Fits select 1991-2008 Hyundai Tiburon, Nissan Sentra, and Volkswagen Golf models. This Fidanza 8.5-inch friction kit is engineered to renew the performance of your Fidanza aluminum flywheel without the need for a full flywheel replacement.

Constructed from 1050 hardened steel, the friction plate is heat-treated for optimum grip and long-term durability. Each plate is precision milled and finished with a pickled and oiled treatment to ensure longevity and consistent engagement. This kit provides a cost-effective way to restore the friction surface for high-performance driving applications.

• Replaces the friction surface on Fidanza aluminum flywheels
• Manufactured from high-strength 1050 hardened steel
• Heat-treated for superior torque capacity and wear resistance
• Pickled and oiled finish for corrosion protection
• Includes all-new mounting hardware
• Manufacturer Part Number: 228501

Note: Always confirm your bolt pattern before installation. This kit is designed for use with Fidanza flywheel part numbers: 112021, 130131, 130231, 130381, 130401, 130891, 130901, 143201, 143621, 159001, 161161, 161771, 161841, 161971, 186191, 193141, and 193241.

Fits select 1980-2013 Chevrolet vehicles, including Blazer, Camaro, Corvette, Silverado, and Express models.

Extend the life of your Fidanza aluminum flywheel with this 11-inch (Small ID) Friction Kit. Engineered as a direct replacement surface, this kit allows you to maintain high-performance clutch engagement without replacing the entire flywheel assembly. Constructed from 1050 hardened steel, the plate is heat-treated for maximum grip and wear resistance, then pickled and oiled to prevent oxidation and ensure longevity.

Each plate is precision-milled to meet strict tolerances, providing a perfectly flat mating surface for your clutch disc. The kit includes all necessary replacement hardware for a complete and secure installation.

• Material: 1050 Hardened Steel
• Size: 11-inch (Small ID)
• Heat-treated friction surface for optimum grip and long life
• Pickled and oiled finish for corrosion resistance
• Precision milled to meet high performance standards
• Manufacturer Part Number: 221101
• Includes all-new installation hardware

The Fidanza 10.25in Friction Kit (MPN 221021) provides a direct replacement surface for Fidanza performance aluminum flywheels. Built from 1050 hardened steel, this friction plate is heat-treated to provide consistent clutch disc grip and resistance to thermal warping during aggressive driving.

Each plate is pickled and oiled to ensure longevity and prevent corrosion, then precision milled to maintain flat tolerances. This kit is a complete service solution, including all-new hardware required to bolt the new friction surface to the existing aluminum flywheel body.

• Manufacturer Part Number: 221021
• Diameter: 10.25 inches
• Material: 1050 Hardened Steel
• Surface Treatment: Heat-treated, pickled, and oiled
• Construction: Precision milled for flat engagement
• Included: Friction plate and all-new mounting hardware

Fits 2007-2009 Mazda 3 Mazdaspeed.

The Fidanza 221001 10-inch friction kit provides a cost-effective way to restore your Fidanza aluminum flywheel to its original performance levels without replacing the entire unit. This kit is engineered from 1050 hardened steel, heat-treated for maximum grip and long-term durability. Precision milling ensures a perfectly flat surface for consistent clutch engagement.

• Constructed from 1050 hardened steel for superior wear resistance
• Heat-treated friction plate for optimum grip and service life
• Pickled and oiled finish to prevent corrosion and ensure longevity
• Milled to exacting standards for high-performance tolerances
• Includes all-new hardware for a complete installation
• Manufacturer Part Number: 221001

Fits select 1997-2006 Chevrolet Corvette, Camaro and Pontiac Firebird, GTO models (5.7L / 6.0L). This Fidanza Performance aluminum flywheel is engineered to reduce rotational mass, providing significantly quicker acceleration and improved throttle response compared to heavy factory components.

By utilizing a billet 6061 T6 or 2024 T4 aluminum body, this flywheel is 40-60% lighter than stock, which lowers the Moment of Inertia (MOI) and allows the engine to transfer power to the drivetrain more efficiently. It features a replaceable friction plate, meaning you can service the flywheel without replacing the entire unit. For maximum durability, it is equipped with a hardened 1050 steel ring gear and military-spec fasteners.

