Fits 2002-2005 Nissan Altima and 2002-2006 Nissan Sentra SE-R Spec V.

Upgrade your vehicle's shifting precision with the Fidanza short throw shifter (MPN 891845). Engineered to reduce the distance between gear gates, this assembly provides a shorter, more mechanical throw for faster gear changes and a more tactile connection to the transmission. By replacing the factory shifter, you eliminate the vague, soft feel common in high-mileage OE components.

This performance shifter is designed to bolt into the factory location and can be installed in an afternoon in your driveway using basic hand tools. It is a direct-fit solution for enthusiasts looking to improve driver feedback during spirited street driving or track use.

• Manufacturer Part Number: 891845
• Reduces shifter throw for faster, more precise gear engagement
• Direct replacement for the factory shifter assembly
• Easy installation using standard hand tools
• Retains factory mounting points

The Fidanza Short Throw Shifter (MPN 891844) is engineered to reduce gear lever travel, providing quicker transitions between gears and a more connected, mechanical feel. By shortening the shift throw, this upgrade helps eliminate the vague, long-distance shifting characteristic of the factory unit, which is essential for performance driving or track use on the S13 and S14 chassis.

• Reduces shift throw distance for faster, more precise gear engagement
• Direct bolt-on replacement for the factory shifter assembly
• Constructed for high durability and tight tolerances
• Provides a tactile and responsive shifting experience
• Designed specifically for the 1989-1998 Nissan 240SX
• Manufacturer Part Number: 891844

Fits 1991-2001 Nissan Sentra, 200SX, Altima, Maxima, NX, and Infiniti G20 (Select trims/engines).

The Fidanza Short Throw Shifter (MPN 891837) is engineered to optimize your transmission's shift linkage, reducing the throw distance between gears for faster and more precise engagement. This direct-replacement shifter eliminates the vague, rubbery feel often found in aging factory assemblies, providing a more mechanical and connected driving experience. Designed for straightforward installation, it can be fitted using standard hand tools in a single afternoon.

• Reduces shift throw for quicker, more efficient gear changes
• Direct bolt-in replacement for factory shifter components
• Compatible with 1991-2001 Nissan and Infiniti manual transmissions
• Improves tactile feedback and shifting precision
• Manufacturer Part Number: 891837

Detailed Vehicle Compatibility:

• 1991-1996, 1999-2001 Infiniti G20 (Base, T)
• 1995-1998 Nissan 200SX (Base, SE, SE-R)
• 1993-2001 Nissan Altima (GXE, SE, XE)
• 1995-2001 Nissan Maxima (GXE, SE, SE 20th Anniversary)
• 1991-1993 Nissan NX (SE, XE)
• 1991-2001 Nissan Sentra (Base, CA, E, GLE, GXE, Limited Edition, SE, SE-R, XE)

Fits select 1990-2000 Mazda Miata models (Base, LE, LS, M Edition, SE).

The Fidanza short throw shifter is engineered to enhance the driving experience of your NA or NB Mazda Miata by reducing the distance the lever travels between gears. This modification provides a crisper, more mechanical shift feel, allowing for more precise gear engagement during both daily driving and spirited use. Designed as a direct-fit component, it serves as a straightforward performance upgrade for the factory shifting mechanism.

• Reduces shifter throw for faster and more accurate gear changes
• Direct bolt-on replacement for the factory shifter assembly
• Simple installation can be completed in a few hours using basic hand tools
• Maintains compatibility with factory interior trim
• Manufacturer Part Number: 891834

Fits select 1992-2001 Ford Escort and 1992-2003 Mazda 323, MX-3, and Protege models.

Upgrade your manual transmission's performance with the Fidanza short throw shifter (MPN 891831). This precision-engineered component is designed to significantly reduce the distance your hand moves between gears, resulting in faster shifts and a more connected feel to the drivetrain. By shortening the shift throw, you minimize the time spent out of gear, allowing for quicker acceleration and more positive gear selection during daily commuting or spirited driving.

