Fits 2013-2015 Subaru BRZ.

Optimize your vehicle's front-end geometry and steering response with Cusco adjustable front lower control arms. Designed specifically for the ZC6 chassis, these arms provide the necessary adjustment to correct camber settings on lowered vehicles, ensuring a better tire contact patch for both street and track use. By replacing the factory units, these arms offer increased rigidity and reduced deflection under heavy cornering loads for more predictable handling and feedback.

• Manufacturer Part Number: 965 462 A
• Enables precise camber adjustment for improved alignment specs
• High-strength steel construction for maximum durability and rigidity
• Finished in signature Cusco Blue powder coat for corrosion resistance
• Direct bolt-on installation using factory mounting points
• Ideal for lowered vehicles needing geometry correction

Fits select 2013-2023 Toyota FR-S, 86, and GR86, 2013-2023 Subaru BRZ, and 2009-2014 Subaru Legacy.

Cusco Front Adjustable Camber Pillowball Upper Mounts replace the compliant factory rubber mounts with high-rigidity spherical bearings and a duralumin plate. This design eliminates the deflection inherent in OEM top mounts, providing significantly more precise steering response and maintaining consistent suspension geometry under heavy cornering loads.

• Integrated camber adjustment allows for fine-tuning of front-end alignment to optimize the tire contact patch.
• Equipped with high-quality NMB spherical bearings (pillowballs) for smooth, bind-free suspension articulation.
• Constructed from high-strength duralumin for maximum rigidity and weight savings.
• Direct replacement for factory upper strut mounts on compatible models.
• Manufacturer Part Number: 965 410 A

Fits select 2008-2023 Subaru Impreza, WRX, and STI models.

The Cusco Rear Pillowball Sway Bar End Link Set (MPN 965 317 A) is engineered to improve suspension response by replacing the soft factory bushings with high-precision, rigid spherical joints. By eliminating the deflection and delay found in OEM rubber links, these units ensure that your rear sway bar engages immediately during cornering, providing more consistent handling and better feedback through the chassis.

Featuring an adjustable range of 73mm to 87mm, these end links are essential for vehicles with lowered ride heights. This adjustability allows you to eliminate sway bar pre-load and correct the sway bar angle to prevent binding, ensuring the suspension works through its full range of motion. The robust construction is designed to withstand the increased stresses of track days and aggressive street driving.

• Position: Rear
• Joint Style: Pillowball (Spherical)
• Adjustment Range: 73mm - 87mm
• Installation: Direct bolt-on replacement for factory links
• Manufacturer Part Number: 965 317 A

Fits 2013-2017 Subaru BRZ, Toyota 86, and Scion FR-S.

The Cusco Rear 16mm Hard Hollow Sway Bar is engineered to refine the handling dynamics of the ZN6/ZC6 chassis by effectively reducing body roll during high-speed cornering. By increasing the torsional rigidity of the rear suspension system, this upgrade ensures more predictable steering response and improved tire contact patches under load. The hard hollow construction provides the necessary stiffness to improve stability while minimizing unsprung weight compared to traditional solid bars.

• Diameter: 16mm
• Construction: Hard hollow steel for optimal weight-to-rigidity ratio
• Finish: Cusco signature blue powder coat for corrosion resistance
• Installation: Direct bolt-on replacement for the factory rear sway bar
• Manufacturer Part Number: 965 311 B16

Vehicle Fitment:

Fits 2013-2017 Subaru BRZ, Toyota 86, and Scion FR-S models.

The Cusco 20mm Front Sway Bar is engineered to reduce body roll and enhance steering precision during high-speed cornering. By increasing the torsional rigidity of the front suspension system, this "Hard Solid" bar keeps the vehicle flatter through the apex, improving tire contact patches and overall stability. It is a direct-fit upgrade designed for the ZN6/ZC6 chassis, providing a more communicative front end without compromising daily drivability.

Constructed from high-tensile solid steel, this bar includes replacement brackets and bushings to ensure a secure, rattle-free installation to factory mounting points. Whether you are daily driving or participating in weekend track events, this bar replaces the softer factory component for more predictable chassis dynamics.

• Diameter: 20mm
• Construction: Hard Solid Steel
• Position: Front
• Included Hardware: Mounting brackets and bushings
• Manufacturer Part Number: 965 311 A20

Vehicle Fitment:

• 2013-2016 Scion FR-S Base
• 2013-2017 Subaru BRZ (Limited, Premium, Series.Blue, Series.HyperBlue)
• 2017 Toyota 86 (Base, Special Edition)

Protect your drivetrain components from radiant exhaust heat with the Cusco Steel Drive Shaft Heat Shield. Engineered for the rear left side of the vehicle, this component acts as a dedicated thermal barrier between the exhaust piping and the inner CV joint boot.

On the ZN6 and ZC6 platforms, the proximity of the exhaust to the driveshaft can lead to excessive heat soak. Over time, this heat causes grease breakdown and rubber boot failure. This durable steel shield helps maintain lower operating temperatures for the joint, making it an essential upgrade for track-driven vehicles or cars with high-flow aftermarket exhaust systems.

• Fits 2013-2020 Subaru BRZ, Toyota 86, and Scion FR-S models.
• Constructed from heavy-duty steel for long-term thermal resistance.
• Specifically protects the rear left side inner CV boot from exhaust heat.
• Direct-fit design utilizes existing mounting locations for a secure installation.
• Manufacturer Part Number: 965 047 A.

Fits select 2013-2021 Subaru BRZ, Scion FR-S, and Toyota 86 models.

The Cusco Clutch Release Fork and Pivot Set (965 024 S) provides a necessary reliability upgrade for vehicles equipped with heavy-duty aftermarket clutches. The factory-stamped steel clutch fork is a known weak point on the ZN6/ZC6 platform; under the increased pressure of a performance clutch cover, the OEM fork can flex or even fracture, resulting in inconsistent engagement or complete drivetrain failure.

This kit replaces the thin factory components with a reinforced release fork and a heavy-duty pivot point. These components are designed to withstand the higher clamping forces of racing clutches, ensuring precise pedal feel and long-term durability during aggressive shifting or track sessions.

• Direct OE replacement for the factory release fork and pivot bolt
• Reinforced design prevents bending and mechanical failure under high loads
• Critical upgrade for high-clamping force aftermarket clutch kits
• Improves clutch modulation and engagement consistency
• Manufacturer Part Number: 965 024 S

Fits 2012+ Subaru BRZ, Scion FR-S, and Toyota 86 / GR86 models.

The Cusco Clutch Line is engineered to replace the factory rubber hose, which often expands under the hydraulic pressure of spirited driving. By swapping the soft OE line for this high-performance alternative, you gain a firmer and more consistent clutch pedal feel. This modification is essential for drivers seeking precise engagement and improved feedback, especially when paired with heavy-duty aftermarket clutch kits.

• Direct replacement for the factory rubber clutch hose
• Minimizes line swell for more consistent hydraulic pressure
• Improves clutch engagement feel and pedal feedback
• Includes necessary hardware for a straightforward installation
• Manufacturer Part Number: 965 022 CL

Fits 2013 Subaru XV Crosstrek Limited and Premium models.

This Cusco front tow hook provides a dedicated, heavy-duty recovery point for your vehicle, whether you are on the track or the trail. Engineered for a precise fit on the 2013 XV Crosstrek chassis, this component is designed to handle the stresses of recovery and towing without compromising the vehicle's structural integrity.

• Position: Front
• Direct bolt-on fitment for supported models
• High-strength construction for reliable recovery use
• Manufacturer Part Number: 965 017 F

Each hook is manufactured to Cusco's exacting standards, ensuring it can withstand rigorous use while remaining easily accessible when needed. It is a necessary upgrade for enthusiasts looking to meet track safety requirements or improve off-road utility.

Fits 2013-2017 Subaru BRZ, Scion FR-S, and Toyota 86.

The Cusco Separator Type Oil Catch Tank (MPN 965 010 A) is an essential upgrade for maintaining engine longevity and performance on the ZN6/ZC6 platform. During the combustion process, blow-by gases containing oil mist and moisture often re-enter the intake tract, leading to carbon buildup on intake valves and potentially causing detonation. This separator type tank is specifically engineered to effectively isolate these contaminants, keeping your intake system clean and ensuring a more efficient air-fuel mixture.

• Direct fitment for 2013-2017 Toyota 86, Subaru BRZ, and Scion FR-S
• Advanced separator design improves the efficiency of oil-to-air separation over standard tanks
• Helps prevent power loss and idling issues caused by sludge buildup in the manifold
• Includes vehicle-specific mounting hardware and necessary plumbing for a clean installation
• Manufacturer Part Number: 965 010 A

Fits 1992-2000 Lexus SC400 Base models with the 4.0L engine.

The Cusco Type OS (Oval Shaft) Front Strut Tower Bar is engineered to reinforce the chassis of your Lexus SC400 by bridging the front strut towers. This connection reduces chassis flex during high-load cornering, ensuring the suspension geometry remains consistent for more precise steering response and improved handling stability.

The Type OS features a lightweight aluminum oval shaft with a high-polish finish, paired with steel end plate brackets finished in signature Cusco Blue. It is designed as a direct bolt-on component that utilizes factory mounting points for a clean, professional installation without the need for permanent vehicle modifications.

• Manufacturer Part Number: 961 540 A
• Series: Type OS (Oval Shaft)
• Position: Front
• Material: Polished Aluminum Shaft with Steel Brackets
• Fitment: 1992-2000 Lexus SC400 (4.0L / 1UZ-FE)

Fits 2011-2014 Scion tC Base models.

The Cusco Type OS (Oval Shaft) Front Strut Tower Bar is engineered to reinforce the chassis by tying the front shock towers together. This specialized brace reduces front-end flex during aggressive cornering and under heavy braking, maintaining proper suspension geometry and improving overall steering feedback and turn-in precision.

• Series: Type OS (Oval Shaft)
• Position: Front
• Construction: High-strength aluminum oval cross-section shaft with steel end-plate brackets
• Finish: Polished aluminum bar with signature Cusco blue brackets
• Installation: Direct bolt-on to factory mounting points; no drilling required
• Manufacturer Part Number: 960 540 A

Fits 2007-2011 Toyota FJ Cruiser (Base, Trail Teams Special Edition, and TRD Special Edition).

The Cusco Rear Sway Bar is engineered to reduce body roll and improve handling stability for the Toyota FJ Cruiser. By increasing the torsional rigidity of the rear suspension system, this 22mm sway bar helps keep the vehicle flatter during cornering and off-road maneuvers, ensuring a more consistent tire contact patch and more predictable steering response.

Constructed from high-strength materials and finished in Cusco's signature blue coating, this bar is designed for durability and performance. It serves as a direct replacement for the factory unit and includes the necessary bushings for a complete installation onto the original mounting points.

• Diameter: 22mm
• Includes performance-grade bushings
• Direct bolt-on installation to factory locations
• Reduces body roll without significantly affecting ride comfort
• Manufacturer Part Number: 957 311 B22

Designed to improve the structural integrity of the ZVW30 chassis, the Cusco Power Brace Rear End Underbrace (952 492 REN) reduces unibody flex during cornering and directional changes. By connecting key points on the rear section of the vehicle, this brace ensures the suspension geometry remains stable under load, leading to more predictable handling and improved steering response.

• Increases chassis rigidity to minimize unibody distortion
• High-strength steel construction for long-term durability
• Corrosion-resistant Cusco Blue powder-coated finish
• Direct bolt-on installation to factory mounting locations with no drilling required
• Specifically engineered for the Toyota Prius (ZVW30) chassis
• Manufacturer Part Number: 952 492 REN

Fits 2010-2015 Toyota Prius (ZVW30) USDM models only.

Improve your vehicle's handling and steering precision with the Cusco Type OS Front Strut Tower Bar. This essential chassis upgrade is engineered to bridge the gap between the front strut towers, effectively reducing chassis flex during cornering and heavy braking. By maintaining more consistent suspension geometry, this bar helps keep the tires planted for improved grip and more predictable feedback through the steering wheel.

The Type OS series features a high-rigidity, oval-section aluminum bar with a polished finish for a clean engine bay appearance. The end plates are constructed from steel and finished in Cusco’s signature blue powder coat for maximum durability and corrosion resistance. This bar is specifically designed for left-hand drive (USDM) configurations to ensure proper clearance around the brake master cylinder and other engine bay components.

• Increases chassis rigidity and reduces strut tower deflection
• Oval-section aluminum shaft with polished finish
• Steel end plates finished in Cusco Blue
• Direct bolt-on installation to factory mounting points
• Manufacturer Part Number: 951 540 ALHD

Fits 2010-2015 Toyota Prius (ZVW30).

The Cusco Power Brace Center is engineered to enhance the structural integrity of the ZVW30 chassis by reinforcing the middle section of the floor pan. By connecting key structural points, this brace minimizes chassis flex and body torsion during cornering, ensuring the suspension maintains its intended geometry for more precise handling and improved road feel.

• Increases chassis rigidity for more predictable handling and stability
• Direct bolt-on installation utilizing existing factory mounting points
• Constructed from high-strength steel for maximum durability
• Signature Cusco Blue powder-coated finish for superior corrosion resistance
• Designed to clear factory components and maintain ground clearance
• Manufacturer Part Number: 951 492 C

Reinforce your Toyota Prius C or Aqua chassis with the Cusco Lower Arm Bar Ver. II (949 477 A). This 4-point multi-connection brace is designed to bridge the lower suspension pivot points, significantly reducing body flex and maintaining precise alignment geometry during high-load cornering.

By tying the front subframe together at four distinct points, this bar ensures your suspension components work more efficiently, delivering sharper steering response and improved front-end stability. The Ver. II design offers superior structural rigidity compared to standard 2-point bars, making it an essential upgrade for drivers seeking more predictable handling.

• 4-Point Multi-Connection: Bridges multiple pivot points for maximum structural reinforcement and rigidity.
• Direct Bolt-On: Specifically engineered for the Toyota Prius C and Aqua to utilize existing factory mounting points.
• Durable Construction: Lightweight yet high-strength steel tubing finished in signature Cusco blue powder coating for corrosion resistance.
• Improved Dynamics: Reduces subframe distortion to keep the front suspension geometry consistent under load.
• MPN: 949 477 A

Fits 2011-2012 Toyota Prius (Base, Two, Three, Four, Five).

The Cusco Lower Arm Bar Version 1 is engineered to increase chassis rigidity by connecting the lower arm mounting points at multiple locations. This reinforcement prevents unwanted body flex and keeps the suspension geometry aligned during aggressive cornering and heavy braking. By stabilizing the front subframe, this bar improves steering precision and front-end feedback, making it an essential upgrade for drivers looking to sharpen their vehicle's handling dynamics.

• Manufactured from high-strength tubular aluminum for optimal weight-to-rigidity ratio
• Finished in signature Cusco Blue powder coat for corrosion resistance and durability
• Direct bolt-on installation to existing factory mounting points; no welding required
• Low-profile design to maintain ground clearance
• Manufacturer Part Number: 942 475 A

Fits 2003-2009 Lexus RX300, RX330, and RX350 FWD models (MCU30/MCU33 chassis) equipped with 1MZ-FE, 3MZ-FE, or 2GR-FE engines.

The Cusco 18mm Rear Sway Bar is engineered to significantly reduce body roll and improve handling stability during cornering. By increasing the torsional rigidity of the rear suspension, this bar helps keep your Lexus RX flatter through turns and improves steering response without sacrificing ride comfort. This is an essential upgrade for drivers looking to refine the SUV's chassis dynamics and eliminate excessive leaning during weight transfer.

• Diameter: 18 mm
• Position: Rear
• Finish: Signature Cusco Blue powder coat
• Drive Type: Specifically for Front-Wheel Drive (FWD) models
• Manufacturer Part Number: 924 311 B18

Fits the Toyota Celsior (UCF20/21).

The Cusco Type OS (Oval Shaft) front strut tower bar is designed to increase chassis rigidity by bracing the front shock towers together. By reducing structural flex under cornering loads or when driving over uneven surfaces, this bar helps maintain consistent suspension geometry and improves steering precision. This is a direct-fit performance upgrade that enhances the handling characteristics of the UCF20 platform.

• High-strength aluminum oval-section bar with a polished finish
• Steel end plate brackets finished in iconic Cusco Blue
• Reduces chassis distortion for more predictable handling and steering response
• Designed for a precise fit on factory mounting points
• Manufacturer Part Number: 917 540 A

Fits 2007-2011 Toyota Yaris.

The Cusco Front Upper Pillowball Mount is engineered to replace the factory rubber upper strut mounts, which are prone to deflection under heavy cornering loads. By utilizing a high-strength spherical bearing, this mount eliminates unwanted movement in the suspension assembly, ensuring that your alignment settings remain consistent and your steering response is immediate and precise.

• Replaces OEM rubber mounts to eliminate suspension deflection
• Provides sharper steering feedback and improved handling precision
• Essential for maintained alignment geometry during aggressive driving
• High-grade construction designed for durability and performance
• Manufacturer Part Number: 901 6SR 01S

Fits 2022-2024 Subaru BRZ (ZD8) and Toyota GR86 (ZN8) with the 2.4L FA24 engine.

Enhance your vehicle's drivetrain rigidity with the Cusco Engine Mount Set. These reinforced mounts are designed specifically for the 2.4L ZD8 and ZN8 chassis to significantly reduce engine movement and pitching during aggressive cornering, acceleration, and braking. By replacing the soft factory rubber with higher-durometer reinforced units, these mounts minimize engine oscillation, resulting in more precise throttle control and improved shifting feel under load.

• Reinforced rubber construction reduces drivetrain slop and engine movement
• Improves power transfer by limiting engine displacement
• Direct bolt-on replacement for factory OE mounts
• Engineered for high-performance street and track applications
• Manufacturer Part Number: 6C1 911 A

Fits 2022+ Subaru BRZ and Toyota GR86 (ZN8) models equipped with a 6-speed manual transmission. This Cusco Sport Shift Knob is engineered to improve the tactile connection between the driver and the gearbox, providing a more precise and weighted feel during spirited driving or daily commuting.

• Designed as a direct-fit replacement for the factory manual shift knob
• Optimized 44mm outer diameter (OD) for an ergonomic grip and improved leverage
• Clear 6-speed shift pattern engraving for a professional, race-inspired look
• Durable construction built to withstand constant use without excessive wear
• Manufacturer Part Number: 6C1 760 BA

Fits 2022-2024 Toyota GR86 (ZN8) and Subaru BRZ (ZD8) models (2.0L).

The Cusco Oil Pan Baffle Plate Kit is a critical upgrade for drivers who take their ZN8 or ZD8 chassis to the track. During high-G cornering, acceleration, and heavy braking, engine oil can slosh away from the pickup tube, leading to momentary oil starvation. This kit stabilizes the oil level within the pan, ensuring the oil pickup remains submerged to maintain consistent oil pressure and protect your engine internals.

• Engineered to prevent oil slosh and starvation during aggressive maneuvers
• Direct fitment for the factory oil pan on the ZN8 and ZD8 chassis
• Durable construction designed for high-heat racing environments
• Helps maintain stable oil pressure for engine longevity
• Manufacturer Part Number: 6C1 737 A

Fits 2022+ Toyota GR86 and Subaru BRZ models.

The Cusco Sport Street Zero A coilover system provides a versatile suspension solution for drivers who split time between the street and the track. This kit features a twin-tube shock design, which offers a longer stroke compared to mono-tube alternatives, ensuring better ride compliance and traction over uneven surfaces. With 40-way damping adjustment, you can fine-tune the suspension response to match your specific tires, aerodynamic setup, or track conditions.

This specific configuration includes hard rear upper mounts to minimize bushing deflection, providing more direct feedback and sharper turn-in. The full-length height adjustment allows for ride height changes without altering spring preload, preserving full suspension stroke even at lower settings.

• 40-level damping force adjustment for precise compression and rebound tuning
• Twin-tube shock construction for increased stroke and ride quality
• Full-length adjustable ride height system
• Hard rear upper mounts for improved chassis response
• Corrosion-resistant coating for long-term durability
• Manufacturer Part Number: 6C1 61N CN

Fits 2022-2024 Toyota GR86 (ZN8) and Subaru BRZ (ZD8).

The Cusco Rear Trunk Plus Power Brace is designed to increase chassis rigidity by reinforcing the rear structural points of the ZN8/ZD8 platform. By minimizing body flex during high-load cornering and spirited driving, this brace helps maintain consistent rear suspension geometry for improved handling response and a more composed feel.

Constructed from high-strength steel and finished in Cusco's signature blue powder coat, this brace is engineered for precision fitment and long-term durability. It serves as a direct bolt-on upgrade, utilizing existing factory mounting points in the trunk area to provide a noticeable increase in structural integrity without requiring permanent vehicle modifications.

• Manufacturer Part Number: 6C1 492 TP
• Enhances rear chassis rigidity and reduces structural torsion
• Durable signature Cusco Blue powder-coated finish
• Direct bolt-on installation to factory mounting points
• Optimized for the 2022+ GR86 and BRZ chassis

Fits 2022-2024 Toyota GR86 (ZN8) and Subaru BRZ (ZD8).

The Cusco Power Brace Front Cross Member (Rear Side) is engineered to increase chassis rigidity by reinforcing the vehicle's subframe structure. By bridging key points on the front cross member, this brace minimizes chassis flex during high-load cornering and aggressive driving, ensuring your suspension geometry remains consistent for more precise steering response and improved mechanical grip.

• Reinforces the front cross member (rear side) to reduce structural distortion
• Improves steering precision and overall handling stability
• High-strength steel construction designed for maximum durability
• Signature Cusco Blue powder-coated finish for superior corrosion resistance
• Direct bolt-on installation using existing factory mounting points
• Manufacturer Part Number: 6C1 492 FM

Fits 2022 Subaru BRZ and 2022 Toyota GR86.

The Cusco Steering Rack Reinforcing Stay (6C1 026 A) is engineered to increase the rigidity of the steering rack mounting points. On the ZN8 and ZD8 chassis, high-load cornering can cause the factory steering rack mounts to flex, resulting in a vague or disconnected steering feel. This reinforcing stay bridges the mounting points to minimize deflection and ensure more direct feedback from the front tires to the driver.

• Improves steering response and tactile precision
• Reduces steering rack movement under aggressive cornering loads
• Constructed from high-strength steel for maximum structural integrity
• Finished in signature Cusco Blue coating for long-term corrosion resistance
• Manufacturer Part Number: 6C1 026 A

Fits select 2013-2022 Toyota 86/GR86, Subaru BRZ, and Scion FR-S (0.6L).

The Cusco Oil Catch Tank Set (MPN 6C1 009 A) is an essential upgrade for maintaining engine longevity and performance by capturing oil, moisture, and blow-by gas before they can enter the intake manifold. By preventing these contaminants from re-entering the combustion chamber, this kit reduces carbon buildup on valves and ensures a cleaner air-fuel mixture. This specific set features a 0.6L round tank with a horizontal mounting design, optimized for clearance and ease of installation in the ZN6/ZC6 and ZN8/ZD8 engine bays.

• Manufacturer Part Number: 6C1 009 A
• Capacity: 0.6L Round Type
• Mounting: Horizontal orientation with vehicle-specific brackets
• Construction: High-polish finish aluminum for corrosion resistance and engine bay aesthetics
• Included: Catch tank, mounting bracket, hoses, and all necessary installation hardware

Fits 2022-2024 Subaru WRX (VB chassis).

The Cusco Type OS Rear Strut Tower Brace is designed to increase chassis rigidity by connecting the rear shock towers. This reduction in chassis flex helps maintain consistent suspension geometry during aggressive cornering, resulting in improved steering response and more predictable handling characteristics. As one of Cusco's most popular upgrades, the Type OS bar provides a functional performance benefit without compromising trunk utility.

• High-strength oval section aluminum shaft with a polished finish
• Steel end plates finished in signature Cusco Blue for corrosion resistance
• Direct bolt-on installation to factory mounting points
• Increases torsional rigidity and reduces unibody flex
• Engineered specifically for the 2022+ Subaru WRX chassis
• Manufacturer Part Number: 6A9 541 C