Fits 2019-2026 Chevrolet Silverado 1500 and GMC Sierra 1500 (including LTD and Limited models).

The Eibach Pro-Truck Lift Block system is an engineered solution for increasing the rear ride height on solid-axle trucks equipped with leaf spring suspension. Whether you are looking to level your vehicle after installing a front coilover kit or need additional clearance for larger wheel and tire combinations, these blocks provide a precise 1-inch lift without compromising ride quality. Each block is CNC-machined from 6061-T6 billet aluminum and finished with a protective coating for long-term corrosion resistance.

Designed specifically to complement Eibach Pro-Truck Sport Shocks, this kit ensures proper axle alignment and suspension travel. The system includes heavy-duty steel centering pins and extended U-bolts to maintain a secure, factory-grade connection between the axle and leaf pack.

• Provides +1.0 inch of rear lift height
• Precision CNC-machined 6061-T6 billet aluminum construction
• Heavy-duty steel centering pins for precise axle location
• Black anodized finish for durability
• Includes four extended U-bolts and necessary mounting hardware
• Designed for use with Eibach PRO-TRUCK series components
• Manufacturer Part Number: LB81-23-032-01-02

Fits 2015-2026 Chevrolet Colorado and GMC Canyon models.

The Eibach Pro-Truck Rear Lift Block system is an engineered solution for increasing rear ride height on solid-axle trucks equipped with leaf spring suspension. This 1.0-inch kit is designed to level vehicle stance or provide additional clearance for larger wheel and tire combinations. Each block is precision CNC-machined from 6061-T6 billet aluminum and finished with a protective anodized coating for long-term corrosion resistance.

This kit includes heavy-duty steel centering pins to ensure proper axle alignment and extended U-bolts with matching hardware for a secure installation. It is specifically designed to complement Eibach Pro-Truck Sport shocks and coilover systems, ensuring consistent performance and suspension geometry.

• Provides 1.0" of rear lift
• Precision CNC-machined 6061-T6 billet aluminum construction
• Anodized finish for superior durability and corrosion protection
• Assembled with heavy-duty steel centering pins for precise axle location
• Includes extended U-bolts and necessary mounting hardware
• Manufacturer Part Number: LB81-23-007-01-02

Fits 2014-2018 Chevrolet Silverado 1500 and GMC Sierra 1500 models. This Eibach PRO-TRUCK Lift Block system is engineered to increase the rear ride height of solid-axle trucks utilizing a factory leaf spring suspension. Each block is precision-machined from 6061-T6 billet aluminum and finished with an anodized coating for superior corrosion resistance.

Designed as the perfect complement to PRO-TRUCK Coilover or PRO-TRUCK-LIFT systems, these 1.0-inch blocks feature heavy-duty steel centering pins to ensure proper axle alignment and stability under load. This kit provides a clean, bolt-on solution for achieving a level stance or increasing ground clearance without compromising ride quality.

• Manufacturer Part Number: LB81-23-006-02-02
• Lift Height: 1.0 inch
• Construction: Anodized 6061-T6 Billet Aluminum
• Centering Pin: Heavy-duty steel
• Compatibility: Optimized for use with PRO-TRUCK Sport Shocks
• Included Hardware: Extended U-bolts and necessary mounting hardware

The Eibach ERS 2.50 in. ID Isolator (Delrin Seat Plate) is a precision-engineered race spring accessory designed to optimize suspension response. By providing a low-friction interface between the spring and the perch, this seat plate eliminates the torsional binding that occurs during spring deflection, ensuring your suspension maintains a consistent rate through its entire range of travel.

Constructed from lightweight and durable Delrin, the ISOLATOR250 is built to withstand the rigors of competitive racing while minimizing friction-induced stiction. This allows for smoother movement and more predictable handling on the track. This component is essential for racers looking to fine-tune their Eibach Race Spring (ERS) system for maximum efficiency.

