The Eibach ERS 2.25-inch Inside Diameter (ID) Coilover Spring Coupling Spacer is a critical component for fine-tuning dual-spring suspension systems. This spacer acts as a secure seat and coupler between a main spring and a tender or helper spring, ensuring proper alignment and a smooth transition during compression.

Manufactured from high-strength aluminum, each spacer is CNC precision-machined to maintain exact tolerances required for racing applications. The lightweight design is finished with a durable anodized coating to resist wear and corrosion in harsh track environments. This coupling spacer is an essential accessory for racers looking to optimize their spring stack performance.

• Specifically designed for 2.25-inch (57mm) inside diameter ERS springs
• Functions as a coupler between main and tender/helper springs
• CNC precision-machined for accurate spring seating
• Lightweight and durable anodized aluminum construction
• Part of the Eibach Race Spring (ERS) system
• Manufacturer Part Number: SPACER225

Fits select 2016-2021 Can-Am Maverick X3, Polaris RZR and General, Textron Wildcat XX, and Yamaha YXZ1000R models. This Eibach Pro-UTV spring slider hardware kit is engineered to optimize the performance of your dual-rate spring setup, ensuring a smooth and reliable transition between primary and secondary springs.

Constructed from Ultra-High-Molecular-Weight Polyethylene (UHMWPE), these sliders provide a low-friction interface that resists wear and protects your shock bodies even in extreme off-road conditions. This kit is specifically designed for 2.50-inch shocks equipped with 3.0-inch inner diameter (I.D.) springs, providing the precise tolerances required for professional-grade suspension tuning.

• Designed for 2.50" shock bodies using 3.0" I.D. springs
• Manufactured from durable, low-friction Ultra-High-Molecular-Weight Polyethylene (UHMWPE)
• Maintains proper spring alignment and transition timing
• Manufacturer Part Number: SLIDER250-300

Fits select 2014-2016 Polaris RZR 900 and RZR S 1000 models.

The Eibach PRO-UTV Slider Hardware Kit is engineered to optimize the performance and reliability of your dual-rate spring system. This slider ensures a smooth, consistent transition between the secondary and primary spring rates, allowing you to maintain better control through diverse terrain. Precision-manufactured from Ultra-High-Molecular-Weight (UHMW) Polyethylene, this component offers superior impact resistance and low-friction operation to protect your shock bodies from premature wear.

• Specifically designed for 2.0" shocks utilizing 2.50" I.D. springs
• Construction: Ultra-High-Molecular-Weight (UHMW) Polyethylene
• Low-friction material reduces drag and heat buildup during suspension cycling
• Provides a secure interface between dual-rate springs
• Manufacturer Part Number: SLIDER200-250

Fits select 2001-2013 BMW 7 Series, X3, and X5 models.

Improve your vehicle's stability, handling, and aesthetics with the Eibach Pro-Spacer system. These 30mm wheel spacers widen the track width to lower the center of gravity and reduce body roll during cornering. By pushing the wheels further out from the hub, they also provide the necessary clearance for oversized tires or upgraded performance brake kits while giving your BMW a more commanding stance.

Each spacer is precision-engineered with a hub-centric design to ensure perfect wheel balance and a vibration-free ride. Constructed from high-strength aircraft-grade aluminum alloy, the Pro-Spacer offers a significant weight advantage over steel spacers without sacrificing structural integrity.

• Thickness: 30mm
• Bolt Pattern: 5x120
• Hub Center Bore: 72.5mm
• Material: High-Strength Aircraft-Aluminum Alloy
• Includes: Pair of 2 spacers and necessary mounting hardware
• Manufacturer Part Number: S90-7-30-003

Fits select 1982-2013 BMW 1 Series, 3 Series, 5 Series, 6 Series, 7 Series, 8 Series, M3, Z3, and Z4. This kit provides a 30mm track width increase per side to improve vehicle stability, handling, and cornering performance.

