Fits 2004-2021 Subaru WRX STI (GDB, GRB, GVB, and VAB chassis) equipped with a 6-speed manual transmission.

The Cusco Drive Shaft Heat Shield is a critical upgrade for track-driven and high-performance Subaru WRX STIs. Located on the rear left side, the inner CV axle boot sits in close proximity to the exhaust piping. Excessive radiant heat can cause the factory axle grease to liquefy and the rubber boot to become brittle, eventually leading to a failure that can spray grease onto the hot exhaust. This steel shield acts as a dedicated thermal barrier, significantly reducing the heat soak reaching the boot to maintain drivetrain integrity.

• Material: Durable steel construction for high-temperature resistance
• Position: Rear Left Side
• Compatibility: Designed specifically for 6-speed manual transmission models
• Installation: Direct bolt-on fitment using existing mounting points
• Manufacturer Part Number: 6A1 047 R

Fits 2000-2021 Subaru WRX STI (GDB, GRB, GVB, and VAB chassis) equipped with the 6-speed manual transmission.

Protect your drivetrain from radiant exhaust heat with the Cusco Steel Drive Shaft Heat Shield. Designed specifically for the front right side, this shield addresses a common issue in performance-driven Subarus: overheating the inner CV boot. High temperatures from the nearby exhaust system can cause CV grease to break down or the boot itself to crack, leading to premature joint failure.

Constructed from durable steel, this heat shield acts as a thermal barrier to maintain lower operating temperatures for the drive shaft components, ensuring long-term reliability on both the street and the track. It installs using existing mounting points for a secure, vehicle-specific fit.

• Manufacturer Part Number: 6A1 047 F
• Position: Front Right Side
• Material: High-strength Steel
• Compatibility: 6-Speed Manual Transmission (6MT) models only
• Fitment: Subaru WRX STI 2000-2021 (GDB/GRB/GVB/VAB)

Fits 2008-2017 Subaru Impreza, WRX, and STI models (GR/GV/VA chassis).

The Cusco Intercooler Protection Grill Kit is engineered to safeguard your vehicle's top-mount intercooler (TMIC) from road debris, large insects, and pebbles that can flatten cooling fins and reduce thermal efficiency. This kit provides a critical layer of defense for your forced induction system without obstructing essential airflow.

Built for durability and a precise fit, the kit features a lightweight aluminum outer frame finished in signature Cusco Blue. The black mesh insert is designed to withstand high under-hood temperatures and high-velocity impacts. It integrates seamlessly with the factory intercooler shroud for a clean, professional appearance and reliable protection during spirited driving or track sessions.

• Prevents intercooler fin damage from road debris and rocks
• Signature Cusco Blue aluminum frame with durable black mesh
• Maintains maximum airflow for cooling efficiency
• Installs to factory mounting points on the intercooler shroud
• Manufacturer Part Number: 6A1 035 A

Fits 2015 Subaru Impreza USDM models (VA Chassis).

The Cusco Oil Catch Tank is engineered to capture oil mist, moisture, and combustion byproducts before they can be recirculated into your engine's intake tract via the PCV system. By isolating these contaminants, this tank prevents significant carbon buildup on intake valves and internal manifold surfaces, ensuring your engine maintains consistent air-fuel ratios and optimal performance levels.

• Prevents oil and sludge accumulation in the intake manifold and intercooler
• Reduces valve carbon deposits to maintain engine efficiency and octane levels
• Application-specific design for a precise fit within the VA chassis engine bay
• Integrated level indicator for easy maintenance and monitoring
• High-quality construction for long-term durability under high-heat conditions
• Manufacturer Part Number: 6A1 009 A

Fits 2018+ Subaru Crosstrek and Impreza (GT6/GK6 2.0L 2WD) models.

The Cusco OS-Type Rear Strut Tower Brace is designed to increase chassis rigidity by connecting the rear suspension towers. This bridge minimizes chassis flex during cornering, ensuring the suspension maintains its intended geometry for more predictable handling and improved steering response. The Type OS (Oval Shaft) features a high-tension lightweight aluminum bar with a polished finish for a clean look under the hatch.

Each brace includes steel end plates finished in signature Cusco blue, designed for a precise fit on the factory mounting points. This is a direct bolt-on upgrade that requires no welding or major fabrication.