• Reduces torsional binding by removing friction during spring deflection
• Ensures smoother and more consistent spring action through the full range of travel
• Engineered for use with 2.50 in. inside diameter (ID) springs
• Lightweight, high-durability Delrin construction
• Manufacturer Part Number: ISOLATOR250

The Eibach ERS 60mm ID Linear Tender Spring is a precision-engineered component of the Eibach Race Spring system, designed to maintain tension on the main spring when the suspension is fully unloaded. By filling the gap during suspension droop, this tender spring ensures the main spring remains properly seated on the perch, preventing dangerous displacement during aggressive driving or over rough surfaces.

Built with high-strength flat spring wire, the HELPER60 is optimized for maximum travel and an exceptionally low block height to minimize stack-up in high-performance coilover assemblies. As part of the ERS line, each spring is individually tested to meet the rigorous tolerances required for professional racing and fine-tuned handling dynamics.

• Manufacturer Part Number: HELPER60
• Inner Diameter (ID): 60mm
• Spring Type: Linear Tender/Helper Spring
• Material: Specialized flat wire for minimum block height and maximum travel
• Series: Eibach Race Springs (ERS)
• Testing: Individually tested for rate and dimensional accuracy

The Eibach ERS 3.00 in. ID Helper Spring is a precision-engineered component designed to maintain suspension integrity in professional racing applications. As part of the Eibach Race Spring (ERS) system, this helper spring serves the critical function of keeping the main spring securely seated against the perches when the suspension is fully unloaded or at full droop.

Manufactured from high-tensile flat spring wire, this helper spring is optimized for maximum travel and an exceptionally low block height. This compact design ensures it does not interfere with the main spring's stroke or contribute to premature coil bind. Each spring is individually tested to meet Eibach's rigorous tolerances for performance and reliability.

• Maintains Spring Position: Keeps the main coil spring properly indexed during suspension extension.
• Flat Wire Construction: Specifically designed for minimum block height and maximum usable travel.
• Versatile Application: Engineered for use with 3.00-inch inner diameter (ID) shocks, coilovers, and pull-bars.
• Individually Tested: Each unit is verified for consistent performance before leaving the factory.
• Manufacturer Part Number: HELPER300

The Eibach ERS 2.50 in. ID Helper Spring (HELPER250T) is a precision-engineered suspension component designed to maintain tension on the main spring when the suspension is fully unloaded. By keeping the main spring securely seated against the perches during full droop, this helper spring prevents misalignment and potential damage to the coilover assembly during aggressive driving or over rough terrain.

• Inner Diameter (ID): 2.50 in.
• Flat Wire Construction: Specifically designed to achieve maximum travel with a minimal block height, preserving the usable stroke of your suspension system.
• Reliable Seating: Prevents the main spring from shifting when the suspension reaches full extension.
• Quality Assurance: Each spring is individually tested to ensure consistent performance and rate accuracy.
• Race-Ready Design: Built for high-performance applications where suspension travel and reliability are critical.
• Part Number: HELPER250T

Maintain consistent suspension tension and handling predictability with the Eibach ERS 2.50" diameter coilover helper spring. Part of the Eibach Race Spring (ERS) system, this helper spring is specifically designed to keep the main spring properly seated against the spring perches when the suspension is fully unloaded or at full droop. This prevents spring play and potential misalignment during aggressive driving or over uneven track surfaces.

Manufactured using high-strength flat spring wire, the HELPER250 is engineered to provide maximum travel while maintaining a minimal block height. This specialized profile ensures that the helper spring does not interfere with the main spring's stroke or reduce the available travel of your coilover assembly. Each spring is individually tested to meet the rigorous tolerances required for professional racing and performance applications.

• Manufacturer Part Number: HELPER250
• Inside Diameter: 2.50 inches
• Material: Precision-engineered flat spring wire
• Design: Minimal block height for maximum suspension travel
• Application: Keeps main spring seated when suspension is unloaded
• Testing: Each unit is individually tested for quality assurance

The Eibach ERS 2.25in ID Helper Spring (MPN: HELPER225T) is a critical component for high-performance suspension systems, designed to maintain tension on the main spring when the suspension is fully unloaded. In racing applications where short main springs are used, this helper spring prevents the main spring from becoming unseated from its perches during full droop or when the vehicle is lifted, ensuring the suspension remains properly indexed.

