Bringing you the next generation of intakes, the Momentum HD sealed air intake system is designed using the most up-to-date engineering tools and techniques to provide you with the perfect blend of power and protection. This intake system is superior in every way. From the one-piece sealed housing with a built-in clear sight window to the massive 1,000cfm air filter and premium hardware, we spared no expense to give you the best intake on the market.

• 1000 cfm Performance 360 deg. Radial Flow Air Filter
• Wrapped In Reinforce Metal For Maximum Strength
• 10 Layer Progressive Cotton Gauze Oiled Media
• Unique Air Filter To Housing Interface
• Allows For Maximum Filter Size
• Increases Available Air Volume
• Easy Installation

This Part Fits:

The new 6.7L turbo diesel Cummins engine demands maximum airflow—and aFe POWER delivers. The Momentum Sealed Intake eliminates hidden restrictions to unleash your engine’s full potential. It delivers more engine protection, while precision-molded tubing provides smooth, efficient airflow straight to the turbocharger for peak performance. Pro 10R Air Filter uses ten layers of cotton gauze treated with oil. The sticky surface traps fine dust and debris while allowing plenty of air to pass through. Servicing is easy:  just wash, dry, re-oil and reinstall. A clear sight window lets you check filter condition at a glance, eliminating the need for disassembly during routine maintenance, while the sealed airbox features our innovative filter-to-housing interface for a secure, precise fit. The dyno-tuned intake tube is engineered to optimize airflow and maximize power and torque based on real-world testing. Made from heat-resistant and durable XLPE material, it guarantees a precise fit. Premium stainless-steel clamps are included for strength, while the silicone coupler allow for ample flexibility.

• Product covered by one or more of the following patents: 9440175, 10252202, 10532304, 11219850, 11331607, 11376536, 11135538, 11745129
• The sealed housing blocks engine heat, dirt, and contaminants out, delivering cooler, denser air for peak performance.
• The rotomolded housing with a clear sight window and tube deliver exceptional strength and rigidity.
• Pro 10R Air Filter Media: Oiled, washable, reusable, and built for performance.
• Premium stainless-steel clamps for a secure seal.
• Custom-made silicone coupler for durability.

This Part Fits:

The new 6.7L turbo diesel Cummins engine demands maximum airflow—and aFe POWER delivers. The Momentum Sealed Intake eliminates hidden restrictions to unleash your engine’s full potential. It delivers more engine protection, while precision-molded tubing provides smooth, efficient airflow straight to the turbocharger for peak performance. Pro Dry S Air Filter captures dirt without oil. It  uses three layers of dense synthetic fibers to trap particles. It makes cleaning and maintaining your filter convenient. A clear sight window lets you check filter condition at a glance, eliminating the need for disassembly during routine maintenance, while the sealed airbox features our innovative filter-to-housing interface for a secure, precise fit. The dyno-tuned intake tube is engineered to optimize airflow and maximize power and torque based on real-world testing. Made from heat-resistant and durable XLPE material, it guarantees a precise fit. Premium stainless-steel clamps are included for strength, while the silicone coupler allow for ample flexibility.

• Product covered by one or more of the following patents: 9440175, 10252202, 10532304, 11219850, 11331607, 11376536, 11135538, 11745129
• The sealed housing blocks engine heat, dirt, and contaminants out, delivering cooler, denser air for peak performance.
• The rotomolded housing with a clear sight window and tube deliver exceptional strength and rigidity.
• Pro DRY S Air Filter Media: Washable, reusable, and built for convenience.
• Premium stainless-steel clamps for a secure seal.
• Custom-made silicone coupler for durability.

This Part Fits:

Momentum’s innovative filter-to-housing interface was built to feature the largest air filter possible. This 7.5” tall 360-degree radial flow air filter features a 4" flange and our pre-oiled Pro 5R media with five layers of progressively finer cotton gauze for maximum performance. It provides your engine with the largest amount of high-flowing air and delivers the highest power gains in most cases. This media is perfect for street and/or track use. Its inverted top adds more surface area, resulting in longer service intervals. The sealed heat-resistant housing, constructed of cross-linked polyethylene (XLPE), features our patent-pending filter-to-housing interface and a clear sight window for hassle-free filter inspection. An aluminum heat shield panel deflects hot air from the turbocharger, ensuring the system’s two air inlets bring in the coolest air possible. This intake also uses the vehicle’s OE air inlet without requiring additional hardware. This system uses a flexible silicone intake tube reinforced with three layers of nylon, making it highly resistant to wear and deterioration. An aluminum insert inside the tube ensures a secure fit to the air filter. Stainless-steel clamps and a silicone coupler are included for strength and durability. Momentum GT’s innovative design reduces the number of components for a fast and easy installation.

