Fits 2024-2025 Jeep Wrangler models including High Altitude 4xe, Rubicon, Sahara, Sport, and Willys (4xe/Gas).

The Bilstein B8 5100 2.5-inch Lift Kit is a complete suspension solution designed to increase ground clearance and off-road articulation for the 2024-2025 Jeep Wrangler JL. This kit is specifically engineered to optimize the factory suspension geometry without requiring additional aftermarket correction brackets or components. By utilizing custom-matched, cold-wound coil springs and B8 5100 gas-pressure monotube shocks, this system delivers a smooth and stable ride on paved surfaces while providing the increased wheel travel needed for technical trails.

• Provides 2.5 inches of lift for increased ground clearance
• Allows Rubicon models to clear 35-inch tires
• Allows non-Rubicon models with stock fenders to clear 33-inch tires
• Includes four (4) B8 5100 shock absorbers tuned for this specific application
• Includes four (4) custom-matched, longer-travel cold-wound coil springs
• Bolts directly to factory mounting locations for a straightforward installation
• Manufacturer Part Number: 53-350510

Kit Includes: (4) B8 5100 Shocks, (4) Coil Springs, and all necessary supporting hardware for a complete installation.

Fits select 2003-2009 Lexus GX470 and Toyota 4Runner and FJ Cruiser models.

The Bilstein B8 8112 (ZoneControl CR) is a high-performance, position-sensitive coilover shock engineered for demanding off-road terrain and refined on-road manners. This 2.65-inch body monotube module features ZoneControl CR technology, which utilizes a sophisticated triple piston design. This system provides three stages of compression valving and two stages of rebound valving to deliver plush ride quality during daily driving while maintaining maximum bottom-out control during high-amplitude suspension cycles.

Each module is equipped with a 60mm remote reservoir to maximize oil capacity and heat dissipation, ensuring consistent damping performance under heavy use. The threaded spring seat allows for precise ride height adjustments, offering a lift range of 0 to 3.8 inches depending on the specific vehicle application. The kit includes a bolt-on, anodized reservoir chassis mount for a secure and clean installation.

• Manufacturer Part Number: 41-326336
• Series: B8 8112 (ZoneControl CR)
• Piston Type: Triple piston design for 3-stage compression and 2-stage rebound
• Body Diameter: 2.65 inches
• Reservoir: 60mm remote reservoir for increased cooling
• Adjustability: Threaded spring seat for 0-3.8" ride height adjustment
• Mounting: Includes bolt-on anodized reservoir chassis mount
• Placement: Front Right

Fits select 2003-2009 Toyota 4Runner, FJ Cruiser, and Lexus GX470.

The Bilstein B8 8112 (ZoneControl CR) is a high-performance, position-sensitive coilover module engineered to provide unparalleled ride comfort during daily driving and maximum control during aggressive off-road use. This front left corner module features a 2.65-inch body and utilizes a sophisticated triple-piston design, delivering three stages of compression valving and two stages of rebound valving to handle large suspension inputs with precision.

• Direct Fit: Designed for specific light trucks and SUVs for a seamless installation.
• Adjustable Ride Height: Threaded spring seat allows for ride height adjustments ranging from 0-3.8 inches.
• Remote Reservoir: 60mm remote reservoir provides increased oil capacity and enhanced cooling for consistent performance.
• ZoneControl CR: Revolutionary position-sensitive damping controlled by three independent pistons.
• Premium Hardware: Includes a bolt-on anodized reservoir chassis mount.
• Manufacturer Part Number: 41-326329

Fits 2000-2011 Ford Focus models including LX, S, SE, SEL, SES, SVT, ST, and ZX series.

The Bilstein B8 Performance Plus damper (MPN: 24-066662) is a high-pressure gas monotube shock absorber specifically engineered to be paired with aftermarket lowering springs or factory sport suspensions. Unlike standard replacement dampers, the B8 features a shortened stroke to ensure proper spring tension and optimized piston travel for vehicles with a reduced ride height, delivering significantly improved handling and steering response.