• Significantly reduces shifter throw for faster, more efficient gear changes
• Enhances shift precision and tactile feedback compared to the vague factory assembly
• Direct replacement for the OEM shifter linkage to restore a crisp feel
• Durable construction designed for long-term reliability
• Manufacturer Part Number: 891831

Fits select 2000-2004 Volkswagen Beetle, Cabrio, Golf, and Jetta (1.8T).

The Fidanza Short Throw Shifter (MPN 891830) is engineered to enhance your driving experience by reducing the gear lever's travel distance. This modification shortens the shift throw, allowing for quicker gear transitions and a more precise, mechanical engagement compared to the loose feel of a high-mileage factory shifter.

Designed for straightforward installation, this kit can be fitted in an afternoon using basic hand tools. It utilizes the factory mounting points and maintains compatibility with OE shift knobs and boots for a clean, integrated look.

• Manufacturer Part Number: 891830
• Significant reduction in shift throw length for faster gear changes
• Improved tactile feedback and shifting precision
• Direct replacement for the factory shift lever
• DIY-friendly installation in your driveway or garage
• Retains factory shifter ergonomics and boot fitment

Fits 1996-2006 Subaru Impreza and 1997-2003 Subaru Legacy (Select trims including WRX, RS, L, and GT).

The Fidanza Short Throw Shifter (MPN: 891829) is designed for enthusiasts who want to tighten up their gear changes. By reducing the physical distance the shift lever travels between gears, this component allows for faster, more precise shifts. It replaces the worn factory assembly to eliminate excess play and provide a more mechanical, connected feel during spirited driving.

• Reduces shift throw distance for improved gear engagement speed
• Provides a crisper, more tactile shifting experience compared to OE
• Designed to bolt into the factory location for straightforward installation
• Manufacturer Part Number: 891829

Whether you are restoring a classic Impreza RS or sharpening the performance of a GD-chassis WRX, this shifter provides the ergonomic improvement needed for better transmission control.

Fits 1989-1995 Toyota MR2 Base, GT, Super Charged, and Turbo models.

The Fidanza short throw shifter (MPN 891828) is designed to enhance the driving dynamics of the mid-engine Toyota MR2 by significantly reducing the travel distance required to engage gears. By shortening the shift throw, this component provides a more mechanical and precise feel, allowing for faster gear changes and improved response during performance driving.

• Reduces shift throw for quicker, more positive gear engagement
• Direct bolt-on installation using factory mounting points
• Compatible with naturally aspirated, supercharged, and turbocharged models
• Constructed for durability and consistent shift feel
• Manufacturer Part Number: 891828

Fits 1993-1998 Toyota Supra Twin Turbo.

The Fidanza Short Throw Shifter (MPN 891827) is engineered to replace the factory unit, providing a more direct and precise connection to the transmission. By reducing the shift throw, this component allows for quicker gear transitions and eliminates the vague, rubbery feel often found in aged stock assemblies. It is a vital upgrade for MKIV Supra owners looking to improve tactile feedback and shifting speed during spirited driving.

• Direct replacement for the original shifter assembly
• Reduced throw distance for faster gear engagement
• Precision-machined construction for long-term durability
• Straightforward bolt-on installation using common hand tools
• Manufacturer Part Number: 891827

Fits 1990-1996 Nissan 300ZX (Base, 2+2, Turbo) and 2001 Mazda Protege MP3.

The Fidanza Performance short throw shifter is engineered to significantly reduce the distance your hand travels between gears, resulting in quicker and more precise shifts. By optimizing the leverage and geometry of the FS5R30A shift mechanism, this upgrade eliminates the vague, rubbery feel of the factory assembly, providing the mechanical feedback required for spirited driving and track use.

Constructed for durability and a direct fit, this shifter replaces the OE unit and can be installed in a single afternoon using standard hand tools in your driveway. It is a vital upgrade for drivers looking to sharpen the interface between their hand and the transmission.

• Reduces shift throw for faster gear engagement and improved response
• Enhances tactile feedback for a more precise, mechanical shift feel
• Designed specifically for the FS5R30A manual transmission
• Direct-fit installation requires only common hand tools
• Manufacturer Part Number: 891822

Fits select 1984-2002 BMW 3-Series (E30, E36, E46), 5-Series (E39), M3, M5, and Z3 models.