• Series: Type OS (Oval Shaft)
• Position: Rear
• Material: Polished Aluminum bar with Steel brackets
• Installation: Bolt-on to factory locations
• Fits: 2.0L 2WD models
• Manufacturer Part Number: 699 541 A

Fits select 2018+ Subaru Crosstrek and Impreza models (GT6/GK6 2.0L 2WD).

The Cusco Type OS Front Strut Tower Brace is designed to improve the handling and chassis rigidity of your vehicle by connecting the front strut towers. By creating a solid link between the towers, this brace reduces chassis flex during aggressive cornering and high-speed maneuvers, ensuring your suspension geometry remains consistent for more precise steering response.

• Construction: Lightweight, high-rigidity oval section aluminum bar with a polished finish.
• End Plates: Durable steel brackets finished in signature Cusco Blue for corrosion resistance and engine bay aesthetics.
• Design: Type OS (Oval Shaft) profile offers a balance of strength and clearance within the engine compartment.
• Installation: Direct bolt-on design using factory mounting points; no drilling or welding required.
• MPN: 699 540 A

Whether you are daily driving or participating in spirited weekend runs, this strut tower bar provides a noticeable improvement in front-end feedback and overall vehicle stability.

Fits 2012 Subaru Forester 2.0XT (SJG).

The Cusco Type OS Front Strut Tower Bar is engineered to reduce chassis flex by reinforcing the structural integrity between the front strut towers. By tying the suspension mounting points together, this bar helps maintain consistent suspension geometry during aggressive cornering, resulting in improved steering precision and a more predictable handling profile. The Type OS is Cusco's most popular strut bar series, balancing weight, rigidity, and aesthetic appeal for daily drivers and track enthusiasts alike.

• Construction: High-strength oval section aluminum shaft for optimal torsional rigidity.
• Finish: Features a polished aluminum shaft with signature Cusco Blue steel end plate brackets for corrosion resistance and a clean engine bay look.
• Design: Type OS (Oval Shaft) profile designed for maximum clearance and strength.
• Installation: Direct bolt-on fitment to factory mounting points with no specialized tools required.
• Manufacturer Part Number: 697 540 A

Fits 2011+ Subaru Impreza and XV (GP7/GJ7) 4WD models with the 2.0L naturally aspirated engine.

The Cusco Type-OS Rear Strut Tower Bar is an essential chassis upgrade designed to increase structural rigidity by connecting the rear shock towers. By minimizing chassis flex during cornering and spirited driving, this brace ensures the suspension maintains its intended geometry, resulting in improved steering precision and predictable handling.

• High-strength oval-section tubular aluminum shaft for maximum rigidity and weight savings
• Polished finish on the main bar for a professional engine bay or trunk aesthetic
• Steel end-plate brackets finished in signature Cusco Blue
• Simple bolt-on installation utilizing existing factory mounting points
• Designed specifically for the GP7/GJ7 chassis architecture
• Manufacturer Part Number: 694 541 A

Fits 2013 Subaru XV Crosstrek (2.0L).

The Cusco Type OS Front Strut Tower Bar is engineered to bridge the gap between the front strut towers, significantly reducing chassis flex during cornering. By reinforcing the front suspension mounting points, this brace ensures the suspension geometry remains consistent under load, providing sharper steering response and increased stability for your vehicle.

• Manufacturer Part Number: 694 540 A
• Series: Type OS (Oval Shaft)
• Construction: High-grade tubular aluminum shaft with steel end plates
• Finish: Polished aluminum bar with Cusco Blue powder-coated brackets
• Installation: Direct bolt-on to factory strut tower locations; no drilling required
• Reduces chassis deflection for improved handling and feedback

Fits select 2011-2017 Subaru BRZ, Impreza WRX, and XV Crosstrek, 2013-2016 Scion FR-S, and 2017 Toyota 86.

The Cusco Swivel Joint Rear Tow Hook is a functional recovery point designed for both track-side utility and street safety. This folding tow hook features a heavy-duty swivel mechanism that allows the ring to be positioned at 0 or 90 degrees. When not in use, the ring folds flat to minimize the risk of catching on clothing or equipment while maintaining a clean aesthetic. Finished in high-visibility red, it ensures quick identification for track marshals and recovery crews.