Engineered with flat spring wire, this component provides maximum travel while maintaining a remarkably low block height. This specialized profile ensures that once the vehicle weight is applied, the helper spring compresses fully into a compact height, allowing for more usable stroke from your main spring and shock assembly. Like all components in the Eibach Race Spring (ERS) catalog, each spring is individually tested to ensure it meets strict performance tolerances.

• Inside Diameter: 2.25 inches
• Design: Flat wire construction for minimum block height and maximum travel
• Function: Keeps main spring seated when suspension is unloaded
• Quality Control: Each spring is individually tested for rate accuracy
• Series: Eibach Race Spring (ERS)
• Manufacturer Part Number: HELPER225T

The Eibach ERS (Eibach Race Spring) helper spring is a critical component for maintaining suspension integrity on competition and high-performance coilover systems. Designed for 2.25-inch diameter setups, this spring prevents the main spring from becoming unseated or dislodged from the spring perch when the suspension is fully unloaded or reaches full droop.

Engineered with a flat spring wire profile, this helper spring provides an exceptionally low block height to ensure it does not compromise the total available travel of your primary race spring. Each unit is individually tested to ensure it meets Eibach’s rigorous performance tolerances for racing applications.

• Maintains main spring seating during full suspension extension (droop)
• Flat wire construction for maximum travel and minimal block height
• Compatible with 2.25-inch (57mm) inner diameter coilover systems
• Individually tested for rate consistency and reliability
• Sold individually (one spring)
• Manufacturer Part Number: HELPER225

Fits select 2015-2021 Can-Am Maverick, Honda Talon, Polaris RZR, Textron Wildcat, and Yamaha YXZ1000R models. Please refer to the fitment table below for specific submodel compatibility.

The Eibach Pro-UTV Spanner Wrench Kit is an essential tool for any UTV owner running adjustable suspension. Engineered specifically to interface with the unique shock collars found on performance UTV platforms, this kit allows for precise adjustments to spring preload and ride height. Unlike generic wrenches, these tools provide a secure grip on the collar to prevent slipping, which protects both your hardware and your knuckles during maintenance or track-side tuning.

• Specifically engineered to work with OEM and Eibach UTV shock collars
• Precision-cut for a secure fit to prevent slipping and damage
• Durable construction designed for heavy-duty shop and field use
• Proudly Made in the U.S.A.
• Manufacturer Part Number: ETXR2.5

Fits select 2014-2021 Polaris General XP 4 1000, RZR 900, RZR XP 1000, and RZR XP Turbo models.

The Eibach Pro-UTV Spanner Wrench Kit (ETWE2.5) provides the essential tools required to adjust your UTV’s suspension without damaging the sensitive shock collars. Specifically engineered for a precise interface with Polaris shock collar notches, these wrenches allow you to safely modify spring preload and ride height to suit your specific terrain, load, or racing requirements.

• Engineered to work with factory UTV shock collars for precise fitment
• Facilitates accurate adjustment of spring preload and ride height
• Robust construction designed to prevent slipping or rounding of collar notches
• Made in the U.S.A.
• Manufacturer Part Number: ETWE2.5

Vehicle Fitment

Fits 2014-2022 Chevrolet Colorado and Silverado 1500 models equipped with Eibach Pro-Truck Coilover 2.0 suspension systems.

The Eibach PTC Tool (ETPTC2.0) is a specialized adjustment spanner designed specifically to interface with the shock collars on the Pro-Truck Coilover 2.0 series. This pre-assembled tool provides the precise leverage and grip required to adjust vehicle ride height safely, ensuring you can tune your suspension without damaging the threaded shock bodies or the anodized collars.

