of power and protection. This intake system is superior in every way. From the one-piece sealed housing with a tire tread top, to the massive air filter and premium hardware, we spared no expense to give you the best intake on the market.

• Pro 5R Oiled 5 Layer Progressively Finer Mesh Cotton Gauze Filter
• Built In Sight Window Provides Easy Inspection Of Filter
• Unique Filter-To-Housing Interface For Easy Installation
• High Quality 1-Pc. Roto-Molded Sealed Housing
• Outflows Factory Intake By Up To 39%
• CAD Designed Roto-Molded Intake Tube
• No Cutting Or Drilling
• Faster Installation

This Part Fits:

Unique One-Piece High Quality Housing W/ Sight Window: A custom CAD designed roto-molded housing made from heat soak resistant material eliminates the use of multiple components and ensures the coolest air intake charge available. A large clear sight window allows for filter inspection without removal of the air box. The roto-molded housing is made out of black cross-linked polyethylene. A urethane plug is also included if you wish to block off the auxiliary air inlet. High Quality Tube: This system uses a high quality plastic CAD designed, dyno-tuned, roto-molded designed intake tube to fit with the stock mechanical fan and achieve maximum power gains while maintaining a perfect fit. Large 3-Layer Performance Air Filter: This Momentum GT intake system was designed around the largest filter possible to allow maximum performance and filtration. This cone filter has a massive oval flange and is 9" tall with an inverted top. The Pro DRY S performance air filter features 3-layers of progressive finer porosity synthetic media providing maximum convenience with 100% polyurethane frame for long life and multiple cleaning cycles. Premium Hardware: High quality premium clamps ensures the most secure installation available. Momentum intakes are designed with fewer parts for a quick and simple installation.

• 5 Layer Progressively Finer Mesh Cotton Gauze Oiled Media Filter
• High Quality One-Piece Sealed Housing w/Auxiliary Air Inlet
• No Cutting Or Drilling On Factory Parts For Faster Install
• Unique Filter-To-Housing Interface For Easy Installation
• Outflows Factory Intake By Up To 30%
• CAD Designed Roto-Molded Intake Tube
• 30% Flow Increase

This Part Fits:

Bringing you the next generation of intakes, the Momentum GT sealed air intake system is designed using the most up-to-date engineering tools and techniques to provide you with the perfect blend of power and protection. This intake system is superior in every way. From the one-piece sealed housing with a tire tread top, to the massive air filter and premium hardware, we spared no expense to give you the best intake on the market.

• Unique Housing To Filter Interface-Patent Pending
• Huge 5 in. Flange w/Inverted Top Air Filter
• 5-Layer Progressive Cotton Gauze Media
• Auxiliary Air Scoop w/Urethane Plug
• Stainless Steel T-Bolts Clamps
• Hassle Free Installation
• 2 Year Limited Warranty
• Washable And Reusable
• Pro 5R Filter Media
• Rotomolded Tube

This Part Fits:

Advanced Flow Engineering, Inc. (aFe) produces high flow, high performance air filters & intake systems for the automotive industry. Founded in April, 1999, aFe was created to address an obvious need in the automotive aftermarket industry: a lack of choice for a high performance aftermarket air filter. We are a team of engineers, machinists, production and sales people who believe in the product we design. We each have years of experience in our respective positions and together work to ensure that we have the best product on the market. Our purpose was not just to be another vendor that offers air filters, we chose to pay attention to those finer details that set an aFe filter apart from the competition. We currently offer aftermarket air filters for passenger cars, light trucks and SUVs. We also have many applications for round racing and universal clamp-on filters. To find your particular application, please use our new search engines. If you do not see your particular application listed, please contact us.

• 5 Layer Performance Air Filter
• Premium Hardware
• 1-Piece Housing

This Part Fits:

Lower Intake Air Temperatures: This Dynamic Air Scoop takes advantage of the Challenger™s factory Air Catcher headlight inlet by guiding cool ambient air from outside the vehicle directly into your intake system. The cool dense air allows your vehicle to run more efficiently, increasing performance.Durable XLPE Construction: This D.A.S. is constructed from high-quality cross-linked polyethylene (XLPE) that is heat soak resistant and extremely durable. Its Red color adds a colorful accent.Hassle-Free Installation: Inspired by the Challenger SRT Hellcat, this Dynamic Air Scoop works with both factory (requires Hellcat factory airbox) and aFe POWER Momentum GT intake systems (P/N: 51/54-72201, 51/54-72202 and 51/54-72203). This part easily snaps into the air box and requires no modification to your vehicle.Fitment Note: This item will not fit models equipped with R/T SCAT PACK or Rhombi Illuminated air catcher headlamp. See 50-70009S for those models.Emissions Disclaimer: This product does not require a CARB EO#.

• Reduces air temperature flowing into your intake system
• Perfect upgrade for your Momentum GT intake system
• Improves performance and throttle response
• CAD Designed for the perfect fit

This Part Fits:

This massive 18” tall 360-degree radial flow air filter features our pre-oiled Pro 5R media with five layers of progressively finer cotton gauze media for maximum performance. It provides your engine with the largest amount of high-flowing air and delivers the highest power gains in most cases. This media is perfect for street and/or track use. This air filter is surrounded by expanded metal that provides additional protection, preventing filter collapse and direct impact. The included massive air filter is surrounded by an open-element XLPE (cross-linked polyethylene) polymer housing that minimizes warm engine air for maximum performance. Its open design allows for easy viewing of the air filter and delivers an aggressive Air Intake sound. The housing incorporates both the factory hood air inlet scoop and the grille inlet using no additional hardware. This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Our XLPE material is heat soak resistant and extremely durable. The computer designed system utilizes factory mounting locations, minimizing the use of unnecessary hardware, and ensuring a perfect fit every time. Its innovative design makes for a hassle-free, direct bolt-on installation process that requires no cutting or drilling. Stainless-steel T-bolt clamps are included for strength, and a premium silicone coupling allows for ample flexibility and durability. Momentum GT intakes are designed with fewer parts for a fast and easy installation.

• Open Element Housing Incorporates Factory Hood Inlet Scoop and Grille Air Inlet for Maximum Cold Air
• Open-Element Design Showcases the Air Filter and Delivers an Aggressive Air Intake Sound
• Innovative Filter-to-Housing Interface for Easy Installation (Roughly 60 Minutes)
• Premium Stainless-Steel Clamps and Silicone Couplings Provide a Secure Seal
• Utilizes Factory Mounting Locations for an Easy and Secure Installation
• Washable and Reusable Pro 5R Air Filter for Maximum Performance

This Part Fits:

Lower Intake Air Temperatures: These Dynamic Air Scoops lower air intake temperatures by forcing more cool air from behind the front grilles into the factory intake tracts. Durable LLDPE Construction: They are constructed from high-quality linear low-density polyethylene (LLDPE) that is impact resistant, extremely durable, and 100% recyclable. Their red color adds a colorful accent visible behind the vehicle's kidney grilles. Hassle-Free Installation: These air scoops are installed through the front kidney grille openings and are secured to the reinforcement support bar with the included plastic push-in rivets. They sit right in front of the radiator and are designed to fit with the factory radiator. No modifications are required for installation with factory and aFe POWER intake systems.

• Reduces air temperature flowing into your intake system
• Works with factory and aFe POWER intake systems
• Improves performance and throttle response
• CAD Designed for the perfect fit

This Part Fits:

Easy to install one piece 16-gauge powder-coated heat shield requires no cutting or drilling. Stylish powder-coated steel or brushed aluminum cover blocks heat and directs cold air to the filter while quieting intake noise. The precision designed molded plastic intake tube maximizes airflow volume and speed for optimum power gains. 360 degree flow, washable and reusable, limited lifetime filters are high flow and high performance.

• Repl. Factory Intake For Improved HP/Torque/Styling
• Rotomolded Plastic Tube For Maximum Air Flow
• Uses Pro 5R Filter For Maximum Air Flow
• Improved Throttle Response
• 2 Year Limited Warranty
• 35% cfm Flow Gain

This Part Fits:

Quantum Cold Air Intake Systems (Patent Pending) by aFe POWER are the latest in airflow technology for your Ford Power Stroke 6.7L (td) truck. From the uniquely integrated Filter-to-Housing design to the state of the art, lightweight injection molded base and top Pro 5R filter, Quantum delivers dyno-proven performance gains, convenience, value and installs in minutes.

• Filter Base Has Built-In 3-Angle Velocity Stack For Even Airflow
• CAD Designed XLPE Roto-Molded Intake Tube For Optium Airflow
• Unique Filter To Housing Interface For Easy Installation
• Quality Stainless Steel Clamps For A Secure Install
• Intake Tube Heat Soak Resistant and Durable
• Washable And Reusable Air Filter
• Silicone Bellows Coupling
• Outflows Factory Intake

This Part Fits:

This Momentum intake system was designed around the largest filter possible to allow maximum performance and filtration. This cone filter has a massive (6.75" x 4.75") oval flange and is 8-1/2" tall. The system comes with both a Pro DRY S and Pro 5R performance air filter. The simple yet elegant design of the one-piece sealed housing makes installation a snap and features our (Patent Pending) filter-to-housing interface. A large clear sight window allows for filter inspection without removal of the airbox. The housing is made out of lightweight high gloss, clear-coated plain weave carbon fiber and mounts directly into the factory headlamp cold air inlet location on the driver side to capture the coolest air available from the factory intake tract. Momentum intakes are designed with fewer parts for a quick and simple installation.

• No Cutting Or Drilling On Factory Parts For Faster Installation
• Includes Both Pro DRY S Oil-Free And Pro 5R Oiled Filters
• Built In Sight Window Provides Easy Inspection Of Filter
• Clear-Coated Carbon Fiber Housing And Tube
• Incorporates Factory Headlamp Air Inlet
• +37 HP / +33 ft./lbs. Torque Max Gains
• Unique Air Filter To Housing Interface
• Outflows Factory Intake By 13%
• Washable And Reusable
• No Tuning Required

This Part Fits:

This 5-3/4” tall 360-degree radial flow air filter features a 5-1/2" flange and our oil-free Pro DRY S media with three layers of synthetic media for maximum convenience. Its progressive layering provides great filtration efficiency and dust holding capacity, while not requiring the use of oils. This media is best suited for street use. Its inverted top makes for more filter surface area, resulting in longer service intervals. aFe POWER developed this heat shield to snap onto the top of the lower half of the factory air box to provide a hassle-free installation utilizing factory mounting locations. This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its XLPE (cross-linked polyethylene) material is heat soak resistant and extremely durable. The computer designed system utilizes factory mounting locations, minimizing the use of unnecessary hardware, and ensuring a perfect fit every time. This is a direct bolt-on kit that requires no cutting or drilling on factory parts. Stainless-steel clamps are included for strength, and premium silicone couplings allow for ample flexibility. This air intake system works perfectly in combination with aFe POWER D.A.S. (Dynamic Air Scoop): 52-10010S(Black), 52-10010SR(Red) and 52-10010SL(Blue).

• Powder-Coated One-Piece Heat Shield Mounts to Lower Half of Factory Airbox for Easy Installation
• Premium Stainless-Steel Clamps and a Silicone Coupling are used for Strength and Durability
• Washable and Reusable Pro DRY S Air Filter for Maximum Convenience
• No Cutting or Drilling on OEM Parts for Faster Installation
• Computer-Designed Roto-Molded Intake Tube

This Part Fits:

A custom CAD designed roto-molded housing made from heat soak resistant material eliminates the use of multiple components and ensures the coolest air intake charge available. A large clear sight window allows for filter inspection without removal of the airbox. The roto-molded housing is made out of black cross-linked polyethylene. A urethane plug is also included if you wish to completely seal the airbox. (US PAT 9440175) For Filter-to-Housing Interface. This system uses a high quality plastic CAD designed, dyno-tuned, roto-molded intake tube to achieve maximum power gains while maintaining a perfect fit. This Momentum GT intake system was designed around the largest filter possible to allow maximum performance and filtration. This cone filter has a large (7" x 4-3/4") oval flange and is 8" tall with an inverted top. The Pro DRY S performance air filter features 3-layers of progressive finer porosity synthetic media providing maximum convenience with 100% polyurethane frame for long life and multiple cleaning cycles. Premium stainless steel clamps and a silicone coupling are used for strength and durability while also providing the most secure installation available. Momentum GT intakes are designed with fewer parts for a quick and simple installation.

• No Cutting Or Drilling On Factory Parts For Faster Installation
• Built-In Sight Window Provides Easy Inspection Of Filter
• High Quality 1-Piece Sealed Housing w/Aux. Air Inlet
• CAD Designed Roto-Molded Intake Tube
• 3 Layer Synthetic Oil-Free Media
• Outflows Factory Intake

This Part Fits:

Bringing you the next generation of intakes, the Momentum HD sealed air intake system is designed using the most up-to-date engineering tools and techniques to provide you with the perfect blend of power and protection. This intake system is superior in every way. From the one-piece sealed housing with a built-in clear sight window to the massive 1,000cfm air filter and premium hardware, we spared no expense to give you the best intake on the market.

• 1000 cfm Performance 360 deg. Radial Flow Air Filter
• Unique Housing To Filter Interface-Patent Pending
• 10 Layer Progressive Cotton Gauze Oiled Media
• Huge 6 in. Flange w/Inverted Top Air Filter
• Auxiliary Air Scoop w/Urethane Plug
• Washable And Reusable Air Filter
• Stainless Steel T-Bolts Clamps
• Reinforced Silicone Coupler
• Built In Sight Window

This Part Fits: