Fits select 1985-2005 Cadillac CTS-V, Chevrolet Camaro/Corvette, Ford F-150/F-250/Mustang, and Pontiac Firebird/GTO (4.6L / 5.0L).

DeatschWerks LS1/LS6 Series fuel injectors provide a high-performance, drop-in solution for enthusiasts looking to increase fuel delivery without complex modifications. These 42lb injectors are engineered for precise flow and atomization, ensuring consistent performance across all cylinders. This set of eight is specifically calibrated to meet the demands of high-output V8 engines, replacing lower-flowing OE injectors to support increased horsepower levels while utilizing factory-style fitment.

• Manufacturer Part Number: 18U-01-0042-8
• Flow Rate: 42lb/hr
• Configuration: Set of 8 injectors
• Fitment Style: LS1/LS6 body
• Installation: Drop-in compatibility with factory fuel rails and harnesses

Fits select 1985-2005 Cadillac CTS, Chevrolet Camaro and Corvette, Ford Mustang and F-Series, and Pontiac Firebird and GTO (4.6L / 5.0L).

DeatschWerks LS1/LS6 Series 39lb fuel injectors are engineered as a high-performance, drop-in solution for modern muscle applications. These high-flow injectors are designed to provide the increased fuel volume required for modified engines while maintaining the fitment characteristics of the original equipment. Each injector set undergoes a comprehensive multi-point testing process at DeatschWerks' facility in Oklahoma City, ensuring that flow rates and battery offsets are matched for precise tuning and reliable engine performance.

• Flow Rating: 39lb/hr
• Series: LS1/LS6 Series High Flow
• Fitment Type: Drop-in replacement for factory fuel rails
• Optimized for improved atomization and fuel delivery
• Manufacturer Part Number: 18U-01-0039-8

Fits select 2003-2025 Ford Mustang, F-150, and F-250 Super Duty models.

DeatschWerks high-flow fuel injectors are engineered to provide the precise fuel delivery required for high-horsepower builds, including forced induction and high-compression naturally aspirated applications. These 78lb injectors offer a true drop-in fitment, allowing them to integrate with the factory fuel rails and electrical connectors for a streamlined installation. By maintaining OE-style fitment while providing significantly higher flow rates, these injectors solve the fueling limitations often encountered when tuning or modifying late-model Ford engines.

• Flow Rate: 78lb/hr
• Fitment Type: Drop-in fuel injector upgrade
• Connector Type: Direct plug-in for specified Ford applications
• Engineered for consistent fuel atomization and reliable idle quality
• Manufacturer Part Number: 18U-00-0078-8

Maximize your engine's fueling potential with this set of four DeatschWerks Bosch EV14 high-performance fuel injectors. These injectors are engineered for precision and consistency, utilizing the proven Bosch EV14 internal architecture to ensure stable fuel delivery even in demanding high-horsepower applications. Featuring a 78lb/hr flow rate and a standard 60mm O-ring to O-ring length, they serve as a reliable high-flow solution for forced induction or E85-tuned engines where factory injectors fall short.

• Flow Rate: 78lb/hr (820cc/min) at 43.5 psi
• Injector Core: Genuine Bosch EV14 internals for fast response and superior atomization
• Length: 60mm Standard (O-ring to O-ring)
• Quantity: Set of 4 flow-matched injectors
• Compatibility: Universal high-impedance design compatible with most factory and aftermarket ECUs
• Manufacturer Part Number: 18U-00-0078-4

Fits select 2003-2025 Ford Mustang, F-150, and F-250 Super Duty.

These DeatschWerks 60lb top-feed fuel injectors are engineered to provide reliable, high-flow fuel delivery for Ford performance applications. Designed for drop-in fitment, they allow for a straightforward installation that utilizes factory mounting points and electrical connectors. These injectors are an essential upgrade for supporting increased horsepower in both forced induction and modified naturally aspirated builds, ensuring consistent fuel atomization and spray patterns across the RPM range.