• Durable XLPE Construction and Sealed Housing Protects From Impact, Extreme Temperatures, and Other Elements
• Clear Sight Window for Convenient Filter Inspection Without Disassembly
• Utilizes Factory Mounting Locations for an Easy and Secure Installation
• Stainless Steel Clamps and a Silicone Coupling Provide a Secure Seal
• Washable and Reusable Pro 5R Air Filter for Maximum Performance
• Innovative Filter-to-Housing Interface for Easy Installation

This Part Fits:

Ready to take control of your vehicle by removing drive-by-wire throttle lag and air restrictions to your engine? You will love the feeling of waking your vehicle up, giving you the visceral performance feeling when you need it most. Get instant throttle response and acceleration and more HP with the combination of the Momentum GT Air Intake and the Pedal 2 Metal Throttle Enhancer in one easy package. Simple installation for immediate results. With the Bluetooth app, you can dial in your throttle response to match your driving style for ultimate customization. Plus utilize the valet mode to limit acceleration or even kill the throttle all together, securing your vehicle from unauthorized use. End your transmissions RPM hunting and reclaim the performance you're missing. This is the package for the enthusiast looking to unlock the true spirt from your vehicle. Add performance and safety with the aFe Power Package. See what you've been missing with the Stage 3 Package. What’s in the box? Momentum GT Cold Air Intake System w/ Pro 5R Filter: Washable and Reusable Pro 5R Air Filter for Maximum Performance. For more information on the Momentum GT Cold Air Intake: 50-70113R Pedal 2 Metal Throttle Enhancer: Improve throttle response and drivability with the Pedal 2 Metal Throttle Enhancer. Installs in Minutes with 5 Driving Modes w/ 20 Adjustable Sensitivity Settings via Bluetooth App.

• Two of our most popular first modifications in one convenient package. Cold Air Intake + Throttle Enhancer
• Washable and Reusable Pro 5R Air Filter for Maximum Performance
• Pedal 2 Metal throttle enhancer

This Part Fits:

This 360-degree radial flow air filter features our pre-oiled Pro 5R media with five layers of progressively finer cotton gauze media for maximum performance. Our Pro 5R media provides your engine with the largest amount of high-flowing air, usually resulting in the highest power gains out of all our filter media options. This media is perfect for street and/or track use. Its inverted top makes for more filter surface area, resulting in longer service intervals. The smooth one-piece sealed housing, constructed of heat-resistant cross-linked polyethylene (XLPE), features our patented pending filter-to-housing interface. Its innovative design minimizes the total number of parts, making for an easy installation. A large, clear sight window allows for hassle-free filter inspection, without having to disassemble your system. This system features high quality, computer-designed, dyno-tuned intake tubes to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat soak resistant and extremely durable. Stainless-steel clamps are included for strength, and a premium silicone coupling allows for ample flexibility. Momentum GT intakes are designed with fewer parts for a fast and easy installation

• Clear Sight Window for Convenient Filter Inspection Without Disassembly
• Utilizes Factory Mounting Locations for an Easy and Secure Installation
• Washable and Reusable Pro 5R Air Filter for Maximum Performance
• Innovative Filter-to-Housing Interface for Easy Installation
• Premium Clamps and Silicone Coupling Provide a Secure Seal

This Part Fits:

Large Five Layer Performance Air Filter:Momentum’s innovative filter-to-housing interface was built to feature the largest air filter possible. This 8” tall 360-degree radial flow air filter features our pre-oiled Pro 5R media with five layers of progressively finer cotton gauze media for maximum performance. It provides your engine with the largest amount of high-flowing air and delivers the highest power gains in most cases. This media is perfect for street and/or track use. Its inverted top makes for more filter surface area, resulting in longer service intervals.Unique One-Piece Housing:The smooth one-piece sealed housing, constructed of heat-resistant cross-linked polyethylene (XLPE), features our patented (US PAT 9440175) filter-to-housing interface. Its innovative design minimizes the total number of parts, making for an easy installation. A large, clear sight window allows for hassle-free filter inspection, without having to disassemble your system. Its auxiliary air inlet can be used to bring in additional air, or can be closed with an included plug.Dyno-Tuned Intake Tube:This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat soak resistant and extremely durable. A built-in resonance chamber catches unwanted air intake noises on 2010+ models.Premium Components:Momentum GT intakes are designed with fewer parts for a fast and easy installation. This is a direct fit intake system that utilizes factory mounting points and requires no cutting or modifications. Stainless-steel T-bolt clamps are included for strength, and a premium bellows coupling allows for ample flexibility.

