Fits select 2003-2017 Infiniti G35/G37, Nissan 350Z/370Z/GT-R, and Volkswagen Golf GTI VR6. This set of six DeatschWerks 1200cc fuel injectors is engineered to provide precise fuel delivery for high-performance and forced induction applications. Utilizing Bosch EV14 technology, these injectors offer exceptionally fast response times and superior atomization compared to older injector designs.

These injectors are designed as a drop-in fitment solution, simplifying the upgrade process by utilizing factory-style connectors and mounting points. Every set is flow-balanced to ensure consistent cylinder-to-cylinder fuel distribution, which is critical for maintaining safe air-fuel ratios under heavy load. The 1200cc flow rate provides the headroom necessary for significant power increases on gasoline or E85 fuel systems.

• Manufacturer Part Number: 16MX-06-1200-6
• Flow Rate: 1200cc/min
• Injector Technology: Bosch EV14
• Quantity: Set of 6 matched injectors
• Fitment Type: Drop-in installation
• Fuel Compatibility: Optimized for gasoline and E85

Fits select 2002-2015 Acura and Honda models including Civic Si, RSX, TSX, ILX, CR-Z, and S2000. This set provides high-flow fuel delivery for applications requiring precise tuning and reliable performance under high boost or naturally aspirated conditions.

These DeatschWerks fuel injectors are built using Bosch EV14 technology, known for its fast response times and excellent atomization. Designed as a drop-in solution, these injectors integrate with your factory fuel system to eliminate the need for complicated wiring or custom rail modifications. Each set is flow-balanced by DeatschWerks to ensure consistent cylinder-to-cylinder fuel delivery, helping to prevent lean conditions and optimize power output.

• Flow Rate: 1200cc/min
• Technology: Bosch EV14
• Fitment Type: Drop-in application
• Quantity: Matched set of 4 injectors
• Manufacturer Part Number: 16MX-03-1200-4

Fits 1986-2001 Honda Civic and Acura Integra models equipped with B, D, or H-series engines.

These DeatschWerks fuel injectors are engineered for high-performance applications requiring precise fuel delivery and significant flow capacity. Utilizing genuine Bosch EV14 technology, this set of four 1200cc injectors provides a modern, high-impedance solution for enthusiasts building forced induction or high-output naturally aspirated setups. Designed for drop-in fitment, these injectors ensure consistent atomization and stable idle characteristics, even at high flow rates.

• Flow Rate: 1200cc/min
• Injector Technology: Bosch EV14
• Quantity: Matched set of 4
• Fitment Type: Direct-fit for B/D/H series fuel rails
• Manufacturer Part Number: 16MX-01-1200-4

Fits select 2002-2015 Honda and Acura models, including Civic Si, S2000, RSX, TSX, ILX, and CR-Z. These DeatschWerks high-flow fuel injectors are designed to meet the demands of high-performance and forced induction builds, providing a significant increase in fuel delivery over factory components.

Built using high-quality Bosch EV14 cores, these 1500cc injectors offer exceptional response times and atomization across a wide range of pulse widths. Each set is flow-matched to ensure consistent cylinder-to-cylinder performance, simplifying the tuning process for K-series and F-series engines. These injectors feature drop-in fitment, utilizing the factory fuel rail and harness configurations for a straightforward installation.

• Manufacturer Part Number: 16M-03-1500-4
• Flow Rate: 1500cc/min
• Core Technology: Bosch EV14
• Quantity: Matched set of 4 injectors
• Fitment: Drop-in installation for K20, K24, F22, and L15 applications
• High-impedance compatibility for use with most aftermarket and factory ECUs

Upgrade your vehicle's fuel delivery with this set of DeatschWerks 450cc top feed fuel injectors, specifically engineered for drop-in fitment in 2001-2011 Honda Civic models. These high-performance injectors provide the increased flow capacity required for forced induction or tuned naturally aspirated builds without the need for harness adapters or fuel rail spacers.

As a specialist in aftermarket fuel systems, DeatschWerks subjects every injector to rigorous in-house testing to ensure precise flow balancing and optimal spray patterns. This ensures consistent cylinder-to-cylinder performance and smooth idle characteristics, even at higher flow rates than factory equipment.

• Flow Rate: 450cc/min at 43.5 psi
• Configuration: Top feed, drop-in fitment
• Compatible Engines: D17 and R18 series
• Manufacturer Part Number: 13U-01-0450-4
• Tested for flow balance and quality assurance in the USA

Vehicle Fitment

Fits 2001-2011 Honda Civic (DX, EX, EX-L, GX, HX, LX, LX-S, Si, Hybrid, and Value Package).

Fits select 2003-2024 Chevrolet Corvette, Pontiac GTO, Dodge Ram 1500/2500, Challenger, Charger, and Ram 1500/2500 (5.7L / 6.1L).

Upgrade your fuel delivery with DeatschWerks 42lb high-performance fuel injectors, engineered for precise drop-in fitment. Designed to meet the demands of modern muscle and heavy-duty truck applications, these injectors provide a direct replacement for factory units, ensuring seamless integration with your existing fuel rail and electrical harness. Every injector is flow-matched and tested at DeatschWerks' 36,000sf facility to ensure consistent performance and reliable idle quality.