• Manufacturer Part Number: 693 017 R
• Position: Rear
• Swivel joint design folds 90 degrees
• Bolts directly into factory tow hook locations
• High-strength steel construction

Vehicle Fitment:

• 2013-2016 Scion FR-S (Base)
• 2013-2017 Subaru BRZ (Limited, Premium, Series.Blue, Series.HyperBlue)
• 2011-2014 Subaru Impreza WRX
• 2013 Subaru XV Crosstrek (Limited, Premium)
• 2017 Toyota 86 (Base, Special Edition)

Ensure your vehicle is track-ready with the Cusco Front Swivel Joint Tow Hook. Engineered for functional recovery and a race-inspired aesthetic, this heavy-duty tow hook features a 90-degree folding swivel joint. The design allows the hook to stay flush against the bumper when not in use, minimizing the risk of damage while remaining easily accessible for emergency towing or track extraction.

This front-mounted hook is specifically designed for the Subaru Impreza GRB (Applied C) and GVB chassis. For the GRB Applied C models, please note that the factory tow hook cover must be modified to ensure proper fitment and clearance.

• Manufacturer Part Number: 693 017 F
• Position: Front
• Design: 90-degree folding swivel joint
• Compatibility: Subaru Impreza GRB (Applied C only) and GVB
• Installation Requirement: Tow hook cover modification required for GRB Applied C

Enhance the handling precision and ride quality of your Subaru Impreza WRX STI (GRB/GVB) with Cusco Touring-A front shock absorbers. Designed for drivers who demand more performance without the harshness of a full coilover conversion, these shocks provide the flexibility to tune your suspension for various road conditions.

The Touring-A series features a 40-way adjustment dial located at the top of the shock, allowing for rapid changes to the damping force. This system lets you transition from a comfortable street setting for daily commuting to a firmer, more controlled response for spirited driving or track days. These shocks utilize a twin-tube design for consistent damping and are engineered to work seamlessly with factory springs and top mounts.

• 40-way adjustable damping for fine-tuned suspension control
• Twin-tube construction for improved reliability and ride comfort
• Direct-fit replacement for factory front shocks; compatible with OE springs
• Uses factory mounting points for a bolt-on installation
• Manufacturer Part Number: 692 65T FRN

Fits 2008-2014 Subaru Impreza WRX and WRX STi (GRB, GRF, GVB, and GVF chassis).

The Cusco Hybrid Type Front Strut Tower Bar (692 542 A) is engineered to bridge the gap between high-performance chassis rigidity and daily driving refinement. Unlike conventional solid strut braces, this hybrid design incorporates a specialized vibration-damping bush within the aluminum shaft. This allows the bar to effectively minimize strut tower flex during hard cornering while absorbing high-frequency road noise and vibrations that typically transfer into the cabin.

• Precision Handling: Increases front-end rigidity to provide more direct steering feedback and predictable turn-in.
• Hybrid Construction: Features a high-strength aluminum bar paired with Cusco's signature blue steel end plates and an internal rubber damping bush.
• Direct Bolt-On: Engineered for a perfect fit using factory mounting points with no permanent modifications required.
• Optimized Clearance: Designed specifically for the GR and GV chassis engine bays to clear the intake manifold and other OE components.
• MPN: 692 542 A

Ideal for enthusiasts who want to sharpen their Subaru's handling dynamics without sacrificing the ride quality expected of a street-driven vehicle.

Fits 2008-2013 Subaru Impreza and Legacy models including WRX and WRX STI (GH8, GRB, GVB, BR9, BM9 chassis codes).

The Cusco Type OS (Oval Shaft) Rear Strut Tower Bar is engineered to reinforce the vehicle chassis by bridging the rear strut towers. This reinforcement reduces chassis flex during high-load cornering, ensuring the suspension maintains its intended geometry for improved tire contact and more predictable handling. Constructed with a high-strength aluminum oval shaft, this bar provides a high stiffness-to-weight ratio suitable for both street and track applications.

• Series: Type OS (Oval Shaft)
• Position: Rear Strut Tower
• Material: Polished aluminum shaft with steel end brackets
• Finish: Polished silver bar with Cusco Blue powder-coated brackets
• Installation Note: Modification or cutting of interior trunk panels is required for installation.
• Manufacturer Part Number: 692 541 A

Fits select 2008-2012 Subaru Impreza models, including WRX and WRX STI.

The Cusco Type OS Front Strut Tower Bar (692 540 A) is an essential chassis upgrade designed to improve handling by connecting the front shock towers. This rigid connection reduces chassis flex under heavy cornering loads, ensuring your suspension maintains its alignment geometry for more consistent tire contact and sharper steering response. Built with a signature oval shaft design, this bar provides high structural rigidity with a slim profile that maintains engine bay clearance.