• Built-In Sight Window Provides Easy Inspection of Filter Without Disassembly
• High Quality One-Piece Roto-Molded Sealed Housing with Auxiliary Air Inlet
• Washable and Reusable Pro DRY S Air Filter for Maximum Convenience
• Unique Patented Filter-to-Housing Interface for Easy Installation
• No Cutting or Drilling on Factory Parts for Faster Installation
• Performance Gains Shown for 2010-2022 Models

This Part Fits:

This 360-degree radial flow air filter features our oil-free Pro DRY S media with three layers of synthetic media for maximum convenience. Its progressive layering provides great filtration efficiency and dust holding capacity, while not requiring the use of oils. This media is best suited for street and light off-road use. Its inverted top makes for more filter surface area, resulting in longer service intervals. The smooth one-piece sealed housing, constructed of heat-resistant cross-linked polyethylene (XLPE), features our patented pending filter-to-housing interface. Its innovative design minimizes the total number of parts, making for an easy installation. A large, clear sight window allows for hassle-free filter inspection, without having to disassemble your system. The housing incorporates the factory air inlet scoop. This system features high quality, computer-designed, dyno-tuned intake tubes to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat soak resistant and extremely durable. Stainless-steel clamps are included for strength, and premium silicone couplings allows for ample flexibility. Momentum GT intakes are designed with fewer parts for a fast and easy installation.

• Clear Sight Window for Convenient Filter Inspection Without Disassembly
• Utilizes Factory Mounting Locations for an Easy and Secure Installation
• Washable and Reusable Pro DRY S Air Filter for Maximum Convenience
• Innovative Filter-to-Housing Interface for Easy Installation
• Premium Clamps and Silicone Couplings Provide a Secure Seal

This Part Fits:

Momentum’s unique filter-to-housing interface was built to feature the largest air filter possible. This 9” tall, pre-oiled 360-degree radial flow air filter features our pre-oiled Pro 5R media with five layers of progressively finer cotton gauze media for maximum performance and filtration. Its inverted top and large surface area provide much longer life between maintenance intervals. This media is perfect for street use. The smooth one-piece sealed housing, constructed of heat-resistant cross-linked polyethylene (XLPE), features our patent-pending filter-to-housing interface. Its innovative design minimizes the total number of parts, making for an easy installation. A large, clear sight window allows for hassle-free filter inspection, without having to disassemble your system. The housing incorporates the factory air inlet scoop. A silicone seal piece finishes the inlet of the housing and seals to the hood to block off unwanted hot engine air from entering the air intake system. This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat soak resistant and extremely durable. Stainless-steel clamps are included for strength, and premium silicone couplings allows for ample flexibility. Momentum GT intakes are designed with fewer parts for a fast and easy installation.

• Premium Clamps and Silicone Couplings Provide a Secure Seal and Excellent Durability
• Large Clear Sight Window for Convenient Filter Inspection Without Disassembly
• Sealed Housing Incorporates Factory Hood Inlet Scoop and Grille Air Inlet
• Washable and Reusable Pro 5R Air Filter for Maximum Performance
• Innovative Filter-to-Housing Interface for Easy Installation
• Measured Flow: 780 CFM @ 7" H20
• Outflows Factory Intake by 58%

This Part Fits:

This 6-1/2” tall 360-degree radial flow air filter features a 3-1/2” round flange and our oil-free Pro DRY S media with three layers of synthetic media for maximum convenience. Its progressive layering provides great filtration efficiency and dust holding capacity, while not requiring the use of oils. This media is best suited for street and light off-road use. The smooth one-piece sealed housing, constructed of heat-resistant XLPE (cross-linked polyethylene) polymer, features our patent-pending filter-to-housing interface. A large, clear sight window allows for hassle-free filter inspection, without having to disassemble your system. This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat-soak resistant and extremely durable. This intake is designed to use factory mounting locations, minimizing the use of unnecessary hardware, ensuring a perfect fit every time. Its revolutionary design, featuring our patent pending filter-to-housing interface uses half the number of parts of a traditional cold air intake system. Stainless-steel worm clamps are included for strength, and a premium bellows coupling allows for ample flexibility.