• 46mm monotube design ensures consistent, fade-free performance under varying conditions
• Application-specific valving tuned to enhance the handling characteristics of the Ford Focus chassis
• Direct bolt-on replacement for factory rear dampers
• Optimized for use with lowering spring sets and production sport suspensions
• Rigorous testing ensures quality that meets or exceeds OE standards

Fits select 2007-2016 Chevrolet Silverado 1500 and GMC Sierra 1500 models.

The Bilstein B8 Upper Control Arm kit (51-304669) is a direct-fit upgrade for factory upper control arms on GM 1500 trucks. These arms are specifically engineered to correct caster alignment for improved straight-line stability on vehicles with lifted suspensions. The improved pivot angles allow for increased wheel travel while reducing joint stress during suspension articulation.

Fabricated from heavy-duty 4130 chromoly steel, the tubular design offers superior strength and provides additional clearance for larger springs and shock bodies. The kit features greasable polyurethane bushings and heavy-duty ball joints for an ideal balance of ride quality, durability, and minimal maintenance. All components are serviceable and replaceable for long-term reliability.

• Fits 2007-2016 Chevrolet Silverado 1500 and GMC Sierra 1500
• Tubular 4130 chromoly steel construction with a durable black powder-coated finish
• Corrects caster alignment on lifted applications to restore handling characteristics
• Increases total wheel travel and improves pivot angles over factory arms
• Includes greasable polyurethane bushings and heavy-duty ball joints
• Fully compatible with Bilstein shocks and coilover kits
• Manufacturer Part Number: 51-304669
• Sold as a pair including all necessary installation hardware

Fits 2012-2020 BMW 320i, 328d, 328i, 330e, 330i, 428i, and 430i.

The Bilstein B12 Pro-Kit is a comprehensive suspension solution designed to enhance the handling and aesthetics of your BMW. This kit replaces factory shocks and springs with application-tuned Bilstein performance dampers and precision-engineered Eibach Pro-Kit lowering springs. By matching the damping rates specifically to the progressive spring characteristics, this kit provides a fixed-height lowering solution that improves turn-in and reduces body roll without compromising the refined ride quality expected of a BMW.

• Moderate Lowering: Offers a drop of 25-40mm depending on the specific model and chassis configuration.
• Eibach Pro-Kit Springs: Progressive spring design provides comfortable compliance during daily driving and increased stiffness under heavy loads.
• Precision Tuning: Dampers and springs are road-tested and tuned together for optimized suspension dynamics and safety.
• High-Quality Construction: Features Bilstein's gas-pressure technology for consistent, fade-free performance.
• Manufacturer Part Number: 46-223661

The Bilstein B4 OE Replacement rear shock absorber is engineered to restore the factory ride quality and handling performance of your classic BMW. Designed as a direct-fit twintube damper, this unit meets or exceeds original equipment standards, providing the precise damping control and safety reserves required for the E28 5-Series and E24 6-Series chassis.

Fits select 1982-1989 BMW 528e, 533i, 535i, 535is, 633CSi, and 635CSi models.

• OE-Quality Restoration: Specifically tuned to match the original driving comfort and stability of your vehicle.
• Twintube Technology: Features a proven twintube design for consistent damping and long-term reliability under various driving conditions.
• Direct Fitment: Engineered to mount exactly like the factory component for a straightforward installation.
• Manufacturer Part Number: 19-020174

Whether you are maintaining a daily driver or refreshing a classic, Bilstein B4 dampers provide the world-famous quality and high power reserves needed for maximum safety and performance.

Fits select 1975-1988 Volkswagen Jetta, Rabbit, and Scirocco models.

The Bilstein B12 (Pro-Kit) suspension system is a comprehensive performance upgrade designed to improve handling and aesthetics through a balanced combination of dampers and springs. This kit replaces the factory suspension with Bilstein performance gas-pressure dampers and Eibach Pro-Kit progressive-rate springs, providing a moderate, fixed-height lowering of 25-40mm depending on the application.

Engineered for drivers seeking more precise steering response and reduced body roll, the B12 system is tuned specifically for each vehicle to maintain a high level of comfort while enhancing driving dynamics. The progressive spring characteristics ensure a compliant ride during normal cruising while firming up under load for better cornering stability and predictable control.