• Series: Cusco Type OS (Oval Shaft)
• Position: Front
• Direct bolt-on installation to factory strut mounting points
• Increases chassis stiffness and reduces front-end flex
• Improves steering feel and turn-in precision
• Manufacturer Part Number: 692 540 A

Fits 2008-2017 Subaru Impreza WRX/STI, BRZ, Scion FR-S, and Toyota 86.

The Cusco Power Brace Rear Member (MPN 692 492 RM) is engineered to increase chassis rigidity by reinforcing the rear subframe mounting points. By minimizing unwanted floor and subframe flex during high-lateral G cornering or hard acceleration, this brace ensures more consistent suspension geometry and sharper steering response. This component is essential for GH8, GRB, and GVB chassis owners looking to stabilize the rear end and improve overall vehicle predictability.

• Reinforces rear subframe to reduce chassis distortion
• Improves suspension alignment consistency under load
• High-strength steel construction for maximum durability
• Direct bolt-on installation to factory mounting points
• Finished in signature Cusco Blue powder coat
• Manufacturer Part Number: 692 492 RM

Fits 2008-2014 Subaru Impreza WRX and STI models, including 2.5 GT, WRX Premium, and WRX Limited (GH8, GRB, GVB).

The Cusco Power Brace Floor Rear is engineered to reinforce the chassis of your Subaru, specifically targeting floor flex that occurs during aggressive cornering and high-speed maneuvers. By bridging structural points on the underbody, this brace increases the vehicle's torsional rigidity. This ensures that the suspension geometry remains consistent under load, resulting in more precise steering response and improved overall handling predictability.

• Position: Rear Floor
• Construction: High-strength steel with Cusco Blue powder-coated finish
• Installation: Direct bolt-on to factory mounting points
• Benefits: Reduces chassis distortion and improves suspension efficiency
• Manufacturer Part Number: 692 492 R

Fits select 2005-2014 Subaru Impreza WRX/STI, Forester XT, and Legacy GT models. This Cusco Power Brace Front Cross Member is engineered to reinforce the vehicle's chassis by connecting vital points of the front subframe. By minimizing chassis flex during high-load cornering and aggressive driving, this brace maintains more consistent suspension geometry for improved steering response and front-end stability.

Constructed from high-strength steel and finished in Cusco's signature blue powder coat, this brace is designed for a precise bolt-on installation using factory mounting locations. It is an essential upgrade for Subaru owners looking to sharpen handling performance without sacrificing street drivability.

• Manufacturer Part Number: 692 492 M
• Reduces chassis distortion for more accurate alignment tracking
• Direct bolt-on installation to factory cross member points
• Durable steel construction with corrosion-resistant blue finish
• Optimizes steering feedback and turn-in precision

Fits 2008-2014 Subaru Impreza, WRX, and WRX STI models.

The Cusco Power Brace Front Member (692 492 FM) is engineered to significantly increase chassis rigidity at the front of the vehicle. By connecting key structural points on the GH8, GRB, and GVB platforms, this brace minimizes body flex during high-load cornering. This leads to more precise steering feedback and ensures your suspension geometry remains stable under stress.

A key advantage of this specific Cusco unit is its design: it is engineered to be compatible with the OEM bumper beam. This allows for a performance upgrade without sacrificing the front-end structural components or safety equipment of the factory assembly. Each brace is constructed from high-strength steel and finished in Cusco's signature blue powder coat for long-term durability and corrosion resistance.

• Manufacturer Part Number: 692 492 FM
• Position: Front Member
• Chassis Codes: GH8, GRB, GVB
• Construction: High-strength steel
• Finish: Cusco Blue
• Fitment: Retains factory bumper beam

The Cusco Power Brace Floor Center is engineered to increase the structural integrity of your vehicle by reinforcing the middle section of the chassis. Fits 2008-2014 Subaru Impreza WRX and STI models (including 2.5 GT, WRX, and STI trims), this brace minimizes body flex during high-load cornering and spirited driving, providing more stable handling and precise steering response.

Constructed for the GH8, GRB, and GVB chassis, this brace connects key structural points to distribute stress more effectively across the floor pan. Note that for proper installation, modification of the factory plastic under-cover is required to accommodate the bracing.