• Material: Billet 6061 T6 or 2024 T4 aluminum body
• Friction Surface: Replaceable heat-treated friction plate for optimum grip
• Ring Gear: Hardened 1050 steel, replaceable
• Fasteners: Military-spec hardware for high-strength reliability
• Weight: 40-60% lighter than OEM for reduced MOI
• Installation: Direct bolt-on design with stepped dowels where applicable
• MPN: 198571

Fits select 2000-2010 Chevrolet, Oldsmobile, Pontiac, and Saturn models, including Cavalier, Cobalt, HHR, Solstice, Sky, and Ion.

The Fidanza Aluminum Flywheel (MPN 198281) is engineered to significantly reduce rotational mass and improve engine response. By lowering the Moment of Inertia (MOI), this lightweight flywheel allows for quicker acceleration and more efficient synchronization of engine speeds during gear changes. This unit is 40-60% lighter than factory cast-iron flywheels, freeing up horsepower by reducing parasitic drag on the drivetrain.

Built for performance and longevity, the flywheel features a CNC-machined body made from billet 6061 T6 or 2024 T4 aluminum. It is equipped with a replaceable 1050 steel friction plate secured by military-spec fasteners, allowing for easy servicing without needing to replace the entire flywheel. The hardened steel ring gear is heat-treated to ensure reliable starter engagement and long-term durability under high-stress conditions.

• Material: Billet 6061 T6 or 2024 T4 aluminum body
• Weight Reduction: 40-60% lighter than OEM for faster throttle response
• Friction Surface: Replaceable heat-treated friction plate for optimum grip
• Ring Gear: Hardened 1050 steel for maximum strength
• Hardware: Military-spec fasteners and stepped dowels for precision fitment
• Serviceability: Bolt-on replaceable friction plate design
• Manufacturer Part Number: 198281

Fits select 1991-1999 BMW 318i, 318is, 318ti, 325i, 325is, 328i, 328is, M3, and Z3 (1.9L / 3.2L).

This Fidanza aluminum flywheel (MPN 195321) is engineered to significantly reduce rotational mass, weighing 40-60% less than factory units. By lowering the moment of inertia, this flywheel allows your engine to reach its powerband faster, delivering sharper throttle response and improved acceleration. The high-performance body is CNC machined from billet 6061 T6 or 2024 T4 aluminum, providing a lightweight yet rigid foundation for spirited driving or track applications.

• Construction: Billet 6061 T6 or 2024 T4 aluminum body
• Friction Surface: Replaceable 1050 steel friction plate for extended service life
• Ring Gear: Hardened 1050 steel ring gear for reliable starter engagement
• Fasteners: Military-spec fasteners ensure maximum strength and reliability
• Performance: 40-60% weight reduction compared to stock for quicker spooling
• Maintenance: Features stepped dowels and a bolt-on friction surface for easy rebuilding

Fits 1992-2002 Dodge Viper ACR, Base, GT2, GTS, and R/T-10 models (8.0L). This Fidanza aluminum flywheel is engineered to significantly reduce rotational mass, weighing 40-60% less than the factory steel unit. By lowering the Moment of Inertia (MOI), this upgrade allows your 8.0L V10 to reach its powerband faster, delivering sharper throttle response and quicker acceleration through the gears.

Constructed from high-tensile billet 6061 T6 or 2024 T4 aluminum, the flywheel body provides exceptional strength without the weight. Unlike one-piece designs, this flywheel features a bolt-on, replaceable friction plate made from heat-treated 1050 steel. This ensures a durable, high-grip surface for your clutch while allowing for easy servicing without replacing the entire assembly. The hardened 1050 steel ring gear is also replaceable and secured with military-spec fasteners for maximum reliability under high-load conditions.

• Billet 6061 T6 or 2024 T4 aluminum body construction
• Heat-treated 1050 steel friction plate for optimum grip
• Replaceable friction plate design simplifies future clutch services
• Hardened 1050 steel ring gear for long-term durability
• Military-spec fasteners for superior strength and reliability
• 40-60% lighter than stock to reduce parasitic drag
• Stepped dowels (per application) for precise alignment
• Manufacturer Part Number: 194701

Fits select 1990-2001 Acura Integra, 1999-2000 Honda Civic Si, 1994-1997 Honda Civic del Sol VTEC, and 1998-2001 Honda CR-V.