• Engineered specifically for Eibach Pro-Truck Coilover 2.0 shock collars
• Allows for accurate ride height adjustments and preload tuning
• Fully assembled construction for immediate use
• Manufactured with high-strength materials for shop durability
• Proudly Made in the U.S.A.
• Manufacturer Part Number: ETPTC2.0

Fits select 2015-2021 Can-Am Maverick/X3, Polaris RZR, Textron Wildcat XX, and Yamaha YXZ1000R models.

The Eibach Pro-UTV Spanner Wrench Kit is a specialized tool designed for precision suspension tuning. Engineered to interface perfectly with factory and aftermarket UTV shock collars, these wrenches provide the necessary leverage to adjust ride height and spring preload without slipping or damaging the collar notches. Whether you are prepping for technical trails or adjusting for added cargo weight, this kit is an essential addition to any UTV owner's toolbox.

• Specifically engineered to work with UTV shock collars for a secure fit
• Enables precise adjustment of spring preload and vehicle ride height
• High-strength construction provides durable leverage for seized or dirty threads
• Proudly Made in the U.S.A.
• Manufacturer Part Number: ETFX2.5

Fits select 2014-2022 Chevrolet Silverado 1500 and Colorado models equipped with Eibach Pro-Truck Coilover 2.0 suspension systems.

Maintain and adjust your vehicle's ride height with precision using the Eibach Pro-Truck Coilover 2.0 Spanner Wrench. This single-wrench kit is specifically engineered to mate perfectly with the shock collars on ETCO2.0 series coilovers, preventing the slipping and marring often associated with generic tools. Featuring a heavy-duty build and a rubberized grip for improved leverage and comfort during adjustment, this tool is essential for any truck owner looking to fine-tune their suspension setup.

• Engineered specifically for Eibach Pro-Truck Coilover 2.0 shock collars
• Rubberized grip ensures a secure, comfortable hold during adjustment
• Heavy-duty construction for long-term durability
• Proudly Made in the U.S.A.
• Manufacturer Part Number: ETCO2.0

Protect your suspension investment with Eibach Spring Bags (ESB10.250). Designed to shield coilover components from harsh track and off-road environments, these covers prevent mud, dirt, and debris from packing into the spring coils or damaging the sensitive damper shaft seals.

• Durable Protection: Constructed from lightweight neoprene and nylon materials to resist the elements and extend damper service life.
• Convenient Access: Features an easy-to-use Velcro split opening, allowing for quick shock and spring adjustments without requiring the removal of the coilover assembly.
• Clean Operation: Keeps spring adjusters and threads free of grit, ensuring height adjustments remain smooth and effortless.
• Specifications: 0.03in diameter, 203-254 rate; compatible with lengths from 8" to 10" (203mm-254mm).
• Sold as a pair.

Manufacturer Part Number: ESB10.250

The Eibach ERS Bump Stop is a critical component for maintaining control in performance suspension systems. Designed to create a highly progressive, rising-rate effect, these stops manage the final inches of suspension travel to prevent harsh bottoming and damaging coil bind. This part is essential for racers looking to fine-tune secondary spring characteristics through the compression stroke.

Constructed from race-proven micro-cellular polyurethane elastomer, the EBS770060 provides significant deflection potential while maintaining its shape with near-zero lateral expansion. This ensures consistent performance and clearance even when the suspension is fully compressed under high aerodynamic or cornering loads.

• Material: High-grade micro-cellular polyurethane elastomer
• Engineered for secondary spring tuning and progressive rate compression
• High deflection capability with minimal lateral expansion
• Prevents coil bind and harsh mechanical bottoming in racing applications
• Manufacturer Part Number: EBS770060

The Eibach ERS Bump Stop (EBS770044) is a critical component for high-performance suspension tuning, designed to create a highly progressive, rising-rate effect as springs approach full travel. This prevents harsh bottoming and potential coil binding, acting as a secondary spring to maintain chassis control under extreme loads.

Constructed from race-proven micro-cellular polyurethane elastomer, these bump stops offer tremendous deflection potential with near-zero lateral expansion. This allows for precise fitment in tight spaces where traditional rubber stops might distort and interfere with other components. They are engineered to provide maximum tuning flexibility for various racing applications.

• Manufacturer Part Number: EBS770044
• Material: Race-proven micro-cellular polyurethane elastomer
• Compression Style: Progressive rising-rate characteristics
• Function: Acts as a secondary spring to prevent coil bind and bottoming
• Design Benefit: High deflection potential with minimal lateral expansion

Fits 2025 Toyota 4Runner TRD Off-Road (2.4L).

The Eibach PRO-TRUCK-LIFT Stage 2 system provides a significant upgrade in front-end adjustability and trail performance. This system utilizes front 2.0 coilovers built with an extended-travel monotube design and nitrogen-filled variable force valving. This configuration delivers precise control during highway transit while maintaining the compliance necessary for maximum traction in off-road environments.

The front coilovers feature adjustable threaded spring perches to accommodate increased loads from bumpers or winches, and they come equipped with Eibach ERO Off-Road Race Springs. The rear of the vehicle is supported by rear lift springs, sport shocks, and a specialized air bag delete for consistent ride quality and height. Every damper is individually dyno-tested to ensure matched performance and reliability across the set.

• Precision Engineering: 46mm piston monotube design with variable force valving for consistent damping.
• Premium Materials: Anodized 6061-T6 billet aluminum coilover mounts and heavy-duty cycle-tested bushings.
• Adjustable Height: Threaded perches allow for fine-tuned front-end clearance and leveling.
• Complete System: Includes front 2.0 coilovers, rear sport shocks, rear lift springs, and air bag delete hardware.
• Origin: Engineered, tested, and manufactured by Eibach in the U.S.A.
• Manufacturer Part Number: E86-82-109-01-22

Fits 2025 Toyota 4Runner TRD Off-Road (2.4L).

The Eibach PRO-TRUCK COILOVER 2.0 system is engineered to provide the perfect balance of on-road stability and off-road capability. Utilizing an extended-travel monotube design combined with nitrogen-filled variable force valving, these front coilovers ensure maximum traction and compliance on the trails while maintaining precise control during highway transit. Each unit is pre-assembled for a straightforward factory-direct replacement, requiring no additional hardware for installation.

• Adjustable threaded spring perch to accommodate increased loads and provide maximum ground clearance
• Equipped with ERO Off-Road Race Springs for consistent performance
• Anodized 6061-T6 billet aluminum mounts with a robust 46mm piston
• Individually dyno-tested to ensure matched performance and long-term reliability
• Heavy-duty bushing system cycle-tested for durability in harsh environments
• Engineered and manufactured by Eibach in the U.S.A.
• Sold as a pair
• Manufacturer Part Number: E86-82-109-01-20

Fits 2024-2025 Toyota Tacoma Limited, SR5, TRD Off-Road, and TRD Sport.

The Eibach PRO-TRUCK-LIFT Stage 2R system is engineered for drivers who demand consistent damping performance across challenging terrain. This kit combines height-adjustable PRO-TRUCK Coilover 2.0 units for the front with PRO-TRUCK Reservoir Sport Shocks for the rear. The external reservoirs on the rear dampers provide increased oil capacity to manage heat and prevent fade during sustained off-road cycles, while the monotube design ensures immediate response.

• Complete Stage 2 system: Pro-Truck Coilover 2.0s, Pro-Lift-Kit Springs, and Pro-Truck Reservoir Sport Shocks
• 46mm piston monotube design with nitrogen-filled variable force valving
• Anodized 6061-T6 billet aluminum coilover mounts for superior strength
• Individually dyno-tested to ensure matched performance and reliability
• Heavy-duty bushing system cycle-tested for long-term durability
• Height-adjustable front coilovers for precision ride height tuning
• Engineered and manufactured by Eibach in the U.S.A.
• Manufacturer Part Number: E86-82-105-02-22

Fits 2024-2025 Toyota Tacoma (Limited, SR5, TRD Off-Road, and TRD Sport).