• Flow Rate: 60lb/hr
• Injector Style: Top Feed
• Fitment Type: Vehicle-specific drop-in
• Manufacturer Part Number: 18U-00-0060-8
• Optimized for performance tuning and high-output fuel demands

Upgrade your fuel system with this set of four DeatschWerks fuel injectors, engineered using the proven Bosch EV14 platform. These universal high-performance injectors feature a 60mm standard length and a 60lb/hr (approximately 630cc/min) flow rate at 3bar, making them an ideal choice for forced induction and high-horsepower naturally aspirated builds requiring precise fuel delivery.

Built with modern EV14 technology, these injectors provide superior atomization and faster response times compared to older designs. Each set is flow-matched to ensure consistent cylinder-to-cylinder performance, reducing the risk of lean conditions during high-load operation. These are high-impedance injectors, compatible with most factory and aftermarket ECUs without the need for a resistor box.

• Manufacturer Part Number: 18U-00-0060-4
• Flow Rate: 60lb/hr (630cc/min) at 43.5 psi
• Technology: Bosch EV14 (High Impedance)
• Physical Length: 60mm (Standard/Long)
• Connector Type: Bosch EV14 / Jetronic
• Includes: Set of 4 injectors with pre-installed O-rings

Upgrade your vehicle's fuel delivery with this set of four DeatschWerks Bosch EV14 60mm standard fuel injectors. Utilizing the industry-standard Bosch EV14 platform, these high-impedance injectors are engineered for precision and reliability in high-performance applications. With a flow rate of 50lb/hr (approximately 525cc/min), they provide the necessary volume for forced induction or built naturally aspirated engines while maintaining excellent low-pulse-width linearity for a smooth idle and consistent drivability.

As universal components, these 60mm injectors are designed to fit a wide range of aftermarket and factory fuel rails. DeatschWerks subjects every set to rigorous multi-point dynamic flow testing to ensure each injector is closely matched, providing balanced fuel delivery across all cylinders for safer tuning and optimized power output.

• Manufacturer Part Number: 18U-00-0050-4
• Flow Rate: 50lb/hr (525cc/min)
• Injector Platform: Bosch EV14
• Physical Length: 60mm (Standard)
• Impedance: High Impedance
• Quantity: Set of 4 matched injectors

Fits select 2005-2025 Ford Mustang, F-150, and F-250 Super Duty (V8-5.0L / 5.2L / 5.4L / 6.2L).

Ensure your fuel system keeps pace with your engine's demands with this set of eight DeatschWerks 42lb/hr top feed fuel injectors. Designed for high-performance applications, these injectors provide a reliable increase in fuel flow for modified naturally aspirated or mild forced induction setups. Each injector is engineered for drop-in fitment, utilizing the factory fuel rail and electrical harness where possible to simplify the installation process.

DeatschWerks injectors are manufactured with strict quality assurance standards at their Oklahoma City facility, ensuring consistent flow rates and optimal spray patterns across the entire set. This precise matching is critical for maintaining balanced cylinder-to-cylinder air-fuel ratios, protecting your engine under high-load conditions.

• Flow Rate: 42lb/hr
• Configuration: Top Feed
• Quantity: Set of 8
• Direct fitment for select 2005-2025 Ford applications
• High-impedance internal design
• Manufacturer Part Number: 18U-00-0042-8

Fits select 2000-2006 Chevrolet Silverado 1500 and GMC Sierra 1500.

This DeatschWerks fuel injector set (MPN 17U-26-0095-8) is engineered to provide the increased fuel volume necessary for high-performance and forced induction applications. Delivering a flow rate of 95lb/hr, these injectors replace the factory units to support higher horsepower levels while maintaining precise fuel control. Each set is flow-matched to ensure consistent performance across all eight cylinders of your GM V8 engine.

DeatschWerks injectors are developed with a focus on drop-in fitment and reliable operation. Every unit undergoes rigorous multi-point testing in their Oklahoma facility, covering flow rate, spray pattern, and electrical integrity to ensure they meet strict quality standards for tuning and drivability.

• Manufacturer Part Number: 17U-26-0095-8
• Flow Rate: 95lb/hr
• Quantity: Matched set of 8 injectors
• Fitment Type: Vehicle-specific drop-in installation
• Application: Optimized for modified 2000-2006 GM 1500-series V8 trucks

Fits select 2005-2009 Cadillac CTS-V, Chevrolet Corvette, Chevrolet Trailblazer SS, and Pontiac GTO (6.0L).

Optimize your vehicle's fueling with this set of eight DeatschWerks high-flow fuel injectors. Engineered as a drop-in fitment solution for the 6.0L LS2 engine, these 42lb injectors provide the precise fuel delivery required for performance applications. DeatschWerks injectors are known for their reliable flow characteristics and are manufactured to exacting standards in their 36,000sf facility to ensure consistent performance across the entire set.

• Manufacturer Part Number: 17U-21-0042-8
• Flow Rate: 42lb/hr
• Quantity: Matched set of 8
• Engine Compatibility: 6.0L V8 (LS2)
• Fitment Type: Direct drop-in replacement for factory injectors
• Application-specific tuning data available for easy integration

Fits select 2002-2015 Acura and Honda models, including RSX, TSX, ILX, Civic Si, S2000, and CR-Z.

This DeatschWerks fuel injector set (MPN 17U-08-1000-4) utilizes high-performance Bosch EV14 technology to provide the precise 1000cc fuel delivery required for high-horsepower K-Series and F-Series builds. Designed as a drop-in fitment solution, these injectors leverage the fast response times and superior atomization of the EV14 body to maintain excellent idle quality and tuning stability even at high flow rates.

Each set is flow-balanced by DeatschWerks to ensure consistent fuel delivery across all cylinders, protecting your engine from lean conditions during high-load or high-boost operation. These injectors are compatible with a wide range of fuels, providing the flexibility needed for modern performance applications.

• Flow Rate: 1000cc/min
• Injector Technology: Bosch EV14
• Compatibility: Drop-in fitment for K20, K24, and F22 engine platforms
• Set Type: Flow-matched for balanced cylinder delivery
• Manufacturer Part Number: 17U-08-1000-4

Fits select 2002-2015 Acura ILX, RSX, TSX, and Honda Civic Si, CR-Z, and S2000.

DeatschWerks 750cc fuel injectors provide a high-flow, drop-in solution for performance-oriented builds requiring increased fueling capacity. Engineered for precision and reliability, these injectors are essential for supporting the fuel demands of forced induction or high-output naturally aspirated engines. By utilizing factory-style fitment, these injectors integrate seamlessly with the existing fuel rail and electrical connectors on select Acura and Honda applications.

Each DeatschWerks fuel injector set undergoes rigorous multi-point dynamic flow testing to ensure that the set is balanced within a tight tolerance. This process provides consistent fueling across all cylinders, which is critical for maintaining stable idle quality and achieving an accurate tune in high-performance environments.

• Manufacturer Part Number: 17U-08-0750-4
• Flow Rate: 750cc/min
• Quantity: Matched Set of 4
• Fitment: Drop-in installation for select Acura and Honda engines
• Testing: Flow-matched for consistent cylinder-to-cylinder performance

Fits select 2002-2015 Acura ILX, RSX, TSX and Honda Civic Si, CR-Z, and S2000.

DeatschWerks high-performance fuel injectors are engineered to provide a reliable, drop-in fuel delivery solution for enthusiasts and tuners. This set of 650cc injectors is designed to support increased power levels by providing higher flow than factory components while maintaining excellent idle and low-speed drivability. Every injector is manufactured with precise tolerances to ensure consistent flow across the entire set, making them an essential upgrade for forced induction or high-output naturally aspirated builds.

• Manufacturer Part Number: 17U-08-0650-4
• Flow Rate: 650cc
• Configuration: Set of 4 injectors
• Fitment Type: Drop-in performance upgrade
• Engineered for optimized spray patterns and fuel atomization

Fits select 2002-2015 Acura ILX, RSX, TSX and Honda Civic Si, CR-Z, and S2000.

DeatschWerks high-performance fuel injectors are engineered to provide precise fuel delivery for modified Honda and Acura engines. This set of four 550cc injectors offers a true drop-in fitment, utilizing the factory fuel rail and electrical connectors for a simplified installation process. These injectors are flow-balanced to ensure consistent performance across all cylinders, making them a critical upgrade for K20, K24, and other performance-oriented powerplants where fuel demands exceed the capacity of the original equipment.

• Flow Rate: 550cc/min
• Configuration: Set of 4 matched injectors
• Installation: Drop-in fitment for factory rails
• Quality: Flow-balanced and tested for reliability
• Manufacturer Part Number: 17U-08-0550-4

Compatible Vehicles:

• 2013-2015 Acura ILX (Base, Hybrid)
• 2002-2006 Acura RSX (Base, Type-S)
• 2004-2014 Acura TSX (Base, Special Edition, V6)
• 2002-2015 Honda Civic Si
• 2011-2015 Honda CR-Z (Base, EX)
• 2006-2009 Honda S2000 (Base, CR)

Fits select 2002-2015 Acura ILX, RSX, TSX and Honda Civic Si, CR-Z, and S2000 models.

DeatschWerks 440cc fuel injectors provide a high-performance fueling solution with the ease of drop-in fitment. Designed to integrate seamlessly with the factory fuel rail and electrical harness, these injectors eliminate the need for wiring adapters or spacers in supported applications. Each set is flow-balanced to ensure consistent fuel delivery across all cylinders, supporting smoother idling and reliable performance under load for naturally aspirated or mild forced induction builds.

• Flow Rate: 440cc/min
• Fitment: Application-specific drop-in design
• Flow-matched for balanced delivery across the set
• High-impedance (saturated) circuitry for compatibility with OE ECUs
• Optimized spray pattern for improved fuel atomization
• Manufacturer Part Number: 17U-08-0440-4

Fits select 2002-2018 Subaru Impreza, WRX, WRX STI, and Legacy GT spec.B.

DeatschWerks fuel injectors provide the increased flow capacity necessary for high-horsepower Subaru builds while maintaining the idle quality and low-load drivability required for a street-driven vehicle. These 1000cc injectors are built using high-quality Bosch EV14 cores, known for their fast response times and superior fuel atomization.

Engineered for drop-in fitment, these injectors integrate with the factory fuel rails and electrical connectors where specified, reducing the need for complex modifications. Each set is flow-matched to ensure balanced fuel delivery across all cylinders, providing the consistency needed for precise tuning and engine safety under boost.

• Flow Rate: 1000cc/min
• Injector Technology: Bosch EV14
• Installation: Drop-in fitment for supported applications
• Manufacturer Part Number: 17U-07-1000-4

Fits select 2002-2017 Subaru WRX, WRX STI, and Legacy GT spec.B models.

DeatschWerks Bosch EV14 750cc fuel injectors provide the precise fuel delivery required for modified Subaru EJ engines. These injectors are built on the trusted Bosch EV14 core, offering fast response times and excellent atomization for improved idle stability and consistent fueling across the entire powerband. They are a primary solution for enthusiasts moving beyond the capacity of factory injectors, especially when upgrading turbochargers or switching to E85 fuel.

Each set is flow-matched and designed for a drop-in fitment within the factory top-feed fuel system. The high-impedance coils allow for compatibility with the stock ECU while providing the overhead needed for high-boost applications.

• Manufacturer Part Number: 17U-07-0750-4
• Flow Rate: 750cc/min at 43.5 psi
• Technology: Bosch EV14 Core
• Configuration: Top-feed fuel injector
• Compatibility: Optimized for Gasoline and E85
• Quantity: Set of 4 matched injectors

Fits select 2002-2017 Subaru WRX, WRX STI, and Legacy GT models (EJ20/EJ25 engines).

This DeatschWerks 650cc top-feed fuel injector set is a critical upgrade for turbocharged Subaru EJ-series engines. These injectors are designed to provide the increased fuel volume necessary for modified builds while maintaining excellent low-end drivability. Every set undergoes dynamic flow matching to ensure each cylinder receives the exact same amount of fuel, preventing lean conditions and optimizing engine longevity.

• Flow Rate: 650cc/min
• Configuration: Top Feed
• Quantity: Matched Set of 4
• Manufacturer Part Number: 17U-07-0650-4
• Compatibility: Subaru EJ20 and EJ25 engines

DeatschWerks injectors are drop-in replacements for factory top-feed rails, featuring advanced internal pintle designs for superior atomization and a custom flow report for precise tuning. These units are E85 compatible and provide a reliable solution for enthusiasts targeting moderate horsepower gains.

Fits select 2003-2017 Nissan 350Z, 370Z, and GT-R, Infiniti G35 and G37, and 2004-2005 Volkswagen Golf GTI VR6.

DeatschWerks high-performance fuel injectors are designed as a drop-in fitment solution for enthusiasts seeking reliable fuel delivery in high-output applications. These 1000cc injectors provide the necessary flow for turbocharged, supercharged, or E85 builds while maintaining excellent low-end drivability and idle stability. Each set is flow-matched to ensure balanced fuel distribution across all cylinders, reducing the risk of lean conditions during high-load operation.

• Flow Rate: 1000cc
• Configuration: Set of 6 fuel injectors
• Fitment Style: Drop-in replacement for OE housing
• Compatibility: Compatible with various fuel types including E85
• Manufacturer Part Number: 17U-06-1000-6

Fits select 1999-2014 Hyundai Genesis Coupe, Nissan Sentra, and Subaru Impreza (2.0T).

These DeatschWerks 1000cc high-flow fuel injectors provide a reliable, drop-in fueling solution for high-performance builds. Designed to meet the demands of forced induction and high-output engines, each set of four is flow-matched in-house to ensure precise and uniform delivery across all cylinders. This level of consistency is critical for maintaining safe air-fuel ratios and optimizing engine tuning.

As a specialist in performance fuel systems, DeatschWerks engineers these components for direct fitment, replacing worn or restrictive factory injectors without the need for complex rail modifications. Each injector undergoes rigorous quality assurance at their 36,000-square-foot facility to ensure it meets strict performance tolerances.

• Manufacturer Part Number: 17U-06-1000-4
• Flow Rate: 1000cc/min
• Quantity: Set of 4 fuel injectors
• Fitment Style: Application-specific drop-in fitment
• Compatibility: Engineered for select Hyundai, Nissan, and Subaru platforms

Fits 2010-2014 Hyundai Genesis Coupe (2.0T).

Provide your engine with the precise fuel delivery required for high-performance tuning with this set of four DeatschWerks 750cc fuel injectors. Engineered specifically for the 2010-2014 Hyundai Genesis Coupe 2.0T, these injectors feature a drop-in design that utilizes factory mounting points and electrical connectors for a straightforward installation. Each injector is flow-balanced to ensure consistent performance across all cylinders, making them an ideal choice for forced induction or high-output builds where reliable fuel volume and atomization are critical.

• Manufacturer Part Number: 17U-06-0750-4
• Flow Rate: 750cc/min
• Quantity: Matched set of 4 injectors
• Installation: Direct drop-in fitment
• Design: Compatible with factory fuel rails and harnesses
• Application: Specifically optimized for Sport Compact performance

This DeatschWerks 650cc top feed fuel injector set is engineered to provide precise fuel metering and atomization for high-performance builds. These injectors are flow-matched in sets of six to ensure balanced fueling across all cylinders, reducing the risk of lean conditions under load. Designed as a drop-in solution, they are developed to integrate with factory mounting points and electrical connections for a straightforward installation.

Fits select 2003-2017 Nissan 350Z and 370Z, Infiniti G35 and G37, and 2004-2005 Volkswagen Golf GTI VR6.

• Manufacturer Part Number: 17U-06-0650-6
• Flow Rating: 650cc
• Configuration: Top Feed
• Quantity: Matched set of 6 injectors
• Installation: Drop-in fitment for OEM fuel rails

Fits select 1998-2017 Nissan 350Z, 370Z, Skyline RB25DET NEO, Infiniti G35, G37, and Volkswagen Golf GTI VR6.

This DeatschWerks fuel injector set provides a precise 440cc flow rate for engines requiring increased fueling capacity or reliable replacement for worn factory units. Each set is dynamically flow-balanced in-house to ensure consistent delivery across all cylinders, which is critical for maintaining optimal air-fuel ratios and engine safety under high-load conditions.

Designed in a top-feed configuration, these injectors are engineered to drop into compatible factory fuel rails, offering a significant upgrade in atomization and response over older injector designs. These high-impedance injectors maintain compatibility with factory ECUs while providing the overhead needed for light-to-moderate performance modifications.

• Flow Rate: 440cc/min
• Configuration: Top Feed
• Quantity: Flow-matched set of 6
• Compatibility: Nissan VQ-series, RB25DET NEO, and VW VR6 engines
• Manufacturer Part Number: 17U-06-0440-6

Fits select 1985-2005 Ford Mustang/F-Series, Chevrolet Camaro/Corvette, Pontiac Firebird/GTO, and Cadillac CTS-V.

DeatschWerks 95lb/hr high-flow fuel injectors are engineered to provide the precise fuel delivery required for high-performance forced induction or heavily modified naturally aspirated builds. These injectors are built using high-quality Bosch cores, which are then modified and dynamically flow-matched in-house at DeatschWerks' Oklahoma City facility. This process ensures consistent spray patterns and tight flow tolerances across the entire set, which is critical for maintaining safe air-fuel ratios and smooth idle quality in performance applications.

Designed as a drop-in fitment for many Ford and GM fuel rails, these injectors simplify the upgrade process by utilizing factory-style mounting points. Each set is rigorously tested to meet DeatschWerks' strict quality assurance standards, providing a reliable solution for enthusiasts pushing their LS1 or Ford powerplants to the next level.

• Flow Rate: 95lb/hr (1000cc/min) at 43.5 psi
• Quantity: Matched set of 8 injectors
• Compatibility: Engineered for Ford and GM EFI systems
• Construction: High-quality Bosch-based components
• Testing: Dynamic flow matching for cylinder-to-cylinder balance
• Manufacturer Part Number: 17U-05-0095-8

Fits select 2003-2025 Ford Mustang and F-150, and 2010-2015 F-250 Super Duty models (including SVT Cobra, GT, and Raptor).

Support your engine's fuel demands with DeatschWerks 95lb/hr fuel injectors. Engineered as a high-flow, drop-in solution, these injectors eliminate the need for complex modifications while providing the precise fuel delivery necessary for high-performance tuning. Each unit is processed through DeatschWerks' 36,000sf facility where design, manufacturing, and quality assurance are handled under one roof to ensure consistent flow and reliability.

• Manufacturer Part Number: 17U-04-0095-8
• Flow Rate: 95lb/hr
• Fitment: High-flow drop-in application
• Quality Assurance: In-house tested for performance and balancing
• Coverage: Sport Compact, Modern Muscle, and Euro applications

Fits select 2001-2008 Audi A4/TT, Mini Cooper S, and Volkswagen Golf GTI (1.8T).

This set of DeatschWerks 1000cc fuel injectors (MPN: 17U-01-1000-4) is designed for high-performance Euro and sport compact applications. Engineered to provide a high-flow fueling solution, these injectors offer a drop-in fitment that replaces worn or insufficient OE components. Each injector undergoes rigorous quality assurance at DeatschWerks' 36,000sf facility to ensure precise fuel delivery and consistency across the entire set, which is critical for maintaining safe air-fuel ratios in tuned 1.8T engines.

• Flow Rate: 1000cc/min
• Part Number: 17U-01-1000-4
• Engine Compatibility: 1.8T
• Fitment Type: High-flow drop-in
• Application: Euro, Sport Compact, and Modern Muscle

Vehicle Fitment:

Fits select 2001-2008 Audi A4 and TT, Mini Cooper S, and Volkswagen Golf GTI (1.8T).