• Innovative Filter-to-Housing Interface and Minimal Hardware for Fast & Easy Installation
• Clear Sight Window for Convenient Filter Inspection Without Disassembly
• Utilizes Factory Mounting Locations for an Easy and Secure Installation
• Washable and Reusable Pro DRY S Air Filter for Maximum Convenience
• Fits With Factory Strut Bar

This Part Fits:

Momentum’s unique filter-to-housing interface was built to feature the largest air filter possible. This 8” tall, pre-oiled 360-degree radial flow air filter features a 4” round flange and our pre-oiled Pro 10R media with ten layers of progressively finer cotton gauze media for maximum performance and filtration. Its inverted top and large surface area provide much longer life between maintenance intervals, while reinforced metal provides maximum strength to prevent filter collapse. This media is best suited for off-road applications. The smooth one-piece sealed housing, constructed of heat-resistant cross-linked polyethylene (XLPE), features our patented pending filter-to-housing interface. Its innovative design minimizes the total number of parts, making for an easy installation. A large, clear sight window allows for hassle-free filter inspection, without having to disassemble your system. The soft EPDM hood seal is included to keep out hot engine air and create a perfect seal to the hood. This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat soak resistant and extremely durable. Momentum HD intakes are designed with fewer parts for a fast and easy installation. This is a direct fit intake system that utilizes factory mounting points and requires no cutting or modifications. All necessary clamps, couplings, and hardware are included.

• Washable and Reusable Pro 10R Air Filter for Maximum Dust Holding Capacity and Longevity
• Built-In Sight Window Provides Easy Inspection of Filter Without Disassembly
• Unique Filter-to-Housing Interface for Easy Installation (Patent Pending)
• No Cutting or Drilling on Factory Parts for Faster Installation
• Integrated Soft Hood Seal to Block Out Hot Engine Air
• High Quality One-Piece Roto-Molded Sealed Housing
• CAD-Designed Roto-Molded Intake Tube
• Outflows factory intake by 23%

This Part Fits:

Large Ten Layer Performance Air Filter:Momentum’s unique filter-to-housing interface was built to feature the largest air filter possible. This 9” tall, pre-oiled 360-degree radial flow air filter features a 5-1/2” flange and our pre-oiled Pro 10R media with ten layers of progressively finer cotton gauze media for maximum performance and filtration. Its inverted top and large surface area provide much longer life between maintenance intervals, while reinforced metal provides maximum strength to prevent filter collapse. This media is best suited for off-road applications.Unique One-Piece Housing:The smooth one-piece sealed housing, constructed of heat-resistant cross-linked polyethylene (XLPE), features our patented (US PAT 9440175) filter-to-housing interface. Its innovative design minimizes the total number of parts, making for an easy installation. A large, clear sight window allows for hassle-free filter inspection, without having to disassemble your system. The housing connect to the factory air inlet scoop, using no additional hardware, and features an optional auxiliary air inlet that pulls in additional air. A plug is provided to close the auxiliary opening.Dyno-Tuned Intake Tube:This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat soak resistant and extremely durable.Premium Components:Stainless-steel T-bolt clamps are included for strength, and a premium bellows silicone coupling allows for ample flexibility. Momentum HD intakes are designed with fewer parts for a fast and easy installation.

• Innovative Filter-to-Housing Interface (US PAT 9440175) and Minimal Hardware for Fast and Easy Installation (Roughly 30 Minutes)
• Washable and Reusable Pro 10R Air Filter for Maximum Dust Holding Capacity and Longevity
• Sealed Housing Utilizes Factory Air Inlet Scoop and Auxiliary Air Inlet
• Clear Sight Window for Convenient Filter Inspection Without Disassembly
• Premium T-Bolt Clamps and a Bellows Coupling Provide a Secure Seal

This Part Fits:

Large Five Layer Performance Air Filter:Momentum’s innovative filter-to-housing interface was built to feature the largest air filter possible. This 8” tall 360-degree radial flow air filter features a 5" flange and our pre-oiled Pro 5R media with five layers of progressively finer cotton gauze media for maximum performance. Our Pro 5R media provides your engine with the largest amount of high-flowing air, usually resulting in the highest power gains out of all our filter media options. This media is perfect for street and/or track use. Its inverted top makes for more filter surface area, resulting in longer service intervals.Unique One-Piece Housing:The one-piece sealed housing, constructed of heat-resistant cross-linked polyethylene (XLPE), draws styling cues from the Mustang's body. It incorporates the OE air inlet with no additional hardware and features an auxiliary air inlet that captures additional air from the inner fender. Its patented filter-to-housing interface design minimizes the total number of parts, making for an easy installation. A large, clear sight window allows for hassle-free filter inspection, without having to disassemble your system.Dyno-Tuned Intake Tube:This system features a high quality, computer-designed, dyno-tuned intake tube to achieve maximum power gains while maintaining a perfect fit. Its XLPE material is heat soak resistant and extremely durable.Premium Components:Momentum GT intakes are designed with fewer parts for a fast and easy installation. This is a direct fit intake system that utilizes factory mounting points and requires no cutting or modifications. Premium T-bolt clamps, couplings, and all other hardware is included.