• Complete set including Bilstein performance dampers and Eibach Pro-Kit springs
• Lowering range of 25-40mm for a lower center of gravity and improved stance
• Progressive spring design for excellent dynamics and safety reserves
• Vehicle-specific tuning for optimized suspension harmonics
• Durable construction designed for long-lasting performance
• Manufacturer Part Number: 46-189868

Fits 2000-2009 Honda S2000 (Base and CR).

The Bilstein B16 (PSS9) suspension system provides track-inspired handling and street-ready versatility for the Honda S2000. This kit features 9-stage manually adjustable dampers that tune both rebound and compression settings simultaneously with a single click, allowing you to dial in the perfect balance for your driving environment. Built with monotube gas-pressure technology and matched performance springs, this system replaces the factory shocks and springs with a precision-engineered coilover solution.

The threaded zinc-coated bodies allow for fine-tuned ride height adjustments, offering a lowering range of approximately 30mm to 50mm. Each kit is finished with Bilstein's Triple-C Coating for long-term corrosion resistance and is rigorously tested under motorsport conditions on the Nürburgring.

• 9-stage manual damping adjustment (rebound and compression)
• Monotube gas-pressure construction for fade-free performance
• Threaded body for 30mm to 50mm height adjustability
• Triple-C Coating for superior corrosion resistance
• Includes matched performance springs and all necessary hardware
• Manufacturer Part Number: 48-088657

Fits 2005-2012 Porsche Boxster and 2006-2012 Cayman models without Porsche Active Suspension Management (PASM).

The Bilstein B6 Performance damper (MPN: 35-347835) is a gas-pressure monotube strut engineered to improve the handling and stability of your Porsche while retaining the factory ride height. Unlike dampers designed for lowering kits, the B6 series is specifically valved to work in harmony with your vehicle's original equipment (OE) springs, providing a significant performance upgrade without the need for additional suspension modifications.

• Monotube gas-pressure technology ensures consistent, fade-free damping under all driving conditions.
• Application-specific valving enhances lane stability and grip for both daily driving and extreme situations.
• Direct bolt-on replacement for factory rear struts; compatible with OE springs.
• Rigorous testing ensures durability that meets or exceeds original manufacturer standards.
• Manufacturer Part Number: 35-347835.

Fits 2013-2016 Ford Escape (S, SE, SEL, and Titanium).

The Bilstein B4 OE Replacement damper (MPN: 19-242927) is specifically engineered to restore your vehicle's original ride quality, handling, and safety performance. This rear twintube shock absorber is designed as a direct-fit replacement, meeting or exceeding original equipment standards to ensure your Ford Escape maintains factory driving dynamics without compromising on comfort.

• Restores original driving comfort and handling characteristics
• Twintube gas pressure technology for consistent damping performance
• High power reserves for maximum safety across all driving conditions
• Precise construction bolts directly to factory mounting points
• Built to high OE quality standards for long-term durability
• Manufacturer Part Number: 19-242927

Fits 2009-2016 Audi A4 Quattro and S4.

The Bilstein B12 (Pro-Kit) suspension system is a complete, vehicle-specific solution for drivers looking to improve chassis dynamics and aesthetics. This kit pairs Bilstein performance dampers with Eibach Pro-Kit springs, specifically tuned for the Audi B8/B8.5 platform to provide a fixed-height lowering solution. The combination replaces the factory shocks and springs with components engineered to work in unison, delivering a more aggressive stance and precise handling characteristics.

• Delivers moderate lowering between 24-40mm depending on vehicle application
• Includes Bilstein performance dampers and Eibach Pro-Kit progressive-rate springs
• Engineered for precise response, excellent driving dynamics, and high safety reserves
• Fixed-height design provides predictable control and improved cornering
• Application-specific tuning ensures optimal suspension travel and ride quality
• Manufacturer Part Number: 46-183330

The Bilstein B8 5125 series shock absorber (MPN: 33-230405) is a high-pressure gas monotube damper engineered for custom suspension builds and lifted truck applications where a direct-fit solution isn't available. Built with Bilstein’s signature 46mm digressive piston, these shocks provide consistent, fade-free performance by instantly reacting to changes in surface conditions.