• Manufacturer Part Number: 692 492 C
• Position: Floor Center
• Chassis Compatibility: GH8, GRB, GVB
• Installation Note: Requires modification to the plastic under-tray cover
• Application: 2008-2014 Subaru Impreza WRX/STI/2.5 GT

Fits select 2008-2014 Subaru Impreza WRX, WRX STI, and 2.5 GT models (Turbo only).

The Cusco Type II Lower Arm Bar is a multi-point chassis reinforcement designed to bridge the lower suspension arm mounts. Unlike the simpler two-point Version 1 brace, this multi-point unit significantly increases front-end rigidity by preventing the lower arm pivot points from flexing under heavy cornering or braking loads. By maintaining consistent suspension geometry, this bar improves steering precision and turn-in response for more predictable handling.

• Position: Front
• Type: Type II (Multi-point bridge)
• Construction: High-strength tubular steel with Cusco Blue finish
• MPN: 692 477 A
• Installation: Bolts to factory mounting points; cannot be used in conjunction with Version 1 lower arm bar
• Compatibility: Fits Turbo models only

Fits 2008-2014 Subaru Impreza (including WRX/STI) and 2010-2013 Subaru Legacy (2.5i/2.5GT/3.6R).

The Cusco Rear Adjustable Trailing Rod provides the necessary adjustment to correct rear wheel longitudinal positioning and caster, which is often compromised on lowered vehicles. By replacing the soft factory rubber bushings with high-rigidity pillowball joints, these rods eliminate unwanted suspension deflection under heavy braking and hard acceleration, providing more consistent handling and improved traction.

• Manufacturer Part Number: 692 474 T
• Adjustable length to fine-tune rear suspension geometry and wheel position
• Equipped with NMB pillowball bushings to eliminate compliance and deflection
• Improves stability and predictable handling during high-performance driving
• Direct bolt-on replacement for the OEM trailing arms
• Finished in signature Cusco blue for long-lasting corrosion resistance
• Designed for GRB, GVB, BR9, and BM9 chassis codes

Fits select 2013-2017 Subaru BRZ and XV Crosstrek, Scion FR-S, and Toyota 86 models.

The Cusco Rear Lateral Link (Front side) provides the critical adjustability needed to maintain proper suspension geometry. Specifically engineered for vehicles with lowered ride heights, this link offers +/- 12mm of toe correction, allowing you to restore factory alignment specs or dial in custom settings that are impossible to reach with the OEM eccentric bolts. By replacing the factory link, you improve rear-end stability and reduce irregular tire wear caused by aggressive suspension drops.

• Provides +/- 12mm of adjustable toe range for precise alignment
• High-strength steel construction for improved rigidity over factory components
• Essential for lowered vehicles to correct rear suspension geometry
• Direct replacement for the front-side rear lateral arm
• Manufacturer Part Number: 692 474 LA

Fits select 2008-2014 Subaru Impreza WRX, WRX STI, and 2009-2012 Forester models. This Cusco replacement hardware kit is designed specifically for front pillowball upper mount assemblies (GRB/GH8/SH5 chassis), ensuring a secure connection and precise articulation for your suspension system.

When refreshing your coilovers or replacing worn mounting components, using genuine Cusco hardware maintains the tolerances required for high-performance handling. This kit includes the necessary Nut-H and Collar-01 components to properly seat the shock absorber shaft within the spherical bearing of the upper mount.

• Manufacturer Part Number: 692 410 A
• Position: Front
• Includes: Nut-H and Collar-01
• Designed for Cusco Pillowball Upper Mounts
• Constructed from high-strength steel for durability under load

Fits select 2008-2014 Subaru Forester, Impreza, WRX, STI, Legacy, and XV Crosstrek models.

The Cusco 20mm Rear Sway Bar is an essential suspension upgrade designed to reduce body roll and improve the cornering balance of your Subaru. By increasing the roll stiffness of the rear suspension, this bar helps minimize the weight transfer that leads to understeer, providing a more neutral and predictable handling characteristic during high-speed cornering or technical driving.

• Diameter: 20mm
• Position: Rear
• Chassis Compatibility: Fits GRB, GVB, GH8, BR9, and BM9 chassis codes
• Construction: High-strength solid steel with signature Cusco blue powder coat finish
• Function: Increases roll resistance without sacrificing overall ride quality
• Manufacturer Part Number: 692 311 B20

This rear sway bar is a direct replacement for the factory component, utilizing original mounting points for a precise fit. It is particularly effective for WRX and STI owners looking to sharpen steering response and for Forester or Legacy owners seeking to eliminate the "boaty" feel associated with soft factory suspension tuning.