The Fidanza Short Throw Shifter (MPN 891821) is designed to significantly reduce gear lever travel for a more precise and engaging driving experience. By shortening the shift throw, this unit allows for quicker gear transitions and eliminates the vague, rubbery feel often associated with aging factory BMW shift linkages. This shifter provides a more direct mechanical connection to the transmission, improving both track performance and daily drivability.

Engineered for exact fitment, this shifter is a direct replacement for the original lever, mounting into the factory location while maintaining compatible ergonomics. It is a vital upgrade for drivers looking to tighten up their gear engagement and modernize the shift action of their classic or modern-classic BMW.

• Significant shift throw reduction for faster gear changes
• Enhanced tactile feedback and engagement precision
• Replaces worn or sloppy factory shift levers
• Direct-fit installation in factory mounting points
• Manufacturer Part Number: 891821

Fits select 1996-2006 Subaru Impreza, Legacy, and Outback models with a 5-speed manual transmission. See the fitment table below for specific submodel compatibility.

The Fidanza 5-speed short throw shifter (MPN 891819) is engineered to reduce shift throw distance and improve the overall tactile feedback of your Subaru's manual gearbox. By optimizing the leverage and geometry of the shifter assembly, this component allows for faster gear changes and more precise engagement, which is critical for both spirited driving and daily performance.

• Part Number: 891819
• Transmission Compatibility: 5-Speed Manual
• Material: High-strength construction for durability under heavy use
• Performance: Reduced throw distance for quicker shifting
• Fitment: Replaces the factory shifter on specific Impreza, Legacy, and Outback applications

Vehicle Fitment:

• 1996-2006 Subaru Impreza (2.5i, Brighton, L, LX, Outback, Outback Sport, RS, TS)
• 1997-2004 Subaru Legacy (Brighton, GT, GT Limited, L, L 30th/35th Anniversary, L SE, LSi, Outback, Outback Limited, Postal, SUS)
• 2000-2004 Subaru Outback (Base, Limited)

Fits 1995-1999 Mitsubishi Eclipse, 1995-1998 Mitsubishi Galant, and 1995-1998 Eagle Talon models.

Engineered to reduce shift throw for quicker, more precise gear transitions, the Fidanza Short Throw Shifter (891818) provides a more connected feel between the driver and the transmission. This upgrade eliminates the vague, long-travel sensation of the factory shifter, making it a vital modification for both spirited street driving and track applications. The design focuses on improved ergonomics and leverage, ensuring that every shift is crisp and positive.

Installation is straightforward and can be completed in a single afternoon using standard hand tools in your own driveway. It is designed to work with your existing interior trim for a clean, factory-plus appearance.

• Reduces shift throw for faster gear changes
• Improves shifting precision and tactile feedback
• Compatible with factory interior components
• Simple bolt-on installation with basic hand tools
• Manufacturer Part Number: 891818

Fits 1988-2000 Honda Civic, 1988-1991 Honda CRX, and 1993-1997 Honda Civic del Sol.

Upgrade your manual transmission's performance with the Fidanza Dual Bend Short Throw Shifter. This component is designed to reduce the distance the gear lever must travel between gears, allowing for faster, more precise shifts and a more connected driving feel. The dual-bend geometry is engineered to optimize ergonomics, positioning the shift knob in a more comfortable location for the driver compared to a straight-stick design.

• Reduces shift throw for quicker gear engagement
• Dual-bend design improves shifter ergonomics and reach
• Direct-fit replacement for the OE shifter assembly
• High-strength construction ensures durability during spirited driving
• Manufacturer Part Number: 891813

Fits 2000-2004 Toyota Celica GTS and MR2 Spyder Base models.

The Fidanza short throw shifter (MPN 891811) is engineered to reduce the distance your gear lever travels between gears. By optimizing the pivot point geometry, this shifter delivers a significantly shorter throw than the factory assembly, resulting in faster gear changes and a more mechanical, precise feel at the palm of your hand.

• Reduces shift throw for quicker, more consistent gear engagement
• Direct replacement for the OEM shifter lever
• Enhances tactile feedback and driver connection to the drivetrain
• Built to exacting tolerances for a bolt-on installation
• Manufacturer Part Number: 891811

Fits 2002-2006 Acura RSX (including Type-S) and 2006-2011 Acura CSX.

