Fits 2004-2014 Ford F-150 trucks. The Air Lift LoadLifter 5000 air spring kit provides up to 5,000 lbs of load-leveling capacity, designed to eliminate rear-end squat, trailer sway, and bottoming out when towing or hauling heavy loads. By restoring proper ride height, this kit ensures optimal braking and steering control while maintaining correct headlight aim.

• Load Capacity: Up to 5,000 lbs of leveling support (never exceed GVWR).
• Adjustability: Fully adjustable from 5 to 100 PSI for precise control based on load weight.
• Durability: Built with 2-ply fabric reinforced air springs and ultra-high-strength nylon composite end caps for corrosion resistance.
• Protection: Includes exclusive upper and lower roll plates to protect the air springs from sharp edges and increase load capacity.
• Reliability: Suspension components are torture-tested to 1 million cycles on a hydraulic rig for maximum longevity.
• Installation: Bolt-on installation using common hand tools with no frame drilling required.

Each LoadLifter 5000 kit (MPN 57200) includes air springs, roll plates, brackets, and all necessary hardware for a complete installation. Backed by a limited lifetime warranty and a 60-day ride satisfaction guarantee.

Fits select 1999-2005 Ford F-250 Super Duty, F-350 Super Duty, and Ford Excursion models.

The Air Lift LoadLifter 5000 (MPN 57154) is a heavy-duty air helper spring system designed to level your truck or SUV under significant loads. By installing these air springs between the factory leaf springs and the vehicle frame, you can eliminate common towing issues such as rear-end sag, trailer sway, and frequent bottoming out. The kit uses 2-ply fabric-reinforced bellows to provide up to 5,000 lbs of load-leveling capacity, ensuring a safer and more stable ride while towing or hauling.

• Up to 5,000 lbs of load-leveling capacity (do not exceed manufacturer's GVWR).
• Fully adjustable air pressure from 5 to 100 PSI for precise control over ride height and comfort.
• Constructed with rugged, 2-ply fabric-reinforced air springs for maximum durability.
• Simple bolt-on installation with all necessary hardware and fully-illustrated instructions included.
• Helps improve steering and braking response by maintaining proper weight distribution.
• Manufacturer Part Number: 57154

Vehicle Fitment:

The Air Lift 52500 Universal Air Spring Cradle is designed for lifted vehicles equipped with air suspension, allowing for full suspension travel without sacrificing towing capacity or ride quality. This system solves the common issue of air bags limiting suspension droop by leaving the air spring unattached to the lower bracket. This allows the bellows to cycle safely through its entire range of motion, securely seating back into the cradle upon compression.

Engineered from high-strength, lightweight resin, these cradles feature recessed mounting holes that allow for flexible bolt-up or bolt-down installation depending on your specific bracket configuration. Integrated drainage holes prevent the accumulation of water and debris within the cradle, ensuring long-term reliability in off-road and heavy-duty environments.

• Compatibility: Fits all Air Lift bellows-style air spring kits and most other brands
• Application: Essential for maintaining full suspension extension on lifted trucks
• Material: Durable and lightweight high-strength resin
• Installation: Recessed mounting holes for versatile bolt-up or bolt-down configuration
• Maintenance: Integrated drain holes to clear water and debris
• Quantity: Includes two (2) cradles and all necessary mounting hardware
• Manufacturer Part Number: 52500

The Air Lift 52500 kit includes a two-year warranty and a 60-day money-back guarantee, providing peace of mind for your air suspension setup.

The Air Lift 52460 Universal Level Air Spring Spacer allows owners of lifted trucks to restore the towing and hauling performance of their bellows-style air spring systems. This 6-inch straight spacer bridges the gap between the frame and axle created by lift kits, ensuring your air springs maintain the proper height to eliminate squat, trailer sway, and bottoming out.