The Eibach Pro-Truck Coilover 2.0 system is engineered for drivers who demand both highway precision and trail-ready compliance. Built using an extended-travel monotube design, these coilovers utilize variable force valving to deliver a controlled ride during transit while maintaining maximum traction in technical off-road environments. These units are factory-direct replacements that come pre-assembled for a straightforward installation, requiring no additional hardware.

Constructed with durability in mind, each coilover features a 46mm piston and nitrogen-filled shock body. The assembly includes ERO Off-Road Race Springs and an adjustable threaded spring perch, allowing you to compensate for added weight or fine-tune front-end clearance. To ensure consistency and reliability, every unit is individually dyno-tested and equipped with a cycle-tested heavy-duty bushing system.

• Manufacturer Part Number: E86-82-105-01-20
• Anodized 6061-T6 billet aluminum mounts for high-strength durability
• Large 46mm piston monotube design for improved damping response
• Nitrogen-filled variable force valving for adaptive performance
• Equipped with ERO Off-Road Race Springs
• Pre-assembled for bolt-on installation; sold as a pair
• Engineered and manufactured by Eibach in the U.S.A.

Fits 2023-2025 Toyota Sequoia Limited, Platinum, and SR5 models.

The Eibach Pro-Truck Lift Kit Stage 2R is a comprehensive suspension upgrade engineered for demanding off-road terrain. This system combines the ride-height adjustability of Pro-Truck Coilover 2.0 front assemblies with the increased oil capacity and cooling of external reservoir rear dampers. The result is a setup that maintains consistent damping control and prevents shock fade during extended trail use.

Built for durability, this kit features 6061-T6 billet aluminum mounts and a 46mm piston monotube design. Each shock is nitrogen-filled with variable force valving and is individually dyno-tested to ensure matched performance across the vehicle. This Stage 2R system replaces factory components with heavy-duty hardware designed to improve both ground clearance and handling dynamics.

• Complete system including Pro-Truck Coilover 2.0s, Pro-Truck Reservoir Sport Shocks, and Pro-Lift-Kit Springs
• Height-adjustable front coilovers for precise leveling and clearance
• External reservoir rear shocks for superior thermal management and performance
• 46mm piston monotube design with nitrogen-filled valving
• Anodized 6061-T6 billet aluminum mounts
• Individually dyno-tested and cycle-tested bushing systems
• Made in the USA
• Manufacturer Part Number: E86-82-099-02-22

Fits all 2022-2026 Toyota Tundra models, including SR, SR5, Limited, Platinum, 1794 Edition, Capstone, and TRD Pro.

The Eibach PRO-TRUCK-LIFT Stage 2R is a complete suspension solution engineered for superior off-road damping and control. This system bridges the gap between daily drivability and trail performance by pairing height-adjustable PRO-TRUCK Coilover 2.0 units at the front with PRO-TRUCK Reservoir Sport Shocks at the rear. The external reservoirs on the rear dampers provide increased oil capacity and improved cooling for consistent performance during extended use on rough terrain.

• Front height-adjustable coilovers paired with Eibach PRO-LIFT-KIT springs
• Rear PRO-TRUCK Reservoir Sport Shocks for enhanced heat dissipation and travel
• Large 46mm pistons with a monotube design for rapid response
• Nitrogen-filled variable force valving to maintain stability across different surfaces
• Anodized 6061-T6 billet aluminum coilover mounts for high-strength durability
• Individually dyno-tested to ensure matched performance and reliability
• Heavy-duty bushing system cycle tested for long-term service life
• Engineered and manufactured by Eibach in the U.S.A.
• Manufacturer Part Number: E86-82-096-02-22

Fits 2022-2025 Toyota Tundra Limited, SR, and SR5 models.

