Fits 2009-2013 Infiniti G37 (Base, IPL, Journey, Sport, and X) models.

The Cusco Type OS (Oval Shaft) front strut tower bar is engineered to enhance chassis rigidity by bridging the gap between the front shock towers. By tying these points together, the bar significantly reduces chassis flex during hard cornering, ensuring the suspension maintains its intended geometry for sharper turn-in and improved steering feedback.

• High-rigidity oval section aluminum shaft for a lightweight yet strong construction
• Steel end plates finished in Cusco signature blue for durability and corrosion resistance
• Direct bolt-on installation to factory mounting locations with no drilling required
• Reduces alignment changes under load for more predictable handling
• Manufacturer Part Number: 288 540 A

Fits select 2008-2011 Infiniti EX35 and G35 models.

The Cusco Power Brace Rear (MPN 288 492 R) is engineered to reinforce the rear chassis, significantly reducing structural flex during high-load cornering. By connecting critical stress points on the vehicle’s underbody, this brace allows the suspension to maintain its intended geometry, resulting in more predictable handling and sharper steering response.

Designed for enthusiasts who demand better stability on both the street and track, this Power Brace provides a more rigid platform without sacrificing ride quality. It is a direct bolt-on solution that utilizes existing mounting points for a secure and straightforward installation.

• Increases chassis rigidity to minimize body flex
• Improves suspension feedback and steering precision
• Direct bolt-on design for a precise fit on factory mounting points
• Manufacturer Part Number: 288 492 R

Fits 2008-2013 Infiniti G37 Coupe (CKV36).

The Cusco Power Brace Front Side (288 492 FS) is designed to increase the structural rigidity of your chassis, minimizing unibody flex during aggressive cornering and heavy braking. By reinforcing the front section of the CKV36 platform, this brace helps maintain proper suspension geometry under load, providing more direct steering feedback and improved overall handling stability.

• Reinforces the chassis to prevent twisting and flex for sharper handling response
• Engineered for a precise bolt-on fitment using existing factory mounting points
• Constructed from high-strength steel with a durable signature Cusco blue finish
• Ideal for both street performance and track-oriented CKV36 builds
• Manufacturer Part Number: 288 492 FS

Fits Nissan Juke (YF15) 2WD models. Please note: This component is specifically engineered for the front-wheel-drive (2WD) chassis and will not fit AWD variants.

The Cusco 16mm Rear Sway Bar is designed to significantly reduce body roll and improve the cornering stability of your Nissan Juke. By increasing the torsional rigidity of the rear suspension, this anti-roll bar helps maintain a flatter cornering attitude and more consistent tire contact patches during spirited driving. This upgrade is ideal for drivers looking to sharpen steering response and achieve a more balanced, neutral handling profile without compromising ride comfort.

• Manufacturer Part Number: 271 311 B16
• Diameter: 16mm
• Position: Rear
• Fitment: Nissan Juke (YF15) 2WD chassis only
• Finish: Signature Cusco Blue powder coat for corrosion resistance

Fits select Nissan GT-R and 370Z/Fairlady Z models. This Cusco Swivel Joint Tow Hook provides a reliable, high-strength recovery point designed for both competitive track use and street styling.

Constructed from heavy-duty steel and finished in Cusco’s signature red powder coat, this front tow hook features a swivel mechanism that allows the ring to fold 90 degrees when not in use. This design helps prevent protrusion hazards while ensuring your vehicle meets track safety requirements for accessible recovery points. The unit is engineered to bolt directly into the factory mounting location for a secure, straightforward installation.

• High-strength steel construction for reliable recovery
• 90-degree swivel joint design folds when not in use
• Durable red powder-coated finish for high visibility and corrosion resistance
• Designed to meet JAF (Japan Automobile Federation) safety standards
• Bolts directly to the front factory tow point
• Manufacturer Part Number: 252 017 F

Fits 1984-1989 Nissan 300ZX Base, Turbo, and 2+2 models.

The Cusco Type OS Rear Strut Tower Bar is designed to eliminate chassis flex at the rear shock towers, a common issue in the Z31 chassis during spirited driving. By tying the towers together, this brace maintains precise suspension geometry and improves rear-end stability under heavy cornering loads.

• Series: Type OS (Oval Shaft)
• Material: High-vacuum extruded aluminum shaft with a ribbed internal construction for maximum rigidity.
• Finish: Polished aluminum center bar with heavy-duty steel end plate brackets finished in Cusco Blue.
• Fitment: Direct bolt-on installation to factory mounting points; designed specifically for the 1984-1989 Z31 300ZX.
• Manufacturer Part Number: 248 541 A

This strut bar is an essential upgrade for owners looking to sharpen steering response and reduce unibody fatigue in their classic Z-car.

Fits 1984-1989 Nissan 300ZX (Z31) Base, Turbo, and 2+2 models.

The Cusco Type OS Front Strut Tower Bar is engineered to reduce chassis flex by reinforcing the connection between the front shock towers. By minimizing tower deflection during cornering, this bar improves steering response and helps maintain consistent suspension geometry under load. The Type OS (Oval Section) design features a high-strength aluminum shaft with a hollow core, offering an ideal balance of weight savings and torsional rigidity.

This reinforcement bar is a direct bolt-on component that utilizes factory mounting points, requiring no drilling or permanent modification. The end plates are constructed from heavy-duty steel and finished in Cusco's signature blue powder coating for long-term durability and a professional engine bay appearance.

• Manufacturer Part Number: 248 540 A
• Shaft Material: Lightweight tubular aluminum with oval cross-section
• Bracket Material: High-strength steel finished in Cusco Blue
• Location: Front Strut Tower
• Design: Type OS (Oval Shaft)
• Installation: Direct bolt-on to OEM mounting points

Fits 1979-1983 Nissan 280ZX Base, GL, 2+2, and Turbo models (S130 chassis).

The Cusco Type AS Rear Strut Tower Bar is engineered to reinforce the rear suspension mounting points on the S130 chassis, significantly reducing the chassis flex that occurs during aggressive cornering. By bridging the strut towers, this bar maintains consistent suspension geometry, providing more predictable handling and improved rear-end stability for both street and track applications.

The Type AS (Aluminum Shaft) features a lightweight, high-strength polished aluminum construction. It is designed as a direct-fit upgrade, bolting into the factory rear strut tower locations without the need for extensive modification. This bar is a functional addition for enthusiasts looking to sharpen the steering response and structural feel of their vintage Datsun/Nissan Z-car.

• Product Line: Type AS (Aluminum Shaft)
• Position: Rear
• Material: Polished Aluminum
• Chassis Compatibility: HS130 / GS130 / S130
• Manufacturer Part Number: 247 511 A

Fits all 1979-1983 Nissan 280ZX models including Base, GL, and Turbo (HS130/GS130 chassis).

The Cusco Type ST front strut tower bar is a fundamental chassis upgrade designed to eliminate strut tower flex during hard cornering. By physically linking the tops of the front shock towers, this bar maintains consistent suspension geometry, providing more predictable handling and sharper steering response for your S130 chassis. Constructed from high-tension steel, the Type ST is built for durability and structural integrity under high-load driving conditions.

• Increased Rigidity: Minimizes chassis twist to keep the tire contact patch optimal during cornering.
• Direct Bolt-On: Engineered to utilize factory mounting points for a straightforward installation with standard hand tools.
• Steel Construction: High-strength steel shaft provides superior stiffness compared to standard aluminum bars.
• Classic Aesthetics: Features the signature Cusco blue powder-coated steel brackets for corrosion resistance and a performance look.

• Manufacturer Part Number: 247 510 A
• Position: Front
• Series: Type ST (Steel)
• Chassis Codes: HS130 / GS130

Fits 1970-1978 Nissan 240Z, 260Z, and 280Z S30-series chassis models.

The Cusco Type OS Rear Strut Tower Bar (MPN 246 541 A) is engineered to reduce chassis flex by tying the rear shock towers together, providing a more rigid suspension platform. By minimizing body distortion under cornering loads, this bar helps maintain optimal tire contact patches and provides more predictable handling characteristics for your classic Z-car. The Type OS features a lightweight, high-strength oval aluminum shaft that offers superior torsional rigidity compared to standard round bars.

• Materials: High-polish tubular aluminum shaft with an oval cross-section.
• End Plates: Precision-stamped steel mounting plates finished in iconic Cusco Blue.
• Installation: Direct bolt-on design using factory mounting points; no welding required.
• Performance: Enhances steering precision and chassis feedback by bracing the rear shock towers.
• Manufacturer Part Number: 246 541 A

Authoritative Fitment:

• 1970-1973 Nissan 240Z Base
• 1974-1975 Nissan 260Z Base & 2+2
• 1975-1978 Nissan 280Z Base & 2+2

Fits 1970-1978 Nissan 240Z, 260Z, and 280Z (Base and 2+2 models).

The Cusco Type OS Front Strut Tower Bar is engineered to bridge the gap between the front strut towers, significantly reducing chassis flex during hard cornering. By reinforcing the structural integrity of the S30/S31 chassis, this bar helps maintain consistent suspension geometry and improves steering response and feedback.

Featuring the iconic Type OS design, the bar utilizes a high-rigidity oval-section aluminum shaft that provides a high strength-to-weight ratio. The end plate brackets are finished in Cusco’s signature blue and are designed to bolt directly to the factory mounting points for a straightforward installation.

• Manufacturer Part Number: 246 540 A
• Position: Front
• Shaft Material: High-rigidity aluminum
• Shaft Profile: Type OS (Oval Section)
• Installation: Direct bolt-on to factory strut towers

Fits 1968-1981 Nissan 510 Base models.

The Cusco Round 20mm Strut Bar is engineered to increase chassis rigidity and improve steering precision by connecting the strut towers. By reducing tower flex during hard cornering and over uneven surfaces, this bar helps maintain proper suspension geometry for more predictable handling and better tire contact.

Constructed with a 20mm diameter round aluminum shaft, this strut tower brace offers a lightweight yet effective solution for vintage Nissan enthusiasts looking to sharpen their vehicle's driving dynamics. The bar features Cusco's signature blue steel end plates for a secure, bolt-on installation using factory mounting points.

• Manufacturer Part Number: 235 510 A
• Shaft Type: 20mm Round
• Material: High-strength aluminum shaft with steel brackets
• Improves chassis stiffness and steering response
• Designed for front-end reinforcement

Fits 1993-2002 Nissan Skyline R33 and R34 (RWD models only; excludes GTR and AWD variants).

Enhance your chassis rigidity and steering response with the Cusco Type OS Front Strut Tower Bar. This high-performance brace is designed to connect the tops of your front strut towers, effectively reducing chassis flex during hard cornering and aggressive driving. By maintaining alignment geometry under load, it provides more predictable handling and improved tire contact.

The Type OS (Oval Shaft) features a lightweight, high-vacuum die-cast aluminum bar with a hollow oval cross-section for maximum structural integrity without unnecessary weight. The shaft is finished in a high-polish coating, while the vehicle-specific steel end plates are finished in iconic Cusco Blue powder coat for lasting durability and corrosion resistance.

• Shaft Type: Type OS (Oval Section)
• Material: High-strength Aluminum shaft with Steel brackets
• Finish: Polished shaft / Cusco Blue powder-coated brackets
• Installation: Direct bolt-on to factory mounting points; no drilling required
• Manufacturer Part Number: 232 540 A

Fits Nissan Skyline GT-R (BNR32 and BCNR33).

Improve your vehicle's handling and cornering stability with the Cusco 24mm Front Sway Bar. This suspension upgrade is designed to reduce body roll by increasing the roll stiffness of the front suspension. By limiting chassis lean during high-speed cornering, it helps maintain a flatter tire contact patch, providing more consistent grip and sharper steering response.

Constructed for durability and precision, this 24mm bar replaces the factory unit and is engineered to work with the GT-R's chassis dynamics. It is an essential modification for enthusiasts looking to eliminate the "boaty" feel of the stock suspension without sacrificing significant ride quality. The bar typically installs using factory mounting locations for a direct-fit solution.

• Position: Front
• Diameter: 24mm
• Reduces body roll and improves lateral stability
• Enhances steering turn-in and predictable handling
• Manufacturer Part Number: 231 311 A

Fits 1989-1994 Nissan Skyline R32 (BNR32 / HCR32) models. Keep your intake system free of oil vapor and carbon buildup with the Cusco 3L Competition Oil Catch Tank. High-performance turbocharged engines like the RB20DET, RB25DET, and RB26DETT generate significant blow-by gas; this tank captures oil mists and moisture before they can re-enter the combustion chamber, protecting your engine's efficiency and preventing octane dilution.

• Vehicle Fitment: 1989-1994 Nissan Skyline R32 (GTS-t and GT-R)
• Capacity: 3.0 Liters
• Construction: Lightweight, durable aluminum with a polished finish
• Part Number: 231 011 A
• Function: Captures oil blow-by to prevent intake manifold and valve gumming

This kit includes the 3-liter tank and necessary hardware for installation, providing a critical upgrade for both high-load track use and street-tuned Skylines where oil control is paramount.

Fits 1989-1998 Nissan 240SX Base, LE, SE, and XE models across S13, S14, and S15 chassis.

Secure your drivetrain with the Cusco OEM Shape HD Rubber Engine Mount Set. Designed for drivers who want to eliminate excessive engine movement without the harshness of solid mounts, these high-density rubber mounts provide a significant increase in stiffness over worn factory units. By minimizing engine pitch and roll, these mounts improve throttle response and gear-shifting precision, especially during spirited driving or track use.

Cusco engineered these mounts to follow the original equipment (OE) shape, ensuring a direct bolt-on installation into the factory mounting points without the need for modification. This set includes two mounts to complete the engine-to-subframe installation.

• Material: High-density (HD) reinforced rubber
• Configuration: 2-piece engine mount set
• Installation: Direct bolt-on OEM shape
• Manufacturer Part Number: 223 910 A
• Applications: Fits S13, S14, and S15 chassis

Fits 1995-1998 Nissan 240SX (S14) Base, LE, and SE models.

The Cusco Type OS (Oval Shaft) Front Strut Tower Bar is a precision-engineered chassis reinforcement designed to eliminate front-end flex on the S14 chassis. By connecting the shock towers, this bar stabilizes suspension geometry under heavy cornering loads, delivering more consistent tire contact and sharper steering response. This is a vital upgrade for drivers looking to improve handling precision in both street and track environments.

The Type OS features a high-tension aluminum oval shaft with a ribbed internal construction for maximum rigidity. The end plate brackets are made from steel and finished in Cusco’s iconic metallic blue. This unit is designed for a straightforward, bolt-on installation using the factory shock tower mounting points.

• Series: Type OS (Oval Shaft)
• Position: Front
• Material: Aluminum bar with steel end plates
• Installation: Direct bolt-on
• Manufacturer Part Number: 222 540 A

Fits 1989-1994 Nissan 240SX (S13) models with SR20DET engines.

The Cusco Type OS Front Strut Tower Bar is a fundamental chassis upgrade designed to eliminate front-end flex. By physically bracing the two strut towers together, this bar prevents the chassis from twisting under heavy cornering loads. This ensures that the suspension geometry remains consistent, providing more predictable handling and sharpened steering response for the S13 chassis.

Featuring an oval-section aluminum shaft, the Type OS design offers high torsional rigidity while maintaining a slim profile for engine bay clearance. The bar is supported by high-strength steel end plates, finished in Cusco's signature blue. This is a direct bolt-on component that installs onto factory mounting points with standard hand tools.

• Series: Type OS (Oval Shaft)
• Placement: Front Strut Towers
• Material: Aluminum Bar with Steel End Plates
• Compatibility: Specifically fits SR20DET engine configurations
• Manufacturer Part Number: 221 540 A

Fits 1989-1994 Nissan 240SX (S13) Base, LE, SE, and XE models.

The Cusco Type OS-T Rear Strut Tower Bar is a specialized triangulation upgrade designed to further stiffen the rear chassis of the S13 platform. This "Triangle" version (OS-T) is engineered to work as an add-on for the Type OS rear strut bar, connecting the main bar to the trunk floor. By creating a three-point brace, it significantly reduces chassis flex and body roll during high-load cornering, ensuring the suspension maintains its intended geometry for better rear-end stability and feedback.

• Manufacturer Part Number: 220 544 A
• Position: Rear
• Series: Type OS-T (Triangulated Add-on)
• Material: High-strength aluminum bar with steel end plate brackets
• Installation: Replaces or adds to rear strut tower hardware for improved chassis rigidity

Fits 1989-1994 Nissan 240SX (S13) Base, LE, SE, and XE models.

The Cusco Type OS Rear Strut Tower Bar is engineered to increase chassis rigidity by bracing the rear shock towers. By significantly reducing chassis flex during aggressive cornering and spirited driving, this bar helps maintain consistent suspension geometry for improved handling response and predictability. The Type OS (Oval Shaft) series is known for its high-strength, lightweight design, featuring a polished aluminum oval-section shaft that provides superior resistance to torsion.

This performance brace features steel end plate brackets finished in Cusco's signature blue. It installs directly to the factory mounting points with no specialized tools required, making it an essential upgrade for S13 owners looking to sharpen their vehicle's balance.

• Manufacturer Part Number: 220 541 A
• Position: Rear
• Series: Type OS (Oval Shaft)
• Material: Polished Aluminum Shaft with Steel End Plates
• Fitment: 1989-1994 Nissan 240SX (All Trims)

Fits 1989-1998 Nissan 240SX (Base, LE, SE, XE) with S13/S14 chassis and CA18DET or SR20DET engine configurations.

The Cusco Type OS Front Strut Tower Bar is designed to reduce chassis flex and improve steering precision by bridging the gap between the vehicle's shock towers. By reinforcing the front suspension mounting points, this bar helps maintain consistent suspension geometry during hard cornering and spirited driving, ensuring more predictable handling and better tire contact.

• High-rigidity oval section aluminum shaft (Type OS) for maximum strength with a low profile
• Corrosion-resistant clear-coated aluminum finish for long-lasting aesthetics
• Steel end plate brackets finished in iconic Cusco Blue
• Direct bolt-on installation to factory mounting points with no drilling required
• Manufacturer Part Number: 220 540 A

Each bar is precision-engineered to provide a perfect fit under the hood of the S-Chassis, clearing factory components while providing a significant upgrade in structural integrity.

Fits 1989-1994 Nissan S13 (240SX, Silvia, and 180SX) models equipped with a factory sunroof.

The Cusco Chromoly Roll Cage (220 261 ES) provides critical chassis reinforcement and occupant protection while minimizing weight. Constructed from high-tensile 4130 chromoly steel, this 6-point cage is approximately 33% lighter than standard cold-drawn seamless (CDS) steel cages, making it the ideal choice for track-focused S13 builds where maintaining a low center of gravity and reducing overall mass are priorities.

This specific configuration is precision-engineered to clear the factory sunroof mechanism, allowing for structural improvement without requiring the removal of interior creature comforts. The cage is finished in Cusco's signature blue powder coating for long-lasting corrosion resistance and a professional aesthetic.

• Material: Lightweight 4130 Chromoly Steel
• Configuration: 6-Point Roll Cage
• Compatibility: S13 Chassis with Sunroof
• Tube Diameter: 40mm
• MPN: 220 261 ES

Note: This is a special order item. Please confirm vehicle specifications before ordering as cancellations are not permitted.

Fits 1989-1994 Nissan 240SX (Base, LE, SE, and XE).

The Cusco Oil Catch Can is an essential engine health upgrade for the S13 chassis, designed to capture oil vapor and moisture from the crankcase ventilation system before it reaches the intake manifold. By trapping these contaminants, the system prevents carbon and sludge buildup on the intake valves and inside the intake tract, ensuring your engine breathes cleaner air and maintains optimal combustion efficiency.

• Direct-fit design engineered specifically for the 1989-1994 Nissan 240SX S13 chassis
• Prevents oil and blow-by residue from coating intake piping and intercooler cores
• Features a high-quality polished finish for a professional and clean engine bay appearance
• Includes vehicle-specific mounting hardware and hoses for a secure installation
• Manufacturer Part Number: 220 009 A

Fits select 1985-1990 Nissan Sentra and Pulsar NX models.

The Cusco Type ST Front Strut Tower Bar (212 510 A) is an essential upgrade for drivers looking to increase chassis rigidity and steering precision. By bridging the gap between the front strut towers, this brace prevents chassis flex under heavy load, ensuring your suspension maintains its intended geometry during hard cornering. Engineered specifically for the RNN14 Pulsar and B12 Sentra chassis, this bar provides a direct, bolt-on solution that connects to factory mounting points without modification.

• Series: Type ST
• Position: Front
• Chassis Compatibility: 1985-1990 Nissan Sentra and Pulsar NX
• Construction: High-strength steel bar for maximum durability
• Finish: Signature Cusco Blue
• Part Number: 212 510 A
• Ordering Note: This is a special order product and is non-cancellable once the order is placed.

Fits 1971-1973 Datsun 1200 Coupe (B110) and Nissan Sunny models.

The Cusco Type-ST Front Strut Tower Brace is engineered to eliminate chassis flex at the vehicle's most critical suspension mounting points. By tying the shock towers together, this bar prevents the body from twisting under cornering loads, ensuring your alignment remains consistent and your tires maintain a more uniform contact patch. This result is sharper turn-in, improved steering feedback, and enhanced overall chassis predictability during spirited driving.

• High-tensile steel construction for maximum rigidity and durability
• Type-ST design optimized for classic chassis geometry
• Reduces front-end suspension deflection and body roll
• Direct bolt-on installation to factory shock tower mounting points
• Manufacturer Part Number: 204 510 A

Fits 2023-2024 Toyota GR Corolla (GZEA14H).

The Cusco Street Zero-A coilover system offers a comprehensive suspension solution for the GR Corolla, balancing street-friendly ride quality with track-capable handling. This kit features a 40-way damping adjustment mechanism, allowing for precise fine-tuning of the shock absorbers to match specific driving conditions and tire setups. By utilizing a full-tap height adjustment system, you can set your preferred ride height without affecting the spring preload or suspension stroke.

Designed for enthusiasts who prefer to retain certain factory components, this specific Street Zero-A kit (MPN: 1H1 61N CN) is engineered to be used without rear upper mounts, meaning it utilizes the original factory mounts to maintain a level of NVH (noise, vibration, and harshness) control suitable for daily use while significantly upgrading damping performance.

• 40-way needle valve damping adjustment
• Full-tap ride height adjustment for independent stroke and height settings
• Twin-tube shock design for comfortable street performance
• Includes front upper mounts
• Designed for use with factory rear upper mounts
• Manufacturer Part Number: 1H1 61N CN

Fits 2023+ Toyota GR Corolla (GZEA14H).

The Cusco Power Brace Seat Rail set is designed to increase chassis rigidity by reinforcing the connection between the seat rails and the vehicle floor. These braces effectively minimize floor pan flex during high-G cornering and aggressive driving maneuvers, providing a more stable mounting platform for the front seats. By reducing chassis distortion in the cabin area, drivers experience improved steering response and more precise feedback from the road.

• Manufacturer Part Number: 1H1 492 SP
• Product Series: Power Brace Seat Rail
• Fitment: 2023+ Toyota GR Corolla (GZEA14H)
• Quantity: Set of 2 (Left and Right)
• Installation: Direct bolt-on to factory mounting points
• Construction: High-strength steel designed for maximum structural integrity

Fits 2023-2024 Toyota GR Corolla (GZEA14H).

The Cusco Power Brace Rear Cross Member is designed to increase chassis rigidity by reinforcing the rear subframe. By minimizing flex in the rear cross member during high-load cornering and aggressive driving, this brace helps maintain consistent suspension geometry, leading to more predictable handling and improved rear-end stability.

Fabricated from high-strength steel and finished in Cusco's signature blue powder coating for corrosion resistance, this brace provides a durable solution for track enthusiasts and spirited street drivers alike. It is engineered for a direct bolt-on installation, utilizing factory mounting points to ensure a precise fit without the need for drilling or permanent modifications.

• Reduces chassis distortion and rear subframe flex
• Enhances steering response and rear-end traction
• High-strength steel construction for maximum durability
• Signature Cusco blue powder-coated finish
• Direct bolt-on design using factory mounting locations
• Manufacturer Part Number: 1H1 492 R

Fits 2023-2024 Toyota GR Corolla (GZEA14H).

The Cusco Power Brace Front Cross Member is engineered to increase chassis rigidity by reinforcing the front subframe assembly. By tying together critical structural points, this brace minimizes body flex under heavy cornering loads, helping to maintain accurate suspension geometry and improving overall steering precision and front-end feedback.

• Increases chassis stiffness for improved handling and predictable cornering
• High-strength steel construction designed for high-stress automotive environments
• Finished in signature Cusco blue powder coat for long-term corrosion resistance
• Direct bolt-on design utilizes existing factory mounting points for a precise fit
• Includes all necessary hardware for installation
• Manufacturer Part Number: 1H1 492 F

Fits 2023-2024 Toyota GR Corolla models (GZEA14H).

Improve the cornering performance and stability of your GR Corolla with the Cusco 26mm Rear Sway Bar. By increasing the torsional rigidity of the rear suspension, this sway bar effectively reduces body roll during high-speed cornering and quick directional changes without significantly compromising ride quality. It is a vital upgrade for drivers looking to neutralize understeer and achieve a more balanced, neutral handling characteristic on both the street and the track.

Constructed from high-tensile solid steel, this bar is designed to withstand the stresses of spirited driving. It features the signature Cusco Blue powder-coated finish for superior corrosion resistance and long-term durability. This component is a direct replacement for the factory unit and is engineered to utilize the original mounting locations for a straightforward installation.

• Diameter: 26mm
• Construction: Solid Steel
• Finish: Cusco Blue Powder Coat
• Position: Rear
• Manufacturer Part Number: 1H1 311 B26