• With style cues pulled from the Mustang's body and an integrated design that directly mates to the EcoBoost motor, this intake looks like it belongs under your hood.
• Innovative Filter-to-Housing Interface and Minimal Hardware for Fast and Easy Installation
• Durable One-Piece XLPE Housing Captures Air Directly from the Front of the Vehicle
• Clear Sight Window for Convenient Filter Inspection Without Disassembly
• Washable and Reusable Pro 5R Air Filter for Maximum Performance

This Part Fits:

One-Piece Housing with Sight Window:A custom computer designed housing eliminates the use of multiple components. It’s roto-molded and made from heat soak resistant cross-linked polyethylene, ensuring the coolest air intake charge possible. A clear sight window allows for filter inspection without removal of the airbox. The housing is designed to retain the same stock mounting points as the OE intake system for a hassle-free installation.Dual Inlet Large 3-Layer Performance Air Filter:This sealed intake system utilizes a radial flow performance air filter with three oil-free progressive synthetic media layers for maximum convenience. The unique filter-to-housing interface allows for maximum filter size which increases the available air volume while simplifying the installation process.Dual 3" Mandrel-Bent Tubes w/ Custom Silicone Coupling:Dual mandrel-bent wrinkle-black powder-coated aluminum intake tubes direct unrestricted airflow from the filter to the throttle body for more horsepower and torque. A custom reinforced silicone coupling merges the dual tubes into a single outlet to connect to the throttle body.Premium Hardware:Premium stainless-steel worm-gear clamps provide the best corrosion resistance possible. Momentum XP intakes are designed with fewer parts for a quick and simple installation.

• Get a custom look under the hood with this Momentum XP Cold Air Intake System. With stealthy dual wrinkle-black aluminum intake tubes and a custom dual inlet air filter, this thing is sure to turn heads.
• One-Piece Roto-Molded Housing Captures Air Directly from the Front of the Truck
• Enjoy Lifelong Convenience with a Washable and Reusable Pro DRY S Air Filter
• Clear Sight Window Provides Easy Filter Inspection Without Disassembly
• Unique Filter-to-Housing Interface for an Easy Installation

This Part Fits:

3" 409 Stainless Steel Construction: This muffler delete pipe is constructed from 3" mandrel-bent 409 stainless steel tubing for maximum strength and durability.Installation: Utilizing factory style flange and hangers this system is a direct bolt-on system, which requires no cutting or modifications for a hassle-free installation.Computer-Aided Design: Utilizing factory style flange and hangers this system is a direct bolt-on system, some cutting is required.MIG Welded: 100% MIG welded for race-proven strength and durability.Fitment Note: Will fit both the factory single and the factory dual exhausts.Emissions Disclaimer: This product does not require a CARB EO#.aFe POWER exhaust systems are engineered and manufactured in our Corona, California facility.

• Constructed from 3 IN Mandrel-Bent 409 Stainless Steel Tubing
• Utilizes Factory Style Flange and Hangers for a Secure Fit
• Hardware is Included for a Hassle-Free Installation
• Replaces Factory Muffler, for an Aggressive Sound
• 100% MIG Welded for Strength and Durability

This Part Fits:

This DPF-back exhaust system is constructed of 4" mandrel-bent 409 stainless steel tubing for maximum strength and durability. Finishing off this exhaust system are dual 5" diameter polished 304 stainless steel intercooled clamp-on exhaust tips. The tips features an aFe POWER logo plate riveted on for a unique style. Some cutting may be required, see instruction sheet for further information. Utilizing factory style hangers this system mounts directly to factory mounting locations for a hassle-free installation. A mitered merge collector is used to decrease turbulence and increase exhaust velocity resulting in increased horsepower, torque and improved throttle response. Utilizing state-of-the-art computer-aided design technology, this exhaust system is designed for custom, high tolerance factory fitment. 100% MIG-Welded for race-proven strength and durability. This system fits: Double Cab / Short-Bed - 149.4" Wheelbase, Crew Cab / Short-Bed - 158.9" Wheelbase, Double Cab / Long-Bed - 162.4" Wheelbase, Crew Cab / Long-Bed - 172" Wheelbase