The Fidanza 891702 Short Throw Shifter is designed to enhance the driving experience by significantly reducing the distance the gear lever travels between gates. By optimizing the pivot point and linkage geometry, this shifter provides a shorter, more precise throw for faster gear engagement and a crisper mechanical feel compared to the factory assembly.

• Reduces shift throw for quicker, more efficient gear changes
• CNC machined construction for high durability and tight tolerances
• Direct replacement for the original equipment shifter
• Designed to maintain precise gear synchronization
• Manufacturer Part Number: 891702

Fits select 1998-2013 Audi A6 Quattro, Scion tC, and Volkswagen Passat.

Upgrade your driving experience with the Fidanza Short Throw Shifter (MPN 891135). This component is engineered to significantly reduce the distance the gear lever travels between gears, resulting in quicker, more precise shifts and a more connected feel to the transmission. By shortening the throw, it eliminates the vague, long-gate feel common in factory shifter assemblies.

Built for durability and precision, this shifter replaces the factory unit and is designed for a straightforward installation. It can be installed in a single afternoon in your own driveway using basic hand tools.

• Reduces shift throw distance for faster gear engagement
• Provides a crisper, more tactile shifting experience
• Direct replacement for the original shifter assembly
• DIY-friendly installation using standard hand tools
• Manufacturer Part Number: 891135

Fits 2007-2012 Nissan Sentra SE-R Spec V models.

Upgrade your driving experience with the Fidanza 891134 Short Throw Shifter. This component is engineered to reduce the distance your gear lever travels between gates, resulting in faster, more precise shifts. Designed for a direct replacement of the OE unit, it provides a more connected and tactile feel during spirited driving.

• Reduces shift throw for quicker gear engagement
• Compatible with factory mounting points and hardware
• Simple DIY installation: can be completed in a few hours with standard hand tools
• Durable construction designed for long-term performance
• Manufacturer Part Number: 891134

Fits 2004-2007 Cadillac CTS-V.

Upgrade your driving experience with the Fidanza Short Throw Shifter (MPN 891130), engineered to provide more precise gear engagement and a significantly reduced shift throw for the first-generation Cadillac CTS-V. This shifter replaces the factory assembly to deliver a shorter, crisper feel, eliminating the vague feedback often associated with stock high-mileage units.

Designed for a direct-fit installation, this unit is engineered to be a weekend project that can be completed in a driveway using standard hand tools. It utilizes high-quality materials to ensure long-term durability and consistent performance under spirited driving conditions.

• Reduces shift throw for faster, more positive gear changes
• Retains factory-like fitment with improved leverage geometry
• Direct replacement for the OEM shifter assembly
• Straightforward installation using basic hand tools
• Manufacturer Part Number: 891130

Secure your performance flywheel with the Fidanza Friction Plate Hardware Pack (MPN 335555). This 21-piece kit is engineered specifically for replacing the mounting hardware on Fidanza friction plates, ensuring a precise and reliable connection to the flywheel body during service or rebuilds.

Each fastener is manufactured from 1050 hardened steel, designed to withstand the high-torque and high-heat environments typical of performance drivetrains. The hardware undergoes a specialized heat-treatment process for optimum grip and extended service life, while the pickled and oiled finish provides essential protection against corrosion. Precision milled to meet strict tolerances, these components ensure your friction plate stays seated and balanced.

• Includes 21 pieces of high-strength mounting hardware (hardware only)
• Constructed from 1050 hardened steel for maximum durability
• Heat-treated for superior strength and resistance to mechanical fatigue
• Pickled and oiled finish for long-lasting corrosion protection
• Precision milled for exact fitment and high-standard tolerances
• Manufacturer Part Number: 335555

Fits 1996-2004 Ford Mustang GT, GT Bullitt, Mach 1, and SVT Cobra (4.6L).

The Fidanza Nodular Iron Flywheel (MPN 286480) provides a high-strength alternative to factory iron castings for Ford 4.6L modular engines equipped with an 8-bolt crankshaft. This flywheel is engineered to offer superior durability and heat resistance compared to standard OE components, making it an ideal choice for performance-oriented street builds and mild track use without the higher cost of billet or chromoly steel.