The Fidanza 191681 Aluminum Flywheel is engineered to significantly reduce rotating mass, delivering quicker acceleration and sharper throttle response by shedding 40% to 60% of the weight compared to factory cast-iron units. Unlike some ultra-lightweight options that can compromise driveability, this flywheel is precision-balanced to maintain smooth idle quality and street manners while freeing up horsepower.

Constructed from high-tensile billet 6061-T6 aluminum, the body is paired with a replaceable 1050 steel friction surface. This modular design allows you to refresh the flywheel surface during clutch service without replacing the entire assembly. The unit features a hardened 1050 steel ring gear and military-spec hardware for long-term durability under high-performance driving conditions.

• Billet 6061-T6 aluminum body for superior heat dissipation and weight reduction
• Heat-treated replaceable 1050 steel friction plate for extended service life
• Hardened 1050 steel ring gear for reliable starter engagement
• 40% to 60% lighter than OEM components to improve engine rev speed
• Military-spec hardware and stepped dowels for precise fitment and strength
• Manufacturer Part Number: 191681

Fits 2002-2006 Acura RSX (Base and Type-S) and 2002-2011 Honda Civic Si (including MUGEN Si).

The Fidanza 8lb aluminum flywheel (MPN 191471) is engineered to reduce rotational mass and lower the Moment of Inertia (MOI), providing significantly faster throttle response and quicker acceleration. Weighing 40% to 60% less than stock units, it frees up horsepower by reducing parasitic drag without sacrificing idle quality or drivability. Unlike one-piece designs, this flywheel features a serviceable construction that allows for long-term performance and easy maintenance.

The body is CNC machined from high-tensile billet 6061 T6 or 2024 T4 aluminum for optimum heat dissipation and strength. It features a replaceable friction plate made from heat-treated 1050 steel, secured with military-spec fasteners. This modular design means you can refresh the clutch mating surface without replacing the entire assembly. The hardened 1050 steel ring gear is also replaceable and provides durable starter engagement.

• Part Number: 191471
• Weight: 8 lbs
• Body Material: Billet 6061 T6 or 2024 T4 Aluminum
• Friction Plate: Bolt-on Replaceable Heat-Treated 1050 Steel
• Ring Gear: Hardened 1050 Steel (Replaceable)
• Fasteners: Military Spec for maximum reliability
• Installation: Direct bolt-on fitment using stepped dowels where applicable

Fits select 1990-2005 Honda Civic, CRX, and Civic del Sol models. Engineered to reduce rotational mass and improve engine response, this Fidanza aluminum flywheel (MPN 191161) is a direct bolt-on upgrade for performance-oriented builds.

By reducing weight by 40% to 60% compared to heavy factory units, this flywheel significantly lowers the Moment of Inertia (MOI), allowing the engine to rev faster and transfer power to the drivetrain more efficiently. The main body is CNC machined from premium 6061 T4 or 2024 T4 billet aluminum for high strength and durability. To ensure longevity, it features a replaceable 1050 steel friction surface and a hardened 1050 steel ring gear, meaning you can refresh the flywheel without replacing the entire unit.

• Material: High-tensile Billet 6061 T6 or 2024 T4 Aluminum
• Friction Surface: Replaceable hardened 1050 steel plate with military-spec fasteners
• Ring Gear: Hardened 1050 steel for reliable starter engagement
• Weight: 40% to 60% lighter than OEM for increased acceleration and throttle response
• Precision: Stepped dowels for accurate alignment and balance
• Installation: Direct fit replacement for factory flywheel

Fits 1986-1995 Ford Mustang and 1986 Mercury Capri (5.0L).

The Fidanza 186501 Aluminum Flywheel is engineered to reduce rotational mass and lower the moment of inertia (MOI) for significantly faster throttle response and quicker acceleration. CNC machined from high-strength 6061 T6 or 2024 T3 aluminum, this flywheel is 40-60% lighter than factory cast iron units while maintaining the structural integrity required for high-performance driving. This model includes external balance parts specifically required for the 5.0L engine configurations.

Fidanza flywheels feature a unique two-piece design with a bolt-on friction plate made from hardened 1050 steel. This allows you to replace the friction surface rather than the entire flywheel when the clutch is serviced. The unit also utilizes military-spec fasteners and a replaceable 1050 steel ring gear for long-term durability and reliability.