• Dual 5" Diameter Polished 304 stainless steel Intercooled Clamp-On Exhaust Tips
• All Necessary Hardware is Included for a Hassle-Free Installation
• Constructed from 4" Mandrel-Bent 409 Stainless Steel Tubing
• Utilizes Factory Style Hangers for a Secure Fit
• 100% MIG-Welded for Strength and Durability

This Part Fits:

Large Bore-HD 5 IN 409 Stainless Steel DPF-Back Exhaust System w/Polished Tip RAM Diesel Trucks 19-26 L6-6.7L (td)

• All Necessary Hardware is Included for a Hassle-Free Installation
• Constructed from 5 IN Mandrel-Bent 409 Stainless Steel Tubing
• 7 IN Diameter Stainless Steel Clamp-On Exhaust Tip
• Utilizes Factory Style Hangers for a Secure Fit
• 100% MIG-Welded for Strength and Durability

This Part Fits:

This Takeda "muffler-delete" axle-back exhaust system eliminates the OE restrictive muffler and delivers a deepened exhaust tone while increasing performance.

• Oversize Mandrel-Bent Stainless Steel Tubing for Maximum Flow
• Reduces Substancial Weight Over Factory System
• 100% MIG Welded for Strength and Durability
• Delivers an Aggressive Exhaust Tone

This Part Fits:

This DPF-back exhaust system is constructed of 3 IN mandrel-bent 304 stainless steel tubing for maximum strength and durability. Finishing off this exhaust system is a 4 IN diameter black 304 stainless steel clamp-on exhaust tip. The tip features a laser etched aFe POWER logo for a unique style. This DPF-back exhaust gives you the option for a side exit or rear exit tailpipe. Both options will evacuate the exhaust gasses from under the vehicle. Utilizing a factory style hanger this system is a direct bolt-on system, which requires no cutting or modifications for a hassle-free installation. State-of-the-art computer-aided design technology is utilized for precise vehicle fitment. 100% MIG-Welded for race-proven strength and durability.

• Upgrade your Sprinter's exhaust with this Vulcan Series DPF-back. Designed to evacuate NOx from under your van, it’s a must-have for camping enthusiasts.
• Constructed from 3 IN Mandrel-Bent 304 Stainless Steel Tubing
• 4 IN Diameter Black 304 Stainless Steel Clamp-On Exhaust Tip
• Utilizes Factory Style Hanger for a Secure Fit
• 100% MIG-Welded for Strength and Durability

This Part Fits:

This cat-back exhaust system is constructed of 2-1/2 IN mandrel-bent 304 stainless steel tubing for maximum strength and durability. This system features a high-flow 304 stainless steel muffler, producing a deep sound. Finishing off this exhaust system is a dual 3-1/2 IN diameter polished 304 stainless steel exhaust tip. The tip features a laser etched aFe POWER logo for a unique style. This system produces a deep sound unleashing all available horsepower and torque. Some cutting may be required, see instruction sheet for further information. Utilizing factory style hangers this system mounts directly to factory mounting locations for a hassle-free installation. State-of-the-art computer-aided design technology is utilized for precise vehicle fitment. 100% MIG-Welded for race-proven strength and durability.

• Constructed from 2-1/2 IN Mandrel-Bent 304 Stainless Steel Tubing
• Dual 3 1/2 IN Diameter Polished 304 Stainless Steel Exhaust Tip
• Utilizes Factory Style Hangers for a Secure Fit
• 100% MIG-Welded for Strength and Durability

This Part Fits:

This cat-back exhaust system is constructed of 2-1/2 IN mandrel-bent 304 stainless steel tubing for maximum strength and durability. This system features a high-flow 304 stainless steel muffler, producing a deep sound. Finishing off this exhaust system is a dual 3-1/2 IN diameter black 304 stainless steel exhaust tip. The tip features a laser etched aFe POWER logo for a unique style. This system produces a deep sound unleashing all available horsepower and torque. Some cutting may be required, see instruction sheet for further information. Utilizing factory style hangers this system mounts directly to factory mounting locations for a hassle-free installation. State-of-the-art computer-aided design technology is utilized for precise vehicle fitment. 100% MIG-Welded for race-proven strength and durability.