Eibach PRO-SPACER wheel spacers are the perfect solution for achieving a flush wheel-to-fender fitment or creating necessary clearance for aftermarket suspension components and larger brake kits. By widening the track width, these spacers lower the effective center of gravity and reduce body roll during spirited driving. Each spacer is precision-engineered with a hub-centric design to ensure perfect wheel balance and a vibration-free ride.

• Precision Engineered: Hub-centric fitment ensures a perfect match to the 72.5mm factory hub for optimal balance.
• High-Strength Material: Manufactured from high-tensile-strength aircraft-aluminum alloy for durability and safety.
• Weight Optimized: Significantly lighter than comparable steel spacers to minimize unsprung weight.
• Corrosion Resistance: Durable finish protects against the elements and road salt.
• Complete Kit: Includes two 30mm spacers and all required mounting hardware.
• MPN: S90-7-30-002

Fits select 2008-2023 Audi and Mercedes-Benz models including A4, A5, A6, A7, S4, S5, C300, C350, E300, and GLA250.

The Eibach Pro-Spacer is the essential bridge between performance and aesthetics. By widening your vehicle's track width, these 20mm spacers lower the center of gravity and reduce body roll for more predictable handling. Precision-engineered for a hub-centric fit, these spacers ensure perfect wheel balance and eliminate the vibration common with generic, non-hub-centric alternatives. Whether you are seeking clearance for upgraded brakes or looking to flush your wheel fitment with the fender line, the Pro-Spacer provides a professional-grade solution.

• Manufactured from high-strength aircraft-aluminum alloy for maximum durability
• Precision-engineered hub-centric design (66.5mm) for a perfect fit and vibration-free operation
• Significant weight savings compared to traditional steel wheel spacers
• Enhanced stability and cornering grip by increasing the vehicle's footprint
• Corrosion-resistant finish for long-lasting protection
• Bolt Pattern: 5x112
• Thickness: 20mm
• Hub Center: 66.5mm
• Manufacturer Part Number: S90-7-20-016

Fits select 2012-2019 Fiat 500 models, including Abarth, Turbo, Pop, Lounge, Sport, and 500e.

Eibach PRO-SPACER wheel spacers provide a precision-engineered solution for improving vehicle stability, handling, and aesthetics. By widening your vehicle's track width, these spacers lower the center of gravity and reduce body roll, resulting in more predictable cornering performance. They are the ideal choice for enthusiasts looking to eliminate unsightly wheel-to-fender gaps or provide necessary clearance for larger aftermarket brake components and tires.

Every PRO-SPACER is manufactured from high-strength aircraft-grade aluminum alloy, offering a significant weight advantage over traditional steel spacers while maintaining exceptional durability. The hub-centric design ensures a perfect fit to the factory hub, maintaining wheel balance and preventing the vibrations often associated with generic, lug-centric alternatives.

• Widens track for improved handling and cornering stability
• Precision hub-centric design ensures perfect wheel balance
• Manufactured from high-strength aircraft-grade aluminum alloy
• Reduced weight compared to steel alternatives
• Corrosion-resistant finish for long-term durability
• Bolt Pattern: 4x98
• Thickness: 20mm
• Hub Center: 58mm
• Manufacturer Part Number: S90-7-20-012

Fits select 2003-2022 Acura TSX and Honda Accord and Civic models.

Eibach Pro-Spacer wheel spacers are the engineered solution for drivers looking to increase vehicle stability while achieving a more flush, aggressive wheel fitment. By widening the track width, these spacers effectively lower the center of gravity and reduce body roll during cornering. This improves overall handling performance on the street or the track without the need for new wheels.

Precision-engineered with a hub-centric design, these spacers ensure perfect wheel balance and a vibration-free ride. Every Pro-Spacer is manufactured from high-strength aircraft-aluminum alloy, providing significant weight savings and superior durability compared to traditional steel spacers.