Engineered for heavy-duty use, these spacers are manufactured from high-grade 1/4-inch steel and protected by a corrosion-resistant black powdercoat finish. The unique spinal design facilitates a secure and straightforward attachment to the air spring using the provided hardware. These spacers are designed for universal compatibility with Air Lift LoadLifter 5000 and LoadLifter 7500 XL systems, as well as most other bellows-style air springs.

• Designed for trucks equipped with 6-inch lift kits
• Bridges the gap for bellows-style air springs to restore factory load support
• Heavy-duty 1/4-inch steel construction for maximum durability
• Black powdercoat finish resists rust and road debris
• Unique spinal design simplifies the installation process
• Fits Air Lift LoadLifter 5000, 7500 XL, and most other major air spring brands
• Includes all necessary mounting hardware and illustrated instructions
• Manufacturer Part Number: 52460

The Air Lift 52445 Universal Angled Air Spring Spacer allows owners of lifted trucks to restore the full towing and hauling capacity of their vehicle. Specifically engineered for trucks with 4-inch lifts and under-frame air spring configurations, this angled spacer bridges the gap created by suspension lifts, ensuring your air springs operate at the correct height and orientation.

Constructed from high-grade 1/4-inch steel and finished in a durable black powdercoat, these spacers are built to handle heavy-duty loads. The unique spinal design simplifies the installation process, allowing the spacer to attach securely to bellows-style air springs using the included hardware. By correcting the air spring geometry, you eliminate common towing issues such as rear-end squat, poor headlight aim, trailer sway, and bottoming out.

• Designed for 4-inch lifted applications with angled under-frame mounting requirements
• Compatible with Air Lift LoadLifter 5000, LoadLifter 7500 XL, and most other bellows-style air springs
• Heavy-duty 1/4-inch steel construction for maximum durability
• Corrosion-resistant black powdercoat finish
• Includes all necessary mounting hardware and illustrated instructions
• Manufacturer Part Number: 52445

The Air Lift 52420 Universal Level Air Spring Spacer allows owners of lifted trucks to restore the full towing and hauling functionality of their air suspension. When a vehicle is lifted, the increased distance between the frame and the axle often leaves air springs unable to reach their mounting points. This 2-inch straight spacer fills that gap, ensuring your air bags maintain proper geometry to eliminate squat, trailer sway, and bottoming out.

Engineered for heavy-duty use, these spacers are constructed from high-grade 1/4-inch steel and finished with a robust black powdercoat for long-term corrosion resistance. The unique spinal design simplifies the attachment process to bellows-style air springs, including the Air Lift LoadLifter 5000 and LoadLifter 7500 XL series.

• Height: 2 inches (Straight/Level configuration)
• Construction: High-grade 1/4-inch steel for maximum load support
• Finish: Durable black powdercoat protects against road debris and weather
• Installation: Unique spinal design for simple attachment to air spring bellows
• Compatibility: Fits Air Lift LoadLifter 5000, 7500 XL, and most other bellows-style air spring brands
• Package Includes: 2-inch spacer and all necessary mounting hardware
• MPN: 52420

The Air Lift 52300 LoadLifter 5000 Ultimate Plus Stainless Steel Air Line Upgrade Kit allows owners of existing LoadLifter 5000 series air springs to upgrade their hardware to professional-grade specifications. This kit replaces standard nylon lines with 10 feet of braided stainless steel air line, providing significantly better protection against road debris, abrasion, and exhaust heat while maintaining the system's 5,000 lbs of load-leveling capacity.

Engineered for high-duty cycle towing and hauling, the kit features military-grade AN fittings to ensure a permanent, leak-free connection that outperforms standard push-to-connect hardware. These components are designed to withstand the rigors of heavy-duty use and have been torture-tested on hydraulic rigs to ensure long-term reliability. Installation is a straightforward process requiring only common hand tools with no frame drilling required.