• 40-60% weight reduction compared to stock for faster acceleration
• Machined from high-tensile billet 6061 T6 or 2024 T3 aluminum
• Replaceable 1050 steel friction plate and ring gear
• Military-spec fasteners for maximum hardware strength
• Stepped dowels for precise pressure plate alignment
• Includes necessary external balance hardware components
• Manufacturer Part Number: 186501

Fits select 1993-2002 Ford Probe and Mazda 626, MX-6 (2.5L).

Engineered to reduce rotational mass, the Fidanza aluminum flywheel (MPN 186471) is 40-60% lighter than stock components. This significant reduction in the Moment of Inertia (MOI) allows for faster throttle response and quicker acceleration by freeing up horsepower that would otherwise be used to turn a heavy cast iron flywheel. The body is CNC machined from billet 6061 T6 or 2024 T4 aluminum, providing a strong, lightweight foundation that withstands high-RPM use.

The friction surface is a heat-treated, bolt-on replaceable plate, ensuring optimum grip and long service life without requiring a total flywheel replacement when worn. Note: When selecting a replacement friction kit, confirm the bolt pattern (18 vs 20) for your specific flywheel before purchase.

• Material: Billet 6061 T6 or 2024 T4 aluminum body
• Ring Gear: Replaceable hardened 1050 steel
• Fasteners: Military-spec for maximum reliability and strength
• Features: Stepped dowels for precise alignment on most applications
• Weight: 40-60% reduction compared to factory OE flywheels
• MPN: 186471

Fits 2014-2016 Ford Fiesta ST.

The Fidanza Aluminum Flywheel (186161) is engineered to significantly reduce rotational mass, delivering faster throttle response and improved acceleration. By replacing the heavy factory component with a precision-machined billet 6061 T6 or 2024 T4 aluminum body, this flywheel is 40-60% lighter than the OEM unit. This massive reduction in the Moment of Inertia (MOI) allows the engine to rev more freely and transfer power to the drivetrain with less parasitic loss.

• Billet 6061 T6 or 2024 T4 aluminum construction for high strength and low weight
• Heat-treated, bolt-on replaceable friction plate for optimum grip and long-term serviceability
• Replaceable hardened 1050 steel ring gear for durability
• Military spec fasteners ensure maximum reliability under high-load conditions
• 40-60% lighter than stock for quicker engine acceleration
• Stepped dowels for precise alignment
• Direct bolt-on replacement for the factory flywheel
• Manufacturer Part Number: 186161

Fits 2013-2016 Ford Focus ST.

The Fidanza 186121 aluminum flywheel is engineered to reduce rotational mass and improve engine response. By reducing the Moment of Inertia (MOI), this flywheel allows for significantly faster throttle response and quicker acceleration. Typically weighing 40-60% less than the factory OE component, it minimizes parasitic drag to free up existing horsepower. The main body is CNC-machined from high-strength billet 6061 T6 or 2024 T4 aluminum for superior thermal capacity and durability.

• Replaceable Friction Plate: Features a bolt-on, heat-treated friction plate that provides optimum grip and long life. The replaceable design allows for easy maintenance without needing to replace the entire flywheel.
• Hardened Steel Ring Gear: Equipped with a replaceable 1050 hardened steel ring gear for reliable starter engagement.
• Military-Spec Fasteners: Built with military-standard fasteners to ensure maximum strength and reliability under high-RPM use.
• Precision Fit: Includes stepped dowels where applicable for precise alignment and a direct bolt-on installation.
• Manufacturer Part Number: 186121

Fits 1968-1975 Triumph TR250 and TR6 (2.5L).

The Fidanza 172661 Aluminum Flywheel is engineered to significantly reduce rotational mass, offering a 40% to 60% weight reduction compared to heavy factory cast-iron units. By lowering the Moment of Inertia (MOI), this performance flywheel allows your Triumph 2.5L engine to rev more freely, delivering sharper throttle response and faster acceleration through the gears. The main body is CNC-machined from high-tensile billet 6061 T6 or 2024 T4 aluminum for superior strength and heat dissipation.

Unlike many performance flywheels, this unit is designed for long-term serviceability. It features a bolt-on replaceable 1050 steel friction plate, allowing you to refresh the clutch surface without replacing the entire flywheel. The hardened 1050 steel ring gear is secured with military-spec fasteners to ensure reliable starter engagement and hardware integrity under high-RPM use.