• Widens vehicle track for improved handling and cornering stability
• Precision-engineered hub-centric design for perfect fit and wheel balance
• Manufactured from high-strength aircraft-aluminum alloy
• Corrosion-resistant finish for long-term durability
• Bolt Pattern: 5x114.3
• Thickness: 20mm
• Hub Center: 64mm
• Manufacturer Part Number: S90-6-20-015

Fits select 2015-2026 Ford Explorer and Mustang models. These Eibach Pro-Spacer wheel spacers are engineered to widen your vehicle's track width, providing a significant increase in stability and a more aggressive, flush stance. By moving the wheels outward, these spacers lower the effective center of gravity and reduce body roll during cornering for improved handling performance.

Each spacer is precision-machined from high-strength aircraft-grade aluminum alloy, offering a significant weight advantage over traditional steel spacers while maintaining high structural integrity. The hub-centric design ensures a perfect fit to the factory hub, maintaining wheel balance and preventing the vibrations often associated with generic, lug-centric spacers.

• Thickness: 15mm
• Finish: Black Anodized
• Material: High-Strength Aircraft-Aluminum Alloy
• Design: Precision Engineered Hub-Centric for vibration-free performance
• Contents: Kit includes two (2) spacers and all necessary mounting hardware
• MPN: S90-6-15-056-B

Whether you are looking to clear larger brake calipers, accommodate wider tires, or simply improve your vehicle's aesthetic and lateral stability, the Eibach Pro-Spacer system provides a reliable, bolt-on solution.

Fits select 2003-2022 Acura TSX and Honda Accord/Civic models. The Eibach Pro-Spacer Kit (S90-6-15-038) is the ideal solution for widening your vehicle's track width to improve stability, handling, and cornering performance. By moving the wheels out from the hub, these spacers lower the center of gravity and reduce body roll for a more planted feel during spirited driving.

Beyond performance, these 15mm spacers allow for increased clearance for larger tires or aftermarket brake kits and provide a flush, aggressive fitment by aligning the wheels with the fender flares. Every Pro-Spacer is precision-engineered using high-strength aircraft-aluminum alloy, providing significant weight savings compared to traditional steel spacers while maintaining high structural integrity.

• Thickness: 15mm
• Bolt Pattern: 5x114.3
• Hub Bore: 64mm
• Construction: High-strength aircraft-aluminum alloy
• Design: Precision hub-centric engineering for perfect wheel balance and vibration-free operation
• Finish: Durable protective coating for corrosion resistance
• Manufacturer Part Number: S90-6-15-038

Fits select 2001-2026 Lexus and Toyota models including GS, IS, Avalon, Camry, GR Corolla, Prius, and RAV4.

Eibach PRO-SPACER wheel spacers are the essential upgrade for drivers looking to improve vehicle stability, handling, and aesthetics. By increasing the track width by 15mm, these spacers lower the center of gravity and reduce body roll for more composed cornering. The wider stance also allows for additional clearance when installing larger aftermarket wheel and tire packages or upgrading to high-performance brake systems.

Machined from high-strength aircraft-grade aluminum alloy, these spacers are significantly lighter than traditional steel alternatives while maintaining superior durability. Every PRO-SPACER is precision-engineered with a hub-centric design to ensure perfect wheel balance and a vibration-free ride by centering the wheel directly on the hub flange.

• Manufacturer Part Number: S90-6-15-034
• Thickness: 15mm
• Bolt Pattern: 5x114.3
• Center Bore: 60mm
• Material: High-strength aircraft-aluminum alloy
• Design: Hub-centric for precise fitment and balance

Fits 2005-2013 Chevrolet Corvette models, including Base, Z06, ZR1, Grand Sport, and 427 special editions.

The Eibach Pro-Spacer System (MPN: S90-6-15-033) is engineered to improve vehicle stability and provide a more aggressive, flush stance. By widening the track width by 15mm, these spacers lower the effective center of gravity and reduce body roll during cornering. Unlike universal alternatives, these are precision-engineered hub-centric spacers designed specifically for the Corvette chassis to ensure perfect wheel balance and a vibration-free ride.