• 10 feet of braided stainless steel air line for superior heat and debris resistance
• Military-grade AN fittings for secure, high-pressure seals
• Designed specifically for LoadLifter 5000 series air spring kits
• Eliminates common points of failure for improved towing safety and comfort
• Torture-tested for durability and longevity
• Manufacturer Part Number: 52300
• Limited lifetime warranty

Fits select 2007-2017 Chevrolet Silverado and GMC Sierra 1500, 2500 HD, and 3500 HD models.

The Air Lift 50297 is an exact replacement bellows-type air spring designed to restore the load-leveling capabilities of your existing air suspension system. Built for heavy-duty performance, it features a sturdy rubber construction reinforced with synthetic fabric to ensure high-burst strength and long-term reliability under heavy towing or hauling conditions.

This replacement air spring is equipped with genuine high-strength Zytel endcaps, which are engineered to be completely rust-proof and provide superior structural integrity compared to standard materials. This ensures a secure fit within your existing brackets and protection against harsh road environments.

• Direct replacement for original Air Lift bellows-type air springs
• Heavy-duty rubber construction with synthetic fabric reinforcement
• High-strength, rust-proof Zytel endcaps for maximum durability
• Engineered for high-burst strength and consistent load support
• Manufacturer Part Number: 50297

Fits select 2003-2017 Dodge and Ram 1500, 2500, and 3500 trucks.

The Air Lift 50293 is a direct-replacement bellows designed to restore the load-leveling performance of your original Air Lift air spring kit. Built for long-term service under heavy-duty conditions, it features a rugged rubber construction reinforced with synthetic fabric for high burst strength and resistance to environmental fatigue.

This replacement bellows is engineered with genuine high-strength, rust-proof Zytel endcaps and is structurally reinforced with a steel girdle ring to maintain proper alignment and shape under load. As a technical replacement part, it ensures an exact fit and restores the factory ride height and load-carrying capacity of your suspension system.

• Manufacturer Part Number: 50293
• Construction: Reinforced rubber with synthetic fabric
• Endcap Material: Rust-proof, high-strength Zytel
• Maximum Diameter: 7.0 inches
• Ride Height Range: 5.0 to 7.0 inches (inflated)
• Internal Support: Integrated steel girdle ring
• Warranty: Limited lifetime manufacturer warranty

The Air Lift 50291 is a technical direct-replacement sleeve-type air spring designed to restore the load-leveling performance of your existing Air Lift air suspension system. This component replaces a worn or damaged OE-style air spring with a heavy-duty rubber construction that is reinforced with synthetic fabric for superior burst strength and flexibility.

The assembly features high-strength, rust-proof Zytel endcaps and an inverted crimp design, which ensures the spring maintains its shape and seal throughout the suspension cycle. A steel girdle ring provides additional structural reinforcement, allowing for consistent operation between the specified 6.0-inch and 8.0-inch ride heights.

• Manufacturer Part Number: 50291
• Inflated Ride Height: 6.0 in. to 8.0 in.
• Maximum Diameter: 5.1 in.
• Construction: Synthetic fabric reinforced rubber bellows
• Endcaps: High-strength, corrosion-proof Zytel composite
• Design: Inverted crimp with steel girdle ring reinforcement

Fits 2015-2017 Ford Transit-150, Transit-250, and Transit-350 models.

The Air Lift 50290 is an exact bellows-style replacement air spring designed to restore the load-leveling performance of your existing Air Lift suspension system. Engineered for long-term durability, this bellows is constructed from heavy-duty rubber with synthetic fabric reinforcement to maintain high-burst strength under pressure.

This replacement unit features genuine Zytel endcaps, offering high-strength performance that is completely rust-proof and corrosion-resistant. A steel girdle ring is integrated into the design to maintain the bellows' shape and ensure consistent performance throughout its travel range.