Each B8 5125 unit features a self-adjusting deflective disc valving system to maintain control across varying terrain. These shocks come standard with industry-standard 5/8-inch hourglass bushings, making them compatible with various custom mounting configurations. This specific KBOA model offers a 273.00mm collapsed length and a 416.50mm extended length for precise suspension travel management.

• 46mm monotube design ensures superior heat dissipation and consistent damping
• Patented digressive valving for immediate response to road and trail inputs
• Includes industry-standard 5/8-inch hourglass bushings
• Zinc-plated finish for enhanced durability and corrosion resistance
• Collapsed Length: 273.00mm (10.75in)
• Extended Length: 416.50mm (16.40in)
• Manufacturer Part Number: 33-230405

Fits 2017-2021 Honda Civic EX, EX-L, LX, Sport, and Sport Touring models.

Bilstein B4 Series OE Replacement dampers are specifically engineered to restore the original ride quality, handling, and safety of your vehicle. Designed to meet or exceed original equipment standards, these twintube gas-pressure dampers are the ideal choice for drivers looking to maintain factory performance with the added reliability of Bilstein engineering. By replacing worn components with the B4 Series, you ensure high power reserves for maximum safety and consistent damping performance across various driving conditions.

• Restores original driving comfort and stability
• Twintube gas pressure construction for consistent performance
• High power reserves for maximum safety and control
• Direct bolt-on replacement for factory hardware
• Manufacturer Part Number: 19-291024

Vehicle Fitment

Fits 2024-2026 Toyota Tacoma (SR, SR5, TRD Sport, TRD Off-Road, and Limited).

The Bilstein B8 5100 Series shock absorber is a gas-pressurized, monotube damper designed as a direct-fit replacement for the 2024-2026 Toyota Tacoma. Built for the rigors of off-road use while maintaining refined street manners, these shocks feature a 46mm piston diameter that provides consistent, fade-free performance across varied terrain and temperatures.

Each shock utilizes Bilstein’s patented velocity-sensitive, digressive valving to react instantly to changing surface conditions, improving vehicle stability and driver control. These dampers are specifically tuned for the Toyota Tacoma chassis to ensure optimal suspension travel and ride quality for trucks with rear suspension lifts.

• Large 46mm monotube design ensures consistent, fade-free performance in all conditions
• Patented digressive valving instantly reacts to changing surface conditions for maximum control
• Vehicle-specific tuning optimizes handling, comfort, and suspension geometry
• Direct-fit installation replaces the factory rear shock using existing mounting points
• Manufacturer Part Number: 24-333214

Fits 2017-2024 Mazda CX-5 (including Grand Touring, Sport, Touring, Signature, and 2.5 Turbo models).

The Bilstein B4 OE Replacement rear shock absorber is specifically engineered to restore the original ride quality, handling, and safety of your Mazda CX-5. This twintube gas pressure damper is designed to meet or exceed original equipment standards, making it the definitive choice for drivers looking to maintain factory-spec performance. By matching the precise valving characteristics of the OE components, the B4 series ensures consistent damping and high power reserves for maximum stability under varied driving conditions.

• Manufacturer Part Number: 19-290928
• Position: Rear
• Design: Twintube gas pressure
• Maintains original vehicle handling and comfort levels
• Engineered for direct-fit, bolt-on installation

Vehicle Fitment

Fits 2014-2018 Mazda 3 models across all trim levels including Sport, Touring, and Grand Touring.

The Bilstein B4 OE Replacement series is engineered to restore your vehicle's original ride quality, handling, and safety characteristics. Specifically designed for the 2014-2018 Mazda 3, this front left twintube gas pressure strut provides constant damping power under any load. By meeting or exceeding OE standards, these dampers are the ideal choice for drivers looking to maintain factory-level performance and comfort without compromising on durability.

• Manufacturer Part Number: 22-240200
• Series: B4 OE Replacement
• Damper Type: Twintube Gas Pressure
• Position: Front Left
• Design: Restores original driving comfort and precise handling
• Construction: High OE quality standards for maximum safety reserves

This part replaces worn factory components and bolts directly into original mounting points for a straightforward installation.