• Manufactured from high-strength, aircraft-grade aluminum alloy for maximum durability.
• Precision hub-centric design (70.1mm) ensures exact centering for factory and aftermarket wheels.
• Significant weight reduction compared to conventional steel wheel spacers.
• 15mm thickness provides additional clearance for upgraded suspension or braking components.
• Durable finish resists corrosion and environmental wear.

Technical Specifications:

• Manufacturer Part Number: S90-6-15-033
• Thickness: 15mm
• Bolt Pattern: 5x120.65
• Hub Bore: 70.1mm
• Material: Aircraft-Aluminum Alloy

Fits select 1990-2020 Mazda Miata, MX-5 Miata, and MX-3 models.

The Eibach Pro-Spacer System (MPN: S90-6-15-010) is a precision-engineered solution for improving vehicle stability and achieving a flush wheel-to-fender fitment. By increasing the track width by 15mm per side, these spacers lower the center of gravity and reduce body roll, enhancing cornering grip and overall handling dynamics for street or track use.

Every Pro-Spacer is manufactured from high-strength aircraft-aluminum alloy, providing significant weight savings compared to steel spacers without sacrificing structural integrity. The hub-centric design is specifically tailored to the 54.1mm hub bore to ensure optimal wheel balance and eliminate steering wheel vibration.

• Thickness: 15mm
• Bolt Pattern: 4x100
• Hub Bore: 54.1mm
• Material: High-strength aircraft-aluminum alloy
• Design: Hub-centric for vibration-free performance
• Quantity: Set of 2
• Manufacturer Part Number: S90-6-15-010

Fits 2017-2025 Tesla Model 3 and Model Y.

Eibach Pro-Spacer wheel spacers are the engineered solution for widening your vehicle's track width to improve both stability and aesthetics. By pushing the wheels further out from the hub, these 10mm spacers lower the effective center of gravity and reduce body roll during cornering. This specific kit (MPN: S90-6-10-032-N-B) features a hub-centric design to ensure a perfect fit and precise wheel balance, eliminating the vibration issues common with non-centric alternatives.

• Precision Engineering: Hub-centric design specifically tailored for 64mm hubs to maintain factory-level wheel balance.
• High-Strength Construction: Forged from aircraft-grade aluminum alloy for a high strength-to-weight ratio.
• Lightweight Design: Significantly lighter than steel spacers to keep unsprung weight to a minimum.
• Corrosion Resistance: Durable black anodized finish protects against the elements and maintains a clean look behind the wheel.
• Handling & Clearance: Widens stance for increased lateral stability and provides necessary clearance for larger aftermarket wheel or tire setups.

Specifications:

• Part Number: S90-6-10-032-N-B
• Thickness: 10mm
• Bolt Pattern: 5x114.3
• Hub Bore: 64mm
• Finish: Black

Fits select 2006-2026 Mazda MX-5 Miata, Kia Stinger, and Genesis G70 models.

The Eibach Pro-Spacer System (MPN: S90-6-10-019) is a precision-engineered suspension upgrade designed to improve vehicle stability and achieve a flush, aggressive stance. By widening the track width, these 10mm spacers lower the effective center of gravity and reduce body roll, enhancing cornering performance and road-holding capability. Each spacer features a hub-centric design, ensuring the wheel remains perfectly centered on the hub to prevent the vibrations often associated with generic spacers.

Constructed from high-strength aircraft-grade aluminum alloy, these spacers provide the durability required for performance applications while remaining significantly lighter than steel alternatives. This reduced unsprung weight helps maintain suspension responsiveness. These spacers are the ideal solution for gaining clearance for larger brake calipers or simply filling out the wheel wells for a custom look.

• Thickness: 10mm
• Bolt Pattern: 5x114.3
• Hub Center: 67.1mm
• Material: High-strength aircraft-aluminum alloy
• Manufacturing: Precision-engineered hub-centric fit
• Benefit: Improved handling and reduced body roll
• Manufacturer Part Number: S90-6-10-019

Fits select 2003-2022 Acura TSX, Honda Accord, and Honda Civic models (2.0L).