• Manufacturer Part Number: 50290
• Proper Ride Height (Inflated): 5.0 to 7.0 inches
• Maximum Diameter: 7.0 inches
• Construction: Sturdy rubber with synthetic fabric reinforcement
• Endcaps: High-strength, rust-proof Zytel
• Reinforcement: Integrated steel girdle ring
• Warranty: Limited lifetime warranty

Restore your vehicle's air suspension performance with this Air Lift 50266 sleeve-style replacement air spring. Designed as an exact fit for your original Air Lift kit, this sleeve is engineered to maintain proper ride height and load support under demanding conditions. It features a robust rubber construction integrated with synthetic fabric reinforcement to ensure high-burst strength and long-term durability.

The 50266 utilizes high-strength, rust-proof Zytel endcaps and an inverted crimp design. This combination allows the air spring to maintain its shape and integrity throughout its travel, preventing deformation under pressure. Whether you are replacing a worn bag or performing routine maintenance, this component provides the reliability required for towing and hauling.

• Fitment: Fits select 1999-2014 Chevrolet Silverado 1500, Ford F-150, and GMC Sierra 1500.
• Construction: Sturdy rubber with synthetic fabric reinforcement.
• Endcaps: Genuine high-strength, rust-proof Zytel.
• Ride Height: Optimized for 4.0 to 6.0 inches.
• Max Diameter: 4.6 inches.
• Design: Inverted crimp for improved shape retention.
• Manufacturer Part Number: 50266

Fits select 2004-2017 Nissan Titan and Toyota Tacoma models.

The Air Lift 50256 is an exact replacement sleeve-type air spring designed to restore your vehicle's load-leveling performance. Engineered for long-term durability, this air spring is manufactured with heavy-duty rubber and synthetic fabric reinforcement for superior burst strength. The inverted crimp design ensures the bag maintains its shape, while high-strength, corrosion-proof Zytel endcaps provide a secure, rust-free mounting solution. This air spring is designed to function within an inflated ride height of 4.0 to 6.0 inches.

• Manufacturer Part Number: 50256
• Spring Type: Sleeve
• Inflated Ride Height: 4.0 in. - 6.0 in.
• Maximum Diameter: 5.1 in.
• Endcap Material: High-strength Zytel (Rust-proof)
• Construction: Reinforced rubber with synthetic fabric
• Crimp Style: Inverted crimp for shape retention
• Warranty: Limited lifetime warranty

Fits select 1966-2015 Chevrolet, Chrysler, Dodge, Ford, GMC, Nissan, and Toyota trucks, SUVs, and vans.

This Air Lift 50254 replacement air spring is an exact sleeve-type replacement designed to restore the performance and load-leveling capacity of your vehicle's existing Air Lift suspension system. Built for long-term durability, the spring is constructed from sturdy rubber reinforced with synthetic fabric to ensure high-burst strength and reliable vibration damping under heavy loads.

The 50254 features genuine high-strength, rust-proof Zytel endcaps that resist corrosion even in harsh under-car environments. An inverted crimp design helps the air bag maintain its proper shape and alignment throughout its service life, preventing premature wear. This component is an essential replacement for worn or damaged air sleeves, ensuring your air suspension maintains its 4.0 to 6.0-inch proper ride height.

• Manufacturer Part Number: 50254
• Spring Type: Sleeve
• Inflated Ride Height: 4.0 in. to 6.0 in.
• Maximum Diameter: 4.6 in.
• Material: Fabric-reinforced rubber with Zytel endcaps
• Features: Inverted crimp design for shape retention and high-burst strength

Fits select 1996-2017 Chevrolet Express 2500/3500, GMC Savana 2500/3500, and Freightliner/Mercedes-Benz Sprinter 2500.

The Air Lift 50252 Replacement Bellows is an exact-fit component designed to restore the performance and load-leveling capacity of your original Air Lift air suspension system. Engineered for heavy-duty use, this bellows features a sturdy rubber construction reinforced with synthetic fabric to handle high-burst pressures and frequent load cycling. To prevent corrosion in harsh underbody environments, it utilizes genuine high-strength, rust-proof Zytel endcaps and is structurally reinforced with a steel girdle ring to maintain its shape under pressure.