Eibach PRO-TRUCK COILOVER 2.0 systems are engineered to provide improved handling and increased ground clearance for the Toyota Tundra XK70. Utilizing an extended-travel monotube design and nitrogen-filled variable force valving, these coilovers deliver precise on-road control and the compliance needed for maximum traction on the trails. Each assembly features an adjustable threaded spring perch to accommodate heavier loads and offer maximum tire clearance.

These front coilovers come pre-assembled with ERO Off-Road Race Springs and anodized 6061-T6 billet aluminum mounts for a direct-replacement installation that requires no additional factory parts. Every unit is individually dyno-tested to ensure matched performance across the pair and long-term reliability in harsh environments.

• Extended-travel 46mm piston monotube design
• Nitrogen-filled variable force valving for adaptive damping
• Adjustable threaded spring perch for height customization
• Anodized 6061-T6 billet aluminum mounts
• Equipped with Eibach ERO Off-Road Race Springs
• Heavy-duty bushing system cycle-tested for durability
• Pre-assembled for straightforward bolt-on installation
• Manufactured by Eibach in the U.S.A.
• Sold as a pair
• Manufacturer Part Number: E86-82-096-01-20

Fits 2003-2009 Toyota 4Runner (Limited, Sport, SR5) and 2007-2009 Toyota FJ Cruiser (V6-4.0L).

The Eibach PRO-TRUCK-LIFT STAGE 2 System is an engineered suspension solution for drivers seeking a balance between highway stability and technical trail performance. This Stage 2 upgrade builds upon the Stage 1 kit by introducing adjustable front 2.0 coilovers, allowing you to fine-tune your front ride height between 1.5 and 4 inches to accommodate varying loads or larger tire fitments. The system includes rear Sport Shocks and Pro-Lift-Kit Springs to maintain rear-end control and lift.

Utilizing an extended-travel monotube design with a 46mm piston, these coilovers feature nitrogen-filled variable force valving for consistent damping. Each unit is equipped with Eibach ERO Off-Road Race Springs and secured with anodized 6061-T6 billet aluminum mounts for maximum durability in harsh environments. To ensure reliability, every shock is individually dyno-tested and the heavy-duty bushing system is cycle-tested for long-term performance.

• Complete Stage 2 system: Front 2.0 Coilovers, Rear Sport Shocks, and Pro-Lift-Kit Springs
• Front Lift Height: +1.5" to 4.0" via adjustable threaded spring perch
• Rear Lift Height: +0" to 1.5"
• Monotube 46mm piston design with nitrogen-filled valving
• Anodized 6061-T6 billet aluminum mounts
• Individually dyno-tested for matched performance and reliability
• Engineered and manufactured by Eibach in the U.S.A.
• Manufacturer Part Number: E86-82-073-01-22

Fits 2003-2009 Toyota 4Runner and 2007-2009 Toyota FJ Cruiser (V6-4.0L).

The Eibach PRO-TRUCK COILOVER 2.0 system is engineered to provide superior control during on-road transit while maintaining the compliance necessary for maximum traction on the trails. Built with an extended-travel monotube design and nitrogen-filled variable force valving, these coilovers solve the compromise between daily drivability and off-road capability. The threaded spring perch allows for precise height adjustments from +1.5 to +4 inches, helping your vehicle accommodate increased loads and larger tire clearances.

• Pre-assembled for a direct factory replacement; no additional parts required for installation.
• Equipped with Eibach ERO Off-Road Race Springs for consistent performance in harsh environments.
• Monotube shock design with a 46mm piston for improved heat dissipation and damping consistency.
• Anodized 6061-T6 billet aluminum mounts and a heavy-duty bushing system cycle-tested for durability.
• Individually dyno-tested to ensure matched performance across the pair.
• Proudly engineered and manufactured by Eibach in the U.S.A.