• Manufacturer Part Number: 172661
• Material: Billet 6061 T6 or 2024 T4 Aluminum Body
• Friction Plate: Replaceable heat-treated steel for optimum grip and longevity
• Ring Gear: Hardened 1050 steel for durability
• Hardware: High-strength military-spec fasteners
• Design: Stepped dowels included for precise alignment on most applications
• Performance: 40-60% lighter than stock for reduced parasitic drag

Fits 1973-1980 Triumph Spitfire Base models.

The Fidanza Performance Aluminum Flywheel (MPN 172151) is designed to significantly reduce rotational mass, providing faster throttle response and quicker acceleration. By being 40-60% lighter than the factory cast iron unit, this flywheel lowers the engine's Moment of Inertia (MOI), allowing more horsepower to be delivered directly to the wheels rather than being spent spinning a heavy rotating assembly.

Constructed from high-tensile billet 6061 T6 or 2024 T4 aluminum, this flywheel is built for durability and precision. It features a unique bolt-on replaceable friction plate made from heat-treated 1050 steel, eliminating the need to resurface or replace the entire flywheel when the clutch surface wears. The hardened 1050 steel ring gear is also replaceable and is secured using high-strength military-spec fasteners for maximum reliability.

• CNC-machined billet aluminum body (6061 T6 or 2024 T4)
• Replaceable 1050 steel friction plate and ring gear for long-term serviceability
• 40-60% weight reduction compared to stock for improved engine efficiency
• Fastened with military-spec hardware for superior strength
• Stepped dowels included to ensure precise alignment
• Manufacturer Part Number: 172151

Fits 1991-1999 Mitsubishi 3000GT VR-4 and 1991-1996 Dodge Stealth R/T and R/T Turbo (3.0L).

The Fidanza 161301 aluminum flywheel is engineered to significantly reduce rotational mass compared to heavy factory cast-iron components. By weighing 40-60% less than stock, this flywheel lowers the Moment of Inertia (MOI), allowing your engine to reach its powerband faster and providing noticeably sharper throttle response and acceleration. The main body is CNC-machined from high-strength billet 6061 T6 or 2024 T4 aluminum.

Designed for longevity and serviceability, this flywheel features a bolt-on replaceable friction plate made from heat-treated steel, providing an optimum mating surface for the clutch disc without the need to replace the entire flywheel. A hardened 1050 steel ring gear and military-spec fasteners ensure the assembly maintains its structural integrity under high-performance driving conditions.

• Manufacturer Part Number: 161301
• Material: Billet 6061 T6 / 2024 T4 Aluminum body
• Friction Plate: Replaceable heat-treated steel
• Ring Gear: Hardened 1050 steel
• Weight Reduction: 40-60% lighter than OEM
• Hardware: Military-spec fasteners
• Alignment: Precision stepped dowels

Fits select 1983-1993 Mazda 626, MX-6, B2000, B2200, and Ford Probe models equipped with the 2.2L non-turbo engine.

Designed to reduce rotational mass and improve engine response, the Fidanza 161221 aluminum flywheel is engineered for performance. By reducing the weight of the flywheel by 40-60 percent compared to heavy cast-iron factory units, this component lowers the moment of inertia (MOI), allowing for faster throttle response and improved acceleration. The body is CNC-machined from high-quality billet 6061 T6 or 2024 T4 aluminum to ensure durability and precision balancing.

A standout feature of Fidanza flywheels is the bolt-on replaceable friction plate made from heat-treated steel, which provides optimum grip and long service life. When the friction surface eventually wears, it can be replaced individually without needing to replace the entire flywheel. The assembly is secured with military-spec fasteners for maximum strength and features a hardened 1050 steel ring gear for reliable starter engagement.

• Manufacturer Part Number: 161221
• Body Material: Billet 6061 T6 or 2024 T4 Aluminum
• Ring Gear Material: Hardened 1050 Steel
• Friction Surface: Heat-treated, bolt-on replaceable plate
• Fasteners: Military-spec for increased reliability
• Alignment: Stepped dowels included for precise installation

Note: When selecting a replacement friction kit, please confirm the bolt pattern (18 vs 20) for your specific flywheel before purchase.