Constructed for durability and precision, these fuel system components are ideal for supporting bolt-on modifications or replacing worn OE injectors in high-displacement Hemi and LS2-based engines. By maintaining tight tolerances and utilizing high-quality internals, DeatschWerks ensures your engine receives the exact fuel volume required for optimal combustion.

• Manufacturer Part Number: 13U-00-0042-8
• Flow Rate: 42lb/hr
• Engine Fitment: 5.7L and 6.1L
• Installation: Direct drop-in fitment
• Quality Assurance: In-house flow matching and testing

Fits 1991-1998 Nissan 240SX (Base, LE, and SE).

DeatschWerks 950cc side feed fuel injectors provide a high-flow fuel delivery solution for Nissan SR20-based platforms. These injectors are engineered for drop-in fitment, serving as a direct replacement for factory side-feed units while providing the increased volume required for forced induction or high-performance naturally aspirated builds. Each set is flow-matched to ensure consistent performance and tuning stability across all cylinders.

• Flow Rate: 950cc/min at 43.5 psi
• Configuration: Side Feed
• Design: Drop-in fitment for factory fuel rails and electrical connectors
• Quantity: Set of 4 flow-matched injectors
• Manufacturer Part Number: 02J-01-0950-4

Fits select 1997-2006 Subaru Impreza (Brighton, L, Outback, RS, WRX STI) and Legacy GT.

DeatschWerks 1000cc side-feed fuel injectors provide a high-flow, drop-in solution for Subaru EJ25 platforms and other compatible models. These injectors are engineered to deliver the precise fueling required for high-horsepower builds, including forced induction and E85 conversions, without compromising idle quality or low-speed drivability.

Each set is precision-matched and tested at the DeatschWerks facility in Oklahoma City to ensure consistent flow across all cylinders. By utilizing a side-feed configuration that fits into the factory fuel rail, these injectors simplify the upgrade process for enthusiasts seeking reliable, high-volume fueling for performance tuning.

• Flow Rate: 1000cc/min
• Configuration: Side Feed
• Drop-in fitment for compatible OE fuel rails
• Precision-matched for consistent cylinder-to-cylinder delivery
• Manufacturer Part Number: 02J-00-1000-4

Fits select 1997-2006 Subaru Impreza and Legacy models including WRX STI and Legacy GT.

DeatschWerks high-flow fuel injectors provide a precision drop-in fueling solution for Subaru EJ-series engines requiring side-feed upgrades. These 850cc injectors are flow-matched into balanced sets to ensure consistent fuel delivery and reliable tuning across all cylinders. Designed for high-performance applications, they directly replace factory side-feed units to support increased boost and horsepower levels without the need for fuel rail modifications.

• Flow Rate: 850cc/min
• Configuration: Side Feed
• Quantity: Set of 4
• Manufacturer Part Number: 02J-00-0850-4
• Fitment: Drop-in for EJ25 and select EJ engines

Fits select 1997-2006 Subaru Impreza (Brighton, L, Outback, RS, WRX STI) and 2004-2006 Legacy (GT, GT Limited).

Support your engine's fuel demands with a set of DeatschWerks 740cc side-feed injectors. Designed for high-performance EJ-series applications, these injectors provide a drop-in fitment solution that avoids the complexity of fuel rail modifications. Each injector is engineered to meet strict quality assurance standards, ensuring balanced flow rates across the set for precise tuning and reliable fuel delivery under high-load conditions.

• Flow Rate: 740cc/min
• Configuration: Side Feed
• Direct-fit installation into factory fuel rails
• Optimized for turbocharged and modified EJ-series engines
• Manufacturer Part Number: 02J-00-0740-4

Fits 1990-1996 Nissan 300ZX (Base, 2+2, and Turbo).

These DeatschWerks 740cc side-feed fuel injectors are engineered to provide precise fuel delivery for high-performance 1990-1996 Nissan 300ZX applications. Designed as a drop-in fitment solution, these injectors allow for significant fueling overhead for modified naturally aspirated or forced induction builds without the need for complex rail modifications.

• Flow Rate: 740cc/min
• Feed Type: Side Feed
• Installation: Drop-in fitment for factory fuel rails
• Compatible with 1990-1996 Nissan 300ZX (Z32) chassis
• Manufacturer Part Number: 01J-00-0740-6

Fits 1991-1998 Nissan 240SX (Base, LE, and SE models).

DeatschWerks side-feed fuel injectors provide a high-flow, direct-fit solution for the 1991-1998 Nissan 240SX. These 740cc injectors are designed as a drop-in replacement for factory units, offering the increased fuel volume necessary for forced induction or high-performance naturally aspirated tuning. By utilizing the original side-feed configuration, these injectors bolt into the factory fuel rail without the need for additional adapters or modifications.

• Flow Rate: 740cc/min
• Configuration: Side-feed
• Fitment Type: Direct drop-in replacement
• Application: Optimized for high-performance fuel systems
• Manufacturer Part Number: 01J-00-0740-4

Every DeatschWerks injector undergoes rigorous in-house testing to ensure precise flow balancing and reliability. This set provides the necessary overhead for fuel mapping adjustments while maintaining consistent performance across the RPM range.

Fits 1990-1996 Nissan 300ZX (Base, 2+2, and Turbo).

These DeatschWerks 550cc side-feed fuel injectors deliver high-performance fueling with the convenience of drop-in fitment. Engineered for precision and reliability, these injectors are flow-matched to ensure balanced fuel delivery across all cylinders, which is critical for maintaining safe air-fuel ratios and maximizing performance in forced induction or modified naturally aspirated engines. Designed to fit factory mounting points and electrical connectors, they provide a straightforward upgrade path for your Z32 chassis.

• Manufacturer Part Number: 01J-00-0550-6
• Flow Rate: 550cc/min
• Configuration: Side-feed
• Compatibility: 1990-1996 Nissan 300ZX
• Precision flow-matching for consistent cylinder-to-cylinder delivery
• Direct fit into factory fuel rails and harnesses

Fits 1991-1998 Nissan 240SX Base, LE, and SE models.

DeatschWerks 550cc side-feed fuel injectors provide a reliable, high-flow fuel delivery solution for enthusiasts requiring more headroom than the factory system allows. These injectors are designed as a drop-in fitment, allowing them to integrate into the factory fuel rail without the need for extensive modification. Every injector undergoes rigorous quality assurance testing at DeatschWerks' 36,000sf facility to ensure consistency and performance across the set.

• Flow Rate: 550cc/min
• Configuration: Side Feed
• Fitment Type: Drop-in replacement
• Compatible Models: Nissan 240SX (1991-1998)
• Manufacturer Part Number: 01J-00-0550-4

Fits 1990-1996 Nissan 300ZX Base, 2+2, and Turbo models.

DeatschWerks 370cc fuel injectors provide a reliable, high-flow solution for 1990-1996 Nissan 300ZX enthusiasts. These side-feed injectors are designed as a drop-in fitment, replacing the factory units to support increased performance while maintaining idle quality and drivability. Each set is flow-balanced to ensure consistent fuel delivery across all cylinders, reducing the risk of lean conditions under load.

• Flow Rate: 370cc/min
• Injector Type: Side Feed
• Set Size: 6 matched injectors
• Fitment: Drop-in installation for Nissan 300ZX factory fuel rails
• Manufacturer Part Number: 01J-00-0370-6

Fits 1991-1998 Nissan 240SX (Base, LE, and SE).

DeatschWerks 370cc side-feed fuel injectors offer a direct-fit fueling solution for Nissan 240SX owners seeking to refresh or moderately upgrade their fuel system. These injectors are engineered for drop-in installation into the factory fuel rail, maintaining the original side-feed configuration to avoid the need for custom fuel rail adapters or harness modifications. Every set is flow-balanced to ensure consistent fuel delivery across all cylinders, which is critical for maintaining optimal air-fuel ratios and engine safety.

• Manufacturer Part Number: 01J-00-0370-4
• Flow Rate: 370cc/min
• Injector Style: Side Feed
• Fitment Type: Direct Drop-in
• Compatible Engines: Nissan SR/KA Series

Fits 1990-1996 Nissan 300ZX Base, 2+2, and Turbo models.

Ensure precise fuel delivery and engine reliability with this set of DeatschWerks 270cc side-feed injectors. Specifically engineered for the Nissan Z32 platform, these injectors serve as a direct drop-in solution for both naturally aspirated (VG30DE) and twin-turbocharged (VG30DETT) applications. Each injector is manufactured to provide a consistent spray pattern and accurate flow rate, helping to maintain optimal air-fuel ratios across all cylinders.

DeatschWerks injectors undergo rigorous in-house testing to meet strict quality standards, ensuring they provide the durability required for high-performance use. This kit simplifies the installation process by utilizing factory-style side-feed fitment, eliminating the need for fuel rail modifications.

• Manufacturer Part Number: 01J-00-0270-6
• Flow Rate: 270cc/min
• Configuration: Side Feed
• Compatibility: 1990-1996 Nissan 300ZX (All Submodels)
• Includes all necessary O-rings for installation

Fits 1991-1998 Nissan 240SX (Base, LE, and SE models).

DeatschWerks 270cc side-feed fuel injectors are engineered as a high-flow, drop-in replacement for the Nissan 240SX platform. These injectors utilize the factory side-feed configuration, ensuring a straightforward installation process that maintains original fueling geometry while providing the increased capacity required for performance tuning.

Every DeatschWerks fuel injector is developed and evaluated at the company's 36,000sf facility in Oklahoma City. This centralized operation covers everything from design and end-manufacturing to rigorous quality assurance protocols, ensuring that each component delivers reliable performance and precise fuel metering for sport compact applications.

• Flow Rate: 270cc
• Configuration: Side Feed
• Fitment Type: Drop-in (Direct Replacement)
• Manufacturer Part Number: 01J-00-0270-4
• In-house tested for quality and performance consistency