Fits select 2012-2020 BMW 320i, 328d, 328i, 330e, 330i, 335i, 340i, 428i, 430i, 435i, and 440i (including Gran Coupe models).

Bilstein B4 OE Replacement dampers are specifically engineered to maintain the original ride quality and handling characteristics of your vehicle. Designed to meet or exceed original equipment standards, these dampers are the ideal choice for drivers looking to restore factory performance. Utilizing a twintube design, these units provide the consistent damping and safety reserves necessary for everyday driving comfort.

• Manufacturer Part Number: 19-220079
• Series: B4 OE Replacement
• Internal Design: Twintube
• Installation Position: Rear
• Restores original driving comfort and safety standards
• High power reserves for maximum damping stability
• Precise construction to ensure exact fitment and longevity
• Engineered to maintain factory suspension geometry

Fits 1996-2002 BMW Z3 Roadster and Coupe.

The Bilstein B4 OE Replacement strut assembly is specifically engineered to restore the original ride quality, safety, and handling performance of your vehicle. Utilizing advanced twintube gas pressure technology, these dampers meet or exceed original equipment standards to provide the precise construction and high power reserves required for daily driving comfort.

• Replaces worn factory dampers to restore original driving characteristics
• Twintube gas pressure design for consistent damping performance
• Engineered to meet or exceed original equipment (OE) standards
• High power reserves for enhanced vehicle safety and control
• Direct fitment to factory mounting points for the front left position
• Manufacturer Part Number: 22-158819

Fits select 2015-2025 Audi A3 TDI and Volkswagen Jetta models (S, SE, SEL, Sport, R-Line).

Bilstein B4 OE Replacement dampers are engineered to restore your vehicle's original ride quality and handling performance. Designed as a direct-fit solution, these rear shocks meet or exceed original equipment standards, making them the ideal choice for replacing worn factory dampers. Each unit provides consistent damping power and high power reserves to maintain driving safety and comfort under various road conditions.

• Series: B4
• Position: Rear
• Type: OE Replacement
• Finish: Black Paint
• Manufacturer Part Number: 19-232355

Vehicle Fitment:

• 2015 Audi A3 TDI (Premium, Premium Plus, Prestige)
• 2019-2021 Volkswagen Jetta R-Line
• 2019-2025 Volkswagen Jetta S, SE, SEL
• 2019-2021 Volkswagen Jetta SEL Premium
• 2022-2025 Volkswagen Jetta Sport

Bilstein B8 8125 coilovers are engineered for serious off-road performance and custom suspension applications. This 46mm (2-inch) monotube shock is designed for use with dual-rate springs, providing the versatility needed for specialized off-road builds. A remote reservoir coupled with a high-temperature hose increases oil capacity and cooling, ensuring consistent, fade-free damping even under intense heat and high-stress cycles.

Built to withstand the harshest environments, the B8 8125 features a 22mm case-hardened, hard-chromed piston rod that offers exceptional tensile strength and resistance to rock chipping and sandblasting. The zinc-plated threaded body allows for rapid ride height adjustments and spring changes, while a competition-spec 3-stage seal pack prevents leaks during extreme travel. These coilovers are fully owner-rebuildable, ensuring long-term serviceability for dedicated trail and race vehicles.

• Manufacturer Part Number: 33-225487
• Series: B8 8125
• Design: 46mm Monotube with Remote Reservoir
• Extended Length: 19.00 inches
• Collapsed Length: 13.00 inches
• Piston Rod: 22mm Hard Chromed / Case Hardened
• Body Finish: Zinc Plated
• Hardware: Dual-rate coilover hardware included
• Origin: Made in the USA

The Bilstein B8 5165 series (25-331721) is a high-performance remote reservoir shock absorber engineered for custom off-road applications on light trucks and SUVs. Utilizing a 46mm monotube design, these shocks provide consistent, fade-free performance by increasing oil capacity for superior heat dissipation during aggressive driving. Each unit is equipped with a 360-degree swivel banjo hose fitting, allowing for a clean and flexible installation in tight spaces.

These shocks feature self-adjusting deflective disc valving that reacts immediately to surface changes, ensuring maximum vehicle control and durability in harsh environments. The eyelet-to-eyelet mounting configuration includes 5/8-inch hourglass bushings for secure fitment and reduced vibration transfer.

• Series: B8 5165
• Part Number: 25-331721
• Travel: 13.1 inches
• Valving: 170/60
• Bore Size: 46mm
• Mounting: 5/8-inch Eye/Eye
• Design: Monotube with Remote Reservoir
• Finish: Zinc Plated

Fits select 2003-2024 Toyota 4Runner, 2007-2014 Toyota FJ Cruiser, 2010-2023 Lexus GX460, and 2003-2009 Lexus GX470.

Bilstein B8 5160 remote reservoir shock absorbers are engineered as a direct-fit solution for lifted SUVs that demand consistent performance in harsh off-road environments. The monotube design ensures fade-free operation, while the external remote reservoir significantly increases oil capacity. This added volume improves heat dissipation and allows for increased wheel travel compared to traditional shocks.

Each shock is custom-tuned for its specific application using velocity-sensitive digressive valving. This self-adjusting deflective disc system reacts immediately to surface changes, providing maximum vehicle control and stability. For a clean, low-profile installation, these shocks feature a unique 360-degree swivel banjo hose fitting and include an application-specific billet reservoir mount where required.

• Manufacturer Part Number: 25-325096
• 46mm monotube design for consistent, fade-free performance
• Remote reservoir for increased oil capacity and superior heat dissipation
• Self-adjusting deflective disc valving for immediate terrain response
• 360-degree swivel banjo hose fitting for flexible installation
• Designed specifically for lifted Toyota and Lexus chassis

Bilstein B8 5165 Classic remote reservoir shock absorbers are engineered for custom off-road builds, light trucks, and SUVs requiring specialized suspension tuning. These high-pressure gas monotube shocks are designed to handle harsh terrain while maintaining consistent damping performance through a dedicated remote reservoir that increases oil capacity and heat dissipation.

Each shock features a 360-degree swivel banjo hose fitting for a clean, low-profile installation and flexible mounting options. The 46mm piston and self-adjusting deflective disc valving provide immediate response to surface changes, reducing fade during extended off-road use. These units are built to withstand the rigors of off-pavement environments while providing a precise, controlled ride.

• Remote Reservoir: Increases cooling capacity and allows for optimized wheel travel by moving the dividing piston into the reservoir.
• Monotube Design: Large 46mm piston ensures consistent, fade-free performance in all temperature conditions.
• Deflective Disc Valving: Self-adjusting valving reacts immediately to surface changes for maximum control.
• Durable Finish: Features Bilstein Triple-C-Technology coating for superior corrosion resistance.
• Mounting: Includes 5/8-inch eyelets with durable hourglass bushings on both ends.

• Manufacturer Part Number: 25-176124
• Travel: 9.5 inches
• Valving: 170/60
• Piston Diameter: 46mm
• Mounting Type: Eye to Eye (5/8in)
• Hose Fitting: 360-degree Swivel Banjo

Fits 2023-2026 Chevrolet Colorado WT, LT, and Z71 models.

The Bilstein B6 4600 shock absorber is engineered as a direct-fit upgrade for stock-height 2023-2026 Chevrolet Colorado trucks. Designed to replace worn OE dampers, these shocks utilize a 46mm monotube architecture that provides consistent, fade-free performance even under heavy loads or varying road conditions. The velocity-sensitive, digressive piston reacts instantly to surface changes, significantly improving handling, control, and ride comfort compared to factory equipment.

• 46mm monotube design ensures consistent, fade-free damping performance in all conditions
• Application-specific tuning for 2023-2026 Colorado WT, LT, and Z71 models at stock height
• Velocity-sensitive, digressive valving provides immediate response to road inputs
• Direct bolt-on installation compatible with OEM springs and mounting hardware
• Manufacturer Part Number: 24-336536

The Bilstein B6 Performance (24-066785) is a high-pressure gas damper designed to upgrade factory suspension performance without requiring new lowering springs. Built for the 2001-2003 Audi A8 Quattro and S8, this 46mm monotube shock absorber provides significant improvements in handling, lane stability, and damping control while retaining your vehicle's original ride height and factory springs.

Each damper features application-specific valve settings that are rigorously tested to meet or exceed OE standards. The monotube design allows for a larger piston surface area, ensuring consistent, fade-free performance even under extreme driving conditions or high-temperature operation. This is a direct-fit replacement for the original front dampers, offering a more connected driving feel and enhanced safety.

• Fits select 2001-2003 Audi A8 Quattro and S8 models.
• 46mm monotube gas-pressure construction for consistent damping.
• Application-specific ride tuning provides optimum grip and stability.
• Direct upgrade for OE dampers; compatible with factory series springs.
• Manufacturer Part Number: 24-066785

Fits select 1968-1996 Jaguar XJ, XJ6, XJ12, and XJS models. This Bilstein B6 Performance rear shock absorber (MPN: 24-024464) is a high-pressure gas damper designed as a direct-fit upgrade for vehicles retaining their factory coil springs.

The B6 series utilizes a 36mm monotube design, which allows for a larger piston surface area and better heat dissipation than standard twin-tube dampers. This results in consistent damping performance and improved lane stability even in demanding driving conditions. Each shock features application-specific valve settings, tuned to enhance the handling characteristics of your classic Jaguar without sacrificing daily ride quality.

• Gas-pressure technology for fade-free performance
• Vehicle-specific ride tuning for optimum grip and stability
• Direct replacement for OE dampers; works with factory springs
• Monotube construction for superior cooling and response
• Manufacturer Part Number: 24-024464

Fits 2013-2020 Nissan Pathfinder (Platinum, S, SL, SV).

Bilstein B4 OE Replacement dampers are specifically engineered to maintain and restore the original ride quality, handling, and safety of your vehicle. Designed to meet or exceed original equipment standards, these rear shocks provide a direct-fit solution for drivers looking to return their vehicle to factory performance levels. These dampers utilize Bilstein’s world-renowned quality to offer consistent damping control and high power reserves for improved stability.

• Restores original driving comfort, handling, and safety
• Engineered to meet or exceed OE quality standards
• High power reserves for maximum control and stability
• Direct-fit, bolt-on installation for the rear position

• Manufacturer Part Number: 19-301631
• Position: Rear
• Product Series: B4 OE Replacement

Fits select 2008-2017 Audi A4, A4 Quattro, A5, A5 Quattro, and S5 models.

The Bilstein B4 OE Replacement shock absorber is engineered to restore your vehicle's original handling characteristics and ride comfort. Designed to meet or exceed original equipment standards, these gas-pressure dampers provide the consistent performance and safety reserves expected from Bilstein. Whether you are replacing a high-mileage factory unit or restoring a daily driver, the B4 series ensures your Audi maintains its factory-intended damping profile.

• Manufacturer Part Number: 19-171623
• Damping Type: Gas-pressure technology for consistent performance
• Construction: Precise manufacturing to ensure exact fitment and longevity
• Benefit: Restores original driving comfort and high-power safety reserves
• Fitment: Direct replacement for the factory rear shock absorber

Fits select 2002-2006 Audi A4 and A4 Quattro (Base, Cabriolet, and Avant).

The Bilstein B4 (19-109510) OE Replacement damper is specifically engineered to restore your vehicle's original ride quality, handling, and safety. These shocks are a direct-fit solution for drivers looking to maintain the factory driving dynamics of their Audi with the reliability of Bilstein gas-pressure technology. Each unit is constructed to meet or exceed original equipment standards, providing a seamless replacement for worn-out factory struts.

• Twintube Gas Pressure Design: Provides consistent damping performance and prevents oil aeration for stable handling.
• Direct OE Replacement: Precision-engineered to bolt directly to factory mounting points without modification.
• Restored Performance: Reclaims the original comfort and high-power reserves required for maximum safety.
• Application Specific: Valved specifically for the front suspension of B6 and B7 chassis Audi A4 models.
• Manufacturer Part Number: 19-109510