Eibach PRO-SPACER wheel spacers are engineered to improve your vehicle's stability and handling while providing a more aggressive, flush appearance. By widening the track width, these spacers lower the effective center of gravity and reduce body roll during cornering. This additional clearance is also essential when installing larger tires or aftermarket brake kits that may otherwise interfere with factory components.

These spacers are precision-engineered with a hub-centric design to ensure a perfect fit and maintain original wheel balance, preventing the vibrations often associated with generic, lug-centric alternatives. Manufactured from high-strength aircraft-aluminum alloy, they offer significant weight savings compared to traditional steel spacers without compromising structural integrity.

• Manufacturer Part Number: S90-6-10-012
• Precision-engineered hub-centric design for vibration-free performance
• Constructed from high-strength aircraft-aluminum alloy
• Corrosion-resistant finish for long-term durability
• Reduces body roll and improves lateral stability by widening track width
• Replaces restrictive factory clearances for larger wheel and tire setups

Fits select 1995-2010 Chrysler PT Cruiser, Sebring, and Dodge Neon models. See the fitment table below for full compatibility details.

Eibach Pro-Spacer wheel spacers are engineered to improve vehicle stability and handling by widening the track width. By moving the wheels out flush with the fender, these spacers lower the center of gravity and reduce body roll during cornering. This 10mm kit is the ideal solution for fine-tuning your stance, providing extra clearance for upgraded suspension components or larger brake calipers while achieving a more aggressive, flush look.

• Precision Engineering: Hub-centric design ensures a perfect fit and maintains critical wheel balance to eliminate vibration.
• Premium Materials: Manufactured from high-strength, aircraft-grade aluminum alloy for maximum durability and significant weight savings over steel spacers.
• Corrosion Resistance: Finished with a protective coating to withstand harsh road conditions and prevent seizing.
• Improved Dynamics: Widening the stance enhances lateral stability and provides more predictable handling characteristics.

Specifications:
- Thickness: 10mm
- Bolt Pattern: 5x100
- Hub Center Bore: 57.1mm
- Manufacturer Part Number: S90-6-10-006

Fits select 2003-2026 Genesis GV60, Hyundai Genesis Coupe and Ioniq 5, Kia Optima, and Mazda 3, 6, and RX-8 (2.0T).

Eibach Pro-Spacer wheel spacers are the ideal solution for widening your vehicle's track width to improve stability, handling, and aesthetics. By moving the wheels outboard to be flush with the fender line, these spacers lower the effective center of gravity and reduce body roll during cornering. They also provide the necessary clearance for larger brake kits or aftermarket suspension components that might otherwise interfere with factory wheel offsets.

• Precision Hub-Centric Design: Engineered for a perfect fit and consistent wheel balance, ensuring a vibration-free ride.
• High-Strength Construction: Manufactured from aircraft-grade aluminum alloy for maximum durability and significant weight savings over traditional steel spacers.
• Enhanced Stance: Provides a wider, more aggressive look while improving mechanical grip and lateral stability.
• Specifications: 10mm thickness, 5x114.3 bolt pattern, and 67.1mm hub center bore.
• Manufacturer Part Number: S90-6-10-005

Fits select 2003-2025 Nissan 350Z, 370Z, Z, and Murano, and 2007-2013 Infiniti G35 and G37 models.

The Eibach Pro-Spacer is an essential upgrade for drivers looking to improve vehicle stability, handling, and aesthetics. By widening the track width, these spacers lower the center of gravity and reduce body roll during cornering. This additional width also provides the necessary clearance for larger aftermarket wheel and tire setups or high-performance brake kits.

Precision-engineered for a perfect hub-centric fit, these spacers ensure wheel balance is maintained for vibration-free operation. They are manufactured from high-strength aircraft-grade aluminum alloy, offering a significant weight savings compared to traditional steel spacers without compromising structural integrity. Each kit is designed to bolt directly to the factory hub, providing a commanding stance and enhanced road feel.