Specifications:
MPN: E86-82-073-01-20
Lift Height: +1.5in to +4in
Piston Diameter: 46mm
Material: 6061-T6 Billet Aluminum Mounts
Design: Nitrogen-Filled Monotube

Fits 2010-2024 Toyota 4Runner 2WD and 4WD models including SR5, Limited, TRD Off-Road, TRD Pro, and Trail editions.

The Eibach PRO-TRUCK Coilover Stage 2R is a comprehensive suspension solution engineered for superior damping control and off-road reliability. This kit combines the ride height adjustability of PRO-TRUCK 2.0 front coilovers with the enhanced cooling and consistent performance of external reservoir rear shocks. Designed to handle the rigors of technical trails and high-speed washouts, the Stage 2R system replaces your factory dampers and springs with a matched, dyno-tested performance package.

• Complete Stage 2R system featuring PRO-TRUCK Coilover 2.0s, PRO-TRUCK Reservoir Sport Shocks, and Pro-Lift-Kit Springs.
• Monotube 46mm piston design with nitrogen-filled variable force valving for precise handling.
• Anodized 6061-T6 billet aluminum coilover mounts ensure maximum strength and corrosion resistance.
• External reservoir rear shocks increase oil capacity for improved heat dissipation during extended off-road use.
• Individually dyno-tested for matched performance; heavy-duty bushings cycle-tested for long-term durability.
• Made in the U.S.A. by Eibach (Manufacturer Part Number: E86-82-071-05-22).

Fits 2010-2024 Toyota 4Runner (2WD/4WD) including SR5, Limited, Trail, TRD Off-Road, TRD Pro, TRD Sport, Venture, and Nightshade models.

The Eibach PRO-TRUCK-LIFT Stage 2 System provides a comprehensive suspension upgrade, combining the front adjustability of a coilover with the proven performance of Eibach rear sport shocks and lift springs. This system utilizes an extended-travel monotube design and variable force valving to deliver composed on-road handling and maximum traction on technical trails. The front 2.0 coilovers feature a threaded spring perch, allowing you to fine-tune the ride height to accommodate increased loads from heavy bumpers, winches, or accessories.

• Front Pro-Truck Coilover 2.0s with 46mm pistons and nitrogen-filled monotube construction
• Rear Sport Shocks and Pro-Lift-Kit Springs included
• Anodized 6061-T6 billet aluminum coilover mounts
• Equipped with Eibach ERO Off-Road Race Springs
• Individually dyno-tested for matched performance and reliability
• Heavy-duty bushing system cycle-tested for long-term durability
• Engineered and manufactured by Eibach in the USA
• Manufacturer Part Number: E86-82-071-01-22

Fits 2010-2024 Toyota 4Runner models including SR5, Limited, Trail, TRD Off-Road, TRD Pro, TRD Sport, Venture, and Nightshade.

The Eibach PRO-TRUCK COILOVER 2.0 system is engineered to provide precision control during on-road transit while maintaining the compliance necessary for maximum traction on technical trails. Utilizing an extended-travel monotube design and nitrogen-filled variable force valving, these coilovers address the damping limitations of factory suspension. The adjustable threaded spring perch allows users to accommodate increased loads from aftermarket accessories while maximizing ground clearance.

Each unit comes pre-assembled with Eibach ERO Off-Road Race Springs, allowing for a direct bolt-on installation that requires no additional parts or a spring compressor. These coilovers are individually dyno-tested to ensure matched performance across the axle and are built with a heavy-duty bushing system cycle-tested for long-term durability in harsh environments.

• 46mm piston monotube design with nitrogen-filled variable force valving
• Anodized 6061-T6 billet aluminum mounts for superior strength and corrosion resistance
• Equipped with Eibach ERO Off-Road Race Springs
• Adjustable threaded spring perch to accommodate varied loads and height requirements
• Pre-assembled for a straightforward factory-direct replacement
• Individually dyno-tested for performance matching and reliability
• Designed and manufactured by Eibach in the U.S.A.
• Sold as a pair (Front)
• Manufacturer Part Number: E86-82-071-01-20