Fits 2006-2014 Mazda MX-5 Miata models equipped with the 2.0L engine.

This Fidanza Aluminum Flywheel (MPN 161201) is engineered to reduce rotational mass, providing 40% to 60% weight reduction compared to stock OE units. By lowering the Moment of Inertia (MOI), this flywheel allows the engine to reach its power band faster, significantly improving throttle response and acceleration. The body is CNC-machined from high-grade billet 6061 T6 or 2024 T4 aluminum for exceptional strength and heat dissipation.

Designed for longevity and serviceability, it features a replaceable 1050 steel ring gear and a bolt-on heat-treated friction plate. This modular design allows you to replace the friction surface without replacing the entire flywheel. High-strength military-spec fasteners are used throughout for maximum reliability under high-RPM conditions.

• Billet 6061 T6 or 2024 T4 aluminum body construction
• 40-60% lighter than factory flywheel for quicker acceleration
• Replaceable hardened 1050 steel ring gear
• Replaceable heat-treated friction plate for optimum clutch grip
• Military-spec fasteners for increased strength
• Stepped dowels for precise alignment
• Manufacturer Part Number: 161201

Fits 1994-2005 Mazda Miata models including Base, LS, Mazdaspeed, M Edition, SE, Shinsen, STO, and 10th Anniversary.

The Fidanza 161181 8lb aluminum flywheel is a high-performance upgrade designed to significantly reduce rotational mass and the Moment of Inertia (MOI). This reduction in weight—40-60% lighter than stock cast-iron flywheels—frees up horsepower and allows for faster throttle response and quicker acceleration. The body is CNC-machined from billet 6061 T6 or 2024 T4 aluminum for strength and durability.

Unlike one-piece flywheels, Fidanza units feature a bolt-on replaceable 1050 steel friction plate, allowing for easy servicing without replacing the entire unit. When selecting a replacement friction kit, please confirm whether your specific flywheel uses an 18-bolt or 20-bolt pattern.

• Precision Construction: Billet aluminum body with a hardened 1050 steel ring gear for long service life.
• Optimum Grip: Heat-treated friction plate provides excellent clutch engagement and longevity.
• Serviceability: Replaceable friction surface saves time and money on future clutch jobs.
• Hardware: Assembled with military-spec fasteners for maximum reliability under high-load conditions.

• MPN: 161181
• Weight: 8 lbs
• Material: 6061 T6 / 2024 T4 Aluminum body
• Ring Gear: Hardened 1050 Steel

Fits 1990-1993 Mazda Miata Base, LE, and SE models. Specifically engineered to reduce rotating mass, this Fidanza aluminum flywheel weighs just 8 lbs, making it 40-60% lighter than the factory component.

By lowering the Moment of Inertia (MOI), this flywheel (MPN 161161) allows the engine to transfer power more efficiently and rev faster, resulting in quicker acceleration and sharper throttle response. The body is CNC-machined from high-strength billet 6061 T6 or 2024 T4 aluminum for durability and precise tolerances. For long-term serviceability, it features a bolt-on replaceable friction plate made from heat-treated 1050 steel, allowing you to refresh the clutch surface without replacing the entire flywheel.

• Weight: 8 lbs
• Body Material: Billet 6061 T6 / 2024 T4 Aluminum
• Friction Surface: Replaceable heat-treated 1050 steel plate
• Ring Gear: Replaceable hardened 1050 steel
• Fasteners: Military-spec hardware for maximum reliability
• Fitment: Uses stepped dowels for accurate alignment on most applications

Fits 2008-2015 Mitsubishi Lancer Evolution models including GSR, MR, SE, and Final Edition (4B11T).

The Fidanza 161081 aluminum flywheel is engineered to reduce rotating mass and lower the moment of inertia (MOI), delivering significantly faster throttle response and quicker acceleration. Weighing just 9.0 lbs compared to the 13.4 lb factory unit, this high-performance upgrade reduces parasitic drag on the engine to free up horsepower. Constructed from premium billet 6061 T6 or 2024 T4 aluminum, it features a replaceable 1050 steel friction plate and ring gear, allowing for cost-effective servicing without replacing the entire unit.