Fits select 2008-2014 Subaru Impreza WRX, WRX STI, and 2009-2012 Subaru Forester XT.

The Cusco 23mm Front Sway Bar is engineered to reduce body roll and improve steering response by increasing the torsional rigidity of your vehicle's suspension. This 23mm upgrade replaces the factory front bar, keeping the tire contact patch flatter during cornering for more predictable handling and sharper turn-in on the GRB and GVB chassis. Whether you are tracking your STI or looking for better stability on your WRX or Forester XT, this bar provides a direct-fit solution designed to work with factory mounting points.

• Diameter: 23mm
• Position: Front
• Manufacturer Part Number: 692 311 A23
• Material: High-strength spring steel with Cusco Blue finish

Vehicle Fitment

Fits 2008-2014 Subaru Impreza WRX and WRX STI (including Limited, Premium, and Special Edition models).

The Cusco Power Steering Rack Brace (692 026 ALHD) is a precision-engineered chassis reinforcement designed to eliminate unwanted steering rack movement. By stiffening the mounting connection between the steering rack and the subframe, this brace ensures that steering inputs are translated directly to the wheels, removing the vagueness and delay caused by component flex under load.

This modification is essential for 2008-2014 Subaru Impreza owners seeking improved steering feedback and sharper directional stability during aggressive driving. It is constructed to exacting tolerances, ensuring a secure fit on the factory mounting points without the need for extensive modification.

• Reduces steering rack deflection for increased steering precision
• Enhances tactile feedback through the steering wheel
• Direct bolt-on installation to factory mounting points
• Compatible with GRB, GVB, GH, and GE chassis codes
• Manufacturer Part Number: 692 026 ALHD

Fits 2013-2021 Subaru BRZ, Toyota 86, and Scion FR-S models.

The Cusco Spin Turn Knob, commonly referred to as a drift button, is a essential interior modification for drivers participating in gymkhana, drifting, or rally events. This component replaces the factory handbrake button and internal spring to disable the automatic ratchet lock mechanism on the emergency brake handle.

Once installed, the handbrake can be pulled and released freely without locking in the upright position, allowing for precise rear-wheel lockups during technical maneuvers. For street parking, the button can be manually pushed forward to re-engage the ratchet and secure the vehicle. Machined from high-grade aluminum and finished in a vibrant red anodize, this knob offers both functional utility and a distinct cockpit accent.

• Disables handbrake ratchet for drifting and gymkhana use
• Precision-machined from durable, lightweight aluminum
• Vibrant red anodized finish for corrosion resistance and style
• Direct replacement for the factory parking brake button
• Manufacturer Part Number: 692 014 AR

Fits Subaru BRZ, Toyota 86, and Scion FR-S models.

The Cusco Spin Turn Knob is an essential interior upgrade for enthusiasts and drifters requiring precise handbrake control. By replacing the factory handbrake button, this component disables the ratcheting lock mechanism, allowing the lever to return freely after being pulled. This enables quick, repetitive handbrake entries during drift or gymkhana maneuvers without the risk of the lever locking in the up position. For standard parking, the knob can be manually pulled forward to re-engage the locking function.

• Precision-machined from high-grade aluminum for a tactile, responsive feel
• Vibrant blue anodized finish provides long-lasting durability and corrosion resistance
• Direct replacement for the original equipment (OE) parking brake button
• Specifically engineered for the ZN6/ZC6 cockpit ergonomics

• Brand: Cusco
• Part Number: 692 014 AL
• Material: Aluminum
• Finish: Blue Anodized

Designed for drifting and gymkhana use, the Cusco Spin Turn Knob (Silver) is a functional upgrade for the Subaru BRZ, Toyota 86, and Scion FR-S handbrake system. This component replaces the factory emergency brake button and internal spring to disable the automatic locking mechanism, allowing the lever to return to the down position freely after being pulled.

• Function: Disables the ratchet lock mechanism to permit fluid handbrake turns without the lever locking in the up position.
• Locking Capability: The handbrake can still be manually locked for parking by pushing the knob forward.
• Material: Precision-machined aluminum with a durable silver finish.
• Installation: Direct replacement for the OE button; requires removal of the factory spring from the handbrake assembly.
• Manufacturer Part Number: 692 014 AA