• Manufacturer Part Number: 50252
• Design: Bellows-type air spring with steel girdle ring
• Inflated Ride Height: 4.0 in. to 6.0 in.
• Maximum Diameter: 7.0 in.
• Endcap Material: High-strength, rust-proof Zytel
• Construction: Reinforced rubber with synthetic fabric
• Fitment: Direct replacement for original Air Lift springs
• Warranty: Limited lifetime warranty

Fits 2014-2018 Ram 2500. This individual Air Lift replacement air spring is designed specifically for use with the LoadLifter 7500 XL air spring kit (MPN 57589).

Constructed for heavy-duty load support, this bellows is built from sturdy rubber with synthetic fabric reinforcement to maintain integrity under high-pressure applications. It features a built-in internal jounce bumper, providing a secondary layer of protection to prevent damage from bottoming out if the air pressure is low.

• Direct replacement air spring for Air Lift LoadLifter 7500 XL kit 57589
• High-strength rubber construction with synthetic reinforcement
• Internal jounce bumper for added protection and ride quality
• Restores towing and hauling capacity to factory kit specifications
• Includes one (1) replacement air spring
• MPN: 50236

Maintain the performance and load-leveling capacity of your air suspension system with this Air Lift 50207 replacement bellows. Engineered as a direct replacement for original Air Lift bellows-type air springs, this unit restores ride quality and durability when an existing spring is worn or damaged.

Built for long-term service, this air spring features sturdy rubber construction with synthetic fabric reinforcement to provide high burst strength. The assembly is equipped with genuine high-strength Zytel endcaps, which are completely rustproof and provide a secure seal, along with a steel girdle ring to maintain the proper shape of the bellows under pressure.

• MPN: 50207
• Inflated Proper Ride Height: 3.5 to 5.0 inches
• Maximum Diameter: 6.5 inches
• Construction: Reinforced rubber with synthetic fabric
• Endcaps: High-strength, rustproof Zytel nylon
• Reinforcement: Steel girdle ring for structural integrity
• Warranty: Manufacturer limited lifetime warranty

Fits select 1965-2010 Chevrolet, GMC, Ford, and Dodge vehicles.

Restore the load-leveling performance of your air suspension system with this Air Lift 50201 replacement air spring. This bellows-type bag is an exact replacement for your original Air Lift component, engineered to maintain proper ride height and stability when towing or hauling. Built from sturdy rubber with synthetic fabric reinforcement, this spring is designed for high-burst strength and long-term durability in demanding environments.

• High-Strength Construction: Features genuine, rust-proof Zytel endcaps and a steel girdle ring for structural integrity and shape retention.
• Bellows Design: The inverted crimp design ensures the bag holds its shape over a long service life.
• Specific Tolerances: Designed for an inflated proper ride height of 5.0 to 7.0 inches.
• Dimensions: Maximum diameter of 7.0 inches.
• Manufacturer Part Number: 50201

This air spring replaces the bellows portion of your existing kit to ensure your suspension remains airtight and effective.

The Air Lift 26897 is a direct replacement main wiring harness for 2nd Generation WirelessAIR air spring control systems. This heavy-duty harness is engineered to provide the essential electrical backbone for your on-board air management, ensuring reliable power delivery and communication between the manifold, compressor, and battery.

Designed as a genuine service part, it restores original performance to your air suspension controls without the need for custom wiring or splicing. This harness features automotive-grade connectors and protective looming to maintain circuit integrity in harsh underbody environments.

• Direct replacement harness for Air Lift WirelessAIR (2nd Generation) kits 74000 and 74000EZ
• Ensures secure electrical connections between manifold, compressor, and power source
• High-quality weather-resistant connectors for long-term durability
• Manufacturer Part Number: 26897

Restore full functionality to your Air Lift WirelessONE 2nd Generation air suspension system with this direct-replacement wiring harness. This harness provides the necessary electrical connections for the WirelessONE manifold and other system components, ensuring reliable power and communication for precise air spring control.