• Manufacturer Part Number: 161081
• Weight: 9.0 lbs (replaces 13.4 lb OEM unit)
• Material: Billet 6061 T6 or 2024 T4 aluminum body
• Ring Gear: Hardened 1050 steel for long-term reliability
• Friction Plate: Bolt-on replaceable heat-treated friction plate for optimum grip
• Hardware: Military-spec fasteners for maximum strength
• Alignment: Stepped dowels for precise fitment on most applications

Fits 2007-2013 Mazda 3 Mazdaspeed and 2006-2007 Mazda 6 Mazdaspeed. This Fidanza aluminum flywheel (MPN 161071) is engineered to reduce rotating mass, significantly lowering the moment of inertia for faster throttle response and improved acceleration. By reducing weight by 40% to 60% compared to factory dual-mass or heavy steel units, this flywheel frees up horsepower without compromising daily drivability.

Constructed from high-tensile 6061 T6 or 2024 T3 aluminum, the flywheel features a heat-treated, bolt-on replaceable 1050 steel friction plate. This design allows for easier servicing—when the friction surface wears, you can replace the plate rather than the entire flywheel. The assembly is secured with military-spec fasteners for maximum reliability under high-RPM conditions.

• Material: 6061 T6 or 2024 T3 Billet Aluminum body
• Friction Surface: Replaceable heat-treated 1050 steel plate
• Ring Gear: Hardened 1050 steel for durability
• Fasteners: Military-spec hardware
• Weight Reduction: 40-60% lighter than OEM for reduced MOI
• Installation: Stepped dowels for precise alignment
• Manufacturer Part Number: 161071

Fits 1991-1999 Mitsubishi 3000GT and 1991-1996 Dodge Stealth (3.0L).

The Fidanza 161001 Aluminum Flywheel is engineered to reduce rotational mass and Moment of Inertia (MOI), significantly improving throttle response and acceleration. By being 40-60% lighter than factory cast iron units, this flywheel frees up horsepower that would otherwise be spent spinning a heavy stock component. Constructed from a high-grade Billet 6061 T6 or 2024 T4 aluminum body, it provides the strength needed for high-performance applications while maintaining excellent heat dissipation.

Durability is handled by a replaceable hardened 1050 steel ring gear and a bolt-on heat-treated friction plate. This design allows for easy servicing; when the friction surface wears, you can replace the plate rather than the entire flywheel. Note: when selecting a replacement friction kit, confirm your specific flywheel's bolt pattern (18 vs 20) before purchase.

• Billet 6061 T6 or 2024 T4 aluminum body for high strength and low weight
• Replaceable 1050 steel ring gear for long service life
• Heat-treated friction plate for optimum clutch grip
• Military spec fasteners for maximum reliability and strength
• Stepped dowels (on most applications) for precise alignment
• Lighter than stock for faster engine revving and improved power delivery
• Manufacturer Part Number: 161001

Fits 1990-1996 Nissan 300ZX Turbo (3.0L).

Designed to significantly reduce rotational mass, this 10.5lb Fidanza aluminum flywheel improves throttle response and acceleration by freeing up horsepower that was previously spent turning a heavy factory unit. Unlike cast iron flywheels, this performance upgrade is constructed from high-quality billet 6061 T6 or 2024 T4 aluminum, providing a 40-60% weight reduction over stock components while maintaining the structural integrity required for high-RPM use.

A standout feature of this flywheel is the bolt-on replaceable friction plate made from heat-treated 1050 steel. This allows you to refresh the clutch mating surface without replacing the entire flywheel. The unit also features a hardened 1050 steel ring gear and military-spec fasteners for maximum durability under aggressive driving conditions.

• Manufacturer Part Number: 143331
• Weight: 10.5 lbs
• Material: Billet 6061 T6 or 2024 T4 Aluminum
• Friction Plate: Replaceable Heat-Treated 1050 Steel
• Ring Gear: Hardened 1050 Steel
• Fasteners: Military Spec
• Lower Moment of Inertia (MOI) for faster throttle response

Fits select 1984-1995 Nissan 300ZX, D21, Pathfinder, and Pickup models (3.0L).

The Fidanza 143301 aluminum flywheel is engineered to reduce rotating mass, significantly lowering the moment of inertia (MOI) for faster throttle response and quicker acceleration. Machined from high-quality billet 6061 T6 or 2024 T4 aluminum, this flywheel is 40% to 60% lighter than the factory cast iron unit, freeing up horsepower that was previously lost to parasitic drag.

For long-term serviceability, Fidanza features a bolt-on replaceable friction plate made from 1045 or 1050 steel, allowing you to refresh the clutch surface without replacing the entire flywheel. The assembly is secured with military-spec fasteners and features a heat-treated 1050 steel ring gear for maximum durability under high-stress driving conditions.

• Material: Billet 6061 T6 or 2024 T4 Aluminum
• Friction Surface: Replaceable 1050 steel plate
• Ring Gear: 1050 steel, heat-treated for longevity
• Fasteners: Military-grade hardware
• Weight: 40% to 60% lighter than OEM
• MPN: 143301

Fits 1970-1983 Nissan 240Z, 260Z, 280Z, and 280ZX models (2.8L).

Fidanza performance flywheels are engineered to reduce the moment of inertia, significantly improving throttle response and acceleration by freeing up horsepower previously lost to rotating mass. At 40% to 60% lighter than factory cast iron units, this aluminum flywheel allows the engine to reach its powerband faster without sacrificing reliability.

The body is CNC-machined from billet 6061 T6 or 2024 T4 aluminum and features a bolt-on replaceable friction plate made from heat-treated 1050 steel. This modular design allows you to service the friction surface during clutch changes without replacing or resurfacing the entire flywheel. For maximum durability, the assembly uses military-spec fasteners and a hardened 1050 steel ring gear.

• Body Material: Billet 6061 T6 / 2024 T4 Aluminum
• Friction Plate: Replaceable heat-treated 1050 steel
• Ring Gear: Hardened 1050 steel
• Fasteners: Military-spec hardware
• Weight Reduction: 40-60% lighter than OEM
• Alignment: Stepped dowels for precise fitment
• Manufacturer Part Number: 143281

Fits 1989-1998 Nissan Skyline R32 and R33 models equipped with RB25DE or RB25DET engines.

The Fidanza aluminum flywheel (MPN 143261) is engineered to reduce rotational mass, delivering significantly faster throttle response and improved acceleration. By weighing 40-60% less than stock cast-iron units, this flywheel lowers the engine's Moment of Inertia (MOI), allowing the powertrain to free up horsepower that was previously lost to parasitic drag.

Built for durability and performance, the body is CNC-machined from high-tensile 6061 T6 or 2024 T4 billet aluminum. It features a replaceable friction plate made from heat-treated steel, providing optimum clutch grip and long-term serviceability. Rather than resurfacing the entire unit, the bolt-on friction surface can be replaced during clutch swaps, extending the life of the flywheel indefinitely.

• Billet 6061 T6 or 2024 T4 aluminum body construction
• Hardened 1050 steel replaceable ring gear
• Replaceable heat-treated friction plate for maximum grip
• 40-60% lighter than factory flywheels for quicker revs
• Military-spec fasteners for superior strength and reliability
• Stepped dowels for precise alignment on most applications
• Manufacturer Part Number: 143261

Fits select 1989-1998 Nissan 240SX (Base, LE, SE, XE) equipped with the KA24DE engine.

This Fidanza Performance aluminum flywheel (MPN 143241) is engineered to reduce rotational mass, delivering significantly faster throttle response and improved acceleration. By reducing the Moment of Inertia (MOI), this flywheel frees up horsepower previously lost to a heavy factory drivetrain. It weighs approximately 40-60% less than the stock cast iron flywheel, making it an essential upgrade for high-performance KA24DE builds.

The flywheel body is CNC-machined from high-strength billet 6061 T6 or 2024 T4 aluminum and features a replaceable hardened 1050 steel ring gear. For long-term serviceability, it utilizes a bolt-on replaceable friction plate made from heat-treated steel, allowing for easy maintenance without replacing the entire unit. Assembly is secured with military-spec fasteners for maximum strength under high-load conditions.

• Manufacturer Part Number: 143241
• Body Material: Billet 6061 T6 / 2024 T4 Aluminum
• Friction Plate: Replaceable Heat-Treated Steel
• Ring Gear: 1050 Hardened Steel
• Hardware: Military Spec Fasteners
• Alignment: Includes stepped dowels for precise fitment
• Weight Reduction: 40-60% lighter than OE stock