• Thickness: 10mm
• Hub-Centric design for precise fit and wheel balance
• Manufactured from high-strength aircraft-aluminum alloy
• Reduced unsprung weight compared to steel alternatives
• Durable finish for long-term corrosion resistance
• Manufacturer Part Number: S90-6-10-004

Fits select 1993-2026 Subaru Impreza (including WRX and STI), BRZ, Toyota 86, GR86, and Scion FR-S. These Eibach Pro-Spacer wheel spacers are engineered to widen your vehicle's track width, providing a more stable footprint and an aggressive, flush stance.

Manufactured from high-strength aircraft-grade aluminum alloy, these spacers offer significant weight savings compared to traditional steel components while maintaining exceptional durability. The hub-centric design ensures a precise fit to the 56mm factory hub, maintaining wheel balance and eliminating vibration. These 10mm spacers are an ideal solution for increasing clearance for larger brake calipers or suspension components and reducing body roll by lowering the effective center of gravity.

• Thickness: 10mm
• Bolt Pattern: 5x100
• Hub Center Bore: 56mm
• Material: High-strength aircraft-aluminum alloy
• Finish: Precision-machined for exact tolerances
• Manufacturer Part Number: S90-6-10-003

Fits select 2005-2023 Chrysler 300, Dodge Challenger, Dodge Charger, and Dodge Magnum.

Improve your vehicle's stance and handling with the Eibach Pro-Spacer System. These 30mm spacers widen the track width to lower the center of gravity and reduce body roll, providing a more stable and aggressive driving experience. Precision-engineered with a hub-centric design, these spacers ensure a perfect fit and maintain factory-level wheel balance, preventing the vibrations often associated with lower-quality universal alternatives.

Manufactured from a high-strength aircraft-aluminum alloy, these spacers offer significant weight savings over traditional steel components while maintaining the durability required for performance driving. Whether you are seeking additional clearance for larger brake kits or simply want to flush your wheels with the fenders, the Pro-Spacer system is the professional's choice for wheel fitment.

• Thickness: 30mm
• Bolt Pattern: 5x115
• Hub Bore: 71.4mm
• Material: High-Strength Aircraft-Aluminum Alloy
• Finish: Durable Protective Coating
• System Type: System 4 (Includes integrated studs)
• Manufacturer Part Number: S90-4-30-017

Kit Includes: Two (2) wheel spacers and all necessary mounting hardware for installation.

Fits 2015-2026 Ford Mustang and 2023-2026 Ford Explorer models across all trims including EcoBoost, GT, Dark Horse, and ST.

The Eibach Pro-Spacer System is the engineered solution for widening your vehicle's track width by 25mm. By moving the wheels further outboard, these spacers lower the effective center of gravity and reduce body roll for improved cornering stability. The hub-centric design ensures a precise fit to the factory hub, maintaining perfect wheel balance and preventing vibration at highway speeds.

Constructed from high-strength aircraft-aluminum alloy, these spacers provide a significant weight advantage over steel alternatives while offering the durability required for performance driving. The black anodized finish provides a clean look and superior corrosion resistance. This kit comes complete with two spacers and the necessary hardware for a straightforward installation to factory mounting points.

• Part Number: S90-4-25-063-B
• Spacer Width: 25mm
• Finish: Black Anodized
• Material: High-strength aircraft-aluminum alloy
• Design: Hub-centric for vibration-free fitment
• Included: Pair of spacers (2) and mounting hardware

Fits select 2015-2026 Ford Mustang and 2020-2026 Ford Explorer models.

The Eibach Pro-Spacer System (MPN: S90-4-25-063) is the definitive solution for drivers looking to improve vehicle stability, handling, and aesthetics. By widening the track width by 25mm, these spacers lower the center of gravity and reduce body roll during cornering. This additional spacing also provides the necessary clearance required for larger aftermarket wheel and tire setups or to achieve a flush fender-to-wheel fitment.