Designed to meet original equipment standards, this harness is crucial for maintaining the integrity and performance of your WirelessONE system. Ideal for replacing a damaged, worn, or non-functional existing harness to get your wireless air management back online.

• Specifically engineered for Air Lift WirelessONE 2nd Generation systems
• Ensures proper electrical connection to all vital components
• Direct-replacement design for straightforward installation
• Manufacturer Part Number: 26896

Precisely monitor your air spring pressures with the Air Lift Dual Gauge Panel Assembly. This panel is specifically designed for a clean, integrated installation in conjunction with Air Lift 25812 air management systems, allowing for dedicated display of two air gauges (not included).

Essential for proper air suspension management, this panel provides a secure and professional mounting point for your air pressure gauges, ensuring critical data is always visible. It's built for durability and engineered to seamlessly integrate into your vehicle's interior.

• Manufacturer Part Number: 26159
• Designed for use with Air Lift 25812 Air Management Systems
• Provides dedicated mounting for two air pressure gauges
• Made In USA
• Warranty: Air Lift 2-Year Limited Warranty

The Air Lift 25981EZ WirelessOne Tank Kit with EZ Mount provides a complete, professional-grade solution for managing air spring pressure without searching for an external air source. This single-path system is designed to inflate or deflate your air springs to the same pressure simultaneously, making it an ideal choice for vehicles carrying balanced, centered loads. The standout feature is the EZ Mount system, which arrives pre-assembled from the factory with the manifold and solenoid already mounted to a durable, black powder-coated steel bracket to significantly reduce installation time.

This comprehensive kit includes a heavy-duty 444c air compressor and a 2-gallon powder-coated steel reserve tank for rapid adjustments and auxiliary use. Control the system with ease using the included wireless handheld remote or via the free mobile app for iOS and Android. Both interfaces allow for three user-programmable presets, enabling you to store and recall your most frequent towing or hauling pressures instantly.

• Manufacturer Part Number: 25981EZ
• System Type: Single-path, Bluetooth-enabled air management
• Pressure Range: Operates air springs from 5 to 100 PSI
• Compressor: Heavy-duty 444c compressor with 110-145 PSI pressure switch
• Storage: 2-gallon black powder-coated steel reserve tank
• Mounting: Factory-assembled EZ Mount steel bracket
• Control: Wireless handheld controller and mobile app integration
• Inclusions: Coiled hose with quick-connect for filling tires or inflatables, plus all required wiring and hardware
• Compatibility: Universal design works with most brands and types of air springs

The Air Lift WirelessOne (2nd Generation) with EZ Mount (MPN: 25980EZ) provides a streamlined solution for managing air spring pressure without running airline tubing into the vehicle cab. This single-path system inflates or deflates both air springs simultaneously to the same pressure, making it an ideal choice for vehicles carrying loads that are evenly distributed across the rear axle. Control is handled via the included wireless handheld unit or through a mobile app via Bluetooth, featuring three programmable user presets for your most frequent towing and hauling configurations.

The EZ Mount system significantly reduces installation time by packaging the manifold and an upgraded heavy-duty compressor onto a pre-assembled, factory-tested bracket. The included 12V compressor is rated for 120 PSI and is compatible with any brand of air springs. By eliminating the need for dashboard gauges and cab-mounted switches, this system maintains a clean interior while providing precise air management for improved vehicle leveling and ride quality.

• Wireless handheld controller and Bluetooth mobile app compatibility
• EZ Mount bracket for a faster, pre-assembled installation
• Single-path control ensures left and right air springs are inflated equally
• Three programmable memory settings for one-touch pressure adjustments
• No air lines required inside the vehicle cabin
• Heavy-duty 120 PSI, 12V air compressor
• Manufacturer Part Number: 25980EZ

• System Type: Single-Path
• Max Pressure: 120 PSI
• Voltage: 12V
• Warranty: 2-Year Limited

The Air Lift WirelessOne (2nd Generation) provides effortless on-board air control for any brand of aftermarket air spring. This single-path system inflates or deflates both air springs simultaneously to the same pressure, eliminating the need to search for external air sources or manually adjust Schrader valves. With a versatile operating range of 5-100 PSI, it allows for rapid adjustments to compensate for varying loads and towing requirements from the palm of your hand.