• High-strength nodular iron construction is significantly stronger than original equipment cast iron
• Precision machined for 8-bolt crank applications to ensure perfect balance and fitment
• Versatile design allows for compatibility with various clutch sizes
• Serviceable surface allows for limited resurfacing to extend component life
• Manufacturer Part Number: 286480

Fits 1996-2004 Ford Mustang GT, GT Bullitt, Mach 1, and SVT Cobra (4.6L).

This Fidanza nodular iron flywheel is engineered as a high-strength alternative to standard OE cast iron units. Designed specifically for Ford 4.6L modular engines equipped with a 6-bolt crankshaft flange, it provides a durable and cost-effective performance upgrade. This unit offers superior tensile strength compared to factory iron castings, making it ideal for street and mild track applications where reliability is paramount.

• Manufacturer Part Number: 286460
• Material: High-strength nodular iron construction
• Crank Bolt Pattern: 6-Bolt
• Compatibility: Engineered for use with multiple clutch sizes
• Maintenance: Allows for limited resurfacing to extend service life
• Value: More affordable than billet or chromoly steel options while exceeding OE strength

Restore the performance of your Fidanza aluminum flywheel with this 9.5-inch replacement friction plate kit (229501-20). Designed for specialty flywheel maintenance, this kit allows you to replace the worn clutch mating surface rather than the entire flywheel assembly, ensuring a consistent and reliable friction coefficient for your drivetrain.

This plate is manufactured from 1050 hardened steel and is heat-treated to provide optimum grip and exceptional service life. Each plate is precision-milled to meet high tolerances for flatness, then pickled and oiled to prevent corrosion during storage and installation. This specific 20-hole version is designed for precise fitment on Fidanza flywheel part number 110661.

• Replacement kit for Fidanza Flywheel #110661 (Verify 20-hole bolt pattern)
• Constructed from 1050 hardened steel for maximum durability
• Heat-treated friction surface for superior grip and heat dissipation
• Pickled and oiled finish for corrosion resistance and longevity
• Precision milled to meet strict flatness standards
• Includes all-new replacement hardware for secure installation
• Manufacturer Part Number: 229501-20

Fits select 1996-2010 Audi, Ford, Mazda, Mitsubishi, Nissan, and Pontiac vehicles. This Fidanza Performance friction kit allows you to refresh your existing Fidanza aluminum flywheel without the cost of replacing the entire unit.

Constructed from 1050 hardened steel, this 9.5-inch friction plate is engineered for high-heat environments and optimum clutch grip. The surface is precision milled to meet strict tolerances and is pickled and oiled to ensure longevity and corrosion resistance. This kit is specifically designed to replace the friction surface on Fidanza flywheel #110661 and includes all necessary mounting hardware for a secure installation.

• Manufacturer Part Number: 229501
• Bolt Pattern: 18-Hole
• Material: 1050 Hardened Steel
• Diameter: 9.5in / 241mm
• Finish: Heat Treated, Pickled, and Oiled
• Includes all-new mounting hardware
• Designed specifically for Fidanza Flywheel #110661

Restore the performance of your rebuildable Fidanza aluminum flywheel with the 229221 9-inch Friction Kit. This service kit is engineered to replace the primary contact surface, allowing for a complete refresh without the cost of a full flywheel replacement. The friction plate is manufactured from 1050 hardened steel, providing a high-friction surface that is heat-treated for maximum grip and long-term thermal stability.

• Constructed from 1050 hardened steel for superior durability
• Heat-treated friction plate ensures optimum grip and resistance to warping
• Precision milled to meet exacting tolerances for flatness
• Pickled and oiled finish for enhanced longevity and corrosion resistance
• Includes all-new mounting hardware and replacement center bearing
• Manufacturer Part Number: 229221

Fits select 2003-2010 Acura TSX, Chevrolet Cobalt, Chevrolet HHR, Mazda 3, Mazda 5, Mazda 6, Mazda MX-5 Miata, and Saturn Sky. This Fidanza replacement friction plate allows you to refresh your Fidanza aluminum flywheel without replacing the entire unit, restoring the critical mating surface for optimum clutch engagement and torque transfer.