• Constructed from 2-1/2 IN Mandrel-Bent 304 Stainless Steel Tubing
• Dual 3 1/2 IN Diameter Black 304 Stainless Steel Exhaust Tip
• Utilizes Factory Style Hangers for a Secure Fit
• 100% MIG-Welded for Strength and Durability

This Part Fits:

5" Aluminized Steel Construction: This DPF-back exhaust system is constructed of 5" mandrel-bent aluminized steel tubing for maximum strength and durability.7" Diameter Black Exhaust Tip: Finishing off this exhaust system is a 7" diameter black stainless steel clamp-on exhaust tip. The tip features an aFe POWER logo plate riveted on for a unique style.Installation: Utilizing factory style hangers this system is a direct bolt-on system, which requires no cutting or modifications for a hassle-free installation.Computer-Aided Design: Utilizing state-of-the-art computer-aided design technology, this exhaust system is designed for custom, high tolerance factory fitment.MIG-Welded: 100% MIG-Welded for race-proven strength and durability.Fitment Note: This product only fits Crew Cab, Long Bed (8' Box) 169" wheelbase models.Emissions Disclaimer: This product does not require a CARB EO#.aFe POWER exhaust systems are engineered and manufactured in our Corona, California facility.

• All Necessary Hardware is Included for a Hassle-Free Installation
• Constructed from 5 Mandrel-Bent Aluminized Steel Tubing
• 7 Diameter Black Stainless Steel Clamp-On Exhaust Tip
• Utilizes Factory Style Hangers for a Secure Fit
• 100% MIG-Welded for Strength and Durability

This Part Fits:

This system produced gains of up to +20 HP and +23 lbs. x Ft. TQ., as measured on our in-house dyno. This system is constructed of 1-5/8 IN mandrel-bent 304 stainless steel tubing for maximum strength and durability. Factory style laser cut machined mild steel flanges are used used for a secure leak-free seal. These headers retain your stock catalytic converters and are a direct bolt-on installation which requires no cutting or drilling to provide a hassle-free installation. Mitered collectors decrease turbulence and increase exhaust velocity. The result is increased horsepower, torque and improved throttle response. A Machined ball flange ensures a leak-free seal over the life of the vehicle. 100% MIG-Welded for race-proven strength and durability.

• Heavy Duty Laser Cut Machined Flanges are used for a Durable Leak-Free Seal
• Constructed from 1-5/8 IN Mandrel-Bent 304 Stainless Steel Tubing
• Works with Factory Exhaust System with No Modifications Necessary
• Optimized Tube Lengths for Improve Flow and Performance
• 100% MIG-Welded for Strength and Durability
• Up to +20 HP and +23 lbs. x Ft. TQ.

This Part Fits:

This system produced gains of up to +11 HP and +19 lbs. x Ft. TQ., as measured on our in-house dyno. This system is constructed of 1-7/8 IN - 2-1/4 IN mandrel-bent 304 stainless steel tubing for maximum strength and durability. Factory style laser cut machined mild steel flanges are used used for a secure leak-free seal. Utilizing factory style and flanges this system is designed to fit in the stock locations with no cutting or modifications required for a hassle-free installation. State-of-the-art computer-aided design technology is utilized for precise vehicle fitment. 100% MIG-Welded for race-proven strength and durability.

• Heavy Duty Laser Cut Machined Mild Steel Flanges are used for a Durable Leak-Free Seal
• Constructed from 1-7/8 IN - 2-1/4 IN Mandrel-Bent 304 Stainless Steel Tubing
• Works with Factory Exhaust System with No Modifications Necessary
• Optimized Tube Lengths for Improve Flow and Performance
• 100% MIG-Welded for Strength and Durability
• Up to +11 HP and +19 lbs. x Ft. TQ.

This Part Fits:

aFe Power's new front differential cover brings performance engineering to the protection of your axle's differential. This differential cover is constructed out of durable cast aluminum with reinforced ribs for maximum strength. This cover comes with all necessary hardware for easy installation. Pro Series differential covers include an oil level sight glass and magnetic deep reach fill plug. This cover is finished with black powder-coating and machined fins for a distinctive look.Increased Oil Capacity: This cover has an increased oil capacity over stock for better performance over a longer duration.Built-in Internal/External Fins: Built-in internal and external fins transfer heat from the oil to the outside air for maximum cooling.Magnetic Plugs: This system incorporates a magnetic drain and deep reach fill plug to capture loose particles for maximum protection.Calibration Plug: Calibration plug set to the factory oil level to eliminate overfilling.Oil Level Sight Glass: A pre-installed oil level sight glass allows quick and easy oil inspection.When it comes to engineering for power, performance, protection and value, aFe Power is the only choice.