Installation is streamlined for efficiency, typically taking about an hour. The system requires no air lines or wiring to be routed into the vehicle cab and does not require tapping into the factory ignition wire, preventing the need to drill through the firewall. The weather-resistant, corrosion-proof manifold features an integrated relay and communicates via Bluetooth with both the included handheld controller and the free WirelessOne mobile app for iOS and Android.

• Single-path control: Inflates and deflates both springs to equal pressure
• Operating range: 5-100 PSI
• Dual control options: Wireless handheld LCD controller and Bluetooth-enabled mobile app
• Programmable with up to three user-defined memory settings
• Compact, weather-resistant manifold with integrated relay
• Over-the-air software updates via the free mobile app
• Universal compatibility with all brands of air springs
• Complete kit includes wiring harness, installation hardware, and compressor
• Manufacturer Part Number: 25980

Fits select 1980-2017 Acura, Buick, Cadillac, and Chevrolet models. The Air Lift Load Controller Dual Heavy Duty Compressor system (MPN 25856) provides convenient, on-the-go air pressure adjustment directly from the driver’s seat. This dual-path system allows for independent control of two air springs (or four springs in pairs), making it the ideal solution for leveling uneven loads or improving stability during cornering by reducing body roll and air transfer between springs.

Built for frequent use, this kit features a heavy-duty compressor designed for durability and faster inflation times. The in-cab control center features a user-friendly analog gauge with integrated inflate and deflate buttons. For added safety, an exclusive low-pressure sensor automatically monitors the system and adds air if the pressure drops below 5 PSI, protecting your air springs from damage. The system is compatible with any brand of air springs and includes a pre-assembled wiring harness for a straightforward installation.

• Dual-path control for independent left-to-right or front-to-back leveling
• Heavy-duty compressor designed for frequent use and frame-mount durability
• Automatic low-pressure sensor activates at 5 PSI to protect air springs
• Analog gauge fits standard 2-1/8 inch gauge pods or can be dash-mounted
• Includes pre-assembled wiring harness and fully illustrated installation manual
• Manufacturer Part Number: 25856

Fits select 1980-2017 Acura, Buick, Cadillac, and Chevrolet vehicles including MDX, Enclave, Riviera, Regal, Fleetwood, Impala, and C/K series trucks. The Air Lift LoadController (Compact, Single Path, Heavy Duty) provides the convenience of on-the-go air pressure adjustment directly from the driver’s seat. This single-path system is engineered to inflate or deflate a pair of air springs simultaneously to the same pressure, ensuring a level load whether you are parked or traveling at highway speeds.

Built for frequent users and heavy-duty towing applications, this kit features a high-capacity compressor that mounts directly to your vehicle's frame. The system includes a dashboard-mounted gauge with integrated one-touch controls and an exclusive low-pressure sensor. This safety feature automatically monitors your air springs and activates the compressor if pressure drops below 5 PSI, protecting your suspension components from damage. Installation is streamlined with a pre-assembled wiring harness and a customizable mounting pod that fits standard 2 1/8-inch gauge openings or flush-mounts to the dash.

• Manufacturer Part Number: 25854
• System Type: Single Path (adjusts two air springs to the same pressure)
• Compressor Grade: Heavy Duty
• Pressure Monitoring: Integrated 5 PSI low-pressure sensor for automatic protection
• Control Type: In-cab analog gauge with one-touch inflate/deflate buttons
• Mounting: Includes 2 1/8 in. gauge pod and mounting cup
• Compatibility: Works with any brand of bellows-style air springs
• Included Hardware: Pre-assembled wiring harness, air lines, and illustrated manual