Constructed from 1050 hardened steel, this plate is engineered to withstand high-heat environments and heavy-duty use. The surface is heat-treated for maximum grip and longevity, then pickled and oiled to prevent oxidation. Precision milling ensures a perfectly flat surface that meets strict tolerances for smooth operation and consistent pedal feel.

• Manufactured from 1050 hardened steel for superior durability
• Heat-treated surface provides optimum friction and long service life
• Pickled and oiled finish for corrosion resistance
• Precision milled to meet high performance standards
• Includes all-new mounting hardware for a complete installation
• Manufacturer Part Number: 229101

Maintain the high-performance engagement of your Fidanza aluminum flywheel with this 9-inch replacement friction plate kit. Engineered to restore the gripping surface of your drivetrain, this kit allows for a cost-effective rebuild without replacing the entire flywheel assembly. It features a 1050 hardened steel friction surface that has been heat-treated for optimum grip and a long service life.

This kit is specifically designed to fit Fidanza flywheel #112441 and utilizes a 20-hole bolt pattern for secure mounting. To ensure longevity and precision, each plate is milled to exact standards and is pickled and oiled to resist oxidation before installation. The package comes complete with all-new hardware to ensure a proper, high-strength connection to the flywheel body.

• Compatible with Fidanza flywheel part number 112441
• Constructed from 1050 hardened steel for maximum durability
• Heat-treated friction surface for consistent clutch engagement
• Pickled and oiled finish for corrosion resistance
• Precision milled to meet strict tolerances
• Includes all-new mounting hardware
• Manufacturer Part Number: 229001-20

Fits select 2003-2011 Hyundai Tiburon and Subaru Impreza WRX and Legacy models. This replacement friction kit allows you to refresh the surface of your Fidanza aluminum flywheel without needing to replace the entire assembly.

Constructed from 1050 hardened steel, this 9-inch friction plate is heat-treated to provide optimum grip and high-RPM durability. To ensure longevity and a perfect mating surface, the plate is pickled, oiled, and milled to exacting tolerances. Each kit includes all necessary replacement hardware to ensure a secure, flat installation on your existing flywheel.

• Manufactured from high-strength 1050 hardened steel
• Heat-treated friction surface for superior engagement and wear resistance
• Pickled and oiled finish to prevent corrosion
• Precision milled for flat, consistent contact
• Includes all-new mounting hardware
• Manufacturer Part Number: 229001

Restore the high-performance mating surface of your Fidanza aluminum flywheel with this 8.75-inch replacement friction kit. This kit allows you to refresh your flywheel's performance without the expense of replacing the entire assembly, ensuring a consistent and reliable clutch bite.

Manufactured from 1050 hardened steel, the friction plate is heat-treated to provide optimum grip and excellent thermal stability under high-stress driving conditions. Each plate is precision-milled to exacting tolerances and undergoes a pickled and oiled process to prevent corrosion and extend service life.

• Material: 1050 hardened steel for maximum durability and wear resistance.
• Surface Treatment: Heat-treated for optimum grip and long-term performance.
• Finish: Pickled and oiled to protect against oxidation.
• Precision Engineering: Milled to meet high standards for flatness and balance.
• Hardware Included: Comes with all-new hardware for a complete installation.
• Part Number: 228751

Fits select 2002-2010 Honda Civic and Mini Cooper (Base, S, and Clubman models).

The Fidanza 228591 8.5-inch replacement friction kit provides a cost-effective way to restore the performance of your aluminum flywheel without requiring a full unit replacement. Designed for high-stress applications, this friction plate is manufactured from premium 1050 hardened steel to maintain a consistent surface for aggressive clutch engagement and thermal stability.

• 1050 Hardened Steel: High-carbon steel construction offers superior durability and heat resistance under high-torque loads.
• Precision Machined: Every plate is milled to strict tolerances to ensure a perfectly flat mating surface for your clutch disc.
• Enhanced Longevity: The friction surface is heat-treated for optimum grip and then pickled and oiled to prevent corrosion.
• Complete Installation: Includes all-new hardware to ensure the plate is securely fastened to the flywheel body.
• Manufacturer Part Number: 228591