• Large oil level sight glass with calibration plug set to the factory oil level to eliminate overfilling
• Dual neodymium magnetic plugs are used for maximum gear protection
• Wrinkle-black powder-coating with machined fins
• Constructed out of durable cast aluminum
• Fits Jeep Dana M210 front axles

This Part Fits:

Silver Bullet throttle body spacers create turbulence in the air flow at the point just prior entry into the engine increasing horsepower, torque and improving throttle response and fuel efficiency. Silver Bullet throttle body spacers are constructed out of durable T-6061 billet aluminum and using a unique serrated/helix entry to create turbulence at the manifold while eliminating the annoying whistle found in other helix only throttle spacers.

• T-6061 Billet Aluminum Construction
• Eliminating The Annoying Whistle
• Up To +14 ft./lbs. Torque Gain
• 2 Year Limited Warranty
• Serrated/Helix Design
• Longer Intake Track
• Up To +10 HP Gain

This Part Fits:

Smooth transitions in the mandrel-bent aluminum pipes decrease turbulence and minimize pressure loss, increasing horsepower and torque. This kit includes high-quality, stainless-steel, spring-loaded T-Bolt clamps and heavy-duty, 5-ply, polyester reinforced silicone couplings for superior strength and durability. Finished in wrinkle black powder coating with a unique laser-etched aFe POWER logo for a custom look.

• Directly replace your RAM's restrictive charge pipes with aFe POWER’s BladeRunner free-flowing, heat-resistant aluminum charge pipes
• Features Premium Stainless-Steel Spring-Loaded T-Bolt Clamps And 5-Ply Silicone Couplings
• 1/8" NPT Ports are Provided for Connecting Sensors or Water Methanol Injection
• Powder Coated Wrinkle Black for Heat and Corrosion Resistance
• TIG-Welded 3-1/2" Aluminum Pipes

This Part Fits:

Smooth transitions in the mandrel-bent aluminum pipes decrease turbulence and minimize pressure loss, increasing horsepower and torque. This kit includes high-quality, stainless-steel, spring-loaded T-Bolt clamps and heavy-duty, 5-ply, polyester reinforced silicone couplings for superior strength and durability. Finished in wrinkle black powder coating with a unique laser-etched aFe POWER logo for a custom look.

• Details: Directly replace your RAM's restrictive charge pipe with aFe POWER's BladeRunner free-flowing, heat-resistant aluminum charge pipe.
• Features Premium Stainless-Steel Spring-Loaded T-Bolt Clamps And 5-Ply Silicone Couplings
• 1/8" NPT Ports are Provided for Connecting Sensors or Water Methanol Injection
• Powder Coated Wrinkle Black for Heat and Corrosion Resistance
• TIG-Welded 3" Aluminum Pipe

This Part Fits:

Smooth transitions in the mandrel-bent aluminum pipes decrease turbulence and minimize pressure loss, increasing horsepower and torque. This charge pipe kit provides a smooth transition between the turbo and the engine for lower operating temperatures and increased power. This kit includes high-quality, stainless-steel, spring-loaded T-Bolt clamps and heavy-duty, 5-ply, polyester reinforced silicone couplings for superior strength and durability. Finished in Textured Red powder coating with a unique laser-etched aFe POWER logo for a custom look.

• Directly replace your RAM's restrictive charge pipes with aFe POWER’s BladeRunner free-flowing, heat-resistant aluminum charge pipes
• Features Premium Stainless-Steel Spring-Loaded T-Bolt Clamps And 5-Ply Silicone Couplings
• 1/8" NPT Ports are Provided for Connecting Sensors or Water Methanol Injection
• Powder Coated Textured Red for Heat and Corrosion Resistance
• TIG-Welded 3" Hot Side and 3-1/2" Cold Side Aluminum Pipes

This Part Fits:

Smooth transitions in the mandrel-bent aluminum pipes decrease turbulence and minimize pressure loss, increasing horsepower and torque. This charge pipe kit provides a smooth transition between the turbo and the engine for lower operating temperatures and increased power. This kit includes high-quality, stainless-steel, spring-loaded T-Bolt clamps and heavy-duty, 5-ply, polyester reinforced silicone couplings for superior strength and durability. Finished in wrinkle black powder coating with a unique laser-etched aFe POWER logo for a custom look.

• Directly replace your RAM's restrictive charge pipes with aFe POWER’s BladeRunner free-flowing, heat-resistant aluminum charge pipes
• Features Premium Stainless-Steel Spring-Loaded T-Bolt Clamps And 5-Ply Silicone Couplings
• 1/8" NPT Ports are Provided for Connecting Sensors or Water Methanol Injection
• Powder Coated Wrinkle Black for Heat and Corrosion Resistance
• TIG-Welded 3" Hot Side and 3-1/2" Cold Side Aluminum Pipes

This Part Fits: