Fits select 2007-2014 BMW X5 and X6 models (3.0si, 4.8i, xDrive30i, xDrive35d, xDrive35i, xDrive48i, xDrive50i) without Electronic Suspension.

The Bilstein B4 OE Replacement shock absorber is engineered to restore your BMW's original ride characteristics and handling precision. Designed as a direct-fit replacement for the factory dampers, these shocks utilize gas-pressure twintube technology to provide consistent performance and high power reserves. The B4 series is the ideal solution for drivers looking to maintain the signature BMW driving dynamics and safety standards without the cost or complexity of electronic damping systems.

• Manufacturer Part Number: 19-261515
• Position: Front
• Internal Design: Twintube Gas Pressure
• Direct-fit bolt-on installation into factory mounting points
• Engineered to meet or exceed original equipment standards
• Restores original driving comfort and stability
• Compatibility: For vehicles WITHOUT Electronic Suspension or Electronic Damping Control (EDC)

Fits select 1992-2005 Audi 100 Quattro, A6 Quattro, and Volkswagen Passat models. Please refer to the fitment table below for specific submodel compatibility.

The Bilstein B4 OE Replacement damper is engineered to restore your vehicle's original ride quality, handling, and safety. Designed to meet or exceed original equipment standards, these dampers are the definitive choice for drivers looking to maintain factory performance levels without compromising on durability or comfort. Each unit features precise construction and high power reserves to ensure consistent damping performance under various driving conditions.

• Restores original driving comfort and handling characteristics
• Engineered to meet or exceed OE standards for fit and function
• High power reserves for maximum safety and stability
• Gas-pressure technology for consistent, fade-free performance
• Manufacturer Part Number: 19-184067

Fits select 2008-2017 Mercedes-Benz C250, C300, C350, C63 AMG, E400, and E550 models. Refer to the fitment table for specific submodel compatibility.

The Bilstein B16 (PSS10) suspension kit is a track-tested, street-refined performance solution that replaces your factory struts and shocks with a fully adjustable coilover system. Engineered for drivers who demand precision, this kit features 10-stage manually adjustable dampers that tune both rebound and compression simultaneously with a single click. The monotube design provides consistent damping performance and heat dissipation under heavy load or spirited driving conditions.

Constructed with a zinc-coated threaded body, these dampers allow for precise ride height adjustments, enabling a lowering range of approximately 30mm to 50mm. Each kit is equipped with Triple-C Coating for superior corrosion resistance and features matched springs specifically tuned for your Mercedes-Benz chassis to ensure optimal balance and handling.

• Manufacturer Part Number: 48-141147
• Damping Control: 10-stage manual adjustment (rebound and compression)
• Lowering Range: 30mm - 50mm (front and rear)
• Damper Type: Gas-pressurized monotube
• Finish: Triple-C zinc-plated coating for long-lasting corrosion resistance
• Origin: Made in Germany, Nürburgring-tested technology

Fits select 1998-2008 Chrysler Crossfire and Mercedes-Benz SLK-Class (SLK230, SLK32 AMG, SLK320).

The Bilstein B14 (PSS) suspension kit delivers race-inspired handling and ride height adjustability in a direct-fit, OE-quality package. Engineered for drivers looking to improve both the stance and the cornering dynamics of their vehicle, this kit features monotube gas pressure dampers paired with application-specific progressive rate springs. Every kit is fine-tuned under motorsport conditions on the Nürburgring to ensure optimal performance and comfort.

The B14 system utilizes a threaded body design, allowing you to fine-tune your vehicle's height to find the perfect balance between aesthetics and clearance. To ensure longevity against road salts and moisture, Bilstein employs their proprietary Triple-C-Technology surface coating for superior corrosion resistance. This is a complete front and rear solution designed to replace worn factory components with precision-engineered German suspension technology.

• Monotube gas pressure construction for fade-free performance
• Threaded body allows for lowering of approximately 30mm to 50mm
• Triple-C-Technology surface coating provides long-lasting corrosion resistance
• Matched performance springs and dampers tuned for specific vehicle dynamics
• Made in Germany and tested on the Nürburgring
• Manufacturer Part Number: 47-119536

Fits 2009-2016 Audi A4 and A4 Quattro (Base, Premium, Premium Plus, Prestige, and Avant trims).

The Bilstein B12 (Pro-Kit) is a complete performance suspension solution engineered to provide a fixed-height lowering solution without sacrificing ride quality. This system combines four Bilstein performance-tuned dampers with a matched set of Eibach Pro-Kit lowering springs. The result is a significant improvement in handling dynamics, reduced body roll, and a more aggressive stance that closes the wheel-well gap by approximately 25-40mm depending on the specific application.

Each kit is application-specific, ensuring the progressive spring rates and damper valving work in harmony with the Audi A4 chassis. The gas-pressure dampers maintain consistent performance even under heavy loads, while the Eibach springs provide a predictable, controlled response during cornering and braking.

• Complete front and rear kit (4 dampers, 4 springs)
• Lowers vehicle 25-40mm for improved aesthetics and center of gravity
• Bilstein gas-pressure technology for fade-free performance
• Eibach Pro-Kit progressive rate performance springs
• Engineered for precise response and excellent driving dynamics
• Manufacturer Part Number: 46-183323

Fits select 2015-2023 Ford F-150 4WD models, including King Ranch, Lariat, Limited, Platinum, Tremor, XL, and XLT.

The Bilstein B8 8112 (ZoneControl CR) is a high-performance, 2.65-inch body position-sensitive coilover designed to provide superior ride comfort during daily driving and maximum control over large suspension inputs. Featuring a revolutionary triple piston design, this front left shock absorber offers three stages of compression valving and two stages of rebound valving for unparalleled damping precision.

Built for the demands of off-road use, this coilover module includes a threaded spring seat that allows for ride height adjustability between 0.7 and 2.7 inches. To ensure consistent performance and cooling during aggressive driving, the assembly is equipped with a 60mm remote reservoir and includes a dedicated bolt-on anodized reservoir chassis mount.

• Manufacturer Part Number: 41-326701
• Position: Front Left
• Lift Range: 0.7-2.7 inches
• Body Diameter: 2.65 inches
• Reservoir: 60mm Remote Reservoir
• Damping: ZoneControl CR position-sensitive triple piston design
• Valving: 3 stages of compression, 2 stages of rebound
• Installation: Direct-fit with included bolt-on reservoir mount

Fits 2003-2008 BMW Z4 (2.5i, 3.0i, and 3.0si Coupe/Roadster).

The Bilstein B8 Performance Plus strut assembly is a high-pressure gas monotube damper specifically engineered for drivers who have upgraded to aftermarket lowering springs or are using factory sport suspensions. By utilizing application-specific valve settings, these struts compensate for the reduced travel and increased spring rates of a performance setup, delivering improved handling and a sportier feel without compromising ride quality.

• 36mm Monotube Design: Large-diameter piston provides consistent, fade-free damping and superior heat dissipation under load.
• Performance Valving: Shortened stroke and specialized internal valving are optimized for use with lowering springs.
• Direct OE Replacement: Designed to bolt into factory mounting points on the front right position.
• Testing: Rigorously tested for durability and performance that meets or exceeds OE standards.
• Manufacturer Part Number: 35-124122

Fits 1988-1991 BMW 325iX Base models.

The Bilstein B6 Performance strut insert is a high-pressure gas monotube damper engineered as a direct performance upgrade for the factory front suspension on the E30 325iX. Designed specifically to be paired with the original equipment (OE) springs, these inserts provide increased damping control and lane stability without requiring a change to the vehicle's ride height or spring rate.

Utilizing Bilstein's signature gas-pressure technology and a 36mm monotube design, this insert offers consistent, fade-free performance by keeping the oil under pressure to prevent aeration. Each unit features application-specific valving to optimize the unique all-wheel-drive handling characteristics of the 325iX, ensuring improved tire grip and steering response in both daily driving and spirited conditions.

• Series: B6 Performance
• Internal Design: Monotube Gas-Pressure
• Body Diameter: 36mm
• Position: Front
• Compatibility: Replaces factory front strut inserts; uses OE springs
• Manufacturer Part Number: 34-002513

Fits select 2011-2026 Chevrolet Silverado 2500 HD/3500 HD and GMC Sierra 2500 HD/3500 HD models with 1.5 inches of front lift.

Bilstein B8 5160 remote reservoir shock absorbers are engineered as a direct-fit solution for HD trucks that require increased cooling capacity and wheel travel. Unlike traditional shocks, the 5160 series utilizes a remote reservoir to increase oil volume, facilitating superior heat dissipation and maintaining consistent damping performance during extended off-road use. Each unit features a 46mm monotube design and application-specific, velocity-sensitive digressive valving that reacts instantly to changing surface conditions for maximum vehicle control.

Installation is simplified with a unique 360-degree swivel banjo hose fitting, allowing for a clean, low-profile fitment even in tight wheel wells. These shocks provide the durability and fade-free performance needed to conquer harsh environments while maintaining a smooth ride on the highway.

• Manufacturer Part Number: 25-311884
• 46mm monotube design for consistent, fade-free performance
• Remote reservoir for increased oil capacity and heat dissipation
• Self-adjusting deflective disc valving for immediate reaction
• Zinc plated finish for corrosion resistance
• Includes unique 360-degree swivel banjo hose fitting

Fits 1996-2002 Toyota 4Runner 4WD (Base, Limited, and SR5 models).

The Bilstein B8 5160 remote reservoir shock absorber is engineered as a bolt-on solution for lifted Toyota 4Runners. The external remote reservoir provides increased oil capacity and surface area for superior heat dissipation, preventing damping fade during aggressive off-road use. Each shock utilizes a 46mm monotube design with velocity-sensitive digressive valving, specifically tuned to optimize wheel travel and chassis control for this vehicle platform.

• 46mm monotube construction ensures consistent, fade-free performance
• Remote reservoir increases cooling capacity and allows for extended wheel travel
• Self-adjusting deflective disc valving reacts immediately to varying terrain
• High-pressure 360-degree swivel banjo hose fitting for flexible, low-profile routing
• Direct-fit installation into factory mounting points
• Manufacturer Part Number: 25-311303

The Bilstein B8 Performance Plus monotube damper is engineered specifically for drivers using aftermarket lowering springs or factory production sport suspensions. While standard shocks can bottom out or lack control when paired with shorter springs, the B8 features a shortened piston rod and application-specific valving to maintain optimal suspension travel and damping response.

Built with Bilstein’s signature gas-pressure monotube technology, this 49mm front shock (MPN 24-274876) provides consistent, fade-free performance even under aggressive driving conditions. It replaces the worn OE unit to restore handling precision and provide a firmer, sportier feel without compromising daily drivability.

• Designed for use with lowering springs and sport suspensions
• Monotube gas pressure technology for instant response
• Shortened stroke ensures proper spring preload and tension
• 49mm diameter front shock housing
• Rigorously tested to meet or exceed OE quality standards
• Direct fit for Audi B9 chassis models

Fitment Note: Fits select 2017-2021 Audi A4, A4 Quattro, A5 Quattro, A5 Sportback, S4, S5, and S5 Sportback models equipped with 49mm front shock housings.

Fits select 2017-2021 Audi A4, A4 Quattro, A5 Quattro, A5 Sportback, S4, S5, and S5 Sportback.

Bilstein B8 Performance Plus dampers are the definitive performance upgrade for drivers looking to maximize the handling potential of their vehicle. Specifically engineered to be paired with aftermarket lowering springs or production sport suspensions, these shocks feature a shortened stroke to ensure proper spring preload and optimal suspension travel. The result is a sportier feel and significantly improved vehicle dynamics without sacrificing the reliability required for daily driving.

Utilizing a gas-pressure monotube design, this rear damper (MPN 24-262323) provides superior heat dissipation and consistent, fade-free damping performance under load. Each unit is rigorously tested to meet or exceed OE standards, ensuring a precise fit that bolts directly to factory mounting points. Whether you are looking to improve cornering stability or complete a suspension overhaul, the B8 Performance Plus series delivers world-famous Bilstein quality and control.

• Gas-pressure monotube construction for consistent damping performance
• Application-specific valving optimized for use with lowering spring sets
• Shortened piston rod ensures correct tension for lowering springs
• Enhances steering response, safety, and overall vehicle stability
• Direct-fit replacement for the original equipment rear dampers

Fits 2016-2022 Mercedes-Benz Metris Base models.

The Bilstein B6 Performance series is designed to enhance the handling and stability of your Mercedes-Benz Metris without sacrificing ride comfort. These shock absorbers feature a 46mm monotube design, providing consistent, fade-free damping performance even under heavy loads or varying road conditions. Each unit utilizes a velocity-sensitive, digressive piston that reacts instantly to surface changes to maintain tire contact and vehicle control.

Engineered for stock-height vehicles, this rear shock is tuned specifically for the Metris platform to ensure optimal damping characteristics. It is a direct bolt-on replacement that utilizes your factory springs and mounting hardware, making for a straightforward installation process.

• 46mm monotube design ensures consistent, fade-free performance in all conditions
• Digressive valving reacts to road inputs for improved stability
• Application-specific tuning for the Mercedes-Benz Metris
• Uses OEM springs and mounting hardware
• Designed for stock height vehicles
• Manufacturer Part Number: 24-262187

Fits 2015-2021 Subaru WRX and WRX STI (Base, Limited, Premium, Launch Edition, Series.HyperBlue, Type RA, and S209).

The Bilstein B8 Performance Plus is a high-performance monotube shock absorber specifically engineered to be paired with aftermarket lowering springs. Unlike standard dampers that can lose effectiveness when ride height is reduced, the B8 is valved and tuned to work within a lowered range of motion, providing the necessary piston travel to maintain optimal handling and comfort.

Built with Bilstein’s signature gas-pressure technology, this rear damper delivers consistent, fade-free performance even under aggressive driving conditions. It is the ideal solution for Subaru owners looking to improve suspension control and cornering stability while utilizing sport springs or production sport suspensions.

• Monotube gas pressure construction for instant damping response
• Application-specific valving tuned for the VA-chassis Subaru WRX and STI
• Optimized for use with lowering springs and sport suspensions
• Significant improvement in safety, traction, and lane-change stability
• Direct fit replacement for OE rear dampers
• Manufacturer Part Number: 24-249508

Fits select 1970-1999 Land Rover Defender 90, Defender 110, Discovery, and Range Rover models.

The Bilstein B6 4600 shock absorber is engineered as a direct-fit upgrade to improve the handling and stability of stock-height vehicles. Utilizing a gas-pressure monotube design, these shocks provide consistent, fade-free performance that exceeds traditional twin-tube dampers, even during demanding use. The large 46mm piston offers more surface area for damping control than standard shocks.

Equipped with a velocity-sensitive digressive piston, the B6 4600 reacts instantly to changing road conditions to provide firm control when cornering and a smooth, comfortable ride on the highway. Each unit is specifically tuned for the vehicle application to ensure the best possible ride quality and safety for your Land Rover.

• 46mm monotube design ensures consistent, fade-free performance in all conditions
• Velocity-sensitive digressive valving for vehicle-specific ride tuning
• Direct-fit upgrade compatible with OEM springs and mounting hardware
• Significant improvement in ride quality, handling, and comfort
• Manufacturer Part Number: 24-188296

Fits 2006-2015 Mazda MX-5 Miata models including Base, Club, Grand Touring, Sport, and Touring. Specifically engineered for vehicles equipped with aftermarket lowering springs or production sport suspensions.

The Bilstein B8 Performance Plus damper is a high-pressure gas monotube shock absorber designed to deliver track-inspired handling without sacrificing street drivability. Unlike standard dampers, the B8 series features a shortened stroke specifically optimized for use with lowering springs, ensuring the piston operates in its ideal range for improved rebound control and suspension travel. Every unit undergoes rigorous vehicle-specific tuning to provide a sporty feel and enhanced safety during aggressive cornering or rapid transitions.

• Performance Piston: 46mm monotube design provides a larger surface area for more precise damping and superior heat dissipation.
• Optimized Stroke: Engineered to work with lowering springs to maintain proper tension and performance.
• Vehicle-Specific Valving: Individually tuned for the NC chassis Mazda MX-5 Miata to maximize grip and stability.
• Durability: Built to meet or exceed OE quality standards for long-term reliability.
• Direct Fit: Replaces factory front dampers using existing mounting points.
• Manufacturer Part Number: 24-131766

Fits 2018-2020 Subaru Crosstrek Base, Hybrid, Limited, and Premium models.

The Bilstein B6 Performance series is the ideal choice for drivers looking to improve the handling and stability of their vehicle without altering ride height. This front right strut assembly is specifically tuned for the Subaru Crosstrek to provide a significant upgrade over factory damping, offering better control and comfort on both pavement and uneven terrain.

At the heart of the B6 series is a 46mm monotube design that ensures consistent, fade-free performance in all conditions. The velocity-sensitive, digressive piston reacts instantly to changing road surfaces, providing firm control when you need it while maintaining a smooth ride during normal cruising. These struts are designed to be a direct bolt-on replacement, utilizing your vehicle's OEM springs and mounting hardware.

• 46mm monotube gas-pressure construction for superior heat dissipation
• Application-specific tuning for stock height vehicles
• Digressive valving for improved handling and reduced body roll
• Compatible with original equipment springs and mounting hardware
• Position: Front Right
• Manufacturer Part Number: 22-283634

Fits 2014-2019 Toyota Highlander models including Hybrid LE, Hybrid Limited, Hybrid XLE, LE, LE Plus, Limited, SE, and XLE.

The Bilstein B6 Performance strut is the ideal choice for drivers looking to improve vehicle handling and stability without changing ride height. Engineered to replace factory struts while utilizing original springs and mounting hardware, this unit features a 46mm monotube design that provides consistent, fade-free performance even under heavy loads or varying road conditions.

Each strut is equipped with a velocity-sensitive, digressive piston that reacts instantly to surface changes, ensuring a significant improvement in ride quality and comfort. These struts are specifically tuned for the Toyota Highlander to provide optimal damping control for the stock suspension geometry.

• Manufacturer Part Number: 22-282873
• Position: Front Left
• 46mm monotube design for superior heat dissipation and consistent damping
• Velocity-sensitive digressive piston for precise handling control
• Application-specific tuning for stock height vehicles
• Uses OEM springs and factory mounting points for straightforward installation

Fits 2015-2019 Subaru Outback (2.5i / 3.6R).

The Bilstein B6 Performance series is an ideal upgrade for drivers looking to improve the handling and stability of their Subaru Outback without changing the factory ride height. This front left shock absorber utilizes a specialized 46mm monotube design to provide consistent, fade-free performance that outperforms standard twin-tube dampers. By replacing the OE unit with Bilstein’s velocity-sensitive digressive piston technology, your vehicle gains improved composure and control across varying road conditions.

• 46mm monotube construction ensures heat dissipation and consistent damping
• Velocity-sensitive digressive piston reacts instantly to road inputs
• Application-specific tuning for the Subaru Outback platform
• Designed for use with OEM springs and factory mounting hardware
• Direct-fit replacement for stock height vehicles
• Manufacturer Part Number: 22-278616

Fits 2014-2023 Ram ProMaster 1500, 2500, and 3500 Base models.

The Bilstein B6 Performance strut assembly is an ideal upgrade for improving the handling and stability of your Ram ProMaster. These struts feature a 46mm monotube design, which provides superior heat dissipation and consistent, fade-free damping performance even under heavy loads or frequent commercial use. Unlike standard shocks, the B6 series utilizes a unique, velocity-sensitive digressive piston that reacts instantly to changing road conditions to maintain control and comfort.

Specifically tuned for the ProMaster chassis at factory ride height, this strut assembly is designed to work with your original equipment (OE) springs and mounting hardware for a straightforward installation. It offers a significant improvement in steering precision and load-carrying stability compared to worn factory units.

• 46mm monotube design ensures consistent, fade-free performance in all conditions
• Specific tuning for stock-height vehicles
• Utilizes velocity-sensitive, digressive valving for improved traction
• Compatible with OEM springs and mounting hardware
• Manufacturer Part Number: 22-249241

The Bilstein B1 Suspension Hardware Kit (MPN B-KT01-0000021) provides the essential mounting components required for a professional-grade suspension refresh or installation. Reusing corroded, fatigued, or one-time-use hardware can compromise the performance of new shocks and lead to unwanted noise or alignment issues.

These B1 components are engineered to meet or exceed original equipment standards, ensuring a precise fit and proper torque retention for critical suspension mounting points. Using fresh hardware during strut or shock replacement is a best practice that maintains the structural integrity and safety of the vehicle's damping system.

• Manufacturer Part Number: B-KT01-0000021
• Series: Bilstein B1 (Components)
• Ensures secure mounting for suspension components
• Engineered to OE specifications for fit and finish
• Recommended for use during shock or strut replacement

Fits 2010-2015 Chevrolet Camaro LS, LT, SS, Z/28, and ZL1.

The Bilstein B6 Performance damper (35-245728) is a high-pressure gas-charged upgrade to factory dampers, specifically engineered to be paired with original equipment (OE) springs. This 36mm monotube strut provides a significant increase in handling precision and lane stability without sacrificing daily ride quality or requiring a lowered suspension height.

By utilizing Bilstein’s signature gas-pressure technology and application-specific valving, these struts eliminate oil aeration and cavitation, maintaining consistent damping forces even under extreme loads. Whether you are daily driving a Camaro LS or pushing a ZL1 on the track, the B6 series delivers improved tire grip and vehicle control by replacing soft factory components with a rigorous, vehicle-specific performance setup.

• Series: B6 Performance
• Position: Front Left
• Body Design: 36mm Monotube
• Internal Design: Gas-Pressure
• Compatibility: Designed for use with factory springs
• Manufacturer Part Number: 35-245728

Fits select 2008-2013 BMW M3 and 1 Series M models. This Bilstein B6 Performance damper (MPN: 35-143338) provides a significant handling upgrade while maintaining your vehicle's factory ride height. Engineered specifically to be paired with original equipment springs, these 36mm monotube struts utilize application-specific valve settings to improve lane stability and grip without requiring a complete suspension overhaul.

Built with Bilstein gas-pressure technology, this front right strut assembly ensures consistent, fade-free performance even under extreme driving conditions. Every unit undergoes rigorous testing to meet or exceed OE standards, providing a precise fit and long-term durability for high-performance BMW chassis.

• 36mm monotube design for superior heat dissipation and structural rigidity
• Optimized for use with factory (series) springs
• Vehicle-specific ride tuning for balanced handling and improved safety
• Direct-fit replacement for the front right position
• Manufacturer Part Number: 35-143338

Vehicle Fitment

Fits select 2008-2013 BMW M3 and 2011 1 Series M.

The Bilstein B6 Performance damper is a premium monotube upgrade designed for drivers who want improved handling and stability without sacrificing the factory ride height. This front left 36mm strut (MPN 35-143321) is specifically valved to work with your vehicle's original equipment (OE) factory springs. By utilizing Bilstein's signature gas-pressure technology, this strut provides consistent, fade-free damping performance and enhanced lane stability under both daily driving and high-demand conditions.

• 36mm monotube design for superior heat dissipation and structural rigidity.
• Application-specific valve settings tuned to optimize the BMW M-chassis handling.
• Direct fitment for use with OE factory springs—no spring replacement required.
• Improved tire grip and steering response in extreme driving situations.
• Engineered and tested to meet or exceed OE quality standards.

Fits select 2017-2021 Audi A4, A4 allroad, A4 Quattro, A5 Quattro, A5 Sportback, RS5, S4, S5, and S5 Sportback models equipped with electronic suspension.

The Bilstein B6 Performance DampTronic shock absorber is a direct-fit performance upgrade specifically engineered for vehicles factory-equipped with electronic damping control. These front dampers allow you to maintain all active features and driver-selectable modes while significantly improving handling and chassis stability. By utilizing a monotube gas-pressure design and application-specific valving, the B6 DampTronic provides superior damping control and heat dissipation compared to standard OE components.

• Seamless plug-and-play integration with factory electronic suspension controls
• Maintains the ability to switch between comfort and sport settings via OE controls
• Monotube pressure technology for consistent, fade-free performance
• Optimized for use with original equipment factory springs
• Application-specific valving tested to meet or exceed OE standards
• Direct-fit replacement for the front factory damper
• Manufacturer Part Number: 26-296036

Fits 2015-2025 Ford F-150 4WD models including King Ranch, Lariat, Limited, Platinum, STX, Tremor, XL, and XLT. Specifically designed for vehicles with 0 to 2 inches of rear lift.

Bilstein B8 5160 remote reservoir shock absorbers provide a direct-fit solution for Ford F-150 owners seeking consistent damping performance during off-road use. The external remote reservoir significantly increases oil capacity compared to traditional shocks, allowing for superior heat dissipation and reducing shock fade during aggressive driving or towing. Each shock utilizes a 46mm monotube design with velocity-sensitive digressive valving, specifically tuned for the F-150 chassis to ensure immediate response to changing terrain.

These shocks are engineered for a clean installation, featuring a unique 360-degree swivel banjo hose fitting and a billet reservoir mount for a secure, low-profile fitment that maintains maximum clearance. The zinc-plated finish provides durable protection against corrosion and road debris.

• 46mm monotube gas-pressure construction for consistent, fade-free performance
• Remote reservoir increases oil volume for enhanced cooling and heat dissipation
• Self-adjusting deflective disc valving reacts instantly to surface changes
• 360-degree swivel banjo hose fitting allows for versatile reservoir placement
• Direct bolt-on fitment for 4WD models with 0-2 inches of rear lift
• Manufacturer Part Number: 25-311372

Fits 2003-2024 Toyota 4Runner, 2003-2009 Lexus GX470, and 2010-2023 Lexus GX460 with 0-2.5 inches of rear lift.

The Bilstein B8 8100 (DSA) is a high-performance, adjustable rear reservoir shock absorber designed for vehicles that demand superior heat management and ride control. Featuring a massive 60mm (2.65" OD) large-bore monotube design, this shock provides a significantly higher oil volume than OE units, ensuring consistent, fade-free performance during extended off-road use. The Dual Speed Adjustment (DSA) system allows for precise, independent tuning of both high and low-speed compression via external clicker knobs, letting you dial in the suspension for varying loads and terrain.

• Dual Speed Adjustment: External clickers for independent high and low-speed compression tuning.
• 60mm ID Monotube: Large-bore design with a digressive piston for exceptional comfort and control.
• Remote/Piggyback Reservoir: Application-specific reservoir configuration for increased cooling and travel.
• Premium Construction: Aerospace-quality billet components and a zinc-plated finish for durability.
• Direct Fit: Bolts to factory mounting points; designed specifically for lifted 4Runner and GX platforms.
• Manufacturer Part Number: 25-294101

Fits 2016-2023 BMW X1 and X2 models, including sDrive28i, xDrive28i, and M35i.

The Bilstein B6 Performance damper is a high-pressure monotube suspension upgrade designed specifically for drivers who want improved handling without changing their vehicle's ride height. These struts are engineered to be paired with your factory OE springs, offering a significant performance boost while maintaining the original suspension geometry. Each unit features application-specific valve settings that provide optimum grip and enhanced lane stability during both daily commutes and spirited driving.

Built with Bilstein gas-pressure technology, the B6 series replaces the more common twin-tube designs with a superior monotube setup for better heat dissipation and consistent damping force under load. Each strut is rigorously tested to ensure it meets or exceeds OE quality standards for safety and longevity.

• Manufacturer Part Number: 22-247056
• Series: B6 Performance
• Position: Front Right
• Design: Monotube Gas-Pressure
• Optimized for use with factory springs
• Vehicle-specific ride tuning

Fits 2003-2008 BMW Z4 2.5i, 3.0i, and 3.0si models (E85/E86).

The Bilstein B6 Performance damper is a direct-fit performance upgrade (MPN 24-348195) specifically designed to be paired with your vehicle's factory coil springs. These rear shocks are an ideal solution for drivers looking to improve handling and stability without the need to lower the vehicle or replace the entire suspension system. By utilizing application-specific valve settings, Bilstein has tuned these dampers to bring out the best chassis dynamics of the Z4 Roadster and Coupe.

Constructed with Bilstein’s world-renowned monotube gas-pressure technology, these shocks provide consistent, fade-free damping performance even under spirited driving conditions. The design ensures optimum grip and enhanced lane stability, providing a more composed feel in both daily commuting and extreme driving situations. Each damper is rigorously tested to meet or exceed OE quality standards for long-term durability and performance.

• Series: B6 Performance
• Design: Monotube Gas-Pressure
• Position: Rear
• Compatible with factory OE springs
• Direct-fit replacement for easy installation
• Manufacturer Part Number: 24-348195

Fits select 2003-2023 Lexus GX470 and Toyota 4Runner, FJ Cruiser, and Tacoma.

The Bilstein B8 6112 leveling kit is engineered for drivers looking to increase ground clearance, accommodate larger tires, and improve wheel travel for off-road performance. This suspension system features a large 60mm (2.65-inch) outer diameter body that holds a higher oil volume compared to factory shocks, ensuring consistent damping and cooling during extended use on rough terrain. The kit utilizes multiple snap-ring grooves in the shock body, allowing for adjustable spring seat positions to achieve 0 to 2.75 inches of front lift, depending on your specific vehicle application.

Constructed with a 60mm digressive piston, these shocks provide superior control and ride comfort by reacting instantly to surface changes. This complete front solution replaces the worn factory assembly with custom-matched cold wound coil springs and billet aluminum spring seats designed specifically for the weight and geometry of your light truck or SUV. This kit (MPN 47-309975) bolts directly to factory mounting points for a precise, vehicle-specific fit.

• 60mm shock body for increased oil capacity and thermal stability
• 60mm digressive piston improves damping control and ride quality
• Multiple snap-ring grooves provide 0-2.75 inches of front lift height
• Cold wound coil springs matched to the vehicle's spring rate requirements
• Billet aluminum spring seats for high-strength durability
• Includes (2) shocks, (2) coil springs, and (2) spring seats