DeatschWerks 750cc fuel injectors provide high-performance fuel delivery for enthusiasts looking to support increased boost or naturally aspirated modifications. These injectors are engineered for drop-in fitment, allowing for a simplified installation while maintaining a high level of spray atomization for better tuning and engine response. Every set is flow-matched to ensure consistent performance across all cylinders.

• Manufacturer Part Number: 17U-01-0750-4
• Flow Rate: 750cc/min
• Configuration: Set of 4 injectors
• Engine Compatibility: 1.8T and select Euro/Sport Compact applications
• Direct drop-in fitment for easy installation

DeatschWerks fuel system components are designed and tested in their 36,000sf facility in Oklahoma City. By focusing on precision and reliability, DW injectors have become a standard choice for Sport Compact and Euro tuners who require dependable fuel flow under demanding conditions.

Fits select 2000-2006 BMW (3-Series/M3), Mercedes-Benz (C32/SLK32 AMG), and Porsche (911) models.

DeatschWerks 550cc fuel injectors are engineered to provide precise fuel delivery for high-performance European applications. Designed as a drop-in fitment solution, these injectors integrate directly into the factory fuel rail and utilize standard electrical connectors for a straightforward installation. Each set is flow-balanced to ensure consistent fuel distribution across all cylinders, which is critical for maintaining safe air-fuel ratios in forced induction or modified naturally aspirated engines.

• Flow Rate: 550cc/min
• Quantity: Matched set of 6
• Fitment Type: Drop-in installation
• Manufacturer Part Number: 17U-01-0550-6

Detailed Fitment:

• 2000-2006 BMW 325Ci, 325i, 328Ci, 330Ci, 330i, 330xi, and M3
• 2002-2004 Mercedes-Benz C32 AMG and SLK32 AMG
• 2001-2005 Porsche 911 (Carrera, Carrera 4/4S/S, GT2, GT3, Targa, Turbo, and Turbo S)

Fits select 2001-2008 Audi A4/TT, Mini Cooper S, and Volkswagen Golf GTI (1.6L / 1.8T).

This set of four DeatschWerks high-flow fuel injectors is engineered to provide a drop-in fueling solution for performance-oriented Sport Compact and Euro applications. Each injector is precision-manufactured and flow-matched to ensure consistent fuel delivery across all cylinders, which is critical for maintaining safe air-fuel ratios in forced induction environments. These injectors are designed as a direct-fit replacement for the factory units, utilizing the existing fuel rail and electrical connectors for a simplified installation process.

• Flow Rate: 550cc/min
• Configuration: Set of 4 injectors
• Manufacturer Part Number: 17U-01-0550-4
• Fitment Type: Vehicle-specific drop-in
• Compatible Engines: 1.6L Supercharged and 1.8T Turbocharged

Vehicle Fitment:

• 2001-2006 Audi A4 Base (1.8T)
• 2003-2006 Audi A4 Cabriolet (1.8T)
• 2001-2006 Audi TT Base (1.8T)
• 2002-2008 Mini Cooper S (1.6L Supercharged)
• 2006 Volkswagen Golf GTI 1.8T

Fits select 1998-2006 BMW (323i/325i/330i/M3), Mercedes-Benz (C32/SLK32 AMG), and Porsche 911 models.

DeatschWerks 440cc fuel injectors provide a high-performance, drop-in fueling solution designed for precision and reliability. Engineered to replace factory units in select 6-cylinder BMW, Porsche, and Mercedes-Benz applications, these injectors are ideal for supporting moderate power increases in both naturally aspirated and forced induction setups. Every set is flow-balanced and quality-tested at DeatschWerks' Oklahoma City facility to ensure consistent fuel delivery and optimal engine performance across all cylinders.

• Flow Rate: 440cc/min
• Configuration: Set of 6 injectors
• Manufacturer Part Number: 17U-01-0440-6
• Drop-in fitment for factory fuel rails
• Quality tested for flow consistency and spray pattern