Every Pro-Spacer is precision-engineered using a hub-centric design, ensuring the wheel is perfectly centered on the axle to eliminate vibration and maintain factory-level wheel balance. Constructed from high-strength aircraft-grade aluminum alloy, these spacers offer a significant weight advantage over traditional steel alternatives without compromising structural integrity.

• Width: 25mm thickness
• Design: Hub-centric for vibration-free performance
• Material: High-strength aircraft-aluminum alloy
• Hardware: Includes all necessary mounting hardware
• Quantity: Kit includes 2 spacers (one axle)
• Part Number: S90-4-25-063

Installation is straightforward, utilizing factory mounting points to provide a wider, more commanding stance both on-road and off-road.

Fits select 2005-2023 Chrysler 300, Dodge Challenger, Dodge Charger, and Dodge Magnum.

The Eibach PRO-SPACER System is the essential upgrade for drivers looking to improve vehicle stability while achieving a flush, aggressive stance. By widening the track width, these spacers lower the effective center of gravity and reduce body roll during cornering. This 25mm kit provides the necessary clearance for larger aftermarket wheel and tire setups or high-performance braking systems that might otherwise interfere with factory suspension components.

Precision engineered with a hub-centric design, these spacers ensure a perfect fit and maintain original wheel balance, eliminating the vibrations often associated with generic, lug-centric alternatives. Manufactured from high-strength aircraft-aluminum alloy, they offer significant weight savings over traditional steel spacers without compromising structural integrity or safety.

• Thickness: 25mm
• Bolt Pattern: 5x115
• Hub Center Bore: 71.4mm
• Material: High-strength aircraft-aluminum alloy
• Corrosion-resistant finish for long-term durability
• Kit includes two (2) spacers and all necessary mounting hardware
• Manufacturer Part Number: S90-4-25-030

Fits select 2001-2026 Lexus GS and IS models, along with Toyota Avalon, Camry, Corolla, Prius, and RAV4.

Enhance your vehicle's stability and cornering performance with Eibach Pro-Spacer wheel spacers. By widening the track width, these spacers lower the effective center of gravity and reduce body roll, providing more predictable handling. They are an ideal solution for achieving a flush wheel-to-fender fitment or increasing clearance for larger tires and aftermarket brake components.

Each spacer is precision-engineered with a hub-centric design to ensure perfect wheel balance and a vibration-free ride. Manufactured from high-strength, aircraft-grade aluminum alloy, these spacers offer significant weight savings over steel alternatives while maintaining extreme durability for both street and performance applications.

• Manufacturer Part Number: S90-4-25-029
• Thickness: 25mm
• Bolt Pattern: 5x114.3
• Hub Center: 60mm
• Material: High-Strength Aircraft-Aluminum Alloy
• Inclusions: Kit includes 2 spacers and all necessary mounting hardware

Fits select 1993-2026 Subaru, Toyota, and Scion models including Impreza, WRX, BRZ, 86, and GR86.

Eibach Pro-Spacer wheel spacers are the ideal solution for widening your vehicle's track width to improve stability, handling, and aesthetics. By increasing the distance between the wheels, these spacers lower the effective center of gravity and reduce body roll during cornering. They also provide the necessary clearance for larger aftermarket brake kits or wider tires while giving your vehicle a more commanding, flush-to-fender appearance.

• Precision-engineered hub-centric design for a perfect fit and vibration-free wheel balance.
• Manufactured from high-strength aircraft-grade aluminum alloy for maximum durability and strength.
• Significant weight reduction compared to steel spacers, helping to minimize unsprung mass.
• High-quality corrosion protection for long-lasting performance in all driving environments.
• Kit includes two (2) spacers and all required mounting hardware for a complete axle installation.

Specifications:

• Thickness: 25mm
• Bolt Pattern: 5x100
• Hub Bore: 56mm
• Manufacturer Part Number: S90-4-25-017